diff options
Diffstat (limited to 'dts/Bindings')
507 files changed, 13401 insertions, 4435 deletions
diff --git a/dts/Bindings/Makefile b/dts/Bindings/Makefile index 129cf698fa..5e08e3a6a9 100644 --- a/dts/Bindings/Makefile +++ b/dts/Bindings/Makefile @@ -64,9 +64,6 @@ override DTC_FLAGS := \ -Wno-unique_unit_address \ -Wunique_unit_address_if_enabled -# Disable undocumented compatible checks until warning free -override DT_CHECKER_FLAGS ?= - $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE $(call if_changed_rule,chkdt) diff --git a/dts/Bindings/arm/amlogic.yaml b/dts/Bindings/arm/amlogic.yaml index caab7ceeda..949537cea6 100644 --- a/dts/Bindings/arm/amlogic.yaml +++ b/dts/Bindings/arm/amlogic.yaml @@ -7,19 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic SoC based Platforms maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + - Jerome Brunet <jbrunet@baylibre.com> - Kevin Hilman <khilman@baylibre.com> -description: |+ - Work in progress statement: - - Device tree files and bindings applying to Amlogic SoCs and boards are - considered "unstable". Any Amlogic device tree binding may change at - any time. Be sure to use a device tree binary and a kernel image - generated from the same source tree. - - Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a - stable binding/ABI. - properties: $nodename: const: '/' @@ -146,6 +138,7 @@ properties: - enum: - amediatech,x96-max - amlogic,u200 + - freebox,fbx8am - radxa,zero - seirobotics,sei510 - const: amlogic,g12a diff --git a/dts/Bindings/arm/arm,realview.yaml b/dts/Bindings/arm/arm,realview.yaml index d1bdee98f9..3c5f1688db 100644 --- a/dts/Bindings/arm/arm,realview.yaml +++ b/dts/Bindings/arm/arm,realview.yaml @@ -10,9 +10,9 @@ maintainers: - Linus Walleij <linus.walleij@linaro.org> description: |+ - The ARM RealView series of reference designs were built to explore the ARM - 11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to - the earlier CPUs such as TrustZone and multicore (MPCore). + The ARM RealView series of reference designs were built to explore the Arm11, + Cortex-A8, and Cortex-A9 CPUs. This included new features compared to the + earlier CPUs such as TrustZone and multicore (MPCore). properties: $nodename: diff --git a/dts/Bindings/arm/atmel-at91.yaml b/dts/Bindings/arm/atmel-at91.yaml index 89d75fbb1d..82f37328cc 100644 --- a/dts/Bindings/arm/atmel-at91.yaml +++ b/dts/Bindings/arm/atmel-at91.yaml @@ -179,6 +179,12 @@ properties: - const: microchip,sama7g5 - const: microchip,sama7 + - description: Microchip SAMA7G54 Curiosity Board + items: + - const: microchip,sama7g54-curiosity + - const: microchip,sama7g5 + - const: microchip,sama7 + - description: Microchip LAN9662 Evaluation Boards. items: - enum: diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml index 228dcc5c7d..0027201e19 100644 --- a/dts/Bindings/arm/fsl.yaml +++ b/dts/Bindings/arm/fsl.yaml @@ -384,7 +384,8 @@ properties: - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board - - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1 + - toradex,apalis_imx6q-eval-v1.2 # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2 - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -469,6 +470,7 @@ properties: - prt,prtvt7 # Protonic VT7 board - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board - riot,imx6s-riotboard # RIoTboard i.MX6S + - sielaff,imx6dl-board # Sielaff i.MX6 Solo Board - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2 - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6 - solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite @@ -708,6 +710,7 @@ properties: - toradex,colibri-imx6ull # Colibri iMX6ULL Modules - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules + - uni-t,uti260b # UNI-T UTi260B Thermal Camera - const: fsl,imx6ull - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board @@ -1026,7 +1029,7 @@ properties: items: - enum: - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board - - rve,rve-gateway # i.MX8MN RVE Gateway Board + - rve,gateway # i.MX8MN RVE Gateway Board - variscite,var-som-mx8mn-symphony - const: variscite,var-som-mx8mn - const: fsl,imx8mn @@ -1194,7 +1197,8 @@ properties: - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules items: - enum: - - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation Board + - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board + - toradex,apalis-imx8-eval-v1.2 # Apalis iMX8 Module on Apalis Evaluation V1.2 Board - toradex,apalis-imx8-ixora-v1.1 # Apalis iMX8 Module on Ixora V1.1 Carrier Board - const: toradex,apalis-imx8 - const: fsl,imx8qm @@ -1202,7 +1206,8 @@ properties: - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules items: - enum: - - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. Board + - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board + - toradex,apalis-imx8-v1.1-eval-v1.2 # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board - const: toradex,apalis-imx8-v1.1 @@ -1232,6 +1237,22 @@ properties: - const: toradex,colibri-imx8x - const: fsl,imx8qxp + - description: + TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip + variants. It is designed to be clicked on different carrier boards + MBa8Xx is the starterkit + oneOf: + - items: + - enum: + - tq,imx8dxp-tqma8xdp-mba8xx # TQ-Systems GmbH TQMa8XDP SOM on MBa8Xx + - const: tq,imx8dxp-tqma8xdp # TQ-Systems GmbH TQMa8XDP SOM (with i.MX8DXP) + - const: fsl,imx8dxp + - items: + - enum: + - tq,imx8qxp-tqma8xqp-mba8xx # TQ-Systems GmbH TQMa8XQP SOM on MBa8Xx + - const: tq,imx8qxp-tqma8xqp # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP) + - const: fsl,imx8qxp + - description: i.MX8ULP based Boards items: - enum: @@ -1275,6 +1296,18 @@ properties: - const: tq,imx93-tqma9352 # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM - const: fsl,imx93 + - description: PHYTEC phyCORE-i.MX93 SoM based boards + items: + - const: phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93 + - const: phytec,imx93-phycore-som # phyCORE-i.MX93 SoM + - const: fsl,imx93 + + - description: Variscite VAR-SOM-MX93 based boards + items: + - const: variscite,var-som-mx93-symphony + - const: variscite,var-som-mx93 + - const: fsl,imx93 + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/dts/Bindings/arm/marvell/armada-38x.txt b/dts/Bindings/arm/marvell/armada-38x.txt deleted file mode 100644 index 202953f188..0000000000 --- a/dts/Bindings/arm/marvell/armada-38x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Marvell Armada 38x Platforms Device Tree Bindings -------------------------------------------------- - -Boards with a SoC of the Marvell Armada 38x family shall have the -following property: - -Required root node property: - - - compatible: must contain "marvell,armada380" - -In addition, boards using the Marvell Armada 385 SoC shall have the -following property before the previous one: - -Required root node property: - -compatible: must contain "marvell,armada385" - -In addition, boards using the Marvell Armada 388 SoC shall have the -following property before the previous one: - -Required root node property: - -compatible: must contain "marvell,armada388" - -Example: - -compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; diff --git a/dts/Bindings/arm/marvell/armada-38x.yaml b/dts/Bindings/arm/marvell/armada-38x.yaml new file mode 100644 index 0000000000..cdf805b5db --- /dev/null +++ b/dts/Bindings/arm/marvell/armada-38x.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/armada-38x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 38x Platforms + +maintainers: + - Gregory CLEMENT <gregory.clement@bootlin.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: + Netgear Armada 380 GS110EM Managed Switch. + items: + - const: netgear,gs110emx + - const: marvell,armada380 + + - description: + Marvell Armada 385 Development Boards. + items: + - enum: + - marvell,a385-db-amc + - marvell,a385-db-ap + - const: marvell,armada385 + - const: marvell,armada380 + + - description: + SolidRun Armada 385 based single-board computers. + items: + - enum: + - solidrun,clearfog-gtr-l8 + - solidrun,clearfog-gtr-s4 + - const: marvell,armada385 + - const: marvell,armada380 + + - description: + Kobol Armada 388 based Helios-4 NAS. + items: + - const: kobol,helios4 + - const: marvell,armada388 + - const: marvell,armada385 + - const: marvell,armada380 + + - description: + Marvell Armada 388 Development Boards. + items: + - enum: + - marvell,a388-gp + - const: marvell,armada388 + - const: marvell,armada385 + - const: marvell,armada380 + + - description: + SolidRun Armada 388 clearfog family single-board computers. + items: + - enum: + - solidrun,clearfog-base-a1 + - solidrun,clearfog-pro-a1 + - const: solidrun,clearfog-a1 + - const: marvell,armada388 + - const: marvell,armada385 + - const: marvell,armada380 + +additionalProperties: true diff --git a/dts/Bindings/arm/mediatek.yaml b/dts/Bindings/arm/mediatek.yaml index 6f2f64ae76..09f9ffd3ff 100644 --- a/dts/Bindings/arm/mediatek.yaml +++ b/dts/Bindings/arm/mediatek.yaml @@ -17,6 +17,7 @@ properties: const: '/' compatible: oneOf: + # Sort by SoC (last) compatible, then board compatible - items: - enum: - mediatek,mt2701-evb @@ -84,6 +85,11 @@ properties: - const: mediatek,mt7629 - items: - enum: + - xiaomi,ax3000t + - const: mediatek,mt7981b + - items: + - enum: + - acelink,ew-7886cax - bananapi,bpi-r3 - mediatek,mt7986a-rfb - const: mediatek,mt7986a @@ -93,6 +99,10 @@ properties: - const: mediatek,mt7986b - items: - enum: + - bananapi,bpi-r4 + - const: mediatek,mt7988a + - items: + - enum: - mediatek,mt8127-moose - const: mediatek,mt8127 - items: @@ -129,75 +139,10 @@ properties: - enum: - mediatek,mt8173-evb - const: mediatek,mt8173 - - items: - - enum: - - mediatek,mt8183-evb - - const: mediatek,mt8183 - - description: Google Hayato rev5 - items: - - const: google,hayato-rev5-sku2 - - const: google,hayato-sku2 - - const: google,hayato - - const: mediatek,mt8192 - - description: Google Hayato - items: - - const: google,hayato-rev1 - - const: google,hayato - - const: mediatek,mt8192 - - description: Google Spherion rev4 (Acer Chromebook 514) - items: - - const: google,spherion-rev4 - - const: google,spherion - - const: mediatek,mt8192 - - description: Google Spherion (Acer Chromebook 514) - items: - - const: google,spherion-rev3 - - const: google,spherion-rev2 - - const: google,spherion-rev1 - - const: google,spherion-rev0 - - const: google,spherion - - const: mediatek,mt8192 - - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H) - items: - - enum: - - google,tomato-rev2 - - google,tomato-rev1 - - const: google,tomato - - const: mediatek,mt8195 - - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H) - items: - - const: google,tomato-rev4 - - const: google,tomato-rev3 - - const: google,tomato - - const: mediatek,mt8195 - - items: - - enum: - - mediatek,mt8186-evb - - const: mediatek,mt8186 - - items: - - enum: - - mediatek,mt8188-evb - - const: mediatek,mt8188 - - items: - - enum: - - mediatek,mt8192-evb - - const: mediatek,mt8192 - - items: - - enum: - - mediatek,mt8195-demo - - mediatek,mt8195-evb - - const: mediatek,mt8195 - description: Google Burnet (HP Chromebook x360 11MK G3 EE) items: - const: google,burnet - const: mediatek,mt8183 - - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) - items: - - enum: - - google,krane-sku0 - - google,krane-sku176 - - const: google,krane - - const: mediatek,mt8183 - description: Google Cozmo (Acer Chromebook 314) items: - const: google,cozmo @@ -255,6 +200,13 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) + items: + - enum: + - google,krane-sku0 + - google,krane-sku176 + - const: google,krane + - const: mediatek,mt8183 - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2) items: - enum: @@ -278,8 +230,123 @@ properties: - const: mediatek,mt8183 - items: - enum: + - mediatek,mt8183-evb + - const: mediatek,mt8183 + - items: + - enum: - mediatek,mt8183-pumpkin - const: mediatek,mt8183 + - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868)) + items: + - const: google,steelix-sku393219 + - const: google,steelix-sku393216 + - const: google,steelix + - const: mediatek,mt8186 + - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868)) + items: + - const: google,steelix-sku393220 + - const: google,steelix-sku393217 + - const: google,steelix + - const: mediatek,mt8186 + - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868)) + items: + - const: google,steelix-sku393221 + - const: google,steelix-sku393218 + - const: google,steelix + - const: mediatek,mt8186 + - description: Google Rusty (Lenovo 100e Chromebook Gen 4) + items: + - const: google,steelix-sku196609 + - const: google,steelix-sku196608 + - const: google,steelix + - const: mediatek,mt8186 + - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4) + items: + - enum: + - google,steelix-sku131072 + - google,steelix-sku131073 + - const: google,steelix + - const: mediatek,mt8186 + - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F) + items: + - const: google,tentacruel-sku262147 + - const: google,tentacruel-sku262146 + - const: google,tentacruel-sku262145 + - const: google,tentacruel-sku262144 + - const: google,tentacruel + - const: mediatek,mt8186 + - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F) + items: + - const: google,tentacruel-sku262151 + - const: google,tentacruel-sku262150 + - const: google,tentacruel-sku262149 + - const: google,tentacruel-sku262148 + - const: google,tentacruel + - const: mediatek,mt8186 + - description: Google Tentacool (ASUS Chromebook CM14 CM1402C) + items: + - const: google,tentacruel-sku327681 + - const: google,tentacruel + - const: mediatek,mt8186 + - description: Google Tentacool (ASUS Chromebook CM14 CM1402C) + items: + - const: google,tentacruel-sku327683 + - const: google,tentacruel + - const: mediatek,mt8186 + - items: + - enum: + - mediatek,mt8186-evb + - const: mediatek,mt8186 + - items: + - enum: + - mediatek,mt8188-evb + - const: mediatek,mt8188 + - description: Google Hayato + items: + - const: google,hayato-rev1 + - const: google,hayato + - const: mediatek,mt8192 + - description: Google Hayato rev5 + items: + - const: google,hayato-rev5-sku2 + - const: google,hayato-sku2 + - const: google,hayato + - const: mediatek,mt8192 + - description: Google Spherion (Acer Chromebook 514) + items: + - const: google,spherion-rev3 + - const: google,spherion-rev2 + - const: google,spherion-rev1 + - const: google,spherion-rev0 + - const: google,spherion + - const: mediatek,mt8192 + - description: Google Spherion rev4 (Acer Chromebook 514) + items: + - const: google,spherion-rev4 + - const: google,spherion + - const: mediatek,mt8192 + - items: + - enum: + - mediatek,mt8192-evb + - const: mediatek,mt8192 + - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H) + items: + - enum: + - google,tomato-rev2 + - google,tomato-rev1 + - const: google,tomato + - const: mediatek,mt8195 + - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H) + items: + - const: google,tomato-rev4 + - const: google,tomato-rev3 + - const: google,tomato + - const: mediatek,mt8195 + - items: + - enum: + - mediatek,mt8195-demo + - mediatek,mt8195-evb + - const: mediatek,mt8195 - items: - enum: - mediatek,mt8365-evk @@ -287,6 +354,7 @@ properties: - items: - enum: - mediatek,mt8395-evk + - radxa,nio-12l - const: mediatek,mt8395 - const: mediatek,mt8195 - items: diff --git a/dts/Bindings/arm/mediatek/mediatek,hifsys.txt b/dts/Bindings/arm/mediatek/mediatek,hifsys.txt deleted file mode 100644 index 323905af82..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,hifsys.txt +++ /dev/null @@ -1,26 +0,0 @@ -Mediatek hifsys controller -============================ - -The Mediatek hifsys controller provides various clocks and reset -outputs to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt2701-hifsys", "syscon" - - "mediatek,mt7622-hifsys", "syscon" - - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon" -- #clock-cells: Must be 1 - -The hifsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -hifsys: clock-controller@1a000000 { - compatible = "mediatek,mt2701-hifsys", "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/dts/Bindings/arm/mediatek/mediatek,pciesys.txt b/dts/Bindings/arm/mediatek/mediatek,pciesys.txt deleted file mode 100644 index d179a61536..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,pciesys.txt +++ /dev/null @@ -1,25 +0,0 @@ -MediaTek PCIESYS controller -============================ - -The MediaTek PCIESYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt7622-pciesys", "syscon" - - "mediatek,mt7629-pciesys", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The PCIESYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -pciesys: pciesys@1a100800 { - compatible = "mediatek,mt7622-pciesys", "syscon"; - reg = <0 0x1a100800 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/dts/Bindings/arm/mediatek/mediatek,ssusbsys.txt b/dts/Bindings/arm/mediatek/mediatek,ssusbsys.txt deleted file mode 100644 index 7cb02c9306..0000000000 --- a/dts/Bindings/arm/mediatek/mediatek,ssusbsys.txt +++ /dev/null @@ -1,25 +0,0 @@ -MediaTek SSUSBSYS controller -============================ - -The MediaTek SSUSBSYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt7622-ssusbsys", "syscon" - - "mediatek,mt7629-ssusbsys", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The SSUSBSYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -ssusbsys: ssusbsys@1a000000 { - compatible = "mediatek,mt7622-ssusbsys", "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/dts/Bindings/arm/msm/qcom,saw2.txt b/dts/Bindings/arm/msm/qcom,saw2.txt deleted file mode 100644 index c0e3c3a42b..0000000000 --- a/dts/Bindings/arm/msm/qcom,saw2.txt +++ /dev/null @@ -1,58 +0,0 @@ -SPM AVS Wrapper 2 (SAW2) - -The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the -Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable -power-controller that transitions a piece of hardware (like a processor or -subsystem) into and out of low power modes via a direct connection to -the PMIC. It can also be wired up to interact with other processors in the -system, notifying them when a low power state is entered or exited. - -Multiple revisions of the SAW hardware are supported using these Device Nodes. -SAW2 revisions differ in the register offset and configuration data. Also, the -same revision of the SAW in different SoCs may have different configuration -data due the differences in hardware capabilities. Hence the SoC name, the -version of the SAW hardware in that SoC and the distinction between cpu (big -or Little) or cache, may be needed to uniquely identify the SAW register -configuration and initialization data. The compatible string is used to -indicate this parameter. - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Must have - "qcom,saw2" - A more specific value could be one of: - "qcom,apq8064-saw2-v1.1-cpu" - "qcom,msm8226-saw2-v2.1-cpu" - "qcom,msm8974-saw2-v2.1-cpu" - "qcom,apq8084-saw2-v2.1-cpu" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the first element specifies the base address and size of - the register region. An optional second element specifies - the base address and size of the alias register region. - -- regulator: - Usage: optional - Value type: boolean - Definition: Indicates that this SPM device acts as a regulator device - device for the core (CPU or Cache) the SPM is attached - to. - -Example 1: - - power-controller@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - -Example 2: - saw0: power-controller@f9089000 { - compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; - }; diff --git a/dts/Bindings/arm/qcom,coresight-tpdm.yaml b/dts/Bindings/arm/qcom,coresight-tpdm.yaml index 61ddc3b5b2..8eec07d9d4 100644 --- a/dts/Bindings/arm/qcom,coresight-tpdm.yaml +++ b/dts/Bindings/arm/qcom,coresight-tpdm.yaml @@ -44,14 +44,21 @@ properties: minItems: 1 maxItems: 2 - qcom,dsb-element-size: + qcom,dsb-element-bits: description: Specifies the DSB(Discrete Single Bit) element size supported by the monitor. The associated aggregator will read this size before it is enabled. DSB element size currently only supports 32-bit and 64-bit. - $ref: /schemas/types.yaml#/definitions/uint8 enum: [32, 64] + qcom,cmb-element-bits: + description: + Specifies the CMB(Continuous Multi-Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. CMB element size currently only supports 8-bit, 32-bit + and 64-bit. + enum: [8, 32, 64] + qcom,dsb-msrs-num: description: Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) @@ -61,6 +68,15 @@ properties: minimum: 0 maximum: 32 + qcom,cmb-msrs-num: + description: + Specifies the number of CMB MSR(mux select register) registers supported + by the monitor. If this property is not configured or set to 0, it means + this TPDM doesn't support CMB MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -94,7 +110,7 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; - qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-element-bits = <32>; qcom,dsb-msrs-num = <16>; clocks = <&aoss_qmp>; @@ -110,4 +126,22 @@ examples: }; }; + tpdm@6c29000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x06c29000 0x1000>; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_out_funnel_center: endpoint { + remote-endpoint = <&funnel_center_in_tpdm_ipcc>; + }; + }; + }; + }; ... diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml index 1a5fb889a4..66beaac60e 100644 --- a/dts/Bindings/arm/qcom.yaml +++ b/dts/Bindings/arm/qcom.yaml @@ -10,17 +10,10 @@ maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> description: | - Some qcom based bootloaders identify the dtb blob based on a set of - device properties like SoC and platform and revisions of those components. - To support this scheme, we encode this information into the board compatible - string. - - Each board must specify a top-level board compatible string with the following - format: - - compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" - - The 'SoC' and 'board' elements are required. All other elements are optional. + For devices using the Qualcomm SoC the "compatible" properties consists of + one or several "manufacturer,model" strings, describing the device itself, + followed by one or several "qcom,<SoC>" strings, describing the SoC used in + the device. The 'SoC' element must be one of the following strings: @@ -90,43 +83,9 @@ description: | sm8650 x1e80100 - The 'board' element must be one of the following strings: - - adp - cdp - dragonboard - idp - liquid - mtp - qcp - qrd - rb2 - ride - sbc - x100 - - The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> - where the minor number may be omitted when it's zero, i.e. v1.0 is the same - as v1. If all versions of the 'board_version' elements match, then a - wildcard '*' should be used, e.g. 'v*'. - - The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. - - Examples: - - "qcom,msm8916-v1-cdp-pm8916-v2.1" - - A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version - 2.1. - - "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" - - A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in - foundry 2. - There are many devices in the list below that run the standard ChromeOS bootloader setup and use the open source depthcharge bootloader to boot the - OS. These devices do not use the scheme described above. For details, see: + OS. These devices use the bootflow explained at https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html properties: @@ -187,6 +146,7 @@ properties: - microsoft,superman-lte - microsoft,tesla - motorola,peregrine + - samsung,matisselte - const: qcom,msm8926 - const: qcom,msm8226 @@ -244,11 +204,15 @@ properties: - samsung,a5u-eur - samsung,e5 - samsung,e7 + - samsung,fortuna3g + - samsung,gprimeltecan - samsung,grandmax + - samsung,grandprimelte - samsung,gt510 - samsung,gt58 - samsung,j5 - samsung,j5x + - samsung,rossa - samsung,serranove - thwc,uf896 - thwc,ufi001c @@ -988,6 +952,7 @@ properties: - items: - enum: + - xiaomi,curtana - xiaomi,joyeuse - const: qcom,sm7125 @@ -1035,6 +1000,7 @@ properties: - items: - enum: + - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd - const: qcom,sm8550 diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml index 5cf5cbef2c..fcf7316ecd 100644 --- a/dts/Bindings/arm/rockchip.yaml +++ b/dts/Bindings/arm/rockchip.yaml @@ -37,29 +37,16 @@ properties: - anbernic,rg351v - const: rockchip,rk3326 - - description: Anbernic RG353P + - description: Anbernic RK3566 Handheld Gaming Console items: - - const: anbernic,rg353p - - const: rockchip,rk3566 - - - description: Anbernic RG353PS - items: - - const: anbernic,rg353ps - - const: rockchip,rk3566 - - - description: Anbernic RG353V - items: - - const: anbernic,rg353v - - const: rockchip,rk3566 - - - description: Anbernic RG353VS - items: - - const: anbernic,rg353vs - - const: rockchip,rk3566 - - - description: Anbernic RG503 - items: - - const: anbernic,rg503 + - enum: + - anbernic,rg353p + - anbernic,rg353ps + - anbernic,rg353v + - anbernic,rg353vs + - anbernic,rg503 + - anbernic,rg-arc-d + - anbernic,rg-arc-s - const: rockchip,rk3566 - description: Asus Tinker board @@ -237,6 +224,13 @@ properties: - friendlyarm,nanopi-r5s - const: rockchip,rk3568 + - description: FriendlyElec NanoPi R6 series boards + items: + - enum: + - friendlyarm,nanopi-r6c + - friendlyarm,nanopi-r6s + - const: rockchip,rk3588s + - description: FriendlyElec NanoPC T6 items: - const: friendlyarm,nanopc-t6 @@ -626,9 +620,9 @@ properties: - const: openailab,eaidk-610 - const: rockchip,rk3399 - - description: Orange Pi RK3399 board + - description: Xunlong Orange Pi RK3399 board items: - - const: rockchip,rk3399-orangepi + - const: xunlong,rk3399-orangepi - const: rockchip,rk3399 - description: Phytec phyCORE-RK3288 Rapid Development Kit @@ -655,6 +649,14 @@ properties: - const: pine64,pinephone-pro - const: rockchip,rk3399 + - description: Pine64 PineTab2 + items: + - enum: + - pine64,pinetab2-v0.1 + - pine64,pinetab2-v2.0 + - const: pine64,pinetab2 + - const: rockchip,rk3566 + - description: Pine64 Rock64 items: - const: pine64,rock64 @@ -692,11 +694,17 @@ properties: - description: Powkiddy RK3566 Handheld Gaming Console items: - enum: + - powkiddy,rgb10max3 - powkiddy,rgb30 - powkiddy,rk2023 - powkiddy,x55 - const: rockchip,rk3566 + - description: QNAP TS-433-4G 4-Bay NAS + items: + - const: qnap,ts433 + - const: rockchip,rk3568 + - description: Radxa Compute Module 3(CM3) items: - enum: @@ -878,6 +886,11 @@ properties: - const: rockchip,rv1108-evb - const: rockchip,rv1108 + - description: Rockchip Toybrick TB-RK3588X board + items: + - const: rockchip,rk3588-toybrick-x0 + - const: rockchip,rk3588 + - description: Theobroma Systems PX30-uQ7 with Haikou baseboard items: - const: tsd,px30-ringneck-haikou @@ -898,6 +911,12 @@ properties: - const: tsd,rk3588-jaguar - const: rockchip,rk3588 + - description: Theobroma Systems RK3588-Q7 with Haikou baseboard + items: + - const: tsd,rk3588-tiger-haikou + - const: tsd,rk3588-tiger + - const: rockchip,rk3588 + - description: Tronsmart Orion R68 Meta items: - const: tronsmart,orion-r68-meta @@ -940,9 +959,9 @@ properties: - const: rockchip,rk3568-evb1-v10 - const: rockchip,rk3568 - - description: Rockchip RK3568 Banana Pi R2 Pro + - description: Sinovoip RK3568 Banana Pi R2 Pro items: - - const: rockchip,rk3568-bpi-r2pro + - const: sinovoip,rk3568-bpi-r2pro - const: rockchip,rk3568 - description: Sonoff iHost Smart Home Hub diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml index a9d8e85565..09d835db6d 100644 --- a/dts/Bindings/arm/sunxi.yaml +++ b/dts/Bindings/arm/sunxi.yaml @@ -815,6 +815,12 @@ properties: - const: allwinner,r7-tv-dongle - const: allwinner,sun5i-a10s + - description: Remix Mini PC + items: + - const: jide,remix-mini-pc + - const: allwinner,sun50i-h64 + - const: allwinner,sun50i-a64 + - description: RerVision H3-DVK items: - const: rervision,h3-dvk @@ -835,6 +841,12 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: Sipeed Longan Pi 3H board for the Sipeed Longan Module 3H + items: + - const: sipeed,longan-pi-3h + - const: sipeed,longan-module-3h + - const: allwinner,sun50i-h618 + - description: SourceParts PopStick v1.1 items: - const: sourceparts,popstick-v1.1 diff --git a/dts/Bindings/arm/syna.txt b/dts/Bindings/arm/syna.txt index 851f48ead9..f53c430f64 100644 --- a/dts/Bindings/arm/syna.txt +++ b/dts/Bindings/arm/syna.txt @@ -6,18 +6,6 @@ berlin SoCs are now Synaptics' SoCs now. --------------------------------------------------------------- -Work in progress statement: - -Device tree files and bindings applying to Marvell Berlin SoCs and boards are -considered "unstable". Any Marvell Berlin device tree binding may change at any -time. Be sure to use a device tree binary and a kernel image generated from the -same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/dts/Bindings/arm/tegra.yaml b/dts/Bindings/arm/tegra.yaml index fcf9564061..8fb4923517 100644 --- a/dts/Bindings/arm/tegra.yaml +++ b/dts/Bindings/arm/tegra.yaml @@ -64,6 +64,14 @@ properties: - items: - const: asus,tf700t - const: nvidia,tegra30 + - description: LG Optimus 4X P880 + items: + - const: lg,p880 + - const: nvidia,tegra30 + - description: LG Optimus Vu P895 + items: + - const: lg,p895 + - const: nvidia,tegra30 - items: - const: toradex,apalis_t30-eval - const: toradex,apalis_t30 diff --git a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml index 0faa403f68..ea4fbf6552 100644 --- a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml +++ b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -27,7 +27,7 @@ properties: - const: pmc - const: wake - const: aotag - - const: scratch + - enum: [ scratch, misc ] - const: misc interrupt-controller: true @@ -41,25 +41,43 @@ properties: description: If present, inverts the PMU interrupt signal. $ref: /schemas/types.yaml#/definitions/flag -if: - properties: - compatible: - contains: - const: nvidia,tegra186-pmc -then: - properties: - reg: - maxItems: 4 - - reg-names: - maxItems: 4 -else: - properties: - reg: - minItems: 5 - - reg-names: - minItems: 5 +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-pmc + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + contains: + const: scratch + + - if: + properties: + compatible: + contains: + const: nvidia,tegra194-pmc + then: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 + + - if: + properties: + compatible: + contains: + const: nvidia,tegra234-pmc + then: + properties: + reg-names: + contains: + const: misc patternProperties: "^[a-z0-9]+-[a-z0-9]+$": diff --git a/dts/Bindings/arm/ti/k3.yaml b/dts/Bindings/arm/ti/k3.yaml index c6506bccfe..52b51fd704 100644 --- a/dts/Bindings/arm/ti/k3.yaml +++ b/dts/Bindings/arm/ti/k3.yaml @@ -87,12 +87,20 @@ properties: - const: tq,am642-tqma6442l - const: ti,am642 + - description: K3 AM642 SoC SolidRun SoM based boards + items: + - enum: + - solidrun,am642-hummingboard-t + - const: solidrun,am642-sr-som + - const: ti,am642 + - description: K3 AM654 SoC items: - enum: - siemens,iot2050-advanced - siemens,iot2050-advanced-m2 - siemens,iot2050-advanced-pg2 + - siemens,iot2050-advanced-sm - siemens,iot2050-basic - siemens,iot2050-basic-pg2 - ti,am654-evm @@ -123,6 +131,12 @@ properties: - ti,j721s2-evm - const: ti,j721s2 + - description: K3 J722S SoC and Boards + items: + - enum: + - ti,j722s-evm + - const: ti,j722s + - description: K3 J784s4 SoC items: - enum: diff --git a/dts/Bindings/ata/ahci-mtk.txt b/dts/Bindings/ata/ahci-mtk.txt deleted file mode 100644 index d2aa696b16..0000000000 --- a/dts/Bindings/ata/ahci-mtk.txt +++ /dev/null @@ -1,51 +0,0 @@ -MediaTek Serial ATA controller - -Required properties: - - compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci". - When using "mediatek,mtk-ahci" compatible strings, you - need SoC specific ones in addition, one of: - - "mediatek,mt7622-ahci" - - reg : Physical base addresses and length of register sets. - - interrupts : Interrupt associated with the SATA device. - - interrupt-names : Associated name must be: "hostc". - - clocks : A list of phandle and clock specifier pairs, one for each - entry in clock-names. - - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm". - - phys : A phandle and PHY specifier pair for the PHY port. - - phy-names : Associated name must be: "sata-phy". - - ports-implemented : See ./ahci-platform.txt for details. - -Optional properties: - - power-domains : A phandle and power domain specifier pair to the power - domain which is responsible for collapsing and restoring - power to the peripheral. - - resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names : Associated names must be: "axi", "sw", "reg". - - mediatek,phy-mode : A phandle to the system controller, used to enable - SATA function. - -Example: - - sata: sata@1a200000 { - compatible = "mediatek,mt7622-ahci", - "mediatek,mtk-ahci"; - reg = <0 0x1a200000 0 0x1100>; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hostc"; - clocks = <&pciesys CLK_SATA_AHB_EN>, - <&pciesys CLK_SATA_AXI_EN>, - <&pciesys CLK_SATA_ASIC_EN>, - <&pciesys CLK_SATA_RBC_EN>, - <&pciesys CLK_SATA_PM_EN>; - clock-names = "ahb", "axi", "asic", "rbc", "pm"; - phys = <&u3port1 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, - <&pciesys MT7622_SATA_PHY_SW_RST>, - <&pciesys MT7622_SATA_PHY_REG_RST>; - reset-names = "axi", "sw", "reg"; - mediatek,phy-mode = <&pciesys>; - }; diff --git a/dts/Bindings/ata/atmel-at91_cf.txt b/dts/Bindings/ata/atmel-at91_cf.txt deleted file mode 100644 index c1d22b3ae1..0000000000 --- a/dts/Bindings/ata/atmel-at91_cf.txt +++ /dev/null @@ -1,19 +0,0 @@ -Atmel AT91RM9200 CompactFlash - -Required properties: -- compatible : "atmel,at91rm9200-cf". -- reg : should specify localbus address and size used. -- gpios : specifies the gpio pins to control the CF device. Detect - and reset gpio's are mandatory while irq and vcc gpio's are - optional and may be set to 0 if not present. - -Example: -compact-flash@50000000 { - compatible = "atmel,at91rm9200-cf"; - reg = <0x50000000 0x30000000>; - gpios = <&pioC 13 0 /* irq */ - &pioC 15 0 /* detect */ - 0 /* vcc */ - &pioC 5 0 /* reset */ - >; -}; diff --git a/dts/Bindings/ata/mediatek,mtk-ahci.yaml b/dts/Bindings/ata/mediatek,mtk-ahci.yaml new file mode 100644 index 0000000000..a34bd2e9c3 --- /dev/null +++ b/dts/Bindings/ata/mediatek,mtk-ahci.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Serial ATA controller + +maintainers: + - Ryder Lee <ryder.lee@mediatek.com> + +allOf: + - $ref: ahci-common.yaml# + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-ahci + - const: mediatek,mtk-ahci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: hostc + + clocks: + maxItems: 5 + + clock-names: + items: + - const: ahb + - const: axi + - const: asic + - const: rbc + - const: pm + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: axi + - const: sw + - const: reg + + mediatek,phy-mode: + description: System controller phandle, used to enable SATA function + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phys + - phy-names + - ports-implemented + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt7622-power.h> + #include <dt-bindings/reset/mt7622-reset.h> + + sata@1a200000 { + compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci"; + reg = <0x1a200000 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&u3port1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + }; diff --git a/dts/Bindings/auxdisplay/arm,versatile-lcd.yaml b/dts/Bindings/auxdisplay/arm,versatile-lcd.yaml index 5d02bd032a..439f7b811a 100644 --- a/dts/Bindings/auxdisplay/arm,versatile-lcd.yaml +++ b/dts/Bindings/auxdisplay/arm,versatile-lcd.yaml @@ -39,6 +39,6 @@ additionalProperties: false examples: - | lcd@10008000 { - compatible = "arm,versatile-lcd"; - reg = <0x10008000 0x1000>; + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; }; diff --git a/dts/Bindings/auxdisplay/gpio-7-segment.yaml b/dts/Bindings/auxdisplay/gpio-7-segment.yaml new file mode 100644 index 0000000000..328954893c --- /dev/null +++ b/dts/Bindings/auxdisplay/gpio-7-segment.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO based LED segment display + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: gpio-7-segment + + segment-gpios: + description: | + An array of GPIOs one per segment. The first GPIO corresponds to the A + segment, the seventh GPIO corresponds to the G segment. Some LED blocks + also have a decimal point which can be specified as an optional eighth + segment. + + -a- + | | + f b + | | + -g- + | | + e c + | | + -d- dp + + minItems: 7 + maxItems: 8 + +required: + - segment-gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_LOW>, + <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/auxdisplay/hit,hd44780.yaml b/dts/Bindings/auxdisplay/hit,hd44780.yaml index 406a922a71..3ca0e9863d 100644 --- a/dts/Bindings/auxdisplay/hit,hd44780.yaml +++ b/dts/Bindings/auxdisplay/hit,hd44780.yaml @@ -84,42 +84,44 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - auxdisplay { - compatible = "hit,hd44780"; - - data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, - <&hc595 1 GPIO_ACTIVE_HIGH>, - <&hc595 2 GPIO_ACTIVE_HIGH>, - <&hc595 3 GPIO_ACTIVE_HIGH>; - enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - - display-height-chars = <2>; - display-width-chars = <16>; + display-controller { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; }; + - | #include <dt-bindings/gpio/gpio.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - pcf8574: pcf8574@27 { - compatible = "nxp,pcf8574"; - reg = <0x27>; - gpio-controller; - #gpio-cells = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; + + pcf8574: gpio-expander@27 { + compatible = "nxp,pcf8574"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; }; - hd44780 { - compatible = "hit,hd44780"; - display-height-chars = <2>; - display-width-chars = <16>; - data-gpios = <&pcf8574 4 0>, - <&pcf8574 5 0>, - <&pcf8574 6 0>, - <&pcf8574 7 0>; - enable-gpios = <&pcf8574 2 0>; - rs-gpios = <&pcf8574 0 0>; - rw-gpios = <&pcf8574 1 0>; - backlight-gpios = <&pcf8574 3 0>; + + display-controller { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <16>; + data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>, + <&pcf8574 5 GPIO_ACTIVE_HIGH>, + <&pcf8574 6 GPIO_ACTIVE_HIGH>, + <&pcf8574 7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>; + rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>; + rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/Bindings/auxdisplay/holtek,ht16k33.yaml b/dts/Bindings/auxdisplay/holtek,ht16k33.yaml index be95f6b97b..b90eec2077 100644 --- a/dts/Bindings/auxdisplay/holtek,ht16k33.yaml +++ b/dts/Bindings/auxdisplay/holtek,ht16k33.yaml @@ -74,31 +74,31 @@ examples: #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - ht16k33: ht16k33@70 { - compatible = "holtek,ht16k33"; - reg = <0x70>; - refresh-rate-hz = <20>; - interrupt-parent = <&gpio4>; - interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; - debounce-delay-ms = <50>; - linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, - <MATRIX_KEY(3, 0, KEY_F8)>, - <MATRIX_KEY(4, 0, KEY_F10)>, - <MATRIX_KEY(5, 0, KEY_F4)>, - <MATRIX_KEY(6, 0, KEY_F2)>, - <MATRIX_KEY(2, 1, KEY_F5)>, - <MATRIX_KEY(3, 1, KEY_F7)>, - <MATRIX_KEY(4, 1, KEY_F9)>, - <MATRIX_KEY(5, 1, KEY_F3)>, - <MATRIX_KEY(6, 1, KEY_F1)>; - - led { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_BACKLIGHT; - linux,default-trigger = "backlight"; - }; + #address-cells = <1>; + #size-cells = <0>; + + display-controller@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + debounce-delay-ms = <50>; + linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, + <MATRIX_KEY(3, 0, KEY_F8)>, + <MATRIX_KEY(4, 0, KEY_F10)>, + <MATRIX_KEY(5, 0, KEY_F4)>, + <MATRIX_KEY(6, 0, KEY_F2)>, + <MATRIX_KEY(2, 1, KEY_F5)>, + <MATRIX_KEY(3, 1, KEY_F7)>, + <MATRIX_KEY(4, 1, KEY_F9)>, + <MATRIX_KEY(5, 1, KEY_F3)>, + <MATRIX_KEY(6, 1, KEY_F1)>; + + led { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_BACKLIGHT; + linux,default-trigger = "backlight"; }; - }; + }; + }; diff --git a/dts/Bindings/auxdisplay/img,ascii-lcd.yaml b/dts/Bindings/auxdisplay/img,ascii-lcd.yaml index 1899b23de7..55e9831b3f 100644 --- a/dts/Bindings/auxdisplay/img,ascii-lcd.yaml +++ b/dts/Bindings/auxdisplay/img,ascii-lcd.yaml @@ -50,6 +50,6 @@ additionalProperties: false examples: - | lcd: lcd@17fff000 { - compatible = "img,boston-lcd"; - reg = <0x17fff000 0x8>; + compatible = "img,boston-lcd"; + reg = <0x17fff000 0x8>; }; diff --git a/dts/Bindings/auxdisplay/maxim,max6959.yaml b/dts/Bindings/auxdisplay/maxim,max6959.yaml new file mode 100644 index 0000000000..20dd9e8c81 --- /dev/null +++ b/dts/Bindings/auxdisplay/maxim,max6959.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX6958/6959 7-segment LED display controller + +maintainers: + - Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +description: + The Maxim MAX6958/6959 7-segment LED display controller provides + an I2C interface to up to four 7-segment LED digits. The MAX6959, + in comparison to MAX6958, adds input support. Type of the chip can + be autodetected via specific register read, and hence the features + may be enabled in the driver at run-time, in case they are requested + via Device Tree. A given hardware is simple and does not provide + any additional pins, such as reset or power enable. + +properties: + compatible: + const: maxim,max6959 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + display-controller@38 { + compatible = "maxim,max6959"; + reg = <0x38>; + }; + }; diff --git a/dts/Bindings/bus/brcm,gisb-arb.yaml b/dts/Bindings/bus/brcm,gisb-arb.yaml index 3aaefdbe36..9017c5a3f3 100644 --- a/dts/Bindings/bus/brcm,gisb-arb.yaml +++ b/dts/Bindings/bus/brcm,gisb-arb.yaml @@ -18,6 +18,7 @@ properties: - const: brcm,gisb-arb - items: - enum: + - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips - brcm,bcm7278-gisb-arb # for V7 28nm chips - brcm,bcm7435-gisb-arb # for newer 40nm chips - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips diff --git a/dts/Bindings/bus/imx-weim.txt b/dts/Bindings/bus/imx-weim.txt deleted file mode 100644 index e7f502070d..0000000000 --- a/dts/Bindings/bus/imx-weim.txt +++ /dev/null @@ -1,117 +0,0 @@ -Device tree bindings for i.MX Wireless External Interface Module (WEIM) - -The term "wireless" does not imply that the WEIM is literally an interface -without wires. It simply means that this module was originally designed for -wireless and mobile applications that use low-power technology. - -The actual devices are instantiated from the child nodes of a WEIM node. - -Required properties: - - - compatible: Should contain one of the following: - "fsl,imx1-weim" - "fsl,imx27-weim" - "fsl,imx51-weim" - "fsl,imx50-weim" - "fsl,imx6q-weim" - - reg: A resource specifier for the register space - (see the example below) - - clocks: the clock, see the example below. - - #address-cells: Must be set to 2 to allow memory address translation - - #size-cells: Must be set to 1 to allow CS address passing - - ranges: Must be set up to reflect the memory layout with four - integer values for each chip-select line in use: - - <cs-number> 0 <physical address of mapping> <size> - -Optional properties: - - - fsl,weim-cs-gpr: For "fsl,imx50-weim" and "fsl,imx6q-weim" type of - devices, it should be the phandle to the system General - Purpose Register controller that contains WEIM CS GPR - register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0] - should be set up as one of the following 4 possible - values depending on the CS space configuration. - - IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3 - --------------------------------------------- - 05 128M 0M 0M 0M - 033 64M 64M 0M 0M - 0113 64M 32M 32M 0M - 01111 32M 32M 32M 32M - - In case that the property is absent, the reset value or - what bootloader sets up in IOMUXC_GPR1[11:0] will be - used. - - - fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of - devices, the presence of this property indicates that - the weim bus should operate in Burst Clock Mode. - - - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. - Without this option Burst Clock will output clock - only when necessary. This takes effect only if - "fsl,burst-clk-enable" is set. - -Timing property for child nodes. It is mandatory, not optional. - - - fsl,weim-cs-timing: The timing array, contains timing values for the - child node. We get the CS indexes from the address - ranges in the child node's "reg" property. - The number of registers depends on the selected chip: - For i.MX1, i.MX21 ("fsl,imx1-weim") there are two - registers: CSxU, CSxL. - For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim") - there are three registers: CSCRxU, CSCRxL, CSCRxA. - For i.MX50, i.MX53 ("fsl,imx50-weim"), - i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim") - there are six registers: CSxGCR1, CSxGCR2, CSxRCR1, - CSxRCR2, CSxWCR1, CSxWCR2. - -Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: - - weim: weim@21b8000 { - compatible = "fsl,imx6q-weim"; - reg = <0x021b8000 0x4000>; - clocks = <&clks 196>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x08000000>; - fsl,weim-cs-gpr = <&gpr>; - - nor@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x02000000>; - #address-cells = <1>; - #size-cells = <1>; - bank-width = <2>; - fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 - 0x0000c000 0x1404a38e 0x00000000>; - }; - }; - -Example for an imx6q-based board, a multi-chipselect device connected to WEIM: - -In this case, both chip select 0 and 1 will be configured with the same timing -array values. - - weim: weim@21b8000 { - compatible = "fsl,imx6q-weim"; - reg = <0x021b8000 0x4000>; - clocks = <&clks 196>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x02000000 - 1 0 0x0a000000 0x02000000 - 2 0 0x0c000000 0x02000000 - 3 0 0x0e000000 0x02000000>; - fsl,weim-cs-gpr = <&gpr>; - - acme@0 { - compatible = "acme,whatever"; - reg = <0 0 0x100>, <0 0x400000 0x800>, - <1 0x400000 0x800>; - fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100 - 0x00000000 0xa0000240 0x00000000>; - }; - }; diff --git a/dts/Bindings/clock/google,gs101-clock.yaml b/dts/Bindings/clock/google,gs101-clock.yaml index ca7fdada3f..1d2bcea41c 100644 --- a/dts/Bindings/clock/google,gs101-clock.yaml +++ b/dts/Bindings/clock/google,gs101-clock.yaml @@ -30,14 +30,16 @@ properties: - google,gs101-cmu-top - google,gs101-cmu-apm - google,gs101-cmu-misc + - google,gs101-cmu-peric0 + - google,gs101-cmu-peric1 clocks: minItems: 1 - maxItems: 2 + maxItems: 3 clock-names: minItems: 1 - maxItems: 2 + maxItems: 3 "#clock-cells": const: 1 @@ -88,6 +90,28 @@ allOf: - const: bus - const: sss + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-peric0 + - google,gs101-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP) + - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: ip + additionalProperties: false examples: diff --git a/dts/Bindings/clock/keystone-gate.txt b/dts/Bindings/clock/keystone-gate.txt index c5aa187026..43f6fb6c93 100644 --- a/dts/Bindings/clock/keystone-gate.txt +++ b/dts/Bindings/clock/keystone-gate.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for Keystone gate control driver which uses PSC controller IP. This binding uses the common clock binding[1]. diff --git a/dts/Bindings/clock/keystone-pll.txt b/dts/Bindings/clock/keystone-pll.txt index 9a3fbc6656..69b0eb7c03 100644 --- a/dts/Bindings/clock/keystone-pll.txt +++ b/dts/Bindings/clock/keystone-pll.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for keystone PLLs. The main PLL IP typically has a multiplier, a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where as the Main diff --git a/dts/Bindings/clock/mediatek,mt2701-hifsys.yaml b/dts/Bindings/clock/mediatek,mt2701-hifsys.yaml new file mode 100644 index 0000000000..9e7c725093 --- /dev/null +++ b/dts/Bindings/clock/mediatek,mt2701-hifsys.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek HIFSYS clock and reset controller + +description: + The MediaTek HIFSYS controller provides various clocks and reset outputs to + the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-hifsys + - mediatek,mt7622-hifsys + - items: + - enum: + - mediatek,mt7623-hifsys + - const: mediatek,mt2701-hifsys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a000000 { + compatible = "mediatek,mt2701-hifsys"; + reg = <0x1a000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/mediatek,mt7622-pciesys.yaml b/dts/Bindings/clock/mediatek,mt7622-pciesys.yaml new file mode 100644 index 0000000000..c77111d10f --- /dev/null +++ b/dts/Bindings/clock/mediatek,mt7622-pciesys.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIESYS clock and reset controller + +description: + The MediaTek PCIESYS controller provides various clocks to the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt7622-pciesys + - mediatek,mt7629-pciesys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a100800 { + compatible = "mediatek,mt7622-pciesys"; + reg = <0x1a100800 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/mediatek,mt7622-ssusbsys.yaml b/dts/Bindings/clock/mediatek,mt7622-ssusbsys.yaml new file mode 100644 index 0000000000..da93eccdcf --- /dev/null +++ b/dts/Bindings/clock/mediatek,mt7622-ssusbsys.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SSUSBSYS clock and reset controller + +description: + The MediaTek SSUSBSYS controller provides various clocks to the system. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt7622-ssusbsys + - mediatek,mt7629-ssusbsys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + description: The available clocks are defined in dt-bindings/clock/mt*-clk.h + + "#reset-cells": + const: 1 + +required: + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1a000000 { + compatible = "mediatek,mt7622-ssusbsys"; + reg = <0x1a000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/mobileye,eyeq5-clk.yaml b/dts/Bindings/clock/mobileye,eyeq5-clk.yaml new file mode 100644 index 0000000000..2d4f2cde1e --- /dev/null +++ b/dts/Bindings/clock/mobileye,eyeq5-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 clock controller + +description: + The EyeQ5 clock controller handles 10 read-only PLLs derived from the main + crystal clock. It also exposes one divider clock, a child of one of the PLLs. + Its registers live in a shared region called OLB. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +properties: + compatible: + const: mobileye,eyeq5-clk + + reg: + maxItems: 2 + + reg-names: + items: + - const: plls + - const: ospi + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + description: + Input parent clock to all PLLs. Expected to be the main crystal. + + clock-names: + items: + - const: ref + +required: + - compatible + - reg + - reg-names + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false diff --git a/dts/Bindings/clock/qcom,gcc-sc8180x.yaml b/dts/Bindings/clock/qcom,gcc-sc8180x.yaml index 6c4846b34e..a1085ef4fd 100644 --- a/dts/Bindings/clock/qcom,gcc-sc8180x.yaml +++ b/dts/Bindings/clock/qcom,gcc-sc8180x.yaml @@ -31,10 +31,15 @@ properties: - const: bi_tcxo_ao - const: sleep_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks - clock-names + - power-domains allOf: - $ref: qcom,gcc.yaml# @@ -44,6 +49,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@100000 { compatible = "qcom,gcc-sc8180x"; reg = <0x00100000 0x1f0000>; @@ -51,6 +57,7 @@ examples: <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8180X_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/dts/Bindings/clock/qcom,gpucc.yaml b/dts/Bindings/clock/qcom,gpucc.yaml index f369fa34e0..f57aceddac 100644 --- a/dts/Bindings/clock/qcom,gpucc.yaml +++ b/dts/Bindings/clock/qcom,gpucc.yaml @@ -53,6 +53,9 @@ properties: power-domains: maxItems: 1 + vdd-gfx-supply: + description: Regulator supply for the VDD_GFX pads + '#clock-cells': const: 1 @@ -74,6 +77,12 @@ required: - '#reset-cells' - '#power-domain-cells' +# Require that power-domains and vdd-gfx-supply are not both present +not: + required: + - power-domains + - vdd-gfx-supply + additionalProperties: false examples: diff --git a/dts/Bindings/clock/qcom,q6sstopcc.yaml b/dts/Bindings/clock/qcom,q6sstopcc.yaml index 03fa30fe92..e0f4d69272 100644 --- a/dts/Bindings/clock/qcom,q6sstopcc.yaml +++ b/dts/Bindings/clock/qcom,q6sstopcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Q6SSTOP clock Controller maintainers: - - Govind Singh <govinds@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> properties: compatible: diff --git a/dts/Bindings/clock/qcom,sc7180-mss.yaml b/dts/Bindings/clock/qcom,sc7180-mss.yaml deleted file mode 100644 index 873a2f918b..0000000000 --- a/dts/Bindings/clock/qcom,sc7180-mss.yaml +++ /dev/null @@ -1,61 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Modem Clock Controller on SC7180 - -maintainers: - - Taniya Das <quic_tdas@quicinc.com> - -description: | - Qualcomm modem clock control module provides the clocks on SC7180. - - See also:: include/dt-bindings/clock/qcom,mss-sc7180.h - -properties: - compatible: - const: qcom,sc7180-mss - - clocks: - items: - - description: gcc_mss_mfab_axi clock from GCC - - description: gcc_mss_nav_axi clock from GCC - - description: gcc_mss_cfg_ahb clock from GCC - - clock-names: - items: - - const: gcc_mss_mfab_axis - - const: gcc_mss_nav_axi - - const: cfg_ahb - - '#clock-cells': - const: 1 - - reg: - maxItems: 1 - -required: - - compatible - - reg - - clocks - - '#clock-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - clock-controller@41a8000 { - compatible = "qcom,sc7180-mss"; - reg = <0x041a8000 0x8000>; - clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>; - clock-names = "gcc_mss_mfab_axis", - "gcc_mss_nav_axi", - "cfg_ahb"; - #clock-cells = <1>; - }; -... diff --git a/dts/Bindings/clock/qcom,sm8450-camcc.yaml b/dts/Bindings/clock/qcom,sm8450-camcc.yaml index 48986460f9..fa0e5b6b02 100644 --- a/dts/Bindings/clock/qcom,sm8450-camcc.yaml +++ b/dts/Bindings/clock/qcom,sm8450-camcc.yaml @@ -17,6 +17,7 @@ description: | include/dt-bindings/clock/qcom,sm8450-camcc.h include/dt-bindings/clock/qcom,sm8550-camcc.h include/dt-bindings/clock/qcom,sc8280xp-camcc.h + include/dt-bindings/clock/qcom,x1e80100-camcc.h allOf: - $ref: qcom,gcc.yaml# @@ -27,6 +28,7 @@ properties: - qcom,sc8280xp-camcc - qcom,sm8450-camcc - qcom,sm8550-camcc + - qcom,x1e80100-camcc clocks: items: diff --git a/dts/Bindings/clock/qcom,sm8450-gpucc.yaml b/dts/Bindings/clock/qcom,sm8450-gpucc.yaml index 1a384e8532..36974309cf 100644 --- a/dts/Bindings/clock/qcom,sm8450-gpucc.yaml +++ b/dts/Bindings/clock/qcom,sm8450-gpucc.yaml @@ -18,6 +18,7 @@ description: | include/dt-bindings/clock/qcom,sm8550-gpucc.h include/dt-bindings/reset/qcom,sm8450-gpucc.h include/dt-bindings/reset/qcom,sm8650-gpucc.h + include/dt-bindings/reset/qcom,x1e80100-gpucc.h properties: compatible: @@ -25,6 +26,7 @@ properties: - qcom,sm8450-gpucc - qcom,sm8550-gpucc - qcom,sm8650-gpucc + - qcom,x1e80100-gpucc clocks: items: diff --git a/dts/Bindings/clock/qcom,sm8550-dispcc.yaml b/dts/Bindings/clock/qcom,sm8550-dispcc.yaml index c129f8c16b..bad0260764 100644 --- a/dts/Bindings/clock/qcom,sm8550-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sm8550-dispcc.yaml @@ -14,12 +14,17 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM8550. - See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h + See also: + - include/dt-bindings/clock/qcom,sm8550-dispcc.h + - include/dt-bindings/clock/qcom,sm8650-dispcc.h + - include/dt-bindings/clock/qcom,x1e80100-dispcc.h properties: compatible: enum: - qcom,sm8550-dispcc + - qcom,sm8650-dispcc + - qcom,x1e80100-dispcc clocks: items: diff --git a/dts/Bindings/clock/qcom,sm8550-tcsr.yaml b/dts/Bindings/clock/qcom,sm8550-tcsr.yaml index af16b05eac..48fdd562d7 100644 --- a/dts/Bindings/clock/qcom,sm8550-tcsr.yaml +++ b/dts/Bindings/clock/qcom,sm8550-tcsr.yaml @@ -23,6 +23,7 @@ properties: - enum: - qcom,sm8550-tcsr - qcom,sm8650-tcsr + - qcom,x1e80100-tcsr - const: syscon clocks: diff --git a/dts/Bindings/clock/qcom,sm8650-dispcc.yaml b/dts/Bindings/clock/qcom,sm8650-dispcc.yaml deleted file mode 100644 index 5e0c45c380..0000000000 --- a/dts/Bindings/clock/qcom,sm8650-dispcc.yaml +++ /dev/null @@ -1,106 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display Clock & Reset Controller for SM8650 - -maintainers: - - Bjorn Andersson <andersson@kernel.org> - - Neil Armstrong <neil.armstrong@linaro.org> - -description: | - Qualcomm display clock control module provides the clocks, resets and power - domains on SM8650. - - See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h - -properties: - compatible: - enum: - - qcom,sm8650-dispcc - - clocks: - items: - - description: Board XO source - - description: Board Always On XO source - - description: Display's AHB clock - - description: sleep clock - - description: Byte clock from DSI PHY0 - - description: Pixel clock from DSI PHY0 - - description: Byte clock from DSI PHY1 - - description: Pixel clock from DSI PHY1 - - description: Link clock from DP PHY0 - - description: VCO DIV clock from DP PHY0 - - description: Link clock from DP PHY1 - - description: VCO DIV clock from DP PHY1 - - description: Link clock from DP PHY2 - - description: VCO DIV clock from DP PHY2 - - description: Link clock from DP PHY3 - - description: VCO DIV clock from DP PHY3 - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - - power-domains: - description: - A phandle and PM domain specifier for the MMCX power domain. - maxItems: 1 - - required-opps: - description: - A phandle to an OPP node describing required MMCX performance point. - maxItems: 1 - -required: - - compatible - - reg - - clocks - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,sm8650-gcc.h> - #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> - #include <dt-bindings/power/qcom,rpmhpd.h> - clock-controller@af00000 { - compatible = "qcom,sm8650-dispcc"; - reg = <0x0af00000 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&gcc GCC_DISP_AHB_CLK>, - <&sleep_clk>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, - <&dp0_phy 0>, - <&dp0_phy 1>, - <&dp1_phy 0>, - <&dp1_phy 1>, - <&dp2_phy 0>, - <&dp2_phy 1>, - <&dp3_phy 0>, - <&dp3_phy 1>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - power-domains = <&rpmhpd RPMHPD_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; - }; -... diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml index 9c3dc6c4fa..084259d302 100644 --- a/dts/Bindings/clock/renesas,cpg-mssr.yaml +++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml @@ -50,6 +50,7 @@ properties: - renesas,r8a779a0-cpg-mssr # R-Car V3U - renesas,r8a779f0-cpg-mssr # R-Car S4-8 - renesas,r8a779g0-cpg-mssr # R-Car V4H + - renesas,r8a779h0-cpg-mssr # R-Car V4M reg: maxItems: 1 diff --git a/dts/Bindings/clock/samsung,exynos850-clock.yaml b/dts/Bindings/clock/samsung,exynos850-clock.yaml index c752c8985a..cdc5ded59f 100644 --- a/dts/Bindings/clock/samsung,exynos850-clock.yaml +++ b/dts/Bindings/clock/samsung,exynos850-clock.yaml @@ -36,6 +36,8 @@ properties: - samsung,exynos850-cmu-aud - samsung,exynos850-cmu-cmgp - samsung,exynos850-cmu-core + - samsung,exynos850-cmu-cpucl0 + - samsung,exynos850-cmu-cpucl1 - samsung,exynos850-cmu-dpu - samsung,exynos850-cmu-g3d - samsung,exynos850-cmu-hsi @@ -156,6 +158,46 @@ allOf: properties: compatible: contains: + const: samsung,exynos850-cmu-cpucl0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CPUCL0 switch clock (from CMU_TOP) + - description: CPUCL0 debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_cpucl0_switch + - const: dout_cpucl0_dbg + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-cmu-cpucl1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CPUCL1 switch clock (from CMU_TOP) + - description: CPUCL1 debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_cpucl1_switch + - const: dout_cpucl1_dbg + + - if: + properties: + compatible: + contains: const: samsung,exynos850-cmu-dpu then: diff --git a/dts/Bindings/clock/tesla,fsd-clock.yaml b/dts/Bindings/clock/tesla,fsd-clock.yaml index dc808e2f83..b370a10a23 100644 --- a/dts/Bindings/clock/tesla,fsd-clock.yaml +++ b/dts/Bindings/clock/tesla,fsd-clock.yaml @@ -12,7 +12,7 @@ maintainers: description: | FSD clock controller consist of several clock management unit - (CMU), which generates clocks for various inteernal SoC blocks. + (CMU), which generates clocks for various internal SoC blocks. The root clock comes from external OSC clock (24 MHz). All available clocks are defined as preprocessor macros in diff --git a/dts/Bindings/clock/ti/adpll.txt b/dts/Bindings/clock/ti/adpll.txt index 4c8a2ce2cd..3122360adc 100644 --- a/dts/Bindings/clock/ti/adpll.txt +++ b/dts/Bindings/clock/ti/adpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments ADPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped ADPLL with two to three selectable input clocks and three to four children. diff --git a/dts/Bindings/clock/ti/apll.txt b/dts/Bindings/clock/ti/apll.txt index ade4dd4c30..bbd505c119 100644 --- a/dts/Bindings/clock/ti/apll.txt +++ b/dts/Bindings/clock/ti/apll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments APLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped APLL with usually two selectable input clocks (reference clock and bypass clock), with analog phase locked diff --git a/dts/Bindings/clock/ti/autoidle.txt b/dts/Bindings/clock/ti/autoidle.txt index 7c735dde9f..05645a10a9 100644 --- a/dts/Bindings/clock/ti/autoidle.txt +++ b/dts/Bindings/clock/ti/autoidle.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments autoidle clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register mapped clock which can be put to idle automatically by hardware based on the usage and a configuration bit setting. Autoidle clock is never an individual diff --git a/dts/Bindings/clock/ti/clockdomain.txt b/dts/Bindings/clock/ti/clockdomain.txt index 9c6199249c..edf0b5d427 100644 --- a/dts/Bindings/clock/ti/clockdomain.txt +++ b/dts/Bindings/clock/ti/clockdomain.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments clockdomain. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1] in consumer role. Every clock on TI SoC belongs to one clockdomain, but software only needs this information for specific clocks which require diff --git a/dts/Bindings/clock/ti/composite.txt b/dts/Bindings/clock/ti/composite.txt index 33ac7c9ad0..6f7e1331b5 100644 --- a/dts/Bindings/clock/ti/composite.txt +++ b/dts/Bindings/clock/ti/composite.txt @@ -1,7 +1,5 @@ Binding for TI composite clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped composite clock with multiple different sub-types; diff --git a/dts/Bindings/clock/ti/divider.txt b/dts/Bindings/clock/ti/divider.txt index 9b13b32974..4d7c76f0b3 100644 --- a/dts/Bindings/clock/ti/divider.txt +++ b/dts/Bindings/clock/ti/divider.txt @@ -1,7 +1,5 @@ Binding for TI divider clock -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped adjustable clock rate divider that does not gate and has only one input clock or parent. By default the value programmed into diff --git a/dts/Bindings/clock/ti/dpll.txt b/dts/Bindings/clock/ti/dpll.txt index 37a7cb6ad0..14a1b72c2e 100644 --- a/dts/Bindings/clock/ti/dpll.txt +++ b/dts/Bindings/clock/ti/dpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments DPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped DPLL with usually two selectable input clocks (reference clock and bypass clock), with digital phase locked diff --git a/dts/Bindings/clock/ti/fapll.txt b/dts/Bindings/clock/ti/fapll.txt index c19b3f253b..88986ef39d 100644 --- a/dts/Bindings/clock/ti/fapll.txt +++ b/dts/Bindings/clock/ti/fapll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments FAPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped FAPLL with usually two selectable input clocks (reference clock and bypass clock), and one or more child diff --git a/dts/Bindings/clock/ti/fixed-factor-clock.txt b/dts/Bindings/clock/ti/fixed-factor-clock.txt index 518e3c1422..dc69477b6e 100644 --- a/dts/Bindings/clock/ti/fixed-factor-clock.txt +++ b/dts/Bindings/clock/ti/fixed-factor-clock.txt @@ -1,7 +1,5 @@ Binding for TI fixed factor rate clock sources. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1], and also uses the autoidle support from TI autoidle clock [2]. diff --git a/dts/Bindings/clock/ti/gate.txt b/dts/Bindings/clock/ti/gate.txt index 4982615c01..a8e0335b00 100644 --- a/dts/Bindings/clock/ti/gate.txt +++ b/dts/Bindings/clock/ti/gate.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments gate clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features. If no register diff --git a/dts/Bindings/clock/ti/interface.txt b/dts/Bindings/clock/ti/interface.txt index d3eb5ca92a..85fb1f2d2d 100644 --- a/dts/Bindings/clock/ti/interface.txt +++ b/dts/Bindings/clock/ti/interface.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments interface clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features, including diff --git a/dts/Bindings/clock/ti/mux.txt b/dts/Bindings/clock/ti/mux.txt index b33f641f10..cd56d3c1c0 100644 --- a/dts/Bindings/clock/ti/mux.txt +++ b/dts/Bindings/clock/ti/mux.txt @@ -1,7 +1,5 @@ Binding for TI mux clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped multiplexer with multiple input clock signals or parents, one of which can be selected as output. This clock does not diff --git a/dts/Bindings/crypto/atmel,at91sam9g46-aes.yaml b/dts/Bindings/crypto/atmel,at91sam9g46-aes.yaml index 0b7383b310..7dc0748444 100644 --- a/dts/Bindings/crypto/atmel,at91sam9g46-aes.yaml +++ b/dts/Bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-aes + oneOf: + - const: atmel,at91sam9g46-aes + - items: + - const: microchip,sam9x7-aes + - const: atmel,at91sam9g46-aes reg: maxItems: 1 diff --git a/dts/Bindings/crypto/atmel,at91sam9g46-sha.yaml b/dts/Bindings/crypto/atmel,at91sam9g46-sha.yaml index ee2ffb0343..d378c53314 100644 --- a/dts/Bindings/crypto/atmel,at91sam9g46-sha.yaml +++ b/dts/Bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-sha + oneOf: + - const: atmel,at91sam9g46-sha + - items: + - const: microchip,sam9x7-sha + - const: atmel,at91sam9g46-sha reg: maxItems: 1 diff --git a/dts/Bindings/crypto/atmel,at91sam9g46-tdes.yaml b/dts/Bindings/crypto/atmel,at91sam9g46-tdes.yaml index 3d6ed24b1b..6a441f79ef 100644 --- a/dts/Bindings/crypto/atmel,at91sam9g46-tdes.yaml +++ b/dts/Bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-tdes + oneOf: + - const: atmel,at91sam9g46-tdes + - items: + - const: microchip,sam9x7-tdes + - const: atmel,at91sam9g46-tdes reg: maxItems: 1 diff --git a/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml b/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml index 09e43157cc..e91bc7dc6a 100644 --- a/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - qcom,sa8775p-inline-crypto-engine + - qcom,sc7180-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/dts/Bindings/crypto/qcom-qce.yaml b/dts/Bindings/crypto/qcom-qce.yaml index a48bd38106..e285e382d4 100644 --- a/dts/Bindings/crypto/qcom-qce.yaml +++ b/dts/Bindings/crypto/qcom-qce.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - qcom,sc7280-qce + - qcom,sm6350-qce - qcom,sm8250-qce - qcom,sm8350-qce - qcom,sm8450-qce diff --git a/dts/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/dts/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml new file mode 100644 index 0000000000..29ed42485d --- /dev/null +++ b/dts/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's High LCD Controller (HLCDC) + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image + data from an external display buffer to a TFT LCD panel. The LCDC has one + display input buffer per layer that fetches pixels through the single bus + host interface and a look-up table to allow palletized display + configurations. + +properties: + compatible: + const: atmel,hlcdc-display-controller + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint connecting the LCD panel signals. + + properties: + bus-width: + enum: [ 12, 16, 18, 24 ] + +required: + - '#address-cells' + - '#size-cells' + - compatible + - port@0 + +additionalProperties: false diff --git a/dts/Bindings/display/atmel/hlcdc-dc.txt b/dts/Bindings/display/atmel/hlcdc-dc.txt deleted file mode 100644 index 923aea2534..0000000000 --- a/dts/Bindings/display/atmel/hlcdc-dc.txt +++ /dev/null @@ -1,75 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver - -The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device. -See ../../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be "atmel,hlcdc-display-controller" - - pinctrl-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the default pinctrl states. - - #address-cells: should be set to 1. - - #size-cells: should be set to 0. - -Required children nodes: - Children nodes are encoding available output ports and their connections - to external devices using the OF graph representation (see ../graph.txt). - At least one port node is required. - -Optional properties in grandchild nodes: - Any endpoint grandchild node may specify a desired video interface - according to ../../media/video-interfaces.txt, specifically - - bus-width: recognized values are <12>, <16>, <18> and <24>, and - override any output mode selection heuristic, forcing "rgb444", - "rgb565", "rgb666" and "rgb888" respectively. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; - -Example 2: With a video interface override to force rgb565; as above -but with these changes/additions: - - &hlcdc { - hlcdc-display-controller { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; - - port@0 { - hlcdc_panel_output: endpoint@0 { - bus-width = <16>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/dts/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml new file mode 100644 index 0000000000..3791c9f4eb --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DWC HDMI TX Encoder + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMI transmitter is a Synopsys DesignWare + HDMI 2.0a TX controller IP. + +allOf: + - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx8mp-hdmi-tx + + reg-io-width: + const: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: iahb + - const: isfr + - const: cec + - const: pix + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mp-power.h> + + hdmi@32fd8000 { + compatible = "fsl,imx8mp-hdmi-tx"; + reg = <0x32fd8000 0x7eff>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_32K>, + <&hdmi_tx_phy>; + clock-names = "iahb", "isfr", "cec", "pix"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; + reg-io-width = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + hdmi_tx_from_pvi: endpoint { + remote-endpoint = <&pvi_to_hdmi_tx>; + }; + }; + + port@1 { + reg = <1>; + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ti,sn65dsi86.yaml b/dts/Bindings/display/bridge/ti,sn65dsi86.yaml index 6ec6d287bf..c93878b6d7 100644 --- a/dts/Bindings/display/bridge/ti,sn65dsi86.yaml +++ b/dts/Bindings/display/bridge/ti,sn65dsi86.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SN65DSI86 DSI to eDP bridge chip maintainers: - - Sandeep Panda <spanda@codeaurora.org> + - Douglas Anderson <dianders@chromium.org> description: | The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. diff --git a/dts/Bindings/display/fsl,lcdif.yaml b/dts/Bindings/display/fsl,lcdif.yaml index 1c2be8d6f6..0681fc49aa 100644 --- a/dts/Bindings/display/fsl,lcdif.yaml +++ b/dts/Bindings/display/fsl,lcdif.yaml @@ -123,10 +123,16 @@ allOf: - if: properties: compatible: + const: fsl,imx6sx-lcdif + then: + required: + - power-domains + - if: + properties: + compatible: contains: enum: - fsl,imx6sl-lcdif - - fsl,imx6sx-lcdif - fsl,imx8mm-lcdif - fsl,imx8mn-lcdif - fsl,imx8mp-lcdif diff --git a/dts/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/dts/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml new file mode 100644 index 0000000000..56da163601 --- /dev/null +++ b/dts/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Video Interface + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The HDMI parallel video interface is a timing and sync generator block in the + i.MX8MP SoC, that sits between the video source and the HDMI TX controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pvi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from the LCDIF controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mp-power.h> + + display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x44>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/msm/dsi-controller-main.yaml b/dts/Bindings/display/msm/dsi-controller-main.yaml index 4219936eda..1fa28e9765 100644 --- a/dts/Bindings/display/msm/dsi-controller-main.yaml +++ b/dts/Bindings/display/msm/dsi-controller-main.yaml @@ -19,6 +19,7 @@ properties: - qcom,msm8916-dsi-ctrl - qcom,msm8953-dsi-ctrl - qcom,msm8974-dsi-ctrl + - qcom,msm8976-dsi-ctrl - qcom,msm8996-dsi-ctrl - qcom,msm8998-dsi-ctrl - qcom,qcm2290-dsi-ctrl @@ -248,6 +249,7 @@ allOf: contains: enum: - qcom,msm8953-dsi-ctrl + - qcom,msm8976-dsi-ctrl then: properties: clocks: diff --git a/dts/Bindings/display/msm/gmu.yaml b/dts/Bindings/display/msm/gmu.yaml index 4e1c25b429..b3837368a2 100644 --- a/dts/Bindings/display/msm/gmu.yaml +++ b/dts/Bindings/display/msm/gmu.yaml @@ -224,6 +224,7 @@ allOf: enum: - qcom,adreno-gmu-730.1 - qcom,adreno-gmu-740.1 + - qcom,adreno-gmu-750.1 then: properties: reg: diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml index b019db9547..40b5c6bd11 100644 --- a/dts/Bindings/display/msm/gpu.yaml +++ b/dts/Bindings/display/msm/gpu.yaml @@ -23,7 +23,7 @@ properties: The driver is parsing the compat string for Adreno to figure out the gpu-id and patch level. items: - - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$' - const: qcom,adreno - description: | The driver is parsing the compat string for Imageon to @@ -127,7 +127,7 @@ allOf: properties: compatible: contains: - pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$' then: properties: @@ -203,7 +203,7 @@ allOf: properties: compatible: contains: - pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$' + pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$' then: # Starting with A6xx, the clocks are usually defined in the GMU node properties: diff --git a/dts/Bindings/display/msm/qcom,mdss.yaml b/dts/Bindings/display/msm/qcom,mdss.yaml index 0999ea07f4..e4576546bf 100644 --- a/dts/Bindings/display/msm/qcom,mdss.yaml +++ b/dts/Bindings/display/msm/qcom,mdss.yaml @@ -127,6 +127,7 @@ patternProperties: - qcom,dsi-phy-20nm - qcom,dsi-phy-28nm-8226 - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8660 diff --git a/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml index c0d6a4fdff..e6dc5494ba 100644 --- a/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml @@ -53,6 +53,15 @@ patternProperties: compatible: const: qcom,sm8150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sm8150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml index a01d15a033..c4087cc5ab 100644 --- a/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sm8650-dpu + enum: + - qcom,sm8650-dpu + - qcom,x1e80100-dpu reg: items: diff --git a/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml index bd11119dc9..24cece1e88 100644 --- a/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml @@ -37,18 +37,21 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dpu "^displayport-controller@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dp "^dsi@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: items: @@ -57,6 +60,7 @@ patternProperties: "^phy@[0-9a-f]+$": type: object + additionalProperties: true properties: compatible: const: qcom,sm8650-dsi-phy-4nm diff --git a/dts/Bindings/display/msm/qcom,x1e80100-mdss.yaml b/dts/Bindings/display/msm/qcom,x1e80100-mdss.yaml new file mode 100644 index 0000000000..3b01a0e473 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,x1e80100-mdss.yaml @@ -0,0 +1,251 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 Display MDSS + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,x1e80100-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/dts/Bindings/display/panel/boe,th101mb31ig002-28a.yaml new file mode 100644 index 0000000000..32df26cbfe --- /dev/null +++ b/dts/Bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TH101MB31IG002-28A WXGA DSI Display Panel + +maintainers: + - Manuel Traut <manut@mecka.net> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel + - boe,th101mb31ig002-28a + + reg: true + backlight: true + enable-gpios: true + power-supply: true + port: true + rotation: true + +required: + - compatible + - reg + - enable-gpios + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,th101mb31ig002-28a"; + reg = <0>; + backlight = <&backlight_lcd0>; + enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + rotation = <90>; + power-supply = <&vcc_3v3>; + port { + panel_in_dsi: endpoint { + remote-endpoint = <&dsi_out_con>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/himax,hx83112a.yaml b/dts/Bindings/display/panel/himax,hx83112a.yaml new file mode 100644 index 0000000000..174661d138 --- /dev/null +++ b/dts/Bindings/display/panel/himax,hx83112a.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX83112A-based DSI display panels + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: + The Himax HX83112A is a generic DSI Panel IC used to control + LCD panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + contains: + const: djn,9a-3r063-1102b + + vdd1-supply: + description: Digital voltage rail + + vsn-supply: + description: Positive source voltage rail + + vsp-supply: + description: Negative source voltage rail + + reg: true + port: true + +required: + - compatible + - reg + - reset-gpios + - vdd1-supply + - vsn-supply + - vsp-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "djn,9a-3r063-1102b"; + reg = <0>; + + backlight = <&pm6150l_wled>; + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + vdd1-supply = <&vreg_l1e>; + vsn-supply = <&pm6150l_lcdb_ncp>; + vsp-supply = <&pm6150l_lcdb_ldo>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml index c5944b4d63..d589f16772 100644 --- a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -14,7 +14,9 @@ allOf: properties: compatible: - const: leadtek,ltk500hd1829 + enum: + - leadtek,ltk101b4029w + - leadtek,ltk500hd1829 reg: true backlight: true reset-gpios: true diff --git a/dts/Bindings/display/panel/novatek,nt35510.yaml b/dts/Bindings/display/panel/novatek,nt35510.yaml index bc92928c80..91921f4b0e 100644 --- a/dts/Bindings/display/panel/novatek,nt35510.yaml +++ b/dts/Bindings/display/panel/novatek,nt35510.yaml @@ -15,7 +15,9 @@ allOf: properties: compatible: items: - - const: hydis,hva40wv1 + - enum: + - frida,frd400b25025 + - hydis,hva40wv1 - const: novatek,nt35510 description: This indicates the panel manufacturer of the panel that is in turn using the NT35510 panel driver. The compatible @@ -29,6 +31,7 @@ properties: vddi-supply: description: regulator that supplies the vddi voltage backlight: true + port: true required: - compatible diff --git a/dts/Bindings/display/panel/novatek,nt36672e.yaml b/dts/Bindings/display/panel/novatek,nt36672e.yaml new file mode 100644 index 0000000000..dc4672f3d0 --- /dev/null +++ b/dts/Bindings/display/panel/novatek,nt36672e.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36672E LCD DSI Panel + +maintainers: + - Ritesh Kumar <quic_riteshk@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: novatek,nt36672e + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: true + avdd-supply: true + avee-supply: true + port: true + reset-gpios: true + backlight: true + +required: + - compatible + - reg + - vddi-supply + - avdd-supply + - avee-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "novatek,nt36672e"; + reg = <0>; + + reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; + + vddi-supply = <&vreg_l8c_1p8>; + avdd-supply = <&disp_avdd>; + avee-supply = <&disp_avee>; + + backlight = <&pwm_backlight>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/panel-lvds.yaml b/dts/Bindings/display/panel/panel-lvds.yaml index 9f1016551e..155d8ffa8f 100644 --- a/dts/Bindings/display/panel/panel-lvds.yaml +++ b/dts/Bindings/display/panel/panel-lvds.yaml @@ -39,9 +39,13 @@ properties: compatible: items: - enum: + # Admatec 9904379 10.1" 1024x600 LVDS panel + - admatec,9904379 - auo,b101ew05 # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel - chunghwa,claa070wp03xg + # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel + - edt,etml0700z9ndha # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - hannstar,hsd101pww2 # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 634a10c6f2..a95445f408 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -73,6 +73,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel + - boe,bp082wx1-100 # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel - boe,bp101wx1-100 # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel @@ -141,6 +143,8 @@ properties: - edt,etm0700g0edh6 # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch - edt,etml0700y5dha + # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch + - edt,etml1010g3dra # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with # capacitive touch - edt,etmv570g2dhu diff --git a/dts/Bindings/display/panel/rocktech,jh057n00900.yaml b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml index 97cccd8a84..6ec471284f 100644 --- a/dts/Bindings/display/panel/rocktech,jh057n00900.yaml +++ b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml @@ -22,6 +22,8 @@ properties: enum: # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel - anbernic,rg353v-panel-v2 + # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel + - powkiddy,rgb10max3-panel # Powkiddy RGB30 3.0" 720x720 TFT LCD panel - powkiddy,rgb30-panel # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel @@ -43,6 +45,7 @@ properties: reset-gpios: true backlight: true + rotation: true required: - compatible diff --git a/dts/Bindings/display/panel/visionox,r66451.yaml b/dts/Bindings/display/panel/visionox,r66451.yaml index 6ba3236839..187840bb76 100644 --- a/dts/Bindings/display/panel/visionox,r66451.yaml +++ b/dts/Bindings/display/panel/visionox,r66451.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# diff --git a/dts/Bindings/display/panel/visionox,rm69299.yaml b/dts/Bindings/display/panel/visionox,rm69299.yaml index fa745a6f44..7723990675 100644 --- a/dts/Bindings/display/panel/visionox,rm69299.yaml +++ b/dts/Bindings/display/panel/visionox,rm69299.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Visionox model RM69299 Panels maintainers: - - Harigovindan P <harigovi@codeaurora.org> + - Abhinav Kumar <quic_abhinavk@quicinc.com> + - Jessica Zhang <quic_jesszhan@quicinc.com> description: | This binding is for display panels using a Visionox RM692999 panel. diff --git a/dts/Bindings/display/renesas,rzg2l-du.yaml b/dts/Bindings/display/renesas,rzg2l-du.yaml new file mode 100644 index 0000000000..08e5b94780 --- /dev/null +++ b/dts/Bindings/display/renesas,rzg2l-du.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Display Unit (DU) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L + and RZ/V2L SoCs. + +properties: + compatible: + oneOf: + - enum: + - renesas,r9a07g044-du # RZ/G2{L,LC} + - items: + - enum: + - renesas,r9a07g054-du # RZ/V2L + - const: renesas,r9a07g044-du # RZ/G2L fallback + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Video clock + + clock-names: + items: + - const: aclk + - const: pclk + - const: vclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The connections to the DU output video ports are modeled using the OF + graph bindings. The number of ports and their assignment are + model-dependent. Each port shall have a single endpoint. + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + + required: + - port@0 + + unevaluatedProperties: false + + renesas,vsps: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to VSP instance that serves the DU channel + - description: Channel index identifying the LIF instance in that VSP + description: + A list of phandle and channel index tuples to the VSPs that handle the + memory interfaces for the DU channels. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - power-domains + - ports + - renesas,vsps + +additionalProperties: false + +examples: + # RZ/G2L DU + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display@10890000 { + compatible = "renesas,r9a07g044-du"; + reg = <0x10890000 0x10000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + power-domains = <&cpg>; + + renesas,vsps = <&vspd0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml index 7e59dee15a..af638b6c0d 100644 --- a/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -94,11 +94,14 @@ properties: - const: default - const: unwedge + power-domains: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports - patternProperties: - "^port(@0)?$": + properties: + port@0: $ref: /schemas/graph.yaml#/properties/port description: Input of the DWC HDMI TX properties: @@ -108,11 +111,14 @@ properties: description: Connection to the VOPB endpoint@1: description: Connection to the VOPL - properties: port@1: $ref: /schemas/graph.yaml#/properties/port description: Output of the DWC HDMI TX + required: + - port@0 + - port@1 + rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,19 +141,25 @@ examples: #include <dt-bindings/clock/rk3288-cru.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/rk3288-power.h> hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; + ddc-i2c-bus = <&i2c5>; + power-domains = <&power RK3288_PD_VIO>; + rockchip,grf = <&grf>; ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -155,11 +167,20 @@ examples: reg = <0>; remote-endpoint = <&vopb_out_hdmi>; }; + hdmi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_hdmi>; }; }; + + port@1 { + reg = <1>; + + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; }; }; diff --git a/dts/Bindings/display/solomon,ssd1307fb.yaml b/dts/Bindings/display/solomon,ssd1307fb.yaml index 3afbb52d1b..153ff86fb4 100644 --- a/dts/Bindings/display/solomon,ssd1307fb.yaml +++ b/dts/Bindings/display/solomon,ssd1307fb.yaml @@ -131,9 +131,9 @@ allOf: const: sinowealth,sh1106 then: properties: - width: + solomon,width: default: 132 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -149,9 +149,9 @@ allOf: - solomon,ssd1305 then: properties: - width: + solomon,width: default: 132 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -167,9 +167,9 @@ allOf: - solomon,ssd1306 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 @@ -185,9 +185,9 @@ allOf: - solomon,ssd1307 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 39 solomon,dclk-div: default: 2 @@ -205,9 +205,9 @@ allOf: - solomon,ssd1309 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 64 solomon,dclk-div: default: 1 diff --git a/dts/Bindings/display/solomon,ssd132x.yaml b/dts/Bindings/display/solomon,ssd132x.yaml index 37975ee61c..dd7939989c 100644 --- a/dts/Bindings/display/solomon,ssd132x.yaml +++ b/dts/Bindings/display/solomon,ssd132x.yaml @@ -30,9 +30,9 @@ allOf: const: solomon,ssd1322 then: properties: - width: + solomon,width: default: 480 - height: + solomon,height: default: 128 - if: @@ -42,9 +42,9 @@ allOf: const: solomon,ssd1325 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 80 - if: @@ -54,9 +54,9 @@ allOf: const: solomon,ssd1327 then: properties: - width: + solomon,width: default: 128 - height: + solomon,height: default: 128 unevaluatedProperties: false diff --git a/dts/Bindings/display/solomon,ssd133x.yaml b/dts/Bindings/display/solomon,ssd133x.yaml new file mode 100644 index 0000000000..b7780038a3 --- /dev/null +++ b/dts/Bindings/display/solomon,ssd133x.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD133x OLED Display Controllers + +maintainers: + - Javier Martinez Canillas <javierm@redhat.com> + +allOf: + - $ref: solomon,ssd-common.yaml# + +properties: + compatible: + enum: + - solomon,ssd1331 + + solomon,width: + default: 96 + + solomon,height: + default: 64 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + oled@0 { + compatible = "solomon,ssd1331"; + reg = <0x0>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + }; diff --git a/dts/Bindings/display/ti/ti,am65x-dss.yaml b/dts/Bindings/display/ti/ti,am65x-dss.yaml index b6767ef0d2..55e3e490d0 100644 --- a/dts/Bindings/display/ti/ti,am65x-dss.yaml +++ b/dts/Bindings/display/ti/ti,am65x-dss.yaml @@ -37,6 +37,7 @@ properties: - description: OVR2 overlay manager for vp2 - description: VP1 video port 1 - description: VP2 video port 2 + - description: common1 DSS register area reg-names: items: @@ -47,6 +48,7 @@ properties: - const: ovr2 - const: vp1 - const: vp2 + - const: common1 clocks: items: @@ -147,9 +149,10 @@ examples: <0x04a07000 0x1000>, /* ovr1 */ <0x04a08000 0x1000>, /* ovr2 */ <0x04a0a000 0x1000>, /* vp1 */ - <0x04a0b000 0x1000>; /* vp2 */ + <0x04a0b000 0x1000>, /* vp2 */ + <0x04a01000 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 67 1>, diff --git a/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml b/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml index ec2d7a789f..0f2501f72c 100644 --- a/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/dts/Bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -28,6 +28,9 @@ properties: - items: - const: allwinner,sun8i-r40-dma - const: allwinner,sun50i-a64-dma + - items: + - const: allwinner,sun50i-h616-dma + - const: allwinner,sun50i-a100-dma reg: maxItems: 1 @@ -59,10 +62,11 @@ required: if: properties: compatible: - enum: - - allwinner,sun20i-d1-dma - - allwinner,sun50i-a100-dma - - allwinner,sun50i-h6-dma + contains: + enum: + - allwinner,sun20i-d1-dma + - allwinner,sun50i-a100-dma + - allwinner,sun50i-h6-dma then: properties: diff --git a/dts/Bindings/dma/fsl,edma.yaml b/dts/Bindings/dma/fsl,edma.yaml index 437db0c623..aa51d278cb 100644 --- a/dts/Bindings/dma/fsl,edma.yaml +++ b/dts/Bindings/dma/fsl,edma.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8qm-edma - fsl,imx93-edma3 - fsl,imx93-edma4 + - fsl,imx95-edma5 - items: - const: fsl,ls1028a-edma - const: fsl,vf610-edma @@ -83,6 +84,7 @@ allOf: - fsl,imx8qm-edma - fsl,imx93-edma3 - fsl,imx93-edma4 + - fsl,imx95-edma5 then: properties: "#dma-cells": diff --git a/dts/Bindings/dma/fsl,imx-sdma.yaml b/dts/Bindings/dma/fsl,imx-sdma.yaml index b95dd8db5a..37135fa024 100644 --- a/dts/Bindings/dma/fsl,imx-sdma.yaml +++ b/dts/Bindings/dma/fsl,imx-sdma.yaml @@ -92,7 +92,8 @@ properties: description: needs firmware more than ver 2 - Shared ASRC: 23 - SAI: 24 - - HDMI Audio: 25 + - Multi SAI: 25 + - HDMI Audio: 26 The third cell: transfer priority ID enum: diff --git a/dts/Bindings/dma/marvell,mmp-dma.yaml b/dts/Bindings/dma/marvell,mmp-dma.yaml new file mode 100644 index 0000000000..d447d5207b --- /dev/null +++ b/dts/Bindings/dma/marvell,mmp-dma.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP DMA controller + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +description: + Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio. + +properties: + compatible: + enum: + - marvell,pdma-1.0 + - marvell,adma-1.0 + - marvell,pxa910-squ + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt lines for the controller, may be shared or one per DMA channel + minItems: 1 + + asram: + description: + A phandle to the SRAM pool + $ref: /schemas/types.yaml#/definitions/phandle + + '#dma-channels': + deprecated: true + + '#dma-requests': + deprecated: true + +required: + - compatible + - reg + - interrupts + - '#dma-cells' + +allOf: + - $ref: dma-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - marvell,pdma-1.0 + then: + properties: + asram: false + else: + required: + - asram + +unevaluatedProperties: false + +examples: + - | + dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-cells = <2>; + dma-channels = <16>; + }; diff --git a/dts/Bindings/dma/mediatek,mt7622-hsdma.yaml b/dts/Bindings/dma/mediatek,mt7622-hsdma.yaml new file mode 100644 index 0000000000..3f1e120e40 --- /dev/null +++ b/dts/Bindings/dma/mediatek,mt7622-hsdma.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek High-Speed DMA Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-hsdma + - mediatek,mt7623-hsdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: hsdma + + power-domains: + maxItems: 1 + + "#dma-cells": + description: Channel number + const: 1 + +required: + - reg + - interrupts + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt2701-power.h> + + dma-controller@1b007000 { + compatible = "mediatek,mt7623-hsdma"; + reg = <0x1b007000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETHSYS_HSDMA>; + clock-names = "hsdma"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + #dma-cells = <1>; + }; diff --git a/dts/Bindings/dma/mmp-dma.txt b/dts/Bindings/dma/mmp-dma.txt deleted file mode 100644 index ec18bf0a80..0000000000 --- a/dts/Bindings/dma/mmp-dma.txt +++ /dev/null @@ -1,81 +0,0 @@ -* MARVELL MMP DMA controller - -Marvell Peripheral DMA Controller -Used platforms: pxa688, pxa910, pxa3xx, etc - -Required properties: -- compatible: Should be "marvell,pdma-1.0" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for pdma device - -Optional properties: -- dma-channels: Number of DMA channels supported by the controller (defaults - to 32 when not specified) -- #dma-channels: deprecated -- dma-requests: Number of DMA requestor lines supported by the controller - (defaults to 32 when not specified) -- #dma-requests: deprecated - -"marvell,pdma-1.0" -Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. - -Examples: - -/* - * Each channel has specific irq - * ICU parse out irq channel from ICU register, - * while DMA controller may not able to distinguish the irq channel - * Using this method, interrupt-parent is required as demuxer - * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, - * 18~21 is ADMA irq - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - interrupt-parent = <&intcmux32>; - dma-channels = <16>; - }; - -/* - * One irq for all channels - * Dmaengine driver (DMA controller) distinguish irq channel via - * parsing internal register - */ -pdma: dma-controller@d4000000 { - compatible = "marvell,pdma-1.0"; - reg = <0xd4000000 0x10000>; - interrupts = <47>; - dma-channels = <16>; - }; - - -Marvell Two Channel DMA Controller used specifically for audio -Used platforms: pxa688, pxa910 - -Required properties: -- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" -- reg: Should contain DMA registers location and length. -- interrupts: Either contain all of the per-channel DMA interrupts - or one irq for dma device - -"marvell,adma-1.0" used on pxa688 -"marvell,pxa910-squ" used on pxa910 - -Examples: - -/* each channel has specific irq */ -adma0: dma-controller@d42a0800 { - compatible = "marvell,adma-1.0"; - reg = <0xd42a0800 0x100>; - interrupts = <18 19>; - interrupt-parent = <&intcmux32>; - }; - -/* One irq for all channels */ -squ: dma-controller@d42a0800 { - compatible = "marvell,pxa910-squ"; - reg = <0xd42a0800 0x100>; - interrupts = <46>; - }; diff --git a/dts/Bindings/dma/mtk-hsdma.txt b/dts/Bindings/dma/mtk-hsdma.txt deleted file mode 100644 index 4bb317359d..0000000000 --- a/dts/Bindings/dma/mtk-hsdma.txt +++ /dev/null @@ -1,33 +0,0 @@ -MediaTek High-Speed DMA Controller -================================== - -This device follows the generic DMA bindings defined in dma/dma.txt. - -Required properties: - -- compatible: Must be one of - "mediatek,mt7622-hsdma": for MT7622 SoC - "mediatek,mt7623-hsdma": for MT7623 SoC -- reg: Should contain the register's base address and length. -- interrupts: Should contain a reference to the interrupt used by this - device. -- clocks: Should be the clock specifiers corresponding to the entry in - clock-names property. -- clock-names: Should contain "hsdma" entries. -- power-domains: Phandle to the power domain that the device is part of -- #dma-cells: The length of the DMA specifier, must be <1>. This one cell - in dmas property of a client device represents the channel - number. -Example: - - hsdma: dma-controller@1b007000 { - compatible = "mediatek,mt7623-hsdma"; - reg = <0 0x1b007000 0 0x1000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>; - clocks = <ðsys CLK_ETHSYS_HSDMA>; - clock-names = "hsdma"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - #dma-cells = <1>; - }; - -DMA clients must use the format described in dma/dma.txt file. diff --git a/dts/Bindings/dma/renesas,rcar-dmac.yaml b/dts/Bindings/dma/renesas,rcar-dmac.yaml index 03aa067b12..04fc4a99a7 100644 --- a/dts/Bindings/dma/renesas,rcar-dmac.yaml +++ b/dts/Bindings/dma/renesas,rcar-dmac.yaml @@ -46,6 +46,7 @@ properties: - renesas,dmac-r8a779a0 # R-Car V3U - renesas,dmac-r8a779f0 # R-Car S4-8 - renesas,dmac-r8a779g0 # R-Car V4H + - renesas,dmac-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-dmac # R-Car Gen4 reg: true diff --git a/dts/Bindings/dts-coding-style.rst b/dts/Bindings/dts-coding-style.rst index a9bdd2b59d..8a68331075 100644 --- a/dts/Bindings/dts-coding-style.rst +++ b/dts/Bindings/dts-coding-style.rst @@ -144,6 +144,8 @@ Example:: #dma-cells = <1>; clocks = <&clock_controller 0>, <&clock_controller 1>; clock-names = "bus", "host"; + #address-cells = <1>; + #size-cells = <1>; vendor,custom-property = <2>; status = "disabled"; diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml index 1812ef31d5..3c36cd0510 100644 --- a/dts/Bindings/eeprom/at24.yaml +++ b/dts/Bindings/eeprom/at24.yaml @@ -69,14 +69,10 @@ properties: - items: pattern: c32$ - items: - pattern: c32d-wl$ - - items: pattern: cs32$ - items: pattern: c64$ - items: - pattern: c64d-wl$ - - items: pattern: cs64$ - items: pattern: c128$ @@ -136,6 +132,7 @@ properties: - renesas,r1ex24128 - samsung,s524ad0xd1 - const: atmel,24c128 + - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st label: description: Descriptive name of the EEPROM. diff --git a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index 8e584857dd..ab8f32c440 100644 --- a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -26,6 +26,12 @@ properties: - description: For implementations complying for Versal. const: xlnx,versal-firmware + - description: For implementations complying for Versal NET. + items: + - enum: + - xlnx,versal-net-firmware + - const: xlnx,versal-firmware + method: description: | The method of calling the PM-API firmware layer. @@ -41,7 +47,53 @@ properties: "#power-domain-cells": const: 1 - versal_fpga: + clock-controller: + $ref: /schemas/clock/xlnx,versal-clk.yaml# + description: The clock controller is a hardware block of Xilinx versal + clock tree. It reads required input clock frequencies from the devicetree + and acts as clock provider for all clock consumers of PS clocks.list of + clock specifiers which are external input clocks to the given clock + controller. + type: object + + gpio: + $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml# + description: The gpio node describes connect to PS_MODE pins via firmware + interface. + type: object + + soc-nvmem: + $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml# + description: The ZynqMP MPSoC provides access to the hardware related data + like SOC revision, IDCODE and specific purpose efuses. + type: object + + pcap: + $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml + description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to + configure the Programmable Logic (PL). The configuration uses the + firmware interface. + type: object + + pinctrl: + $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml# + description: The pinctrl node provides access to pinconfig and pincontrol + functionality available in firmware. + type: object + + power-management: + $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml# + description: The zynqmp-power node describes the power management + configurations. It will control remote suspend/shutdown interfaces. + type: object + + reset-controller: + $ref: /schemas/reset/xlnx,zynqmp-reset.yaml# + description: The reset-controller node describes connection to the reset + functionality via firmware interface. + type: object + + versal-fpga: $ref: /schemas/fpga/xlnx,versal-fpga.yaml# description: Compatible of the FPGA device. type: object @@ -53,15 +105,6 @@ properties: vector. type: object - clock-controller: - $ref: /schemas/clock/xlnx,versal-clk.yaml# - description: The clock controller is a hardware block of Xilinx versal - clock tree. It reads required input clock frequencies from the devicetree - and acts as clock provider for all clock consumers of PS clocks.list of - clock specifiers which are external input clocks to the given clock - controller. - type: object - required: - compatible @@ -73,7 +116,38 @@ examples: firmware { zynqmp_firmware: zynqmp-firmware { #power-domain-cells = <1>; + soc-nvmem { + compatible = "xlnx,zynqmp-nvmem-fw"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + }; + }; + gpio { + compatible = "xlnx,zynqmp-gpio-modepin"; + gpio-controller; + #gpio-cells = <2>; + }; + pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; }; + pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + }; + power-management { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; }; sata { @@ -84,7 +158,7 @@ examples: compatible = "xlnx,versal-firmware"; method = "smc"; - versal_fpga: versal_fpga { + versal_fpga: versal-fpga { compatible = "xlnx,versal-fpga"; }; diff --git a/dts/Bindings/fpga/fpga-region.txt b/dts/Bindings/fpga/fpga-region.txt deleted file mode 100644 index 528df8a0e6..0000000000 --- a/dts/Bindings/fpga/fpga-region.txt +++ /dev/null @@ -1,479 +0,0 @@ -FPGA Region Device Tree Binding - -Alan Tull 2016 - - CONTENTS - - Introduction - - Terminology - - Sequence - - FPGA Region - - Supported Use Models - - Device Tree Examples - - Constraints - - -Introduction -============ - -FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in -the Device Tree. FPGA Regions provide a way to program FPGAs under device tree -control. - -This device tree binding document hits some of the high points of FPGA usage and -attempts to include terminology used by both major FPGA manufacturers. This -document isn't a replacement for any manufacturers specifications for FPGA -usage. - - -Terminology -=========== - -Full Reconfiguration - * The entire FPGA is programmed. - -Partial Reconfiguration (PR) - * A section of an FPGA is reprogrammed while the rest of the FPGA is not - affected. - * Not all FPGA's support PR. - -Partial Reconfiguration Region (PRR) - * Also called a "reconfigurable partition" - * A PRR is a specific section of an FPGA reserved for reconfiguration. - * A base (or static) FPGA image may create a set of PRR's that later may - be independently reprogrammed many times. - * The size and specific location of each PRR is fixed. - * The connections at the edge of each PRR are fixed. The image that is loaded - into a PRR must fit and must use a subset of the region's connections. - * The busses within the FPGA are split such that each region gets its own - branch that may be gated independently. - -Persona - * Also called a "partial bit stream" - * An FPGA image that is designed to be loaded into a PRR. There may be - any number of personas designed to fit into a PRR, but only one at at time - may be loaded. - * A persona may create more regions. - -FPGA Bridge - * FPGA Bridges gate bus signals between a host and FPGA. - * FPGA Bridges should be disabled while the FPGA is being programmed to - prevent spurious signals on the cpu bus and to the soft logic. - * FPGA bridges may be actual hardware or soft logic on an FPGA. - * During Full Reconfiguration, hardware bridges between the host and FPGA - will be disabled. - * During Partial Reconfiguration of a specific region, that region's bridge - will be used to gate the busses. Traffic to other regions is not affected. - * In some implementations, the FPGA Manager transparently handles gating the - buses, eliminating the need to show the hardware FPGA bridges in the - device tree. - * An FPGA image may create a set of reprogrammable regions, each having its - own bridge and its own split of the busses in the FPGA. - -FPGA Manager - * An FPGA Manager is a hardware block that programs an FPGA under the control - of a host processor. - -Base Image - * Also called the "static image" - * An FPGA image that is designed to do full reconfiguration of the FPGA. - * A base image may set up a set of partial reconfiguration regions that may - later be reprogrammed. - - ---------------- ---------------------------------- - | Host CPU | | FPGA | - | | | | - | ----| | ----------- -------- | - | | H | | |==>| Bridge0 |<==>| PRR0 | | - | | W | | | ----------- -------- | - | | | | | | - | | B |<=====>|<==| ----------- -------- | - | | R | | |==>| Bridge1 |<==>| PRR1 | | - | | I | | | ----------- -------- | - | | D | | | | - | | G | | | ----------- -------- | - | | E | | |==>| Bridge2 |<==>| PRR2 | | - | ----| | ----------- -------- | - | | | | - ---------------- ---------------------------------- - -Figure 1: An FPGA set up with a base image that created three regions. Each -region (PRR0-2) gets its own split of the busses that is independently gated by -a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be -reprogrammed independently while the rest of the system continues to function. - - -Sequence -======== - -When a DT overlay that targets an FPGA Region is applied, the FPGA Region will -do the following: - - 1. Disable appropriate FPGA bridges. - 2. Program the FPGA using the FPGA manager. - 3. Enable the FPGA bridges. - 4. The Device Tree overlay is accepted into the live tree. - 5. Child devices are populated. - -When the overlay is removed, the child nodes will be removed and the FPGA Region -will disable the bridges. - - -FPGA Region -=========== - -FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA -Region brings together the elements needed to program on a running system and -add the child devices: - - * FPGA Manager - * FPGA Bridges - * image-specific information needed to to the programming. - * child nodes - -The intended use is that a Device Tree overlay (DTO) can be used to reprogram an -FPGA while an operating system is running. - -An FPGA Region that exists in the live Device Tree reflects the current state. -If the live tree shows a "firmware-name" property or child nodes under an FPGA -Region, the FPGA already has been programmed. A DTO that targets an FPGA Region -and adds the "firmware-name" property is taken as a request to reprogram the -FPGA. After reprogramming is successful, the overlay is accepted into the live -tree. - -The base FPGA Region in the device tree represents the FPGA and supports full -reconfiguration. It must include a phandle to an FPGA Manager. The base -FPGA region will be the child of one of the hardware bridges (the bridge that -allows register access) between the cpu and the FPGA. If there are more than -one bridge to control during FPGA programming, the region will also contain a -list of phandles to the additional hardware FPGA Bridges. - -For partial reconfiguration (PR), each PR region will have an FPGA Region. -These FPGA regions are children of FPGA bridges which are then children of the -base FPGA region. The "Full Reconfiguration to add PRR's" example below shows -this. - -If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA -Manager specified by its ancestor FPGA Region. This supports both the case -where the same FPGA Manager is used for all of an FPGA as well the case where -a different FPGA Manager is used for each region. - -FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents -shutting down bridges that are upstream from the other active regions while one -region is getting reconfigured (see Figure 1 above). During PR, the FPGA's -hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges -within the static image of the FPGA. - -Required properties: -- compatible : should contain "fpga-region" -- fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions - inherit this property from their ancestor regions. An fpga-mgr property - in a region will override any inherited FPGA manager. -- #address-cells, #size-cells, ranges : must be present to handle address space - mapping for child nodes. - -Optional properties: -- firmware-name : should contain the name of an FPGA image file located on the - firmware search path. If this property shows up in a live device tree - it indicates that the FPGA has already been programmed with this image. - If this property is in an overlay targeting an FPGA region, it is a - request to program the FPGA with that image. -- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be - controlled during FPGA programming along with the parent FPGA bridge. - This property is optional if the FPGA Manager handles the bridges. - If the fpga-region is the child of an fpga-bridge, the list should not - contain the parent bridge. -- partial-fpga-config : boolean, set if partial reconfiguration is to be done, - otherwise full reconfiguration is done. -- external-fpga-config : boolean, set if the FPGA has already been configured - prior to OS boot up. -- encrypted-fpga-config : boolean, set if the bitstream is encrypted -- region-unfreeze-timeout-us : The maximum time in microseconds to wait for - bridges to successfully become enabled after the region has been - programmed. -- region-freeze-timeout-us : The maximum time in microseconds to wait for - bridges to successfully become disabled before the region has been - programmed. -- config-complete-timeout-us : The maximum time in microseconds time for the - FPGA to go to operating mode after the region has been programmed. -- child nodes : devices in the FPGA after programming. - -In the example below, when an overlay is applied targeting fpga-region0, -fpga_mgr is used to program the FPGA. Two bridges are controlled during -programming: the parent fpga_bridge0 and fpga_bridge1. Because the region is -the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the -fpga-bridges property. During programming, these bridges are disabled, the -firmware specified in the overlay is loaded to the FPGA using the FPGA manager -specified in the region. If FPGA programming succeeds, the bridges are -reenabled and the overlay makes it into the live device tree. The child devices -are then populated. If FPGA programming fails, the bridges are left disabled -and the overlay is rejected. The overlay's ranges property maps the lwhps -bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by -the two child devices. - -Example: -Base tree contains: - - fpga_mgr: fpga-mgr@ff706000 { - compatible = "altr,socfpga-fpga-mgr"; - reg = <0xff706000 0x1000 - 0xffb90000 0x20>; - interrupts = <0 175 4>; - }; - - fpga_bridge0: fpga-bridge@ff400000 { - compatible = "altr,socfpga-lwhps2fpga-bridge"; - reg = <0xff400000 0x100000>; - resets = <&rst LWHPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - fpga_region0: fpga-region0 { - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - }; - - fpga_bridge1: fpga-bridge@ff500000 { - compatible = "altr,socfpga-hps2fpga-bridge"; - reg = <0xff500000 0x10000>; - resets = <&rst HPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - }; - -Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_system.rbf"; - fpga-bridges = <&fpga_bridge1>; - ranges = <0x20000 0xff200000 0x100000>, - <0x0 0xc0000000 0x20000000>; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - altr,ngpio = <4>; - #gpio-cells = <2>; - clocks = <2>; - gpio-controller; - }; - - onchip-memory { - device_type = "memory"; - compatible = "altr,onchipmem-15.1"; - reg = <0x0 0x10000>; - }; -}; - - -Supported Use Models -==================== - -In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and -a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some -uses are specific to an FPGA device. - - * No FPGA Bridges - In this case, the FPGA Manager which programs the FPGA also handles the - bridges behind the scenes. No FPGA Bridge devices are needed for full - reconfiguration. - - * Full reconfiguration with hardware bridges - In this case, there are hardware bridges between the processor and FPGA that - need to be controlled during full reconfiguration. Before the overlay is - applied, the live DT must include the FPGA Manager, FPGA Bridges, and a - FPGA Region. The FPGA Region is the child of the bridge that allows - register access to the FPGA. Additional bridges may be listed in a - fpga-bridges property in the FPGA region or in the device tree overlay. - - * Partial reconfiguration with bridges in the FPGA - In this case, the FPGA will have one or more PRR's that may be programmed - separately while the rest of the FPGA can remain active. To manage this, - bridges need to exist in the FPGA that can gate the buses going to each FPGA - region while the buses are enabled for other sections. Before any partial - reconfiguration can be done, a base FPGA image must be loaded which includes - PRR's with FPGA bridges. The device tree should have an FPGA region for each - PRR. - -Device Tree Examples -==================== - -The intention of this section is to give some simple examples, focusing on -the placement of the elements detailed above, especially: - * FPGA Manager - * FPGA Bridges - * FPGA Region - * ranges - * target-path or target - -For the purposes of this section, I'm dividing the Device Tree into two parts, -each with its own requirements. The two parts are: - * The live DT prior to the overlay being added - * The DT overlay - -The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA -Bridges. The FPGA Region's "fpga-mgr" property specifies the manager by phandle -to handle programming the FPGA. If the FPGA Region is the child of another FPGA -Region, the parent's FPGA Manager is used. If FPGA Bridges need to be involved, -they are specified in the FPGA Region by the "fpga-bridges" property. During -FPGA programming, the FPGA Region will disable the bridges that are in its -"fpga-bridges" list and will re-enable them after FPGA programming has -succeeded. - -The Device Tree Overlay will contain: - * "target-path" or "target" - The insertion point where the contents of the overlay will go into the - live tree. target-path is a full path, while target is a phandle. - * "ranges" - The address space mapping from processor to FPGA bus(ses). - * "firmware-name" - Specifies the name of the FPGA image file on the firmware search - path. The search path is described in the firmware class documentation. - * "partial-fpga-config" - This binding is a boolean and should be present if partial reconfiguration - is to be done. - * child nodes corresponding to hardware that will be loaded in this region of - the FPGA. - -Device Tree Example: Full Reconfiguration without Bridges -========================================================= - -Live Device Tree contains: - fpga_mgr0: fpga-mgr@f8007000 { - compatible = "xlnx,zynq-devcfg-1.0"; - reg = <0xf8007000 0x100>; - interrupt-parent = <&intc>; - interrupts = <0 8 4>; - clocks = <&clkc 12>; - clock-names = "ref_clk"; - syscon = <&slcr>; - }; - - fpga_region0: fpga-region0 { - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr0>; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - -DT Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "zynq-gpio.bin"; - - gpio1: gpio@40000000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = <0x40000000 0x10000>; - gpio-controller; - #gpio-cells = <0x2>; - xlnx,gpio-width= <0x6>; - }; -}; - -Device Tree Example: Full Reconfiguration to add PRR's -====================================================== - -The base FPGA Region is specified similar to the first example above. - -This example programs the FPGA to have two regions that can later be partially -configured. Each region has its own bridge in the FPGA fabric. - -DT Overlay contains: - -/dts-v1/; -/plugin/; - -&fpga_region0 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "base.rbf"; - - fpga-bridge@4400 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4400 0x10>; - - fpga_region1: fpga-region1 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; - - fpga-bridge@4420 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4420 0x10>; - - fpga_region2: fpga-region2 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; -}; - -Device Tree Example: Partial Reconfiguration -============================================ - -This example reprograms one of the PRR's set up in the previous example. - -The sequence that occurs when this overlay is similar to the above, the only -differences are that the FPGA is partially reconfigured due to the -"partial-fpga-config" boolean and the only bridge that is controlled during -programming is the FPGA based bridge of fpga_region1. - -/dts-v1/; -/plugin/; - -&fpga_region1 { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_image2.rbf"; - partial-fpga-config; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - clocks = <0x2>; - altr,ngpio = <0x4>; - #gpio-cells = <0x2>; - gpio-controller; - }; -}; - -Constraints -=========== - -It is beyond the scope of this document to fully describe all the FPGA design -constraints required to make partial reconfiguration work[1] [2] [3], but a few -deserve quick mention. - -A persona must have boundary connections that line up with those of the partition -or region it is designed to go into. - -During programming, transactions through those connections must be stopped and -the connections must be held at a fixed logic level. This can be achieved by -FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. - --- -[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf -[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf -[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf diff --git a/dts/Bindings/fpga/fpga-region.yaml b/dts/Bindings/fpga/fpga-region.yaml new file mode 100644 index 0000000000..77554885a6 --- /dev/null +++ b/dts/Bindings/fpga/fpga-region.yaml @@ -0,0 +1,358 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/fpga-region.