summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml')
-rw-r--r--dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml269
1 files changed, 269 insertions, 0 deletions
diff --git a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
new file mode 100644
index 0000000000..af632d0e03
--- /dev/null
+++ b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+ with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+ resources can be written to the Trigger Command Set (TCS) registers and
+ using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+ sequence over an internal bus.
+
+ The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+ (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+ active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+ be written to from Linux. The structure of each DRV follows the same template
+ with a few variations that are captured by the properties here.
+
+ A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+ have powered off to facilitate idle power saving. TCS could be classified as::
+ ACTIVE - Triggered by Linux
+ SLEEP - Triggered by F/W
+ WAKE - Triggered by F/W
+ CONTROL - Triggered by F/W
+ See also:: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+ The order in which they are described in the DT, should match the hardware
+ configuration.
+
+ Requests can be made for the state of a resource, when the subsystem is
+ active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+ resource state will be an aggregate of the sleep votes from each of those
+ subsystems. Clients may request a sleep value for their shared resources in
+ addition to the active mode requests.
+
+ Drivers that want to use the RSC to communicate with RPMH must specify their
+ bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+ compatible:
+ const: qcom,rpmh-rsc
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ description:
+ The interrupt that trips when a message complete/response is received for
+ this DRV from the accelerators.
+ Number of interrupts must match number of DRV blocks.
+
+ label:
+ description:
+ Name for the RSC. The name would be used in trace logs.
+
+ qcom,drv-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The ID of the DRV in the RSC block that will be used by this controller.
+
+ qcom,tcs-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 4
+ maxItems: 4
+ items:
+ items:
+ - description: |
+ TCS type::
+ - ACTIVE_TCS
+ - SLEEP_TCS
+ - WAKE_TCS
+ - CONTROL_TCS
+ enum: [ 0, 1, 2, 3 ]
+ - description: Number of TCS
+ description: |
+ The tuple defining the configuration of TCS. Must have two cells which
+ describe each TCS type. The order of the TCS must match the hardware
+ configuration.
+
+ qcom,tcs-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The offset of the TCS blocks.
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: drv-0
+ - const: drv-1
+ - const: drv-2
+ - const: drv-3
+
+ power-domains:
+ maxItems: 1
+
+ bcm-voter:
+ $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+ clock-controller:
+ $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+ power-controller:
+ $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+ '^regulators(-[0-9])?$':
+ $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - qcom,drv-id
+ - qcom,tcs-config
+ - qcom,tcs-offset
+ - reg
+ - reg-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+ // 2, the register offsets for DRV2 start at 0D00, the register
+ // calculations are like this::
+ // DRV0: 0x179C0000
+ // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+ // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+ // TCS-OFFSET: 0xD00
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+ rsc@179c0000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x179c0000 0x10000>,
+ <0x179d0000 0x10000>,
+ <0x179e0000 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ label = "apps_rsc";
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>,
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 1>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ - |
+ // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+ // register offsets for DRV0 start at 01C00, the register calculations are
+ // like this::
+ // DRV0: 0xAF20000
+ // TCS-OFFSET: 0x1C00
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+ rsc@af20000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0xaf20000 0x10000>;
+ reg-names = "drv-0";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ label = "disp_rsc";
+ qcom,tcs-offset = <0x1c00>;
+ qcom,drv-id = <0>;
+ qcom,tcs-config = <ACTIVE_TCS 0>,
+ <SLEEP_TCS 1>,
+ <WAKE_TCS 1>,
+ <CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x18200000 0x10000>,
+ <0x18210000 0x10000>,
+ <0x18220000 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ label = "apps_rsc";
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>,
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
+
+ clock-controller {
+ compatible = "qcom,sm8350-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ power-controller {
+ compatible = "qcom,sm8350-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+ bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };