diff options
Diffstat (limited to 'dts/Bindings/security/tpm')
| -rw-r--r-- | dts/Bindings/security/tpm/st33zp24-i2c.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/security/tpm/st33zp24-spi.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/security/tpm/tpm_tis_mmio.txt | 2 |
3 files changed, 1 insertions, 3 deletions
diff --git a/dts/Bindings/security/tpm/st33zp24-i2c.txt b/dts/Bindings/security/tpm/st33zp24-i2c.txt index 6a4e0d30d8..0dc121b6ea 100644 --- a/dts/Bindings/security/tpm/st33zp24-i2c.txt +++ b/dts/Bindings/security/tpm/st33zp24-i2c.txt @@ -6,7 +6,6 @@ Required properties: - reg: address on the bus Optional ST33ZP24 Properties: -- interrupt-parent: phandle for the interrupt gpio controller - interrupts: GPIO interrupt to which the chip is connected - lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. If set, power must be present when the platform is going into sleep/hibernate mode. diff --git a/dts/Bindings/security/tpm/st33zp24-spi.txt b/dts/Bindings/security/tpm/st33zp24-spi.txt index 604dce901b..37198971f1 100644 --- a/dts/Bindings/security/tpm/st33zp24-spi.txt +++ b/dts/Bindings/security/tpm/st33zp24-spi.txt @@ -5,7 +5,6 @@ Required properties: - spi-max-frequency: Maximum SPI frequency (<= 10000000). Optional ST33ZP24 Properties: -- interrupt-parent: phandle for the interrupt gpio controller - interrupts: GPIO interrupt to which the chip is connected - lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. If set, power must be present when the platform is going into sleep/hibernate mode. diff --git a/dts/Bindings/security/tpm/tpm_tis_mmio.txt b/dts/Bindings/security/tpm/tpm_tis_mmio.txt index 41d7405451..7c6304426d 100644 --- a/dts/Bindings/security/tpm/tpm_tis_mmio.txt +++ b/dts/Bindings/security/tpm/tpm_tis_mmio.txt @@ -13,7 +13,7 @@ Required properties: "tcg,tpm-tis-mmio". Valid chip strings are: * "atmel,at97sc3204" - reg: The location of the MMIO registers, should be at least 0x5000 bytes -- interrupt-parent/interrupts: An optional interrupt indicating command completion. +- interrupts: An optional interrupt indicating command completion. Example: |