diff options
Diffstat (limited to 'dts/Bindings/sound/qcom,lpass-cpu.txt')
| -rw-r--r-- | dts/Bindings/sound/qcom,lpass-cpu.txt | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/dts/Bindings/sound/qcom,lpass-cpu.txt b/dts/Bindings/sound/qcom,lpass-cpu.txt index 21c648328b..32c2cdb3d3 100644 --- a/dts/Bindings/sound/qcom,lpass-cpu.txt +++ b/dts/Bindings/sound/qcom,lpass-cpu.txt @@ -30,6 +30,8 @@ Required properties: - reg : Must contain an address for each entry in reg-names. - reg-names : A list which must include the following entries: * "lpass-lpaif" +- #address-cells : Must be 1 +- #size-cells : Must be 0 @@ -37,6 +39,20 @@ Optional properties: - qcom,adsp : Phandle for the audio DSP node +By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. +The SD lines to use can be configured by adding subnodes for each of the DAIs. + +Required properties for each DAI (represented by a subnode): +- reg : Must be one of the DAI IDs + (usually part of dt-bindings header) +- qcom,playback-sd-lines: List of serial data lines to use for playback + Each SD line should be represented by a number from 0-3. +- qcom,capture-sd-lines : List of serial data lines to use for capture + Each SD line should be represented by a number from 0-3. + +Note that adding a subnode changes the default to "no lines configured", +so both playback and capture lines should be configured when a subnode is added. + Example: lpass@28100000 { @@ -51,4 +67,13 @@ lpass@28100000 { reg = <0x28100000 0x10000>; reg-names = "lpass-lpaif"; qcom,adsp = <&adsp>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Optional to set different MI2S SD lines */ + dai@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <0 1>; + }; }; |