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FPGA Region + +maintainers: + - Michal Simek <michal.simek@amd.com> + +description: | + CONTENTS + - Introduction + - Terminology + - Sequence + - FPGA Region + - Supported Use Models + - Constraints + + + Introduction + ============ + + FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in + the Device Tree. FPGA Regions provide a way to program FPGAs under device tree + control. + + The documentation hits some of the high points of FPGA usage and + attempts to include terminology used by both major FPGA manufacturers. This + document isn't a replacement for any manufacturers specifications for FPGA + usage. + + + Terminology + =========== + + Full Reconfiguration + * The entire FPGA is programmed. + + Partial Reconfiguration (PR) + * A section of an FPGA is reprogrammed while the rest of the FPGA is not + affected. + * Not all FPGA's support PR. + + Partial Reconfiguration Region (PRR) + * Also called a "reconfigurable partition" + * A PRR is a specific section of an FPGA reserved for reconfiguration. + * A base (or static) FPGA image may create a set of PRR's that later may + be independently reprogrammed many times. + * The size and specific location of each PRR is fixed. + * The connections at the edge of each PRR are fixed. The image that is loaded + into a PRR must fit and must use a subset of the region's connections. + * The busses within the FPGA are split such that each region gets its own + branch that may be gated independently. + + Persona + * Also called a "partial bit stream" + * An FPGA image that is designed to be loaded into a PRR. There may be + any number of personas designed to fit into a PRR, but only one at a time + may be loaded. + * A persona may create more regions. + + FPGA Bridge + * FPGA Bridges gate bus signals between a host and FPGA. + * FPGA Bridges should be disabled while the FPGA is being programmed to + prevent spurious signals on the cpu bus and to the soft logic. + * FPGA bridges may be actual hardware or soft logic on an FPGA. + * During Full Reconfiguration, hardware bridges between the host and FPGA + will be disabled. + * During Partial Reconfiguration of a specific region, that region's bridge + will be used to gate the busses. Traffic to other regions is not affected. + * In some implementations, the FPGA Manager transparently handles gating the + buses, eliminating the need to show the hardware FPGA bridges in the + device tree. + * An FPGA image may create a set of reprogrammable regions, each having its + own bridge and its own split of the busses in the FPGA. + + FPGA Manager + * An FPGA Manager is a hardware block that programs an FPGA under the control + of a host processor. + + Base Image + * Also called the "static image" + * An FPGA image that is designed to do full reconfiguration of the FPGA. + * A base image may set up a set of partial reconfiguration regions that may + later be reprogrammed. + + ---------------- ---------------------------------- + | Host CPU | | FPGA | + | | | | + | ----| | ----------- -------- | + | | H | | |==>| Bridge0 |<==>| PRR0 | | + | | W | | | ----------- -------- | + | | | | | | + | | B |<=====>|<==| ----------- -------- | + | | R | | |==>| Bridge1 |<==>| PRR1 | | + | | I | | | ----------- -------- | + | | D | | | | + | | G | | | ----------- -------- | + | | E | | |==>| Bridge2 |<==>| PRR2 | | + | ----| | ----------- -------- | + | | | | + ---------------- ---------------------------------- + + Figure 1: An FPGA set up with a base image that created three regions. Each + region (PRR0-2) gets its own split of the busses that is independently gated by + a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be + reprogrammed independently while the rest of the system continues to function. + + + Sequence + ======== + + When a DT overlay that targets an FPGA Region is applied, the FPGA Region will + do the following: + + 1. Disable appropriate FPGA bridges. + 2. Program the FPGA using the FPGA manager. + 3. Enable the FPGA bridges. + 4. The Device Tree overlay is accepted into the live tree. + 5. Child devices are populated. + + When the overlay is removed, the child nodes will be removed and the FPGA Region + will disable the bridges. + + + FPGA Region + =========== + + FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA + Region brings together the elements needed to program on a running system and + add the child devices: + + * FPGA Manager + * FPGA Bridges + * image-specific information needed to the programming. + * child nodes + + The intended use is that a Device Tree overlay (DTO) can be used to reprogram an + FPGA while an operating system is running. + + An FPGA Region that exists in the live Device Tree reflects the current state. + If the live tree shows a "firmware-name" property or child nodes under an FPGA + Region, the FPGA already has been programmed. A DTO that targets an FPGA Region + and adds the "firmware-name" property is taken as a request to reprogram the + FPGA. After reprogramming is successful, the overlay is accepted into the live + tree. + + The base FPGA Region in the device tree represents the FPGA and supports full + reconfiguration. It must include a phandle to an FPGA Manager. The base + FPGA region will be the child of one of the hardware bridges (the bridge that + allows register access) between the cpu and the FPGA. If there are more than + one bridge to control during FPGA programming, the region will also contain a + list of phandles to the additional hardware FPGA Bridges. + + For partial reconfiguration (PR), each PR region will have an FPGA Region. + These FPGA regions are children of FPGA bridges which are then children of the + base FPGA region. The "Full Reconfiguration to add PRR's" example below shows + this. + + If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA + Manager specified by its ancestor FPGA Region. This supports both the case + where the same FPGA Manager is used for all of an FPGA as well the case where + a different FPGA Manager is used for each region. + + FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents + shutting down bridges that are upstream from the other active regions while one + region is getting reconfigured (see Figure 1 above). During PR, the FPGA's + hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges + within the static image of the FPGA. + + + Supported Use Models + ==================== + + In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and + a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some + uses are specific to an FPGA device. + + * No FPGA Bridges + In this case, the FPGA Manager which programs the FPGA also handles the + bridges behind the scenes. No FPGA Bridge devices are needed for full + reconfiguration. + + * Full reconfiguration with hardware bridges + In this case, there are hardware bridges between the processor and FPGA that + need to be controlled during full reconfiguration. Before the overlay is + applied, the live DT must include the FPGA Manager, FPGA Bridges, and a + FPGA Region. The FPGA Region is the child of the bridge that allows + register access to the FPGA. Additional bridges may be listed in a + fpga-bridges property in the FPGA region or in the device tree overlay. + + * Partial reconfiguration with bridges in the FPGA + In this case, the FPGA will have one or more PRR's that may be programmed + separately while the rest of the FPGA can remain active. To manage this, + bridges need to exist in the FPGA that can gate the buses going to each FPGA + region while the buses are enabled for other sections. Before any partial + reconfiguration can be done, a base FPGA image must be loaded which includes + PRR's with FPGA bridges. The device tree should have an FPGA region for each + PRR. + + Constraints + =========== + + It is beyond the scope of this document to fully describe all the FPGA design + constraints required to make partial reconfiguration work[1] [2] [3], but a few + deserve quick mention. + + A persona must have boundary connections that line up with those of the partition + or region it is designed to go into. + + During programming, transactions through those connections must be stopped and + the connections must be held at a fixed logic level. This can be achieved by + FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. + + -- + [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf + [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf + [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf + +properties: + $nodename: + pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$" + + compatible: + const: fpga-region + + reg: + maxItems: 1 + + ranges: true + "#address-cells": true + "#size-cells": true + + config-complete-timeout-us: + description: + The maximum time in microseconds time for the FPGA to go to operating + mode after the region has been programmed. + + encrypted-fpga-config: + type: boolean + description: + Set if the bitstream is encrypted. + + external-fpga-config: + type: boolean + description: + Set if the FPGA has already been configured prior to OS boot up. + + firmware-name: + maxItems: 1 + description: + Should contain the name of an FPGA image file located on the firmware + search path. If this property shows up in a live device tree it indicates + that the FPGA has already been programmed with this image. + If this property is in an overlay targeting an FPGA region, it is + a request to program the FPGA with that image. + + fpga-bridges: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should contain a list of phandles to FPGA Bridges that must be + controlled during FPGA programming along with the parent FPGA bridge. + This property is optional if the FPGA Manager handles the bridges. + If the fpga-region is the child of an fpga-bridge, the list should not + contain the parent bridge. + + fpga-mgr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Should contain a phandle to an FPGA Manager. Child FPGA Regions + inherit this property from their ancestor regions. An fpga-mgr property + in a region will override any inherited FPGA manager. + + partial-fpga-config: + type: boolean + description: + Set if partial reconfiguration is to be done, otherwise full + reconfiguration is done. + + region-freeze-timeout-us: + description: + The maximum time in microseconds to wait for bridges to successfully + become disabled before the region has been programmed. + + region-unfreeze-timeout-us: + description: + The maximum time in microseconds to wait for bridges to successfully + become enabled after the region has been programmed. + +required: + - compatible + - fpga-mgr + +additionalProperties: + type: object + +examples: + - | + /* + * Full Reconfiguration without Bridges with DT overlay + */ + fpga_region0: fpga-region@0 { + compatible = "fpga-region"; + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + fpga-mgr = <&fpga_mgr0>; + ranges = <0x10000000 0x20000000 0x10000000>; + + /* DT Overlay contains: &fpga_region0 */ + firmware-name = "zynq-gpio.bin"; + gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + - | + /* + * Partial reconfiguration with bridge + */ + fpga_region1: fpga-region@0 { + compatible = "fpga-region"; + reg = <0 0>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + fpga-mgr = <&fpga_mgr1>; + fpga-bridges = <&fpga_bridge1>; + partial-fpga-config; + + /* DT Overlay contains: &fpga_region1 */ + firmware-name = "zynq-gpio-partial.bin"; + clk: clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + #gpio-cells = <2>; + gpio-controller; + clocks = <&clk>; + }; + }; + }; diff --git a/dts/Bindings/fpga/xlnx,versal-fpga.yaml b/dts/Bindings/fpga/xlnx,versal-fpga.yaml index 26f18834ca..80833462f6 100644 --- a/dts/Bindings/fpga/xlnx,versal-fpga.yaml +++ b/dts/Bindings/fpga/xlnx,versal-fpga.yaml @@ -26,7 +26,7 @@ additionalProperties: false examples: - | - versal_fpga: versal_fpga { + versal_fpga: versal-fpga { compatible = "xlnx,versal-fpga"; }; diff --git a/dts/Bindings/gpio/aspeed,ast2400-gpio.yaml b/dts/Bindings/gpio/aspeed,ast2400-gpio.yaml new file mode 100644 index 0000000000..cf11aa7ec8 --- /dev/null +++ b/dts/Bindings/gpio/aspeed,ast2400-gpio.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed GPIO controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +properties: + compatible: + enum: + - aspeed,ast2400-gpio + - aspeed,ast2500-gpio + - aspeed,ast2600-gpio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: The clock to use for debounce timings + + gpio-controller: true + gpio-line-names: + minItems: 36 + maxItems: 232 + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + ngpios: + minimum: 36 + maximum: 232 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: aspeed,ast2400-gpio + then: + properties: + gpio-line-names: + minItems: 220 + maxItems: 220 + ngpios: + const: 220 + - if: + properties: + compatible: + contains: + const: aspeed,ast2500-gpio + then: + properties: + gpio-line-names: + minItems: 232 + maxItems: 232 + ngpios: + const: 232 + - if: + properties: + compatible: + contains: + const: aspeed,ast2600-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 208 + ngpios: + enum: [ 36, 208 ] + required: + - ngpios + +additionalProperties: false + +examples: + - | + gpio@1e780000 { + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + - | + gpio: gpio@1e780000 { + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x200>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 232>; + }; + - | + #include <dt-bindings/clock/ast2600-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + gpio0: gpio@1e780000 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x400>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + }; + gpio1: gpio@1e780800 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + }; diff --git a/dts/Bindings/gpio/gateworks,pld-gpio.txt b/dts/Bindings/gpio/gateworks,pld-gpio.txt index 6e81f8b755..d543fd1b8b 100644 --- a/dts/Bindings/gpio/gateworks,pld-gpio.txt +++ b/dts/Bindings/gpio/gateworks,pld-gpio.txt @@ -1,7 +1,6 @@ Gateworks PLD GPIO controller bindings -The GPIO controller should be a child node on an I2C bus, -see: i2c/i2c.txt for details. +The GPIO controller should be a child node on an I2C bus. Required properties: - compatible: Should be "gateworks,pld-gpio" diff --git a/dts/Bindings/gpio/gpio-aspeed.txt b/dts/Bindings/gpio/gpio-aspeed.txt deleted file mode 100644 index b2033fc3a7..0000000000 --- a/dts/Bindings/gpio/gpio-aspeed.txt +++ /dev/null @@ -1,39 +0,0 @@ -Aspeed GPIO controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio", - or "aspeed,ast2600-gpio". - -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify optional - parameters (unused) - -- reg : Address and length of the register set for the device -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt specifier (see interrupt bindings for - details) -- interrupt-controller : Mark the GPIO controller as an interrupt-controller - -Optional properties: - -- clocks : A phandle to the clock to use for debounce timings -- ngpios : Number of GPIOs controlled by this controller. Should be set - when there are multiple GPIO controllers on a SoC (ast2600). - -The gpio and interrupt properties are further described in their respective -bindings documentation: - -- Documentation/devicetree/bindings/gpio/gpio.txt -- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Example: - gpio@1e780000 { - #gpio-cells = <2>; - compatible = "aspeed,ast2400-gpio"; - gpio-controller; - interrupts = <20>; - reg = <0x1e780000 0x1000>; - interrupt-controller; - }; diff --git a/dts/Bindings/gpio/gpio-mvebu.yaml b/dts/Bindings/gpio/gpio-mvebu.yaml index f1bd1e6b2e..33d4e47165 100644 --- a/dts/Bindings/gpio/gpio-mvebu.yaml +++ b/dts/Bindings/gpio/gpio-mvebu.yaml @@ -115,7 +115,7 @@ allOf: required: - reg -unevaluatedProperties: true +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/gpio/gpio-nmk.txt b/dts/Bindings/gpio/gpio-nmk.txt deleted file mode 100644 index 8315ac7780..0000000000 --- a/dts/Bindings/gpio/gpio-nmk.txt +++ /dev/null @@ -1,31 +0,0 @@ -Nomadik GPIO controller - -Required properties: -- compatible : Should be "st,nomadik-gpio". -- reg : Physical base address and length of the controller's registers. -- interrupts : The interrupt outputs from the controller. -- #gpio-cells : Should be two: - The first cell is the pin number. - The second cell is used to specify optional parameters: - - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- gpio-controller : Marks the device node as a GPIO controller. -- interrupt-controller : Marks the device node as an interrupt controller. -- gpio-bank : Specifies which bank a controller owns. -- st,supports-sleepmode : Specifies whether controller can sleep or not - -Example: - - gpio1: gpio@8012e080 { - compatible = "st,nomadik-gpio"; - reg = <0x8012e080 0x80>; - interrupts = <0 120 0x4>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - st,supports-sleepmode; - gpio-bank = <1>; - }; diff --git a/dts/Bindings/gpio/gpio-pca9570.yaml b/dts/Bindings/gpio/gpio-pca9570.yaml index 452f8972a9..6f73961001 100644 --- a/dts/Bindings/gpio/gpio-pca9570.yaml +++ b/dts/Bindings/gpio/gpio-pca9570.yaml @@ -28,6 +28,9 @@ properties: minItems: 4 maxItems: 8 + label: + description: A descriptive name for this device. + required: - compatible - reg diff --git a/dts/Bindings/gpio/mrvl-gpio.yaml b/dts/Bindings/gpio/mrvl-gpio.yaml index 9cf6137dd5..65155bb701 100644 --- a/dts/Bindings/gpio/mrvl-gpio.yaml +++ b/dts/Bindings/gpio/mrvl-gpio.yaml @@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller maintainers: - Linus Walleij <linus.walleij@linaro.org> - Bartosz Golaszewski <bgolaszewski@baylibre.com> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> allOf: - if: diff --git a/dts/Bindings/gpio/renesas,rcar-gpio.yaml b/dts/Bindings/gpio/renesas,rcar-gpio.yaml index aa424e2b95..cc7a950a60 100644 --- a/dts/Bindings/gpio/renesas,rcar-gpio.yaml +++ b/dts/Bindings/gpio/renesas,rcar-gpio.yaml @@ -53,6 +53,7 @@ properties: - renesas,gpio-r8a779a0 # R-Car V3U - renesas,gpio-r8a779f0 # R-Car S4-8 - renesas,gpio-r8a779g0 # R-Car V4H + - renesas,gpio-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-gpio # R-Car Gen4 reg: diff --git a/dts/Bindings/gpio/st,nomadik-gpio.yaml b/dts/Bindings/gpio/st,nomadik-gpio.yaml new file mode 100644 index 0000000000..38d37d8f72 --- /dev/null +++ b/dts/Bindings/gpio/st,nomadik-gpio.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nomadik GPIO controller + +description: + The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also + been called ST STA2X11. On the Nomadik platform, this driver is intertwined + with pinctrl-nomadik. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + enum: + - st,nomadik-gpio + - mobileye,eyeq5-gpio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + gpio-bank: + description: System-wide GPIO bank index. + $ref: /schemas/types.yaml#/definitions/uint32 + + st,supports-sleepmode: + description: Whether the controller can sleep or not. + $ref: /schemas/types.yaml#/definitions/flag + + clocks: + maxItems: 1 + + gpio-ranges: + maxItems: 1 + + ngpios: + minimum: 0 + maximum: 32 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - "#gpio-cells" + - gpio-controller + - interrupt-controller + - gpio-bank + +unevaluatedProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-gpio + then: + properties: + st,supports-sleepmode: false + +examples: + - | + gpio@8012e080 { + compatible = "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + st,supports-sleepmode; + gpio-bank = <1>; + }; diff --git a/dts/Bindings/gpu/img,powervr.yaml b/dts/Bindings/gpu/img,powervr-rogue.yaml index a13298f1a1..256e252f80 100644 --- a/dts/Bindings/gpu/img,powervr.yaml +++ b/dts/Bindings/gpu/img,powervr-rogue.yaml @@ -2,10 +2,10 @@ # Copyright (c) 2023 Imagination Technologies Ltd. %YAML 1.2 --- -$id: http://devicetree.org/schemas/gpu/img,powervr.yaml# +$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Imagination Technologies PowerVR and IMG GPU +title: Imagination Technologies PowerVR and IMG Rogue GPUs maintainers: - Frank Binns <frank.binns@imgtec.com> diff --git a/dts/Bindings/gpu/img,powervr-sgx.yaml b/dts/Bindings/gpu/img,powervr-sgx.yaml new file mode 100644 index 0000000000..f5898b0438 --- /dev/null +++ b/dts/Bindings/gpu/img,powervr-sgx.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Imagination Technologies Ltd. +# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies PowerVR SGX GPUs + +maintainers: + - Frank Binns <frank.binns@imgtec.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,omap3430-gpu # Rev 121 + - ti,omap3630-gpu # Rev 125 + - const: img,powervr-sgx530 + - items: + - enum: + - ingenic,jz4780-gpu # Rev 130 + - ti,omap4430-gpu # Rev 120 + - const: img,powervr-sgx540 + - items: + - enum: + - allwinner,sun6i-a31-gpu # MP2 Rev 115 + - ti,omap4470-gpu # MP1 Rev 112 + - ti,omap5432-gpu # MP2 Rev 105 + - ti,am5728-gpu # MP2 Rev 116 + - ti,am6548-gpu # MP1 Rev 117 + - const: img,powervr-sgx544 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core + - const: mem + - const: sys + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am6548-gpu + then: + required: + - power-domains + else: + properties: + power-domains: false + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-gpu + - ingenic,jz4780-gpu + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-gpu + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: ingenic,jz4780-gpu + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + gpu@7000000 { + compatible = "ti,am6548-gpu", "img,powervr-sgx544"; + reg = <0x7000000 0x10000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@1c40000 { + compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 1>, <&ccu 2>; + clock-names = "core", "mem"; + }; diff --git a/dts/Bindings/hwmon/adi,adm1177.yaml b/dts/Bindings/hwmon/adi,adm1177.yaml index 2e45364d05..be7e9e91a3 100644 --- a/dts/Bindings/hwmon/adi,adm1177.yaml +++ b/dts/Bindings/hwmon/adi,adm1177.yaml @@ -46,7 +46,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/adi,adm1275.yaml b/dts/Bindings/hwmon/adi,adm1275.yaml index ab87f51c5a..b680612949 100644 --- a/dts/Bindings/hwmon/adi,adm1275.yaml +++ b/dts/Bindings/hwmon/adi,adm1275.yaml @@ -33,10 +33,6 @@ properties: reg: maxItems: 1 - shunt-resistor-micro-ohms: - description: - Shunt resistor value in micro-Ohm. - adi,volt-curr-sample-average: description: | Number of samples to be used to report voltage and current values. @@ -50,6 +46,7 @@ properties: enum: [1, 2, 4, 8, 16, 32, 64, 128] allOf: + - $ref: hwmon-common.yaml# - if: properties: compatible: @@ -107,7 +104,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/adi,ltc2945.yaml b/dts/Bindings/hwmon/adi,ltc2945.yaml index 5cb66e97e8..6401b0a9af 100644 --- a/dts/Bindings/hwmon/adi,ltc2945.yaml +++ b/dts/Bindings/hwmon/adi,ltc2945.yaml @@ -31,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/adi,ltc4282.yaml b/dts/Bindings/hwmon/adi,ltc4282.yaml new file mode 100644 index 0000000000..4854b95a93 --- /dev/null +++ b/dts/Bindings/hwmon/adi,ltc4282.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +description: | + Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf + +properties: + compatible: + enum: + - adi,ltc4282 + + reg: + maxItems: 1 + + vdd-supply: true + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + adi,rsense-nano-ohms: + description: Value of the sense resistor. + + adi,vin-mode-microvolt: + description: + Selects operating range for the Undervoltage, Overvoltage and Foldback + pins. Also for the ADC. Should be set to the nominal input voltage. + enum: [3300000, 5000000, 12000000, 24000000] + default: 12000000 + + adi,fet-bad-timeout-ms: + description: + From the moment a FET bad conditions is present, this property selects the + wait time/timeout for a FET-bad fault to be signaled. Setting this to 0, + disables FET bad faults to be reported. + default: 255 + maximum: 255 + + adi,overvoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,undervoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,current-limit-sense-microvolt: + description: + The current limit sense voltage of the chip is adjustable between + 12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current + on the load. + enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375] + default: 25000 + + adi,overcurrent-retry: + description: + If set, enables the chip to auto-retry 256 timer cycles after an + Overcurrent fault. + type: boolean + + adi,overvoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Overvoltage fault. + It's enabled by default. + type: boolean + + adi,undervoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Undervoltage fault. + It's enabled by default. + type: boolean + + adi,fault-log-enable: + description: + If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written + to the EEPROM when a fault bit transitions high and hence, will be + available after a power cycle (the chip loads the contents of + the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot). + type: boolean + + adi,gpio1-mode: + description: Defines the function of the Pin. It can indicate that power is + good (PULL the pin low when power is not good) or that power is bad (Go + into high-z when power is not good). + $ref: /schemas/types.yaml#/definitions/string + enum: [power_bad, power_good] + default: power_good + + adi,gpio2-mode: + description: Defines the function of the Pin. It can be set as the input for + the ADC or indicating that the MOSFET is in stress (dissipating power). + $ref: /schemas/types.yaml#/definitions/string + enum: [adc_input, stress_fet] + default: adc_input + + adi,gpio3-monitor-enable: + description: If set, gpio3 is set as input for the ADC instead of gpio2. + type: boolean + +allOf: + - if: + required: + - adi,gpio3-monitor-enable + then: + properties: + adi,gpio2-mode: + const: stress_fet + +required: + - compatible + - reg + - adi,rsense-nano-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@50 { + compatible = "adi,ltc4282"; + reg = <0x50>; + adi,rsense-nano-ohms = <500>; + + adi,gpio1-mode = "power_good"; + adi,gpio2-mode = "adc_input"; + }; + }; +... diff --git a/dts/Bindings/hwmon/amphenol,chipcap2.yaml b/dts/Bindings/hwmon/amphenol,chipcap2.yaml new file mode 100644 index 0000000000..17351fdbef --- /dev/null +++ b/dts/Bindings/hwmon/amphenol,chipcap2.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipCap 2 humidity and temperature iio sensor + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +description: | + Relative humidity and temperature sensor on I2C bus. + + Datasheets: + https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2 + +properties: + compatible: + oneOf: + - const: amphenol,cc2d23 + - items: + - enum: + - amphenol,cc2d23s + - amphenol,cc2d25 + - amphenol,cc2d25s + - amphenol,cc2d33 + - amphenol,cc2d33s + - amphenol,cc2d35 + - amphenol,cc2d35s + - const: amphenol,cc2d23 + + reg: + maxItems: 1 + + interrupts: + items: + - description: measurement ready indicator + - description: low humidity alarm + - description: high humidity alarm + + interrupt-names: + items: + - const: ready + - const: low + - const: high + + vdd-supply: + description: + Dedicated, controllable supply-regulator to reset the device and + enter in command mode. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity@28 { + compatible = "amphenol,cc2d23s", "amphenol,cc2d23"; + reg = <0x28>; + interrupt-parent = <&gpio>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>, + <5 IRQ_TYPE_EDGE_RISING>, + <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ready", "low", "high"; + vdd-supply = <®_vdd>; + }; + }; diff --git a/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml b/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml new file mode 100644 index 0000000000..9e5ed901ae --- /dev/null +++ b/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2023 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED G6 PWM and Fan Tach controller + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + The ASPEED PWM controller can support up to 16 PWM outputs. + The ASPEED Fan Tacho controller can support up to 16 fan tach input. + They are independent hardware blocks, which are different from the + previous version of the ASPEED chip. + +properties: + compatible: + enum: + - aspeed,ast2600-pwm-tach + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +patternProperties: + "^fan-[0-9]+$": + $ref: fan-common.yaml# + unevaluatedProperties: false + required: + - tach-ch + +required: + - reg + - clocks + - resets + - "#pwm-cells" + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + pwm_tach: pwm-tach-controller@1e610000 { + compatible = "aspeed,ast2600-pwm-tach"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + #pwm-cells = <3>; + + fan-0 { + tach-ch = /bits/ 8 <0x0>; + pwms = <&pwm_tach 0 40000 0>; + }; + + fan-1 { + tach-ch = /bits/ 8 <0x1 0x2>; + pwms = <&pwm_tach 1 40000 0>; + }; + }; diff --git a/dts/Bindings/hwmon/fan-common.yaml b/dts/Bindings/hwmon/fan-common.yaml new file mode 100644 index 0000000000..0fb7380816 --- /dev/null +++ b/dts/Bindings/hwmon/fan-common.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Fan Properties + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + - Billy Tsai <billy_tsai@aspeedtech.com> + +properties: + max-rpm: + description: + Max RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 100000 + + min-rpm: + description: + Min RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 1000 + + pulses-per-revolution: + description: + The number of pulse from fan sensor per revolution. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4 + + tach-div: + description: + Divisor for the tach sampling clock, which determines the sensitivity of the tach pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + target-rpm: + description: + The default desired fan speed in RPM. + $ref: /schemas/types.yaml#/definitions/uint32 + + fan-driving-mode: + description: + Select the driving mode of the fan.(DC, PWM and so on) + $ref: /schemas/types.yaml#/definitions/string + enum: [ dc, pwm ] + + pwms: + description: + PWM provider. + maxItems: 1 + + "#cooling-cells": + const: 2 + + cooling-levels: + description: + The control value which correspond to thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + + tach-ch: + description: + The tach channel used for the fan. + $ref: /schemas/types.yaml#/definitions/uint8-array + + label: + description: + Optional fan label + + fan-supply: + description: + Power supply for fan. + + reg: + maxItems: 1 + +additionalProperties: true + +... diff --git a/dts/Bindings/hwmon/hwmon-common.yaml b/dts/Bindings/hwmon/hwmon-common.yaml new file mode 100644 index 0000000000..dc86b5c72c --- /dev/null +++ b/dts/Bindings/hwmon/hwmon-common.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware Monitoring Devices Common Properties + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +properties: + label: + description: A descriptive name for this device. + + shunt-resistor-micro-ohms: + description: The value of current sense resistor. + +additionalProperties: true diff --git a/dts/Bindings/hwmon/lltc,ltc4151.yaml b/dts/Bindings/hwmon/lltc,ltc4151.yaml index e62aff6704..8f0095bb7f 100644 --- a/dts/Bindings/hwmon/lltc,ltc4151.yaml +++ b/dts/Bindings/hwmon/lltc,ltc4151.yaml @@ -25,7 +25,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/lltc,ltc4286.yaml b/dts/Bindings/hwmon/lltc,ltc4286.yaml index 98ca163d34..853df9fef6 100644 --- a/dts/Bindings/hwmon/lltc,ltc4286.yaml +++ b/dts/Bindings/hwmon/lltc,ltc4286.yaml @@ -25,15 +25,14 @@ properties: The default is 102.4 volts. type: boolean - shunt-resistor-micro-ohms: - description: - Resistor value micro-ohms. - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/lm75.yaml b/dts/Bindings/hwmon/lm75.yaml index ed269e428a..29bd7460cc 100644 --- a/dts/Bindings/hwmon/lm75.yaml +++ b/dts/Bindings/hwmon/lm75.yaml @@ -57,6 +57,7 @@ required: - reg allOf: + - $ref: hwmon-common.yaml# - if: not: properties: @@ -71,7 +72,7 @@ allOf: properties: interrupts: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/nuvoton,nct6775.yaml b/dts/Bindings/hwmon/nuvoton,nct6775.yaml index 358b262431..e3db642878 100644 --- a/dts/Bindings/hwmon/nuvoton,nct6775.yaml +++ b/dts/Bindings/hwmon/nuvoton,nct6775.yaml @@ -25,6 +25,7 @@ properties: - nuvoton,nct6796 - nuvoton,nct6797 - nuvoton,nct6798 + - nuvoton,nct6799 reg: maxItems: 1 diff --git a/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml b/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml index ded1c11576..5c4e52b472 100644 --- a/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml +++ b/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml @@ -30,6 +30,23 @@ properties: unconnected(has internal pull-down). type: boolean + interrupts: + maxItems: 1 + + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + required: - compatible - reg @@ -38,6 +55,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -45,5 +63,15 @@ examples: tda38640@40 { compatible = "infineon,tda38640"; reg = <0x40>; + + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu0: vout { + regulator-name = "pvnn_main_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; }; }; diff --git a/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml b/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml index da8292bc32..a20f140dc7 100644 --- a/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml +++ b/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml @@ -34,11 +34,26 @@ properties: Shunt (sense) resistor value in micro-Ohms default: 1000 + regulators: + type: object + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/hwmon/hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/ti,ina2xx.yaml b/dts/Bindings/hwmon/ti,ina2xx.yaml index 378d1f6aee..df86c2c920 100644 --- a/dts/Bindings/hwmon/ti,ina2xx.yaml +++ b/dts/Bindings/hwmon/ti,ina2xx.yaml @@ -28,10 +28,14 @@ properties: - ti,ina231 - ti,ina237 - ti,ina238 + - ti,ina260 reg: maxItems: 1 + "#io-channel-cells": + const: 1 + shunt-resistor: description: Shunt resistor value in micro-Ohm. @@ -66,7 +70,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | @@ -77,6 +84,8 @@ examples: power-sensor@44 { compatible = "ti,ina220"; reg = <0x44>; + #io-channel-cells = <1>; + label = "vdd_3v0"; shunt-resistor = <1000>; vs-supply = <&vdd_3v0>; }; diff --git a/dts/Bindings/hwmon/ti,tmp513.yaml b/dts/Bindings/hwmon/ti,tmp513.yaml index cdd1489e0c..227858e760 100644 --- a/dts/Bindings/hwmon/ti,tmp513.yaml +++ b/dts/Bindings/hwmon/ti,tmp513.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/ti,tps23861.yaml b/dts/Bindings/hwmon/ti,tps23861.yaml index ebc8d466c1..f58248c29e 100644 --- a/dts/Bindings/hwmon/ti,tps23861.yaml +++ b/dts/Bindings/hwmon/ti,tps23861.yaml @@ -35,7 +35,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/i2c/atmel,at91sam-i2c.yaml b/dts/Bindings/i2c/atmel,at91sam-i2c.yaml index 6adedd3ec3..b1c13bab24 100644 --- a/dts/Bindings/i2c/atmel,at91sam-i2c.yaml +++ b/dts/Bindings/i2c/atmel,at91sam-i2c.yaml @@ -25,7 +25,9 @@ properties: - atmel,sama5d2-i2c - microchip,sam9x60-i2c - items: - - const: microchip,sama7g5-i2c + - enum: + - microchip,sama7g5-i2c + - microchip,sam9x7-i2c - const: microchip,sam9x60-i2c reg: diff --git a/dts/Bindings/i2c/i2c-demux-pinctrl.yaml b/dts/Bindings/i2c/i2c-demux-pinctrl.yaml index 2c08f2a7cf..b813f6d481 100644 --- a/dts/Bindings/i2c/i2c-demux-pinctrl.yaml +++ b/dts/Bindings/i2c/i2c-demux-pinctrl.yaml @@ -32,7 +32,6 @@ description: | +-------------------------------+ allOf: - - $ref: i2c-mux.yaml - $ref: /schemas/i2c/i2c-controller.yaml# properties: @@ -41,6 +40,8 @@ properties: i2c-parent: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of phandles of I2C masters available for selection. The first one will be used as default. diff --git a/dts/Bindings/i2c/i2c-exynos5.yaml b/dts/Bindings/i2c/i2c-exynos5.yaml index df9c57bca2..cc8bba5537 100644 --- a/dts/Bindings/i2c/i2c-exynos5.yaml +++ b/dts/Bindings/i2c/i2c-exynos5.yaml @@ -33,6 +33,7 @@ properties: - const: samsung,exynos7-hsi2c - items: - enum: + - google,gs101-hsi2c - samsung,exynos850-hsi2c - const: samsung,exynosautov9-hsi2c - const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420 diff --git a/dts/Bindings/i2c/i2c-imx-lpi2c.yaml b/dts/Bindings/i2c/i2c-imx-lpi2c.yaml index 4656f5112b..54d500be6a 100644 --- a/dts/Bindings/i2c/i2c-imx-lpi2c.yaml +++ b/dts/Bindings/i2c/i2c-imx-lpi2c.yaml @@ -24,6 +24,7 @@ properties: - fsl,imx8qm-lpi2c - fsl,imx8ulp-lpi2c - fsl,imx93-lpi2c + - fsl,imx95-lpi2c - const: fsl,imx7ulp-lpi2c reg: diff --git a/dts/Bindings/i2c/i2c-mpc.yaml b/dts/Bindings/i2c/i2c-mpc.yaml index 70fb69b923..b1d7d14c0b 100644 --- a/dts/Bindings/i2c/i2c-mpc.yaml +++ b/dts/Bindings/i2c/i2c-mpc.yaml @@ -96,6 +96,6 @@ examples: interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; - i2c-scl-clk-low-timeout-us = <10000>; + i2c-transfer-timeout-us = <10000>; }; ... diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.yaml b/dts/Bindings/i2c/i2c-mux-pca954x.yaml index 2d7bb998b0..9aa0585200 100644 --- a/dts/Bindings/i2c/i2c-mux-pca954x.yaml +++ b/dts/Bindings/i2c/i2c-mux-pca954x.yaml @@ -71,6 +71,23 @@ properties: description: A voltage regulator supplying power to the chip. On PCA9846 the regulator supplies power to VDD2 (core logic) and optionally to VDD1. + maxim,isolate-stuck-channel: + type: boolean + description: Allows to use non faulty channels while a stuck channel is + isolated from the upstream bus. If not set all channels are isolated from + the upstream bus until the fault is cleared. + + maxim,send-flush-out-sequence: + type: boolean + description: Send a flush-out sequence to stuck auxiliary buses + automatically after a stuck channel is being detected. + + maxim,preconnection-wiggle-test-enable: + type: boolean + description: Send a STOP condition to the auxiliary buses when the switch + register activates a channel to detect a stuck high fault. On fault the + channel is isolated from the upstream bus. + required: - compatible - reg @@ -95,6 +112,19 @@ allOf: "#interrupt-cells": false interrupt-controller: false + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7357 + then: + properties: + maxim,isolate-stuck-channel: false + maxim,send-flush-out-sequence: false + maxim,preconnection-wiggle-test-enable: false + unevaluatedProperties: false examples: diff --git a/dts/Bindings/i2c/i2c-pxa.yaml b/dts/Bindings/i2c/i2c-pxa.yaml index 31386a8d76..e89ee36174 100644 --- a/dts/Bindings/i2c/i2c-pxa.yaml +++ b/dts/Bindings/i2c/i2c-pxa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell MMP I2C controller maintainers: - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt deleted file mode 100644 index fc3dd7ec04..0000000000 --- a/dts/Bindings/i2c/i2c.txt +++ /dev/null @@ -1,151 +0,0 @@ -Generic device tree bindings for I2C busses -=========================================== - -This document describes generic bindings which can be used to describe I2C -busses and their child devices in a device tree. - -Required properties (per bus) ------------------------------ - -- #address-cells - should be <1>. Read more about addresses below. -- #size-cells - should be <0>. -- compatible - name of I2C bus controller - -For other required properties e.g. to describe register sets, -clocks, etc. check the binding documentation of the specific driver. - -The cells properties above define that an address of children of an I2C bus -are described by a single value. - -Optional properties (per bus) ------------------------------ - -These properties may not be supported by all drivers. However, if a driver -wants to support one of the below features, it should adapt these bindings. - -- clock-frequency - frequency of bus clock in Hz. - -- i2c-bus - For I2C adapters that have child nodes that are a mixture of both I2C - devices and non-I2C devices, the 'i2c-bus' subnode can be used for - populating I2C devices. If the 'i2c-bus' subnode is present, only - subnodes of this will be considered as I2C slaves. The properties, - '#address-cells' and '#size-cells' must be defined under this subnode - if present. - -- i2c-scl-falling-time-ns - Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C - specification. - -- i2c-scl-internal-delay-ns - Number of nanoseconds the IP core additionally needs to setup SCL. - -- i2c-scl-rising-time-ns - Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C - specification. - -- i2c-sda-falling-time-ns - Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C - specification. - -- i2c-analog-filter - Enable analog filter for i2c lines. - -- i2c-digital-filter - Enable digital filter for i2c lines. - -- i2c-digital-filter-width-ns - Width of spikes which can be filtered by digital filter - (i2c-digital-filter). This width is specified in nanoseconds. - -- i2c-analog-filter-cutoff-frequency - Frequency that the analog filter (i2c-analog-filter) uses to distinguish - which signal to filter. Signal with higher frequency than specified will - be filtered out. Only lower frequency will pass (this is applicable to - a low-pass analog filter). Typical value should be above the normal - i2c bus clock frequency (clock-frequency). - Specified in Hz. - -- multi-master - states that there is another master active on this bus. The OS can use - this information to adapt power management to keep the arbitration awake - all the time, for example. Can not be combined with 'single-master'. - -- pinctrl - add extra pinctrl to configure SCL/SDA pins to GPIO function for bus - recovery, call it "gpio" or "recovery" (deprecated) state - -- scl-gpios - specify the gpio related to SCL pin. Used for GPIO bus recovery. - -- sda-gpios - specify the gpio related to SDA pin. Optional for GPIO bus recovery. - -- single-master - states that there is no other master active on this bus. The OS can use - this information to detect a stalled bus more reliably, for example. - Can not be combined with 'multi-master'. - -- smbus - states that additional SMBus restrictions and features apply to this bus. - An example of feature is SMBusHostNotify. Examples of restrictions are - more reserved addresses and timeout definitions. - -- smbus-alert - states that the optional SMBus-Alert feature apply to this bus. - -- mctp-controller - indicates that the system is accessible via this bus as an endpoint for - MCTP over I2C transport. - -Required properties (per child device) --------------------------------------- - -- compatible - name of I2C slave device - -- reg - One or many I2C slave addresses. These are usually a 7 bit addresses. - However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is - used to mark a 10 bit address. It is needed to avoid the ambiguity - between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050 - which, in theory, can be on the same bus. - Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we - listen to be devices ourselves. - -Optional properties (per child device) --------------------------------------- - -These properties may not be supported by all drivers. However, if a driver -wants to support one of the below features, it should adapt these bindings. - -- host-notify - device uses SMBus host notify protocol instead of interrupt line. - -- interrupts - interrupts used by the device. - -- interrupt-names - "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, - other names are left to individual drivers. - -- reg-names - Names of map programmable addresses. - It can contain any map needing another address than default one. - -- wakeup-source - device can be used as a wakeup source. - -Binding may contain optional "interrupts" property, describing interrupts -used by the device. I2C core will assign "irq" interrupt (or the very first -interrupt if not using interrupt names) as primary interrupt for the slave. - -Alternatively, devices supporting SMBus Host Notify, and connected to -adapters that support this feature, may use "host-notify" property. I2C -core will create a virtual interrupt for Host Notify and assign it as -primary interrupt for the slave. - -Also, if device is marked as a wakeup source, I2C core will set up "wakeup" -interrupt for the device. If "wakeup" interrupt name is not present in the -binding, then primary interrupt will be used as wakeup interrupt. diff --git a/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml index b8319dcf3d..8676335e9e 100644 --- a/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml +++ b/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml @@ -21,8 +21,7 @@ description: | See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP binding. - This node represents an I2C controller. See ../i2c/i2c.txt for details - of the core I2C binding. + This node represents an I2C controller. properties: compatible: diff --git a/dts/Bindings/i2c/qcom,i2c-cci.yaml b/dts/Bindings/i2c/qcom,i2c-cci.yaml index 8386cfe215..f0eabff863 100644 --- a/dts/Bindings/i2c/qcom,i2c-cci.yaml +++ b/dts/Bindings/i2c/qcom,i2c-cci.yaml @@ -270,7 +270,7 @@ examples: port { ov7251_ep: endpoint { - data-lanes = <0 1>; + data-lanes = <0>; link-frequencies = /bits/ 64 <240000000 319200000>; remote-endpoint = <&csiphy3_ep>; }; diff --git a/dts/Bindings/i2c/renesas,rcar-i2c.yaml b/dts/Bindings/i2c/renesas,rcar-i2c.yaml index c4ace5585e..51b220da46 100644 --- a/dts/Bindings/i2c/renesas,rcar-i2c.yaml +++ b/dts/Bindings/i2c/renesas,rcar-i2c.yaml @@ -53,6 +53,7 @@ properties: - renesas,i2c-r8a779a0 # R-Car V3U - renesas,i2c-r8a779f0 # R-Car S4-8 - renesas,i2c-r8a779g0 # R-Car V4H + - renesas,i2c-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-i2c # R-Car Gen4 reg: diff --git a/dts/Bindings/i2c/st,nomadik-i2c.yaml b/dts/Bindings/i2c/st,nomadik-i2c.yaml index 16024415a4..44c54b162b 100644 --- a/dts/Bindings/i2c/st,nomadik-i2c.yaml +++ b/dts/Bindings/i2c/st,nomadik-i2c.yaml @@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST maintainers: - Linus Walleij <linus.walleij@linaro.org> -allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# - # Need a custom select here or 'arm,primecell' will match on lots of nodes select: properties: @@ -24,21 +21,23 @@ select: contains: enum: - st,nomadik-i2c + - mobileye,eyeq5-i2c required: - compatible properties: compatible: oneOf: - # The variant found in STn8815 - items: - const: st,nomadik-i2c - const: arm,primecell - # The variant found in DB8500 - items: - const: stericsson,db8500-i2c - const: st,nomadik-i2c - const: arm,primecell + - items: + - const: mobileye,eyeq5-i2c + - const: arm,primecell reg: maxItems: 1 @@ -55,7 +54,7 @@ properties: - items: - const: mclk - const: apb_pclk - # Clock name in DB8500 + # Clock name in DB8500 or EyeQ5 - items: - const: i2cclk - const: apb_pclk @@ -70,6 +69,16 @@ properties: minimum: 1 maximum: 400000 + mobileye,olb: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to OLB system controller node. + - description: Platform-wide controller ID (integer starting from zero). + description: + The phandle pointing to OLB system controller node, with the I2C + controller index. + required: - compatible - reg @@ -79,6 +88,20 @@ required: unevaluatedProperties: false +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-i2c + then: + required: + - mobileye,olb + else: + properties: + mobileye,olb: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -111,5 +134,19 @@ examples: clocks = <&i2c0clk>, <&pclki2c0>; clock-names = "mclk", "apb_pclk"; }; + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + i2c@300000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0x300000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb 0>; + }; ... diff --git a/dts/Bindings/i3c/aspeed,ast2600-i3c.yaml b/dts/Bindings/i3c/aspeed,ast2600-i3c.yaml index fcc3dbff9c..47be5d9a32 100644 --- a/dts/Bindings/i3c/aspeed,ast2600-i3c.yaml +++ b/dts/Bindings/i3c/aspeed,ast2600-i3c.yaml @@ -57,7 +57,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i3c-master@2000 { + i3c@2000 { compatible = "aspeed,ast2600-i3c"; reg = <0x2000 0x1000>; #address-cells = <3>; diff --git a/dts/Bindings/i3c/cdns,i3c-master.yaml b/dts/Bindings/i3c/cdns,i3c-master.yaml index cc40d25358..cad6d53d0e 100644 --- a/dts/Bindings/i3c/cdns,i3c-master.yaml +++ b/dts/Bindings/i3c/cdns,i3c-master.yaml @@ -41,7 +41,7 @@ unevaluatedProperties: false examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/dts/Bindings/i3c/i3c.yaml b/dts/Bindings/i3c/i3c.yaml index c816e295d5..113957ebe9 100644 --- a/dts/Bindings/i3c/i3c.yaml +++ b/dts/Bindings/i3c/i3c.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^i3c-master@[0-9a-f]+$" + pattern: "^i3c@[0-9a-f]+$" "#address-cells": const: 3 @@ -71,7 +71,7 @@ patternProperties: description: | I2C child, should be named: <device-type>@<i2c-address> - All properties described in Documentation/devicetree/bindings/i2c/i2c.txt + All properties described in dtschema schemas/i2c/i2c-controller.yaml are valid here, except the reg property whose content is changed. properties: @@ -153,7 +153,7 @@ additionalProperties: true examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/dts/Bindings/i3c/mipi-i3c-hci.yaml b/dts/Bindings/i3c/mipi-i3c-hci.yaml index 5dda8cb44c..39bb1a1784 100644 --- a/dts/Bindings/i3c/mipi-i3c-hci.yaml +++ b/dts/Bindings/i3c/mipi-i3c-hci.yaml @@ -43,7 +43,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "mipi-i3c-hci"; reg = <0xa0000000 0x2000>; interrupts = <89>; diff --git a/dts/Bindings/i3c/silvaco,i3c-master.yaml b/dts/Bindings/i3c/silvaco,i3c-master.yaml index 133855f11b..c56ff77677 100644 --- a/dts/Bindings/i3c/silvaco,i3c-master.yaml +++ b/dts/Bindings/i3c/silvaco,i3c-master.yaml @@ -48,7 +48,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "silvaco,i3c-master-v1"; clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>; clock-names = "pclk", "fast_clk", "slow_clk"; diff --git a/dts/Bindings/i3c/snps,dw-i3c-master.yaml b/dts/Bindings/i3c/snps,dw-i3c-master.yaml index 7a76fd3296..c0e805e531 100644 --- a/dts/Bindings/i3c/snps,dw-i3c-master.yaml +++ b/dts/Bindings/i3c/snps,dw-i3c-master.yaml @@ -35,7 +35,7 @@ unevaluatedProperties: false examples: - | - i3c-master@2000 { + i3c@2000 { compatible = "snps,dw-i3c-master-1.00a"; #address-cells = <3>; #size-cells = <0>; diff --git a/dts/Bindings/iio/adc/adc.yaml b/dts/Bindings/iio/adc/adc.yaml index 2616017297..36775f8f71 100644 --- a/dts/Bindings/iio/adc/adc.yaml +++ b/dts/Bindings/iio/adc/adc.yaml @@ -22,7 +22,6 @@ properties: maxItems: 1 label: - $ref: /schemas/types.yaml#/definitions/string description: Unique name to identify which channel this is. bipolar: diff --git a/dts/Bindings/iio/adc/adi,ad9467.yaml b/dts/Bindings/iio/adc/adi,ad9467.yaml index 7aa748d6b7..eecd5fbab6 100644 --- a/dts/Bindings/iio/adc/adi,ad9467.yaml +++ b/dts/Bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -68,6 +71,7 @@ examples: reg = <0>; clocks = <&adc_clk>; clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ... diff --git a/dts/Bindings/iio/adc/adi,axi-adc.yaml b/dts/Bindings/iio/adc/adi,axi-adc.yaml index 9996dd93f8..3d49d21ad3 100644 --- a/dts/Bindings/iio/adc/adi,axi-adc.yaml +++ b/dts/Bindings/iio/adc/adi,axi-adc.yaml @@ -39,12 +39,15 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 required: - compatible - dmas - reg - - adi,adc-dev additionalProperties: false @@ -55,7 +58,6 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; - - adi,adc-dev = <&spi_adc>; + #io-backend-cells = <0>; }; ... diff --git a/dts/Bindings/iio/adc/microchip,pac1934.yaml b/dts/Bindings/iio/adc/microchip,pac1934.yaml new file mode 100644 index 0000000000..47a11a9ac9 --- /dev/null +++ b/dts/Bindings/iio/adc/microchip,pac1934.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1934 Power Monitors with Accumulator + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + This device is part of the Microchip family of Power Monitors with + Accumulator. + The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + +properties: + compatible: + enum: + - microchip,pac1931 + - microchip,pac1932 + - microchip,pac1933 + - microchip,pac1934 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + slow-io-gpios: + description: + A GPIO used to trigger a change is sampling rate (lowering the chip power + consumption). If configured in SLOW mode, if this pin is forced high, + sampling rate is forced to eight samples/second. When it is forced low, + the sampling rate is 1024 samples/second unless a different sample rate + has been programmed. + +patternProperties: + "^channel@[1-4]+$": + type: object + $ref: adc.yaml + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 4 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + required: + - reg + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <24900000>; + label = "CPU"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <49900000>; + label = "GPU"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <75000000>; + label = "MEM"; + bipolar; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <100000000>; + label = "NET"; + bipolar; + }; + }; + }; + +... diff --git a/dts/Bindings/iio/adc/nxp,imx93-adc.yaml b/dts/Bindings/iio/adc/nxp,imx93-adc.yaml index dacc526dc6..dfc3f51291 100644 --- a/dts/Bindings/iio/adc/nxp,imx93-adc.yaml +++ b/dts/Bindings/iio/adc/nxp,imx93-adc.yaml @@ -31,7 +31,6 @@ properties: - description: normal conversion, include EOC (End of Conversion), ECH (End of Chain), JEOC (End of Injected Conversion) and JECH (End of injected Chain). - - description: Self-testing Interrupts. clocks: maxItems: 1 @@ -70,8 +69,7 @@ examples: reg = <0x44530000 0x10000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_ADC1_GATE>; clock-names = "ipg"; vref-supply = <®_vref_1v8>; diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml index 40fa0710f1..c28db0d635 100644 --- a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml @@ -75,7 +75,6 @@ patternProperties: in the PMIC-specific files in include/dt-bindings/iio/. label: - $ref: /schemas/types.yaml#/definitions/string description: | ADC input of the platform as seen in the schematics. For thermistor inputs connected to generic AMUX or GPIO inputs diff --git a/dts/Bindings/iio/adc/richtek,rtq6056.yaml b/dts/Bindings/iio/adc/richtek,rtq6056.yaml index 88e008629e..af2c3a67f8 100644 --- a/dts/Bindings/iio/adc/richtek,rtq6056.yaml +++ b/dts/Bindings/iio/adc/richtek,rtq6056.yaml @@ -25,7 +25,14 @@ description: | properties: compatible: - const: richtek,rtq6056 + oneOf: + - enum: + - richtek,rtq6056 + - richtek,rtq6059 + - items: + - enum: + - richtek,rtq6053 + - const: richtek,rtq6056 reg: maxItems: 1 diff --git a/dts/Bindings/iio/adc/ti,ads1298.yaml b/dts/Bindings/iio/adc/ti,ads1298.yaml new file mode 100644 index 0000000000..bf5a43a81d --- /dev/null +++ b/dts/Bindings/iio/adc/ti,ads1298.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ads1298 medical ADC chips + +description: | + Datasheet at: https://www.ti.com/product/ADS1298 + Bindings for this chip aren't complete. + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +properties: + compatible: + enum: + - ti,ads1298 + + reg: + maxItems: 1 + + spi-cpha: true + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: + Analog power supply, voltage between AVDD and AVSS. When providing a + symmetric +/- 2.5V, the regulator should report 5V. + + vref-supply: + description: + Optional reference voltage. If omitted, internal reference is used, + which is 2.4V when analog supply is below 4.4V, 4V otherwise. + + clocks: + description: Optional 2.048 MHz external source clock on CLK pin + maxItems: 1 + + interrupts: + description: Interrupt on DRDY pin, triggers on falling edge + maxItems: 1 + + label: true + +required: + - compatible + - reg + - avdd-supply + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@1 { + reg = <1>; + compatible = "ti,ads1298"; + label = "ads1298-1-ecg"; + avdd-supply = <®_iso_5v_a>; + clocks = <&clk_ads1298>; + interrupt-parent = <&gpio0>; + interrupts = <78 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <20000000>; + spi-cpha; + }; + }; +... diff --git a/dts/Bindings/iio/afe/voltage-divider.yaml b/dts/Bindings/iio/afe/voltage-divider.yaml index dddf97b505..4151f99b42 100644 --- a/dts/Bindings/iio/afe/voltage-divider.yaml +++ b/dts/Bindings/iio/afe/voltage-divider.yaml @@ -39,6 +39,17 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage + output channel, the voltage divider can act as a provider of + measurement services to other devices. This is particularly + useful in scenarios wherein an ADC has an analog frontend, + such as a voltage divider, and then consuming its raw value + isn't interesting. In this case, the voltage before the divider + is desired. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. diff --git a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml index 67de9d4e3a..3a470459b9 100644 --- a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml @@ -21,6 +21,8 @@ description: | HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf properties: compatible: @@ -28,16 +30,55 @@ properties: - adi,adrf5740 - adi,hmc425a - adi,hmc540s + - adi,ltc6373 vcc-supply: true ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + LTC6373 - 3 GPIO connected to A0-A2 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + - if: + properties: + compatible: + contains: + const: adi,ltc6373 + then: + properties: + ctrl-gpios: + minItems: 3 + maxItems: 3 + required: - compatible - ctrl-gpios diff --git a/dts/Bindings/iio/frequency/adi,admfm2000.yaml b/dts/Bindings/iio/frequency/adi,admfm2000.yaml new file mode 100644 index 0000000000..2bcf4bbc12 --- /dev/null +++ b/dts/Bindings/iio/frequency/adi,admfm2000.