summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/watchdog/realtek,otto-wdt.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/watchdog/realtek,otto-wdt.yaml')
-rw-r--r--dts/Bindings/watchdog/realtek,otto-wdt.yaml91
1 files changed, 91 insertions, 0 deletions
diff --git a/dts/Bindings/watchdog/realtek,otto-wdt.yaml b/dts/Bindings/watchdog/realtek,otto-wdt.yaml
new file mode 100644
index 0000000000..11b220a5e0
--- /dev/null
+++ b/dts/Bindings/watchdog/realtek,otto-wdt.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto watchdog timer
+
+maintainers:
+ - Sander Vanheule <sander@svanheule.net>
+
+description: |
+ The timer has two timeout phases. Both phases have a maximum duration of 32
+ prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
+ minimum duration of each phase is one tick. Each phase can trigger an
+ interrupt, although the phase 2 interrupt will occur with the system reset.
+ - Phase 1: During this phase, the WDT can be pinged to reset the timeout.
+ - Phase 2: Starts after phase 1 has timed out, and only serves to give the
+ system some time to clean up, or notify others that it's going to reset.
+ During this phase, pinging the WDT has no effect, and a reset is
+ unavoidable, unless the WDT is disabled.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - realtek,rtl8380-wdt
+ - realtek,rtl8390-wdt
+ - realtek,rtl9300-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: interrupt specifier for pretimeout
+ - description: interrupt specifier for timeout
+
+ interrupt-names:
+ items:
+ - const: phase1
+ - const: phase2
+
+ realtek,reset-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ Specify how the system is reset after a timeout. Defaults to "cpu" if
+ left unspecified.
+ oneOf:
+ - description: Reset the entire chip
+ const: soc
+ - description: |
+ Reset the CPU and IPsec engine, but leave other peripherals untouched
+ const: cpu
+ - description: |
+ Reset the execution pointer, but don't actually reset any hardware
+ const: software
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+dependencies:
+ interrupts: [ interrupt-names ]
+
+examples:
+ - |
+ watchdog: watchdog@3150 {
+ compatible = "realtek,rtl8380-wdt";
+ reg = <0x3150 0xc>;
+
+ realtek,reset-mode = "soc";
+
+ clocks = <&lxbus_clock>;
+ timeout-sec = <20>;
+
+ interrupt-parent = <&rtlintc>;
+ interrupt-names = "phase1", "phase2";
+ interrupts = <19>, <18>;
+ };
+
+...