summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/video/exynos-mic.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/video/exynos-mic.txt')
-rw-r--r--dts/Bindings/video/exynos-mic.txt51
1 files changed, 51 insertions, 0 deletions
diff --git a/dts/Bindings/video/exynos-mic.txt b/dts/Bindings/video/exynos-mic.txt
new file mode 100644
index 0000000000..0fba2ee644
--- /dev/null
+++ b/dts/Bindings/video/exynos-mic.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
+
+MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
+not capable to transfer high resoltuion frame data as decon can send. MIC
+solves this problem by compressing the frame data by 1/2 before it is
+transferred through mipi dsi. The compressed frame data must be uncompressed in
+the panel PCB.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-mic".
+- reg: physical base address and length of the MIC registers set and system
+ register of mic.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
+- samsung,disp-syscon: the reference node for syscon for DISP block.
+- ports: contains a port which is connected to decon node and dsi node.
+ address-cells and size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the
+ decon node or dsi node. The reg value must be 0 and 1 respectively.
+
+Example:
+SoC specific DT entry:
+mic: mic@13930000 {
+ compatible = "samsung,exynos5433-mic";
+ reg = <0x13930000 0x48>;
+ clocks = <&cmu_disp CLK_PCLK_MIC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+ samsung,disp-syscon = <&syscon_disp>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mic_to_decon: endpoint {
+ remote-endpoint = <&decon_to_mic>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mic_to_dsi: endpoint {
+ remote-endpoint = <&dsi_to_mic>;
+ };
+ };
+ };
+};