diff options
Diffstat (limited to 'dts/Bindings/timer')
| -rw-r--r-- | dts/Bindings/timer/amlogic,meson6-timer.txt | 11 | ||||
| -rw-r--r-- | dts/Bindings/timer/arm,arch_timer.txt | 112 | ||||
| -rw-r--r-- | dts/Bindings/timer/arm,arch_timer.yaml | 103 | ||||
| -rw-r--r-- | dts/Bindings/timer/arm,arch_timer_mmio.yaml | 120 | ||||
| -rw-r--r-- | dts/Bindings/timer/arm,global_timer.txt | 27 | ||||
| -rw-r--r-- | dts/Bindings/timer/arm,global_timer.yaml | 46 | ||||
| -rw-r--r-- | dts/Bindings/timer/mrvl,mmp-timer.txt | 4 | ||||
| -rw-r--r-- | dts/Bindings/timer/rda,8810pl-timer.txt | 20 | ||||
| -rw-r--r-- | dts/Bindings/timer/renesas,cmt.txt | 15 | ||||
| -rw-r--r-- | dts/Bindings/timer/rockchip,rk-timer.txt | 1 |
10 files changed, 315 insertions, 144 deletions
diff --git a/dts/Bindings/timer/amlogic,meson6-timer.txt b/dts/Bindings/timer/amlogic,meson6-timer.txt index a092053f79..a9da22bda9 100644 --- a/dts/Bindings/timer/amlogic,meson6-timer.txt +++ b/dts/Bindings/timer/amlogic,meson6-timer.txt @@ -4,12 +4,19 @@ Required properties: - compatible : should be "amlogic,meson6-timer" - reg : Specifies base physical address and size of the registers. -- interrupts : The interrupt of the first timer +- interrupts : The four interrupts, one for each timer event +- clocks : phandles to the pclk (system clock) and XTAL clocks +- clock-names : must contain "pclk" and "xtal" Example: timer@c1109940 { compatible = "amlogic,meson6-timer"; reg = <0xc1109940 0x14>; - interrupts = <0 10 1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; }; diff --git a/dts/Bindings/timer/arm,arch_timer.txt b/dts/Bindings/timer/arm,arch_timer.txt deleted file mode 100644 index 68301b77e8..0000000000 --- a/dts/Bindings/timer/arm,arch_timer.txt +++ /dev/null @@ -1,112 +0,0 @@ -* ARM architected timer - -ARM cores may have a per-core architected timer, which provides per-cpu timers, -or a memory mapped architected timer, which provides up to 8 frames with a -physical and optional virtual timer per frame. - -The per-core architected timer is attached to a GIC to deliver its -per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC -to deliver its interrupts via SPIs. - -** CP15 Timer node properties: - -- compatible : Should at least contain one of - "arm,armv7-timer" - "arm,armv8-timer" - -- interrupts : Interrupt list for secure, non-secure, virtual and - hypervisor timers, in that order. - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only where necessary to work around broken firmware which does not configure - CNTFRQ on all CPUs to a uniform correct value. Use of this property is - strongly discouraged; fix your firmware unless absolutely impossible. - -- always-on : a boolean property. If present, the timer is powered through an - always-on power domain, therefore it never loses context. - -- fsl,erratum-a008585 : A boolean property. Indicates the presence of - QorIQ erratum A-008585, which says that reading the counter is - unreliable unless the same value is returned by back-to-back reads. - This also affects writes to the tval register, due to the implicit - counter read. - -- hisilicon,erratum-161010101 : A boolean property. Indicates the - presence of Hisilicon erratum 161010101, which says that reading the - counters is unreliable in some cases, and reads may return a value 32 - beyond the correct value. This also affects writes to the tval - registers, due to the implicit counter read. - -** Optional properties: - -- arm,cpu-registers-not-fw-configured : Firmware does not initialize - any of the generic timer CPU registers, which contain their - architecturally-defined reset values. Only supported for 32-bit - systems which follow the ARMv7 architected reset values. - -- arm,no-tick-in-suspend : The main counter does not tick when the system is in - low-power system suspend on some SoCs. This behavior does not match the - Architecture Reference Manual's specification that the system counter "must - be implemented in an always-on power domain." - - -Example: - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - -** Memory mapped timer node properties: - -- compatible : Should at least contain "arm,armv7-timer-mem". - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only when firmware has not configured the MMIO CNTFRQ registers. - -- reg : The control frame base address. - -Note that #address-cells, #size-cells, and ranges shall be present to ensure -the CPU can address a frame's registers. - -A timer node has up to 8 frame sub-nodes, each with the following properties: - -- frame-number: 0 to 7. - -- interrupts : Interrupt list for physical and virtual timers in that order. - The virtual timer interrupt is optional. - -- reg : The first and second view base addresses in that order. The second view - base address is optional. - -- status : "disabled" indicates the frame is not available for use. Optional. - -Example: - - timer@f0000000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0xf0000000 0x1000>; - clock-frequency = <50000000>; - - frame@f0001000 { - frame-number = <0> - interrupts = <0 13 0x8>, - <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; - }; - - frame@f0003000 { - frame-number = <1> - interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; - }; - }; diff --git a/dts/Bindings/timer/arm,arch_timer.yaml b/dts/Bindings/timer/arm,arch_timer.yaml new file mode 100644 index 0000000000..6deead0772 --- /dev/null +++ b/dts/Bindings/timer/arm,arch_timer.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> +description: |+ + ARM cores may have a per-core architected timer, which provides per-cpu timers, + or a memory mapped architected timer, which provides up to 8 frames with a + physical and optional virtual timer per frame. + + The per-core architected timer is attached to a GIC to deliver its + per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC + to deliver its interrupts via SPIs. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,cortex-a15-timer + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv8-timer + + interrupts: + items: + - description: secure timer irq + - description: non-secure timer irq + - description: virtual timer irq + - description: hypervisor timer irq + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + fsl,erratum-a008585: + type: boolean + description: Indicates the presence of QorIQ erratum A-008585, which says + that reading the counter is unreliable unless the same value is returned + by back-to-back reads. This also affects writes to the tval register, due + to the implicit counter read. + + hisilicon,erratum-161010101: + type: boolean + description: Indicates the presence of Hisilicon erratum 161010101, which + says that reading the counters is unreliable in some cases, and reads may + return a value 32 beyond the correct value. This also affects writes to + the tval registers, due to the implicit counter read. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +required: + - compatible + +oneOf: + - required: + - interrupts + - required: + - interrupts-extended + +examples: + - | + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + +... diff --git a/dts/Bindings/timer/arm,arch_timer_mmio.yaml b/dts/Bindings/timer/arm,arch_timer_mmio.yaml new file mode 100644 index 0000000000..c4ab59550f --- /dev/null +++ b/dts/Bindings/timer/arm,arch_timer_mmio.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM memory mapped architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> + +description: |+ + ARM cores may have a memory mapped architected timer, which provides up to 8 + frames with a physical and optional virtual timer per frame. + + The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs. + +properties: + compatible: + items: + - enum: + - arm,armv7-timer-mem + + reg: + maxItems: 1 + description: The control frame base address + + '#address-cells': + enum: [1, 2] + + '#size-cells': + const: 1 + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +patternProperties: + '^frame@[0-9a-z]*$': + description: A timer node has up to 8 frame sub-nodes, each with the following properties. + properties: + frame-number: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 7 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: physical timer irq + - description: virtual timer irq + + reg : + minItems: 1 + maxItems: 2 + items: + - description: 1st view base address + - description: 2nd optional view base address + + required: + - frame-number + - interrupts + - reg + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0>; + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1>; + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + }; + }; + +... diff --git a/dts/Bindings/timer/arm,global_timer.txt b/dts/Bindings/timer/arm,global_timer.txt deleted file mode 100644 index bdae3a8187..0000000000 --- a/dts/Bindings/timer/arm,global_timer.txt +++ /dev/null @@ -1,27 +0,0 @@ - -* ARM Global Timer - Cortex-A9 are often associated with a per-core