summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/sound')
-rw-r--r--dts/Bindings/sound/adi,axi-i2s.txt7
-rw-r--r--dts/Bindings/sound/amlogic,axg-fifo.txt4
-rw-r--r--dts/Bindings/sound/amlogic,axg-pdm.txt3
-rw-r--r--dts/Bindings/sound/amlogic,axg-spdifin.txt3
-rw-r--r--dts/Bindings/sound/amlogic,axg-spdifout.txt3
-rw-r--r--dts/Bindings/sound/amlogic,axg-tdm-formatters.txt4
-rw-r--r--dts/Bindings/sound/cirrus,lochnagar.txt39
-rw-r--r--dts/Bindings/sound/cs42l51.txt16
-rw-r--r--dts/Bindings/sound/da7219.txt8
-rw-r--r--dts/Bindings/sound/fsl,audmix.txt50
-rw-r--r--dts/Bindings/sound/mchp-i2s-mcc.txt43
-rw-r--r--dts/Bindings/sound/mt8183-da7219-max98357.txt15
-rw-r--r--dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt15
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt8
-rw-r--r--dts/Bindings/sound/rockchip,pdm.txt5
-rw-r--r--dts/Bindings/sound/rt5651.txt5
-rw-r--r--dts/Bindings/sound/simple-amplifier.txt2
-rw-r--r--dts/Bindings/sound/simple-card.txt2
-rw-r--r--dts/Bindings/sound/sprd-mcdt.txt19
19 files changed, 238 insertions, 13 deletions
diff --git a/dts/Bindings/sound/adi,axi-i2s.txt b/dts/Bindings/sound/adi,axi-i2s.txt
index 4248b662de..229ad1392c 100644
--- a/dts/Bindings/sound/adi,axi-i2s.txt
+++ b/dts/Bindings/sound/adi,axi-i2s.txt
@@ -1,5 +1,8 @@
ADI AXI-I2S controller
+The core can be generated with transmit (playback), only receive
+(capture) or both directions enabled.
+
Required properties:
- compatible : Must be "adi,axi-i2s-1.00.a"
- reg : Must contain I2S core's registers location and length
@@ -9,8 +12,8 @@ Required properties:
- clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
rate reference clock.
- dmas: Pairs of phandle and specifier for the DMA channels that are used by
- the core. The core expects two dma channels, one for transmit and one for
- receive.
+ the core. The core expects two dma channels if both transmit and receive are
+ enabled, one channel otherwise.
- dma-names : "tx" for the transmit channel, "rx" for the receive channel.
For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
diff --git a/dts/Bindings/sound/amlogic,axg-fifo.txt b/dts/Bindings/sound/amlogic,axg-fifo.txt
index 3dfc2515e5..4330fc9dca 100644
--- a/dts/Bindings/sound/amlogic,axg-fifo.txt
+++ b/dts/Bindings/sound/amlogic,axg-fifo.txt
@@ -2,7 +2,9 @@
Required properties:
- compatible: 'amlogic,axg-toddr' or
- 'amlogic,axg-frddr'
+ 'amlogic,axg-toddr' or
+ 'amlogic,g12a-frddr' or
+ 'amlogic,g12a-toddr'
- reg: physical base address of the controller and length of memory
mapped region.
- interrupts: interrupt specifier for the fifo.
diff --git a/dts/Bindings/sound/amlogic,axg-pdm.txt b/dts/Bindings/sound/amlogic,axg-pdm.txt
index 5672d0bc5b..73f473a936 100644
--- a/dts/Bindings/sound/amlogic,axg-pdm.txt
+++ b/dts/Bindings/sound/amlogic,axg-pdm.txt
@@ -1,7 +1,8 @@
* Amlogic Audio PDM input
Required properties:
-- compatible: 'amlogic,axg-pdm'
+- compatible: 'amlogic,axg-pdm' or
+ 'amlogic,g12a-pdm'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: list of clock phandle, one for each entry clock-names.
diff --git a/dts/Bindings/sound/amlogic,axg-spdifin.txt b/dts/Bindings/sound/amlogic,axg-spdifin.txt
index 2e6cb7d9b2..0b82504fa4 100644
--- a/dts/Bindings/sound/amlogic,axg-spdifin.txt
+++ b/dts/Bindings/sound/amlogic,axg-spdifin.txt
@@ -1,7 +1,8 @@
* Amlogic Audio SPDIF Input
Required properties:
-- compatible: 'amlogic,axg-spdifin'
+- compatible: 'amlogic,axg-spdifin' or
+ 'amlogic,g12a-spdifin'
- interrupts: interrupt specifier for the spdif input.
