diff options
Diffstat (limited to 'dts/Bindings/serial/rs485.txt')
| -rw-r--r-- | dts/Bindings/serial/rs485.txt | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/dts/Bindings/serial/rs485.txt b/dts/Bindings/serial/rs485.txt index 32b1fa1f2a..b8415936df 100644 --- a/dts/Bindings/serial/rs485.txt +++ b/dts/Bindings/serial/rs485.txt @@ -5,14 +5,13 @@ the built-in half-duplex mode. The properties described hereafter shall be given to a half-duplex capable UART node. -Required properties: +Optional properties: - rs485-rts-delay: prop-encoded-array <a b> where: * a is the delay between rts signal and beginning of data sent in milliseconds. it corresponds to the delay before sending data. * b is the delay between end of data sent and rts signal in milliseconds it corresponds to the delay after sending data and actual release of the line. - -Optional properties: + If this property is not specified, <0 0> is assumed. - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 feature at boot time. It can be disabled later with proper ioctl. - rs485-rx-during-tx: empty property that enables the receiving of data even |