Global timer. - -** Timer node required properties: - -- compatible : should contain - * "arm,cortex-a5-global-timer" for Cortex-A5 global timers. - * "arm,cortex-a9-global-timer" for Cortex-A9 global - timers or any compatible implementation. Note: driver - supports versions r2p0 and above. - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the GT timer - register window. - -- clocks : Should be phandle to a clock. - -Example: - - timer@2c000600 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - clocks = <&arm_periph_clk>; - }; diff --git a/dts/Bindings/timer/arm,global_timer.yaml b/dts/Bindings/timer/arm,global_timer.yaml new file mode 100644 index 0000000000..21c24a8e28 --- /dev/null +++ b/dts/Bindings/timer/arm,global_timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,global_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Global Timer + +maintainers: + - Stuart Menefy <stuart.menefy@st.com> + +description: + Cortex-A9 are often associated with a per-core Global timer. + +properties: + compatible: + items: + - enum: + - arm,cortex-a5-global-timer + - arm,cortex-a9-global-timer + + description: driver supports versions r2p0 and above. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + timer@2c000600 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf01>; + clocks = <&arm_periph_clk>; + }; +... diff --git a/dts/Bindings/timer/mrvl,mmp-timer.txt b/dts/Bindings/timer/mrvl,mmp-timer.txt index 9a6e251462..b8f02c6635 100644 --- a/dts/Bindings/timer/mrvl,mmp-timer.txt +++ b/dts/Bindings/timer/mrvl,mmp-timer.txt @@ -5,9 +5,13 @@ Required properties: - reg : Address and length of the register set of timer controller. - interrupts : Should be the interrupt number. +Optional properties: +- clocks : Should contain a single entry describing the clock input. + Example: timer0: timer@d4014000 { compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&coreclk 2>; }; diff --git a/dts/Bindings/timer/rda,8810pl-timer.txt b/dts/Bindings/timer/rda,8810pl-timer.txt new file mode 100644 index 0000000000..4db542c9a0 --- /dev/null +++ b/dts/Bindings/timer/rda,8810pl-timer.txt @@ -0,0 +1,20 @@ +RDA Micro RDA8810PL Timer + +Required properties: +- compatible : "rda,8810pl-timer" +- reg : Offset and length of the register set for the device. +- interrupts : Should contain two interrupts. +- interrupt-names : Should be "hwtimer", "ostimer". + +Example: + + apb@20900000 { + compatible = "simple-bus"; + ... + timer@10000 { + compatible = "rda,8810pl-timer"; + reg = <0x10000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt index 33992679a8..862a80f038 100644 --- a/dts/Bindings/timer/renesas,cmt.txt +++ b/dts/Bindings/timer/renesas,cmt.txt @@ -28,6 +28,10 @@ Required Properties: - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744. - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. + - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470. + - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. + - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. + - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. @@ -36,6 +40,8 @@ Required Properties: - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. + - "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796. - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970. - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. @@ -47,9 +53,12 @@ Required Properties: and RZ/G1. These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries listed above. - - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3. - - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3. - These are fallbacks for R-Car Gen3 entries listed above. + - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3 + and RZ/G2. + - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3 + and RZ/G2. + These are fallbacks for R-Car Gen3 and RZ/G2 entries listed + above. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. diff --git a/dts/Bindings/timer/rockchip,rk-timer.txt b/dts/Bindings/timer/rockchip,rk-timer.txt index 16a5f4577a..d65fdce7c7 100644 --- a/dts/Bindings/timer/rockchip,rk-timer.txt +++ b/dts/Bindings/timer/rockchip,rk-timer.txt @@ -2,6 +2,7 @@ Rockchip rk timer Required properties: - compatible: should be: + "rockchip,rv1108-timer", "rockchip,rk3288-timer": for Rockchip RV1108 "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036 "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066 "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188 |