summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml')
-rw-r--r--dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml127
1 files changed, 127 insertions, 0 deletions
diff --git a/dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml b/dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml
new file mode 100644
index 0000000000..ad27bc5186
--- /dev/null
+++ b/dts/Bindings/watchdog/atmel,at91sam9-wdt.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Watchdog Timers
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+ compatible:
+ const: atmel,at91sam9260-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ atmel,max-heartbeat-sec:
+ description:
+ Should contain the maximum heartbeat value in seconds. This value
+ should be less or equal to 16. It is used to compute the WDV field.
+ maximum: 16
+
+ atmel,min-heartbeat-sec:
+ description:
+ Should contain the minimum heartbeat value in seconds. This value
+ must be smaller than the max-heartbeat-sec value. It is used to
+ compute the WDD field.
+ maximum: 16
+
+ atmel,watchdog-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should be hardware or software.
+ oneOf:
+ - description:
+ Hardware watchdog uses the at91 watchdog reset.
+ const: hardware
+ - description: |
+ Software watchdog uses the watchdog interrupt
+ to trigger a software reset.
+ const: software
+ default: hardware
+
+ atmel,reset-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Should be proc or all. This is valid only when using hardware watchdog.
+ oneOf:
+ - description:
+ Assert peripherals and processor reset signals.
+ const: all
+ - description:
+ Assert the processor reset signal.
+ const: proc
+ default: all
+
+ atmel,disable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Should be present if you want to stop the watchdog.
+
+ atmel,idle-halt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Should be present if you want to stop the watchdog when
+ entering idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stops working while it is in idle state, which is probably
+ not what you want.
+
+ atmel,dbg-halt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Should be present if you want to stop the watchdog when
+ entering debug state.
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - $ref: watchdog.yaml#
+ - if:
+ properties:
+ atmel,reset-type:
+ enum:
+ - all
+ - proc
+ then:
+ properties:
+ atmel,watchdog-type:
+ const: hardware
+
+dependencies:
+ atmel,reset-type: ['atmel,watchdog-type']
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ timeout-sec = <15>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ };