1 files changed, 59 insertions, 0 deletions
diff --git a/dts/Bindings/usb/rockchip,dwc3.txt b/dts/Bindings/usb/rockchip,dwc3.txt
new file mode 100644
index 0000000000..0536a938e3
--- /dev/null
+++ b/dts/Bindings/usb/rockchip,dwc3.txt
@@ -0,0 +1,59 @@
+Rockchip SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- clocks:	A list of phandle + clock-specifier pairs for the
+		clocks listed in clock-names
+- clock-names:	Should contain the following:
+  "ref_clk"	Controller reference clk, have to be 24 MHz
+  "suspend_clk"	Controller suspend clk, have to be 24 MHz or 32 KHz
+  "bus_clk"	Master/Core clock, have to be >= 62.5 MHz for SS
+		operation and >= 30MHz for HS operation
+  "grf_clk"	Controller grf clk
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+
+Example device nodes:
+
+	usbdrd3_0: usb@fe800000 {
+		compatible = "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "grf_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+		usbdrd_dwc3_0: dwc3@fe800000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe800000 0x0 0x100000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+	};
+
+	usbdrd3_1: usb@fe900000 {
+		compatible = "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "grf_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+		usbdrd_dwc3_1: dwc3@fe900000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe900000 0x0 0x100000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+	};