summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/soc/qcom/qcom,geni-se.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/soc/qcom/qcom,geni-se.yaml')
-rw-r--r--dts/Bindings/soc/qcom/qcom,geni-se.yaml102
1 files changed, 4 insertions, 98 deletions
diff --git a/dts/Bindings/soc/qcom/qcom,geni-se.yaml b/dts/Bindings/soc/qcom/qcom,geni-se.yaml
index 95fcb43675..2bf5293fc9 100644
--- a/dts/Bindings/soc/qcom/qcom,geni-se.yaml
+++ b/dts/Bindings/soc/qcom/qcom,geni-se.yaml
@@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: GENI Serial Engine QUP Wrapper Controller
maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
@@ -64,116 +63,23 @@ required:
- ranges
patternProperties:
- "^.*@[0-9a-f]+$":
- type: object
- description: Common properties for GENI Serial Engine based I2C, SPI and
- UART controller.
-
- properties:
- reg:
- description: GENI Serial Engine register address and length.
- maxItems: 1
-
- clock-names:
- const: se
-
- clocks:
- description: Serial engine core clock needed by the device.
- maxItems: 1
-
- interconnects:
- minItems: 2
- maxItems: 3
-
- interconnect-names:
- minItems: 2
- items:
- - const: qup-core
- - const: qup-config
- - const: qup-memory
-
- required:
- - reg
- - clock-names
- - clocks
-
"spi@[0-9a-f]+$":
type: object
description: GENI serial engine based SPI controller. SPI in master mode
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
- $ref: /schemas/spi/spi-controller.yaml#
-
- properties:
- compatible:
- enum:
- - qcom,geni-spi
-
- interrupts:
- maxItems: 1
-
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- required:
- - compatible
- - interrupts
- - "#address-cells"
- - "#size-cells"
+ $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
"i2c@[0-9a-f]+$":
type: object
description: GENI serial engine based I2C controller.
- $ref: /schemas/i2c/i2c-controller.yaml#
-
- properties:
- compatible:
- enum:
- - qcom,geni-i2c
-
- interrupts:
- maxItems: 1
-
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- clock-frequency:
- description: Desired I2C bus clock frequency in Hz.
- default: 100000
-
- required:
- - compatible
- - interrupts
- - "#address-cells"
- - "#size-cells"
+ $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
"serial@[0-9a-f]+$":
type: object
description: GENI Serial Engine based UART Controller.
- $ref: /schemas/serial.yaml#
-
- properties:
- compatible:
- enum:
- - qcom,geni-uart
- - qcom,geni-debug-uart
-
- interrupts:
- minItems: 1
- items:
- - description: UART core irq
- - description: Wakeup irq (RX GPIO)
-
- required:
- - compatible
- - interrupts
+ $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
additionalProperties: false