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
diff --git a/dts/Bindings/sound/amlogic,axg-spdifout.txt b/dts/Bindings/sound/amlogic,axg-spdifout.txt
index 521c38ad89..8261527305 100644
--- a/dts/Bindings/sound/amlogic,axg-spdifout.txt
+++ b/dts/Bindings/sound/amlogic,axg-spdifout.txt
@@ -1,7 +1,8 @@
* Amlogic Audio SPDIF Output
Required properties:
-- compatible: 'amlogic,axg-spdifout'
+- compatible: 'amlogic,axg-spdifout' or
+ 'amlogic,g12a-spdifout'
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "pclk" : peripheral clock.
diff --git a/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt b/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt
index 1c1b749055..3b94a715a0 100644
--- a/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt
+++ b/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt
@@ -2,7 +2,9 @@
Required properties:
- compatible: 'amlogic,axg-tdmin' or
- 'amlogic,axg-tdmout'
+ 'amlogic,axg-tdmout' or
+ 'amlogic,g12a-tdmin' or
+ 'amlogic,g12a-tdmout'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: list of clock phandle, one for each entry clock-names.
diff --git a/dts/Bindings/sound/cirrus,lochnagar.txt b/dts/Bindings/sound/cirrus,lochnagar.txt
new file mode 100644
index 0000000000..41ae2699f0
--- /dev/null
+++ b/dts/Bindings/sound/cirrus,lochnagar.txt
@@ -0,0 +1,39 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform. Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the audio portion
+of the driver.
+
+This binding must be part of the Lochnagar MFD binding:
+ [4] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+ - compatible : One of the following strings:
+ "cirrus,lochnagar2-soundcard"
+
+ - #sound-dai-cells : Must be set to 1.
+
+ - clocks : Contains an entry for each entry in clock-names.
+ - clock-names : Must include the following clocks:
+ "mclk" Master clock source for the sound card, should normally
+ be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
+ clock driver.
+
+Example:
+
+lochnagar-sc {
+ compatible = "cirrus,lochnagar2-soundcard";
+
+ #sound-dai-cells = <1>;
+
+ clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
+ clock-names = "mclk";
+};
diff --git a/dts/Bindings/sound/cs42l51.txt b/dts/Bindings/sound/cs42l51.txt
index 4b5de33ce3..acbd68ddd2 100644
--- a/dts/Bindings/sound/cs42l51.txt
+++ b/dts/Bindings/sound/cs42l51.txt
@@ -1,6 +1,17 @@
CS42L51 audio CODEC
+Required properties:
+
+ - compatible : "cirrus,cs42l51"
+
+ - reg : the I2C address of the device for I2C.
+
Optional properties:
+ - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
+ as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ - reset-gpios : GPIO specification for the reset pin. If specified, it will be
+ deasserted before starting the communication with the codec.
- clocks : a list of phandles + clock-specifiers, one for each entry in
clock-names
@@ -14,4 +25,9 @@ cs42l51: cs42l51@4a {
reg = <0x4a>;
clocks = <&mclk_prov>;
clock-names = "MCLK";
+ VL-supply = <&reg_audio>;
+ VD-supply = <&reg_audio>;
+ VA-supply = <&reg_audio>;
+ VAHP-supply = <&reg_audio>;
+ reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
};
diff --git a/dts/Bindings/sound/da7219.txt b/dts/Bindings/sound/da7219.txt
index e9d0baeb94..add1caf26a 100644
--- a/dts/Bindings/sound/da7219.txt
+++ b/dts/Bindings/sound/da7219.txt
@@ -23,8 +23,8 @@ Optional properties:
interrupt is to be used to wake system, otherwise "irq" should be used.
- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-- #clock-cells : Should be set to '<0>', only one clock source provided;
-- clock-output-names : Name given for DAI clocks output;
+- #clock-cells : Should be set to '<1>', two clock sources provided;
+- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
- clocks : phandle and clock specifier for codec MCLK.
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
@@ -84,8 +84,8 @@ Example:
VDDMIC-supply = <&reg_audio>;
VDDIO-supply = <&reg_audio>;
- #clock-cells = <0>;
- clock-output-names = "dai-clks";
+ #clock-cells = <1>;
+ clock-output-names = "dai-wclk", "dai-bclk";
clocks = <&clks 201>;
clock-names = "mclk";
diff --git a/dts/Bindings/sound/fsl,audmix.txt b/dts/Bindings/sound/fsl,audmix.txt
new file mode 100644
index 0000000000..840b7e0d6a
--- /dev/null
+++ b/dts/Bindings/sound/fsl,audmix.txt
@@ -0,0 +1,50 @@
+NXP Audio Mixer (AUDMIX).
