summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/spi/fsl-imx-cspi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/spi/fsl-imx-cspi.txt')
-rw-r--r--dts/Bindings/spi/fsl-imx-cspi.txt56
1 files changed, 0 insertions, 56 deletions
diff --git a/dts/Bindings/spi/fsl-imx-cspi.txt b/dts/Bindings/spi/fsl-imx-cspi.txt
deleted file mode 100644
index 33bc58f4cf..0000000000
--- a/dts/Bindings/spi/fsl-imx-cspi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Freescale (Enhanced) Configurable Serial Peripheral Interface
- (CSPI/eCSPI) for i.MX
-
-Required properties:
-- compatible :
- - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
- - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
- - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
- - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
- - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
- - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
- - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
- - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ
- - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM
- - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN
- - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain CSPI/eCSPI interrupt
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Recommended properties:
-- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip
-select lines can be used, they appear to always generate a pulse between each
-word of a transfer. Most use cases will require GPIO based chip selects to
-generate a valid transaction.
-
-Optional properties:
-- num-cs : Number of total chip selects, see spi-bus.txt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names, if present, should include "tx" and "rx".
-- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
-controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
-the SPI_READY mode-flag needs to be set too.
-Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
-
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
-
-Example:
-
-ecspi@70010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-ecspi";
- reg = <0x70010000 0x4000>;
- interrupts = <36>;
- cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
- <&gpio3 25 0>; /* GPIO3_25 */
- dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
- dma-names = "rx", "tx";
- fsl,spi-rdy-drctl = <1>;
-};