diff options
Diffstat (limited to 'dts/Bindings/usb')
-rw-r--r-- | dts/Bindings/usb/brcm,bcm3384-usb.txt | 11 | ||||
-rw-r--r-- | dts/Bindings/usb/dwc3.txt | 1 | ||||
-rw-r--r-- | dts/Bindings/usb/renesas_usbhs.txt | 5 | ||||
-rw-r--r-- | dts/Bindings/usb/usbmisc-imx.txt | 1 |
4 files changed, 17 insertions, 1 deletions
diff --git a/dts/Bindings/usb/brcm,bcm3384-usb.txt b/dts/Bindings/usb/brcm,bcm3384-usb.txt new file mode 100644 index 0000000000..452c45c7bf --- /dev/null +++ b/dts/Bindings/usb/brcm,bcm3384-usb.txt @@ -0,0 +1,11 @@ +* Broadcom USB controllers + +Required properties: +- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci" + + These currently use the generic-ohci and generic-ehci drivers. On some + systems, special handling may be needed in the following cases: + + - Restoring state after systemwide power save modes + - Sharing PHYs with the USBD (UDC) hardware + - Figuring out which controllers are disabled on ASIC bondout variants diff --git a/dts/Bindings/usb/dwc3.txt b/dts/Bindings/usb/dwc3.txt index cd7f0454e1..5cc364309e 100644 --- a/dts/Bindings/usb/dwc3.txt +++ b/dts/Bindings/usb/dwc3.txt @@ -14,6 +14,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. + - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas_usbhs.txt index 61b045b6d5..dc2a18f0b3 100644 --- a/dts/Bindings/usb/renesas_usbhs.txt +++ b/dts/Bindings/usb/renesas_usbhs.txt @@ -15,7 +15,10 @@ Optional properties: - phys: phandle + phy specifier pair - phy-names: must be "usb" - dmas: Must contain a list of references to DMA specifiers. - - dma-names : Must contain a list of DMA names, "tx" or "rx". + - dma-names : Must contain a list of DMA names: + - tx0 ... tx<n> + - rx0 ... rx<n> + - This <n> means DnFIFO in USBHS module. Example: usbhs: usb@e6590000 { diff --git a/dts/Bindings/usb/usbmisc-imx.txt b/dts/Bindings/usb/usbmisc-imx.txt index c101a4b171..3539d4e7d2 100644 --- a/dts/Bindings/usb/usbmisc-imx.txt +++ b/dts/Bindings/usb/usbmisc-imx.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 + "fsl,imx6sx-usbmisc" for imx6sx - reg: Should contain registers location and length Examples: |