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMFM2000 Dual Microwave Down Converter + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: + Dual microwave down converter module with input RF and LO frequency ranges + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down + conversion path. + +properties: + compatible: + enum: + - adi,admfm2000 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of the device. + + additionalProperties: false + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 1 + + adi,mixer-mode: + description: + Enable mixer mode for the channel. It downconverts RF between 5 GHz + and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel + is in direct IF mode which bypasses the mixer and downconverts RF + between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz. + type: boolean + + switch-gpios: + description: | + GPIOs to select the RF path for the channel. The same state of CTRL-A + and CTRL-B GPIOs is not permitted. + CTRL-A CTRL-B CH1 Status CH2 Status + 1 0 Direct IF mode Mixer mode + 0 1 Mixer mode Direct IF mode + + items: + - description: CTRL-A GPIO + - description: CTRL-B GPIO + + attenuation-gpios: + description: | + Choice of attenuation: + DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0 + 1 1 1 1 1 0 dB + 1 1 1 1 0 -1 dB + 1 1 1 0 1 -2 dB + 1 1 0 1 1 -4 dB + 1 0 1 1 1 -8 dB + 0 1 1 1 1 -16 dB + 0 0 0 0 0 -31 dB + + items: + - description: DSA-V0 GPIO + - description: DSA-V1 GPIO + - description: DSA-V2 GPIO + - description: DSA-V3 GPIO + - description: DSA-V4 GPIO + + required: + - reg + - switch-gpios + - attenuation-gpios + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + converter { + compatible = "adi,admfm2000"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>, + <&gpio 22 GPIO_ACTIVE_LOW>, + <&gpio 23 GPIO_ACTIVE_LOW>, + <&gpio 24 GPIO_ACTIVE_LOW>, + <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + channel@1 { + reg = <1>; + adi,mixer-mode; + switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>, + <&gpio 16 GPIO_ACTIVE_LOW>, + <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml index 1414ba9977..3c6fe74af0 100644 --- a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml @@ -22,6 +22,9 @@ properties: vdd-supply: true vddio-supply: true + spi-max-frequency: + maximum: 10000000 + interrupts: minItems: 1 maxItems: 2 @@ -33,7 +36,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/health/maxim,max30102.yaml b/dts/Bindings/iio/health/maxim,max30102.yaml index c13c10c8d6..eed0df9d3a 100644 --- a/dts/Bindings/iio/health/maxim,max30102.yaml +++ b/dts/Bindings/iio/health/maxim,max30102.yaml @@ -42,7 +42,7 @@ allOf: properties: compatible: contains: - const: maxim,max30100 + const: maxim,max30102 then: properties: maxim,green-led-current-microamp: false diff --git a/dts/Bindings/iio/humidity/ti,hdc2010.yaml b/dts/Bindings/iio/humidity/ti,hdc2010.yaml index 79e75a8675..e3eca89175 100644 --- a/dts/Bindings/iio/humidity/ti,hdc2010.yaml +++ b/dts/Bindings/iio/humidity/ti,hdc2010.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/iio/humidity/ti,hdc3020.yaml b/dts/Bindings/iio/humidity/ti,hdc3020.yaml index 7f6d0f9edc..8b5dedd1a5 100644 --- a/dts/Bindings/iio/humidity/ti,hdc3020.yaml +++ b/dts/Bindings/iio/humidity/ti,hdc3020.yaml @@ -43,6 +43,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -51,5 +52,7 @@ examples: compatible = "ti,hdc3021", "ti,hdc3020"; reg = <0x47>; vdd-supply = <&vcc_3v3>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/dts/Bindings/iio/imu/st,lsm6dsx.yaml b/dts/Bindings/iio/imu/st,lsm6dsx.yaml index 28b667a9cb..c48a96d17f 100644 --- a/dts/Bindings/iio/imu/st,lsm6dsx.yaml +++ b/dts/Bindings/iio/imu/st,lsm6dsx.yaml @@ -35,7 +35,9 @@ properties: - st,lsm6dsv - st,lsm6dso16is - items: - - const: st,asm330lhhx + - enum: + - st,asm330lhhx + - st,asm330lhhxg1 - const: st,lsm6dsr - items: - const: st,lsm6dstx diff --git a/dts/Bindings/iio/light/ams,as73211.yaml b/dts/Bindings/iio/light/ams,as73211.yaml index 0e8cd02759..062a038aa0 100644 --- a/dts/Bindings/iio/light/ams,as73211.yaml +++ b/dts/Bindings/iio/light/ams,as73211.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor maintainers: - Christian Eggers <ceggers@arri.de> description: | - XYZ True Color Sensor with I2C Interface + AMS AS73211 XYZ True Color Sensor with I2C Interface https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface + https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf properties: compatible: enum: - ams,as73211 + - ams,as7331 reg: description: diff --git a/dts/Bindings/iio/light/vishay,veml6075.yaml b/dts/Bindings/iio/light/vishay,veml6075.yaml index abee04cd12..91c318746b 100644 --- a/dts/Bindings/iio/light/vishay,veml6075.yaml +++ b/dts/Bindings/iio/light/vishay,veml6075.yaml @@ -21,6 +21,7 @@ properties: required: - compatible - reg + - vdd-supply additionalProperties: false diff --git a/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml b/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml new file mode 100644 index 0000000000..b6ab01a691 --- /dev/null +++ b/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltafield AF8133J magnetometer sensor + +maintainers: + - Ondřej Jirman <megi@xff.cz> + +properties: + compatible: + const: voltafield,af8133j + + reg: + maxItems: 1 + + reset-gpios: + description: + A signal for active low reset input of the sensor. (optional; if not + used, software reset over I2C will be used instead) + + avdd-supply: + description: + A regulator that provides AVDD power (Working power, usually 3.3V) to + the sensor. + + dvdd-supply: + description: + A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD) + to the sensor. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@1c { + compatible = "voltafield,af8133j"; + reg = <0x1c>; + avdd-supply = <®_dldo1>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml index 65a24ed67b..89977b9f01 100644 --- a/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml +++ b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -99,6 +99,9 @@ required: - honeywell,transfer-function - honeywell,pressure-triplet +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + additionalProperties: false dependentSchemas: diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml index d9e903fbfd..6994b30015 100644 --- a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor maintainers: - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> description: | Honeywell pressure sensor of model mprls0025pa. - This sensor has an I2C and SPI interface. Only the I2C interface is - implemented. + This sensor has an I2C and SPI interface. There are many models with different pressure ranges available. The vendor calls them "mpr series". All of them have the identical programming model and differ in the pressure range, unit and transfer function. - To support different models one need to specify the pressure range as well as - the transfer function. Pressure range needs to be converted from its unit to - pascal. + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. The transfer function defines the ranges of numerical values delivered by the - sensor. The minimal range value stands for the minimum pressure and the - maximum value also for the maximum pressure with linear relation inside the - range. + sensor. Specifications about the devices can be found at: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ @@ -42,6 +45,10 @@ properties: maxItems: 1 interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. maxItems: 1 reset-gpios: @@ -50,14 +57,6 @@ properties: If not present the device is not reset during the probe. maxItems: 1 - honeywell,pmin-pascal: - description: - Minimum pressure value the sensor can measure in pascal. - - honeywell,pmax-pascal: - description: - Maximum pressure value the sensor can measure in pascal. - honeywell,transfer-function: description: | Transfer function which defines the range of valid values delivered by the @@ -65,19 +64,57 @@ properties: 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] $ref: /schemas/types.yaml#/definitions/uint32 + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + vdd-supply: description: provide VDD power to the sensor. required: - compatible - reg - - honeywell,pmin-pascal - - honeywell,pmax-pascal - honeywell,transfer-function - vdd-supply +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + additionalProperties: false examples: @@ -93,10 +130,29 @@ examples: reg = <0x18>; reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_EDGE_FALLING>; - honeywell,pmin-pascal = <0>; - honeywell,pmax-pascal = <172369>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; honeywell,transfer-function = <1>; vdd-supply = <&vcc_3v3>; }; }; +... diff --git a/dts/Bindings/iio/temperature/ti,tmp117.yaml b/dts/Bindings/iio/temperature/ti,tmp117.yaml index 8c6d7735e8..58aa154277 100644 --- a/dts/Bindings/iio/temperature/ti,tmp117.yaml +++ b/dts/Bindings/iio/temperature/ti,tmp117.yaml @@ -24,9 +24,16 @@ properties: reg: maxItems: 1 + vcc-supply: + description: provide VCC power to the sensor. + + label: + description: Unique name to identify which device this is. + required: - compatible - reg + - vcc-supply additionalProperties: false @@ -39,5 +46,6 @@ examples: tmp117@48 { compatible = "ti,tmp117"; reg = <0x48>; + vcc-supply = <&pmic_reg_3v3>; }; }; diff --git a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5efceb3138..c384bf0bb2 100644 --- a/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/dts/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -49,7 +49,6 @@ patternProperties: $ref: input.yaml# properties: label: - $ref: /schemas/types.yaml#/definitions/string description: Descriptive name of the key linux,code: true diff --git a/dts/Bindings/input/atmel,captouch.txt b/dts/Bindings/input/atmel,captouch.txt deleted file mode 100644 index fe9ee5c53b..0000000000 --- a/dts/Bindings/input/atmel,captouch.txt +++ /dev/null @@ -1,36 +0,0 @@ -Device tree bindings for Atmel capacitive touch device, typically -an Atmel touch sensor connected to AtmegaXX MCU running firmware -based on Qtouch library. - -The node for this device must be a child of a I2C controller node, as the -device communicates via I2C. - -Required properties: - - compatible: Must be "atmel,captouch". - reg: The I2C slave address of the device. - interrupts: Property describing the interrupt line the device - is connected to. The device only has one interrupt - source. - linux,keycodes: Specifies an array of numeric keycode values to - be used for reporting button presses. The array can - contain up to 8 entries. - -Optional properties: - - autorepeat: Enables the Linux input system's autorepeat - feature on the input device. - -Example: - - atmel-captouch@51 { - compatible = "atmel,captouch"; - reg = <0x51>; - interrupt-parent = <&tlmm>; - interrupts = <67 IRQ_TYPE_EDGE_FALLING>; - linux,keycodes = <BTN_0>, <BTN_1>, - <BTN_2>, <BTN_3>, - <BTN_4>, <BTN_5>, - <BTN_6>, <BTN_7>; - autorepeat; - }; diff --git a/dts/Bindings/input/atmel,captouch.yaml b/dts/Bindings/input/atmel,captouch.yaml new file mode 100644 index 0000000000..f7477091d5 --- /dev/null +++ b/dts/Bindings/input/atmel,captouch.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/atmel,captouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel capacitive touch device + +maintainers: + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + Atmel capacitive touch device, typically an Atmel touch sensor connected to + AtmegaXX MCU running firmware based on Qtouch library. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: atmel,captouch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - linux,keycodes + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touch@51 { + compatible = "atmel,captouch"; + reg = <0x51>; + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + linux,keycodes = <BTN_0>, <BTN_1>, + <BTN_2>, <BTN_3>, + <BTN_4>, <BTN_5>, + <BTN_6>, <BTN_7>; + autorepeat; + }; + }; diff --git a/dts/Bindings/input/da9062-onkey.txt b/dts/Bindings/input/da9062-onkey.txt deleted file mode 100644 index e5eef59a93..0000000000 --- a/dts/Bindings/input/da9062-onkey.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Dialog DA9061/62/63 OnKey Module - -This module is part of the DA9061/DA9062/DA9063. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt -For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml - -This module provides the KEY_POWER event. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-onkey", "dlg,da9062-onkey" - "dlg,da9062-onkey" - "dlg,da9063-onkey" - -Optional properties: - -- dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press when triggered using a long press of the OnKey. - -Example: DA9063 - - pmic0: da9063@58 { - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9062 - - pmic0: da9062@58 { - onkey { - compatible = "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - onkey { - compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; - dlg,disable-key-power; - }; - }; diff --git a/dts/Bindings/input/dlg,da9062-onkey.yaml b/dts/Bindings/input/dlg,da9062-onkey.yaml new file mode 100644 index 0000000000..1480d95421 --- /dev/null +++ b/dts/Bindings/input/dlg,da9062-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9061/62/63 OnKey Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062/DA9063. For more details about entire + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + This module provides the KEY_POWER event. + +properties: + compatible: + oneOf: + - enum: + - dlg,da9062-onkey + - dlg,da9063-onkey + - items: + - const: dlg,da9061-onkey + - const: dlg,da9062-onkey + + dlg,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. If this entry exists + the OnKey driver will remove support for the KEY_POWER key press + when triggered using a long press of the OnKey. + +required: + - compatible + +additionalProperties: false diff --git a/dts/Bindings/input/samsung,s3c6410-keypad.yaml b/dts/Bindings/input/samsung,s3c6410-keypad.yaml new file mode 100644 index 0000000000..a53569aa0e --- /dev/null +++ b/dts/Bindings/input/samsung,s3c6410-keypad.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series Keypad Controller + +description: + Samsung SoC Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-keypad + - samsung,s5pv210-keypad + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: keypad + + interrupts: + maxItems: 1 + + wakeup-source: true + + linux,input-no-autorepeat: + type: boolean + description: + Do no enable autorepeat feature. + + linux,input-wakeup: + type: boolean + deprecated: true + + samsung,keypad-num-columns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of column lines connected to the keypad controller. + + samsung,keypad-num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of row lines connected to the keypad controller. + +patternProperties: + '^key-[0-9a-z]+$': + type: object + $ref: input.yaml# + additionalProperties: false + description: + Each key connected to the keypad controller is represented as a child + node to the keypad controller device node. + + properties: + keypad,column: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The column number to which the key is connected. + + keypad,row: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The row number to which the key is connected. + + linux,code: true + + required: + - keypad,column + - keypad,row + - linux,code + +required: + - compatible + - reg + - interrupts + - samsung,keypad-num-columns + - samsung,keypad-num-rows + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + keypad@100a0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100a0000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_KEYIF>; + clock-names = "keypad"; + + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + wakeup-source; + + key-1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key-2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + }; diff --git a/dts/Bindings/input/samsung-keypad.txt b/dts/Bindings/input/samsung-keypad.txt deleted file mode 100644 index 4c5c0a8258..0000000000 --- a/dts/Bindings/input/samsung-keypad.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Samsung's Keypad Controller device tree bindings - -Samsung's Keypad controller is used to interface a SoC with a matrix-type -keypad device. The keypad controller supports multiple row and column lines. -A key can be placed at each intersection of a unique row and a unique column. -The keypad controller can sense a key-press and key-release and report the -event using a interrupt to the cpu. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad - controller. - - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad - controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. - -Required Board Specific Properties: -- samsung,keypad-num-rows: Number of row lines connected to the keypad - controller. - -- samsung,keypad-num-columns: Number of column lines connected to the - keypad controller. - -- Keys represented as child nodes: Each key connected to the keypad - controller is represented as a child node to the keypad controller - device node and should include the following properties. - - keypad,row: the row number to which the key is connected. - - keypad,column: the column number to which the key is connected. - - linux,code: the key-code to be reported when the key is pressed - and released. - -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- wakeup-source: use any event on keypad as wakeup event. - (Legacy property supported: "linux,input-wakeup") - -Optional Properties specific to linux: -- linux,keypad-no-autorepeat: do no enable autorepeat feature. - - -Example: - keypad@100a0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <173>; - samsung,keypad-num-rows = <2>; - samsung,keypad-num-columns = <8>; - linux,input-no-autorepeat; - wakeup-source; - - pinctrl-names = "default"; - pinctrl-0 = <&keypad_rows &keypad_columns>; - - key_1 { - keypad,row = <0>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <0>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <4>; - }; - }; diff --git a/dts/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/dts/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml new file mode 100644 index 0000000000..678756ad0f --- /dev/null +++ b/dts/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6UL Touch Controller + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + const: fsl,imx6ul-tsc + + reg: + items: + - description: touch controller address + - description: ADC2 address + + interrupts: + items: + - description: touch controller address + - description: ADC2 address + + clocks: + maxItems: 2 + + clock-names: + items: + - const: tsc + - const: adc + + xnur-gpios: + maxItems: 1 + description: + The X- gpio this controller connect to. This xnur-gpio returns to + low once the finger leave the touch screen (The last touch event + the touch controller capture). + + measure-delay-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The value of measure delay time. Before X-axis or Y-axis measurement, + the screen need some time before even potential distribution ready. + default: 0xffff + minimum: 0 + maximum: 0xffffff + + pre-charge-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The touch screen need some time to precharge. + default: 0xfff + minimum: 0 + maximum: 0xffffffff + + touchscreen-average-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of data samples which are averaged for each read. + enum: [ 1, 4, 8, 16, 32 ] + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - xnur-gpios + +allOf: + - $ref: touchscreen.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/gpio/gpio.h> + touchscreen@2040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xfff>; + pre-charge-time = <0xffff>; + touchscreen-average-samples = <32>; + }; diff --git a/dts/Bindings/input/touchscreen/goodix,gt9916.yaml b/dts/Bindings/input/touchscreen/goodix,gt9916.yaml new file mode 100644 index 0000000000..d90f045ac0 --- /dev/null +++ b/dts/Bindings/input/touchscreen/goodix,gt9916.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix Berlin series touchscreen controller + +description: The Goodix Berlin series of touchscreen controllers + be connected to either I2C or SPI buses. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt9916 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vddio-supply: + description: power supply regulator on VDDIO pin + + spi-max-frequency: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt9916"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + spi-max-frequency = <1000000>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + +... diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml index 3d016b87c8..2a2d86cfd1 100644 --- a/dts/Bindings/input/touchscreen/goodix.yaml +++ b/dts/Bindings/input/touchscreen/goodix.yaml @@ -37,8 +37,9 @@ properties: maxItems: 1 irq-gpios: - description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin - as output to reset the device. + description: GPIO pin used for IRQ input. Additionally, this line is + sampled by the device on reset deassertion to select the I2C client + address, thus it can be driven by the host during the reset sequence. maxItems: 1 reset-gpios: diff --git a/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml b/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml index 0d6b033fd5..77ba280b3b 100644 --- a/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/dts/Bindings/input/touchscreen/imagis,ist3038c.yaml @@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller maintainers: - Markuss Broks <markuss.broks@gmail.com> -allOf: - - $ref: touchscreen.yaml# - properties: $nodename: pattern: "^touchscreen@[0-9a-f]+$" compatible: enum: + - imagis,ist3032c + - imagis,ist3038b - imagis,ist3038c reg: @@ -32,6 +31,10 @@ properties: vddio-supply: description: Power supply regulator for the I2C bus + linux,keycodes: + description: Keycodes for the touch keys + maxItems: 5 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true @@ -42,6 +45,18 @@ properties: additionalProperties: false +allOf: + - $ref: touchscreen.yaml# + - if: + not: + properties: + compatible: + contains: + const: imagis,ist3032c + then: + properties: + linux,keycodes: false + required: - compatible - reg diff --git a/dts/Bindings/input/touchscreen/imx6ul_tsc.txt b/dts/Bindings/input/touchscreen/imx6ul_tsc.txt deleted file mode 100644 index 1649150044..0000000000 --- a/dts/Bindings/input/touchscreen/imx6ul_tsc.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Freescale i.MX6UL Touch Controller - -Required properties: -- compatible: must be "fsl,imx6ul-tsc". -- reg: this touch controller address and the ADC2 address. -- interrupts: the interrupt of this touch controller and ADC2. -- clocks: the root clock of touch controller and ADC2. -- clock-names; must be "tsc" and "adc". -- xnur-gpio: the X- gpio this controller connect to. - This xnur-gpio returns to low once the finger leave the touch screen (The - last touch event the touch controller capture). - -Optional properties: -- measure-delay-time: the value of measure delay time. - Before X-axis or Y-axis measurement, the screen need some time before - even potential distribution ready. - This value depends on the touch screen. -- pre-charge-time: the touch screen need some time to precharge. - This value depends on the touch screen. -- touchscreen-average-samples: Number of data samples which are averaged for - each read. Valid values are 1, 4, 8, 16 and 32. - -Example: - tsc: tsc@2040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xfff>; - pre-charge-time = <0xffff>; - touchscreen-average-samples = <32>; - }; diff --git a/dts/Bindings/input/touchscreen/melfas,mms114.yaml b/dts/Bindings/input/touchscreen/melfas,mms114.yaml index 07f9dd6b1c..90ebd4f835 100644 --- a/dts/Bindings/input/touchscreen/melfas,mms114.yaml +++ b/dts/Bindings/input/touchscreen/melfas,mms114.yaml @@ -17,13 +17,17 @@ properties: pattern: "^touchscreen(@.*)?$" compatible: - items: + oneOf: - enum: - melfas,mms114 - melfas,mms134s - melfas,mms136 - melfas,mms152 - melfas,mms345l + - items: + - enum: + - melfas,mms252 + - const: melfas,mms114 reg: description: I2C address diff --git a/dts/Bindings/input/touchscreen/silead,gsl1680.yaml b/dts/Bindings/input/touchscreen/silead,gsl1680.yaml index 95b554be25..5381a96f49 100644 --- a/dts/Bindings/input/touchscreen/silead,gsl1680.yaml +++ b/dts/Bindings/input/touchscreen/silead,gsl1680.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: > File basename for board specific firmware diff --git a/dts/Bindings/interconnect/qcom,rpm.yaml b/dts/Bindings/interconnect/qcom,rpm.yaml index 08c1c6b9d7..5aaa92a7ce 100644 --- a/dts/Bindings/interconnect/qcom,rpm.yaml +++ b/dts/Bindings/interconnect/qcom,rpm.yaml @@ -23,6 +23,9 @@ properties: compatible: enum: + - qcom,msm8909-bimc + - qcom,msm8909-pcnoc + - qcom,msm8909-snoc - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc diff --git a/dts/Bindings/interconnect/qcom,rpmh.yaml b/dts/Bindings/interconnect/qcom,rpmh.yaml index 74ab080249..9318b845ec 100644 --- a/dts/Bindings/interconnect/qcom,rpmh.yaml +++ b/dts/Bindings/interconnect/qcom,rpmh.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> - - Odelu Kukatla <okukatla@codeaurora.org> + - Odelu Kukatla <quic_okukatla@quicinc.com> description: | RPMh interconnect providers support system bandwidth requirements through diff --git a/dts/Bindings/interconnect/qcom,sm7150-rpmh.yaml b/dts/Bindings/interconnect/qcom,sm7150-rpmh.yaml new file mode 100644 index 0000000000..b565d1a382 --- /dev/null +++ b/dts/Bindings/interconnect/qcom,sm7150-rpmh.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). + + See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + compatible: + enum: + - qcom,sm7150-aggre1-noc + - qcom,sm7150-aggre2-noc + - qcom,sm7150-compute-noc + - qcom,sm7150-config-noc + - qcom,sm7150-dc-noc + - qcom,sm7150-gem-noc + - qcom,sm7150-mc-virt + - qcom,sm7150-mmss-noc + - qcom,sm7150-system-noc + + reg: + maxItems: 1 + +# Child node's properties +patternProperties: + '^interconnect-[0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpmh-common.yaml# + + properties: + compatible: + enum: + - qcom,sm7150-camnoc-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mc_virt: interconnect@1380000 { + compatible = "qcom,sm7150-mc-virt"; + reg = <0x01380000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm7150-system-noc"; + reg = <0x01620000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + camnoc_virt: interconnect-0 { + compatible = "qcom,sm7150-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; diff --git a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index 3d06db98e9..a937447637 100644 --- a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -36,6 +36,7 @@ properties: - amlogic,meson-a1-gpio-intc - amlogic,meson-s4-gpio-intc - amlogic,c3-gpio-intc + - amlogic,t7-gpio-intc - const: amlogic,meson-gpio-intc reg: diff --git a/dts/Bindings/interrupt-controller/atmel,aic.txt b/dts/Bindings/interrupt-controller/atmel,aic.txt deleted file mode 100644 index 7079d44bf3..0000000000 --- a/dts/Bindings/interrupt-controller/atmel,aic.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Advanced Interrupt Controller (AIC) - -Required properties: -- compatible: Should be: - - "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2", - "sama5d3" or "sama5d4" - - "microchip,<chip>-aic" where <chip> can be "sam9x60" - -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: The number of cells to define the interrupts. It should be 3. - The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). - The second cell is used to specify flags: - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - Valid combinations are 1, 2, 3, 4, 8. - Default flag for internal sources should be set to 4 (active high). - The third cell is used to specify the irq priority from 0 (lowest) to 7 - (highest). -- reg: Should contain AIC registers location and length -- atmel,external-irqs: u32 array of external irqs. - -Examples: - /* - * AIC - */ - aic: interrupt-controller@fffff000 { - compatible = "atmel,at91rm9200-aic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xfffff000 0x200>; - }; - - /* - * An interrupt generating device that is wired to an AIC. - */ - dma: dma-controller@ffffec00 { - compatible = "atmel,at91sam9g45-dma"; - reg = <0xffffec00 0x200>; - interrupts = <21 4 5>; - }; diff --git a/dts/Bindings/interrupt-controller/atmel,aic.yaml b/dts/Bindings/interrupt-controller/atmel,aic.yaml new file mode 100644 index 0000000000..d4658fe386 --- /dev/null +++ b/dts/Bindings/interrupt-controller/atmel,aic.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advanced Interrupt Controller (AIC) + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + The Advanced Interrupt Controller (AIC) is an 8-level priority, individually + maskable, vectored interrupt controller providing handling of up to one + hundred and twenty-eight interrupt sources. + +properties: + compatible: + enum: + - atmel,at91rm9200-aic + - atmel,sama5d2-aic + - atmel,sama5d3-aic + - atmel,sama5d4-aic + - microchip,sam9x60-aic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the IRQ number (Peripheral IDentifier on datasheet). + The 2nd cell specifies flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations: 1, 2, 3, 4, 8. + Default for internal sources: 4 (active high). + The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest). + + interrupts: + maxItems: 1 + + atmel,external-irqs: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: u32 array of external irqs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + contains: + const: atmel,at91rm9200-aic + then: + properties: + atmel,external-irqs: + minItems: 1 + maxItems: 7 + else: + properties: + atmel,external-irqs: + minItems: 1 + maxItems: 1 + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - atmel,external-irqs + +unevaluatedProperties: false + +examples: + - | + interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + reg = <0xfffff000 0x200>; + interrupt-controller; + #interrupt-cells = <3>; + atmel,external-irqs = <31>; + }; +... diff --git a/dts/Bindings/interrupt-controller/fsl,intmux.yaml b/dts/Bindings/interrupt-controller/fsl,intmux.yaml index 985bfa4f6f..78baa0a571 100644 --- a/dts/Bindings/interrupt-controller/fsl,intmux.yaml +++ b/dts/Bindings/interrupt-controller/fsl,intmux.yaml @@ -37,6 +37,9 @@ properties: clock-names: const: ipg + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/dts/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml new file mode 100644 index 0000000000..e1a379c052 --- /dev/null +++ b/dts/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek sysirq + +description: + MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI + interrupt. + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt6577-sysirq + - items: + - enum: + - mediatek,mt2701-sysirq + - mediatek,mt2712-sysirq + - mediatek,mt6580-sysirq + - mediatek,mt6582-sysirq + - mediatek,mt6589-sysirq + - mediatek,mt6592-sysirq + - mediatek,mt6755-sysirq + - mediatek,mt6765-sysirq + - mediatek,mt6779-sysirq + - mediatek,mt6795-sysirq + - mediatek,mt6797-sysirq + - mediatek,mt7622-sysirq + - mediatek,mt7623-sysirq + - mediatek,mt7629-sysirq + - mediatek,mt8127-sysirq + - mediatek,mt8135-sysirq + - mediatek,mt8173-sysirq + - mediatek,mt8183-sysirq + - mediatek,mt8365-sysirq + - mediatek,mt8516-sysirq + - const: mediatek,mt6577-sysirq + + reg: + minItems: 1 + maxItems: 2 + + interrupt-controller: true + + "#interrupt-cells": + $ref: "arm,gic.yaml#/properties/#interrupt-cells" + +required: + - reg + - interrupt-controller + - "#interrupt-cells" + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + contains: + const: mediatek,mt6797-sysirq + then: + properties: + reg: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + interrupt-controller@10200620 { + compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq"; + reg = <0x10220620 0x20>, + <0x10220690 0x10>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + }; diff --git a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt b/dts/Bindings/interrupt-controller/mediatek,sysirq.txt deleted file mode 100644 index 3ffc60184e..0000000000 --- a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt +++ /dev/null @@ -1,44 +0,0 @@ -MediaTek sysirq - -MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI -interrupt. - -Required properties: -- compatible: should be - "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516 - "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183 - "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173 - "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 - "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 - "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 - "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 - "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629 - "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 - "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 - "mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779 - "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 - "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 - "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 - "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589 - "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 - "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 - "mediatek,mt6577-sysirq": for MT6577 - "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712 - "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 - "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365 -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. -- reg: Physical base address of the intpol registers and length of memory - mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others - need 1. - -Example: - sysirq: intpol-controller@10200620 { - compatible = "mediatek,mt6797-sysirq", - "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10220620 0 0x20>, - <0 0x10220690 0 0x10>; - }; diff --git a/dts/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/dts/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index d3b5aec0a3..daef4ee06f 100644 --- a/dts/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/dts/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -44,7 +44,7 @@ properties: maxItems: 1 interrupts: - minItems: 41 + minItems: 45 items: - description: NMI interrupt - description: IRQ0 interrupt @@ -88,9 +88,15 @@ properties: - description: GPIO interrupt, TINT30 - description: GPIO interrupt, TINT31 - description: Bus error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt + - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt + - description: ECCRAM1 1bit error interrupt + - description: ECCRAM1 2bit error interrupt + - description: ECCRAM1 error overflow interrupt interrupt-names: - minItems: 41 + minItems: 45 items: - const: nmi - const: irq0 @@ -134,6 +140,12 @@ properties: - const: tint30 - const: tint31 - const: bus-err + - const: ec7tie1-0 + - const: ec7tie2-0 + - const: ec7tiovf-0 + - const: ec7tie1-1 + - const: ec7tie2-1 + - const: ec7tiovf-1 clocks: maxItems: 2 @@ -156,6 +168,7 @@ required: - interrupt-controller - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -169,16 +182,19 @@ allOf: compatible: contains: enum: - - renesas,r9a07g043u-irqc - renesas,r9a08g045-irqc then: properties: interrupts: - minItems: 42 + maxItems: 45 interrupt-names: - minItems: 42 - required: - - interrupt-names + maxItems: 45 + else: + properties: + interrupts: + minItems: 48 + interrupt-names: + minItems: 48 unevaluatedProperties: false @@ -233,7 +249,14 @@ examples: <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7", @@ -244,7 +267,10 @@ examples: "tint16", "tint17", "tint18", "tint19", "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", - "tint28", "tint29", "tint30", "tint31"; + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, <&cpg CPG_MOD R9A07G044_IA55_PCLK>; clock-names = "clk", "pclk"; diff --git a/dts/Bindings/interrupt-controller/starfive,jh8100-intc.yaml b/dts/Bindings/interrupt-controller/starfive,jh8100-intc.yaml new file mode 100644 index 0000000000..ada5788602 --- /dev/null +++ b/dts/Bindings/interrupt-controller/starfive,jh8100-intc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive External Interrupt Controller + +description: + StarFive SoC JH8100 contain a external interrupt controller. It can be used + to handle high-level input interrupt signals. It also send the output + interrupt signal to RISC-V PLIC. + +maintainers: + - Changhuang Liang <changhuang.liang@starfivetech.com> + +properties: + compatible: + const: starfive,jh8100-intc + + reg: + maxItems: 1 + + clocks: + description: APB clock for the interrupt controller + maxItems: 1 + + resets: + description: APB reset for the interrupt controller + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + interrupt-controller@12260000 { + compatible = "starfive,jh8100-intc"; + reg = <0x12260000 0x10000>; + clocks = <&syscrg_ne 76>; + resets = <&syscrg_ne 13>; + interrupts = <45>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/dts/Bindings/iommu/arm,smmu.yaml b/dts/Bindings/iommu/arm,smmu.yaml index a4042ae247..5c130cf06a 100644 --- a/dts/Bindings/iommu/arm,smmu.yaml +++ b/dts/Bindings/iommu/arm,smmu.yaml @@ -83,6 +83,7 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,qcm2290-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8280xp-smmu-500 @@ -93,6 +94,7 @@ properties: - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 @@ -462,6 +464,7 @@ allOf: compatible: items: - enum: + - qcom,qcm2290-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - const: qcom,adreno-smmu @@ -484,7 +487,12 @@ allOf: - if: properties: compatible: - const: qcom,sm8450-smmu-500 + items: + - const: qcom,sm8450-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + then: properties: clock-names: @@ -508,7 +516,13 @@ allOf: - if: properties: compatible: - const: qcom,sm8550-smmu-500 + items: + - enum: + - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 then: properties: clock-names: @@ -534,7 +548,6 @@ allOf: - cavium,smmu-v2 - marvell,ap806-smmu-500 - nvidia,smmu-500 - - qcom,qcm2290-smmu-500 - qcom,qdu1000-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc8180x-smmu-500 @@ -544,7 +557,6 @@ allOf: - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - - qcom,sm8650-smmu-500 - qcom,x1e80100-smmu-500 then: properties: diff --git a/dts/Bindings/leds/backlight/kinetic,ktd2801.yaml b/dts/Bindings/leds/backlight/kinetic,ktd2801.yaml new file mode 100644 index 0000000000..b005065e0f --- /dev/null +++ b/dts/Bindings/leds/backlight/kinetic,ktd2801.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic Technologies KTD2801 one-wire backlight + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +description: | + The Kinetic Technologies KTD2801 is a LED backlight driver controlled + by a single GPIO line. The driver can be controlled with a PWM signal + or by pulsing the GPIO line to set the backlight level. This is called + "ExpressWire". + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: kinetic,ktd2801 + + ctrl-gpios: + maxItems: 1 + + default-brightness: true + max-brightness: true + +required: + - compatible + - ctrl-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + default-brightness = <100>; + }; diff --git a/dts/Bindings/leds/backlight/qcom-wled.yaml b/dts/Bindings/leds/backlight/qcom-wled.yaml index 5f1849bdab..a849078101 100644 --- a/dts/Bindings/leds/backlight/qcom-wled.yaml +++ b/dts/Bindings/leds/backlight/qcom-wled.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. WLED driver maintainers: - - Bjorn Andersson <bjorn.andersson@linaro.org> - - Kiran Gunda <kgunda@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> + - Kiran Gunda <quic_kgunda@quicinc.com> description: | WLED (White Light Emitting Diode) driver is used for controlling display diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml index 55a8d1385e..8a3c2398b1 100644 --- a/dts/Bindings/leds/common.yaml +++ b/dts/Bindings/leds/common.yaml @@ -200,6 +200,18 @@ properties: #trigger-source-cells property in the source node. $ref: /schemas/types.yaml#/definitions/phandle-array + active-low: + type: boolean + description: + Makes LED active low. To turn the LED ON, line needs to be + set to low voltage instead of high. + + inactive-high-impedance: + type: boolean + description: + Set LED to high-impedance mode to turn the LED OFF. LED might also + describe this mode as tristate. + # Required properties for flash LED child nodes: flash-max-microamp: description: diff --git a/dts/Bindings/leds/leds-bcm63138.yaml b/dts/Bindings/leds/leds-bcm63138.yaml index 52252fb6bb..bb20394fca 100644 --- a/dts/Bindings/leds/leds-bcm63138.yaml +++ b/dts/Bindings/leds/leds-bcm63138.yaml @@ -52,10 +52,6 @@ patternProperties: maxItems: 1 description: LED pin number - active-low: - type: boolean - description: Makes LED active low - required: - reg diff --git a/dts/Bindings/leds/leds-bcm6328.yaml b/dts/Bindings/leds/leds-bcm6328.yaml index 51cc0d82c1..f3a3ef9929 100644 --- a/dts/Bindings/leds/leds-bcm6328.yaml +++ b/dts/Bindings/leds/leds-bcm6328.yaml @@ -78,10 +78,6 @@ patternProperties: - maximum: 23 description: LED pin number (only LEDs 0 to 23 are valid). - active-low: - type: boolean - description: Makes LED active low. - brcm,hardware-controlled: type: boolean description: Makes this LED hardware controlled. diff --git a/dts/Bindings/leds/leds-bcm6358.txt b/dts/Bindings/leds/leds-bcm6358.txt index 6e51c6b91e..211ffc3c4a 100644 --- a/dts/Bindings/leds/leds-bcm6358.txt +++ b/dts/Bindings/leds/leds-bcm6358.txt @@ -25,8 +25,6 @@ LED sub-node required properties: LED sub-node optional properties: - label : see Documentation/devicetree/bindings/leds/common.txt - - active-low : Boolean, makes LED active low. - Default : false - default-state : see Documentation/devicetree/bindings/leds/common.txt - linux,default-trigger : see diff --git a/dts/Bindings/leds/leds-pwm-multicolor.yaml b/dts/Bindings/leds/leds-pwm-multicolor.yaml index bd6ec04a87..a31a202afe 100644 --- a/dts/Bindings/leds/leds-pwm-multicolor.yaml +++ b/dts/Bindings/leds/leds-pwm-multicolor.yaml @@ -41,9 +41,7 @@ properties: pwm-names: true - active-low: - description: For PWMs where the LED is wired to supply rather than ground. - type: boolean + active-low: true color: true diff --git a/dts/Bindings/leds/leds-pwm.yaml b/dts/Bindings/leds/leds-pwm.yaml index 7de6da58be..113b7c2183 100644 --- a/dts/Bindings/leds/leds-pwm.yaml +++ b/dts/Bindings/leds/leds-pwm.yaml @@ -34,11 +34,6 @@ patternProperties: Maximum brightness possible for the LED $ref: /schemas/types.yaml#/definitions/uint32 - active-low: - description: - For PWMs where the LED is wired to supply rather than ground. - type: boolean - required: - pwms - max-brightness diff --git a/dts/Bindings/leds/leds-qcom-lpg.yaml b/dts/Bindings/leds/leds-qcom-lpg.yaml index ea84ad426d..54a428d3d4 100644 --- a/dts/Bindings/leds/leds-qcom-lpg.yaml +++ b/dts/Bindings/leds/leds-qcom-lpg.yaml @@ -11,7 +11,7 @@ maintainers: description: > The Qualcomm Light Pulse Generator consists of three different hardware blocks; - a ramp generator with lookup table, the light pulse generator and a three + a ramp generator with lookup table (LUT), the light pulse generator and a three channel current sink. These blocks are found in a wide range of Qualcomm PMICs. properties: @@ -63,6 +63,29 @@ properties: - description: dtest line to attach - description: flags for the attachment + nvmem: + description: > + This property is required for PMICs that supports PPG, which is when a + PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead + of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data + and pattern LUT is separated into 2 SDAM modules. In that case, phandles + to both SDAM modules need to be specified. + minItems: 1 + maxItems: 2 + + nvmem-names: + minItems: 1 + items: + - const: lpg_chan_sdam + - const: lut_sdam + + qcom,pbs: + $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the Qualcomm Programmable Boot Sequencer node (PBS). + PBS node is used to trigger LPG pattern sequences for PMICs that support + single SDAM PPG. + multi-led: type: object $ref: leds-class-multicolor.yaml# @@ -106,6 +129,52 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-lpg + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + - qcom,pmk8550-pwm + then: + properties: + nvmem: false + nvmem-names: false + + - if: + properties: + compatible: + contains: + const: qcom,pmi632-lpg + then: + properties: + nvmem: + maxItems: 1 + nvmem-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8350c-pwm + then: + properties: + nvmem: + minItems: 2 + nvmem-names: + minItems: 2 + examples: - | #include <dt-bindings/leds/common.h> @@ -191,4 +260,35 @@ examples: compatible = "qcom,pm8916-pwm"; #pwm-cells = <2>; }; + - | + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "qcom,pmi632-lpg"; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + nvmem-names = "lpg_chan_sdam"; + nvmem = <&pmi632_sdam_7>; + qcom,pbs = <&pmi632_pbs_client3>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + label = "red"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + label = "green"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + label = "blue"; + }; + }; + ... diff --git a/dts/Bindings/leds/onnn,ncp5623.yaml b/dts/Bindings/leds/onnn,ncp5623.yaml new file mode 100644 index 0000000000..9c9f3a682b --- /dev/null +++ b/dts/Bindings/leds/onnn,ncp5623.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor NCP5623 multi-LED Driver + +maintainers: + - Abdel Alkuor <alkuor@gmail.com> + +description: + NCP5623 Triple Output I2C Controlled LED Driver. + https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf + +properties: + compatible: + enum: + - onnn,ncp5623 + + reg: + const: 0x38 + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-2]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 2 + + required: + - reg + - color + + required: + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - multi-led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@38 { + compatible = "onnn,ncp5623"; + reg = <0x38>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + }; diff --git a/dts/Bindings/mailbox/fsl,mu.yaml b/dts/Bindings/mailbox/fsl,mu.yaml index 12e7a7d536..00631afcd5 100644 --- a/dts/Bindings/mailbox/fsl,mu.yaml +++ b/dts/Bindings/mailbox/fsl,mu.yaml @@ -29,8 +29,11 @@ properties: - const: fsl,imx8ulp-mu - const: fsl,imx8-mu-scu - const: fsl,imx8-mu-seco - - const: fsl,imx93-mu-s4 - const: fsl,imx8ulp-mu-s4 + - const: fsl,imx93-mu-s4 + - const: fsl,imx95-mu + - const: fsl,imx95-mu-ele + - const: fsl,imx95-mu-v2x - items: - const: fsl,imx93-mu - const: fsl,imx8ulp-mu @@ -95,6 +98,19 @@ properties: power-domains: maxItems: 1 + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^sram@[a-f0-9]+": + $ref: /schemas/sram/sram.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -122,6 +138,15 @@ allOf: required: - interrupt-names + - if: + not: + properties: + compatible: + const: fsl,imx95-mu + then: + patternProperties: + "^sram@[a-f0-9]+": false + additionalProperties: false examples: @@ -134,3 +159,34 @@ examples: interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@445b0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445b0000 0x10000>; + ranges; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + #mbox-cells = <2>; + + sram@445b1000 { + compatible = "mmio-sram"; + reg = <0x445b1000 0x400>; + ranges = <0x0 0x445b1000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + scmi-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + scmi-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + }; + }; diff --git a/dts/Bindings/media/i2c/techwell,tw9900.yaml b/dts/Bindings/media/i2c/techwell,tw9900.yaml index e37317f810..c9673391af 100644 --- a/dts/Bindings/media/i2c/techwell,tw9900.yaml +++ b/dts/Bindings/media/i2c/techwell,tw9900.yaml @@ -36,7 +36,7 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/$defs/port-base + $ref: /schemas/graph.yaml#/properties/port description: Analog input port properties: diff --git a/dts/Bindings/media/mediatek,vcodec-encoder.yaml b/dts/Bindings/media/mediatek,vcodec-encoder.yaml index a2051b31fa..b45743d0a9 100644 --- a/dts/Bindings/media/mediatek,vcodec-encoder.yaml +++ b/dts/Bindings/media/mediatek,vcodec-encoder.yaml @@ -16,14 +16,18 @@ description: |+ properties: compatible: - enum: - - mediatek,mt8173-vcodec-enc-vp8 - - mediatek,mt8173-vcodec-enc - - mediatek,mt8183-vcodec-enc - - mediatek,mt8188-vcodec-enc - - mediatek,mt8192-vcodec-enc - - mediatek,mt8195-vcodec-enc - + oneOf: + - items: + - enum: + - mediatek,mt8173-vcodec-enc-vp8 + - mediatek,mt8173-vcodec-enc + - mediatek,mt8183-vcodec-enc + - mediatek,mt8188-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc + - items: + - const: mediatek,mt8186-vcodec-enc + - const: mediatek,mt8183-vcodec-enc reg: maxItems: 1 @@ -109,10 +113,7 @@ allOf: properties: compatible: enum: - - mediatek,mt8173-vcodec-enc - - mediatek,mt8188-vcodec-enc - - mediatek,mt8192-vcodec-enc - - mediatek,mt8195-vcodec-enc + - mediatek,mt8173-vcodec-enc-vp8 then: properties: @@ -122,8 +123,8 @@ allOf: maxItems: 1 clock-names: items: - - const: venc_sel - else: # for vp8 hw encoder + - const: venc_lt_sel + else: properties: clock: items: @@ -131,7 +132,7 @@ allOf: maxItems: 1 clock-names: items: - - const: venc_lt_sel + - const: venc_sel additionalProperties: false diff --git a/dts/Bindings/media/mediatek-jpeg-encoder.yaml b/dts/Bindings/media/mediatek-jpeg-encoder.yaml index 37800e1908..83c020a673 100644 --- a/dts/Bindings/media/mediatek-jpeg-encoder.yaml +++ b/dts/Bindings/media/mediatek-jpeg-encoder.yaml @@ -38,7 +38,8 @@ properties: maxItems: 1 iommus: - maxItems: 2 + minItems: 2 + maxItems: 4 description: | Points to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. diff --git a/dts/Bindings/media/rockchip-isp1.yaml b/dts/Bindings/media/rockchip-isp1.yaml index afcaa427d4..6be00aca41 100644 --- a/dts/Bindings/media/rockchip-isp1.yaml +++ b/dts/Bindings/media/rockchip-isp1.yaml @@ -16,6 +16,7 @@ description: | properties: compatible: enum: + - fsl,imx8mp-isp - rockchip,px30-cif-isp - rockchip,rk3399-cif-isp @@ -36,9 +37,9 @@ properties: minItems: 3 items: # isp0 and isp1 - - description: ISP clock - - description: ISP AXI clock - - description: ISP AHB clock + - description: ISP clock (for imx8mp, clk) + - description: ISP AXI clock (for imx8mp, m_hclk) + - description: ISP AHB clock (for imx8mp, hclk) # only for isp1 - description: ISP Pixel clock @@ -52,6 +53,13 @@ properties: # only for isp1 - const: pclk + fsl,blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to the media block control for the ISP, followed by a cell + containing the index of the gasket. + iommus: maxItems: 1 @@ -113,9 +121,6 @@ required: - interrupts - clocks - clock-names - - iommus - - phys - - phy-names - power-domains - ports @@ -143,6 +148,26 @@ allOf: required: - interrupt-names + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-isp + then: + properties: + iommus: false + phys: false + phy-names: false + required: + - fsl,blk-ctrl + else: + properties: + fsl,blk-ctrl: false + required: + - iommus + - phys + - phy-names + additionalProperties: false examples: diff --git a/dts/Bindings/media/st,stm32mp25-video-codec.yaml b/dts/Bindings/media/st,stm32mp25-video-codec.yaml new file mode 100644 index 0000000000..b8611bc875 --- /dev/null +++ b/dts/Bindings/media/st,stm32mp25-video-codec.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder + +maintainers: + - Hugues Fruchet <hugues.fruchet@foss.st.com> + +description: + The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware + decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1) + and a VENC video hardware encoder peripheral based on Verisilicon + VC8000NanoE IP (former Hantro H1). + +properties: + compatible: + enum: + - st,stm32mp25-vdec + - st,stm32mp25-venc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + video-codec@580d0000 { + compatible = "st,stm32mp25-vdec"; + reg = <0x580d0000 0x3c8>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_icn_p_vdec>; + }; diff --git a/dts/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml b/dts/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml new file mode 100644 index 0000000000..82fc5f4a1e --- /dev/null +++ b/dts/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX WEIM Bus Peripheral Nodes + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + This binding is meant for the child nodes of the WEIM node. The node + represents any device connected to the WEIM bus. It may be a Flash chip, + RAM chip or Ethernet controller, etc. These properties are meant for + configuring the WEIM settings/timings and will accompany the bindings + supported by the respective device. + +properties: + reg: true + + fsl,weim-cs-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Timing values for the child node. + minItems: 2 + maxItems: 6 + +# the WEIM child will have its own native properties +additionalProperties: true diff --git a/dts/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml b/dts/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml new file mode 100644 index 0000000000..3f40ca5b13 --- /dev/null +++ b/dts/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX Wireless External Interface Module (WEIM) + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + The term "wireless" does not imply that the WEIM is literally an interface + without wires. It simply means that this module was originally designed for + wireless and mobile applications that use low-power technology. The actual + devices are instantiated from the child nodes of a WEIM node. + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - fsl,imx1-weim + - fsl,imx27-weim + - fsl,imx50-weim + - fsl,imx51-weim + - fsl,imx6q-weim + - items: + - enum: + - fsl,imx31-weim + - fsl,imx35-weim + - const: fsl,imx27-weim + - items: + - enum: + - fsl,imx6sx-weim + - fsl,imx6ul-weim + - const: fsl,imx6q-weim + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + ranges: true + + fsl,weim-cs-gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the system General Purpose Register controller that contains + WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0] + should be set up as one of the following 4 possible values depending on + the CS space configuration. + + IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3 + --------------------------------------------- + 05 128M 0M 0M 0M + 033 64M 64M 0M 0M + 0113 64M 32M 32M 0M + 01111 32M 32M 32M 32M + + In case that the property is absent, the reset value or what bootloader + sets up in IOMUXC_GPR1[11:0] will be used. + + fsl,burst-clk-enable: + type: boolean + description: + The presence of this property indicates that the weim bus should operate + in Burst Clock Mode. + + fsl,continuous-burst-clk: + type: boolean + description: + Make Burst Clock to output continuous clock. Without this option Burst + Clock will output clock only when necessary. + +patternProperties: + "^.