diff options
Diffstat (limited to 'dts/Bindings/spi/cdns,qspi-nor.yaml')
| -rw-r--r-- | dts/Bindings/spi/cdns,qspi-nor.yaml | 151 |
1 files changed, 92 insertions, 59 deletions
diff --git a/dts/Bindings/spi/cdns,qspi-nor.yaml b/dts/Bindings/spi/cdns,qspi-nor.yaml index 0e7087cc8b..cca81f89e2 100644 --- a/dts/Bindings/spi/cdns,qspi-nor.yaml +++ b/dts/Bindings/spi/cdns,qspi-nor.yaml @@ -7,19 +7,73 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence Quad SPI controller maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Vaishnav Achath <vaishnav.a@ti.com> allOf: - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: xlnx,versal-ospi-1.0 + then: + required: + - power-domains + - if: + properties: + compatible: + contains: + const: starfive,jh7110-qspi + then: + properties: + resets: + minItems: 2 + maxItems: 3 + + reset-names: + minItems: 2 + maxItems: 3 + items: + enum: [ qspi, qspi-ocp, rstc_ref ] + + else: + properties: + resets: + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + items: + enum: [ qspi, qspi-ocp ] + - if: + properties: + compatible: + contains: + const: amd,pensando-elba-qspi + then: + properties: + cdns,fifo-depth: + enum: [ 128, 256, 1024 ] + default: 1024 + else: + properties: + cdns,fifo-depth: + enum: [ 128, 256 ] + default: 128 properties: compatible: oneOf: - items: - enum: + - amd,pensando-elba-qspi - ti,k2g-qspi - ti,am654-ospi - intel,lgm-qspi + - xlnx,versal-ospi-1.0 + - intel,socfpga-qspi + - starfive,jh7110-qspi - const: cdns,qspi-nor - const: cdns,qspi-nor @@ -32,14 +86,22 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: ref + - items: + - const: ref + - const: ahb + - const: apb cdns,fifo-depth: description: Size of the data FIFO in words. - $ref: "/schemas/types.yaml#/definitions/uint32" - enum: [ 128, 256 ] - default: 128 + $ref: /schemas/types.yaml#/definitions/uint32 cdns,fifo-width: $ref: /schemas/types.yaml#/definitions/uint32 @@ -65,47 +127,18 @@ properties: data rather than the QSPI clock. Make sure that QSPI return clock is populated on the board before using this property. + power-domains: + maxItems: 1 + resets: - maxItems: 2 + minItems: 2 + maxItems: 3 reset-names: - minItems: 1 - maxItems: 2 + minItems: 2 + maxItems: 3 items: - enum: [ qspi, qspi-ocp ] - -# subnode's properties -patternProperties: - "@[0-9a-f]+$": - type: object - description: - Flash device uses the below defined properties in the subnode. - - properties: - cdns,read-delay: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Delay for read capture logic, in clock cycles. - - cdns,tshsl-ns: - description: - Delay in nanoseconds for the length that the master mode chip select - outputs are de-asserted between transactions. - - cdns,tsd2d-ns: - description: - Delay in nanoseconds between one chip select being de-activated - and the activation of another. - - cdns,tchsh-ns: - description: - Delay in nanoseconds between last bit of current transaction and - deasserting the device chip select (qspi_n_ss_out). - - cdns,tslch-ns: - description: - Delay in nanoseconds between setting qspi_n_ss_out low and - first bit transfer. + enum: [ qspi, qspi-ocp, rstc_ref ] required: - compatible @@ -123,21 +156,21 @@ unevaluatedProperties: false examples: - | qspi: spi@ff705000 { - compatible = "cdns,qspi-nor"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xff705000 0x1000>, - <0xffa00000 0x1000>; - interrupts = <0 151 4>; - clocks = <&qspi_clk>; - cdns,fifo-depth = <128>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x00000000>; - resets = <&rst 0x1>, <&rst 0x2>; - reset-names = "qspi", "qspi-ocp"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - }; + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff705000 0x1000>, + <0xffa00000 0x1000>; + interrupts = <0 151 4>; + clocks = <&qspi_clk>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + resets = <&rst 0x1>, <&rst 0x2>; + reset-names = "qspi", "qspi-ocp"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + }; }; |