diff options
Diffstat (limited to 'dts/Bindings/sound/uniphier,aio.txt')
| -rw-r--r-- | dts/Bindings/sound/uniphier,aio.txt | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/dts/Bindings/sound/uniphier,aio.txt b/dts/Bindings/sound/uniphier,aio.txt new file mode 100644 index 0000000000..4ce68ed6f2 --- /dev/null +++ b/dts/Bindings/sound/uniphier,aio.txt @@ -0,0 +1,45 @@ +Socionext UniPhier SoC audio driver + +The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in +the same register space. + +Required properties: +- compatible : should be one of the following: + "socionext,uniphier-ld11-aio" + "socionext,uniphier-ld20-aio" + "socionext,uniphier-pxs2-aio" +- reg : offset and length of the register set for the device. +- interrupts : should contain I2S or S/PDIF interrupt. +- pinctrl-names : should be "default". +- pinctrl-0 : defined I2S signal pins for an external codec chip. +- clock-names : should include following entries: + "aio" +- clocks : a list of phandle, should contain an entry for each + entry in clock-names. +- reset-names : should include following entries: + "aio" +- resets : a list of phandle, should contain an entry for each + entry in reset-names. +- #sound-dai-cells: should be 1. + +Optional properties: +- socionext,syscon: a phandle, should contain soc-glue. + The soc-glue is used for changing mode of S/PDIF signal pin + to Output from Hi-Z. This property is optional if you use + I2S signal pins only. + +Example: + audio { + compatible = "socionext,uniphier-ld20-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + + socionext,syscon = <&sg>; + }; |