diff options
Diffstat (limited to 'dts/Bindings/serial/renesas,sci-serial.txt')
-rw-r--r-- | dts/Bindings/serial/renesas,sci-serial.txt | 19 |
1 files changed, 17 insertions, 2 deletions
diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt index 106808b55b..eaca9da79d 100644 --- a/dts/Bindings/serial/renesas,sci-serial.txt +++ b/dts/Bindings/serial/renesas,sci-serial.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Must contain one or more of the following: - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. + - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART. - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. @@ -72,7 +73,21 @@ Required properties: family-specific and/or generic versions. - reg: Base address and length of the I/O registers used by the UART. - - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. + - interrupts: Must contain one or more interrupt-specifiers for the SCIx. + If a single interrupt is expressed, then all events are + multiplexed into this single interrupt. + + If multiple interrupts are provided by the hardware, the order + in which the interrupts are listed must match order below. Note + that some HW interrupt events may be muxed together resulting + in duplicate entries. + The interrupt order is as follows: + 1. Error (ERI) + 2. Receive buffer full (RXI) + 3. Transmit buffer empty (TXI) + 4. Break (BRI) + 5. Data Ready (DRI) + 6. Transmit End (TEI) - clocks: Must contain a phandle and clock-specifier pair for each entry in clock-names. @@ -89,7 +104,7 @@ Required properties: - "scif_clk" for the optional external clock source for the frequency divider (SCIF_CLK). -Note: Each enabled SCIx UART should have an alias correctly numbered in the +Note: Each enabled SCIx UART may have an optional "serialN" alias in the "aliases" node. Optional properties: |