1 files changed, 86 insertions, 0 deletions
diff --git a/dts/Bindings/serial/qcom,serial-geni-qcom.yaml b/dts/Bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 0000000000..05a6999808
--- /dev/null
+++ b/dts/Bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-uart
+      - qcom,geni-debug-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: UART core irq
+      - description: Wakeup irq (RX GPIO)
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+    serial@a88000 {
+        compatible = "qcom,geni-uart";
+        reg = <0xa88000 0x7000>;
+        interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-0 = <&qup_uart0_default>;
+        pinctrl-names = "default";
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+...