1 files changed, 0 insertions, 66 deletions
diff --git a/dts/Bindings/spi/spi-fsl-qspi.txt b/dts/Bindings/spi/spi-fsl-qspi.txt
deleted file mode 100644
index 69dc5d57b1..0000000000
--- a/dts/Bindings/spi/spi-fsl-qspi.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* Freescale Quad Serial Peripheral Interface(QuadSPI)
-
-Required properties:
-  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
-		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021a-qspi", "fsl,ls2080a-qspi"
-		 or
-		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
-  - reg : the first contains the register location and length,
-          the second contains the memory mapping address and length
-  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-  - interrupts : Should contain the interrupt for the device
-  - clocks : The clocks needed by the QuadSPI controller
-  - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
-
-Required SPI slave node properties:
-  - reg: There are two buses (A and B) with two chip selects each.
-	 This encodes to which bus and CS the flash is connected:
-		<0>: Bus A, CS 0
-		<1>: Bus A, CS 1
-		<2>: Bus B, CS 0
-		<3>: Bus B, CS 1
-
-Example:
-
-qspi0: quadspi@40044000 {
-	compatible = "fsl,vf610-qspi";
-	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
-	reg-names = "QuadSPI", "QuadSPI-memory";
-	interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks VF610_CLK_QSPI0_EN>,
-		<&clks VF610_CLK_QSPI0>;
-	clock-names = "qspi_en", "qspi";
-
-	flash0: s25fl128s@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl128s", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-Example showing the usage of two SPI NOR devices on bus A:
-
-&qspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi2>;
-	status = "okay";
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <0>;
-	};
-
-	flash1: n25q256a@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <1>;
-	};
-};