summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/sound')
-rw-r--r--dts/Bindings/sound/adi,adau17x1.txt24
-rw-r--r--dts/Bindings/sound/cs4271.txt7
-rw-r--r--dts/Bindings/sound/fsl-asoc-card.txt9
-rw-r--r--dts/Bindings/sound/max9867.txt17
-rw-r--r--dts/Bindings/sound/max98926.txt32
-rw-r--r--dts/Bindings/sound/mt8173-rt5650-rt5514.txt15
-rw-r--r--dts/Bindings/sound/mt8173-rt5650.txt15
-rw-r--r--dts/Bindings/sound/pcm179x.txt11
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt340
-rw-r--r--dts/Bindings/sound/renesas,rsrc-card.txt1
-rw-r--r--dts/Bindings/sound/rockchip-i2s.txt1
-rw-r--r--dts/Bindings/sound/rockchip-spdif.txt8
-rw-r--r--dts/Bindings/sound/rt5514.txt25
-rw-r--r--dts/Bindings/sound/rt5616.txt6
-rw-r--r--dts/Bindings/sound/rt5640.txt3
-rw-r--r--dts/Bindings/sound/sunxi,sun4i-spdif.txt39
-rw-r--r--dts/Bindings/sound/ti,ads117x.txt11
17 files changed, 561 insertions, 3 deletions
diff --git a/dts/Bindings/sound/adi,adau17x1.txt b/dts/Bindings/sound/adi,adau17x1.txt
new file mode 100644
index 0000000000..8dbce0e18d
--- /dev/null
+++ b/dts/Bindings/sound/adi,adau17x1.txt
@@ -0,0 +1,24 @@
+Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781
+
+Required properties:
+
+ - compatible: Should contain one of the following:
+ "adi,adau1361"
+ "adi,adau1461"
+ "adi,adau1761"
+ "adi,adau1961"
+ "adi,adau1381"
+ "adi,adau1781"
+
+ - reg: The i2c address. Value depends on the state of ADDR0
+ and ADDR1, as wired in hardware.
+
+Examples:
+#include <dt-bindings/sound/adau17x1.h>
+
+ i2c_bus {
+ adau1361@38 {
+ compatible = "adi,adau1761";
+ reg = <0x38>;
+ };
+ };
diff --git a/dts/Bindings/sound/cs4271.txt b/dts/Bindings/sound/cs4271.txt
index e2cd1d7539..6e699ceaba 100644
--- a/dts/Bindings/sound/cs4271.txt
+++ b/dts/Bindings/sound/cs4271.txt
@@ -33,12 +33,19 @@ Optional properties:
Note that this is not needed in case the clocks are stable
throughout the entire runtime of the codec.
+ - vd-supply: Digital power
+ - vl-supply: Logic power
+ - va-supply: Analog Power
+
Examples:
codec_i2c: cs4271@10 {
compatible = "cirrus,cs4271";
reg = <0x10>;
reset-gpio = <&gpio 23 0>;
+ vd-supply = <&vdd_3v3_reg>;
+ vl-supply = <&vdd_3v3_reg>;
+ va-supply = <&vdd_3v3_reg>;
};
codec_spi: cs4271@0 {
diff --git a/dts/Bindings/sound/fsl-asoc-card.txt b/dts/Bindings/sound/fsl-asoc-card.txt
index 4da41bf188..ceaef51269 100644
--- a/dts/Bindings/sound/fsl-asoc-card.txt
+++ b/dts/Bindings/sound/fsl-asoc-card.txt
@@ -24,6 +24,9 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-cs42888"
+ "fsl,imx-audio-cs427x"
+ (compatible with CS4271 and CS4272)
+
"fsl,imx-audio-wm8962"
(compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt)
@@ -63,6 +66,12 @@ Optional properties:
- audio-asrc : The phandle of ASRC. It can be absent if there's no
need to add ASRC support via DPCM.
+Optional unless SSI is selected as a CPU DAI:
+
+ - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
+
+ - mux-ext-port : The external port of the i.MX audio muxer
+
Example:
sound-cs42888 {
compatible = "fsl,imx-audio-cs42888";
diff --git a/dts/Bindings/sound/max9867.txt b/dts/Bindings/sound/max9867.txt
new file mode 100644
index 0000000000..394cd4eb17
--- /dev/null
+++ b/dts/Bindings/sound/max9867.txt
@@ -0,0 +1,17 @@
+max9867 codec
+
+This device supports I2C mode only.
+
+Required properties:
+
+- compatible : "maxim,max9867"
+- reg : The chip select number on the I2C bus
+
+Example:
+
+&i2c {
+ max9867: max9867@0x18 {
+ compatible = "maxim,max9867";
+ reg = <0x18>;
+ };
+};
diff --git a/dts/Bindings/sound/max98926.txt b/dts/Bindings/sound/max98926.txt
new file mode 100644
index 0000000000..0b7f4e4d5f
--- /dev/null
+++ b/dts/Bindings/sound/max98926.txt
@@ -0,0 +1,32 @@
+max98926 audio CODEC
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : "maxim,max98926"
+
+ - vmon-slot-no : slot number used to send voltage information
+ or in inteleave mode this will be used as
+ interleave slot.
+
+ - imon-slot-no : slot number used to send current information
+
+ - interleave-mode : When using two MAX98926 in a system it is
+ possible to create ADC data that that will
+ overflow the frame size. Digital Audio Interleave
+ mode provides a means to output VMON and IMON data
+ from two devices on a single DOUT line when running
+ smaller frames sizes such as 32 BCLKS per LRCLK or
+ 48 BCLKS per LRCLK.
+
+ - reg : the I2C address of the device for I2C
+
+Example:
+
+codec: max98926@1a {
+ compatible = "maxim,max98926";
+ vmon-slot-no = <0>;
+ imon-slot-no = <2>;
+ reg = <0x1a>;
+};
diff --git a/dts/Bindings/sound/mt8173-rt5650-rt5514.txt b/dts/Bindings/sound/mt8173-rt5650-rt5514.txt
new file mode 100644
index 0000000000..e8b3c80c6f
--- /dev/null
+++ b/dts/Bindings/sound/mt8173-rt5650-rt5514.txt
@@ -0,0 +1,15 @@
+MT8173 with RT5650 RT5514 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650-rt5514"
+- mediatek,audio-codec: the phandles of rt5650 and rt5514 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Example:
+
+ sound {
+ compatible = "mediatek,mt8173-rt5650-rt5514";
+ mediatek,audio-codec = <&rt5650 &rt5514>;
+ mediatek,platform = <&afe>;
+ };
+
diff --git a/dts/Bindings/sound/mt8173-rt5650.txt b/dts/Bindings/sound/mt8173-rt5650.txt
new file mode 100644
index 0000000000..fe5a5ef171
--- /dev/null
+++ b/dts/Bindings/sound/mt8173-rt5650.txt
@@ -0,0 +1,15 @@
+MT8173 with RT5650 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650"
+- mediatek,audio-codec: the phandles of rt5650 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Example:
+
+ sound {
+ compatible = "mediatek,mt8173-rt5650";
+ mediatek,audio-codec = <&rt5650>;
+ mediatek,platform = <&afe>;
+ };
+
diff --git a/dts/Bindings/sound/pcm179x.txt b/dts/Bindings/sound/pcm179x.txt
index 4ae70d3462..436c2b2476 100644
--- a/dts/Bindings/sound/pcm179x.txt
+++ b/dts/Bindings/sound/pcm179x.txt
@@ -1,6 +1,6 @@
Texas Instruments pcm179x DT bindings
-This driver supports the SPI bus.
+This driver supports both the I2C and SPI bus.
Required properties:
@@ -9,6 +9,11 @@ Required properties:
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
+Required properties on I2C:
+
+ - reg: the I2C address
+
+
Examples:
codec_spi: 1792a@0 {
@@ -16,3 +21,7 @@ Examples:
spi-max-frequency = <600000>;
};
+ codec_i2c: 1792a@4c {
+ compatible = "ti,pcm1792a";
+ reg = <0x4c>;
+ };
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index 8ee0fa91e4..c7b29df4a9 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -1,6 +1,337 @@
Renesas R-Car sound
+=============================================
+* Modules
+=============================================
+
+Renesas R-Car sound is constructed from below modules
+(for Gen2 or later)
+
+ SCU : Sampling Rate Converter Unit
+ - SRC : Sampling Rate Converter
+ - CMD
+ - CTU : Channel Transfer Unit
+ - MIX : Mixer
+ - DVC : Digital Volume and Mute Function
+ SSIU : Serial Sound Interface Unit
+ SSI : Serial Sound Interface
+
+See detail of each module's channels, connection, limitation on datasheet
+
+=============================================
+* Multi channel
+=============================================
+
+Multi channel is supported by Multi-SSI, or TDM-SSI.
+
+ Multi-SSI : 6ch case, you can use stereo x 3 SSI
+ TDM-SSI : 6ch case, you can use TDM
+
+=============================================
+* Enable/Disable each modules
+=============================================
+
+See datasheet to check SRC/CTU/MIX/DVC connect-limitation.
+DT controls enabling/disabling module.
+${LINUX}/arch/arm/boot/dts/r8a7790-lager.dts can be good example.
+This is example of
+
+Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
+Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
+
+ &rcar_sound {
+ ...
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
+ };
+ };
+ };
+
+You can use below.
+${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
+
+ &src0 &ctu00 &mix0 &dvc0 &ssi0
+ &src1 &ctu01 &mix1 &dvc1 &ssi1
+ &src2 &ctu02 &ssi2
+ &src3 &ctu03 &ssi3
+ &src4 &ssi4
+ &src5 &ctu10 &ssi5
+ &src6 &ctu11 &ssi6
+ &src7 &ctu12 &ssi7
+ &src8 &ctu13 &ssi8
+ &src9 &ssi9
+
+=============================================
+* SRC (Sampling Rate Converter)
+=============================================
+
+ [xx]Hz [yy]Hz
+ ------> [SRC] ------>
+
+SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
+
+ Asynchronous mode: input data / output data are based on different clocks.
+ you can use this mode on Playback / Capture
+ Synchronous mode: input data / output data are based on same clocks.
+ This mode will be used if system doesn't have its input clock,
+ for example digital TV case.
+ you can use this mode on Playback
+
+------------------
+** Asynchronous mode
+------------------
+
+You need to use "renesas,rsrc-card" sound card for it.
+example)
+
+ sound {
+ compatible = "renesas,rsrc-card";
+ ...
+ /*
+ * SRC Asynchronous mode setting
+ * Playback:
+ * All input data will be converted to 48kHz
+ * Capture:
+ * Inputed 48kHz data will be converted to
+ * system specified Hz
+ */
+ convert-rate = <48000>;
+ ...
+ cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ codec {
+ ...
+ };
+ };
+
+------------------
+** Synchronous mode
+------------------
+
+ > amixer set "SRC Out Rate" on
+ > aplay xxxx.wav
+ > amixer set "SRC Out Rate" 48000
+ > amixer set "SRC Out Rate" 44100
+
+=============================================
+* CTU (Channel Transfer Unit)
+=============================================
+
+ [xx]ch [yy]ch
+ ------> [CTU] -------->
+
+CTU can convert [xx]ch to [yy]ch, or exchange outputed channel.
+CTU conversion needs matrix settings.
+For more detail information, see below
+
+ Renesas R-Car datasheet
+ - Sampling Rate Converter Unit (SCU)
+ - SCU Operation
+ - CMD Block
+ - Functional Blocks in CMD
+
+ Renesas R-Car datasheet
+ - Sampling Rate Converter Unit (SCU)
+ - Register Description
+ - CTUn Scale Value exx Register (CTUn_SVxxR)
+
+ ${LINUX}/sound/soc/sh/rcar/ctu.c
+ - comment of header
+
+You need to use "renesas,rsrc-card" sound card for it.
+example)
+
+ sound {
+ compatible = "renesas,rsrc-card";
+ ...
+ /*
+ * CTU setting
+ * All input data will be converted to 2ch
+ * as output data
+ */
+ convert-channels = <2>;
+ ...
+ cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ codec {
+ ...
+ };
+ };
+
+Ex) Exchange output channel
+ Input -> Output
+ 1ch -> 0ch
+ 0ch -> 1ch
+
+ example of using matrix
+ output 0ch = (input 0ch x 0) + (input 1ch x 1)
+ output 1ch = (input 0ch x 1) + (input 1ch x 0)
+
+ amixer set "CTU Reset" on
+ amixer set "CTU Pass" 9,10
+ amixer set "CTU SV0" 0,4194304
+ amixer set "CTU SV1" 4194304,0
+
+ example of changing connection
+ amixer set "CTU Reset" on
+ amixer set "CTU Pass" 2,1
+
+=============================================
+* MIX (Mixer)
+=============================================
+
+MIX merges 2 sounds path. You can see 2 sound interface on system,
+and these sounds will be merged by MIX.
+
+ aplay -D plughw:0,0 xxxx.wav &
+ aplay -D plughw:0,1 yyyy.wav
+
+You need to use "renesas,rsrc-card" sound card for it.
+Ex)
+ [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
+ |
+ [MEM] -> [SRC2] -> [CTU03] -+
+
+ sound {
+ compatible = "renesas,rsrc-card";
+ ...
+ cpu@0 {
+ sound-dai = <&rcar_sound 0>;
+ };
+ cpu@1 {
+ sound-dai = <&rcar_sound 1>;
+ };
+ codec {
+ ...
+ };
+ };
+
+ &rcar_sound {
+ ...
+ rcar_sound,dai {
+ dai0 {
+ playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+ };
+ dai1 {
+ playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+ };
+ };
+ };
+
+=============================================
+* DVC (Digital Volume and Mute Function)
+=============================================
+
+DVC controls Playback/Capture volume.
+
+Playback Volume
+ amixer set "DVC Out" 100%
+
+Capture Volume
+ amixer set "DVC In" 100%
+
+Playback Mute
+ amixer set "DVC Out Mute" on
+
+Capture Mute
+ amixer set "DVC In Mute" on
+
+Volume Ramp
+ amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ amixer set "DVC Out Ramp" on
+ aplay xxx.wav &
+ amixer set "DVC Out" 80% // Volume Down
+ amixer set "DVC Out" 100% // Volume Up
+
+=============================================
+* SSIU (Serial Sound Interface Unit)
+=============================================
+
+There is no DT settings for SSIU, because SSIU will be automatically
+selected via SSI.
+SSIU can avoid some under/over run error, because it has some buffer.
+But you can't use it if SSI was PIO mode.
+In DMA mode, you can select not to use SSIU by using "no-busif" on DT.
+
+ &ssi0 {
+ no-busif;
+ };
+
+=============================================
+* SSI (Serial Sound Interface)
+=============================================
+
+** PIO mode
+
+You can use PIO mode which is for connection check by using.
+Note: The system will drop non-SSI modules in PIO mode
+even though if DT is selecting other modules.
+
+ &ssi0 {
+ pio-transfer
+ };
+
+** DMA mode without SSIU
+
+You can use DMA without SSIU.
+Note: under/over run, or noise are likely to occur
+
+ &ssi0 {
+ no-busif;
+ };
+
+** PIN sharing
+
+Each SSI can share WS pin. It is based on platform.
+This is example if SSI1 want to share WS pin with SSI0
+
+ &ssi1 {
+ shared-pin;
+ };
+
+** Multi-SSI
+
+You can use Multi-SSI.
+This is example of SSI0/SSI1/SSI2 (= for 6ch)
+
+ &rcar_sound {
+ ...
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
+ };
+ };
+ };
+
+** TDM-SSI
+
+You can use TDM with SSI.
+This is example of TDM 6ch.
+Driver can automatically switches TDM <-> stereo mode in this case.
+
+ rsnd_tdm: sound {
+ compatible = "simple-audio-card";
+ ...
+ simple-audio-card,cpu {
+ /* system can use TDM 6ch */
+ dai-tdm-slot-num = <6>;
+ sound-dai = <&rcar_sound>;
+ };
+ simple-audio-card,codec {
+ ...
+ };
+ };
+
+
+=============================================
Required properties:
+=============================================
+
- compatible : "renesas,rcar_sound-<soctype>", fallbacks
"renesas,rcar_sound-gen1" if generation1, and
"renesas,rcar_sound-gen2" if generation2
@@ -64,7 +395,10 @@ DAI subnode properties:
- playback : list of playback modules
- capture : list of capture modules
+
+=============================================
Example:
+=============================================
rcar_sound: sound@ec500000 {
#sound-dai-cells = <1>;
@@ -250,7 +584,9 @@ rcar_sound: sound@ec500000 {
};
};
+=============================================
Example: simple sound card
+=============================================
rsnd_ak4643: sound {
compatible = "simple-audio-card";
@@ -290,7 +626,9 @@ Example: simple sound card
shared-pin;
};
+=============================================
Example: simple sound card for TDM
+=============================================
rsnd_tdm: sound {
compatible = "simple-audio-card";
@@ -309,7 +647,9 @@ Example: simple sound card for TDM
};
};
+=============================================
Example: simple sound card for Multi channel
+=============================================
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
diff --git a/dts/Bindings/sound/renesas,rsrc-card.txt b/dts/Bindings/sound/renesas,rsrc-card.txt
index 2b2caa281c..255ece3043 100644
--- a/dts/Bindings/sound/renesas,rsrc-card.txt
+++ b/dts/Bindings/sound/renesas,rsrc-card.txt
@@ -30,6 +30,7 @@ Optional subnode properties:
- frame-inversion : bool property. Add this if the
dai-link uses frame clock inversion.
