diff options
Diffstat (limited to 'dts/Bindings/usb/nvidia,tegra20-usb-phy.txt')
| -rw-r--r-- | dts/Bindings/usb/nvidia,tegra20-usb-phy.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt b/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt index ba797d3e63..c9205fbf26 100644 --- a/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt @@ -20,6 +20,12 @@ Required properties : Present if phy_type == utmi. - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2). Present if phy_type == ulpi, and ULPI link mode is in use. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb: The PHY's own reset signal. + - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control + registers. Required even if phy_type == ulpi. Required properties for phy_type == ulpi: - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. @@ -56,6 +62,8 @@ Optional properties: host means this is a host controller peripheral means it is device controller otg means it can operate as either ("on the go") + - nvidia,has-utmi-pad-registers : boolean indicates whether this controller + contains the UTMI pad control registers common to all USB controllers. VBUS control (required for dr_mode == otg, optional for dr_mode == host): - vbus-supply: regulator for VBUS |