+
+The Audio Mixer is a on-chip functional module that allows mixing of two
+audio streams into a single audio stream. Audio Mixer has two input serial
+audio interfaces. These are driven by two Synchronous Audio interface
+modules (SAI). Each input serial interface carries 8 audio channels in its
+frame in TDM manner. Mixer mixes audio samples of corresponding channels
+from two interfaces into a single sample. Before mixing, audio samples of
+two inputs can be attenuated based on configuration. The output of the
+Audio Mixer is also a serial audio interface. Like input interfaces it has
+the same TDM frame format. This output is used to drive the serial DAC TDM
+interface of audio codec and also sent to the external pins along with the
+receive path of normal audio SAI module for readback by the CPU.
+
+The output of Audio Mixer can be selected from any of the three streams
+ - serial audio input 1
+ - serial audio input 2
+ - mixed audio
+
+Mixing operation is independent of audio sample rate but the two audio
+input streams must have same audio sample rate with same number of channels
+in TDM frame to be eligible for mixing.
+
+Device driver required properties:
+=================================
+ - compatible : Compatible list, contains "fsl,imx8qm-audmix"
+
+ - reg : Offset and length of the register set for the device.
+
+ - clocks : Must contain an entry for each entry in clock-names.
+
+ - clock-names : Must include the "ipg" for register access.
+
+ - power-domains : Must contain the phandle to AUDMIX power domain node
+
+ - dais : Must contain a list of phandles to AUDMIX connected
+ DAIs. The current implementation requires two phandles
+ to SAI interfaces to be provided, the first SAI in the
+ list being used to route the AUDMIX output.
+
+Device driver configuration example:
+======================================
+ audmix: audmix@59840000 {
+ compatible = "fsl,imx8qm-audmix";
+ reg = <0x0 0x59840000 0x0 0x10000>;
+ clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
+ clock-names = "ipg";
+ power-domains = <&pd_audmix>;
+ dais = <&sai4>, <&sai5>;
+ };
diff --git a/dts/Bindings/sound/mchp-i2s-mcc.txt b/dts/Bindings/sound/mchp-i2s-mcc.txt
new file mode 100644
index 0000000000..91ec83a6fa
--- /dev/null
+++ b/dts/Bindings/sound/mchp-i2s-mcc.txt
@@ -0,0 +1,43 @@
+* Microchip I2S Multi-Channel Controller
+
+Required properties:
+- compatible: Should be "microchip,sam9x60-i2smcc".
+- reg: Should be the physical base address of the controller and the
+ length of memory mapped region.
+- interrupts: Should contain the interrupt for the controller.
+- dmas: Should be one per channel name listed in the dma-names property,
+ as described in atmel-dma.txt and dma.txt files.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+ Two dmas have to be defined, "tx" and "rx".
+- clocks: Must contain an entry for each entry in clock-names.
+ Please refer to clock-bindings.txt.
+- clock-names: Should be one of each entry matching the clocks phandles list:
+ - "pclk" (peripheral clock) Required.
+ - "gclk" (generated clock) Optional (1).
+
+Optional properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- princtrl-names: Should contain only one value - "default".
+
+
+(1) : Only the peripheral clock is required. The generated clock is optional
+ and should be set mostly when Master Mode is required.
+
+Example:
+
+ i2s@f001c000 {
+ compatible = "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s_clk>, <&i2s_gclk>;
+ clock-names = "pclk", "gclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_default>;
+ };
diff --git a/dts/Bindings/sound/mt8183-da7219-max98357.txt b/dts/Bindings/sound/mt8183-da7219-max98357.txt
new file mode 100644
index 0000000000..92ac86f838
--- /dev/null
+++ b/dts/Bindings/sound/mt8183-da7219-max98357.txt
@@ -0,0 +1,15 @@
+MT8183 with MT6358, DA7219 and MAX98357 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_da7219_max98357"
+- mediatek,headset-codec: the phandles of da7219 codecs
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Example:
+
+ sound {
+ compatible = "mediatek,mt8183_da7219_max98357";
+ mediatek,headset-codec = <&da7219>;
+ mediatek,platform = <&afe>;
+ };
+
diff --git a/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
new file mode 100644
index 0000000000..d6d5207fa9
--- /dev/null
+++ b/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -0,0 +1,15 @@
+MT8183 with MT6358, TS3A227 and MAX98357 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Example:
+
+ sound {
+ compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+ mediatek,headset-codec = <&ts3a227>;
+ mediatek,platform = <&afe>;
+ };
+
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index 648d43e1b1..5c52182f7d 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -266,6 +266,7 @@ Required properties:
- "renesas,rcar_sound-r8a7743" (RZ/G1M)
- "renesas,rcar_sound-r8a7744" (RZ/G1N)
- "renesas,rcar_sound-r8a7745" (RZ/G1E)
+ - "renesas,rcar_sound-r8a77470" (RZ/G1C)
- "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- "renesas,rcar_sound-r8a774c0" (RZ/G2E)
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
@@ -282,7 +283,12 @@ Required properties:
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1
- SRU/ADG/SSIU/SSI if generation2
+ SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
+ Select extended AUDIO-DMAC-periperi address if SoC has it,
+ otherwise select normal AUDIO-DMAC-periperi address.
