1 files changed, 1 insertions, 136 deletions
diff --git a/dts/Bindings/reserved-memory/reserved-memory.txt b/dts/Bindings/reserved-memory/reserved-memory.txt
index bac4afa3b1..8ce72996d5 100644
--- a/dts/Bindings/reserved-memory/reserved-memory.txt
+++ b/dts/Bindings/reserved-memory/reserved-memory.txt
@@ -1,136 +1 @@
-*** Reserved memory regions ***
-
-Reserved memory is specified as a node under the /reserved-memory node.
-The operating system shall exclude reserved memory from normal usage
-one can create child nodes describing particular reserved (excluded from
-normal use) memory regions. Such memory regions are usually designed for
-the special usage by various device drivers.
-
-Parameters for each memory region can be encoded into the device tree
-with the following nodes:
-
-/reserved-memory node
----------------------
-#address-cells, #size-cells (required) - standard definition
-    - Should use the same values as the root node
-ranges (required) - standard definition
-    - Should be empty
-
-/reserved-memory/ child nodes
------------------------------
-Each child of the reserved-memory node specifies one or more regions of
-reserved memory. Each child node may either use a 'reg' property to
-specify a specific range of reserved memory, or a 'size' property with
-optional constraints to request a dynamically allocated block of memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
-address (@<address>) should be appended to the name if the node is a
-static allocation.
-
-Properties:
-Requires either a) or b) below.
-a) static allocation
-   reg (required) - standard definition
-b) dynamic allocation
-   size (required) - length based on parent's #size-cells
-                   - Size in bytes of memory to reserve.
-   alignment (optional) - length based on parent's #size-cells
-                        - Address boundary for alignment of allocation.
-   alloc-ranges (optional) - prop-encoded-array (address, length pairs).
-                           - Specifies regions of memory that are
-                             acceptable to allocate from.
-
-If both reg and size are present, then the reg property takes precedence
-and size is ignored.
-
-Additional properties:
-compatible (optional) - standard definition
-    - may contain the following strings:
-        - shared-dma-pool: This indicates a region of memory meant to be
-          used as a shared pool of DMA buffers for a set of devices. It can
-          be used by an operating system to instantiate the necessary pool
-          management subsystem if necessary.
-        - vendor specific string in the form <vendor>,[<device>-]<usage>
-no-map (optional) - empty property
-    - Indicates the operating system must not create a virtual mapping
-      of the region as part of its standard mapping of system memory,
-      nor permit speculative access to it under any circumstances other
-      than under the control of the device driver using the region.
-reusable (optional) - empty property
-    - The operating system can use the memory in this region with the
-      limitation that the device driver(s) owning the region need to be
-      able to reclaim it back. Typically that means that the operating
-      system can use that region to store volatile or cached data that
-      can be otherwise regenerated or migrated elsewhere.
-
-Linux implementation note:
-- If a "linux,cma-default" property is present, then Linux will use the
-  region for the default pool of the contiguous memory allocator.
-
-- If a "linux,dma-default" property is present, then Linux will use the
-  region for the default pool of the consistent DMA allocator.
-
-Device node references to reserved memory
------------------------------------------
-Regions in the /reserved-memory node may be referenced by other device
-nodes by adding a memory-region property to the device node.
-
-memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
-
-Example
--------
-This example defines 3 contiguous regions are defined for Linux kernel:
-one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
-one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
-one for multimedia processing (named multimedia-memory@77000000, 64MiB).
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* global autoconfigured region for contiguous allocations */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0x4000000>;
-			alignment = <0x2000>;
-			linux,cma-default;
-		};
-
-		display_reserved: framebuffer@78000000 {
-			reg = <0x78000000 0x800000>;
-		};
-
-		multimedia_reserved: multimedia@77000000 {
-			compatible = "acme,multimedia-memory";
-			reg = <0x77000000 0x4000000>;
-		};
-	};
-
-	/* ... */
-
-	fb0: video@12300000 {
-		memory-region = <&display_reserved>;
-		/* ... */
-	};
-
-	scaler: scaler@12500000 {
-		memory-region = <&multimedia_reserved>;
-		/* ... */
-	};
-
-	codec: codec@12600000 {
-		memory-region = <&multimedia_reserved>;
-		/* ... */
-	};
-};
+This file has been moved to reserved-memory.yaml in the dtschema repository.