diff options
Diffstat (limited to 'dts/Bindings/sound/st,stm32-sai.yaml')
| -rw-r--r-- | dts/Bindings/sound/st,stm32-sai.yaml | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/dts/Bindings/sound/st,stm32-sai.yaml b/dts/Bindings/sound/st,stm32-sai.yaml new file mode 100644 index 0000000000..f2443b6512 --- /dev/null +++ b/dts/Bindings/sound/st,stm32-sai.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Serial Audio Interface (SAI) + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +description: + The SAI interface (Serial Audio Interface) offers a wide set of audio + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. + The SAI contains two independent audio sub-blocks. Each sub-block has + its own clock generator and I/O lines controller. + +properties: + compatible: + enum: + - st,stm32f4-sai + - st,stm32h7-sai + + reg: + items: + - description: Base address and size of SAI common register set. + - description: Base address and size of SAI identification register set. + minItems: 1 + maxItems: 2 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + +patternProperties: + "^audio-controller@[0-9a-f]+$": + type: object + description: + Two subnodes corresponding to SAI sub-block instances A et B + can be defined. Subnode can be omitted for unsused sub-block. + + properties: + compatible: + description: Compatible for SAI sub-block A or B. + pattern: "st,stm32-sai-sub-[ab]" + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: sai_ck clock feeding the internal clock generator. + - description: MCLK clock from a SAI set as master clock provider. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: sai_ck + - const: MCLK + minItems: 1 + maxItems: 2 + + dmas: + maxItems: 1 + + dma-names: + description: | + rx: SAI sub-block is configured as a capture DAI. + tx: SAI sub-block is configured as a playback DAI. + enum: [ rx, tx ] + + st,sync: + description: + Configure the SAI sub-block as slave of another SAI sub-block. + By default SAI sub-block is in asynchronous mode. + Must contain the phandle and index of the SAI sub-block providing + the synchronization. + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - maxItems: 1 + + st,iec60958: + description: + If set, support S/PDIF IEC6958 protocol for playback. + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + allOf: + - $ref: /schemas/types.yaml#/definitions/flag + + "#clock-cells": + description: Configure the SAI device as master clock provider. + const: 0 + + required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-sai + + - then: + properties: + clocks: + items: + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + - const: x8k + - const: x11k + + - else: + properties: + clocks: + items: + - description: pclk feeds the peripheral bus interface. + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + - const: pclk + - const: x8k + - const: x11k + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + dmas = <&dmamux1 89 0x400 0x01>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + }; + }; + +... |