- convert-rate : platform specified sampling rate convert
+- convert-channels : platform specified converted channel size (2 - 8 ch)
- audio-prefix : see audio-routing
- audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/dts/Bindings/sound/rockchip-i2s.txt b/dts/Bindings/sound/rockchip-i2s.txt
index b7f3a9325e..6e86d8aa29 100644
--- a/dts/Bindings/sound/rockchip-i2s.txt
+++ b/dts/Bindings/sound/rockchip-i2s.txt
@@ -9,6 +9,7 @@ Required properties:
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+ - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
diff --git a/dts/Bindings/sound/rockchip-spdif.txt b/dts/Bindings/sound/rockchip-spdif.txt
index e64dbdea7d..11046429a1 100644
--- a/dts/Bindings/sound/rockchip-spdif.txt
+++ b/dts/Bindings/sound/rockchip-spdif.txt
@@ -7,8 +7,12 @@ a fibre cable.
Required properties:
- compatible: should be one of the following:
- - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or
- "rockchip,rk3066-spdif"
+ - "rockchip,rk3066-spdif"
+ - "rockchip,rk3188-spdif"
+ - "rockchip,rk3288-spdif"
+ - "rockchip,rk3366-spdif"
+ - "rockchip,rk3368-spdif"
+ - "rockchip,rk3399-spdif"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the SPDIF interrupt.
diff --git a/dts/Bindings/sound/rt5514.txt b/dts/Bindings/sound/rt5514.txt
new file mode 100644
index 0000000000..e24436fc5e
--- /dev/null
+++ b/dts/Bindings/sound/rt5514.txt
@@ -0,0 +1,25 @@
+RT5514 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5514".
+
+- reg : The I2C address of the device.
+
+Pins on the device (for linking into audio routes) for RT5514:
+
+ * DMIC1L
+ * DMIC1R
+ * DMIC2L
+ * DMIC2R
+ * AMICL
+ * AMICR
+
+Example:
+
+codec: rt5514@57 {
+ compatible = "realtek,rt5514";
+ reg = <0x57>;
+};
diff --git a/dts/Bindings/sound/rt5616.txt b/dts/Bindings/sound/rt5616.txt
index efc48c6519..e410858185 100644
--- a/dts/Bindings/sound/rt5616.txt
+++ b/dts/Bindings/sound/rt5616.txt
@@ -8,6 +8,12 @@ Required properties:
- reg : The I2C address of the device.
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC.
+
+- clock-names: Should be "mclk".
+
Pins on the device (for linking into audio routes) for RT5616:
* IN1P
diff --git a/dts/Bindings/sound/rt5640.txt b/dts/Bindings/sound/rt5640.txt
index 9e62f6eb34..57fe646430 100644
--- a/dts/Bindings/sound/rt5640.txt
+++ b/dts/Bindings/sound/rt5640.txt
@@ -12,6 +12,9 @@ Required properties:
Optional properties:
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
- realtek,in1-differential
- realtek,in2-differential
- realtek,in3-differential
diff --git a/dts/Bindings/sound/sunxi,sun4i-spdif.txt b/dts/Bindings/sound/sunxi,sun4i-spdif.txt
new file mode 100644
index 0000000000..13503aa505
--- /dev/null
+++ b/dts/Bindings/sound/sunxi,sun4i-spdif.txt
@@ -0,0 +1,39 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+For now only playback is supported.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "apb" clock for the spdif bus.
+ "spdif" clock for spdif controller.
+
+Example:
+
+spdif: spdif@01c21000 {
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ status = "okay";
+};
diff --git a/dts/Bindings/sound/ti,ads117x.txt b/dts/Bindings/sound/ti,ads117x.txt
new file mode 100644
index 0000000000..7db19b5086
--- /dev/null
+++ b/dts/Bindings/sound/ti,ads117x.txt
@@ -0,0 +1,11 @@
+Texas Intstruments ADS117x ADC
+
+Required properties:
+
+ - compatible : "ti,ads1174" or "ti,ads1178"
+
+Example:
+
+ads1178 {
+ compatible = "ti,ads1178";
+};