1 files changed, 89 insertions, 0 deletions
diff --git a/dts/Bindings/thermal/thermal-generic-adc.txt b/dts/Bindings/thermal/thermal-generic-adc.txt
new file mode 100644
index 0000000000..d72355502b
--- /dev/null
+++ b/dts/Bindings/thermal/thermal-generic-adc.txt
@@ -0,0 +1,89 @@
+General Purpose Analog To Digital Converter (ADC) based thermal sensor.
+
+On some of platforms, thermal sensor like thermistors are connected to
+one of ADC channel and sensor resistance is read via voltage across the
+sensor resistor. The voltage read across the sensor is mapped to
+temperature using voltage-temperature lookup table.
+
+Required properties:
+===================
+- compatible:		     Must be "generic-adc-thermal".
+- temperature-lookup-table:  Two dimensional array of Integer; lookup table
+			     to map the relation between ADC value and
+			     temperature. When ADC is read, the value is
+			     looked up on the table to get the equivalent
+			     temperature.
+			     The first value of the each row of array is the
+			     temperature in milliCelsius and second value of
+			     the each row of array is the ADC read value.
+- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+			     of this property.
+
+Example :
+#include <dt-bindings/thermal/thermal.h>
+
+i2c@7000c400 {
+	ads1015: ads1015@4a {
+		reg = <0x4a>;
+		compatible = "ads1015";
+		sampling-frequency = <3300>;
+		#io-channel-cells = <1>;
+	};
+};
+
+tboard_thermistor: thermal-sensor {
+	compatible = "generic-adc-thermal";
+	#thermal-sensor-cells = <0>;
+	io-channels = <&ads1015 1>;
+	io-channel-names = "sensor-channel";
+	temperature-lookup-table = <    (-40000) 2578
+					(-39000) 2577
+					(-38000) 2576
+					(-37000) 2575
+					(-36000) 2574
+					(-35000) 2573
+					(-34000) 2572
+					(-33000) 2571
+					(-32000) 2569
+					(-31000) 2568
+					(-30000) 2567
+					::::::::::
+					118000 254
+					119000 247
+					120000 240
+					121000 233
+					122000 226
+					123000 220
+					124000 214
+					125000 208>;
+};
+
+dummy_cool_dev: dummy-cool-dev {
+	compatible = "dummy-cooling-dev";
+	#cooling-cells = <2>; /* min followed by max */
+};
+
+thermal-zones {
+	Tboard {
+		polling-delay = <15000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor>;
+
+		trips {
+			therm_est_trip: therm_est_trip {
+				temperature = <40000>;
+				type = "active";
+				hysteresis = <1000>;
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&therm_est_trip>;
+				cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+
+		};
+	};
+};