diff options
Diffstat (limited to 'dts/Bindings/usb/qcom,dwc3.yaml')
| -rw-r--r-- | dts/Bindings/usb/qcom,dwc3.yaml | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml new file mode 100644 index 0000000000..dac10848dd --- /dev/null +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +properties: + compatible: + items: + - enum: + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 + - qcom,sdm845-dwc3 + - const: qcom,dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: System Config NOC clock. + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + - description: System bus AXI clock. + - description: Mock utmi clock needed for ITP/SOF generation + in host mode. Its frequency should be 19.2MHz. + - description: Sleep clock, used for wakeup when + USB3 core goes into low power mode (U3). + + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: mock_utmi + - const: sleep + + assigned-clocks: + items: + - description: Phandle and clock specifier of MOCK_UTMI_CLK. + - description: Phandle and clock specifoer of MASTER_CLK. + + assigned-clock-rates: + items: + - description: Must be 19.2MHz (19200000). + - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. + resets: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: usb-ddr + - const: apps-usb + + interrupts: + items: + - description: The interrupt that is asserted + when a wakeup event is received on USB2 bus. + - description: The interrupt that is asserted + when a wakeup event is received on USB3 bus. + - description: Wakeup event on DM line. + - description: Wakeup event on DP line. + + interrupt-names: + items: + - const: hs_phy_irq + - const: ss_phy_irq + - const: dm_hs_phy_irq + - const: dp_hs_phy_irq + + qcom,select-utmi-as-pipe-clk: + description: + If present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - power-domains + - clocks + - clock-names + - interrupts + - interrupt-names + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + }; |