1 files changed, 0 insertions, 44 deletions
diff --git a/dts/Bindings/spi/spi-sun6i.txt b/dts/Bindings/spi/spi-sun6i.txt
deleted file mode 100644
index 435a8e0731..0000000000
--- a/dts/Bindings/spi/spi-sun6i.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Allwinner A31/H3 SPI controller
-
-Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: phandle to the clocks feeding the SPI controller. Two are
-          needed:
-  - "ahb": the gated AHB parent clock
-  - "mod": the parent module clock
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset controller asserting this device in
-          reset
-
-Optional properties:
-- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "rx" and "tx" if present.
-
-Example:
-
-spi1: spi@1c69000 {
-	compatible = "allwinner,sun6i-a31-spi";
-	reg = <0x01c69000 0x1000>;
-	interrupts = <0 66 4>;
-	clocks = <&ahb1_gates 21>, <&spi1_clk>;
-	clock-names = "ahb", "mod";
-	resets = <&ahb1_rst 21>;
-};
-
-spi0: spi@1c68000 {
-	compatible = "allwinner,sun8i-h3-spi";
-	reg = <0x01c68000 0x1000>;
-	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
-	clock-names = "ahb", "mod";
-	dmas = <&dma 23>, <&dma 23>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	resets = <&ccu RST_BUS_SPI0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};