1 files changed, 0 insertions, 71 deletions
diff --git a/dts/Bindings/soc/mediatek/pwrap.txt b/dts/Bindings/soc/mediatek/pwrap.txt
deleted file mode 100644
index 0581dbda48..0000000000
--- a/dts/Bindings/soc/mediatek/pwrap.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-MediaTek PMIC Wrapper Driver
-
-This document describes the binding for the MediaTek PMIC wrapper.
-
-On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
-is not directly visible to the CPU, but only through the PMIC wrapper
-inside the SoC. The communication between the SoC and the PMIC can
-optionally be encrypted. Also a non standard Dual IO SPI mode can be
-used to increase speed.
-
-IP Pairing
-
-on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
-The signals of these pins are routed over the SPI bus using the pwrap
-bridge. In the binding description below the properties needed for bridging
-are marked with "IP Pairing". These are optional on SoCs which do not support
-IP Pairing
-
-Required properties in pwrap device node.
-- compatible:
-	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
-	"mediatek,mt6765-pwrap" for MT6765 SoCs
-	"mediatek,mt6779-pwrap" for MT6779 SoCs
-	"mediatek,mt6797-pwrap" for MT6797 SoCs
-	"mediatek,mt6873-pwrap" for MT6873/8192 SoCs
-	"mediatek,mt7622-pwrap" for MT7622 SoCs
-	"mediatek,mt8135-pwrap" for MT8135 SoCs
-	"mediatek,mt8173-pwrap" for MT8173 SoCs
-	"mediatek,mt8183-pwrap" for MT8183 SoCs
-	"mediatek,mt8186-pwrap" for MT8186 SoCs
-	"mediatek,mt8195-pwrap" for MT8195 SoCs
-	"mediatek,mt8516-pwrap" for MT8516 SoCs
-- interrupts: IRQ for pwrap in SOC
-- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
-  "pwrap": Main registers base
-  "pwrap-bridge": bridge base (IP Pairing)
-- reg: Must contain an entry for each entry in reg-names.
-- clock-names: Must include the following entries:
-  "spi": SPI bus clock
-  "wrap": Main module clock
-- clocks: Must contain an entry for each entry in clock-names.
-
-Optional properities:
-- reset-names: Some SoCs include the following entries:
-  "pwrap"
-  "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
-- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
-  See the following for child node definitions:
-  Documentation/devicetree/bindings/mfd/mt6397.txt
-  or the regulator-only device as the child device of pwrap, such as MT6380.
-  See the following definitions for such kinds of devices.
-  Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
-Example:
-	pwrap: pwrap@1000f000 {
-		compatible = "mediatek,mt8135-pwrap";
-		reg = <0 0x1000f000 0 0x1000>,
-			<0 0x11017000 0 0x1000>;
-		reg-names = "pwrap", "pwrap-bridge";
-		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
-				<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
-		reset-names = "pwrap", "pwrap-bridge";
-		clocks = <&clk26m>, <&clk26m>;
-		clock-names = "spi", "wrap";
-
-		pmic {
-			compatible = "mediatek,mt6397";
-		};
-	};