diff options
Diffstat (limited to 'dts/Bindings/usb/usb-conn-gpio.txt')
| -rw-r--r-- | dts/Bindings/usb/usb-conn-gpio.txt | 30 |
1 files changed, 0 insertions, 30 deletions
diff --git a/dts/Bindings/usb/usb-conn-gpio.txt b/dts/Bindings/usb/usb-conn-gpio.txt deleted file mode 100644 index 3d05ae56cb..0000000000 --- a/dts/Bindings/usb/usb-conn-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -USB GPIO Based Connection Detection - -This is typically used to switch dual role mode from the USB ID pin connected -to an input GPIO, and also used to enable/disable device mode from the USB -Vbus pin connected to an input GPIO. - -Required properties: -- compatible : should include "gpio-usb-b-connector" and "usb-b-connector". -- id-gpios, vbus-gpios : input gpios, either one of them must be present, - and both can be present as well. - see connector/usb-connector.txt - -Optional properties: -- vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.txt - -- Sub-nodes: - - port : can be present. - see graph.txt - -Example: - -&mtu3 { - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_p0_vbus>; - }; -}; |