diff options
Diffstat (limited to 'dts/Bindings/usb/qcom,dwc3.yaml')
| -rw-r--r-- | dts/Bindings/usb/qcom,dwc3.yaml | 444 |
1 files changed, 393 insertions, 51 deletions
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml index ce252db2aa..63d150b216 100644 --- a/dts/Bindings/usb/qcom,dwc3.yaml +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -7,30 +7,47 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: items: - enum: - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 + - qcom,ipq5332-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 + - qcom,ipq8074-dwc3 + - qcom,ipq9574-dwc3 - qcom,msm8953-dwc3 + - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,qcm2290-dwc3 + - qcom,qcs404-dwc3 + - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 - qcom,sdm660-dwc3 + - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 - qcom,sm4250-dwc3 - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 + - qcom,sm6375-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + - qcom,x1e80100-dwc3 - const: qcom,dwc3 reg: @@ -49,37 +66,27 @@ properties: description: specifies a phandle to PM domain provider node maxItems: 1 + required-opps: + maxItems: 1 + clocks: - description: - A list of phandle and clock-specifier pairs for the clocks - listed in clock-names. - items: - - description: System Config NOC clock. - - description: Master/Core clock, has to be >= 125 MHz - for SS operation and >= 60MHz for HS operation. - - description: System bus AXI clock. - - description: Mock utmi clock needed for ITP/SOF generation - in host mode. Its frequency should be 19.2MHz. - - description: Sleep clock, used for wakeup when - USB3 core goes into low power mode (U3). + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - cfg_noc:: System Config NOC clock. + - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >= + 60MHz for HS operation. + - iface:: System bus AXI clock. + - sleep:: Sleep clock, used for wakeup when USB3 core goes into low + power mode (U3). + - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host + mode. Its frequency should be 19.2MHz. + minItems: 1 + maxItems: 9 clock-names: - items: - - const: cfg_noc - - const: core - - const: iface - - const: mock_utmi - - const: sleep - - assigned-clocks: - items: - - description: Phandle and clock specifier of MOCK_UTMI_CLK. - - description: Phandle and clock specifoer of MASTER_CLK. + minItems: 1 + maxItems: 9 - assigned-clock-rates: - items: - - description: Must be 19.2MHz (19200000). - - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. resets: maxItems: 1 @@ -92,20 +99,29 @@ properties: - const: apps-usb interrupts: - items: - - description: The interrupt that is asserted - when a wakeup event is received on USB2 bus. - - description: The interrupt that is asserted - when a wakeup event is received on USB3 bus. - - description: Wakeup event on DM line. - - description: Wakeup event on DP line. + description: | + Different types of interrupts are used based on HS PHY used on target: + - pwr_event: Used for wakeup based on other power events. + - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + hs_phy_irq which is not triggered by default and its + functionality is mutually exclusive to that of + {dp/dm}_hs_phy_irq and qusb2_phy_irq. + - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and + expose only a single IRQ whose behavior can be modified + by the QUSB2PHY_INTR_CTRL register. The required DPSE/ + DMSE configuration is done in QUSB2PHY_INTR_CTRL register + of PHY address space. + - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/ + DM pads of the SoC. These are used for wakeup + only on SoCs with non-QUSB2 targets with + exception of SDM670/SDM845/SM6350. + - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. + minItems: 2 + maxItems: 5 interrupt-names: - items: - - const: hs_phy_irq - - const: ss_phy_irq - - const: dm_hs_phy_irq - - const: dp_hs_phy_irq + minItems: 2 + maxItems: 5 qcom,select-utmi-as-pipe-clk: description: @@ -114,11 +130,17 @@ properties: HS/FS/LS modes are supported. type: boolean + wakeup-source: true + # Required child node: patternProperties: "^usb@[0-9a-f]+$": $ref: snps,dwc3.yaml# + unevaluatedProperties: false + + properties: + wakeup-source: false required: - compatible @@ -126,12 +148,328 @@ required: - "#address-cells" - "#size-cells" - ranges - - power-domains - clocks - clock-names - interrupts - interrupt-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8064-dwc3 + then: + properties: + clocks: + items: + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq9574-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm6350-dwc3 + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + oneOf: + - items: + - const: core + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,ipq5332-dwc3 + - qcom,msm8994-dwc3 + - qcom,qcs404-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3 + - qcom,x1e80100-dwc3 + then: + properties: + clocks: + maxItems: 9 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: noc_aggr + - const: noc_aggr_north + - const: noc_aggr_south + - const: noc_sys + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dwc3 + then: + properties: + clocks: + minItems: 4 + maxItems: 5 + clock-names: + oneOf: + - items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-dwc3 + then: + properties: + clocks: + minItems: 5 + maxItems: 6 + clock-names: + minItems: 5 + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,ipq6018-dwc3 + - qcom,ipq8074-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8998-dwc3 + then: + properties: + interrupts: + minItems: 2 + maxItems: 3 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dwc3 + - qcom,qcs404-dwc3 + - qcom,sdm660-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-dwc3 + - qcom,x1e80100-dwc3 + then: + properties: + interrupts: + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + - qcom,ipq8064-dwc3 + - qcom,msm8994-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + interrupts: + minItems: 4 + maxItems: 5 + interrupt-names: + items: + - const: pwr_event + - const: hs_phy_irq + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + additionalProperties: false examples: @@ -153,21 +491,25 @@ examples: clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; |