diff options
Diffstat (limited to 'dts/Bindings/usb/amlogic,dwc3.txt')
| -rw-r--r-- | dts/Bindings/usb/amlogic,dwc3.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/dts/Bindings/usb/amlogic,dwc3.txt b/dts/Bindings/usb/amlogic,dwc3.txt new file mode 100644 index 0000000000..9a8b631904 --- /dev/null +++ b/dts/Bindings/usb/amlogic,dwc3.txt @@ -0,0 +1,42 @@ +Amlogic Meson GX DWC3 USB SoC controller + +Required properties: +- compatible: depending on the SoC this should contain one of: + * amlogic,meson-axg-dwc3 + * amlogic,meson-gxl-dwc3 +- clocks: a handle for the "USB general" clock +- clock-names: must be "usb_general" +- resets: a handle for the shared "USB OTG" reset line +- reset-names: must be "usb_otg" + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +PHY documentation is provided in the following places: +- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt +- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt + +Example device nodes: + usb0: usb@ff500000 { + compatible = "amlogic,meson-axg-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + clock-names = "usb_general"; + resets = <&reset RESET_USB_OTG>; + reset-names = "usb_otg"; + + dwc3: dwc3@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + phys = <&usb3_phy>, <&usb2_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; |