summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound/atmel-i2s.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/sound/atmel-i2s.txt')
-rw-r--r--dts/Bindings/sound/atmel-i2s.txt46
1 files changed, 0 insertions, 46 deletions
diff --git a/dts/Bindings/sound/atmel-i2s.txt b/dts/Bindings/sound/atmel-i2s.txt
deleted file mode 100644
index 40549f496a..0000000000
--- a/dts/Bindings/sound/atmel-i2s.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible: Should be "atmel,sama5d2-i2s".
-- reg: Should be the physical base address of the controller and the
- length of memory mapped region.
-- interrupts: Should contain the interrupt for the controller.
-- dmas: Should be one per channel name listed in the dma-names property,
- as described in atmel-dma.txt and dma.txt files.
-- dma-names: Two dmas have to be defined, "tx" and "rx".
- This IP also supports one shared channel for both rx and tx;
- if this mode is used, one "rx-tx" name must be used.
-- clocks: Must contain an entry for each entry in clock-names.
- Please refer to clock-bindings.txt.
-- clock-names: Should be one of each entry matching the clocks phandles list:
- - "pclk" (peripheral clock) Required.
- - "gclk" (generated clock) Optional (1).
- - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
- mux clock are optional and should only be set together, when Master Mode
- is required.
-
-Example:
-
- i2s@f8050000 {
- compatible = "atmel,sama5d2-i2s";
- reg = <0xf8050000 0x300>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(31))>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(32))>;
- dma-names = "tx", "rx";
- clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
- clock-names = "pclk", "gclk", "muxclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s0_default>;
- };