*@[0-7],[0-9a-f]+$": + type: object + description: Devices attached to chip selects are represented as subnodes. + $ref: fsl,imx-weim-peripherals.yaml + additionalProperties: true + required: + - fsl,weim-cs-timing + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx50-weim + - fsl,imx6q-weim + then: + properties: + fsl,weim-cs-gpr: false + fsl,burst-clk-enable: false + - if: + not: + required: + - fsl,burst-clk-enable + then: + properties: + fsl,continuous-burst-clk: false + - if: + properties: + compatible: + contains: + const: fsl,imx1-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + items: + - description: CSxU + - description: CSxL + - if: + properties: + compatible: + contains: + enum: + - fsl,imx27-weim + - fsl,imx31-weim + - fsl,imx35-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + items: + - description: CSCRxU + - description: CSCRxL + - description: CSCRxA + - if: + properties: + compatible: + contains: + enum: + - fsl,imx50-weim + - fsl,imx51-weim + - fsl,imx6q-weim + - fsl,imx6sx-weim + - fsl,imx6ul-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + items: + - description: CSxGCR1 + - description: CSxGCR2 + - description: CSxRCR1 + - description: CSxRCR2 + - description: CSxWCR1 + - description: CSxWCR2 + +additionalProperties: false + +examples: + - | + memory-controller@21b8000 { + compatible = "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + clocks = <&clks 196>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + fsl,weim-cs-gpr = <&gpr>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; + }; diff --git a/dts/Bindings/memory-controllers/mc-peripheral-props.yaml b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml index 8d9dae15ad..00deeb09f8 100644 --- a/dts/Bindings/memory-controllers/mc-peripheral-props.yaml +++ b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml @@ -37,5 +37,6 @@ allOf: - $ref: ingenic,nemc-peripherals.yaml# - $ref: intel,ixp4xx-expansion-peripheral-props.yaml# - $ref: ti,gpmc-child.yaml# + - $ref: fsl/fsl,imx-weim-peripherals.yaml additionalProperties: true diff --git a/dts/Bindings/memory-controllers/nvidia,tegra20-emc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra20-emc.yaml index f54e553e6c..71896cb106 100644 --- a/dts/Bindings/memory-controllers/nvidia,tegra20-emc.yaml +++ b/dts/Bindings/memory-controllers/nvidia,tegra20-emc.yaml @@ -145,7 +145,7 @@ patternProperties: "^emc-table@[0-9]+$": $ref: "#/$defs/emc-table" - "^emc-tables@[a-z0-9-]+$": + "^emc-tables@[a-f0-9-]+$": type: object properties: reg: diff --git a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml index 25f3bb9890..d7745dd53b 100644 --- a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml +++ b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - renesas,r8a779g0-rpc-if # R-Car V4H + - renesas,r8a779h0-rpc-if # R-Car V4M - const: renesas,rcar-gen4-rpc-if # a generic R-Car gen4 device - items: diff --git a/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 14f1833d37..84ac6f50a6 100644 --- a/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/dts/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -23,7 +23,9 @@ maintainers: properties: compatible: - const: st,stm32mp1-fmc2-ebi + enum: + - st,stm32mp1-fmc2-ebi + - st,stm32mp25-fmc2-ebi reg: maxItems: 1 @@ -34,6 +36,9 @@ properties: resets: maxItems: 1 + power-domains: + maxItems: 1 + "#address-cells": const: 2 diff --git a/dts/Bindings/mfd/atmel,hlcdc.yaml b/dts/Bindings/mfd/atmel,hlcdc.yaml new file mode 100644 index 0000000000..4aa36903e7 --- /dev/null +++ b/dts/Bindings/mfd/atmel,hlcdc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCD Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two + subdevices, a PWM chip and a Display Controller. + +properties: + compatible: + enum: + - atmel,at91sam9n12-hlcdc + - atmel,at91sam9x5-hlcdc + - atmel,sama5d2-hlcdc + - atmel,sama5d3-hlcdc + - atmel,sama5d4-hlcdc + - microchip,sam9x60-hlcdc + - microchip,sam9x75-xlcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: periph_clk + - const: sys_clk + - const: slow_clk + - const: lvds_pll_clk + minItems: 3 + + display-controller: + $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml + + pwm: + $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd_controller: lcd-controller@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml b/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 0000000000..0dc6a40b63 --- /dev/null +++ b/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Microchip Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + oneOf: + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sam9x7-flexcom + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sama7g5-flexcom + - const: atmel,sama5d2-flexcom + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/dts/Bindings/mfd/atmel-flexcom.txt b/dts/Bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index af692e8833..0000000000 --- a/dts/Bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" - or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; diff --git a/dts/Bindings/mfd/atmel-hlcdc.txt b/dts/Bindings/mfd/atmel-hlcdc.txt deleted file mode 100644 index 7de696eefa..0000000000 --- a/dts/Bindings/mfd/atmel-hlcdc.txt +++ /dev/null @@ -1,56 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver - -Required properties: - - compatible: value should be one of the following: - "atmel,at91sam9n12-hlcdc" - "atmel,at91sam9x5-hlcdc" - "atmel,sama5d2-hlcdc" - "atmel,sama5d3-hlcdc" - "atmel,sama5d4-hlcdc" - "microchip,sam9x60-hlcdc" - "microchip,sam9x75-xlcdc" - - reg: base address and size of the HLCDC device registers. - - clock-names: the name of the 3 clocks requested by the HLCDC device. - Should contain "periph_clk", "sys_clk" and "slow_clk". - - clocks: should contain the 3 clocks requested by the HLCDC device. - - interrupts: should contain the description of the HLCDC interrupt line - -The HLCDC IP exposes two subdevices: - - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../display/atmel/hlcdc-dc.txt - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/dts/Bindings/mfd/da9062.txt b/dts/Bindings/mfd/da9062.txt deleted file mode 100644 index e4eedd3bd2..0000000000 --- a/dts/Bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/da9062-onkey.txt - -- watchdog: See ../watchdog/da9062-wdt.txt - -- thermal : See ../thermal/da9062-thermal.txt - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/dts/Bindings/mfd/dlg,da9063.yaml b/dts/Bindings/mfd/dlg,da9063.yaml index c5a7e10d7d..51612dc227 100644 --- a/dts/Bindings/mfd/dlg,da9063.yaml +++ b/dts/Bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,20 +42,28 @@ properties: "#interrupt-cells": const: 2 - dlg,use-sw-pm: - type: boolean - description: - Disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). + gpio-controller: true - watchdog: + "#gpio-cells": + const: 2 + + gpio: type: object - $ref: /schemas/watchdog/watchdog.yaml# - unevaluatedProperties: false + additionalProperties: false properties: compatible: - const: dlg,da9063-watchdog + const: dlg,da9062-gpio + + onkey: + $ref: /schemas/input/dlg,da9062-onkey.yaml + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false rtc: type: object @@ -56,37 +71,86 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc - onkey: - type: object - $ref: /schemas/input/input.yaml# - unevaluatedProperties: false - properties: - compatible: - const: dlg,da9063-onkey + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml - dlg,disable-key-power: - type: boolean - description: | - Disable power-down using a long key-press. - If this entry does not exist then by default the key-press triggered - power down is enabled and the OnKey will support both KEY_POWER and - KEY_SLEEP. + watchdog: + $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml - regulators: +patternProperties: + "^(.+-hog(-[0-9]+)?)$": type: object - additionalProperties: false - patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": - $ref: /schemas/regulator/regulator.yaml - unevaluatedProperties: false + + required: + - gpio-hog required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -99,10 +163,10 @@ examples: pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -143,4 +207,121 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml index e1ca4f297c..aac8819bd0 100644 --- a/dts/Bindings/mfd/google,cros-ec.yaml +++ b/dts/Bindings/mfd/google,cros-ec.yaml @@ -93,6 +93,11 @@ properties: '#size-cells': const: 0 + '#gpio-cells': + const: 2 + + gpio-controller: true + typec: $ref: /schemas/chrome/google,cros-ec-typec.yaml# @@ -275,6 +280,8 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; proximity { compatible = "google,cros-ec-mkbp-proximity"; diff --git a/dts/Bindings/mfd/iqs62x.yaml b/dts/Bindings/mfd/iqs62x.yaml index 044cd7542c..f438c23749 100644 --- a/dts/Bindings/mfd/iqs62x.yaml +++ b/dts/Bindings/mfd/iqs62x.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Specifies the name of the calibration and configuration file selected by the driver. If this property is omitted, the name is chosen based on the diff --git a/dts/Bindings/mfd/qcom,tcsr.yaml b/dts/Bindings/mfd/qcom,tcsr.yaml index 798705ab6a..b97d770153 100644 --- a/dts/Bindings/mfd/qcom,tcsr.yaml +++ b/dts/Bindings/mfd/qcom,tcsr.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,msm8976-tcsr - qcom,msm8998-tcsr + - qcom,qcm2290-tcsr - qcom,qcs404-tcsr - qcom,sc7180-tcsr - qcom,sc7280-tcsr @@ -28,6 +29,7 @@ properties: - qcom,sdx55-tcsr - qcom,sdx65-tcsr - qcom,sm4450-tcsr + - qcom,sm6115-tcsr - qcom,sm8150-tcsr - qcom,sm8250-tcsr - qcom,sm8350-tcsr diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml index 084b5c2a2a..9d55bee155 100644 --- a/dts/Bindings/mfd/syscon.yaml +++ b/dts/Bindings/mfd/syscon.yaml @@ -72,7 +72,10 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am62-usb-phy-ctrl - ti,am654-dss-oldi-io-ctrl + - ti,am654-serdes-ctrl + - ti,j784s4-pcie-ctrl - const: syscon diff --git a/dts/Bindings/mfd/ti,twl.yaml b/dts/Bindings/mfd/ti,twl.yaml index c04d57ba22..52ed228fb1 100644 --- a/dts/Bindings/mfd/ti,twl.yaml +++ b/dts/Bindings/mfd/ti,twl.yaml @@ -34,6 +34,8 @@ properties: interrupt-controller: true + system-power-controller: true + "#interrupt-cells": const: 1 diff --git a/dts/Bindings/mips/cpus.yaml b/dts/Bindings/mips/cpus.yaml index cf382dea39..a85137add6 100644 --- a/dts/Bindings/mips/cpus.yaml +++ b/dts/Bindings/mips/cpus.yaml @@ -23,22 +23,23 @@ properties: - brcm,bmips4380 - brcm,bmips5000 - brcm,bmips5200 - - ingenic,xburst-mxu1.0 + - img,i6500 - ingenic,xburst-fpu1.0-mxu1.1 - ingenic,xburst-fpu2.0-mxu2.0 + - ingenic,xburst-mxu1.0 - ingenic,xburst2-fpu2.1-mxu2.1-smt - loongson,gs264 - mips,m14Kc - - mips,mips4Kc - - mips,mips4KEc - - mips,mips24Kc + - mips,mips1004Kc - mips,mips24KEc + - mips,mips24Kc + - mips,mips4KEc + - mips,mips4Kc - mips,mips74Kc - - mips,mips1004Kc - mti,interaptiv - - mti,mips24KEc - mti,mips14KEc - mti,mips14Kc + - mti,mips24KEc reg: maxItems: 1 diff --git a/dts/Bindings/mips/mobileye.yaml b/dts/Bindings/mips/mobileye.yaml new file mode 100644 index 0000000000..831975f6b4 --- /dev/null +++ b/dts/Bindings/mips/mobileye.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright 2023 Mobileye Vision Technologies Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/mobileye.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye SoC series + +maintainers: + - Vladimir Kondratiev <vladimir.kondratiev@intel.com> + - Gregory CLEMENT <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + +description: + Boards with a Mobileye SoC shall have the following properties. + +properties: + $nodename: + const: '/' + + compatible: + oneOf: + - description: Boards with Mobileye EyeQ5 SoC + items: + - enum: + - mobileye,eyeq5-epm5 + - const: mobileye,eyeq5 + +additionalProperties: true + +... diff --git a/dts/Bindings/misc/qcom,fastrpc.yaml b/dts/Bindings/misc/qcom,fastrpc.yaml index 2dc3e245fa..c27a8f33d8 100644 --- a/dts/Bindings/misc/qcom,fastrpc.yaml +++ b/dts/Bindings/misc/qcom,fastrpc.yaml @@ -77,6 +77,8 @@ patternProperties: reg: maxItems: 1 + dma-coherent: true + iommus: minItems: 1 maxItems: 3 diff --git a/dts/Bindings/misc/xlnx,sd-fec.txt b/dts/Bindings/misc/xlnx,sd-fec.txt deleted file mode 100644 index e3289634fa..0000000000 --- a/dts/Bindings/misc/xlnx,sd-fec.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Xilinx SDFEC(16nm) IP * - -The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block -which provides high-throughput LDPC and Turbo Code implementations. -The LDPC decode & encode functionality is capable of covering a range of -customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality -principally covers codes used by LTE. The FEC Engine offers significant -power and area savings versus implementations done in the FPGA fabric. - - -Required properties: -- compatible: Must be "xlnx,sd-fec-1.1" -- clock-names : List of input clock names from the following: - - "core_clk", Main processing clock for processing core (required) - - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) - - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) - - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) - - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) - - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) - - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) - - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) -- clocks : Clock phandles (see clock_bindings.txt for details). -- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers - location and length. -- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes - being used. -- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DIN_WORDS to be block based, while a value of 2 configures the - DIN_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DOUT_WORDS to be block based, while a value of 2 configures the - DOUT_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -Optional properties: -- interrupts: should contain SDFEC interrupt number - -Example ---------------------------------------- - sd_fec_0: sd-fec@a0040000 { - compatible = "xlnx,sd-fec-1.1"; - clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; - clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; - reg = <0x0 0xa0040000 0x0 0x40000>; - interrupt-parent = <&axi_intc>; - interrupts = <1 0>; - xlnx,sdfec-code = "ldpc"; - xlnx,sdfec-din-words = <0>; - xlnx,sdfec-din-width = <2>; - xlnx,sdfec-dout-words = <0>; - xlnx,sdfec-dout-width = <1>; - }; diff --git a/dts/Bindings/misc/xlnx,sd-fec.yaml b/dts/Bindings/misc/xlnx,sd-fec.yaml new file mode 100644 index 0000000000..9bd2103374 --- /dev/null +++ b/dts/Bindings/misc/xlnx,sd-fec.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SDFEC(16nm) IP + +maintainers: + - Cvetic, Dragan <dragan.cvetic@amd.com> + - Erim, Salih <salih.erim@amd.com> + +description: + The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block + which provides high-throughput LDPC and Turbo Code implementations. + The LDPC decode & encode functionality is capable of covering a range of + customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality + principally covers codes used by LTE. The FEC Engine offers significant + power and area savings versus implementations done in the FPGA fabric. + +properties: + compatible: + const: xlnx,sd-fec-1.1 + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 8 + additionalItems: true + items: + - description: Main processing clock for processing core + - description: AXI4-Lite memory-mapped slave interface clock + - description: Control input AXI4-Stream Slave interface clock + - description: DIN AXI4-Stream Slave interface clock + - description: Status output AXI4-Stream Master interface clock + - description: DOUT AXI4-Stream Master interface clock + - description: DIN_WORDS AXI4-Stream Slave interface clock + - description: DOUT_WORDS AXI4-Stream Master interface clock + + clock-names: + allOf: + - minItems: 2 + maxItems: 8 + additionalItems: true + items: + - const: core_clk + - const: s_axi_aclk + - items: + enum: + - core_clk + - s_axi_aclk + - s_axis_ctrl_aclk + - s_axis_din_aclk + - m_axis_status_aclk + - m_axis_dout_aclk + - s_axis_din_words_aclk + - m_axis_dout_words_aclk + + interrupts: + maxItems: 1 + + xlnx,sdfec-code: + description: + The SD-FEC integrated block supports Low Density Parity Check (LDPC) + decoding and encoding and Turbo code decoding. The LDPC codes used are + highly configurable, and the specific code used can be specified on + a codeword-by-codeword basis. The Turbo code decoding is required by LTE + standard. + $ref: /schemas/types.yaml#/definitions/string + items: + enum: [ ldpc, turbo ] + + xlnx,sdfec-din-width: + description: + Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-din-words: + description: + A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + xlnx,sdfec-dout-width: + description: + Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b", + 2 a width of "2x128b" and 4 configures a width of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-dout-words: + description: + A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + - clocks + - clock-names + - xlnx,sdfec-code + - xlnx,sdfec-din-width + - xlnx,sdfec-din-words + - xlnx,sdfec-dout-width + - xlnx,sdfec-dout-words + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + reg = <0xa0040000 0x40000>; + clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>, + <&misc_clk_1>, <&misc_clk_1>; + clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk", + "s_axis_din_aclk", "m_axis_status_aclk", + "m_axis_dout_aclk"; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-dout-width = <1>; + xlnx,sdfec-dout-words = <0>; + }; + diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/Bindings/mmc/fsl-imx-esdhc.yaml index 82eb7a24c8..82f7ee8702 100644 --- a/dts/Bindings/mmc/fsl-imx-esdhc.yaml +++ b/dts/Bindings/mmc/fsl-imx-esdhc.yaml @@ -55,8 +55,9 @@ properties: - enum: - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - - fsl,imx93-usdhc - fsl,imx8ulp-usdhc + - fsl,imx93-usdhc + - fsl,imx95-usdhc - const: fsl,imx8mm-usdhc - items: - enum: @@ -162,6 +163,9 @@ properties: - const: ahb - const: per + iommus: + maxItems: 1 + power-domains: maxItems: 1 @@ -173,6 +177,11 @@ properties: - const: state_100mhz - const: state_200mhz - const: sleep + - minItems: 2 + items: + - const: default + - const: state_100mhz + - const: sleep - minItems: 1 items: - const: default diff --git a/dts/Bindings/mmc/fsl-imx-mmc.yaml b/dts/Bindings/mmc/fsl-imx-mmc.yaml index 221f5bc047..7911316fbd 100644 --- a/dts/Bindings/mmc/fsl-imx-mmc.yaml +++ b/dts/Bindings/mmc/fsl-imx-mmc.yaml @@ -24,6 +24,14 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + interrupts: maxItems: 1 @@ -34,6 +42,8 @@ properties: const: rx-tx required: + - clocks + - clock-names - compatible - reg - interrupts @@ -46,6 +56,8 @@ examples: compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <11>; + clocks = <&clks 29>, <&clks 60>; + clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; bus-width = <4>; diff --git a/dts/Bindings/mmc/hi3798cv200-dw-mshc.txt b/dts/Bindings/mmc/hi3798cv200-dw-mshc.txt deleted file mode 100644 index a0693b7145..0000000000 --- a/dts/Bindings/mmc/hi3798cv200-dw-mshc.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -Read synopsys-dw-mshc.txt for more details - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200 -specific extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: -- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc". -- clocks: A list of phandle + clock-specifier pairs for the clocks listed - in clock-names. -- clock-names: Should contain the following: - "ciu" - The ciu clock described in synopsys-dw-mshc.txt. - "biu" - The biu clock described in synopsys-dw-mshc.txt. - "ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling. - "ciu-drive" - Hi3798CV200 extended phase clock for ciu driving. - -Example: - - emmc: mmc@9830000 { - compatible = "hisilicon,hi3798cv200-dw-mshc"; - reg = <0x9830000 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HISTB_MMC_CIU_CLK>, - <&crg HISTB_MMC_BIU_CLK>, - <&crg HISTB_MMC_SAMPLE_CLK>, - <&crg HISTB_MMC_DRV_CLK>; - clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; - fifo-depth = <256>; - clock-frequency = <200000000>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - bus-width = <8>; - }; diff --git a/dts/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml b/dts/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml new file mode 100644 index 0000000000..41c9b22523 --- /dev/null +++ b/dts/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/hisilicon,hi3798cv200-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon HiSTB SoCs specific extensions to the Synopsys DWMMC controller + +maintainers: + - Yang Xiwen <forbidden405@outlook.com> + +properties: + compatible: + enum: + - hisilicon,hi3798cv200-dw-mshc + - hisilicon,hi3798mv200-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: bus interface unit clock + - description: card interface unit clock + - description: card input sample phase clock + - description: controller output drive phase clock + + clock-names: + items: + - const: ciu + - const: biu + - const: ciu-sample + - const: ciu-drive + + hisilicon,sap-dll-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + DWMMC core on Hi3798MV2x SoCs has a delay-locked-loop(DLL) attached to card data input path. + It is integrated into CRG core on the SoC and has to be controlled during tuning. + items: + - description: A phandle pointed to the CRG syscon node + - description: Sample DLL register offset in CRG address space + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: synopsys-dw-mshc-common.yaml# + + - if: + properties: + compatible: + contains: + const: hisilicon,hi3798mv200-dw-mshc + then: + required: + - hisilicon,sap-dll-reg + else: + properties: + hisilicon,sap-dll-reg: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/histb-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@9830000 { + compatible = "hisilicon,hi3798cv200-dw-mshc"; + reg = <0x9830000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_MMC_CIU_CLK>, + <&crg HISTB_MMC_BIU_CLK>, + <&crg HISTB_MMC_SAMPLE_CLK>, + <&crg HISTB_MMC_DRV_CLK>; + clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; + resets = <&crg 0xa0 4>; + reset-names = "reset"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 + &emmc_pins_3 &emmc_pins_4>; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + }; diff --git a/dts/Bindings/mmc/renesas,sdhi.yaml b/dts/Bindings/mmc/renesas,sdhi.yaml index f7a4c6bc70..29f2400247 100644 --- a/dts/Bindings/mmc/renesas,sdhi.yaml +++ b/dts/Bindings/mmc/renesas,sdhi.yaml @@ -67,6 +67,7 @@ properties: - renesas,sdhi-r8a779a0 # R-Car V3U - renesas,sdhi-r8a779f0 # R-Car S4-8 - renesas,sdhi-r8a779g0 # R-Car V4H + - renesas,sdhi-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-sdhi # R-Car Gen4 reg: diff --git a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml index 42804d9552..4d3031d996 100644 --- a/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/dts/Bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -19,6 +19,8 @@ properties: - rockchip,rk3568-dwcmshc - rockchip,rk3588-dwcmshc - snps,dwcmshc-sdhci + - sophgo,cv1800b-dwcmshc + - sophgo,sg2002-dwcmshc - thead,th1520-dwcmshc reg: diff --git a/dts/Bindings/mtd/atmel-nand.txt b/dts/Bindings/mtd/atmel-nand.txt index 50645828ac..4598930851 100644 --- a/dts/Bindings/mtd/atmel-nand.txt +++ b/dts/Bindings/mtd/atmel-nand.txt @@ -56,6 +56,7 @@ Required properties: "atmel,sama5d4-pmecc" "atmel,sama5d2-pmecc" "microchip,sam9x60-pmecc" + "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc" - reg: should contain 2 register ranges. The first one is pointing to the PMECC block, and the second one to the PMECC_ERRLOC block. diff --git a/dts/Bindings/mtd/brcm,brcmnand.yaml b/dts/Bindings/mtd/brcm,brcmnand.yaml index f57e96374e..064e840aea 100644 --- a/dts/Bindings/mtd/brcm,brcmnand.yaml +++ b/dts/Bindings/mtd/brcm,brcmnand.yaml @@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller maintainers: - Brian Norris <computersforpeace@gmail.com> - Kamal Dasu <kdasu.kdev@gmail.com> + - William Zhang <william.zhang@broadcom.com> description: | The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND @@ -18,9 +19,10 @@ description: | supports basic PROGRAM and READ functions, among other features. This controller was originally designed for STB SoCs (BCM7xxx) but is now - available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and - iProc/Cygnus. Its history includes several similar (but not fully register - compatible) versions. + available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based + Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus. + Its history includes several similar (but not fully register compatible) + versions. -- Additional SoC-specific NAND controller properties -- @@ -53,7 +55,7 @@ properties: - brcm,brcmnand-v7.2 - brcm,brcmnand-v7.3 - const: brcm,brcmnand - - description: BCM63138 SoC-specific NAND controller + - description: BCMBCA SoC-specific NAND controller items: - const: brcm,nand-bcm63138 - enum: @@ -111,6 +113,13 @@ properties: earlier versions of this core that include WP type: boolean + brcm,wp-not-connected: + description: + Use this property when WP pin is not physically wired to the NAND chip. + Write protection feature cannot be used. By default, controller assumes + the pin is connected and feature is used. + $ref: /schemas/types.yaml#/definitions/flag + patternProperties: "^nand@[a-f0-9]$": type: object @@ -137,6 +146,15 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + brcm,nand-ecc-use-strap: + description: + This property requires the host system to get the ECC related + settings from the SoC NAND boot strap configuration instead of + the generic NAND ECC settings. This is a common hardware design + on BCMBCA based boards. This strap ECC option and generic NAND + ECC option can not be specified at the same time. + $ref: /schemas/types.yaml#/definitions/flag + unevaluatedProperties: false allOf: @@ -177,6 +195,8 @@ allOf: - const: iproc-idm - const: iproc-ext - if: + required: + - interrupts properties: interrupts: minItems: 2 @@ -184,12 +204,26 @@ allOf: required: - interrupt-names + - if: + patternProperties: + "^nand@[a-f0-9]$": + required: + - brcm,nand-ecc-use-strap + then: + patternProperties: + "^nand@[a-f0-9]$": + properties: + nand-ecc-strength: false + nand-ecc-step-size: false + nand-ecc-maximize: false + nand-ecc-algo: false + brcm,nand-oob-sector-size: false + unevaluatedProperties: false required: - reg - reg-names - - interrupts examples: - | diff --git a/dts/Bindings/mtd/davinci-nand.txt b/dts/Bindings/mtd/davinci-nand.txt index edebeae1f5..eb8e2ff4db 100644 --- a/dts/Bindings/mtd/davinci-nand.txt +++ b/dts/Bindings/mtd/davinci-nand.txt @@ -68,7 +68,7 @@ Deprecated properties: false. Nand device bindings may contain additional sub-nodes describing partitions of -the address space. See partition.txt for more detail. The NAND Flash timing +the address space. See mtd.yaml for more detail. The NAND Flash timing values must be programmed in the chip select’s node of AEMIF memory-controller (see Documentation/devicetree/bindings/memory-controllers/ davinci-aemif.txt). diff --git a/dts/Bindings/mtd/flctl-nand.txt b/dts/Bindings/mtd/flctl-nand.txt index 427f46dc60..51518399d7 100644 --- a/dts/Bindings/mtd/flctl-nand.txt +++ b/dts/Bindings/mtd/flctl-nand.txt @@ -15,7 +15,7 @@ The DMA fields are not used yet in the driver but are listed here for completing the bindings. The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Example: diff --git a/dts/Bindings/mtd/fsl-upm-nand.txt b/dts/Bindings/mtd/fsl-upm-nand.txt index 25f07c1f9e..530c017e01 100644 --- a/dts/Bindings/mtd/fsl-upm-nand.txt +++ b/dts/Bindings/mtd/fsl-upm-nand.txt @@ -22,7 +22,7 @@ Deprecated properties: (R/B# pins not connected). Each flash chip described may optionally contain additional sub-nodes -describing partitions of the address space. See partition.txt for more +describing partitions of the address space. See mtd.yaml for more detail. Examples: diff --git a/dts/Bindings/mtd/gpio-control-nand.txt b/dts/Bindings/mtd/gpio-control-nand.txt index 486a17d533..0edf55d47e 100644 --- a/dts/Bindings/mtd/gpio-control-nand.txt +++ b/dts/Bindings/mtd/gpio-control-nand.txt @@ -26,7 +26,7 @@ Optional properties: read to ensure that the GPIO accesses have completed. The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Examples: diff --git a/dts/Bindings/mtd/gpmi-nand.yaml b/dts/Bindings/mtd/gpmi-nand.yaml index ba086c3462..021c0da0b0 100644 --- a/dts/Bindings/mtd/gpmi-nand.yaml +++ b/dts/Bindings/mtd/gpmi-nand.yaml @@ -12,7 +12,7 @@ maintainers: description: | The GPMI nand controller provides an interface to control the NAND flash chips. The device tree may optionally contain sub-nodes - describing partitions of the address space. See partition.txt for + describing partitions of the address space. See mtd.yaml for more detail. properties: diff --git a/dts/Bindings/mtd/hisi504-nand.txt b/dts/Bindings/mtd/hisi504-nand.txt index 8963983ae7..362203e7d5 100644 --- a/dts/Bindings/mtd/hisi504-nand.txt +++ b/dts/Bindings/mtd/hisi504-nand.txt @@ -22,7 +22,7 @@ The following ECC strength and step size are currently supported: - nand-ecc-strength = <16>, nand-ecc-step-size = <1024> Flash chip may optionally contain additional sub-nodes describing partitions of -the address space. See partition.txt for more detail. +the address space. See mtd.yaml for more detail. Example: diff --git a/dts/Bindings/mtd/jedec,spi-nor.yaml b/dts/Bindings/mtd/jedec,spi-nor.yaml index 58f0cea160..6e3afb4292 100644 --- a/dts/Bindings/mtd/jedec,spi-nor.yaml +++ b/dts/Bindings/mtd/jedec,spi-nor.yaml @@ -52,6 +52,9 @@ properties: minItems: 1 maxItems: 2 + interrupts: + maxItems: 1 + m25p,fast-read: type: boolean description: diff --git a/dts/Bindings/mtd/mtd.yaml b/dts/Bindings/mtd/mtd.yaml index f322290ee5..ee442ecb11 100644 --- a/dts/Bindings/mtd/mtd.yaml +++ b/dts/Bindings/mtd/mtd.yaml @@ -10,6 +10,8 @@ maintainers: - Miquel Raynal <miquel.raynal@bootlin.com> - Richard Weinberger <richard@nod.at> +select: false + properties: $nodename: pattern: "^(flash|.*sram|nand)(@.*)?$" diff --git a/dts/Bindings/mtd/nvidia-tegra20-nand.txt b/dts/Bindings/mtd/nvidia-tegra20-nand.txt index e737e5beb7..4a00ec2b25 100644 --- a/dts/Bindings/mtd/nvidia-tegra20-nand.txt +++ b/dts/Bindings/mtd/nvidia-tegra20-nand.txt @@ -39,7 +39,7 @@ Optional children node properties: - wp-gpios: GPIO specifier for the write protect pin. Optional child node of NAND chip nodes: -Partitions: see partition.txt +Partitions: see mtd.yaml Example: nand-controller@70008000 { diff --git a/dts/Bindings/mtd/orion-nand.txt b/dts/Bindings/mtd/orion-nand.txt index 2d6ab660e6..b9997b1f13 100644 --- a/dts/Bindings/mtd/orion-nand.txt +++ b/dts/Bindings/mtd/orion-nand.txt @@ -13,7 +13,7 @@ Optional properties: registers in usecs The device tree may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. +address space. See mtd.yaml for more detail. Example: diff --git a/dts/Bindings/mtd/partitions/linux,ubi.yaml b/dts/Bindings/mtd/partitions/linux,ubi.yaml new file mode 100644 index 0000000000..27e1ac1f25 --- /dev/null +++ b/dts/Bindings/mtd/partitions/linux,ubi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unsorted Block Images + +description: | + UBI ("Unsorted Block Images") is a volume management system for raw + flash devices which manages multiple logical volumes on a single + physical flash device and spreads the I/O load (i.e wear-leveling) + across the whole flash chip. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +allOf: + - $ref: partition.yaml# + +properties: + compatible: + const: linux,ubi + + volumes: + type: object + description: UBI Volumes + + patternProperties: + "^ubi-volume-.*$": + $ref: /schemas/mtd/partitions/ubi-volume.yaml# + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x1ff00000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-caldata { + volid = <2>; + volname = "rf"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mtd/partitions/ubi-volume.yaml b/dts/Bindings/mtd/partitions/ubi-volume.yaml new file mode 100644 index 0000000000..19736b2605 --- /dev/null +++ b/dts/Bindings/mtd/partitions/ubi-volume.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UBI volume + +description: | + This binding describes a single UBI volume. Volumes can be matches either + by their ID or their name, or both. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +properties: + volid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Match UBI volume ID + + volname: + $ref: /schemas/types.yaml#/definitions/string + description: + Match UBI volume ID + + nvmem-layout: + $ref: /schemas/nvmem/layouts/nvmem-layout.yaml# + description: + This container may reference an NVMEM layout parser. + +anyOf: + - required: + - volid + + - required: + - volname + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/dts/Bindings/mtd/samsung-s3c2410.txt b/dts/Bindings/mtd/samsung-s3c2410.txt index 09815c40fc..6354553506 100644 --- a/dts/Bindings/mtd/samsung-s3c2410.txt +++ b/dts/Bindings/mtd/samsung-s3c2410.txt @@ -19,7 +19,7 @@ Optional child properties: Each child device node may optionally contain a 'partitions' sub-node, which further contains sub-nodes describing the flash partition mapping. -See partition.txt for more detail. +See mtd.yaml for more detail. Example: diff --git a/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml index e72cb5baca..b8ef9ba88e 100644 --- a/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/dts/Bindings/mtd/st,stm32-fmc2-nand.yaml @@ -14,10 +14,11 @@ properties: enum: - st,stm32mp15-fmc2 - st,stm32mp1-fmc2-nfc + - st,stm32mp25-fmc2-nfc reg: minItems: 6 - maxItems: 7 + maxItems: 12 interrupts: maxItems: 1 @@ -92,6 +93,28 @@ allOf: - description: Chip select 1 command - description: Chip select 1 address space + - if: + properties: + compatible: + contains: + const: st,stm32mp25-fmc2-nfc + then: + properties: + reg: + items: + - description: Chip select 0 data + - description: Chip select 0 command + - description: Chip select 0 address space + - description: Chip select 1 data + - description: Chip select 1 command + - description: Chip select 1 address space + - description: Chip select 2 data + - description: Chip select 2 command + - description: Chip select 2 address space + - description: Chip select 3 data + - description: Chip select 3 command + - description: Chip select 3 address space + required: - compatible - reg diff --git a/dts/Bindings/mux/mux-controller.yaml b/dts/Bindings/mux/mux-controller.yaml index 8b943082a2..571ad9e13e 100644 --- a/dts/Bindings/mux/mux-controller.yaml +++ b/dts/Bindings/mux/mux-controller.yaml @@ -74,7 +74,7 @@ select: properties: $nodename: - pattern: '^mux-controller(@.*|-[0-9a-f]+)?$' + pattern: '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$' '#mux-control-cells': enum: [ 0, 1 ] diff --git a/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml index eba2f3026a..055a335188 100644 --- a/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Bluetooth Chips maintainers: - - Balakrishna Godavarthi <bgodavar@codeaurora.org> - - Rocky Liao <rjliao@codeaurora.org> + - Balakrishna Godavarthi <quic_bgodavar@quicinc.com> + - Rocky Liao <quic_rjliao@quicinc.com> description: This binding describes Qualcomm UART-attached bluetooth chips. @@ -94,6 +94,10 @@ properties: local-bd-address: true + qcom,local-bd-address-broken: + type: boolean + description: + boot firmware is incorrectly passing the address in big-endian order required: - compatible diff --git a/dts/Bindings/net/brcm,asp-v2.0.yaml b/dts/Bindings/net/brcm,asp-v2.0.yaml index 75d8138298..660e2ca42d 100644 --- a/dts/Bindings/net/brcm,asp-v2.0.yaml +++ b/dts/Bindings/net/brcm,asp-v2.0.yaml @@ -17,6 +17,10 @@ properties: oneOf: - items: - enum: + - brcm,bcm74165b0-asp + - const: brcm,asp-v2.2 + - items: + - enum: - brcm,bcm74165-asp - const: brcm,asp-v2.1 - items: diff --git a/dts/Bindings/net/brcm,unimac-mdio.yaml b/dts/Bindings/net/brcm,unimac-mdio.yaml index 6684810fcb..23dfe0838d 100644 --- a/dts/Bindings/net/brcm,unimac-mdio.yaml +++ b/dts/Bindings/net/brcm,unimac-mdio.yaml @@ -24,6 +24,7 @@ properties: - brcm,genet-mdio-v5 - brcm,asp-v2.0-mdio - brcm,asp-v2.1-mdio + - brcm,asp-v2.2-mdio - brcm,unimac-mdio reg: diff --git a/dts/Bindings/net/can/fsl,flexcan.yaml b/dts/Bindings/net/can/fsl,flexcan.yaml index 4162469c3c..f197d9b516 100644 --- a/dts/Bindings/net/can/fsl,flexcan.yaml +++ b/dts/Bindings/net/can/fsl,flexcan.yaml @@ -39,6 +39,9 @@ properties: - fsl,imx6sx-flexcan - const: fsl,imx6q-flexcan - items: + - const: fsl,imx95-flexcan + - const: fsl,imx93-flexcan + - items: - enum: - fsl,ls1028ar1-flexcan - const: fsl,lx2160ar1-flexcan diff --git a/dts/Bindings/net/can/microchip,mpfs-can.yaml b/dts/Bindings/net/can/microchip,mpfs-can.yaml index 45aa3de7cf..01e4d4a54d 100644 --- a/dts/Bindings/net/can/microchip,mpfs-can.yaml +++ b/dts/Bindings/net/can/microchip,mpfs-can.yaml @@ -24,7 +24,9 @@ properties: maxItems: 1 clocks: - maxItems: 1 + items: + - description: AHB peripheral clock + - description: CAN bus clock required: - compatible @@ -39,7 +41,7 @@ examples: can@2010c000 { compatible = "microchip,mpfs-can"; reg = <0x2010c000 0x1000>; - clocks = <&clkcfg 17>; + clocks = <&clkcfg 17>, <&clkcfg 37>; interrupt-parent = <&plic>; interrupts = <56>; }; diff --git a/dts/Bindings/net/can/tcan4x5x.txt b/dts/Bindings/net/can/tcan4x5x.txt index 170e23f061..20c0572c98 100644 --- a/dts/Bindings/net/can/tcan4x5x.txt +++ b/dts/Bindings/net/can/tcan4x5x.txt @@ -28,6 +28,8 @@ Optional properties: available with tcan4552/4553. - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not available with tcan4552/4553. + - wakeup-source: Leave the chip running when suspended, and configure + the RX interrupt to wake up the device. Example: tcan4x5x: tcan4x5x@0 { @@ -42,4 +44,5 @@ tcan4x5x: tcan4x5x@0 { device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + wakeup-source; }; diff --git a/dts/Bindings/net/can/xilinx,can.yaml b/dts/Bindings/net/can/xilinx,can.yaml index 64d57c343e..8d4e5af6fd 100644 --- a/dts/Bindings/net/can/xilinx,can.yaml +++ b/dts/Bindings/net/can/xilinx,can.yaml @@ -49,6 +49,10 @@ properties: resets: maxItems: 1 + xlnx,has-ecc: + $ref: /schemas/types.yaml#/definitions/flag + description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN) + required: - compatible - reg @@ -137,6 +141,7 @@ examples: interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + xlnx,has-ecc; }; - | diff --git a/dts/Bindings/net/cdns,macb.yaml b/dts/Bindings/net/cdns,macb.yaml index bf8894a025..2c71e2cf3a 100644 --- a/dts/Bindings/net/cdns,macb.yaml +++ b/dts/Bindings/net/cdns,macb.yaml @@ -59,6 +59,11 @@ properties: - cdns,gem # Generic - cdns,macb # Generic + - items: + - enum: + - microchip,sam9x7-gem # Microchip SAM9X7 gigabit ethernet interface + - const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + reg: minItems: 1 items: diff --git a/dts/Bindings/net/dsa/ar9331.txt b/dts/Bindings/net/dsa/ar9331.txt deleted file mode 100644 index f824fdae0d..0000000000 --- a/dts/Bindings/net/dsa/ar9331.txt +++ /dev/null @@ -1,147 +0,0 @@ -Atheros AR9331 built-in switch -============================= - -It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal -MDIO bus. All PHYs are built-in as well. - -Required properties: - - - compatible: should be: "qca,ar9331-switch" - - reg: Address on the MII bus for the switch. - - resets : Must contain an entry for each entry in reset-names. - - reset-names : Must include the following entries: "switch" - - interrupt-parent: Phandle to the parent interrupt controller - - interrupts: IRQ line for the switch - - interrupt-controller: Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. - - #interrupt-cells: must be 1 - - mdio: Container of PHY and devices on the switches MDIO bus. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. -Examples: - -eth0: ethernet@19000000 { - compatible = "qca,ar9330-eth"; - reg = <0x19000000 0x200>; - interrupts = <4>; - - resets = <&rst 9>, <&rst 22>; - reset-names = "mac", "mdio"; - clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; - clock-names = "eth", "mdio"; - - phy-mode = "mii"; - phy-handle = <&phy_port4>; -}; - -eth1: ethernet@1a000000 { - compatible = "qca,ar9330-eth"; - reg = <0x1a000000 0x200>; - interrupts = <5>; - resets = <&rst 13>, <&rst 23>; - reset-names = "mac", "mdio"; - clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; - clock-names = "eth", "mdio"; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch10: switch@10 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "qca,ar9331-switch"; - reg = <0x10>; - resets = <&rst 8>; - reset-names = "switch"; - - interrupt-parent = <&miscintc>; - interrupts = <12>; - - interrupt-controller; - #interrupt-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch_port0: port@0 { - reg = <0x0>; - ethernet = <ð1>; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch_port1: port@1 { - reg = <0x1>; - phy-handle = <&phy_port0>; - phy-mode = "internal"; - }; - - switch_port2: port@2 { - reg = <0x2>; - phy-handle = <&phy_port1>; - phy-mode = "internal"; - }; - - switch_port3: port@3 { - reg = <0x3>; - phy-handle = <&phy_port2>; - phy-mode = "internal"; - }; - - switch_port4: port@4 { - reg = <0x4>; - phy-handle = <&phy_port3>; - phy-mode = "internal"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&switch10>; - - phy_port0: phy@0 { - reg = <0x0>; - interrupts = <0>; - }; - - phy_port1: phy@1 { - reg = <0x1>; - interrupts = <0>; - }; - - phy_port2: phy@2 { - reg = <0x2>; - interrupts = <0>; - }; - - phy_port3: phy@3 { - reg = <0x3>; - interrupts = <0>; - }; - - phy_port4: phy@4 { - reg = <0x4>; - interrupts = <0>; - }; - }; - }; - }; -}; diff --git a/dts/Bindings/net/dsa/microchip,ksz.yaml b/dts/Bindings/net/dsa/microchip,ksz.yaml index c963dc09e8..52acc15ebc 100644 --- a/dts/Bindings/net/dsa/microchip,ksz.yaml +++ b/dts/Bindings/net/dsa/microchip,ksz.yaml @@ -31,6 +31,7 @@ properties: - microchip,ksz9893 - microchip,ksz9563 - microchip,ksz8563 + - microchip,ksz8567 reset-gpios: description: diff --git a/dts/Bindings/net/dsa/qca,ar9331.yaml b/dts/Bindings/net/dsa/qca,ar9331.yaml new file mode 100644 index 0000000000..fd9ddc59d3 --- /dev/null +++ b/dts/Bindings/net/dsa/qca,ar9331.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR9331 built-in switch + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: + Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and + addressable over internal MDIO bus. All PHYs are built-in as well. + +properties: + compatible: + const: qca,ar9331-switch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + properties: + interrupt-parent: true + + patternProperties: + '(ethernet-)?phy@[0-4]+$': + type: object + unevaluatedProperties: false + + properties: + reg: true + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: switch + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - mdio + - ports + - resets + - reset-names + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + compatible = "qca,ar9331-switch"; + reg = <0x10>; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + interrupt-controller; + #interrupt-cells = <1>; + + resets = <&rst 8>; + reset-names = "switch"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + }; + + port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + }; + + port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + }; + + port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: ethernet-phy@0 { + reg = <0x0>; + interrupts = <0>; + }; + + phy_port1: ethernet-phy@1 { + reg = <0x1>; + interrupts = <0>; + }; + + phy_port2: ethernet-phy@2 { + reg = <0x2>; + interrupts = <0>; + }; + + phy_port3: ethernet-phy@3 { + reg = <0x3>; + interrupts = <0>; + }; + + phy_port4: ethernet-phy@4 { + reg = <0x4>; + interrupts = <0>; + }; + }; + }; + }; diff --git a/dts/Bindings/net/dsa/realtek.yaml b/dts/Bindings/net/dsa/realtek.yaml index cce692f57b..70b6bda3cf 100644 --- a/dts/Bindings/net/dsa/realtek.yaml +++ b/dts/Bindings/net/dsa/realtek.yaml @@ -59,6 +59,9 @@ properties: description: GPIO to be used to reset the whole device maxItems: 1 + resets: + maxItems: 1 + realtek,disable-leds: type: boolean description: | @@ -127,7 +130,6 @@ else: - mdc-gpios - mdio-gpios - mdio - - reset-gpios required: - compatible diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml index d14d123ad7..b2785b0313 100644 --- a/dts/Bindings/net/ethernet-controller.yaml +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -14,7 +14,6 @@ properties: pattern: "^ethernet(@.*)?$" label: - $ref: /schemas/types.yaml#/definitions/string description: Human readable label on a port of a box. local-mac-address: diff --git a/dts/Bindings/net/ethernet-phy-package.yaml b/dts/Bindings/net/ethernet-phy-package.yaml new file mode 100644 index 0000000000..e567101e6f --- /dev/null +++ b/dts/Bindings/net/ethernet-phy-package.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet PHY Package Common Properties + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: + PHY packages are multi-port Ethernet PHY of the same family + and each Ethernet PHY is affected by the global configuration + of the PHY package. + + Each reg of the PHYs defined in the PHY package node is + absolute and describe the real address of the Ethernet PHY on + the MDIO bus. + +properties: + $nodename: + pattern: "^ethernet-phy-package@[a-f0-9]+$" + + reg: + minimum: 0 + maximum: 31 + description: + The base ID number for the PHY package. + Commonly the ID of the first PHY in the PHY package. + + Some PHY in the PHY package might be not defined but + still occupy ID on the device (just not attached to + anything) hence the PHY package reg might correspond + to a not attached PHY (offset 0). + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + ^ethernet-phy@[a-f0-9]+$: + $ref: ethernet-phy.yaml# + +required: + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: true diff --git a/dts/Bindings/net/fsl,fec.yaml b/dts/Bindings/net/fsl,fec.yaml index 8948a11c99..5536c06139 100644 --- a/dts/Bindings/net/fsl,fec.yaml +++ b/dts/Bindings/net/fsl,fec.yaml @@ -224,6 +224,9 @@ properties: Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. + iommus: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/net/mediatek,net.yaml b/dts/Bindings/net/mediatek,net.yaml index e74502a0af..3202dc7967 100644 --- a/dts/Bindings/net/mediatek,net.yaml +++ b/dts/Bindings/net/mediatek,net.yaml @@ -337,8 +337,8 @@ allOf: minItems: 4 clocks: - minItems: 34 - maxItems: 34 + minItems: 24 + maxItems: 24 clock-names: items: @@ -351,18 +351,6 @@ allOf: - const: ethwarp_wocpu1 - const: ethwarp_wocpu0 - const: esw - - const: netsys0 - - const: netsys1 - - const: sgmii_tx250m - - const: sgmii_rx250m - - const: sgmii2_tx250m - - const: sgmii2_rx250m - - const: top_usxgmii0_sel - - const: top_usxgmii1_sel - - const: top_sgm0_sel - - const: top_sgm1_sel - - const: top_xfi_phy0_xtal_sel - - const: top_xfi_phy1_xtal_sel - const: top_eth_gmii_sel - const: top_eth_refck_50m_sel - const: top_eth_sys_200m_sel @@ -375,16 +363,10 @@ allOf: - const: top_netsys_sync_250m_sel - const: top_netsys_ppefb_250m_sel - const: top_netsys_warp_sel - - const: wocpu1 - - const: wocpu0 - const: xgp1 - const: xgp2 - const: xgp3 - mediatek,sgmiisys: - minItems: 2 - maxItems: 2 - patternProperties: "^mac@[0-1]$": type: object diff --git a/dts/Bindings/net/nfc/ti,trf7970a.yaml b/dts/Bindings/net/nfc/ti,trf7970a.yaml index 9cc236ec42..d0332eb76a 100644 --- a/dts/Bindings/net/nfc/ti,trf7970a.yaml +++ b/dts/Bindings/net/nfc/ti,trf7970a.yaml @@ -73,7 +73,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/net/qca,qca808x.yaml b/dts/Bindings/net/qca,qca808x.yaml new file mode 100644 index 0000000000..e255265590 --- /dev/null +++ b/dts/Bindings/net/qca,qca808x.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qca,qca808x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros QCA808X PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: + QCA808X PHYs can have up to 3 LEDs attached. + All 3 LEDs are disabled by default. + 2 LEDs have dedicated pins with the 3rd LED having the + double function of Interrupt LEDs/GPIO or additional LED. + + By default this special PIN is set to LED function. + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + enum: + - ethernet-phy-id004d.d101 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id004d.d101"; + reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; + }; + }; diff --git a/dts/Bindings/net/qcom,ethqos.yaml b/dts/Bindings/net/qcom,ethqos.yaml index 7bdb412a01..69a337c7e3 100644 --- a/dts/Bindings/net/qcom,ethqos.yaml +++ b/dts/Bindings/net/qcom,ethqos.yaml @@ -37,12 +37,14 @@ properties: items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state + - description: The interrupt that occurs when HW safety error triggered interrupt-names: minItems: 1 items: - const: macirq - - const: eth_lpi + - enum: [eth_lpi, sfty] + - const: sfty clocks: maxItems: 4 @@ -89,8 +91,9 @@ examples: <&gcc GCC_ETH_PTP_CLK>, <&gcc GCC_ETH_RGMII_CLK>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_lpi"; + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi", "sfty"; rx-fifo-depth = <4096>; tx-fifo-depth = <4096>; diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml index c30218684c..53cae71d99 100644 --- a/dts/Bindings/net/qcom,ipa.yaml +++ b/dts/Bindings/net/qcom,ipa.yaml @@ -159,7 +159,7 @@ properties: when the AP (not the modem) performs early initialization. firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when diff --git a/dts/Bindings/net/qcom,ipq4019-mdio.yaml b/dts/Bindings/net/qcom,ipq4019-mdio.yaml index 3407e909e8..0029e197a8 100644 --- a/dts/Bindings/net/qcom,ipq4019-mdio.yaml +++ b/dts/Bindings/net/qcom,ipq4019-mdio.yaml @@ -44,6 +44,21 @@ properties: items: - const: gcc_mdio_ahb_clk + clock-frequency: + description: + The MDIO bus clock that must be output by the MDIO bus hardware, if + absent, the default hardware values are used. + + MDC rate is feed by an external clock (fixed 100MHz) and is divider + internally. The default divider is /256 resulting in the default rate + applied of 390KHz. + + To follow 802.3 standard that instruct up to 2.5MHz by default, if + this property is not declared and the divider is set to /256, by + default 1.5625Mhz is select. + enum: [ 390625, 781250, 1562500, 3125000, 6250000, 12500000 ] + default: 1562500 + required: - compatible - reg diff --git a/dts/Bindings/net/qcom,qca807x.yaml b/dts/Bindings/net/qcom,qca807x.yaml new file mode 100644 index 0000000000..7290024024 --- /dev/null +++ b/dts/Bindings/net/qcom,qca807x.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCA807x Ethernet PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + - Robert Marko <robert.marko@sartura.hr> + +description: | + Qualcomm QCA8072/5 Ethernet PHY is PHY package of 2 or 5 + IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and + 1000BASE-T PHY-s. + + They feature 2 SerDes, one for PSGMII or QSGMII connection with + MAC, while second one is SGMII for connection to MAC or fiber. + + Both models have a combo port that supports 1000BASE-X and + 100BASE-FX fiber. + + Each PHY inside of QCA807x series has 4 digitally controlled + output only pins that natively drive LED-s for up to 2 attached + LEDs. Some vendor also use these 4 output for GPIO usage without + attaching LEDs. + + Note that output pins can be set to drive LEDs OR GPIO, mixed + definition are not accepted. + +$ref: ethernet-phy-package.yaml# + +properties: + compatible: + enum: + - qcom,qca8072-package + - qcom,qca8075-package + + qcom,package-mode: + description: | + PHY package can be configured in 3 mode following this table: + + First Serdes mode Second Serdes mode + Option 1 PSGMII for copper Disabled + ports 0-4 + Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX + ports 0-4 + Option 3 QSGMII for copper SGMII for + ports 0-3 copper port 4 + + PSGMII mode (option 1 or 2) is configured dynamically based on + the presence of a connected SFP device. + $ref: /schemas/types.yaml#/definitions/string + enum: + - qsgmii + - psgmii + default: psgmii + + qcom,tx-drive-strength-milliwatt: + description: set the TX Amplifier value in mv. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [140, 160, 180, 200, 220, + 240, 260, 280, 300, 320, + 400, 500, 600] + default: 600 + +patternProperties: + ^ethernet-phy@[a-f0-9]+$: + $ref: ethernet-phy.yaml# + + properties: + qcom,dac-full-amplitude: + description: + Set Analog MDI driver amplitude to FULL. + + With this not defined, amplitude is set to DSP. + (amplitude is adjusted based on cable length) + + With this enabled and qcom,dac-full-bias-current + and qcom,dac-disable-bias-current-tweak disabled, + bias current is half. + type: boolean + + qcom,dac-full-bias-current: + description: + Set Analog MDI driver bias current to FULL. + + With this not defined, bias current is set to DSP. + (bias current is adjusted based on cable length) + + Actual bias current might be different with + qcom,dac-disable-bias-current-tweak disabled. + type: boolean + + qcom,dac-disable-bias-current-tweak: + description: | + Set Analog MDI driver bias current to disable tweak + to bias current. + + With this not defined, bias current tweak are enabled + by default. + + With this enabled the following tweak are NOT applied: + - With both FULL amplitude and FULL bias current: bias current + is set to half. + - With only DSP amplitude: bias current is set to half and + is set to 1/4 with cable < 10m. + - With DSP bias current (included both DSP amplitude and + DSP bias current): bias current is half the detected current + with cable < 10m. + type: boolean + + gpio-controller: true + + '#gpio-cells': + const: 2 + + if: + required: + - gpio-controller + then: + properties: + leds: false + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy-package@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,qca8075-package"; + reg = <0>; + + qcom,package-mode = "qsgmii"; + + ethernet-phy@0 { + reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + ethernet-phy@1 { + reg = <1>; + }; + + ethernet-phy@2 { + reg = <2>; + + gpio-controller; + #gpio-cells = <2>; + }; + + ethernet-phy@3 { + reg = <3>; + }; + + ethernet-phy@4 { + reg = <4>; + }; + }; + }; diff --git a/dts/Bindings/net/renesas,etheravb.yaml b/dts/Bindings/net/renesas,etheravb.yaml index 890f7858d0..de7ba7f345 100644 --- a/dts/Bindings/net/renesas,etheravb.yaml +++ b/dts/Bindings/net/renesas,etheravb.yaml @@ -46,6 +46,7 @@ properties: - enum: - renesas,etheravb-r8a779a0 # R-Car V3U - renesas,etheravb-r8a779g0 # R-Car V4H + - renesas,etheravb-r8a779h0 # R-Car V4M - const: renesas,etheravb-rcar-gen4 # R-Car Gen4 - items: diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml index 5c2769dc68..6b0341a8e0 100644 --- a/dts/Bindings/net/snps,dwmac.yaml +++ b/dts/Bindings/net/snps,dwmac.yaml @@ -95,6 +95,7 @@ properties: - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 + - starfive,jh7100-dwmac - starfive,jh7110-dwmac reg: @@ -107,13 +108,15 @@ properties: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection - description: The interrupt that occurs when Rx exits the LPI state + - description: The interrupt that occurs when HW safety error triggered interrupt-names: minItems: 1 items: - const: macirq - - enum: [eth_wake_irq, eth_lpi] - - const: eth_lpi + - enum: [eth_wake_irq, eth_lpi, sfty] + - enum: [eth_wake_irq, eth_lpi, sfty] + - enum: [eth_wake_irq, eth_lpi, sfty] clocks: minItems: 1 @@ -144,10 +147,12 @@ properties: - description: AHB reset reset-names: - minItems: 1 - items: - - const: stmmaceth - - const: ahb + oneOf: + - items: + - enum: [stmmaceth, ahb] + - items: + - const: stmmaceth + - const: ahb power-domains: maxItems: 1 diff --git a/dts/Bindings/net/starfive,jh7110-dwmac.yaml b/dts/Bindings/net/starfive,jh7110-dwmac.yaml index 5e7cfbbebc..0d1962980f 100644 --- a/dts/Bindings/net/starfive,jh7110-dwmac.yaml +++ b/dts/Bindings/net/starfive,jh7110-dwmac.yaml @@ -16,16 +16,20 @@ select: compatible: contains: enum: + - starfive,jh7100-dwmac - starfive,jh7110-dwmac required: - compatible properties: compatible: - items: - - enum: - - starfive,jh7110-dwmac - - const: snps,dwmac-5.20 + oneOf: + - items: + - const: starfive,jh7100-dwmac + - const: snps,dwmac + - items: + - const: starfive,jh7110-dwmac + - const: snps,dwmac-5.20 reg: maxItems: 1 @@ -46,24 +50,6 @@ properties: - const: tx - const: gtx - interrupts: - minItems: 3 - maxItems: 3 - - interrupt-names: - minItems: 3 - maxItems: 3 - - resets: - items: - - description: MAC Reset signal. - - description: AHB Reset signal. - - reset-names: - items: - - const: stmmaceth - - const: ahb - starfive,tx-use-rgmii-clk: description: Tx clock is provided by external rgmii clock. @@ -94,6 +80,48 @@ required: allOf: - $ref: snps,dwmac.yaml# + - if: + properties: + compatible: + contains: + const: starfive,jh7100-dwmac + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + minItems: 2 + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + const: ahb + + - if: + properties: + compatible: + contains: + const: starfive,jh7110-dwmac + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + + interrupt-names: + minItems: 3 + maxItems: 3 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + unevaluatedProperties: false examples: diff --git a/dts/Bindings/net/ti,cpsw-switch.yaml b/dts/Bindings/net/ti,cpsw-switch.yaml index f07ae3173b..d5bd93ee4d 100644 --- a/dts/Bindings/net/ti,cpsw-switch.yaml +++ b/dts/Bindings/net/ti,cpsw-switch.yaml @@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI SoC Ethernet Switch Controller (CPSW) maintainers: - - Grygorii Strashko <grygorii.strashko@ti.com> - - Sekhar Nori <nsekhar@ti.com> + - Siddharth Vadapalli <s-vadapalli@ti.com> + - Ravi Gunasekaran <r-gunasekaran@ti.com> + - Roger Quadros <rogerq@kernel.org> description: The 3-port switch gigabit ethernet subsystem provides ethernet packet diff --git a/dts/Bindings/net/ti,dp83822.yaml b/dts/Bindings/net/ti,dp83822.yaml index db74474207..784866ea39 100644 --- a/dts/Bindings/net/ti,dp83822.yaml +++ b/dts/Bindings/net/ti,dp83822.yaml @@ -62,6 +62,40 @@ properties: for the PHY. The internal delay for the PHY is fixed to 3.5ns relative to transmit data. + ti,cfg-dac-minus-one-bp: + description: | + DP83826 PHY only. + Sets the voltage ratio (with respect to the nominal value) + of the logical level -1 for the MLT-3 encoded TX data. + enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000, + 10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000] + default: 10000 + + ti,cfg-dac-plus-one-bp: + description: | + DP83826 PHY only. + Sets the voltage ratio (with respect to the nominal value) + of the logical level +1 for the MLT-3 encoded TX data. + enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000, + 10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000] + default: 10000 + + ti,rmii-mode: + description: | + If present, select the RMII operation mode. Two modes are + available: + - RMII master, where the PHY outputs a 50MHz reference clock which can + be connected to the MAC. + - RMII slave, where the PHY expects a 50MHz reference clock input + shared with the MAC. + The RMII operation mode can also be configured by its straps. + If the strap pin is not set correctly or not set at all, then this can be + used to configure it. + $ref: /schemas/types.yaml#/definitions/string + enum: + - master + - slave + required: - reg diff --git a/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml index c9c25132d1..73ed5951d2 100644 --- a/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) maintainers: - - Grygorii Strashko <grygorii.strashko@ti.com> - - Sekhar Nori <nsekhar@ti.com> + - Siddharth Vadapalli <s-vadapalli@ti.com> + - Ravi Gunasekaran <r-gunasekaran@ti.com> + - Roger Quadros <rogerq@kernel.org> description: The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports diff --git a/dts/Bindings/net/ti,k3-am654-cpts.yaml b/dts/Bindings/net/ti,k3-am654-cpts.yaml index 3e910d3b24..b1c8753257 100644 --- a/dts/Bindings/net/ti,k3-am654-cpts.yaml +++ b/dts/Bindings/net/ti,k3-am654-cpts.yaml @@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module maintainers: - - Grygorii Strashko <grygorii.strashko@ti.com> - - Sekhar Nori <nsekhar@ti.com> + - Siddharth Vadapalli <s-vadapalli@ti.com> + - Ravi Gunasekaran <r-gunasekaran@ti.com> + - Roger Quadros <rogerq@kernel.org> description: |+ The TI AM654x/J721E CPTS module is used to facilitate host control of time diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml index 252207adbc..eabceb8495 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.yaml +++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml @@ -19,9 +19,6 @@ description: | Alternatively, it can specify the wireless part of the MT7628/MT7688 or MT7622/MT7986 SoC. -allOf: - - $ref: ieee80211.yaml# - properties: compatible: enum: @@ -38,7 +35,12 @@ properties: MT7986 should contain 3 regions consys, dcm, and sku, in this order. interrupts: - maxItems: 1 + minItems: 1 + items: + - description: major interrupt for rings + - description: additional interrupt for ring 19 + - description: additional interrupt for ring 4 + - description: additional interrupt for ring 5 power-domains: maxItems: 1 @@ -217,6 +219,24 @@ required: - compatible - reg +allOf: + - $ref: ieee80211.yaml# + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt7981-wmac + - mediatek,mt7986-wmac + then: + properties: + interrupts: + minItems: 4 + else: + properties: + interrupts: + maxItems: 1 + unevaluatedProperties: false examples: @@ -293,7 +313,10 @@ examples: reg = <0x18000000 0x1000000>, <0x10003000 0x1000>, <0x11d10000 0x1000>; - interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen 50>, <&topckgen 62>; clock-names = "mcu", "ap2conn"; diff --git a/dts/Bindings/net/wireless/qcom,ath10k.yaml b/dts/Bindings/net/wireless/qcom,ath10k.yaml index 7758a55dd3..9b3ef4bc37 100644 --- a/dts/Bindings/net/wireless/qcom,ath10k.yaml +++ b/dts/Bindings/net/wireless/qcom,ath10k.yaml @@ -8,6 +8,7 @@ title: Qualcomm Technologies ath10k wireless devices maintainers: - Kalle Valo <kvalo@kernel.org> + - Jeff Johnson <jjohnson@kernel.org> description: Qualcomm Technologies, Inc. IEEE 802.11ac devices. diff --git a/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml b/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml index 817f02a8b4..41d023797d 100644 --- a/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml +++ b/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml @@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices (PCIe) maintainers: - Kalle Valo <kvalo@kernel.org> + - Jeff Johnson <jjohnson@kernel.org> description: | Qualcomm Technologies IEEE 802.11ax PCIe devices diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml index 7d5f982a3d..672282cdfc 100644 --- a/dts/Bindings/net/wireless/qcom,ath11k.yaml +++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml @@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices maintainers: - Kalle Valo <kvalo@kernel.org> + - Jeff Johnson <jjohnson@kernel.org> description: | These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax diff --git a/dts/Bindings/nvmem/layouts/fixed-cell.yaml b/dts/Bindings/nvmem/layouts/fixed-cell.yaml index ac2381e660..8b3826243d 100644 --- a/dts/Bindings/nvmem/layouts/fixed-cell.yaml +++ b/dts/Bindings/nvmem/layouts/fixed-cell.yaml @@ -36,20 +36,18 @@ properties: allOf: - if: + properties: + compatible: + contains: + const: mac-base required: [ compatible ] then: - if: - properties: - compatible: - contains: - const: mac-base - then: - properties: - "#nvmem-cell-cells": - description: The first argument is a MAC address offset. - const: 1 - required: - - "#nvmem-cell-cells" + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + required: + - "#nvmem-cell-cells" required: - reg diff --git a/dts/Bindings/nvmem/nvmem-provider.yaml b/dts/Bindings/nvmem/nvmem-provider.yaml new file mode 100644 index 0000000000..4009a9a038 --- /dev/null +++ b/dts/Bindings/nvmem/nvmem-provider.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# + +title: NVMEM (Non Volatile Memory) Provider + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + '#nvmem-cell-cells': + enum: [0, 1] + +additionalProperties: true diff --git a/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt b/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt deleted file mode 100644 index 4881561b3a..0000000000 --- a/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt +++ /dev/null @@ -1,46 +0,0 @@ --------------------------------------------------------------------------- -= Zynq UltraScale+ MPSoC nvmem firmware driver binding = --------------------------------------------------------------------------- -The nvmem_firmware node provides access to the hardware related data -like soc revision, IDCODE... etc, By using the firmware interface. - -Required properties: -- compatible: should be "xlnx,zynqmp-nvmem-fw" - -= Data cells = -Are child nodes of silicon id, bindings of which as described in -bindings/nvmem/nvmem.txt - -------- - Example -------- -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - nvmem_firmware { - compatible = "xlnx,zynqmp-nvmem-fw"; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells */ - soc_revision: soc_revision { - reg = <0x0 0x4>; - }; - }; - }; -}; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - pcap { - ... - - nvmem-cells = <&soc_revision>; - nvmem-cell-names = "soc_revision"; - - ... - }; diff --git a/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml new file mode 100644 index 0000000000..917c40d5c3 --- /dev/null +++ b/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC Non Volatile Memory interface + +description: | + The ZynqMP MPSoC provides access to the hardware related data + like SOC revision, IDCODE and specific purpose efuses. + +maintainers: + - Kalyani Akula <kalyani.akula@amd.com> + - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + const: xlnx,zynqmp-nvmem-fw + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + nvmem { + compatible = "xlnx,zynqmp-nvmem-fw"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + }; + }; diff --git a/dts/Bindings/opp/opp-v2-base.yaml b/dts/Bindings/opp/opp-v2-base.yaml index e2f8f7af3c..b1bb87c865 100644 --- a/dts/Bindings/opp/opp-v2-base.yaml +++ b/dts/Bindings/opp/opp-v2-base.yaml @@ -57,8 +57,6 @@ patternProperties: specific binding. minItems: 1 maxItems: 32 - items: - maxItems: 1 opp-microvolt: description: | diff --git a/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml b/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml index d91b639ae7..a8b34f58f8 100644 --- a/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml @@ -150,22 +150,6 @@ allOf: - {} - const: pcie_phy - const: pcie_aux - - if: - properties: - compatible: - not: - contains: - enum: - - fsl,imx6sx-pcie - - fsl,imx8mq-pcie - - fsl,imx6sx-pcie-ep - - fsl,imx8mq-pcie-ep - then: - properties: - clocks: - maxItems: 3 - clock-names: - maxItems: 3 - if: properties: @@ -223,6 +207,7 @@ allOf: - fsl,imx6sx-pcie - fsl,imx6q-pcie - fsl,imx6qp-pcie + - fsl,imx95-pcie - fsl,imx6sx-pcie-ep - fsl,imx6q-pcie-ep - fsl,imx6qp-pcie-ep diff --git a/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml b/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml index ee155ed5f1..a06f75df84 100644 --- a/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -22,14 +22,7 @@ properties: - fsl,imx8mm-pcie-ep - fsl,imx8mq-pcie-ep - fsl,imx8mp-pcie-ep - - reg: - minItems: 2 - - reg-names: - items: - - const: dbi - - const: addr_space + - fsl,imx95-pcie-ep clocks: minItems: 3 @@ -66,7 +59,44 @@ allOf: properties: compatible: enum: + - fsl,imx8mm-pcie-ep + - fsl,imx8mq-pcie-ep + - fsl,imx8mp-pcie-ep + then: + properties: + reg: + minItems: 2 + maxItems: 2 + reg-names: + items: + - const: dbi + - const: addr_space + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie-ep + then: + properties: + reg: + minItems: 6 + maxItems: 6 + reg-names: + items: + - const: dbi + - const: atu + - const: dbi2 + - const: app + - const: dma + - const: addr_space + + - if: + properties: + compatible: + enum: - fsl,imx8mq-pcie-ep + - fsl,imx95-pcie-ep then: properties: clocks: diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.yaml b/dts/Bindings/pci/fsl,imx6q-pcie.yaml index 81bbb8728f..8b8d77b115 100644 --- a/dts/Bindings/pci/fsl,imx6q-pcie.yaml +++ b/dts/Bindings/pci/fsl,imx6q-pcie.yaml @@ -29,16 +29,7 @@ properties: - fsl,imx8mq-pcie - fsl,imx8mm-pcie - fsl,imx8mp-pcie - - reg: - items: - - description: Data Bus Interface (DBI) registers. - - description: PCIe configuration space region. - - reg-names: - items: - - const: dbi - - const: config + - fsl,imx95-pcie clocks: minItems: 3 @@ -94,6 +85,43 @@ allOf: properties: compatible: enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + reg: + maxItems: 2 + reg-names: + items: + - const: dbi + - const: config + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi + - const: config + - const: atu + - const: app + + - if: + properties: + compatible: + enum: - fsl,imx6sx-pcie then: properties: @@ -111,6 +139,7 @@ allOf: compatible: enum: - fsl,imx8mq-pcie + - fsl,imx95-pcie then: properties: clocks: diff --git a/dts/Bindings/pci/qcom,pcie-common.yaml b/dts/Bindings/pci/qcom,pcie-common.yaml new file mode 100644 index 0000000000..0d1b23523f --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-common.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI Express Root Complex Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + reg: + minItems: 4 + maxItems: 6 + + reg-names: + minItems: 4 + maxItems: 6 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + iommu-map: + minItems: 1 + maxItems: 16 + + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + dma-coherent: true + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + required-opps: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - reg + - reg-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +anyOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +additionalProperties: true diff --git a/dts/Bindings/pci/qcom,pcie-sa8775p.yaml b/dts/Bindings/pci/qcom,pcie-sa8775p.yaml new file mode 100644 index 0000000000..efde49d1be --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sa8775p.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8775p PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sa8775p + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 5 + maxItems: 5 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sa8775p"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sc7280.yaml b/dts/Bindings/pci/qcom,pcie-sc7280.yaml new file mode 100644 index 0000000000..634da24ec3 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sc7280.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc7280 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 13 + maxItems: 13 + + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: PCIe endpoint power supply + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <1>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&pp3300_ssd>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sc8180x.yaml b/dts/Bindings/pci/qcom,pcie-sc8180x.yaml new file mode 100644 index 0000000000..baf1813ec0 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sc8180x.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8180x PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc8180x + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8180x.h> + #include <dt-bindings/interconnect/qcom,sc8180x.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sc8280xp.yaml b/dts/Bindings/pci/qcom,pcie-sc8280xp.yaml new file mode 100644 index 0000000000..25c9f13ae9 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sc8280xp.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c20000 { + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <2>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + dma-coherent; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie2a_default>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&vreg_nvme>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sm8150.yaml b/dts/Bindings/pci/qcom,pcie-sm8150.yaml new file mode 100644 index 0000000000..9d569644fd --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sm8150.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8150 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ref # REFERENCE clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@1c00000 { + compatible = "qcom,pcie-sm8150"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ref"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sm8250.yaml b/dts/Bindings/pci/qcom,pcie-sm8250.yaml new file mode 100644 index 0000000000..4d060bce6f --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sm8250.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8250 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + # Unfortunately the "optional" ref clock is used in the middle of the list + oneOf: + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sm8350.yaml b/dts/Bindings/pci/qcom,pcie-sm8350.yaml new file mode 100644 index 0000000000..9eb6e457b0 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sm8350.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8350 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1", + "aggre0"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sm8450.yaml b/dts/Bindings/pci/qcom,pcie-sm8450.yaml new file mode 100644 index 0000000000..1496d6993a --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sm8450.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 11 + maxItems: 12 + + clock-names: + minItems: 11 + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + max-link-speed = <2>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-sm8550.yaml b/dts/Bindings/pci/qcom,pcie-sm8550.yaml new file mode 100644 index 0000000000..24cb386735 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-sm8550.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + oneOf: + - const: qcom,pcie-sm8550 + - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie-x1e80100.yaml b/dts/Bindings/pci/qcom,pcie-x1e80100.yaml new file mode 100644 index 0000000000..1074310a8e --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-x1e80100.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-x1e80100 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 7 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,x1e80100-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pci/qcom,pcie.yaml b/dts/Bindings/pci/qcom,pcie.yaml index a93ab3b540..cf9a6910b5 100644 --- a/dts/Bindings/pci/qcom,pcie.yaml +++ b/dts/Bindings/pci/qcom,pcie.yaml @@ -28,23 +28,8 @@ properties: - qcom,pcie-ipq8074-gen3 - qcom,pcie-msm8996 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdm845 - qcom,pcie-sdx55 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 - - items: - - enum: - - qcom,pcie-sm8650 - - const: qcom,pcie-sm8550 - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 @@ -106,9 +91,6 @@ properties: vdda_refclk-supply: description: A phandle to the core analog power supply for IC which generates reference clock - vddpe-3v3-supply: - description: A phandle to the PCIe endpoint power supply - phys: maxItems: 1 @@ -123,6 +105,9 @@ properties: description: GPIO controlled connection to PERST# signal maxItems: 1 + required-opps: + maxItems: 1 + wake-gpios: description: GPIO controlled connection to WAKE# signal maxItems: 1 @@ -143,7 +128,6 @@ anyOf: - "#interrupt-cells" - required: - msi-map - - msi-map-mask allOf: - $ref: /schemas/pci/pci-bus.yaml# @@ -217,16 +201,7 @@ allOf: compatible: contains: enum: - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdx55 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: properties: reg: @@ -456,65 +431,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc7280 - then: - properties: - clocks: - minItems: 13 - maxItems: 13 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sc8180x - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdm845 then: oneOf: @@ -558,229 +474,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sm8150 - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ref # REFERENCE clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8250 - then: - oneOf: - # Unfortunately the "optional" ref clock is used in the middle of the list - - properties: - clocks: - minItems: 9 - maxItems: 9 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - properties: - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8350 - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie0 - then: - properties: - clocks: - minItems: 12 - maxItems: 12 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie1 - then: - properties: - clocks: - minItems: 11 - maxItems: 11 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8550 - then: - properties: - clocks: - minItems: 7 - maxItems: 8 - clock-names: - minItems: 7 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr # Aggre NoC PCIe AXI clock - - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock - resets: - minItems: 1 - maxItems: 2 - reset-names: - minItems: 1 - items: - - const: pci # PCIe core reset - - const: link_down # PCIe link down reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sc8280xp - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr_4 # NoC aggregate 4 clock - - const: noc_aggr_south_sf # NoC aggregate South SF clock - - const: cnoc_qx # Configuration NoC QX clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdx55 then: properties: @@ -803,43 +496,6 @@ allOf: - const: pci # PCIe core reset - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8775p - then: - properties: - clocks: - minItems: 5 - maxItems: 5 - clock-names: - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc8280xp - then: - required: - - interconnects - - interconnect-names - - - if: not: properties: compatible: @@ -874,16 +530,7 @@ allOf: contains: enum: - qcom,pcie-msm8996 - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - qcom,pcie-sdm845 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: oneOf: - properties: @@ -911,24 +558,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc8280xp - then: - properties: - interrupts: - minItems: 4 - maxItems: 4 - interrupt-names: - items: - - const: msi0 - - const: msi1 - - const: msi2 - - const: msi3 - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-apq8064 - qcom,pcie-apq8084 - qcom,pcie-ipq4019 @@ -938,7 +567,6 @@ allOf: - qcom,pcie-ipq8074 - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p then: properties: interrupts: diff --git a/dts/Bindings/perf/arm,coresight-pmu.yaml b/dts/Bindings/perf/arm,coresight-pmu.yaml new file mode 100644 index 0000000000..985b62990f --- /dev/null +++ b/dts/Bindings/perf/arm,coresight-pmu.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Coresight Performance Monitoring Unit Architecture + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + const: arm,coresight-pmu + + reg: + items: + - description: Register page 0 + - description: Register page 1, if the PMU implements the dual-page extension + minItems: 1 + + interrupts: + items: + - description: Overflow interrupt + + cpus: + description: If the PMU is associated with a particular CPU or subset of CPUs, + array of phandles to the appropriate CPU node(s) + + reg-io-width: + description: Granularity at which PMU register accesses are single-copy atomic + default: 4 + enum: [4, 8] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/dts/Bindings/perf/starfive,jh8100-starlink-pmu.yaml b/dts/Bindings/perf/starfive,jh8100-starlink-pmu.yaml new file mode 100644 index 0000000000..915c6b8140 --- /dev/null +++ b/dts/Bindings/perf/starfive,jh8100-starlink-pmu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH8100 StarLink PMU + +maintainers: + - Ji Sheng Teoh <jisheng.teoh@starfivetech.com> + +description: + StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a + shared L3 memory system. The PMU support overflow interrupt, up to + 16 programmable 64bit event counters, and an independent 64bit cycle + counter. StarFive's JH8100 StarLink PMU is accessed via MMIO. + +properties: + compatible: + const: starfive,jh8100-starlink-pmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pmu@12900000 { + compatible = "starfive,jh8100-starlink-pmu"; + reg = <0x0 0x12900000 0x0 0x10000>; + interrupts = <34>; + }; + }; diff --git a/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml b/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml new file mode 100644 index 0000000000..2127a5732f --- /dev/null +++ b/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface MIPI CSI CD-PHY + +maintainers: + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 + receivers. The number of PHYs depends on the SoC model. + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only + capable. + +properties: + compatible: + enum: + - mediatek,mt8365-csi-rx + + reg: + maxItems: 1 + + num-lanes: + enum: [2, 3, 4] + + '#phy-cells': + enum: [0, 1] + description: | + If the PHY doesn't support mode selection then #phy-cells must be 0 and + PHY mode is described using phy-type property. + If the PHY supports mode selection, then #phy-cells must be 1 and mode + is set in the PHY cells. Supported modes are: + - PHY_TYPE_DPHY + - PHY_TYPE_CPHY + See include/dt-bindings/phy/phy.h for constants. + + phy-type: + description: + If the PHY doesn't support mode selection then this set the operating mode. + See include/dt-bindings/phy/phy.h for constants. + const: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - num-lanes + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + csi0_rx: phy@11c10000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c10000 0 0x2000>; + num-lanes = <2>; + #phy-cells = <1>; + }; + + csi1_rx: phy@11c12000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c12000 0 0x2000>; + phy-type = <PHY_TYPE_DPHY>; + num-lanes = <2>; + #phy-cells = <0>; + }; + }; +... diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml index dfb31314fa..15dc8efe6f 100644 --- a/dts/Bindings/phy/phy-cadence-torrent.yaml +++ b/dts/Bindings/phy/phy-cadence-torrent.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - cdns,torrent-phy + - ti,j7200-serdes-10g - ti,j721e-serdes-10g '#address-cells': @@ -35,14 +36,18 @@ properties: minItems: 1 maxItems: 2 description: - PHY reference clock for 1 item. Must contain an entry in clock-names. - Optional Parent to enable output reference clock. + PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1). + pll1_refclk is optional and used for multi-protocol configurations requiring + separate reference clock for each protocol. + Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used. + Optional parent clock (phy_en_refclk) to enable a reference clock output feature + on some platforms to output either derived or received reference clock. clock-names: minItems: 1 items: - const: refclk - - const: phy_en_refclk + - enum: [ pll1_refclk, phy_en_refclk ] reg: minItems: 1 diff --git a/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml new file mode 100644 index 0000000000..f1f4e4f833 --- /dev/null +++ b/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (USB, MSM8998) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for USB-C on + several Qualcomm chipsets. + +properties: + compatible: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + maxItems: 4 + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: phy_phy + + vdda-phy-supply: true + + vdda-pll-supply: true + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + qcom,tcsr-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to TCSR hardware block + - description: offset of the VLS CLAMP register + description: Clamp register present in the TCSR + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + - "#clock-cells" + - clock-output-names + - "#phy-cells" + - qcom,tcsr-reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: cfg_ahb + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_ahb + - const: ref + - const: com_aux + - const: pipe + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&pmic_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; + }; diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 6c03f2d5fc..ba966a78a1 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -38,6 +38,8 @@ properties: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen3x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy reg: minItems: 1 @@ -151,6 +153,8 @@ allOf: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen3x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy then: properties: clocks: @@ -194,6 +198,8 @@ allOf: enum: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy then: properties: resets: diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index 8474eef8d0..91a6cc38ff 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -19,6 +19,7 @@ properties: - qcom,msm8996-qmp-ufs-phy - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy + - qcom,sc7180-qmp-ufs-phy - qcom,sc7280-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy @@ -38,15 +39,12 @@ properties: maxItems: 1 clocks: - minItems: 1 + minItems: 2 maxItems: 3 clock-names: - minItems: 1 - items: - - const: ref - - const: ref_aux - - const: qref + minItems: 2 + maxItems: 3 power-domains: maxItems: 1 @@ -86,22 +84,9 @@ allOf: compatible: contains: enum: + - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy - qcom,sc7280-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - then: - properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy - qcom,sdm845-qmp-ufs-phy @@ -112,14 +97,19 @@ allOf: - qcom,sm8150-qmp-ufs-phy - qcom,sm8250-qmp-ufs-phy - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy - qcom,sm8650-qmp-ufs-phy then: properties: clocks: - maxItems: 2 + minItems: 3 + maxItems: 3 clock-names: - maxItems: 2 + items: + - const: ref + - const: ref_aux + - const: qref - if: properties: @@ -130,22 +120,28 @@ allOf: then: properties: clocks: - maxItems: 1 + minItems: 2 + maxItems: 2 clock-names: - maxItems: 1 + items: + - const: ref + - const: qref additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,rpmh.h> ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0x01d87000 0x1000>; - clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>; + + clock-names = "ref", "ref_aux", "qref"; power-domains = <&gcc UFS_PHY_GDSC>; diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 15d82c67f1..1e2d4ddc53 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,15 +20,12 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - qcom,sdx75-qmp-usb3-uni-phy - - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy - qcom,sm8350-qmp-usb3-uni-phy @@ -93,7 +90,6 @@ allOf: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - qcom,sdx75-qmp-usb3-uni-phy @@ -113,24 +109,6 @@ allOf: compatible: contains: enum: - - qcom,qcm2290-qmp-usb3-phy - - qcom,sm6115-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: cfg_ahb - - const: ref - - const: com_aux - - const: pipe - - - if: - properties: - compatible: - contains: - enum: - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sm8150-qmp-usb3-uni-phy diff --git a/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml b/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml new file mode 100644 index 0000000000..54e822c715 --- /dev/null +++ b/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC HDMI/eDP Transmitter Combo PHY + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@collabora.com> + +properties: + compatible: + enum: + - rockchip,rk3588-hdptx-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock + - description: APB clock + + clock-names: + items: + - const: ref + - const: apb + + "#phy-cells": + const: 0 + + resets: + items: + - description: PHY reset line + - description: APB reset line + - description: INIT reset line + - description: CMN reset line + - description: LANE reset line + - description: ROPLL reset line + - description: LCPLL reset line + + reset-names: + items: + - const: phy + - const: apb + - const: init + - const: cmn + - const: lane + - const: ropll + - const: lcpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Some PHY related data is accessed through GRF regs. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + - resets + - reset-names + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/reset/rockchip,rk3588-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@fed60000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed60000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, + <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, + <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, + <&cru SRST_HDPTX0_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll"; + rockchip,grf = <&hdptxphy_grf>; + }; + }; diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index c7df4cd341..d9e0b2c48e 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -24,7 +24,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 0942ea60c6..108719bde0 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -21,7 +21,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index e3c8bde305..dc277f2e2e 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -21,7 +21,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index c1b03147e8..add83c6763 100644 --- a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -29,7 +29,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index 4ec85b8248..412bbcc276 100644 --- a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -29,7 +29,7 @@ required: - compatible patternProperties: - "^bank@[0-9a-z]+$": + "^bank@[0-9a-f]+$": $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio unevaluatedProperties: false diff --git a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt index e8abbdad7b..0aa1a53012 100644 --- a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt @@ -20,6 +20,7 @@ such as pull-up, multi drive, etc. Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" + or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -120,6 +121,7 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: For each bank the required properties are: - compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or "microchip,sam9x60-gpio" + or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio" - reg: physical base address and length of the controller's registers - interrupts: interrupt outputs from the controller - interrupt-controller: marks the device node as an interrupt controller diff --git a/dts/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/dts/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml new file mode 100644 index 0000000000..98c310a3c6 --- /dev/null +++ b/dts/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW9523/AW9523B I2C GPIO Expander + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function + I/O, 256 steps PWM mode and interrupt support. + +properties: + compatible: + const: awinic,aw9523-pinctrl + + reg: + maxItems: 1 + + '#gpio-cells': + description: | + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: Specifies the INTN pin IRQ. + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + reset-gpios: + maxItems: 1 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. + items: + pattern: "^gpio([0-9]|1[0-5])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the + specified pins. + + enum: [ gpio, pwm ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-open-drain: true + drive-push-pull: true + input-enable: true + input-disable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + # Example configuration to drive pins for a keyboard matrix + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + aw9523: gpio-expander@58 { + compatible = "awinic,aw9523-pinctrl"; + reg = <0x58>; + interrupt-parent = <&tlmm>; + interrupts = <50 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 16>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + + keyboard-matrix-col-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + input-disable; + output-low; + }; + + keyboard-matrix-row-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + bias-pull-up; + drive-open-drain; + input-enable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/cirrus,madera.yaml b/dts/Bindings/pinctrl/cirrus,madera.yaml index bb61a30321..482acda88e 100644 --- a/dts/Bindings/pinctrl/cirrus,madera.yaml +++ b/dts/Bindings/pinctrl/cirrus,madera.yaml @@ -93,7 +93,8 @@ properties: input-schmitt-disable: true - input-debounce: true + input-debounce: + maxItems: 1 output-low: true diff --git a/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml index 7f30ec2f1e..700ac86c26 100644 --- a/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml @@ -45,7 +45,8 @@ properties: maxItems: 1 gpio-reserved-ranges: - maxItems: 1 + minItems: 1 + maxItems: 60 vdd-supply: description: @@ -85,6 +86,8 @@ patternProperties: bias-disable: true + input-enable: true + output-high: true output-low: true @@ -133,6 +136,23 @@ examples: interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; vdd-supply = <&p3v3>; - gpio-reserved-ranges = <5 1>; + gpio-reserved-ranges = <1 2>, <6 1>, <10 1>, <15 1>; + + pinctrl-0 = <&U62160_pins>, <&U62160_ipins>; + pinctrl-names = "default"; + + U62160_pins: cfg-pins { + pins = "gp03", "gp16", "gp20", "gp50", "gp51"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + U62160_ipins: icfg-pins { + pins = "gp04", "gp17", "gp21", "gp52", "gp53"; + function = "gpio"; + input-enable; + bias-pull-up; + }; }; }; diff --git a/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt deleted file mode 100644 index 7ca4f6118d..0000000000 --- a/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Freescale i.MX6 UltraLite IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or - "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite - Reference Manual for detailed CONFIG settings. - -CONFIG bits definition: -PAD_CTL_HYS (1 << 16) -PAD_CTL_PUS_100K_DOWN (0 << 14) -PAD_CTL_PUS_47K_UP (1 << 14) -PAD_CTL_PUS_100K_UP (2 << 14) -PAD_CTL_PUS_22K_UP (3 << 14) -PAD_CTL_PUE (1 << 13) -PAD_CTL_PKE (1 << 12) -PAD_CTL_ODE (1 << 11) -PAD_CTL_SPEED_LOW (0 << 6) -PAD_CTL_SPEED_MED (1 << 6) -PAD_CTL_SPEED_HIGH (3 << 6) -PAD_CTL_DSE_DISABLE (0 << 3) -PAD_CTL_DSE_260ohm (1 << 3) -PAD_CTL_DSE_130ohm (2 << 3) -PAD_CTL_DSE_87ohm (3 << 3) -PAD_CTL_DSE_65ohm (4 << 3) -PAD_CTL_DSE_52ohm (5 << 3) -PAD_CTL_DSE_43ohm (6 << 3) -PAD_CTL_DSE_37ohm (7 << 3) -PAD_CTL_SRE_FAST (1 << 0) -PAD_CTL_SRE_SLOW (0 << 0) diff --git a/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml new file mode 100644 index 0000000000..906b264a9e --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX6UL IOMUX Controller + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx6ul-iomuxc + - fsl,imx6ull-iomuxc-snvs + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX6UL Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied: + PAD_CTL_HYS (1 << 16) + PAD_CTL_PUS_100K_DOWN (0 << 14) + PAD_CTL_PUS_47K_UP (1 << 14) + PAD_CTL_PUS_100K_UP (2 << 14) + PAD_CTL_PUS_22K_UP (3 << 14) + PAD_CTL_PUE (1 << 13) + PAD_CTL_PKE (1 << 12) + PAD_CTL_ODE (1 << 11) + PAD_CTL_SPEED_LOW (0 << 6) + PAD_CTL_SPEED_MED (1 << 6) + PAD_CTL_SPEED_HIGH (3 << 6) + PAD_CTL_DSE_DISABLE (0 << 3) + PAD_CTL_DSE_260ohm (1 << 3) + PAD_CTL_DSE_130ohm (2 << 3) + PAD_CTL_DSE_87ohm (3 << 3) + PAD_CTL_DSE_65ohm (4 << 3) + PAD_CTL_DSE_52ohm (5 << 3) + PAD_CTL_DSE_43ohm (6 << 3) + PAD_CTL_DSE_37ohm (7 << 3) + PAD_CTL_SRE_FAST (1 << 0) + PAD_CTL_SRE_SLOW (0 << 0) + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + + mux_uart: uartgrp { + fsl,pins = < + 0x0084 0x0310 0x0000 0 0 0x1b0b1 + 0x0088 0x0314 0x0624 0 3 0x1b0b1 + >; + }; + }; + - | + iomuxc_snvs: pinctrl@2290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x4000>; + + pinctrl_snvs_usbc_det: snvsusbcdetgrp { + fsl,pins = < + 0x0010 0x0054 0x0000 0x5 0x0 0x130b0 + >; + }; + }; diff --git a/dts/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/dts/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml new file mode 100644 index 0000000000..5f00604bf4 --- /dev/null +++ b/dts/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 pin controller + +description: > + The EyeQ5 pin controller handles the two pin banks of the system. It belongs + to a system-controller block called OLB. + + Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin + muxing supports two functions for each pin: first is GPIO, second is + pin-dependent. + + Pins and groups are bijective. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +$ref: pinctrl.yaml# + +properties: + compatible: + enum: + - mobileye,eyeq5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + "-pins?$": + type: object + description: Pin muxing configuration. + $ref: pinmux-node.yaml# + additionalProperties: false + properties: + pins: true + function: + enum: [gpio, + # Bank A + timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0, + spi1, refclk0, + # Bank B + timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0] + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + required: + - pins + - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + pins: + items: # PA0 - PA28, PB0 - PB22 + pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$' + - if: + properties: + function: + const: timer0 + then: + properties: + pins: + items: + enum: [PA0, PA1] + - if: + properties: + function: + const: timer1 + then: + properties: + pins: + items: + enum: [PA2, PA3] + - if: + properties: + function: + const: timer2 + then: + properties: + pins: + items: + enum: [PA4, PA5] + - if: + properties: + function: + const: timer5 + then: + properties: + pins: + items: + enum: [PA6, PA7, PA8, PA9] + - if: + properties: + function: + const: uart0 + then: + properties: + pins: + items: + enum: [PA10, PA11] + - if: + properties: + function: + const: uart1 + then: + properties: + pins: + items: + enum: [PA12, PA13] + - if: + properties: + function: + const: can0 + then: + properties: + pins: + items: + enum: [PA14, PA15] + - if: + properties: + function: + const: can1 + then: + properties: + pins: + items: + enum: [PA16, PA17] + - if: + properties: + function: + const: spi0 + then: + properties: + pins: + items: + enum: [PA18, PA19, PA20, PA21, PA22] + - if: + properties: + function: + const: spi1 + then: + properties: + pins: + items: + enum: [PA23, PA24, PA25, PA26, PA27] + - if: + properties: + function: + const: refclk0 + then: + properties: + pins: + items: + enum: [PA28] + - if: + properties: + function: + const: timer3 + then: + properties: + pins: + items: + enum: [PB0, PB1] + - if: + properties: + function: + const: timer4 + then: + properties: + pins: + items: + enum: [PB2, PB3] + - if: + properties: + function: + const: timer6 + then: + properties: + pins: + items: + enum: [PB4, PB5, PB6, PB7] + - if: + properties: + function: + const: uart2 + then: + properties: + pins: + items: + enum: [PB8, PB9] + - if: + properties: + function: + const: can2 + then: + properties: + pins: + items: + enum: [PB10, PB11] + - if: + properties: + function: + const: spi2 + then: + properties: + pins: + items: + enum: [PB12, PB13, PB14, PB15, PB16] + - if: + properties: + function: + const: spi3 + then: + properties: + pins: + items: + enum: [PB17, PB18, PB19, PB20, PB21] + - if: + properties: + function: + const: mclk0 + then: + properties: + pins: + items: + enum: [PB22] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml index 3e84728988..b55d9c3166 100644 --- a/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml +++ b/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -152,7 +152,6 @@ patternProperties: description: Debouncing periods in microseconds, one period per interrupt bank found in the controller - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 4 @@ -160,7 +159,6 @@ patternProperties: description: | 0: Low rate 1: High rate - $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] drive-strength: diff --git a/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml index 7b7f840ffc..08442c880f 100644 --- a/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml +++ b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml @@ -103,7 +103,8 @@ patternProperties: items: pattern: "^gpio1?[0-9]{1,2}$" - input-debounce: true + input-debounce: + maxItems: 1 additionalProperties: false diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml index f3deda9f71..db8224dfba 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml @@ -10,18 +10,21 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -$ref: nvidia,tegra234-pinmux-common.yaml - properties: compatible: const: nvidia,tegra234-pinmux-aon + reg: + maxItems: 1 + patternProperties: "^pinmux(-[a-z0-9-]+)?$": type: object # pin groups additionalProperties: + $ref: nvidia,tegra234-pinmux-common.yaml + properties: nvidia,pins: items: diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml index 4f9de78085..8cf9e4c915 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml @@ -10,57 +10,43 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -properties: - reg: - items: - - description: pinmux registers - -patternProperties: - "^pinmux(-[a-z0-9-]+)?$": - type: object - - # pin groups - additionalProperties: - $ref: nvidia,tegra-pinmux-common.yaml - # We would typically use unevaluatedProperties here but that has the - # downside that all the properties in the common bindings become valid - # for all chip generations. In this case, however, we want the per-SoC - # bindings to be able to override which of the common properties are - # allowed, since not all pinmux generations support the same sets of - # properties. This way, the common bindings define the format of the - # properties but the per-SoC bindings define which of them apply to a - # given chip. - additionalProperties: false - properties: - nvidia,function: - enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, - eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, - pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, - sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, - usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, - i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, - dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, - ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, - displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, - tsc_alt, istctrl, vi1_alt, dspk1, igpu ] +$ref: nvidia,tegra-pinmux-common.yaml - # out of the common properties, only these are allowed for Tegra234 - nvidia,pins: true - nvidia,pull: true - nvidia,tristate: true - nvidia,schmitt: true - nvidia,enable-input: true - nvidia,open-drain: true - nvidia,lock: true - nvidia,drive-type: true - nvidia,io-hv: true - - required: - - nvidia,pins +properties: + nvidia,function: + enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, + eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, + pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, + sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, + usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, + i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, + dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, + ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, + displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, + tsc_alt, istctrl, vi1_alt, dspk1, igpu ] + + # out of the common properties, only these are allowed for Tegra234 + nvidia,pins: true + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true required: - - compatible - - reg + - nvidia,pins + +# We would typically use unevaluatedProperties here but that has the +# downside that all the properties in the common bindings become valid +# for all chip generations. In this case, however, we want the per-SoC +# bindings to be able to override which of the common properties are +# allowed, since not all pinmux generations support the same sets of +# properties. This way, the common bindings define the format of the +# properties but the per-SoC bindings define which of them apply to a +# given chip. +additionalProperties: false -additionalProperties: true ... diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml index 17b865ecfc..f5a3a881de 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml @@ -10,18 +10,21 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> - Jon Hunter <jonathanh@nvidia.com> -$ref: nvidia,tegra234-pinmux-common.yaml - properties: compatible: const: nvidia,tegra234-pinmux + reg: + maxItems: 1 + patternProperties: "^pinmux(-[a-z0-9-]+)?$": type: object # pin groups additionalProperties: + $ref: nvidia,tegra234-pinmux-common.yaml + properties: nvidia,pins: items: diff --git a/dts/Bindings/pinctrl/pincfg-node.yaml b/dts/Bindings/pinctrl/pincfg-node.yaml index be81ed22a0..d0af21a564 100644 --- a/dts/Bindings/pinctrl/pincfg-node.yaml +++ b/dts/Bindings/pinctrl/pincfg-node.yaml @@ -97,7 +97,7 @@ properties: description: disable schmitt-trigger mode input-debounce: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array description: Takes the debounce time in usec as argument or 0 to disable debouncing diff --git a/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml index bb08ca5a15..bb675c8ec2 100644 --- a/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml +++ b/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -17,7 +17,7 @@ allOf: properties: compatible: - const: qcom,sm4450-pinctrl + const: qcom,sm4450-tlmm reg: maxItems: 1 diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml index 181cd1676c..5d84364d13 100644 --- a/dts/Bindings/pinctrl/renesas,pfc.yaml +++ b/dts/Bindings/pinctrl/renesas,pfc.yaml @@ -46,6 +46,7 @@ properties: - renesas,pfc-r8a779a0 # R-Car V3U - renesas,pfc-r8a779f0 # R-Car S4-8 - renesas,pfc-r8a779g0 # R-Car V4H + - renesas,pfc-r8a779h0 # R-Car V4M - renesas,pfc-sh73a0 # SH-Mobile AG5 reg: diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index d476de82e5..4d5a957fa2 100644 --- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -120,7 +120,9 @@ additionalProperties: slew-rate: true gpio-hog: true gpios: true + input: true input-enable: true + output-enable: true output-high: true output-low: true line-name: true diff --git a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml index d2676f92ef..de6c10ba36 100644 --- a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/dts/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Pinctrl @@ -28,7 +28,7 @@ description: | properties: compatible: - const: xlnx,zynq-pinctrl + const: xlnx,pinctrl-zynq reg: description: Specifies the base address and size of the SLCR space. @@ -181,7 +181,7 @@ examples: - | #include <dt-bindings/pinctrl/pinctrl-zynq.h> pinctrl0: pinctrl@700 { - compatible = "xlnx,zynq-pinctrl"; + compatible = "xlnx,pinctrl-zynq"; reg = <0x700 0x200>; syscon = <&slcr>; diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml index 2ff246cf8b..929b7ef9c1 100644 --- a/dts/Bindings/power/qcom,rpmpd.yaml +++ b/dts/Bindings/power/qcom,rpmpd.yaml @@ -24,6 +24,8 @@ properties: - qcom,msm8917-rpmpd - qcom,msm8939-rpmpd - qcom,msm8953-rpmpd + - qcom,msm8974-rpmpd + - qcom,msm8974pro-pma8084-rpmpd - qcom,msm8976-rpmpd - qcom,msm8994-rpmpd - qcom,msm8996-rpmpd diff --git a/dts/Bindings/power/renesas,rcar-sysc.yaml b/dts/Bindings/power/renesas,rcar-sysc.yaml index 0720b54881..e76fb27349 100644 --- a/dts/Bindings/power/renesas,rcar-sysc.yaml +++ b/dts/Bindings/power/renesas,rcar-sysc.yaml @@ -45,6 +45,7 @@ properties: - renesas,r8a779a0-sysc # R-Car V3U - renesas,r8a779f0-sysc # R-Car S4-8 - renesas,r8a779g0-sysc # R-Car V4H + - renesas,r8a779h0-sysc # R-Car V4M reg: maxItems: 1 diff --git a/dts/Bindings/power/wakeup-source.txt b/dts/Bindings/power/wakeup-source.txt index 75bc20b956..a6c8978964 100644 --- a/dts/Bindings/power/wakeup-source.txt +++ b/dts/Bindings/power/wakeup-source.txt @@ -27,7 +27,7 @@ List of legacy properties and respective binding document Documentation/devicetree/bindings/mfd/tc3589x.txt Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt -5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt +5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml 6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt Examples diff --git a/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml b/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml new file mode 100644 index 0000000000..0e92868a2b --- /dev/null +++ b/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCDC's PWM controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block + generates the LCD contrast control signal (LCD_PWM) that controls the + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be + converted to an analog voltage with a simple passive filter. LCD display + panels have different backlight specifications in terms of minimum/maximum + values for PWM frequency. If the LCDC PWM frequency range does not match the + LCD display panel, it is possible to use the standalone PWM Controller to + drive the backlight. + +properties: + compatible: + const: atmel,hlcdc-pwm + + "#pwm-cells": + const: 3 + +required: + - compatible + - "#pwm-cells" + +additionalProperties: false diff --git a/dts/Bindings/pwm/atmel-hlcdc-pwm.txt b/dts/Bindings/pwm/atmel-hlcdc-pwm.txt deleted file mode 100644 index afa501bf7f..0000000000 --- a/dts/Bindings/pwm/atmel-hlcdc-pwm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver - -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. -See ../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be one of the following: - "atmel,hlcdc-pwm" - - pinctr-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the pinctrl states described by pinctrl - default. - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells - bindings defined in pwm.yaml in this directory. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/dts/Bindings/pwm/marvell,pxa-pwm.yaml b/dts/Bindings/pwm/marvell,pxa-pwm.yaml new file mode 100644 index 0000000000..ba6325575e --- /dev/null +++ b/dts/Bindings/pwm/marvell,pxa-pwm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA PWM + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - marvell,pxa250-pwm + - marvell,pxa270-pwm + - marvell,pxa168-pwm + - marvell,pxa910-pwm + + reg: + # Length should be 0x10 + maxItems: 1 + + "#pwm-cells": + # Used for specifying the period length in nanoseconds + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/pxa-clock.h> + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + }; diff --git a/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml b/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml index 0fbe8a6469..a5c3088016 100644 --- a/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt7629-pwm - mediatek,mt7981-pwm - mediatek,mt7986-pwm + - mediatek,mt7988-pwm - mediatek,mt8183-pwm - mediatek,mt8365-pwm - mediatek,mt8516-pwm diff --git a/dts/Bindings/pwm/mediatek,pwm-disp.yaml b/dts/Bindings/pwm/mediatek,pwm-disp.yaml index afcdeed4e8..bc813fe74f 100644 --- a/dts/Bindings/pwm/mediatek,pwm-disp.yaml +++ b/dts/Bindings/pwm/mediatek,pwm-disp.yaml @@ -52,6 +52,9 @@ properties: - const: main - const: mm + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/pwm/opencores,pwm.yaml b/dts/Bindings/pwm/opencores,pwm.yaml new file mode 100644 index 0000000000..52a59d245c --- /dev/null +++ b/dts/Bindings/pwm/opencores,pwm.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores PWM controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The OpenCores PTC ip core contains a PWM controller. When operating in PWM + mode, the PTC core generates binary signal with user-programmable low and + high periods. All PTC counters and registers are 32-bit. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - starfive,jh7100-pwm + - starfive,jh7110-pwm + - starfive,jh8100-pwm + - const: opencores,pwm-v1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@12490000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x12490000 0x10000>; + clocks = <&clkgen 181>; + resets = <&rstgen 109>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/pwm/pwm-amlogic.yaml b/dts/Bindings/pwm/pwm-amlogic.yaml index 527864a4d8..1d71d4f8f3 100644 --- a/dts/Bindings/pwm/pwm-amlogic.yaml +++ b/dts/Bindings/pwm/pwm-amlogic.yaml @@ -9,9 +9,6 @@ title: Amlogic PWM maintainers: - Heiner Kallweit <hkallweit1@gmail.com> -allOf: - - $ref: pwm.yaml# - properties: compatible: oneOf: @@ -24,31 +21,40 @@ properties: - amlogic,meson-g12a-ee-pwm - amlogic,meson-g12a-ao-pwm-ab - amlogic,meson-g12a-ao-pwm-cd - - amlogic,meson-s4-pwm + deprecated: true - items: - const: amlogic,meson-gx-pwm - const: amlogic,meson-gxbb-pwm + deprecated: true - items: - const: amlogic,meson-gx-ao-pwm - const: amlogic,meson-gxbb-ao-pwm + deprecated: true - items: - const: amlogic,meson8-pwm - const: amlogic,meson8b-pwm + deprecated: true + - enum: + - amlogic,meson8-pwm-v2 + - amlogic,meson-s4-pwm + - items: + - enum: + - amlogic,meson8b-pwm-v2 + - amlogic,meson-gxbb-pwm-v2 + - amlogic,meson-axg-pwm-v2 + - amlogic,meson-g12-pwm-v2 + - const: amlogic,meson8-pwm-v2 reg: maxItems: 1 clocks: minItems: 1 - maxItems: 2 + maxItems: 4 clock-names: - oneOf: - - items: - - enum: [clkin0, clkin1] - - items: - - const: clkin0 - - const: clkin1 + minItems: 1 + maxItems: 2 "#pwm-cells": const: 3 @@ -57,6 +63,79 @@ required: - compatible - reg +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm + - amlogic,meson8b-pwm + - amlogic,meson-gxbb-pwm + - amlogic,meson-gxbb-ao-pwm + - amlogic,meson-axg-ee-pwm + - amlogic,meson-axg-ao-pwm + - amlogic,meson-g12a-ee-pwm + - amlogic,meson-g12a-ao-pwm-ab + - amlogic,meson-g12a-ao-pwm-cd + then: + # Obsolete historic bindings tied to the driver implementation + # The clocks provided here are meant to be matched with the input + # known (hard-coded) in the driver and used to select pwm clock + # source. Currently, the linux driver ignores this. + # This is kept to maintain ABI backward compatibility. + properties: + clocks: + maxItems: 2 + clock-names: + oneOf: + - items: + - enum: [clkin0, clkin1] + - items: + - const: clkin0 + - const: clkin1 + + # Newer binding where clock describe the actual clock inputs of the pwm + # block. These are necessary but some inputs may be grounded. + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm-v2 + then: + properties: + clocks: + minItems: 1 + items: + - description: input clock 0 of the pwm block + - description: input clock 1 of the pwm block + - description: input clock 2 of the pwm block + - description: input clock 3 of the pwm block + clock-names: false + required: + - clocks + + # Newer IP block take a single input per channel, instead of 4 inputs + # for both channels + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-s4-pwm + then: + properties: + clocks: + items: + - description: input clock of PWM channel A + - description: input clock of PWM channel B + clock-names: false + required: + - clocks + additionalProperties: false examples: @@ -68,3 +147,17 @@ examples: clock-names = "clkin0", "clkin1"; #pwm-cells = <3>; }; + - | + pwm@2000 { + compatible = "amlogic,meson8-pwm-v2"; + reg = <0x1000 0x10>; + clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>; + #pwm-cells = <3>; + }; + - | + pwm@1000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x1000 0x10>; + clocks = <&pwm_src_a>, <&pwm_src_b>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/pwm/pxa-pwm.txt b/dts/Bindings/pwm/pxa-pwm.txt deleted file mode 100644 index 5ae9f1e3c3..0000000000 --- a/dts/Bindings/pwm/pxa-pwm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Marvell PWM controller - -Required properties: -- compatible: should be one or more of: - - "marvell,pxa250-pwm" - - "marvell,pxa270-pwm" - - "marvell,pxa168-pwm" - - "marvell,pxa910-pwm" -- reg: Physical base address and length of the registers used by the PWM channel - Note that one device instance must be created for each PWM that is used, so the - length covers only the register window for one PWM output, not that of the - entire PWM controller. Currently length is 0x10 for all supported devices. -- #pwm-cells: Should be 1. This cell is used to specify the period in - nanoseconds. - -Example PWM device node: - -pwm0: pwm@40b00000 { - compatible = "marvell,pxa250-pwm"; - reg = <0x40b00000 0x10>; - #pwm-cells = <1>; -}; - -Example PWM client node: - -backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 5000000>; - ... -} diff --git a/dts/Bindings/regulator/gpio-regulator.yaml b/dts/Bindings/regulator/gpio-regulator.yaml index f4c1f36e52..a34e857546 100644 --- a/dts/Bindings/regulator/gpio-regulator.yaml +++ b/dts/Bindings/regulator/gpio-regulator.yaml @@ -47,6 +47,7 @@ properties: 1: HIGH Default is LOW if nothing else is specified. $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 maxItems: 8 items: enum: [0, 1] @@ -57,7 +58,8 @@ properties: regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. $ref: /schemas/types.yaml#/definitions/uint32-matrix - maxItems: 8 + minItems: 2 + maxItems: 256 items: items: - description: Voltage in microvolts diff --git a/dts/Bindings/regulator/infineon,ir38060.yaml b/dts/Bindings/regulator/infineon,ir38060.yaml new file mode 100644 index 0000000000..e6ffbc2a22 --- /dev/null +++ b/dts/Bindings/regulator/infineon,ir38060.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon Buck Regulators with PMBUS interfaces + +maintainers: + - Not Me. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - infineon,ir38060 + - infineon,ir38064 + - infineon,ir38164 + - infineon,ir38263 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@34 { + compatible = "infineon,ir38060"; + reg = <0x34>; + + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + }; + }; diff --git a/dts/Bindings/regulator/mcp16502-regulator.txt b/dts/Bindings/regulator/mcp16502-regulator.txt deleted file mode 100644 index 451cc4e86b..0000000000 --- a/dts/Bindings/regulator/mcp16502-regulator.txt +++ /dev/null @@ -1,144 +0,0 @@ -MCP16502 PMIC - -Required properties: -- compatible: "microchip,mcp16502" -- reg: I2C slave address -- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode; this - property is optional; -- regulators: A node that houses a sub-node for each regulator within - the device. Each sub-node is identified using the node's - name. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - -Regulators of MCP16502 PMIC: -1) VDD_IO - Buck (1.2 - 3.7 V) -2) VDD_DDR - Buck (0.6 - 1.85 V) -3) VDD_CORE - Buck (0.6 - 1.85 V) -4) VDD_OTHER - BUCK (0.6 - 1.85 V) -5) LDO1 - LDO (1.2 - 3.7 V) -6) LDO2 - LDO (1.2 - 3.7 V) - -Regulator modes: -2 - FPWM: higher precision, higher consumption -4 - AutoPFM: lower precision, lower consumption - -Each regulator is defined using the standard binding for regulators. - -Example: - -mcp16502@5b { - compatible = "microchip,mcp16502"; - reg = <0x5b>; - status = "okay"; - lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; - - regulators { - VDD_IO { - regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_DDR { - regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_CORE { - regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - VDD_OTHER { - regulator-name = "VDD_OTHER"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; - regulator-initial-mode = <2>; - regulator-allowed-modes = <2>, <4>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-mode = <4>; - }; - }; - - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - - regulator-state-standby { - regulator-on-in-suspend; - }; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - }; -}; diff --git a/dts/Bindings/regulator/microchip,mcp16502.yaml b/dts/Bindings/regulator/microchip,mcp16502.yaml new file mode 100644 index 0000000000..1aca364678 --- /dev/null +++ b/dts/Bindings/regulator/microchip,mcp16502.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MCP16502 - High-Performance PMIC + +maintainers: + - Andrei Simion <andrei.simion@microchip.com> + +description: + The MCP16502 is an optimally integrated PMIC compatible + with Microchip's eMPUs(Embedded Microprocessor Units), + requiring Dynamic Voltage Scaling (DVS) with the use + of High-Performance mode (HPM). + +properties: + compatible: + const: microchip,mcp16502 + + lpm-gpios: + maxItems: 1 + description: GPIO for LPM pin. + Note that this GPIO must remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. + + reg: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: List of regulators and its properties. + + patternProperties: + "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: + enum: [2, 4] + default: 2 + description: Initial operating mode + + regulator-allowed-modes: + items: + enum: [2, 4] + description: Supported modes + 2 - FPWM higher precision, higher consumption + 4 - AutoPFM lower precision, lower consumption + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml index 534f87e987..33ae1f7868 100644 --- a/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -19,8 +19,15 @@ allOf: properties: compatible: - enum: - - qcom,pm8150b-vbus-reg + oneOf: + - enum: + - qcom,pm8150b-vbus-reg + - items: + - enum: + - qcom,pm4125-vbus-reg + - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg + - const: qcom,pm8150b-vbus-reg reg: maxItems: 1 diff --git a/dts/Bindings/regulator/ti,tps65132.yaml b/dts/Bindings/regulator/ti,tps65132.yaml new file mode 100644 index 0000000000..6a6d1a3d6f --- /dev/null +++ b/dts/Bindings/regulator/ti,tps65132.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS65132 Dual Output Power Regulators + +maintainers: + - devicetree@vger.kernel.org + +description: | + The TPS65132 is designed to supply positive/negative driven applications. + + Datasheet is available at: + https://www.ti.com/lit/gpn/tps65132 + +properties: + compatible: + enum: + - ti,tps65132 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + active-discharge-gpios: + maxItems: 1 + description: + GPIO specifier to actively discharge the delay mechanism. + + ti,active-discharge-time-us: + description: Regulator active discharge time in microseconds. + + dependencies: + active-discharge-gpios: [ 'ti,active-discharge-time-us' ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + regulator-active-discharge = <0>; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; + }; + }; + }; diff --git a/dts/Bindings/regulator/tps65132-regulator.txt b/dts/Bindings/regulator/tps65132-regulator.txt deleted file mode 100644 index 3a3505520c..0000000000 --- a/dts/Bindings/regulator/tps65132-regulator.txt +++ /dev/null @@ -1,46 +0,0 @@ -TPS65132 regulators - -Required properties: -- compatible: "ti,tps65132" -- reg: I2C slave address - -Optional Subnode: -Device supports two regulators OUTP and OUTN. A sub node within the - device node describe the properties of these regulators. The sub-node - names must be as follows: - -For regulator outp, the sub node name should be "outp". - -For regulator outn, the sub node name should be "outn". - --enable-gpios:(active high, output) Regulators are controlled by the input pins. - If it is connected to GPIO through host system then provide the - gpio number as per gpio.txt. --active-discharge-gpios: (active high, output) Some configurations use delay mechanisms - on the enable pin, to keep the regulator enabled for some time after - the enable signal goes low. This GPIO is used to actively discharge - the delay mechanism. Requires specification of ti,active-discharge-time-us --ti,active-discharge-time-us: how long the active discharge gpio should be - asserted for during active discharge, in microseconds. - -Each regulator is defined using the standard binding for regulators. - -Example: - - tps65132@3e { - compatible = "ti,tps65132"; - reg = <0x3e>; - - outp { - regulator-name = "outp"; - regulator-boot-on; - regulator-always-on; - enable-gpios = <&gpio 23 0>; - }; - - outn { - regulator-name = "outn"; - regulator-boot-on; - regulator-always-on; - regulator-active-discharge = <0>; - enable-gpios = <&gpio 40 0>; - }; - }; diff --git a/dts/Bindings/remoteproc/mtk,scp.yaml b/dts/Bindings/remoteproc/mtk,scp.yaml index 09102dda49..507f98f73d 100644 --- a/dts/Bindings/remoteproc/mtk,scp.yaml +++ b/dts/Bindings/remoteproc/mtk,scp.yaml @@ -47,7 +47,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when @@ -115,7 +115,7 @@ patternProperties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when diff --git a/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml b/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml index 884158bccd..3766d4513b 100644 --- a/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -18,7 +18,6 @@ properties: const: qcom,glink-rpm label: - $ref: /schemas/types.yaml#/definitions/string description: Name of the edge, used for debugging and identification purposes. The node name will be used if this is not present. diff --git a/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml b/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml index eb868a7ff4..ad45fd00ae 100644 --- a/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml @@ -46,7 +46,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml b/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml index c054b84fdc..66b455d0a8 100644 --- a/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml @@ -45,7 +45,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/dts/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index b6bd334385..9381c7022f 100644 --- a/dts/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/dts/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -80,7 +80,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: The name of the firmware which should be loaded for this remote processor. diff --git a/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml b/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml index 4744a37b2b..45ee9fbe09 100644 --- a/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml @@ -42,7 +42,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml b/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml index 0282872359..758adb06c8 100644 --- a/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml @@ -47,7 +47,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml b/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml index f7e40fb166..c1a3cc308b 100644 --- a/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml @@ -42,7 +42,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sm6375-pas.yaml b/dts/Bindings/remoteproc/qcom,sm6375-pas.yaml index 3e4a03eb45..7286b2baa1 100644 --- a/dts/Bindings/remoteproc/qcom,sm6375-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm6375-pas.yaml @@ -36,7 +36,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core smd-edge: false diff --git a/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml index 238c6e5e67..d67386c50f 100644 --- a/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml @@ -46,7 +46,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml index 53cea8e53a..4b9fb74fb9 100644 --- a/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml @@ -47,7 +47,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml index 58120829fb..73fda7565c 100644 --- a/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml @@ -19,6 +19,11 @@ properties: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas - qcom,sm8550-mpss-pas + - qcom,sm8650-adsp-pas + - qcom,sm8650-cdsp-pas + - qcom,sm8650-mpss-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas reg: maxItems: 1 @@ -49,6 +54,8 @@ properties: - description: Memory region for main Firmware authentication - description: Memory region for Devicetree Firmware authentication - description: DSM Memory region + - description: DSM Memory region 2 + - description: Memory region for Qlink Logging required: - compatible @@ -63,6 +70,9 @@ allOf: enum: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas then: properties: interrupts: @@ -71,7 +81,26 @@ allOf: maxItems: 5 memory-region: maxItems: 2 - else: + - if: + properties: + compatible: + enum: + - qcom,sm8650-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + memory-region: + minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8550-mpss-pas + then: properties: interrupts: minItems: 6 @@ -79,12 +108,29 @@ allOf: minItems: 6 memory-region: minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8650-mpss-pas + then: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + memory-region: + minItems: 5 + maxItems: 5 - if: properties: compatible: enum: - qcom,sm8550-adsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas then: properties: power-domains: @@ -101,6 +147,7 @@ allOf: compatible: enum: - qcom,sm8550-mpss-pas + - qcom,sm8650-mpss-pas then: properties: power-domains: @@ -116,6 +163,8 @@ allOf: compatible: enum: - qcom,sm8550-cdsp-pas + - qcom,sm8650-cdsp-pas + - qcom,x1e80100-cdsp-pas then: properties: power-domains: diff --git a/dts/Bindings/remoteproc/qcom,wcnss-pil.yaml b/dts/Bindings/remoteproc/qcom,wcnss-pil.yaml index 45eb42bd3c..8e033b22d2 100644 --- a/dts/Bindings/remoteproc/qcom,wcnss-pil.yaml +++ b/dts/Bindings/remoteproc/qcom,wcnss-pil.yaml @@ -51,7 +51,7 @@ properties: - const: stop-ack firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Relative firmware image path for the WCNSS core. Defaults to "wcnss.mdt". diff --git a/dts/Bindings/remoteproc/ti,davinci-rproc.txt b/dts/Bindings/remoteproc/ti,davinci-rproc.txt index 25f8658e21..48a49c516b 100644 --- a/dts/Bindings/remoteproc/ti,davinci-rproc.txt +++ b/dts/Bindings/remoteproc/ti,davinci-rproc.txt @@ -1,9 +1,6 @@ TI Davinci DSP devices ======================= -Binding status: Unstable - Subject to changes for DT representation of clocks - and resets - The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that is used to offload some of the processor-intensive tasks or algorithms, for achieving various system level goals. diff --git a/dts/Bindings/reset/mobileye,eyeq5-reset.yaml b/dts/Bindings/reset/mobileye,eyeq5-reset.yaml new file mode 100644 index 0000000000..062b451834 --- /dev/null +++ b/dts/Bindings/reset/mobileye,eyeq5-reset.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 reset controller + +description: + The EyeQ5 reset driver handles three reset domains. Its registers live in a + shared region called OLB. + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +properties: + compatible: + const: mobileye,eyeq5-reset + + reg: + maxItems: 3 + + reg-names: + items: + - const: d0 + - const: d1 + - const: d2 + + "#reset-cells": + const: 2 + description: + The first cell is the domain (0 to 2 inclusive) and the second one is the + reset index inside that domain. + +required: + - compatible + - reg + - reg-names + - "#reset-cells" + +additionalProperties: false diff --git a/dts/Bindings/reset/renesas,rst.yaml b/dts/Bindings/reset/renesas,rst.yaml index e7e4872477..58b4a45d33 100644 --- a/dts/Bindings/reset/renesas,rst.yaml +++ b/dts/Bindings/reset/renesas,rst.yaml @@ -50,6 +50,7 @@ properties: - renesas,r8a779a0-rst # R-Car V3U - renesas,r8a779f0-rst # R-Car S4-8 - renesas,r8a779g0-rst # R-Car V4H + - renesas,r8a779h0-rst # R-Car V4M reg: maxItems: 1 diff --git a/dts/Bindings/reset/sophgo,sg2042-reset.yaml b/dts/Bindings/reset/sophgo,sg2042-reset.yaml new file mode 100644 index 0000000000..76e1931f09 --- /dev/null +++ b/dts/Bindings/reset/sophgo,sg2042-reset.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 SoC Reset Controller + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstgen: reset-controller@c00 { + compatible = "sophgo,sg2042-reset"; + reg = <0xc00 0xc>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/riscv/cpus.yaml b/dts/Bindings/riscv/cpus.yaml index 9d8670c00e..d87dd50f1a 100644 --- a/dts/Bindings/riscv/cpus.yaml +++ b/dts/Bindings/riscv/cpus.yaml @@ -75,6 +75,10 @@ properties: - riscv,sv57 - riscv,none + reg: + description: + The hart ID of this CPU node. + riscv,cbom-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -106,7 +110,11 @@ properties: const: 1 compatible: - const: riscv,cpu-intc + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc interrupt-controller: true diff --git a/dts/Bindings/riscv/extensions.yaml b/dts/Bindings/riscv/extensions.yaml index 63d81dc895..468c646247 100644 --- a/dts/Bindings/riscv/extensions.yaml +++ b/dts/Bindings/riscv/extensions.yaml @@ -477,5 +477,12 @@ properties: latency, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: xandespmu + description: + The Andes Technology performance monitor extension for counter overflow + and privilege mode filtering. For more details, see Counter Related + Registers in the AX45MP datasheet. + https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + additionalProperties: true ... diff --git a/dts/Bindings/rng/atmel,at91-trng.yaml b/dts/Bindings/rng/atmel,at91-trng.yaml index 3ce45456d8..b38f825234 100644 --- a/dts/Bindings/rng/atmel,at91-trng.yaml +++ b/dts/Bindings/rng/atmel,at91-trng.yaml @@ -21,6 +21,10 @@ properties: - enum: - microchip,sama7g5-trng - const: atmel,at91sam9g45-trng + - items: + - enum: + - microchip,sam9x7-trng + - const: microchip,sam9x60-trng clocks: maxItems: 1 diff --git a/dts/Bindings/rtc/abracon,abx80x.txt b/dts/Bindings/rtc/abracon,abx80x.txt deleted file mode 100644 index 2405e35a1b..0000000000 --- a/dts/Bindings/rtc/abracon,abx80x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Abracon ABX80X I2C ultra low power RTC/Alarm chip - -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 -is the superset of ab180x. - -Required properties: - - - "compatible": should one of: - "abracon,abx80x" - "abracon,ab0801" - "abracon,ab0803" - "abracon,ab0804" - "abracon,ab0805" - "abracon,ab1801" - "abracon,ab1803" - "abracon,ab1804" - "abracon,ab1805" - "microcrystal,rv1805" - Using "abracon,abx80x" will enable chip autodetection. - - "reg": I2C bus address of the device - -Optional properties: - -The abx804 and abx805 have a trickle charger that is able to charge the -connected battery or supercap. Both the following properties have to be defined -and valid to enable charging: - - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in kOhm. diff --git a/dts/Bindings/rtc/abracon,abx80x.yaml b/dts/Bindings/rtc/abracon,abx80x.yaml new file mode 100644 index 0000000000..355b059841 --- /dev/null +++ b/dts/Bindings/rtc/abracon,abx80x.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip + +maintainers: + - linux-rtc@vger.kernel.org + +properties: + compatible: + description: + The wildcard 'abracon,abx80x' may be used to support a mix + of different abracon rtc`s. In this case the driver + must perform auto-detection from ID register. + enum: + - abracon,abx80x + - abracon,ab0801 + - abracon,ab0803 + - abracon,ab0804 + - abracon,ab0805 + - abracon,ab1801 + - abracon,ab1803 + - abracon,ab1804 + - abracon,ab1805 + - microcrystal,rv1805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + abracon,tc-diode: + description: + Trickle-charge diode type. + Required to enable charging backup battery. + + Supported are 'standard' diodes with a 0.6V drop + and 'schottky' diodes with a 0.3V drop. + $ref: /schemas/types.yaml#/definitions/string + enum: + - standard + - schottky + + abracon,tc-resistor: + description: + Trickle-charge resistor value in kOhm. + Required to enable charging backup battery. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 3, 6, 11] + +dependentRequired: + abracon,tc-diode: ["abracon,tc-resistor"] + abracon,tc-resistor: ["abracon,tc-diode"] + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + not: + contains: + enum: + - abracon,abx80x + - abracon,ab0804 + - abracon,ab1804 + - abracon,ab0805 + - abracon,ab1805 + then: + properties: + abracon,tc-diode: false + abracon,tc-resistor: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@69 { + compatible = "abracon,abx80x"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/dts/Bindings/rtc/atmel,at91sam9260-rtt.yaml b/dts/Bindings/rtc/atmel,at91sam9260-rtt.yaml index b80b85c394..a7f6c1d1a0 100644 --- a/dts/Bindings/rtc/atmel,at91sam9260-rtt.yaml +++ b/dts/Bindings/rtc/atmel,at91sam9260-rtt.yaml @@ -19,7 +19,9 @@ properties: - items: - const: atmel,at91sam9260-rtt - items: - - const: microchip,sam9x60-rtt + - enum: + - microchip,sam9x60-rtt + - microchip,sam9x7-rtt - const: atmel,at91sam9260-rtt - items: - const: microchip,sama7g5-rtt diff --git a/dts/Bindings/rtc/mediatek,mt2712-rtc.yaml b/dts/Bindings/rtc/mediatek,mt2712-rtc.yaml new file mode 100644 index 0000000000..75624ddf6d --- /dev/null +++ b/dts/Bindings/rtc/mediatek,mt2712-rtc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT2712 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Ran Bi <ran.bi@mediatek.com> + +properties: + compatible: + const: mediatek,mt2712-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0x10011000 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/dts/Bindings/rtc/mediatek,mt7622-rtc.yaml b/dts/Bindings/rtc/mediatek,mt7622-rtc.yaml new file mode 100644 index 0000000000..e74dfc161c --- /dev/null +++ b/dts/Bindings/rtc/mediatek,mt7622-rtc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7622 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +properties: + compatible: + items: + - const: mediatek,mt7622-rtc + - const: mediatek,soc-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: rtc + +required: + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10212800 { + compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc"; + reg = <0x10212800 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; + }; diff --git a/dts/Bindings/rtc/rtc-mt2712.txt b/dts/Bindings/rtc/rtc-mt2712.txt deleted file mode 100644 index c33d87e5e7..0000000000 --- a/dts/Bindings/rtc/rtc-mt2712.txt +++ /dev/null @@ -1,14 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; - -Example: - -rtc: rtc@10011000 { - compatible = "mediatek,mt2712-rtc"; - reg = <0 0x10011000 0 0x1000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; -}; diff --git a/dts/Bindings/rtc/rtc-mt7622.txt b/dts/Bindings/rtc/rtc-mt7622.txt deleted file mode 100644 index 09fe8f5147..0000000000 --- a/dts/Bindings/rtc/rtc-mt7622.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be - "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; -- clocks : Specifies list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : Should contain "rtc" entries - -Example: - -rtc: rtc@10212800 { - compatible = "mediatek,mt7622-rtc", - "mediatek,soc-rtc"; - reg = <0 0x10212800 0 0x200>; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_RTC>; - clock-names = "rtc"; -}; diff --git a/dts/Bindings/rtc/sa1100-rtc.yaml b/dts/Bindings/rtc/sa1100-rtc.yaml index a16c355dcd..fcf52d2cac 100644 --- a/dts/Bindings/rtc/sa1100-rtc.yaml +++ b/dts/Bindings/rtc/sa1100-rtc.yaml @@ -12,7 +12,7 @@ allOf: maintainers: - Alessandro Zummo <a.zummo@towertech.it> - Alexandre Belloni <alexandre.belloni@bootlin.com> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> properties: compatible: diff --git a/dts/Bindings/rtc/xlnx,zynqmp-rtc.yaml b/dts/Bindings/rtc/xlnx,zynqmp-rtc.yaml index d1f5eb996d..01cc90fee8 100644 --- a/dts/Bindings/rtc/xlnx,zynqmp-rtc.yaml +++ b/dts/Bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -18,7 +18,13 @@ allOf: properties: compatible: - const: xlnx,zynqmp-rtc + oneOf: + - const: xlnx,zynqmp-rtc + - items: + - enum: + - xlnx,versal-rtc + - xlnx,versal-net-rtc + - const: xlnx,zynqmp-rtc reg: maxItems: 1 @@ -48,6 +54,9 @@ properties: default: 0x198233 deprecated: true + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/serial/atmel,at91-usart.yaml b/dts/Bindings/serial/atmel,at91-usart.yaml index 65cb2e5c5e..eb2992a447 100644 --- a/dts/Bindings/serial/atmel,at91-usart.yaml +++ b/dts/Bindings/serial/atmel,at91-usart.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) maintainers: - - Richard Genoud <richard.genoud@gmail.com> + - Richard Genoud <richard.genoud@bootlin.com> properties: compatible: diff --git a/dts/Bindings/serial/cdns,uart.yaml b/dts/Bindings/serial/cdns,uart.yaml index e35ad1109e..2129247d7c 100644 --- a/dts/Bindings/serial/cdns,uart.yaml +++ b/dts/Bindings/serial/cdns,uart.yaml @@ -55,6 +55,7 @@ required: allOf: - $ref: serial.yaml# + - $ref: rs485.yaml# - if: properties: compatible: diff --git a/dts/Bindings/serial/fsl-lpuart.yaml b/dts/Bindings/serial/fsl-lpuart.yaml index 3a5b59f5d3..3f9ace89de 100644 --- a/dts/Bindings/serial/fsl-lpuart.yaml +++ b/dts/Bindings/serial/fsl-lpuart.yaml @@ -30,6 +30,7 @@ properties: - items: - enum: - fsl,imx93-lpuart + - fsl,imx95-lpuart - const: fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: diff --git a/dts/Bindings/serial/renesas,hscif.yaml b/dts/Bindings/serial/renesas,hscif.yaml index 2046e2dc0a..9480ed3091 100644 --- a/dts/Bindings/serial/renesas,hscif.yaml +++ b/dts/Bindings/serial/renesas,hscif.yaml @@ -59,6 +59,7 @@ properties: - renesas,hscif-r8a779a0 # R-Car V3U - renesas,hscif-r8a779f0 # R-Car S4-8 - renesas,hscif-r8a779g0 # R-Car V4H + - renesas,hscif-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/dts/Bindings/serial/samsung_uart.yaml b/dts/Bindings/serial/samsung_uart.yaml index 133259ed3a..0f01310269 100644 --- a/dts/Bindings/serial/samsung_uart.yaml +++ b/dts/Bindings/serial/samsung_uart.yaml @@ -143,6 +143,8 @@ allOf: then: required: - samsung,uart-fifosize + properties: + reg-io-width: false unevaluatedProperties: false diff --git a/dts/Bindings/serial/serial.yaml b/dts/Bindings/serial/serial.yaml index 65804ca274..ffc9198ae2 100644 --- a/dts/Bindings/serial/serial.yaml +++ b/dts/Bindings/serial/serial.yaml @@ -88,7 +88,7 @@ properties: TX FIFO threshold configuration (in bytes). patternProperties: - "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$": + "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$": if: type: object then: diff --git a/dts/Bindings/serial/st,asc.yaml b/dts/Bindings/serial/st,asc.yaml new file mode 100644 index 0000000000..f2083388f3 --- /dev/null +++ b/dts/Bindings/serial/st,asc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/st,asc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi SoCs Serial Port + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: st,asc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + st,hw-flow-ctrl: + description: When set, enable hardware flow control. + type: boolean + + st,force-m1: + description: When set, force asc to be in Mode-1. This is recommended for + high bit rates above 19.2K. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/stih407-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + }; +... diff --git a/dts/Bindings/serial/st,stm32-uart.yaml b/dts/Bindings/serial/st,stm32-uart.yaml index 1df8ffe95f..62f97da1b2 100644 --- a/dts/Bindings/serial/st,stm32-uart.yaml +++ b/dts/Bindings/serial/st,stm32-uart.yaml @@ -58,6 +58,9 @@ properties: wakeup-source: true + power-domains: + maxItems: 1 + rx-threshold: description: If value is set to 1, RX FIFO threshold is disabled. diff --git a/dts/Bindings/serial/st-asc.txt b/dts/Bindings/serial/st-asc.txt deleted file mode 100644 index a1b9b6f349..0000000000 --- a/dts/Bindings/serial/st-asc.txt +++ /dev/null @@ -1,18 +0,0 @@ -*st-asc(Serial Port) - -Required properties: -- compatible : Should be "st,asc". -- reg, reg-names, interrupts, interrupt-names : Standard way to define device - resources with names. look in - Documentation/devicetree/bindings/resource-names.txt - -Optional properties: -- st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommended - for high bit rates (above 19.2K) -Example: -serial@fe440000{ - compatible = "st,asc"; - reg = <0xfe440000 0x2c>; - interrupts = <0 209 0>; -}; diff --git a/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml index 397f75909b..ce1a6505eb 100644 --- a/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml +++ b/dts/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -51,7 +51,7 @@ properties: ranges: true patternProperties: - "^clock-controller@[0-9a-z]+$": + "^clock-controller@[0-9a-f]+$": $ref: /schemas/clock/fsl,flexspi-clock.yaml# required: diff --git a/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml index 8d088b5fe8..a6a511b00a 100644 --- a/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml +++ b/dts/Bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -41,7 +41,7 @@ properties: ranges: true patternProperties: - "^interrupt-controller@[a-z0-9]+$": + "^interrupt-controller@[a-f0-9]+$": $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# required: diff --git a/dts/Bindings/soc/imx/fsl,imx-anatop.yaml b/dts/Bindings/soc/imx/fsl,imx-anatop.yaml new file mode 100644 index 0000000000..c4ae4f2842 --- /dev/null +++ b/dts/Bindings/soc/imx/fsl,imx-anatop.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ANATOP register + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx6sl-anatop + - fsl,imx6sll-anatop + - fsl,imx6sx-anatop + - fsl,imx6ul-anatop + - fsl,imx7d-anatop + - const: fsl,imx6q-anatop + - const: syscon + - const: simple-mfd + - items: + - const: fsl,imx6q-anatop + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + interrupts: + items: + - description: Temperature sensor event + - description: Brown-out event on either of the support regulators + - description: Brown-out event on either the core, gpu or soc regulators + + tempmon: + type: object + unevaluatedProperties: false + $ref: /schemas/thermal/imx-thermal.yaml + +patternProperties: + "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$": + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/anatop-regulator.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + anatop: anatop@20c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-mfd"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/dts/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/dts/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml index 1da1b758b4..8451cb4dd8 100644 --- a/dts/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml +++ b/dts/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml @@ -17,7 +17,23 @@ properties: compatible: oneOf: - items: - - const: fsl,imx8mq-iomuxc-gpr + - enum: + - fsl,imx6q-iomuxc-gpr + - fsl,imx8mq-iomuxc-gpr + - const: syscon + - const: simple-mfd + - items: + - enum: + - fsl,imx6sl-iomuxc-gpr + - fsl,imx6sll-iomuxc-gpr + - fsl,imx6ul-iomuxc-gpr + - const: fsl,imx6q-iomuxc-gpr + - const: syscon + - items: + - enum: + - fsl,imx6sx-iomuxc-gpr + - fsl,imx7d-iomuxc-gpr + - const: fsl,imx6q-iomuxc-gpr - const: syscon - const: simple-mfd - items: diff --git a/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml index 1be4ce2a45..bd1cdaa4f5 100644 --- a/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml +++ b/dts/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -27,8 +27,8 @@ properties: const: 1 power-domains: - minItems: 8 - maxItems: 8 + minItems: 10 + maxItems: 10 power-domain-names: items: @@ -40,10 +40,12 @@ properties: - const: trng - const: hdmi-tx - const: hdmi-tx-phy + - const: hdcp + - const: hrv clocks: - minItems: 4 - maxItems: 4 + minItems: 5 + maxItems: 5 clock-names: items: @@ -51,6 +53,7 @@ properties: - const: axi - const: ref_266m - const: ref_24m + - const: fdcc interconnects: maxItems: 3 @@ -82,12 +85,15 @@ examples: clocks = <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_ROOT>, <&clk IMX8MP_CLK_HDMI_REF_266M>, - <&clk IMX8MP_CLK_HDMI_24M>; - clock-names = "apb", "axi", "ref_266m", "ref_24m"; + <&clk IMX8MP_CLK_HDMI_24M>, + <&clk IMX8MP_CLK_HDMI_FDCC_TST>; + clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc"; power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, - <&pgc_hdmimix>, <&pgc_hdmi_phy>; + <&pgc_hdmimix>, <&pgc_hdmi_phy>, + <&pgc_hdmimix>, <&pgc_hdmimix>; power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", - "hdmi-tx", "hdmi-tx-phy"; + "hdmi-tx", "hdmi-tx-phy", + "hdcp", "hrv"; #power-domain-cells = <1>; }; diff --git a/dts/Bindings/soc/qcom/qcom,pbs.yaml b/dts/Bindings/soc/qcom/qcom,pbs.yaml new file mode 100644 index 0000000000..b502ca7226 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,pbs.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,pbs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Programmable Boot Sequencer + +maintainers: + - Anjelique Melendez <quic_amelende@quicinc.com> + +description: | + The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS) + supports triggering power up and power down sequences for clients + upon request. + +properties: + compatible: + items: + - enum: + - qcom,pmi632-pbs + - const: qcom,pbs + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pbs@7400 { + compatible = "qcom,pmi632-pbs", "qcom,pbs"; + reg = <0x7400>; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml index 61df97ffe1..4310bae6c5 100644 --- a/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - qcom,qcm6490-pmic-glink - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink @@ -32,6 +33,7 @@ properties: - items: - enum: - qcom,sm8650-pmic-glink + - qcom,x1e80100-pmic-glink - const: qcom,sm8550-pmic-glink - const: qcom,pmic-glink @@ -65,6 +67,7 @@ allOf: enum: - qcom,sm8450-pmic-glink - qcom,sm8550-pmic-glink + - qcom,x1e80100-pmic-glink then: properties: orientation-gpios: false diff --git a/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml index 031800985b..9410404f87 100644 --- a/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml +++ b/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -35,6 +35,8 @@ properties: description: Phandle to an RPM MSG RAM slice containing the master stats minItems: 1 maxItems: 5 + items: + maxItems: 1 qcom,master-names: $ref: /schemas/types.yaml#/definitions/string-array diff --git a/dts/Bindings/soc/qcom/qcom,spm.yaml b/dts/Bindings/soc/qcom/qcom,saw2.yaml index 20c8cd38ff..ca4bce8172 100644 --- a/dts/Bindings/soc/qcom/qcom,spm.yaml +++ b/dts/Bindings/soc/qcom/qcom,saw2.yaml @@ -1,23 +1,33 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml# +$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Subsystem Power Manager +title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2) maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> description: | - This binding describes the Qualcomm Subsystem Power Manager, used to control - the peripheral logic surrounding the application cores in Qualcomm platforms. + The Qualcomm Subsystem Power Manager is used to control the peripheral logic + surrounding the application cores in Qualcomm platforms. + + The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the + Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable + power-controller that transitions a piece of hardware (like a processor or + subsystem) into and out of low power modes via a direct connection to + the PMIC. It can also be wired up to interact with other processors in the + system, notifying them when a low power state is entered or exited. properties: compatible: items: - enum: + - qcom,ipq4019-saw2-cpu + - qcom,ipq4019-saw2-l2 + - qcom,ipq8064-saw2-cpu - qcom,sdm660-gold-saw2-v4.1-l2 - qcom,sdm660-silver-saw2-v4.1-l2 - qcom,msm8998-gold-saw2-v4.1-l2 @@ -26,16 +36,27 @@ properties: - qcom,msm8916-saw2-v3.0-cpu - qcom,msm8939-saw2-v3.0-cpu - qcom,msm8226-saw2-v2.1-cpu + - qcom,msm8226-saw2-v2.1-l2 + - qcom,msm8960-saw2-cpu - qcom,msm8974-saw2-v2.1-cpu + - qcom,msm8974-saw2-v2.1-l2 - qcom,msm8976-gold-saw2-v2.3-l2 - qcom,msm8976-silver-saw2-v2.3-l2 - qcom,apq8084-saw2-v2.1-cpu + - qcom,apq8084-saw2-v2.1-l2 - qcom,apq8064-saw2-v1.1-cpu - const: qcom,saw2 reg: - description: Base address and size of the SPM register region - maxItems: 1 + items: + - description: Base address and size of the SPM register region + - description: Base address and size of the alias register region + minItems: 1 + + regulator: + $ref: /schemas/regulator/regulator.yaml# + description: Indicates that this SPM device acts as a regulator device + device for the core (CPU or Cache) the SPM is attached to. required: - compatible @@ -82,4 +103,17 @@ examples: reg = <0x17912000 0x1000>; }; + - | + /* + * Example 3: SAW2 with the bundled regulator definition. + */ + power-manager@2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + + regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; ... diff --git a/dts/Bindings/soc/renesas/renesas-soc.yaml b/dts/Bindings/soc/renesas/renesas-soc.yaml new file mode 100644 index 0000000000..5ddd31f30f --- /dev/null +++ b/dts/Bindings/soc/renesas/renesas-soc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SoC compatibles naming convention + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + renesas,SoC-IP + + For example:: + renesas,r8a77965-csi2 + + When adding new compatibles to existing bindings, use the format in the + existing binding, even if it contradicts the above. + +select: + properties: + compatible: + contains: + pattern: "^renesas,.+-.+$" + required: + - compatible + +properties: + compatible: + minItems: 1 + maxItems: 4 + items: + anyOf: + # Preferred naming style for compatibles of SoC components + - pattern: "^renesas,(emev2|r(7s|8a|9a)[a-z0-9]+|rcar|rmobile|rz[a-z0-9]*|sh(7[a-z0-9]+)?|mobile)-[a-z0-9-]+$" + - pattern: "^renesas,(condor|falcon|gr-peach|gray-hawk|salvator|sk-rz|smar(c(2)?)?|spider|white-hawk)(.*)?$" + + # Legacy compatibles + # + # New compatibles are not allowed. + - pattern: "^renesas,(can|cpg|dmac|du|(g)?ether(avb)?|gpio|hscif|(r)?i[i2]c|imr|intc|ipmmu|irqc|jpu|mmcif|msiof|mtu2|pci(e)?|pfc|pwm|[rq]spi|rcar_sound|sata|scif[ab]*|sdhi|thermal|tmu|tpu|usb(2|hs)?|vin|xhci)-[a-z0-9-]+$" + - pattern: "^renesas,(d|s)?bsc(3)?-(r8a73a4|r8a7740|sh73a0)$" + - pattern: "^renesas,em-(gio|sti|uart)$" + - pattern: "^renesas,fsi2-(r8a7740|sh73a0)$" + - pattern: "^renesas,hspi-r8a777[89]$" + - pattern: "^renesas,sysc-(r8a73a4|r8a7740|rmobile|sh73a0)$" + - enum: + - renesas,imr-lx4 + - renesas,mtu2-r7s72100 + + # None SoC component compatibles + # + # Compatibles with the Renesas vendor prefix that do not relate to any SoC + # component are OK. New compatibles are allowed. + - enum: + - renesas,smp-sram + + # Do not fail compatibles not matching the select pattern + # + # Some SoC components in addition to a Renesas compatible list + # compatibles not related to Renesas. The select pattern for this + # schema hits all compatibles that have at lest one Renesas compatible + # and try to validate all values in that compatible array, allow all + # that don't match the schema select pattern. For example, + # + # compatible = "renesas,r9a07g044-mali", "arm,mali-bifrost"; + - pattern: "^(?!renesas,.+-.+).+$" + +additionalProperties: true diff --git a/dts/Bindings/soc/renesas/renesas.yaml b/dts/Bindings/soc/renesas/renesas.yaml index 16ca3ff7b1..c1ce4da2dc 100644 --- a/dts/Bindings/soc/renesas/renesas.yaml +++ b/dts/Bindings/soc/renesas/renesas.yaml @@ -348,12 +348,25 @@ properties: - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) - const: renesas,r8a779g0 + - description: R-Car V4H (R8A779G2) + items: + - enum: + - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001) + - const: renesas,r8a779g2 + - const: renesas,r8a779g0 + - items: - enum: - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) - const: renesas,white-hawk-cpu - const: renesas,r8a779g0 + - description: R-Car V4M (R8A779H0) + items: + - enum: + - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S) + - const: renesas,r8a779h0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -475,12 +488,6 @@ properties: - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L - const: renesas,r9a07g054 - - description: RZ/V2M (R9A09G011) - items: - - enum: - - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - - const: renesas,r9a09g011 - - description: RZ/G3S (R9A08G045) items: - enum: @@ -500,6 +507,12 @@ properties: - const: renesas,r9a08g045s33 # PCIe support - const: renesas,r9a08g045 + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + additionalProperties: true ... diff --git a/dts/Bindings/soc/rockchip/grf.yaml b/dts/Bindings/soc/rockchip/grf.yaml index 9793ea6f0f..79798c7474 100644 --- a/dts/Bindings/soc/rockchip/grf.yaml +++ b/dts/Bindings/soc/rockchip/grf.yaml @@ -22,12 +22,15 @@ properties: - rockchip,rk3568-usb2phy-grf - rockchip,rk3588-bigcore0-grf - rockchip,rk3588-bigcore1-grf + - rockchip,rk3588-hdptxphy-grf - rockchip,rk3588-ioc - rockchip,rk3588-php-grf - rockchip,rk3588-pipe-phy-grf - rockchip,rk3588-sys-grf - rockchip,rk3588-pcie3-phy-grf - rockchip,rk3588-pcie3-pipe-grf + - rockchip,rk3588-usb-grf + - rockchip,rk3588-usbdpphy-grf - rockchip,rk3588-vo-grf - rockchip,rk3588-vop-grf - rockchip,rv1108-usbgrf @@ -66,6 +69,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + "#address-cells": const: 1 @@ -165,6 +171,7 @@ allOf: unevaluatedProperties: false pcie-phy: + type: object description: Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt @@ -248,6 +255,22 @@ allOf: unevaluatedProperties: false + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3588-vo-grf + + then: + required: + - clocks + + else: + properties: + clocks: false + + examples: - | #include <dt-bindings/clock/rk3399-cru.h> diff --git a/dts/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/dts/Bindings/soc/samsung/samsung,exynos-sysreg.yaml index 1794e3799f..c0c6ce8fc7 100644 --- a/dts/Bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/dts/Bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -72,6 +72,8 @@ allOf: compatible: contains: enum: + - google,gs101-peric0-sysreg + - google,gs101-peric1-sysreg - samsung,exynos850-cmgp-sysreg - samsung,exynos850-peri-sysreg - samsung,exynos850-sysreg diff --git a/dts/Bindings/soc/xilinx/xilinx.yaml b/dts/Bindings/soc/xilinx/xilinx.yaml index d4c0fe1fe4..131aba5ed9 100644 --- a/dts/Bindings/soc/xilinx/xilinx.yaml +++ b/dts/Bindings/soc/xilinx/xilinx.yaml @@ -117,20 +117,70 @@ properties: - const: xlnx,zynqmp - description: Xilinx Kria SOMs + minItems: 3 items: - - const: xlnx,zynqmp-sm-k26-rev1 - - const: xlnx,zynqmp-sm-k26-revB - - const: xlnx,zynqmp-sm-k26-revA - - const: xlnx,zynqmp-sm-k26 - - const: xlnx,zynqmp + enum: + - xlnx,zynqmp-sm-k26-rev2 + - xlnx,zynqmp-sm-k26-rev1 + - xlnx,zynqmp-sm-k26-revB + - xlnx,zynqmp-sm-k26-revA + - xlnx,zynqmp-sm-k26 + - xlnx,zynqmp + allOf: + - contains: + const: xlnx,zynqmp + - contains: + const: xlnx,zynqmp-sm-k26 - description: Xilinx Kria SOMs (starter) + minItems: 3 items: - - const: xlnx,zynqmp-smk-k26-rev1 - - const: xlnx,zynqmp-smk-k26-revB - - const: xlnx,zynqmp-smk-k26-revA - - const: xlnx,zynqmp-smk-k26 - - const: xlnx,zynqmp + enum: + - xlnx,zynqmp-smk-k26-rev2 + - xlnx,zynqmp-smk-k26-rev1 + - xlnx,zynqmp-smk-k26-revB + - xlnx,zynqmp-smk-k26-revA + - xlnx,zynqmp-smk-k26 + - xlnx,zynqmp + allOf: + - contains: + const: xlnx,zynqmp + - contains: + const: xlnx,zynqmp-smk-k26 + + - description: Xilinx Kria SOM KV260 revA/Y/Z + minItems: 3 + items: + enum: + - xlnx,zynqmp-sk-kv260-revA + - xlnx,zynqmp-sk-kv260-revY + - xlnx,zynqmp-sk-kv260-revZ + - xlnx,zynqmp-sk-kv260 + - xlnx,zynqmp + allOf: + - contains: + const: xlnx,zynqmp-sk-kv260-revA + - contains: + const: xlnx,zynqmp-sk-kv260 + - contains: + const: xlnx,zynqmp + + - description: Xilinx Kria SOM KV260 rev2/1/B + minItems: 3 + items: + enum: + - xlnx,zynqmp-sk-kv260-rev2 + - xlnx,zynqmp-sk-kv260-rev1 + - xlnx,zynqmp-sk-kv260-revB + - xlnx,zynqmp-sk-kv260 + - xlnx,zynqmp + allOf: + - contains: + const: xlnx,zynqmp-sk-kv260-revB + - contains: + const: xlnx,zynqmp-sk-kv260 + - contains: + const: xlnx,zynqmp - description: AMD MicroBlaze V (QEMU) items: diff --git a/dts/Bindings/sound/atmel,asoc-wm8904.yaml b/dts/Bindings/sound/atmel,asoc-wm8904.yaml new file mode 100644 index 0000000000..89a67f8e33 --- /dev/null +++ b/dts/Bindings/sound/atmel,asoc-wm8904.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel wm8904 audio codec complex + +maintainers: + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The ASoC audio complex configuration for Atmel with WM8904 audio codec. + +properties: + compatible: + const: atmel,asoc-wm8904 + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + - Mic + # WM8904 CODEC Pins + - IN1L + - IN1R + - IN2L + - IN2R + - IN3L + - IN3R + - HPOUTL + - HPOUTR + - LINEOUTL + - LINEOUTR + - MICBIAS + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12EK"; + + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; diff --git a/dts/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/dts/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml new file mode 100644 index 0000000000..33717b728f --- /dev/null +++ b/dts/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9x5ek wm8731 audio complex + +maintainers: + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec. + +properties: + compatible: + const: atmel,sam9x5-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + + # CODEC Pins + - LOUT + - ROUT + - LHPOUT + - RHPOUT + - LLINEIN + - RLINEIN + - MICIN + +required: + - compatible + - atmel,model + - atmel,ssc-controller + - atmel,audio-codec + - atmel,audio-routing + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/dts/Bindings/sound/atmel,sama5d2-classd.yaml b/dts/Bindings/sound/atmel,sama5d2-classd.yaml index 43d04702ac..ae3162fcfe 100644 --- a/dts/Bindings/sound/atmel,sama5d2-classd.yaml +++ b/dts/Bindings/sound/atmel,sama5d2-classd.yaml @@ -18,7 +18,12 @@ description: properties: compatible: - const: atmel,sama5d2-classd + oneOf: + - items: + - const: atmel,sama5d2-classd + - items: + - const: microchip,sam9x7-classd + - const: atmel,sama5d2-classd reg: maxItems: 1 diff --git a/dts/Bindings/sound/atmel-sam9x5-wm8731-audio.txt b/dts/Bindings/sound/atmel-sam9x5-wm8731-audio.txt deleted file mode 100644 index 8facbce53d..0000000000 --- a/dts/Bindings/sound/atmel-sam9x5-wm8731-audio.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Atmel at91sam9x5ek wm8731 audio complex - -Required properties: - - compatible: "atmel,sam9x5-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. - -Available audio endpoints for the audio-routing table: - -Board connectors: - * Headphone Jack - * Line In Jack - -wm8731 pins: -cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml - -Example: -sound { - compatible = "atmel,sam9x5-wm8731-audio"; - - atmel,model = "wm8731 @ AT91SAM9X5EK"; - - atmel,audio-routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "LLINEIN", "Line In Jack", - "RLINEIN", "Line In Jack"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; diff --git a/dts/Bindings/sound/atmel-wm8904.txt b/dts/Bindings/sound/atmel-wm8904.txt deleted file mode 100644 index 8bbe50c884..0000000000 --- a/dts/Bindings/sound/atmel-wm8904.txt +++ /dev/null @@ -1,55 +0,0 @@ -Atmel ASoC driver with wm8904 audio codec complex - -Required properties: - - compatible: "atmel,asoc-wm8904" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources and - sinks are the WM8904's pins, and the jacks on the board: - - WM8904 pins: - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * MICBIAS - - Board connectors: - - * Headphone Jack - * Line In Jack - * Mic - - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8904 audio codec - -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,asoc-wm8904"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8904 @ AT91SAM9N12EK"; - - atmel,audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "IN2L", "Line In Jack", - "IN2R", "Line In Jack", - "Mic", "MICBIAS", - "IN1L", "Mic"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8904>; -}; diff --git a/dts/Bindings/sound/audio-graph-port.yaml b/dts/Bindings/sound/audio-graph-port.yaml index b13c08de50..28b27e7e45 100644 --- a/dts/Bindings/sound/audio-graph-port.yaml +++ b/dts/Bindings/sound/audio-graph-port.yaml @@ -51,7 +51,7 @@ definitions: - $ref: /schemas/types.yaml#/definitions/phandle clocks: description: Indicates system clock - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 system-clock-frequency: $ref: simple-card.yaml#/definitions/system-clock-frequency system-clock-direction-out: diff --git a/dts/Bindings/sound/cirrus,cs35l45.yaml b/dts/Bindings/sound/cirrus,cs35l45.yaml index 4c9acb8d4c..70f6c62aed 100644 --- a/dts/Bindings/sound/cirrus,cs35l45.yaml +++ b/dts/Bindings/sound/cirrus,cs35l45.yaml @@ -25,6 +25,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + '#sound-dai-cells': const: 1 diff --git a/dts/Bindings/sound/cirrus,cs42l43.yaml b/dts/Bindings/sound/cirrus,cs42l43.yaml index 7f9d8c7a63..99a536601c 100644 --- a/dts/Bindings/sound/cirrus,cs42l43.yaml +++ b/dts/Bindings/sound/cirrus,cs42l43.yaml @@ -185,11 +185,12 @@ properties: gpio-ranges: items: - - description: A phandle to the CODEC pinctrl node - minimum: 0 - - const: 0 - - const: 0 - - const: 3 + - items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 patternProperties: "-state$": diff --git a/dts/Bindings/sound/cs4341.txt b/dts/Bindings/sound/cs4341.txt index 12b4aa8ef0..c1d5c8ad1a 100644 --- a/dts/Bindings/sound/cs4341.txt +++ b/dts/Bindings/sound/cs4341.txt @@ -9,7 +9,7 @@ Required properties: number for SPI. For required properties on I2C-bus, please consult -Documentation/devicetree/bindings/i2c/i2c.txt +dtschema schemas/i2c/i2c-controller.yaml For required properties on SPI-bus, please consult Documentation/devicetree/bindings/spi/spi-bus.txt diff --git a/dts/Bindings/sound/everest,es8326.yaml b/dts/Bindings/sound/everest,es8326.yaml index 07781408e7..8c82d47375 100644 --- a/dts/Bindings/sound/everest,es8326.yaml +++ b/dts/Bindings/sound/everest,es8326.yaml @@ -38,6 +38,7 @@ properties: default: 0x0f everest,mic1-src: + deprecated: true $ref: /schemas/types.yaml#/definitions/uint8 description: the value of reg 2A when headset plugged. @@ -46,6 +47,7 @@ properties: default: 0x22 everest,mic2-src: + deprecated: true $ref: /schemas/types.yaml#/definitions/uint8 description: the value of reg 2A when headset unplugged. @@ -87,7 +89,7 @@ properties: 0 means the chip detect jack type again after button released. minimum: 0 maximum: 0x7f - default: 0x45 + default: 0x00 required: - compatible @@ -107,10 +109,8 @@ examples: clocks = <&clks 10>; clock-names = "mclk"; #sound-dai-cells = <0>; - everest,mic1-src = [22]; - everest,mic2-src = [44]; everest,jack-pol = [0e]; everest,interrupt-src = [08]; - everest,interrupt-clk = [45]; + everest,interrupt-clk = [00]; }; }; diff --git a/dts/Bindings/sound/fsl,asrc.txt b/dts/Bindings/sound/fsl,asrc.txt deleted file mode 100644 index 998b4c8a7f..0000000000 --- a/dts/Bindings/sound/fsl,asrc.txt +++ /dev/null @@ -1,80 +0,0 @@ -Freescale Asynchronous Sample Rate Converter (ASRC) Controller - -The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a -signal associated with an input clock into a signal associated with a different -output clock. The driver currently works as a Front End of DPCM with other Back -Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support -three substreams within totally 10 channels. - -Required properties: - - - compatible : Compatible list, should contain one of the following - compatibles: - "fsl,imx35-asrc", - "fsl,imx53-asrc", - "fsl,imx8qm-asrc", - "fsl,imx8qxp-asrc", - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Contains the following entries - "mem" Peripheral access clock to access registers. - "ipg" Peripheral clock to driver module. - "asrck_<0-f>" Clock sources for input and output clock. - "spba" The spba clock is required when ASRC is placed as a - bus slave of the Shared Peripheral Bus and when two - or more bus masters (CPU, DMA or DSP) try to access - it. This property is optional depending on the SoC - design. - - - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends. - - - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. - - - fsl,asrc-clk-map : Defines clock map used in driver. which is required - by imx8qm/imx8qxp platform - <0> - select the map for asrc0 in imx8qm/imx8qxp - <1> - select the map for asrc1 in imx8qm/imx8qxp - -Optional properties: - - - big-endian : If this property is absent, the little endian mode - will be in use as default. Otherwise, the big endian - mode will be in use for all the device registers. - - - fsl,asrc-format : Defines a mutual sample format used by DPCM Back - Ends, which can replace the fsl,asrc-width. - The value is 2 (S16_LE), or 6 (S24_LE). - -Example: - -asrc: asrc@2034000 { - compatible = "fsl,imx53-asrc"; - reg = <0x02034000 0x4000>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 107>, <&clks 107>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 107>, <&clks 0>, <&clks 0>; - clock-names = "mem", "ipg", "asrck0", - "asrck_1", "asrck_2", "asrck_3", "asrck_4", - "asrck_5", "asrck_6", "asrck_7", "asrck_8", - "asrck_9", "asrck_a", "asrck_b", "asrck_c", - "asrck_d", "asrck_e", "asrck_f"; - dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, - <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; - dma-names = "rxa", "rxb", "rxc", - "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; - fsl,asrc-width = <16>; -}; diff --git a/dts/Bindings/sound/fsl,easrc.yaml b/dts/Bindings/sound/fsl,easrc.yaml index a680d7aff2..0782f3f994 100644 --- a/dts/Bindings/sound/fsl,easrc.yaml +++ b/dts/Bindings/sound/fsl,easrc.yaml @@ -51,8 +51,8 @@ properties: - const: ctx3_tx firmware-name: - $ref: /schemas/types.yaml#/definitions/string - const: imx/easrc/easrc-imx8mn.bin + items: + - const: imx/easrc/easrc-imx8mn.bin description: The coefficient table for the filters fsl,asrc-rate: diff --git a/dts/Bindings/sound/fsl,imx-asrc.yaml b/dts/Bindings/sound/fsl,imx-asrc.yaml new file mode 100644 index 0000000000..bfef2fcb75 --- /dev/null +++ b/dts/Bindings/sound/fsl,imx-asrc.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller + +description: + The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of + a signal associated with an input clock into a signal associated with a + different output clock. The driver currently works as a Front End of DPCM + with other Back Ends Audio controller such as ESAI, SSI and SAI. It has + three pairs to support three substreams within totally 10 channels. + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx35-asrc + - fsl,imx53-asrc + - fsl,imx8qm-asrc + - fsl,imx8qxp-asrc + - items: + - enum: + - fsl,imx6sx-asrc + - fsl,imx6ul-asrc + - const: fsl,imx53-asrc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 6 + + dma-names: + items: + - const: rxa + - const: rxb + - const: rxc + - const: txa + - const: txb + - const: txc + + clocks: + maxItems: 19 + + clock-names: + items: + - const: mem + - const: ipg + - const: asrck_0 + - const: asrck_1 + - const: asrck_2 + - const: asrck_3 + - const: asrck_4 + - const: asrck_5 + - const: asrck_6 + - const: asrck_7 + - const: asrck_8 + - const: asrck_9 + - const: asrck_a + - const: asrck_b + - const: asrck_c + - const: asrck_d + - const: asrck_e + - const: asrck_f + - const: spba + + fsl,asrc-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mutual sample rate used by DPCM Back Ends + + fsl,asrc-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mutual sample width used by DPCM Back Ends + enum: [16, 24] + + fsl,asrc-clk-map: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines clock map used in driver + <0> - select the map for asrc0 in imx8qm/imx8qxp + <1> - select the map for asrc1 in imx8qm/imx8qxp + enum: [0, 1] + + big-endian: + type: boolean + description: + If this property is absent, the little endian mode will be in use as + default. Otherwise, the big endian mode will be in use for all the + device registers. + + fsl,asrc-format: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines a mutual sample format used by DPCM Back Ends, which can + replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE). + enum: [2, 6] + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + - fsl,asrc-rate + - fsl,asrc-width + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-asrc + - fsl,imx8qxp-asrc + then: + required: + - fsl,asrc-clk-map + else: + properties: + fsl,asrc-clk-map: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + asrc: asrc@2034000 { + compatible = "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_ASRC_IPG>, + <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + }; diff --git a/dts/Bindings/sound/fsl,micfil.yaml b/dts/Bindings/sound/fsl,micfil.yaml index b7e6058356..c1e9803fc1 100644 --- a/dts/Bindings/sound/fsl,micfil.yaml +++ b/dts/Bindings/sound/fsl,micfil.yaml @@ -15,10 +15,16 @@ description: | properties: compatible: - enum: - - fsl,imx8mm-micfil - - fsl,imx8mp-micfil - - fsl,imx93-micfil + oneOf: + - items: + - enum: + - fsl,imx95-micfil + - const: fsl,imx93-micfil + + - enum: + - fsl,imx8mm-micfil + - fsl,imx8mp-micfil + - fsl,imx93-micfil reg: maxItems: 1 diff --git a/dts/Bindings/sound/fsl,sai.yaml b/dts/Bindings/sound/fsl,sai.yaml index 088c26b001..2456d958ad 100644 --- a/dts/Bindings/sound/fsl,sai.yaml +++ b/dts/Bindings/sound/fsl,sai.yaml @@ -39,6 +39,7 @@ properties: - fsl,imx8qm-sai - fsl,imx8ulp-sai - fsl,imx93-sai + - fsl,imx95-sai - fsl,vf610-sai reg: @@ -75,12 +76,17 @@ properties: - const: pll11k minItems: 4 + power-domains: + maxItems: 1 + dmas: + minItems: 1 items: - description: DMA controller phandle and request line for RX - description: DMA controller phandle and request line for TX dma-names: + minItems: 1 items: - const: rx - const: tx diff --git a/dts/Bindings/sound/infineon,peb2466.yaml b/dts/Bindings/sound/infineon,peb2466.yaml index 66993d378a..5e11ce2c13 100644 --- a/dts/Bindings/sound/infineon,peb2466.yaml +++ b/dts/Bindings/sound/infineon,peb2466.yaml @@ -51,7 +51,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Filters coefficients file to load. If this property is omitted, internal filters are disabled. diff --git a/dts/Bindings/sound/microchip,sama7g5-i2smcc.yaml b/dts/Bindings/sound/microchip,sama7g5-i2smcc.yaml index 651f61c7c2..fb630a1843 100644 --- a/dts/Bindings/sound/microchip,sama7g5-i2smcc.yaml +++ b/dts/Bindings/sound/microchip,sama7g5-i2smcc.yaml @@ -24,9 +24,14 @@ properties: const: 0 compatible: - enum: - - microchip,sam9x60-i2smcc - - microchip,sama7g5-i2smcc + oneOf: + - enum: + - microchip,sam9x60-i2smcc + - microchip,sama7g5-i2smcc + - items: + - enum: + - microchip,sam9x7-i2smcc + - const: microchip,sam9x60-i2smcc reg: maxItems: 1 diff --git a/dts/Bindings/sound/qcom,q6usb.yaml b/dts/Bindings/sound/qcom,q6usb.yaml new file mode 100644 index 0000000000..37161d2aa9 --- /dev/null +++ b/dts/Bindings/sound/qcom,q6usb.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI will communicate the required settings to initialize the + XHCI host controller properly for enabling the offloaded audio stream. + Parameters defined under this node will carry settings, which will be + passed along during the QMI stream enable request and configuration of + the XHCI host controller. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-idx: + description: + Desired XHCI interrupter number to use. Depending on the audio DSP + on the platform, it will operate on a specific XHCI interrupter. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 8 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-idx + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; diff --git a/dts/Bindings/sound/qcom,sm8250.yaml b/dts/Bindings/sound/qcom,sm8250.yaml index 6f41974727..2ab6871e89 100644 --- a/dts/Bindings/sound/qcom,sm8250.yaml +++ b/dts/Bindings/sound/qcom,sm8250.yaml @@ -107,7 +107,7 @@ patternProperties: properties: sound-dai: minItems: 1 - maxItems: 4 + maxItems: 8 required: - link-name diff --git a/dts/Bindings/sound/qcom,wcd938x.yaml b/dts/Bindings/sound/qcom,wcd938x.yaml index adbfa67f88..cf6c3787ad 100644 --- a/dts/Bindings/sound/qcom,wcd938x.yaml +++ b/dts/Bindings/sound/qcom,wcd938x.yaml @@ -15,6 +15,7 @@ description: | allOf: - $ref: dai-common.yaml# + - $ref: qcom,wcd93xx-common.yaml# properties: compatible: @@ -22,92 +23,12 @@ properties: - qcom,wcd9380-codec - qcom,wcd9385-codec - reset-gpios: - description: GPIO spec for reset line to use - maxItems: 1 - us-euro-gpios: description: GPIO spec for swapping gnd and mic segments maxItems: 1 - vdd-buck-supply: - description: A reference to the 1.8V buck supply - - vdd-rxtx-supply: - description: A reference to the 1.8V rx supply - - vdd-io-supply: - description: A reference to the 1.8V I/O supply - - vdd-mic-bias-supply: - description: A reference to the 3.8V mic bias supply - - qcom,tx-device: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: A reference to Soundwire tx device phandle - - qcom,rx-device: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: A reference to Soundwire rx device phandle - - qcom,micbias1-microvolt: - description: micbias1 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias2-microvolt: - description: micbias2 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias3-microvolt: - description: micbias3 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,micbias4-microvolt: - description: micbias4 voltage - minimum: 1800000 - maximum: 2850000 - - qcom,hphl-jack-type-normally-closed: - description: Indicates that HPHL jack switch type is normally closed - type: boolean - - qcom,ground-jack-type-normally-closed: - description: Indicates that Headset Ground switch type is normally closed - type: boolean - - qcom,mbhc-headset-vthreshold-microvolt: - description: Voltage threshold value for headset detection - minimum: 0 - maximum: 2850000 - - qcom,mbhc-headphone-vthreshold-microvolt: - description: Voltage threshold value for headphone detection - minimum: 0 - maximum: 2850000 - - qcom,mbhc-buttons-vthreshold-microvolt: - description: - Array of 8 Voltage threshold values corresponding to headset - button0 - button7 - minItems: 8 - maxItems: 8 - - '#sound-dai-cells': - const: 1 - required: - compatible - - reset-gpios - - qcom,tx-device - - qcom,rx-device - - qcom,micbias1-microvolt - - qcom,micbias2-microvolt - - qcom,micbias3-microvolt - - qcom,micbias4-microvolt - - "#sound-dai-cells" unevaluatedProperties: false diff --git a/dts/Bindings/sound/qcom,wcd939x-sdw.yaml b/dts/Bindings/sound/qcom,wcd939x-sdw.yaml new file mode 100644 index 0000000000..67ed7701b5 --- /dev/null +++ b/dts/Bindings/sound/qcom,wcd939x-sdw.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoundWire devices on WCD9390/WCD9395 + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire devices. This bindings is for the devices. + +properties: + compatible: + const: sdw20217010e00 + + reg: + maxItems: 1 + + qcom,tx-port-mapping: + description: | + Specifies static port mapping between device and host tx ports. + In the order of the device port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + + qcom,rx-port-mapping: + description: | + Specifies static port mapping between device and host rx ports. + In the order of device port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd938x_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5 6>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/dts/Bindings/sound/qcom,wcd939x.yaml b/dts/Bindings/sound/qcom,wcd939x.yaml new file mode 100644 index 0000000000..6e76f6a863 --- /dev/null +++ b/dts/Bindings/sound/qcom,wcd939x.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9380/WCD9385 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire devices. + The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem + accessible over an I2C interface. + The Audio Headphone and Microphone data path between the Codec and the USB-C Mux + subsystems are external to the IC, thus requiring DT port-endpoint graph description + to handle USB-C altmode & orientation switching for Audio Accessory Mode. + +allOf: + - $ref: dai-common.yaml# + - $ref: qcom,wcd93xx-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,wcd9390-codec + - items: + - const: qcom,wcd9395-codec + - const: qcom,wcd9390-codec + + mode-switch: + description: Flag the port as possible handler of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x Codec node to USB MUX subsystems for the + purpose of handling altmode muxing and orientation switching to detect and + enable Audio Accessory Mode. + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + codec { + compatible = "qcom,wcd9390-codec"; + reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>; + #sound-dai-cells = <1>; + qcom,tx-device = <&wcd939x_tx>; + qcom,rx-device = <&wcd939x_rx>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,hphl-jack-type-normally-closed; + qcom,ground-jack-type-normally-closed; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + }; + + /* ... */ + + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd939x_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5 6>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd938x_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +... diff --git a/dts/Bindings/sound/qcom,wcd93xx-common.yaml b/dts/Bindings/sound/qcom,wcd93xx-common.yaml new file mode 100644 index 0000000000..f78ba148ad --- /dev/null +++ b/dts/Bindings/sound/qcom,wcd93xx-common.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Qualcomm WCD93xx Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-rxtx-supply: + description: A reference to the 1.8V rx supply + + vdd-io-supply: + description: A reference to the 1.8V I/O supply + + vdd-mic-bias-supply: + description: A reference to the 3.8V mic bias supply + + qcom,tx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire tx device phandle + + qcom,rx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire rx device phandle + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias4-microvolt: + description: micbias4 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,hphl-jack-type-normally-closed: + description: Indicates that HPHL jack switch type is normally closed + type: boolean + + qcom,ground-jack-type-normally-closed: + description: Indicates that Headset Ground switch type is normally closed + type: boolean + + qcom,mbhc-headset-vthreshold-microvolt: + description: Voltage threshold value for headset detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-headphone-vthreshold-microvolt: + description: Voltage threshold value for headphone detection + minimum: 0 + maximum: 2850000 + + qcom,mbhc-buttons-vthreshold-microvolt: + description: + Array of 8 Voltage threshold values corresponding to headset + button0 - button7 + minItems: 8 + maxItems: 8 + + '#sound-dai-cells': + const: 1 + +required: + - reset-gpios + - qcom,tx-device + - qcom,rx-device + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#sound-dai-cells" + +additionalProperties: true diff --git a/dts/Bindings/sound/qcom,wsa8840.yaml b/dts/Bindings/sound/qcom,wsa8840.yaml index d717017b0f..22798d22d9 100644 --- a/dts/Bindings/sound/qcom,wsa8840.yaml +++ b/dts/Bindings/sound/qcom,wsa8840.yaml @@ -28,6 +28,10 @@ properties: description: Powerdown/Shutdown line to use (pin SD_N) maxItems: 1 + reset-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + '#sound-dai-cells': const: 0 @@ -37,11 +41,16 @@ properties: required: - compatible - reg - - powerdown-gpios - '#sound-dai-cells' - vdd-1p8-supply - vdd-io-supply +oneOf: + - required: + - powerdown-gpios + - required: + - reset-gpios + unevaluatedProperties: false examples: diff --git a/dts/Bindings/sound/realtek,rt1015.yaml b/dts/Bindings/sound/realtek,rt1015.yaml new file mode 100644 index 0000000000..880196081a --- /dev/null +++ b/dts/Bindings/sound/realtek,rt1015.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT1015 Mono Class D Audio Amplifier + +maintainers: + - Jack Yu <jack.yu@realtek.com> + +properties: + compatible: + enum: + - realtek,rt1015 + + reg: + maxItems: 1 + + realtek,power-up-delay-ms: + description: Set a delay time for flush work to be completed, + this vlaue is adjustable depending on platform. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@28 { + compatible = "realtek,rt1015"; + reg = <0x28>; + realtek,power-up-delay-ms = <50>; + }; + }; diff --git a/dts/Bindings/sound/rt1015.txt b/dts/Bindings/sound/rt1015.txt deleted file mode 100644 index e498966d43..0000000000 --- a/dts/Bindings/sound/rt1015.txt +++ /dev/null @@ -1,23 +0,0 @@ -RT1015 Mono Class D Audio Amplifier - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt1015". - -- reg : The I2C address of the device. - -Optional properties: - -- realtek,power-up-delay-ms - Set a delay time for flush work to be completed, - this value is adjustable depending on platform. - -Example: - -rt1015: codec@28 { - compatible = "realtek,rt1015"; - reg = <0x28>; - realtek,power-up-delay-ms = <50>; -}; diff --git a/dts/Bindings/sound/rt5645.txt b/dts/Bindings/sound/rt5645.txt index 41a62fd2ae..c1fa379f5f 100644 --- a/dts/Bindings/sound/rt5645.txt +++ b/dts/Bindings/sound/rt5645.txt @@ -20,6 +20,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -68,6 +73,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; diff --git a/dts/Bindings/sound/samsung,tm2.yaml b/dts/Bindings/sound/samsung,tm2.yaml index 7605925991..cbc7ba3736 100644 --- a/dts/Bindings/sound/samsung,tm2.yaml +++ b/dts/Bindings/sound/samsung,tm2.yaml @@ -25,8 +25,11 @@ properties: description: Phandles to the codecs. $ref: /schemas/types.yaml#/definitions/phandle-array items: - - description: Phandle to the WM5110 audio codec. - - description: Phandle to the HDMI transmitter node. + - items: + - description: Phandle to the WM5110 audio codec. + - items: + - description: Phandle to the HDMI transmitter node. + samsung,audio-routing: description: | diff --git a/dts/Bindings/spi/atmel,at91rm9200-spi.yaml b/dts/Bindings/spi/atmel,at91rm9200-spi.yaml index 58367587bf..32e7c14033 100644 --- a/dts/Bindings/spi/atmel,at91rm9200-spi.yaml +++ b/dts/Bindings/spi/atmel,at91rm9200-spi.yaml @@ -22,7 +22,6 @@ properties: - const: atmel,at91rm9200-spi - items: - const: microchip,sam9x7-spi - - const: microchip,sam9x60-spi - const: atmel,at91rm9200-spi reg: diff --git a/dts/Bindings/spi/samsung,spi.yaml b/dts/Bindings/spi/samsung,spi.yaml index 79da99ca0e..f681372da8 100644 --- a/dts/Bindings/spi/samsung,spi.yaml +++ b/dts/Bindings/spi/samsung,spi.yaml @@ -17,11 +17,13 @@ properties: compatible: oneOf: - enum: + - google,gs101-spi - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 - samsung,s3c6410-spi - samsung,s5pv210-spi # for S5PV210 and S5PC110 - samsung,exynos4210-spi - samsung,exynos5433-spi + - samsung,exynos850-spi - samsung,exynosautov9-spi - tesla,fsd-spi - const: samsung,exynos7-spi @@ -74,8 +76,6 @@ required: - compatible - clocks - clock-names - - dmas - - dma-names - interrupts - reg diff --git a/dts/Bindings/spi/spi-controller.yaml b/dts/Bindings/spi/spi-controller.yaml index 524f6fe8c2..093150c0cb 100644 --- a/dts/Bindings/spi/spi-controller.yaml +++ b/dts/Bindings/spi/spi-controller.yaml @@ -69,6 +69,21 @@ properties: Should be generally avoided and be replaced by spi-cs-high + ACTIVE_HIGH. + fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the RX and TX data FIFOs in bytes. + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the RX data FIFO in bytes. + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Size of the TX data FIFO in bytes. + num-cs: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -116,6 +131,10 @@ patternProperties: - compatible - reg +dependencies: + rx-fifo-depth: [ tx-fifo-depth ] + tx-fifo-depth: [ rx-fifo-depth ] + allOf: - if: not: @@ -129,6 +148,14 @@ allOf: properties: "#address-cells": const: 0 + - not: + required: + - fifo-depth + - rx-fifo-depth + - not: + required: + - fifo-depth + - tx-fifo-depth additionalProperties: true diff --git a/dts/Bindings/spi/spi-fsl-lpspi.yaml b/dts/Bindings/spi/spi-fsl-lpspi.yaml index 727c5346b8..2ff1742447 100644 --- a/dts/Bindings/spi/spi-fsl-lpspi.yaml +++ b/dts/Bindings/spi/spi-fsl-lpspi.yaml @@ -22,6 +22,7 @@ properties: - enum: - fsl,imx8ulp-spi - fsl,imx93-spi + - fsl,imx95-spi - const: fsl,imx7ulp-spi reg: maxItems: 1 diff --git a/dts/Bindings/spi/spi-nxp-fspi.yaml b/dts/Bindings/spi/spi-nxp-fspi.yaml index 7fd5911454..4a5f41bde0 100644 --- a/dts/Bindings/spi/spi-nxp-fspi.yaml +++ b/dts/Bindings/spi/spi-nxp-fspi.yaml @@ -15,12 +15,18 @@ allOf: properties: compatible: - enum: - - nxp,imx8dxl-fspi - - nxp,imx8mm-fspi - - nxp,imx8mp-fspi - - nxp,imx8qxp-fspi - - nxp,lx2160a-fspi + oneOf: + - enum: + - nxp,imx8dxl-fspi + - nxp,imx8mm-fspi + - nxp,imx8mp-fspi + - nxp,imx8qxp-fspi + - nxp,lx2160a-fspi + - items: + - enum: + - nxp,imx93-fspi + - nxp,imx95-fspi + - const: nxp,imx8mm-fspi reg: items: diff --git a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml index a1c9698595..cf07b8f787 100644 --- a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -56,7 +56,7 @@ properties: ranges: true patternProperties: - "^sram@[a-z0-9]+": + "^sram@[a-f0-9]+": $ref: /schemas/sram/sram.yaml# unevaluatedProperties: false diff --git a/dts/Bindings/submitting-patches.rst b/dts/Bindings/submitting-patches.rst index 36a17b250c..a64f21a5f2 100644 --- a/dts/Bindings/submitting-patches.rst +++ b/dts/Bindings/submitting-patches.rst @@ -15,6 +15,11 @@ I. For patch submitters "dt-bindings: <binding dir>: ..." + Few subsystems, like ASoC, media, regulators and SPI, expect reverse order + of the prefixes:: + + "<binding dir>: dt-bindings: ..." + The 80 characters of the subject are precious. It is recommended to not use "Documentation" or "doc" because that is implied. All bindings are docs. Repeating "binding" again should also be avoided. @@ -42,28 +47,18 @@ I. For patch submitters the code implementing the binding. 6) Any compatible strings used in a chip or board DTS file must be - previously documented in the corresponding DT binding text file + previously documented in the corresponding DT binding file in Documentation/devicetree/bindings. This rule applies even if the Linux device driver does not yet match on the compatible string. [ checkpatch will emit warnings if this step is not followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864 ("checkpatch: add DT compatible string documentation checks"). ] - 7) The wildcard "<chip>" may be used in compatible strings, as in - the following example: - - - compatible: Must contain '"nvidia,<chip>-pcie", - "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ... - - As in the above example, the known values of "<chip>" should be - documented if it is used. - - 8) If a documented compatible string is not yet matched by the + 7) If a documented compatible string is not yet matched by the driver, the documentation should also include a compatible - string that is matched by the driver (as in the "nvidia,tegra20-pcie" - example above). + string that is matched by the driver. - 9) Bindings are actively used by multiple projects other than the Linux + 8) Bindings are actively used by multiple projects other than the Linux Kernel, extra care and consideration may need to be taken when making changes to existing bindings. diff --git a/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 9b2272a9ec..6b3aea6d73 100644 --- a/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -21,6 +21,7 @@ properties: - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths clocks: minItems: 1 @@ -50,6 +51,10 @@ properties: nvmem-cell-names: const: calibration + allwinner,sram: + maxItems: 1 + description: phandle to device controlling temperate offset SYS_CFG register + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: @@ -65,6 +70,7 @@ allOf: - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths then: properties: @@ -83,6 +89,17 @@ allOf: minItems: 2 - if: + not: + properties: + compatible: + contains: + const: allwinner,sun50i-h616-ths + + then: + properties: + allwinner,sram: false + + - if: properties: compatible: contains: @@ -101,17 +118,12 @@ allOf: const: 1 - if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-ths - - allwinner,sun8i-r40-ths - - allwinner,sun20i-d1-ths - - allwinner,sun50i-a64-ths - - allwinner,sun50i-a100-ths - - allwinner,sun50i-h5-ths - - allwinner,sun50i-h6-ths + not: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-ths then: required: diff --git a/dts/Bindings/thermal/da9062-thermal.txt b/dts/Bindings/thermal/da9062-thermal.txt deleted file mode 100644 index e241bb5a55..0000000000 --- a/dts/Bindings/thermal/da9062-thermal.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Dialog DA9062/61 TJUNC Thermal Module - -This module is part of the DA9061/DA9062. For more details about entire -DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - -Junction temperature thermal module uses an interrupt signal to identify -high THERMAL_TRIP_HOT temperatures for the PMIC device. - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-thermal", "dlg,da9062-thermal" - "dlg,da9062-thermal" - -Optional properties: - -- polling-delay-passive : Specify the polling period, measured in - milliseconds, between thermal zone device update checks. - -Example: DA9062 - - pmic0: da9062@58 { - thermal { - compatible = "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 onkey driver - - pmic0: da9061@58 { - thermal { - compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; - polling-delay-passive = <3000>; - }; - }; diff --git a/dts/Bindings/thermal/dlg,da9062-thermal.yaml b/dts/Bindings/thermal/dlg,da9062-thermal.yaml new file mode 100644 index 0000000000..e8b2cac410 --- /dev/null +++ b/dts/Bindings/thermal/dlg,da9062-thermal.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9062/61 TJUNC Thermal Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062. For more details about entire + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + Junction temperature thermal module uses an interrupt signal to identify + high THERMAL_TRIP_HOT temperatures for the PMIC device. + +properties: + compatible: + oneOf: + - const: dlg,da9062-thermal + - items: + - const: dlg,da9061-thermal + - const: dlg,da9062-thermal + + polling-delay-passive: + description: + Specify the polling period, measured in milliseconds, between + thermal zone device update checks. + +required: + - compatible + +additionalProperties: false diff --git a/dts/Bindings/thermal/qoriq-thermal.yaml b/dts/Bindings/thermal/qoriq-thermal.yaml index 1457440272..d155d6799d 100644 --- a/dts/Bindings/thermal/qoriq-thermal.yaml +++ b/dts/Bindings/thermal/qoriq-thermal.yaml @@ -33,7 +33,8 @@ properties: description: | The values to be programmed into TTRnCR, as specified by the SoC reference manual. The first cell is TTR0CR, the second is TTR1CR, etc. - maxItems: 4 + minItems: 2 + maxItems: 7 fsl,tmu-calibration: $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/dts/Bindings/thermal/rcar-gen3-thermal.yaml b/dts/Bindings/thermal/rcar-gen3-thermal.yaml index ecf276fd15..6a81cb6e11 100644 --- a/dts/Bindings/thermal/rcar-gen3-thermal.yaml +++ b/dts/Bindings/thermal/rcar-gen3-thermal.yaml @@ -29,6 +29,7 @@ properties: - renesas,r8a779a0-thermal # R-Car V3U - renesas,r8a779f0-thermal # R-Car S4-8 - renesas,r8a779g0-thermal # R-Car V4H + - renesas,r8a779h0-thermal # R-Car V4M reg: true @@ -90,6 +91,7 @@ else: enum: - renesas,r8a779f0-thermal - renesas,r8a779g0-thermal + - renesas,r8a779h0-thermal then: required: - interrupts diff --git a/dts/Bindings/thermal/thermal-zones.yaml b/dts/Bindings/thermal/thermal-zones.yaml index dbd52620d2..68398e7e86 100644 --- a/dts/Bindings/thermal/thermal-zones.yaml +++ b/dts/Bindings/thermal/thermal-zones.yaml @@ -228,8 +228,6 @@ patternProperties: additionalProperties: false required: - - polling-delay - - polling-delay-passive - thermal-sensors - trips diff --git a/dts/Bindings/timer/arm,arch_timer_mmio.yaml b/dts/Bindings/timer/arm,arch_timer_mmio.yaml index 7a4a6ab859..ab8f289931 100644 --- a/dts/Bindings/timer/arm,arch_timer_mmio.yaml +++ b/dts/Bindings/timer/arm,arch_timer_mmio.yaml @@ -60,7 +60,7 @@ properties: be implemented in an always-on power domain." patternProperties: - '^frame@[0-9a-z]*$': + '^frame@[0-9a-f]+$': type: object additionalProperties: false description: A timer node has up to 8 frame sub-nodes, each with the following properties. diff --git a/dts/Bindings/timer/cdns,ttc.yaml b/dts/Bindings/timer/cdns,ttc.yaml index dbba780c9b..da342464d3 100644 --- a/dts/Bindings/timer/cdns,ttc.yaml +++ b/dts/Bindings/timer/cdns,ttc.yaml @@ -32,12 +32,23 @@ properties: description: | Bit width of the timer, necessary if not 16. + "#pwm-cells": + const: 3 + required: - compatible - reg - - interrupts - clocks +allOf: + - if: + not: + required: + - "#pwm-cells" + then: + required: + - interrupts + additionalProperties: false examples: @@ -50,3 +61,12 @@ examples: clocks = <&cpu_clk 3>; timer-width = <32>; }; + + - | + pwm: pwm@f8002000 { + compatible = "cdns,ttc"; + reg = <0xf8002000 0x1000>; + clocks = <&cpu_clk 3>; + timer-width = <32>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/timer/mediatek,mtk-timer.txt b/dts/Bindings/timer/mediatek,mtk-timer.txt deleted file mode 100644 index b3e797e8aa..0000000000 --- a/dts/Bindings/timer/mediatek,mtk-timer.txt +++ /dev/null @@ -1,48 +0,0 @@ -MediaTek Timers ---------------- - -MediaTek SoCs have different timers on different platforms, -- CPUX (ARM/ARM64 System Timer) -- GPT (General Purpose Timer) -- SYST (System Timer) - -The proper timer will be selected automatically by driver. - -Required properties: -- compatible should contain: - For those SoCs that use GPT - * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) - * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) - * "mediatek,mt6582-timer" for MT6582 compatible timers (GPT) - * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) - * "mediatek,mt7623-timer" for MT7623 compatible timers (GPT) - * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT) - * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) - * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) - * "mediatek,mt8516-timer" for MT8516 compatible timers (GPT) - * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) - - For those SoCs that use SYST - * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) - * "mediatek,mt8186-timer" for MT8186 compatible timers (SYST) - * "mediatek,mt8188-timer" for MT8188 compatible timers (SYST) - * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) - * "mediatek,mt8195-timer" for MT8195 compatible timers (SYST) - * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) - * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) - - For those SoCs that use CPUX - * "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX) - * "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX) - -- reg: Should contain location and length for timer register. -- clocks: Should contain system clock. - -Examples: - - timer@10008000 { - compatible = "mediatek,mt6577-timer"; - reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; - clocks = <&system_clk>; - }; diff --git a/dts/Bindings/timer/mediatek,timer.yaml b/dts/Bindings/timer/mediatek,timer.yaml new file mode 100644 index 0000000000..f68fc7050c --- /dev/null +++ b/dts/Bindings/timer/mediatek,timer.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/mediatek,timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC timers + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + MediaTek SoCs have different timers on different platforms, + CPUX (ARM/ARM64 System Timer), GPT (General Purpose Timer) + and SYST (System Timer). + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt6577-timer + - mediatek,mt6765-timer + - mediatek,mt6795-systimer + # GPT Timers + - items: + - enum: + - mediatek,mt2701-timer + - mediatek,mt6580-timer + - mediatek,mt6582-timer + - mediatek,mt6589-timer + - mediatek,mt7623-timer + - mediatek,mt8127-timer + - mediatek,mt8135-timer + - mediatek,mt8173-timer + - mediatek,mt8516-timer + - const: mediatek,mt6577-timer + # SYST Timers + - items: + - enum: + - mediatek,mt7629-timer + - mediatek,mt8183-timer + - mediatek,mt8186-timer + - mediatek,mt8188-timer + - mediatek,mt8192-timer + - mediatek,mt8195-timer + - mediatek,mt8365-systimer + - const: mediatek,mt6765-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Timer clock + - description: RTC or bus clock + + clock-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>; + }; diff --git a/dts/Bindings/timer/mrvl,mmp-timer.yaml b/dts/Bindings/timer/mrvl,mmp-timer.yaml index 1ee4aab695..fe6bc41737 100644 --- a/dts/Bindings/timer/mrvl,mmp-timer.yaml +++ b/dts/Bindings/timer/mrvl,mmp-timer.yaml @@ -9,7 +9,7 @@ title: Marvell MMP Timer maintainers: - Daniel Lezcano <daniel.lezcano@linaro.org> - Thomas Gleixner <tglx@linutronix.de> - - Rob Herring <robh+dt@kernel.org> + - Rob Herring <robh@kernel.org> properties: $nodename: diff --git a/dts/Bindings/timer/nxp,sysctr-timer.yaml b/dts/Bindings/timer/nxp,sysctr-timer.yaml index 2b9653dafa..891cca0095 100644 --- a/dts/Bindings/timer/nxp,sysctr-timer.yaml +++ b/dts/Bindings/timer/nxp,sysctr-timer.yaml @@ -18,7 +18,9 @@ description: | properties: compatible: - const: nxp,sysctr-timer + enum: + - nxp,imx95-sysctr-timer + - nxp,sysctr-timer reg: maxItems: 1 diff --git a/dts/Bindings/timer/ralink,cevt-systick.yaml b/dts/Bindings/timer/ralink,cevt-systick.yaml new file mode 100644 index 0000000000..59d97feddf --- /dev/null +++ b/dts/Bindings/timer/ralink,cevt-systick.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System tick counter present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,cevt-systick + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + systick@d00 { + compatible = "ralink,cevt-systick"; + reg = <0xd00 0x10>; + + interrupt-parent = <&cpuintc>; + interrupts = <7>; + }; +... diff --git a/dts/Bindings/timer/renesas,ostm.yaml b/dts/Bindings/timer/renesas,ostm.yaml index 7207929e5c..8b06a68176 100644 --- a/dts/Bindings/timer/renesas,ostm.yaml +++ b/dts/Bindings/timer/renesas,ostm.yaml @@ -23,7 +23,7 @@ properties: - enum: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M - - renesas,r9a07g043-ostm # RZ/G2UL + - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic diff --git a/dts/Bindings/timer/renesas,tmu.yaml b/dts/Bindings/timer/renesas,tmu.yaml index a67e427a9e..84bbe15028 100644 --- a/dts/Bindings/timer/renesas,tmu.yaml +++ b/dts/Bindings/timer/renesas,tmu.yaml @@ -46,7 +46,19 @@ properties: interrupts: minItems: 2 - maxItems: 3 + items: + - description: Underflow interrupt, channel 0 + - description: Underflow interrupt, channel 1 + - description: Underflow interrupt, channel 2 + - description: Input capture interrupt, channel 2 + + interrupt-names: + minItems: 2 + items: + - const: tuni0 + - const: tuni1 + - const: tuni2 + - const: ticpi2 clocks: maxItems: 1 @@ -100,7 +112,9 @@ examples: reg = <0xffd80000 0x30>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/dts/Bindings/timer/samsung,exynos4210-mct.yaml b/dts/Bindings/timer/samsung,exynos4210-mct.yaml index 829bd2227f..774b7992a0 100644 --- a/dts/Bindings/timer/samsung,exynos4210-mct.yaml +++ b/dts/Bindings/timer/samsung,exynos4210-mct.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos3250-mct - samsung,exynos5250-mct - samsung,exynos5260-mct @@ -127,6 +128,7 @@ allOf: contains: enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos5260-mct - samsung,exynos5420-mct - samsung,exynos5433-mct diff --git a/dts/Bindings/tpm/tcg,tpm_tis-spi.yaml b/dts/Bindings/tpm/tcg,tpm_tis-spi.yaml index c3413b47ac..6cb2de7cb5 100644 --- a/dts/Bindings/tpm/tcg,tpm_tis-spi.yaml +++ b/dts/Bindings/tpm/tcg,tpm_tis-spi.yaml @@ -20,6 +20,7 @@ properties: compatible: items: - enum: + - atmel,attpm20p - infineon,slb9670 - st,st33htpm-spi - st,st33zp24-spi diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml index 79dcd92c4a..e07be7bf83 100644 --- a/dts/Bindings/trivial-devices.yaml +++ b/dts/Bindings/trivial-devices.yaml @@ -28,6 +28,7 @@ properties: compatible: items: + # Entries are sorted alphanumerically by the compatible - enum: # Acbel fsg032 power supply - acbel,fsg032 @@ -47,14 +48,16 @@ properties: - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core + # Temperature monitoring of Astera Labs PT5161L PCIe retimer + - asteralabs,pt5161l # i2c serial eeprom (24cxx) - at,24c08 + # i2c h/w elliptic curve crypto module + - atmel,atecc508a # ATSHA204 - i2c h/w symmetric crypto module - atmel,atsha204 # ATSHA204A - i2c h/w symmetric crypto module - atmel,atsha204a - # i2c h/w elliptic curve crypto module - - atmel,atecc508a # BPA-RS600: Power Supply - blutek,bpa-rs600 # Bosch Sensortec pressure, temperature, humididty and VOC sensor @@ -115,20 +118,6 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 - # Monolithic Power Systems Inc. multi-phase controller mp2856 - - mps,mp2856 - # Monolithic Power Systems Inc. multi-phase controller mp2857 - - mps,mp2857 - # Monolithic Power Systems Inc. multi-phase controller mp2888 - - mps,mp2888 - # Monolithic Power Systems Inc. multi-phase controller mp2971 - - mps,mp2971 - # Monolithic Power Systems Inc. multi-phase controller mp2973 - - mps,mp2973 - # Monolithic Power Systems Inc. multi-phase controller mp2975 - - mps,mp2975 - # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 - - mps,mp5990 # Honeywell Humidicon HIH-6130 humidity/temperature sensor - honeywell,hi6130 # IBM Common Form Factor Power Supply Versions (all versions) @@ -137,16 +126,10 @@ properties: - ibm,cffps1 # IBM Common Form Factor Power Supply Versions 2 - ibm,cffps2 + # Infineon barometric pressure and temperature sensor + - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 - # Infineon IR38060 Voltage Regulator - - infineon,ir38060 - # Infineon IR38064 Voltage Regulator - - infineon,ir38064 - # Infineon IR38164 Voltage Regulator - - infineon,ir38164 - # Infineon IR38263 Voltage Regulator - - infineon,ir38263 # Infineon IRPS5401 Voltage Regulator (PMIC) - infineon,irps5401 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor @@ -195,6 +178,8 @@ properties: - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 + # 3-Channel Remote Temperature Sensor + - maxim,max31730 # 10-bit 10 kOhm linear programmable voltage divider - maxim,max5481 # 10-bit 50 kOhm linear programmable voltage divider @@ -207,8 +192,6 @@ properties: - maxim,max6621 # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface - maxim,max6625 - # 3-Channel Remote Temperature Sensor - - maxim,max31730 # mCube 3-axis 8-bit digital accelerometer - mcube,mc3230 # Measurement Specialities I2C temperature and humidity sensor @@ -239,8 +222,6 @@ properties: - memsic,mxc6655 # Menlo on-board CPLD trivial SPI device - menlo,m53cpld - # Micron SPI NOR Authenta - - micron,spi-authenta # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit @@ -257,40 +238,58 @@ properties: - microchip,mcp3427 # Microchip differential I2C ADC, 4 Channel, 16 bit - microchip,mcp3428 - # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4017-502 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4017-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4017-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4017-104 # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4018-502 + - microchip,mcp4017-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4017-503 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4018-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4018-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4018-104 # Microchip 7-bit Single I2C Digital POT (5k) - - microchip,mcp4019-502 + - microchip,mcp4018-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4018-503 # Microchip 7-bit Single I2C Digital POT (10k) - microchip,mcp4019-103 - # Microchip 7-bit Single I2C Digital POT (50k) - - microchip,mcp4019-503 # Microchip 7-bit Single I2C Digital POT (100k) - microchip,mcp4019-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4019-502 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4019-503 # PWM Fan Speed Controller With Fan Fault Detection - microchip,tc654 # PWM Fan Speed Controller With Fan Fault Detection - microchip,tc655 + # Micron SPI NOR Authenta + - micron,spi-authenta # MiraMEMS DA226 2-axis 14-bit digital accelerometer - miramems,da226 # MiraMEMS DA280 3-axis 14-bit digital accelerometer - miramems,da280 # MiraMEMS DA311 3-axis 12-bit digital accelerometer - miramems,da311 + # Monolithic Power Systems Inc. multi-phase controller mp2856 + - mps,mp2856 + # Monolithic Power Systems Inc. multi-phase controller mp2857 + - mps,mp2857 + # Monolithic Power Systems Inc. multi-phase controller mp2888 + - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 + # Monolithic Power Systems Inc. multi-phase controller mp2975 + - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 + - mps,mp5990 + # Monolithic Power Systems Inc. synchronous step-down converter mpq8785 + - mps,mpq8785 # Temperature sensor with integrated fan control - national,lm63 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor @@ -321,12 +320,12 @@ properties: - samsung,exynos-sataphy-i2c # Semtech sx1301 baseband processor - semtech,sx1301 - # Sensirion low power multi-pixel gas sensor with I2C interface - - sensirion,sgpc3 # Sensirion multi-pixel gas sensor with I2C interface - sensirion,sgp30 # Sensirion gas sensor with I2C interface - sensirion,sgp40 + # Sensirion low power multi-pixel gas sensor with I2C interface + - sensirion,sgpc3 # Sensirion temperature & humidity sensor with I2C interface - sensirion,sht4x # Sensortek 3 axis accelerometer @@ -372,8 +371,6 @@ properties: - ti,lm74 # Temperature sensor with integrated fan control - ti,lm96000 - # I2C Touch-Screen Controller - - ti,tsc2003 # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface - ti,tmp103 # Thermometer with SPI interface @@ -395,10 +392,12 @@ properties: - ti,tps544b25 - ti,tps544c20 - ti,tps544c25 - # Winbond/Nuvoton H/W Monitor - - winbond,w83793 + # I2C Touch-Screen Controller + - ti,tsc2003 # Vicor Corporation Digital Supervisor - vicor,pli1209bc + # Winbond/Nuvoton H/W Monitor + - winbond,w83793 required: - compatible diff --git a/dts/Bindings/ufs/qcom,ufs.yaml b/dts/Bindings/ufs/qcom,ufs.yaml index 10c146424b..cd3680dc00 100644 --- a/dts/Bindings/ufs/qcom,ufs.yaml +++ b/dts/Bindings/ufs/qcom,ufs.yaml @@ -27,10 +27,13 @@ properties: - qcom,msm8996-ufshc - qcom,msm8998-ufshc - qcom,sa8775p-ufshc + - qcom,sc7180-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc - qcom,sm6115-ufshc + - qcom,sm6125-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -42,11 +45,11 @@ properties: - const: jedec,ufs-2.0 clocks: - minItems: 8 + minItems: 7 maxItems: 11 clock-names: - minItems: 8 + minItems: 7 maxItems: 11 dma-coherent: true @@ -117,9 +120,35 @@ allOf: compatible: contains: enum: + - qcom,sc7180-ufshc + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: - qcom,msm8998-ufshc - qcom,sa8775p-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sm8250-ufshc - qcom,sm8350-ufshc @@ -215,6 +244,7 @@ allOf: contains: enum: - qcom,sm6115-ufshc + - qcom,sm6125-ufshc then: properties: clocks: @@ -248,7 +278,7 @@ allOf: reg: maxItems: 1 clocks: - minItems: 8 + minItems: 7 maxItems: 8 else: properties: @@ -256,7 +286,7 @@ allOf: minItems: 1 maxItems: 2 clocks: - minItems: 8 + minItems: 7 maxItems: 11 unevaluatedProperties: false diff --git a/dts/Bindings/usb/analogix,anx7411.yaml b/dts/Bindings/usb/analogix,anx7411.yaml index e4d893369d..3f5857aee3 100644 --- a/dts/Bindings/usb/analogix,anx7411.yaml +++ b/dts/Bindings/usb/analogix,anx7411.yaml @@ -23,24 +23,11 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml - unevaluatedProperties: false - - description: - Properties for usb c connector. properties: compatible: const: usb-c-connector - power-role: true - - data-role: true - - try-power-role: true - - required: - - compatible - required: - compatible - reg diff --git a/dts/Bindings/usb/ci-hdrc-usb2.yaml b/dts/Bindings/usb/ci-hdrc-usb2.yaml index b7e664f739..3b56e0edb1 100644 --- a/dts/Bindings/usb/ci-hdrc-usb2.yaml +++ b/dts/Bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/dts/Bindings/usb/cypress,hx3.yaml b/dts/Bindings/usb/cypress,hx3.yaml index 47add0d85f..28096619a8 100644 --- a/dts/Bindings/usb/cypress,hx3.yaml +++ b/dts/Bindings/usb/cypress,hx3.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/cypress,hx3.yaml# diff --git a/dts/Bindings/usb/fcs,fsa4480.yaml b/dts/Bindings/usb/fcs,fsa4480.yaml index f9410eb76a..8b25b9a01c 100644 --- a/dts/Bindings/usb/fcs,fsa4480.yaml +++ b/dts/Bindings/usb/fcs,fsa4480.yaml @@ -27,13 +27,8 @@ properties: vcc-supply: description: power supply (2.7V-5.5V) - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/$defs/port-base @@ -79,6 +74,9 @@ required: - reg - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml index 87986c45be..2ed178f16a 100644 --- a/dts/Bindings/usb/generic-ehci.yaml +++ b/dts/Bindings/usb/generic-ehci.yaml @@ -77,6 +77,7 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,ac5-ehci - marvell,armada-3700-ehci - marvell,orion-ehci - nuvoton,npcm750-ehci diff --git a/dts/Bindings/usb/gpio-sbu-mux.yaml b/dts/Bindings/usb/gpio-sbu-mux.yaml index d3b2b666ec..88e1607cf0 100644 --- a/dts/Bindings/usb/gpio-sbu-mux.yaml +++ b/dts/Bindings/usb/gpio-sbu-mux.yaml @@ -33,13 +33,8 @@ properties: vcc-supply: description: power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/properties/port @@ -54,6 +49,9 @@ required: - orientation-switch - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/dts/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml new file mode 100644 index 0000000000..f301169439 --- /dev/null +++ b/dts/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Hi3798MV200 DWC3 USB SoC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +properties: + compatible: + const: hisilicon,hi3798mv200-dwc3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + items: + - description: Controller bus clock + - description: Controller suspend clock + - description: Controller reference clock + - description: Controller gm clock + - description: Controller gs clock + - description: Controller utmi clock + - description: Controller pipe clock + + clock-names: + items: + - const: bus + - const: suspend + - const: ref + - const: gm + - const: gs + - const: utmi + - const: pipe + + resets: + maxItems: 1 + + reset-names: + const: soft + +patternProperties: + '^usb@[0-9a-f]+$': + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb { + compatible = "hisilicon,hi3798mv200-dwc3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>, + <&clk_gm>, + <&clk_gs>, + <&clk_utmi>, + <&clk_pipe>; + clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + + usb@98a0000 { + compatible = "snps,dwc3"; + reg = <0x98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>; + clock-names = "bus_early", "suspend", "ref"; + phys = <&usb2_phy1_port2>, <&combphy0 0>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "host"; + }; + }; diff --git a/dts/Bindings/usb/ite,it5205.yaml b/dts/Bindings/usb/ite,it5205.yaml new file mode 100644 index 0000000000..36ec4251b5 --- /dev/null +++ b/dts/Bindings/usb/ite,it5205.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ite,it5205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT5202 Type-C USB Alternate Mode Passive MUX + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Tianping Fang <tianping.fang@mediatek.com> + +properties: + compatible: + const: ite,it5205 + + reg: + maxItems: 1 + + vcc-supply: + description: Power supply for VCC pin (3.3V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ite,ovp-enable: + description: Enable Over Voltage Protection functionality + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the IT5205 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/mediatek,mtu3.yaml b/dts/Bindings/usb/mediatek,mtu3.yaml index a59d91243a..d4e187c78a 100644 --- a/dts/Bindings/usb/mediatek,mtu3.yaml +++ b/dts/Bindings/usb/mediatek,mtu3.yaml @@ -185,7 +185,10 @@ properties: 2 - used by mt2712 etc, revision 2 with following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/dts/Bindings/usb/microchip,usb5744.yaml b/dts/Bindings/usb/microchip,usb5744.yaml index 445183d9d6..e2a72deae7 100644 --- a/dts/Bindings/usb/microchip,usb5744.yaml +++ b/dts/Bindings/usb/microchip,usb5744.yaml @@ -72,8 +72,6 @@ allOf: i2c-bus: false else: $ref: /schemas/usb/usb-device.yaml - required: - - peer-hub additionalProperties: false diff --git a/dts/Bindings/usb/nxp,ptn36502.yaml b/dts/Bindings/usb/nxp,ptn36502.yaml index eee548ac1a..d805dde807 100644 --- a/dts/Bindings/usb/nxp,ptn36502.yaml +++ b/dts/Bindings/usb/nxp,ptn36502.yaml @@ -20,13 +20,8 @@ properties: vdd18-supply: description: Power supply for VDD18 pin - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -49,6 +44,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/usb/nxp,ptn5110.yaml b/dts/Bindings/usb/nxp,ptn5110.yaml index eaedb4cc6b..65a8632b4d 100644 --- a/dts/Bindings/usb/nxp,ptn5110.yaml +++ b/dts/Bindings/usb/nxp,ptn5110.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nxp,ptn5110 + items: + - const: nxp,ptn5110 + - const: tcpci reg: maxItems: 1 @@ -41,7 +43,7 @@ examples: #size-cells = <0>; tcpci@50 { - compatible = "nxp,ptn5110"; + compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/Bindings/usb/onnn,nb7vpq904m.yaml b/dts/Bindings/usb/onnn,nb7vpq904m.yaml index c0201da002..589914d22b 100644 --- a/dts/Bindings/usb/onnn,nb7vpq904m.yaml +++ b/dts/Bindings/usb/onnn,nb7vpq904m.yaml @@ -21,14 +21,8 @@ properties: description: power supply (1.8V) enable-gpios: true - - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -95,6 +89,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml index 63d150b216..38a3404ec7 100644 --- a/dts/Bindings/usb/qcom,dwc3.yaml +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -102,7 +102,7 @@ properties: description: | Different types of interrupts are used based on HS PHY used on target: - pwr_event: Used for wakeup based on other power events. - - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is hs_phy_irq which is not triggered by default and its functionality is mutually exclusive to that of {dp/dm}_hs_phy_irq and qusb2_phy_irq. diff --git a/dts/Bindings/usb/qcom,pmic-typec.yaml b/dts/Bindings/usb/qcom,pmic-typec.yaml index 55df3129a0..d9694570c4 100644 --- a/dts/Bindings/usb/qcom,pmic-typec.yaml +++ b/dts/Bindings/usb/qcom,pmic-typec.yaml @@ -14,8 +14,19 @@ description: properties: compatible: - enum: - - qcom,pm8150b-typec + oneOf: + - enum: + - qcom,pmi632-typec + - qcom,pm8150b-typec + - items: + - enum: + - qcom,pm6150-typec + - const: qcom,pm8150b-typec + - items: + - enum: + - qcom,pm4125-typec + - const: qcom,pmi632-typec + connector: type: object @@ -24,9 +35,11 @@ properties: reg: description: Type-C port and pdphy SPMI register base offsets + minItems: 1 maxItems: 2 interrupts: + minItems: 8 items: - description: Type-C CC attach notification, VBUS error, tCCDebounce done - description: Type-C VCONN powered @@ -46,6 +59,7 @@ properties: - description: Power Domain Fast Role Swap event interrupt-names: + minItems: 8 items: - const: or-rid-detect-change - const: vpd-detect @@ -81,7 +95,33 @@ required: - interrupts - interrupt-names - vdd-vbus-supply - - vdd-pdphy-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi632-typec + then: + properties: + reg: + maxItems: 1 + interrupts: + maxItems: 8 + interrupt-names: + maxItems: 8 + vdd-pdphy-supply: false + else: + properties: + reg: + maxItems: 2 + interrupts: + minItems: 16 + interrupt-names: + maxItems: 16 + required: + - vdd-pdphy-supply additionalProperties: false diff --git a/dts/Bindings/usb/qcom,wcd939x-usbss.yaml b/dts/Bindings/usb/qcom,wcd939x-usbss.yaml index 7ddfd3313a..96346723f3 100644 --- a/dts/Bindings/usb/qcom,wcd939x-usbss.yaml +++ b/dts/Bindings/usb/qcom,wcd939x-usbss.yaml @@ -35,13 +35,8 @@ properties: vdd-supply: description: USBSS VDD power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -63,6 +58,9 @@ required: - reg - ports +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/usb/realtek,rts5411.yaml b/dts/Bindings/usb/realtek,rts5411.yaml index f0784d2e86..0874fc21f6 100644 --- a/dts/Bindings/usb/realtek,rts5411.yaml +++ b/dts/Bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + '^.*@[1-4]$': + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,13 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + #address-cells = <1>; + #size-cells = <0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +101,17 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* Type-A connector on port 4 */ + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&usb_a0_ss>; + }; + }; + }; }; }; diff --git a/dts/Bindings/usb/ti,am62-usb.yaml b/dts/Bindings/usb/ti,am62-usb.yaml index fec5651f56..f6e6d084d1 100644 --- a/dts/Bindings/usb/ti,am62-usb.yaml +++ b/dts/Bindings/usb/ti,am62-usb.yaml @@ -14,7 +14,10 @@ properties: const: ti,am62-usb reg: - maxItems: 1 + minItems: 1 + items: + - description: USB CFG register space + - description: USB PHY2 register space ranges: true @@ -82,7 +85,8 @@ examples: usbss1: usb@f910000 { compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; clocks = <&k3_clks 162 3>; clock-names = "ref"; ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; diff --git a/dts/Bindings/usb/ti,usb8020b.yaml b/dts/Bindings/usb/ti,usb8020b.yaml new file mode 100644 index 0000000000..8ef117793e --- /dev/null +++ b/dts/Bindings/usb/ti,usb8020b.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8020B USB 3.0 hub controller + +maintainers: + - Macpaul Lin <macpaul.lin@mediatek.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8025 + - usb451,8027 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + }; diff --git a/dts/Bindings/usb/usb-nop-xceiv.yaml b/dts/Bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa..9b3ea23654 100644 --- a/dts/Bindings/usb/usb-nop-xceiv.yaml +++ b/dts/Bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; diff --git a/dts/Bindings/usb/usb-switch.yaml b/dts/Bindings/usb/usb-switch.yaml new file mode 100644 index 0000000000..da76118e73 --- /dev/null +++ b/dts/Bindings/usb/usb-switch.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Common Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Common properties for devices handling USB mode and orientation switching. + +properties: + mode-switch: + description: Possible handler of altmode switching + type: boolean + + orientation-switch: + description: Possible handler of orientation switching + type: boolean + + retimer-switch: + description: Possible handler of SuperSpeed signals retiming + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/dts/Bindings/usb/usb.yaml b/dts/Bindings/usb/usb.yaml index 326b14f05d..1761b7aa92 100644 --- a/dts/Bindings/usb/usb.yaml +++ b/dts/Bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml index 1a0dc04f1d..b97d298b3e 100644 --- a/dts/Bindings/vendor-prefixes.yaml +++ b/dts/Bindings/vendor-prefixes.yaml @@ -39,6 +39,8 @@ patternProperties: description: ShenZhen Asia Better Technology Ltd. "^acbel,.*": description: Acbel Polytech Inc. + "^acelink,.*": + description: Acelink Technology Co., Ltd. "^acer,.*": description: Acer Inc. "^acme,.*": @@ -61,6 +63,8 @@ patternProperties: description: Analog Devices, Inc. "^adieng,.*": description: ADI Engineering, Inc. + "^admatec,.*": + description: admatec GmbH "^advantech,.*": description: Advantech Corporation "^aeroflexgaisler,.*": @@ -107,6 +111,8 @@ patternProperties: description: Amlogic, Inc. "^ampere,.*": description: Ampere Computing LLC + "^amphenol,.*": + description: Amphenol Advanced Sensors "^ampire,.*": description: Ampire Co., Ltd. "^ams,.*": @@ -159,6 +165,8 @@ patternProperties: description: ASPEED Technology Inc. "^asrock,.*": description: ASRock Inc. + "^asteralabs,.*": + description: Astera Labs, Inc. "^asus,.*": description: AsusTek Computer Inc. "^atheros,.*": @@ -230,6 +238,8 @@ patternProperties: description: ByteDance Ltd. "^calamp,.*": description: CalAmp Corp. + "^calao,.*": + description: CALAO Systems SAS "^calaosystems,.*": description: CALAO Systems SAS "^calxeda,.*": @@ -478,6 +488,9 @@ patternProperties: description: EZchip Semiconductor "^facebook,.*": description: Facebook + "^fairchild,.*": + description: Fairchild Semiconductor (deprecated, use 'onnn') + deprecated: true "^fairphone,.*": description: Fairphone B.V. "^faraday,.*": @@ -500,6 +513,8 @@ patternProperties: description: FocalTech Systems Co.,Ltd "^forlinx,.*": description: Baoding Forlinx Embedded Technology Co., Ltd. + "^freebox,.*": + description: Freebox SAS "^freecom,.*": description: Freecom Gmbh "^frida,.*": @@ -542,6 +557,8 @@ patternProperties: description: Giantec Semiconductor, Inc. "^giantplus,.*": description: Giantplus Technology Co., Ltd. + "^glinet,.*": + description: GL Intelligence, Inc. "^globalscale,.*": description: Globalscale Technologies, Inc. "^globaltop,.*": @@ -601,6 +618,8 @@ patternProperties: description: Honestar Technologies Co., Ltd. "^honeywell,.*": description: Honeywell + "^hoperf,.*": + description: Shenzhen Hope Microelectronics Co., Ltd. "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -631,12 +650,16 @@ patternProperties: description: Hyundai Technology "^i2se,.*": description: I2SE GmbH + "^IBM,.*": + description: International Business Machines (IBM) "^ibm,.*": description: International Business Machines (IBM) "^icplus,.*": description: IC Plus Corp. "^idt,.*": description: Integrated Device Technologies, Inc. + "^iei,.*": + description: IEI Integration Corp. "^ifi,.*": description: Ingenieurburo Fur Ic-Technologie (I/F/I) "^ilitek,.*": @@ -719,6 +742,8 @@ patternProperties: description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. + "^jide,.*": + description: Jide Tech "^joz,.*": description: JOZ BV "^kam,.*": @@ -821,6 +846,8 @@ patternProperties: description: LSI Corp. (LSI Logic) "^lunzn,.*": description: Shenzhen Lunzn Technology Co., Ltd. + "^luxul,.*": + description: Lagrand | AV "^lwn,.*": description: Liebherr-Werk Nenzing GmbH "^lxa,.*": @@ -899,6 +926,9 @@ patternProperties: description: Miniand Tech "^minix,.*": description: MINIX Technology Ltd. + "^mips,.*": + description: MIPS Technology (deprecated, use 'mti' or 'img') + deprecated: true "^miramems,.*": description: MiraMEMS Sensing Technology Co., Ltd. "^mitsubishi,.*": @@ -911,6 +941,8 @@ patternProperties: description: Miyoo "^mntre,.*": description: MNT Research GmbH + "^mobileye,.*": + description: Mobileye Vision Technologies Ltd. "^modtronix,.*": description: Modtronix Engineering "^moortec,.*": @@ -993,6 +1025,9 @@ patternProperties: description: Novatek "^novtech,.*": description: NovTech, Inc. + "^numonyx,.*": + description: Numonyx (deprecated, use micron) + deprecated: true "^nutsboard,.*": description: NutsBoard "^nuvoton,.*": @@ -1297,6 +1332,8 @@ patternProperties: description: Skyworks Solutions, Inc. "^smartlabs,.*": description: SmartLabs LLC + "^smartrg,.*": + description: SmartRG, Inc. "^smi,.*": description: Silicon Motion Technology Corporation "^smsc,.*": @@ -1484,6 +1521,8 @@ patternProperties: description: Ufi Space Co., Ltd. "^ugoos,.*": description: Ugoos Industrial Co., Ltd. + "^uni-t,.*": + description: Uni-Trend Technology (China) Co., Ltd. "^uniwest,.*": description: United Western Technologies Corp (UniWest) "^upisemi,.*": @@ -1534,10 +1573,16 @@ patternProperties: description: VoCore Studio "^voipac,.*": description: Voipac Technologies s.r.o. + "^voltafield,.*": + description: Voltafield Technology Corp. "^vot,.*": description: Vision Optical Technology Co., Ltd. + "^vscom,.*": + description: VS Visions Systems GmbH "^vxt,.*": description: VXT Ltd + "^wacom,.*": + description: Wacom "^wanchanglong,.*": description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd. "^wand,.*": diff --git a/dts/Bindings/w1/w1-uart.yaml b/dts/Bindings/w1/w1-uart.yaml new file mode 100644 index 0000000000..bd7c62d780 --- /dev/null +++ b/dts/Bindings/w1/w1-uart.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/w1-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UART 1-Wire Bus + +maintainers: + - Christoph Winklhofer <cj.winklhofer@gmail.com> + +description: | + UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus + to create the 1-Wire timing patterns. + + The UART peripheral must support full-duplex and operate in open-drain + mode. The timing patterns are generated by a specific combination of + baud-rate and transmitted byte, which corresponds to a 1-Wire read bit, + write bit or reset pulse. + + The default baud-rate for reset and presence detection is 9600 and for + a 1-Wire read or write operation 115200. In case the actual baud-rate + is different from the requested one, the transmitted byte is adapted + to generate the 1-Wire timing patterns. + + https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html + +properties: + compatible: + const: w1-uart + + reset-bps: + default: 9600 + description: + The baud rate for the 1-Wire reset and presence detect. + + write-0-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-0 cycle. + + write-1-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-1 and read cycle. + +required: + - compatible + +additionalProperties: + type: object + +examples: + - | + serial { + onewire { + compatible = "w1-uart"; + }; + }; diff --git a/dts/Bindings/watchdog/arm,sp805.yaml b/dts/Bindings/watchdog/arm,sp805.yaml index 7aea255b30..bd7c09ed19 100644 --- a/dts/Bindings/watchdog/arm,sp805.yaml +++ b/dts/Bindings/watchdog/arm,sp805.yaml @@ -50,6 +50,10 @@ properties: - const: wdog_clk - const: apb_pclk + resets: + maxItems: 1 + description: WDOGRESn input reset signal for sp805 module. + required: - compatible - reg @@ -67,4 +71,5 @@ examples: interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdt_clk>, <&apb_pclk>; clock-names = "wdog_clk", "apb_pclk"; + resets = <&wdt_rst>; }; diff --git a/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml b/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml index 816f85ee2c..cdf87db361 100644 --- a/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml +++ b/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml @@ -14,10 +14,14 @@ allOf: properties: compatible: - enum: - - atmel,sama5d4-wdt - - microchip,sam9x60-wdt - - microchip,sama7g5-wdt + oneOf: + - enum: + - atmel,sama5d4-wdt + - microchip,sam9x60-wdt + - microchip,sama7g5-wdt + - items: + - const: microchip,sam9x7-wdt + - const: microchip,sam9x60-wdt reg: maxItems: 1 diff --git a/dts/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/dts/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt deleted file mode 100644 index f801d71de1..0000000000 --- a/dts/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt +++ /dev/null @@ -1,18 +0,0 @@ -BCM2835 Watchdog timer - -Required properties: - -- compatible : should be "brcm,bcm2835-pm-wdt" -- reg : Specifies base physical address and size of the registers. - -Optional properties: - -- timeout-sec : Contains the watchdog timeout in seconds - -Example: - -watchdog { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; - timeout-sec = <10>; -}; diff --git a/dts/Bindings/watchdog/qcom-wdt.yaml b/dts/Bindings/watchdog/qcom-wdt.yaml index a4f35c598c..47587971fb 100644 --- a/dts/Bindings/watchdog/qcom-wdt.yaml +++ b/dts/Bindings/watchdog/qcom-wdt.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer maintainers: - - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + - Rajendra Nayak <quic_rjendra@quicinc.com> properties: $nodename: diff --git a/dts/Bindings/watchdog/renesas,wdt.yaml b/dts/Bindings/watchdog/renesas,wdt.yaml index 951a7d5413..ffb17add49 100644 --- a/dts/Bindings/watchdog/renesas,wdt.yaml +++ b/dts/Bindings/watchdog/renesas,wdt.yaml @@ -71,6 +71,7 @@ properties: - renesas,r8a779a0-wdt # R-Car V3U - renesas,r8a779f0-wdt # R-Car S4-8 - renesas,r8a779g0-wdt # R-Car V4H + - renesas,r8a779h0-wdt # R-Car V4M - const: renesas,rcar-gen4-wdt # R-Car Gen4 reg: diff --git a/dts/Bindings/watchdog/sprd,sp9860-wdt.yaml b/dts/Bindings/watchdog/sprd,sp9860-wdt.yaml new file mode 100644 index 0000000000..730d9a3a3c --- /dev/null +++ b/dts/Bindings/watchdog/sprd,sp9860-wdt.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/sprd,sp9860-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SP9860 watchdog timer + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: sprd,sp9860-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: enable + - const: rtc_enable + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - timeout-sec + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sprd,sc9860-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_gate CLK_APCPU_WDG_EB>, <&aon_gate CLK_AP_WDG_RTC_EB>; + clock-names = "enable", "rtc_enable"; + timeout-sec = <12>; + }; + }; +... diff --git a/dts/Bindings/watchdog/sprd-wdt.txt b/dts/Bindings/watchdog/sprd-wdt.txt deleted file mode 100644 index aeaf3e0caf..0000000000 --- a/dts/Bindings/watchdog/sprd-wdt.txt +++ /dev/null @@ -1,19 +0,0 @@ -Spreadtrum SoCs Watchdog timer - -Required properties: -- compatible : Should be "sprd,sp9860-wdt". -- reg : Specifies base physical address and size of the registers. -- interrupts : Exactly one interrupt specifier. -- timeout-sec : Contain the default watchdog timeout in seconds. -- clock-names : Contain the input clock names. -- clocks : Phandles to input clocks. - -Example: - watchdog: watchdog@40310000 { - compatible = "sprd,sp9860-wdt"; - reg = <0 0x40310000 0 0x1000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - timeout-sec = <12>; - clock-names = "enable", "rtc_enable"; - clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>; - }; diff --git a/dts/Bindings/watchdog/starfive,jh7100-wdt.yaml b/dts/Bindings/watchdog/starfive,jh7100-wdt.yaml index 68f3f6fd08..e21f807b0b 100644 --- a/dts/Bindings/watchdog/starfive,jh7100-wdt.yaml +++ b/dts/Bindings/watchdog/starfive,jh7100-wdt.yaml @@ -19,14 +19,16 @@ description: isn't cleared, the watchdog will reset the system unless the watchdog reset is disabled. -allOf: - - $ref: watchdog.yaml# - properties: compatible: - enum: - - starfive,jh7100-wdt - - starfive,jh7110-wdt + oneOf: + - enum: + - starfive,jh7100-wdt + - starfive,jh7110-wdt + - items: + - enum: + - starfive,jh8100-wdt + - const: starfive,jh7110-wdt reg: maxItems: 1 @@ -45,9 +47,8 @@ properties: - const: core resets: - items: - - description: APB reset - - description: Core reset + minItems: 1 + maxItems: 2 required: - compatible @@ -56,6 +57,27 @@ required: - clock-names - resets +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - starfive,jh8100-wdt + then: + properties: + resets: + items: + - description: Core reset + else: + properties: + resets: + items: + - description: APB reset + - description: Core reset + unevaluatedProperties: false examples: diff --git a/dts/Bindings/writing-schema.rst b/dts/Bindings/writing-schema.rst index 0a6cf19a14..7e71cdd1d6 100644 --- a/dts/Bindings/writing-schema.rst +++ b/dts/Bindings/writing-schema.rst @@ -31,7 +31,7 @@ $schema Indicates the meta-schema the schema file adheres to. title - A one-line description on the contents of the binding schema. + A one-line description of the hardware being described in the binding schema. maintainers A DT specific property. Contains a list of email address(es) @@ -39,7 +39,7 @@ maintainers description Optional. A multi-line text block containing any detailed - information about this binding. It should contain things such as what the block + information about this hardware. It should contain things such as what the block or device does, standards the device conforms to, and links to datasheets for more information. @@ -71,9 +71,31 @@ required A list of DT properties from the 'properties' section that must always be present. +additionalProperties / unevaluatedProperties + Keywords controlling how schema will validate properties not matched by this + schema's 'properties' or 'patternProperties'. Each schema is supposed to + have exactly one of these keywords in top-level part, so either + additionalProperties or unevaluatedProperties. Nested nodes, so properties + being objects, are supposed to have one as well. + + * additionalProperties: false + Most common case, where no additional schema is referenced or if this + binding allows subset of properties from other referenced schemas. + + * unevaluatedProperties: false + Used when this binding references other schema whose all properties + should be allowed. + + * additionalProperties: true + Rare case, used for schemas implementing common set of properties. Such + schemas are supposed to be referenced by other schemas, which then use + 'unevaluatedProperties: false'. Typically bus or common-part schemas. + examples - Optional. A list of one or more DTS hunks implementing the - binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + Optional. A list of one or more DTS hunks implementing this binding only. + Example should not contain unrelated device nodes, e.g. consumer nodes in a + provider binding, other nodes referenced by phandle. + Note: YAML doesn't allow leading tabs, so spaces must be used instead. Unless noted otherwise, all properties are required. |