summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/reserved-memory/reserved-memory.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/reserved-memory/reserved-memory.txt')
-rw-r--r--dts/Bindings/reserved-memory/reserved-memory.txt172
1 files changed, 1 insertions, 171 deletions
diff --git a/dts/Bindings/reserved-memory/reserved-memory.txt b/dts/Bindings/reserved-memory/reserved-memory.txt
index 39b5f4c5a5..8ce72996d5 100644
--- a/dts/Bindings/reserved-memory/reserved-memory.txt
+++ b/dts/Bindings/reserved-memory/reserved-memory.txt
@@ -1,171 +1 @@
-*** Reserved memory regions ***
-
-Reserved memory is specified as a node under the /reserved-memory node.
-The operating system shall exclude reserved memory from normal usage
-one can create child nodes describing particular reserved (excluded from
-normal use) memory regions. Such memory regions are usually designed for
-the special usage by various device drivers.
-
-Parameters for each memory region can be encoded into the device tree
-with the following nodes:
-
-/reserved-memory node
----------------------
-#address-cells, #size-cells (required) - standard definition
- - Should use the same values as the root node
-ranges (required) - standard definition
- - Should be empty
-
-/reserved-memory/ child nodes
------------------------------
-Each child of the reserved-memory node specifies one or more regions of
-reserved memory. Each child node may either use a 'reg' property to
-specify a specific range of reserved memory, or a 'size' property with
-optional constraints to request a dynamically allocated block of memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
-address (@<address>) should be appended to the name if the node is a
-static allocation.
-
-Properties:
-Requires either a) or b) below.
-a) static allocation
- reg (required) - standard definition
-b) dynamic allocation
- size (required) - length based on parent's #size-cells
- - Size in bytes of memory to reserve.
- alignment (optional) - length based on parent's #size-cells
- - Address boundary for alignment of allocation.
- alloc-ranges (optional) - prop-encoded-array (address, length pairs).
- - Specifies regions of memory that are
- acceptable to allocate from.
-
-If both reg and size are present, then the reg property takes precedence
-and size is ignored.
-
-Additional properties:
-compatible (optional) - standard definition
- - may contain the following strings:
- - shared-dma-pool: This indicates a region of memory meant to be
- used as a shared pool of DMA buffers for a set of devices. It can
- be used by an operating system to instantiate the necessary pool
- management subsystem if necessary.
- - restricted-dma-pool: This indicates a region of memory meant to be
- used as a pool of restricted DMA buffers for a set of devices. The
- memory region would be the only region accessible to those devices.
- When using this, the no-map and reusable properties must not be set,
- so the operating system can create a virtual mapping that will be used
- for synchronization. The main purpose for restricted DMA is to
- mitigate the lack of DMA access control on systems without an IOMMU,
- which could result in the DMA accessing the system memory at
- unexpected times and/or unexpected addresses, possibly leading to data
- leakage or corruption. The feature on its own provides a basic level
- of protection against the DMA overwriting buffer contents at
- unexpected times. However, to protect against general data leakage and
- system memory corruption, the system needs to provide way to lock down
- the memory access, e.g., MPU. Note that since coherent allocation
- needs remapping, one must set up another device coherent pool by
- shared-dma-pool and use dma_alloc_from_dev_coherent instead for atomic
- coherent allocation.
- - vendor specific string in the form <vendor>,[<device>-]<usage>
-no-map (optional) - empty property
- - Indicates the operating system must not create a virtual mapping
- of the region as part of its standard mapping of system memory,
- nor permit speculative access to it under any circumstances other
- than under the control of the device driver using the region.
-reusable (optional) - empty property
- - The operating system can use the memory in this region with the
- limitation that the device driver(s) owning the region need to be
- able to reclaim it back. Typically that means that the operating
- system can use that region to store volatile or cached data that
- can be otherwise regenerated or migrated elsewhere.
-
-A node must not carry both the no-map and the reusable property as these are
-logically contradictory.
-
-Linux implementation note:
-- If a "linux,cma-default" property is present, then Linux will use the
- region for the default pool of the contiguous memory allocator.
-
-- If a "linux,dma-default" property is present, then Linux will use the
- region for the default pool of the consistent DMA allocator.
-
-Device node references to reserved memory
------------------------------------------
-Regions in the /reserved-memory node may be referenced by other device
-nodes by adding a memory-region property to the device node.
-
-memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
-memory-region-names (optional) - a list of names, one for each corresponding
- entry in the memory-region property
-
-Example
--------
-This example defines 4 contiguous regions for Linux kernel:
-one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
-one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB),
-one for multimedia processing (named multimedia-memory@77000000, 64MiB), and
-one for restricted dma pool (named restricted_dma_reserved@0x50000000, 64MiB).
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- memory {
- reg = <0x40000000 0x40000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* global autoconfigured region for contiguous allocations */
- linux,cma {
- compatible = "shared-dma-pool";
- reusable;
- size = <0x4000000>;
- alignment = <0x2000>;
- linux,cma-default;
- };
-
- display_reserved: framebuffer@78000000 {
- reg = <0x78000000 0x800000>;
- };
-
- multimedia_reserved: multimedia@77000000 {
- compatible = "acme,multimedia-memory";
- reg = <0x77000000 0x4000000>;
- };
-
- restricted_dma_reserved: restricted_dma_reserved {
- compatible = "restricted-dma-pool";
- reg = <0x50000000 0x4000000>;
- };
- };
-
- /* ... */
-
- fb0: video@12300000 {
- memory-region = <&display_reserved>;
- /* ... */
- };
-
- scaler: scaler@12500000 {
- memory-region = <&multimedia_reserved>;
- /* ... */
- };
-
- codec: codec@12600000 {
- memory-region = <&multimedia_reserved>;
- /* ... */
- };
-
- pcie_device: pcie_device@0,0 {
- reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
- 0x83010000 0x0 0x00100000 0x0 0x00100000>;
- memory-region = <&restricted_dma_reserved>;
- /* ... */
- };
-};
+This file has been moved to reserved-memory.yaml in the dtschema repository.