diff options
Diffstat (limited to 'dts/Bindings/reserved-memory/reserved-memory.txt')
| -rw-r--r-- | dts/Bindings/reserved-memory/reserved-memory.txt | 36 |
1 files changed, 33 insertions, 3 deletions
diff --git a/dts/Bindings/reserved-memory/reserved-memory.txt b/dts/Bindings/reserved-memory/reserved-memory.txt index e8d3096d92..39b5f4c5a5 100644 --- a/dts/Bindings/reserved-memory/reserved-memory.txt +++ b/dts/Bindings/reserved-memory/reserved-memory.txt @@ -51,6 +51,23 @@ compatible (optional) - standard definition used as a shared pool of DMA buffers for a set of devices. It can be used by an operating system to instantiate the necessary pool management subsystem if necessary. + - restricted-dma-pool: This indicates a region of memory meant to be + used as a pool of restricted DMA buffers for a set of devices. The + memory region would be the only region accessible to those devices. + When using this, the no-map and reusable properties must not be set, + so the operating system can create a virtual mapping that will be used + for synchronization. The main purpose for restricted DMA is to + mitigate the lack of DMA access control on systems without an IOMMU, + which could result in the DMA accessing the system memory at + unexpected times and/or unexpected addresses, possibly leading to data + leakage or corruption. The feature on its own provides a basic level + of protection against the DMA overwriting buffer contents at + unexpected times. However, to protect against general data leakage and + system memory corruption, the system needs to provide way to lock down + the memory access, e.g., MPU. Note that since coherent allocation + needs remapping, one must set up another device coherent pool by + shared-dma-pool and use dma_alloc_from_dev_coherent instead for atomic + coherent allocation. - vendor specific string in the form <vendor>,[<device>-]<usage> no-map (optional) - empty property - Indicates the operating system must not create a virtual mapping @@ -85,10 +102,11 @@ memory-region-names (optional) - a list of names, one for each corresponding Example ------- -This example defines 3 contiguous regions are defined for Linux kernel: +This example defines 4 contiguous regions for Linux kernel: one default of all device drivers (named linux,cma@72000000 and 64MiB in size), -one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and -one for multimedia processing (named multimedia-memory@77000000, 64MiB). +one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), +one for multimedia processing (named multimedia-memory@77000000, 64MiB), and +one for restricted dma pool (named restricted_dma_reserved@0x50000000, 64MiB). / { #address-cells = <1>; @@ -120,6 +138,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB). compatible = "acme,multimedia-memory"; reg = <0x77000000 0x4000000>; }; + + restricted_dma_reserved: restricted_dma_reserved { + compatible = "restricted-dma-pool"; + reg = <0x50000000 0x4000000>; + }; }; /* ... */ @@ -138,4 +161,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB). memory-region = <&multimedia_reserved>; /* ... */ }; + + pcie_device: pcie_device@0,0 { + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + memory-region = <&restricted_dma_reserved>; + /* ... */ + }; }; |