diff options
Diffstat (limited to 'dts/Bindings/usb')
| -rw-r--r-- | dts/Bindings/usb/dwc3.txt | 6 | ||||
| -rw-r--r-- | dts/Bindings/usb/fsl-usb.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/usb/maxim,max3421.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/usb/npcm7xx-usb.txt | 18 | ||||
| -rw-r--r-- | dts/Bindings/usb/richtek,rt1711h.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/usb/samsung-hsotg.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/usb/spear-usb.txt | 4 | ||||
| -rw-r--r-- | dts/Bindings/usb/typec-tcpci.txt | 49 | ||||
| -rw-r--r-- | dts/Bindings/usb/usb-xhci.txt | 1 |
9 files changed, 74 insertions, 13 deletions
diff --git a/dts/Bindings/usb/dwc3.txt b/dts/Bindings/usb/dwc3.txt index 7f13ebef06..3e4c38b806 100644 --- a/dts/Bindings/usb/dwc3.txt +++ b/dts/Bindings/usb/dwc3.txt @@ -96,6 +96,11 @@ Optional properties: enable periodic ESS TX threshold. - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 + register, undefined length INCR burst type enable and INCRx type. + When just one value, which means INCRX burst mode enabled. When + more than one value, which means undefined length INCR burst type + enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. - in addition all properties from usb-xhci.txt from the current directory are supported as well @@ -108,4 +113,5 @@ dwc3@4a030000 { reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; diff --git a/dts/Bindings/usb/fsl-usb.txt b/dts/Bindings/usb/fsl-usb.txt index 4779c029b6..0b08b006c5 100644 --- a/dts/Bindings/usb/fsl-usb.txt +++ b/dts/Bindings/usb/fsl-usb.txt @@ -33,8 +33,6 @@ Recommended properties : information for the interrupt. This should be encoded based on the information in section 2) depending on the type of interrupt controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. Optional properties : - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the diff --git a/dts/Bindings/usb/maxim,max3421.txt b/dts/Bindings/usb/maxim,max3421.txt index 8cdbe0c851..90495b1aee 100644 --- a/dts/Bindings/usb/maxim,max3421.txt +++ b/dts/Bindings/usb/maxim,max3421.txt @@ -11,9 +11,6 @@ Required properties: The driver configures MAX3421E for active low level triggered interrupts, configure your interrupt line accordingly. -Optional property: - - interrupt-parent: the phandle to the associated interrupt controller. - Example: usb@0 { diff --git a/dts/Bindings/usb/npcm7xx-usb.txt b/dts/Bindings/usb/npcm7xx-usb.txt new file mode 100644 index 0000000000..5a0f1f14fb --- /dev/null +++ b/dts/Bindings/usb/npcm7xx-usb.txt @@ -0,0 +1,18 @@ +Nuvoton NPCM7XX SoC USB controllers: +----------------------------- + +EHCI: +----- + +Required properties: +- compatible: "nuvoton,npcm750-ehci" +- interrupts: Should contain the EHCI interrupt +- reg: Physical address and length of the register set for the device + +Example: + + ehci1: usb@f0806000 { + compatible = "nuvoton,npcm750-ehci"; + reg = <0xf0806000 0x1000>; + interrupts = <0 61 4>; + }; diff --git a/dts/Bindings/usb/richtek,rt1711h.txt b/dts/Bindings/usb/richtek,rt1711h.txt index 09e847e92e..d4cf53c071 100644 --- a/dts/Bindings/usb/richtek,rt1711h.txt +++ b/dts/Bindings/usb/richtek,rt1711h.txt @@ -3,8 +3,6 @@ Richtek RT1711H TypeC PD Controller. Required properties: - compatible : Must be "richtek,rt1711h". - reg : Must be 0x4e, it's slave address of RT1711H. - - interrupt-parent : the phandle for the interrupt controller that - provides interrupts for this device. - interrupts : <a b> where a is the interrupt number and b represents an encoding of the sense and level information for the interrupt. diff --git a/dts/Bindings/usb/samsung-hsotg.txt b/dts/Bindings/usb/samsung-hsotg.txt index b83d428a26..0388634598 100644 --- a/dts/Bindings/usb/samsung-hsotg.txt +++ b/dts/Bindings/usb/samsung-hsotg.txt @@ -14,8 +14,6 @@ Binding details Required properties: - compatible: "samsung,s3c6400-hsotg" should be used for all currently supported SoC, -- interrupt-parent: phandle for the interrupt controller to which the - interrupt signal of the HSOTG block is routed, - interrupts: specifier of interrupt signal of interrupt controller, according to bindings of interrupt controller, - clocks: contains an array of clock specifiers: diff --git a/dts/Bindings/usb/spear-usb.txt b/dts/Bindings/usb/spear-usb.txt index f8a464a256..1dc91cc459 100644 --- a/dts/Bindings/usb/spear-usb.txt +++ b/dts/Bindings/usb/spear-usb.txt @@ -6,8 +6,6 @@ EHCI: Required properties: - compatible: "st,spear600-ehci" -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device - interrupts: Should contain the EHCI interrupt Example: @@ -25,8 +23,6 @@ OHCI: Required properties: - compatible: "st,spear600-ohci" -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device - interrupts: Should contain the OHCI interrupt Example: diff --git a/dts/Bindings/usb/typec-tcpci.txt b/dts/Bindings/usb/typec-tcpci.txt new file mode 100644 index 0000000000..0dd1469e73 --- /dev/null +++ b/dts/Bindings/usb/typec-tcpci.txt @@ -0,0 +1,49 @@ +TCPCI(Typec port cotroller interface) binding +--------------------------------------------- + +Required properties: +- compatible: should be set one of following: + - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110. + +- reg: the i2c slave address of typec port controller device. +- interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. +- interrupts: interrupt specification for tcpci alert. + +Required sub-node: +- connector: The "usb-c-connector" attached to the tcpci chip, the bindings + of connector node are specified in + Documentation/devicetree/bindings/connector/usb-connector.txt + +Example: + +ptn5110@50 { + compatible = "nxp,ptn5110"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 12000, 2000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; +}; diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt index bd1dd316fb..ac4cd0d619 100644 --- a/dts/Bindings/usb/usb-xhci.txt +++ b/dts/Bindings/usb/usb-xhci.txt @@ -14,6 +14,7 @@ Required properties: - "renesas,xhci-r8a7795" for r8a7795 SoC - "renesas,xhci-r8a7796" for r8a7796 SoC - "renesas,xhci-r8a77965" for r8a77965 SoC + - "renesas,xhci-r8a77990" for r8a77990 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device |