+- reg-names : Should contain the register names.
+ scu/adg/ssi if generation1
+ scu/adg/ssiu/ssi/audmapp if generation2/generation3
- rcar_sound,ssi : Should contain SSI feature.
The number of SSI subnode should be same as HW.
see below for detail.
diff --git a/dts/Bindings/sound/rockchip,pdm.txt b/dts/Bindings/sound/rockchip,pdm.txt
index 47f164fbd1..98572a2512 100644
--- a/dts/Bindings/sound/rockchip,pdm.txt
+++ b/dts/Bindings/sound/rockchip,pdm.txt
@@ -3,6 +3,9 @@
Required properties:
- compatible: "rockchip,pdm"
+ - "rockchip,px30-pdm"
+ - "rockchip,rk1808-pdm"
+ - "rockchip,rk3308-pdm"
- reg: physical base address of the controller and length of memory mapped
region.
- dmas: DMA specifiers for rx dma. See the DMA client binding,
@@ -12,6 +15,8 @@ Required properties:
- clock-names: should contain following:
- "pdm_hclk": clock for PDM BUS
- "pdm_clk" : clock for PDM controller
+- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
+- reset-names: reset names, should include "pdm-m".
- pinctrl-names: Must contain a "default" entry.
- pinctrl-N: One property must exist for each entry in
pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
diff --git a/dts/Bindings/sound/rt5651.txt b/dts/Bindings/sound/rt5651.txt
index a41199a5cd..56e736a1cb 100644
--- a/dts/Bindings/sound/rt5651.txt
+++ b/dts/Bindings/sound/rt5651.txt
@@ -22,6 +22,11 @@ Optional properties:
2: Use JD1_2 pin for jack-detect
3: Use JD2 pin for jack-detect
+- realtek,jack-detect-not-inverted
+ bool. Normal jack-detect switches give an inverted (active-low) signal,
+ set this bool in the rare case you've a jack-detect switch which is not
+ inverted.
+
- realtek,over-current-threshold-microamp
u32, micbias over-current detection threshold in µA, valid values are
600, 1500 and 2000µA.
diff --git a/dts/Bindings/sound/simple-amplifier.txt b/dts/Bindings/sound/simple-amplifier.txt
index 7182ac4f1e..b1b097cc9b 100644
--- a/dts/Bindings/sound/simple-amplifier.txt
+++ b/dts/Bindings/sound/simple-amplifier.txt
@@ -2,9 +2,9 @@ Simple Amplifier Audio Driver
Required properties:
- compatible : "dioo,dio2125" or "simple-audio-amplifier"
-- enable-gpios : the gpio connected to the enable pin of the simple amplifier
Optional properties:
+- enable-gpios : the gpio connected to the enable pin of the simple amplifier
- VCC-supply : power supply for the device, as covered
in Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/dts/Bindings/sound/simple-card.txt b/dts/Bindings/sound/simple-card.txt
index 4629c8f8a6..79954cd6e3 100644
--- a/dts/Bindings/sound/simple-card.txt
+++ b/dts/Bindings/sound/simple-card.txt
@@ -24,6 +24,8 @@ Optional properties:
a microphone is attached.
- simple-audio-card,aux-devs : List of phandles pointing to auxiliary devices, such
as amplifiers, to be added to the sound card.
+- simple-audio-card,pin-switches : List of strings containing the widget names for
+ which pin switches must be created.
Optional subnodes:
diff --git a/dts/Bindings/sound/sprd-mcdt.txt b/dts/Bindings/sound/sprd-mcdt.txt
new file mode 100644
index 0000000000..274ba0acbf
--- /dev/null
+++ b/dts/Bindings/sound/sprd-mcdt.txt
@@ -0,0 +1,19 @@
+Spreadtrum Multi-Channel Data Transfer Binding
+
+The Multi-channel data transfer controller is used for sound stream
+transmission between audio subsystem and other AP/CP subsystem. It
+supports 10 DAC channel and 10 ADC channel, and each channel can be
+configured with DMA mode or interrupt mode.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-mcdt".
+- reg: Should contain registers address and length.
+- interrupts: Should contain one interrupt shared by all channel.
+
+Example:
+
+mcdt@41490000 {
+ compatible = "sprd,sc9860-mcdt";
+ reg = <0 0x41490000 0 0x170>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-24 08:19:14 +0000