summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/spi/qcom,spi-geni-qcom.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/spi/qcom,spi-geni-qcom.yaml')
-rw-r--r--dts/Bindings/spi/qcom,spi-geni-qcom.yaml118
1 files changed, 118 insertions, 0 deletions
diff --git a/dts/Bindings/spi/qcom,spi-geni-qcom.yaml b/dts/Bindings/spi/qcom,spi-geni-qcom.yaml
new file mode 100644
index 0000000000..2e20ca313e
--- /dev/null
+++ b/dts/Bindings/spi/qcom,spi-geni-qcom.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The QUP v3 core is a GENI based AHB slave that provides a common data path
+ (an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+ mini-core.
+
+ SPI in master mode supports up to 50MHz, up to four chip selects,
+ programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+ SPI Controller nodes must be child of GENI based Qualcomm Universal
+ Peripharal. Please refer GENI based QUP wrapper controller node bindings
+ described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ const: qcom,geni-spi
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: se
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interconnects:
+ minItems: 2
+ maxItems: 3
+
+ interconnect-names:
+ minItems: 2
+ items:
+ - const: qup-core
+ - const: qup-config
+ - const: qup-memory
+
+ interrupts:
+ maxItems: 1
+
+ operating-points-v2: true
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/interconnect/qcom,sc7180.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x00880000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ };
+
+ - |
+ #include <dt-bindings/dma/qcom-gpi.h>
+
+ spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x00884000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };