4 files changed, 77 insertions, 19 deletions
diff --git a/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt b/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt
new file mode 100644
index 0000000000..1d990bcc0b
--- /dev/null
+++ b/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt
@@ -0,0 +1,22 @@
+Broadcom STB wake-up Timer
+
+The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+ability to wake up the system from low-power suspend/standby modes.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-waketimer"
+- reg            : the register start and length for the WKTMR block
+- interrupts     : The TIMER interrupt
+- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
+                    interrupt controller node
+- clocks	 : The phandle to the UPG fixed clock (27Mhz domain)
+
+Example:
+
+waketimer@f0411580 {
+	compatible = "brcm,brcmstb-waketimer";
+	reg = <0xf0411580 0x14>;
+	interrupts = <0x3>;
+	interrupt-parent = <&aon_pm_l2_intc>;
+	clocks = <&upg_fixed>;
+};
diff --git a/dts/Bindings/rtc/cortina,gemini.txt b/dts/Bindings/rtc/cortina,gemini.txt
deleted file mode 100644
index 4ce4e794dd..0000000000
--- a/dts/Bindings/rtc/cortina,gemini.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Cortina Systems Gemini RTC
-
-Gemini SoC real-time clock.
-
-Required properties:
-- compatible : Should be "cortina,gemini-rtc"
-
-Examples:
-
-rtc@45000000 {
-	compatible = "cortina,gemini-rtc";
-	reg = <0x45000000 0x100>;
-	interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/dts/Bindings/rtc/faraday,ftrtc010.txt b/dts/Bindings/rtc/faraday,ftrtc010.txt
new file mode 100644
index 0000000000..e3938f5e0b
--- /dev/null
+++ b/dts/Bindings/rtc/faraday,ftrtc010.txt
@@ -0,0 +1,28 @@
+* Faraday Technology FTRTC010 Real Time Clock
+
+This RTC appears in for example the Storlink Gemini family of
+SoCs.
+
+Required properties:
+- compatible : Should be one of:
+  "faraday,ftrtc010"
+  "cortina,gemini-rtc", "faraday,ftrtc010"
+
+Optional properties:
+- clocks: when present should contain clock references to the
+  PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and
+  says the clock should be 1 Hz, but implementers actually seem
+  to choose different clocks here, like Cortina who chose
+  32768 Hz (a typical low-power clock).
+- clock-names: should name the clocks "PCLK" and "EXTCLK"
+  respectively.
+
+Examples:
+
+rtc@45000000 {
+	compatible = "cortina,gemini-rtc";
+	reg = <0x45000000 0x100>;
+	interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&foo 0>, <&foo 1>;
+	clock-names = "PCLK", "EXTCLK";
+};
diff --git a/dts/Bindings/rtc/st,stm32-rtc.txt b/dts/Bindings/rtc/st,stm32-rtc.txt
index e2837b9512..0a4c371a9b 100644
--- a/dts/Bindings/rtc/st,stm32-rtc.txt
+++ b/dts/Bindings/rtc/st,stm32-rtc.txt
@@ -1,17 +1,25 @@
 STM32 Real Time Clock
 
 Required properties:
-- compatible: "st,stm32-rtc".
+- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
+  the device is compatible with stm32(f4/f7) or stm32h7.
 - reg: address range of rtc register set.
-- clocks: reference to the clock entry ck_rtc.
+- clocks: can use up to two clocks, depending on part used:
+  - "rtc_ck": RTC clock source.
+    It is required on stm32(f4/f7) and stm32h7.
+  - "pclk": RTC APB interface clock.
+    It is not present on stm32(f4/f7).
+    It is required on stm32h7.
+- clock-names: must be "rtc_ck" and "pclk".
+    It is required only on stm32h7.
 - interrupt-parent: phandle for the interrupt controller.
 - interrupts: rtc alarm interrupt.
 - st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
   (RTC registers) write protection.
 
-Optional properties (to override default ck_rtc parent clock):
-- assigned-clocks: reference to the ck_rtc clock entry.
-- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
+Optional properties (to override default rtc_ck parent clock):
+- assigned-clocks: reference to the rtc_ck clock entry.
+- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
 
 Example:
 
@@ -25,3 +33,17 @@ Example:
 		interrupts = <17 1>;
 		st,syscfg = <&pwrcfg>;
 	};
+
+	rtc: rtc@58004000 {
+		compatible = "st,stm32h7-rtc";
+		reg = <0x58004000 0x400>;
+		clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+		clock-names = "pclk", "rtc_ck";
+		assigned-clocks = <&rcc RTC_CK>;
+		assigned-clock-parents = <&rcc LSE_CK>;
+		interrupt-parent = <&exti>;
+		interrupts = <17 1>;
+		interrupt-names = "alarm";
+		st,syscfg = <&pwrcfg>;
+		status = "disabled";
+	};