diff options
Diffstat (limited to 'dts/Bindings/watchdog/atmel-sama5d4-wdt.txt')
| -rw-r--r-- | dts/Bindings/watchdog/atmel-sama5d4-wdt.txt | 34 |
1 files changed, 0 insertions, 34 deletions
diff --git a/dts/Bindings/watchdog/atmel-sama5d4-wdt.txt b/dts/Bindings/watchdog/atmel-sama5d4-wdt.txt deleted file mode 100644 index 44727fcc27..0000000000 --- a/dts/Bindings/watchdog/atmel-sama5d4-wdt.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Atmel SAMA5D4 Watchdog Timer (WDT) Controller - -Required properties: -- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt" -- reg: base physical address and length of memory mapped region. - -Optional properties: -- timeout-sec: watchdog timeout value (in seconds). -- interrupts: interrupt number to the CPU. -- atmel,watchdog-type: should be "hardware" or "software". - "hardware": enable watchdog fault reset. A watchdog fault triggers - watchdog reset. - "software": enable watchdog fault interrupt. A watchdog fault asserts - watchdog interrupt. -- atmel,idle-halt: present if you want to stop the watchdog when the CPU is - in idle state. - CAUTION: This property should be used with care, it actually makes the - watchdog not counting when the CPU is in idle state, therefore the - watchdog reset time depends on mean CPU usage and will not reset at all - if the CPU stop working while it is in idle state, which is probably - not what you want. -- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is - in debug state. - -Example: - watchdog@fc068640 { - compatible = "atmel,sama5d4-wdt"; - reg = <0xfc068640 0x10>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>; - timeout-sec = <10>; - atmel,watchdog-type = "hardware"; - atmel,dbg-halt; - atmel,idle-halt; - }; |