diff options
Diffstat (limited to 'dts/Bindings')
736 files changed, 14591 insertions, 5737 deletions
diff --git a/dts/Bindings/.yamllint b/dts/Bindings/.yamllint index 4abe9f0a1d..fea5231e13 100644 --- a/dts/Bindings/.yamllint +++ b/dts/Bindings/.yamllint @@ -1,6 +1,11 @@ extends: relaxed rules: + quoted-strings: + required: only-when-needed + extra-allowed: + - '[$^,[]' + - '^/$' line-length: # 80 chars should be enough, but don't fail if a line is longer max: 110 diff --git a/dts/Bindings/arm/amlogic.yaml b/dts/Bindings/arm/amlogic.yaml index 08d5984265..1c1094cd6b 100644 --- a/dts/Bindings/arm/amlogic.yaml +++ b/dts/Bindings/arm/amlogic.yaml @@ -218,6 +218,14 @@ properties: - amlogic,aq222 - const: amlogic,s4 + - description: Boards with the Amlogic T7 A311D2 SoC + items: + - enum: + - amlogic,an400 + - khadas,vim4 + - const: amlogic,a311d2 + - const: amlogic,t7 + additionalProperties: true ... diff --git a/dts/Bindings/arm/arm,coresight-cti.yaml b/dts/Bindings/arm/arm,coresight-cti.yaml index d6c84b6e7f..6216cfb0a1 100644 --- a/dts/Bindings/arm/arm,coresight-cti.yaml +++ b/dts/Bindings/arm/arm,coresight-cti.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2019 Linaro Ltd. %YAML 1.2 --- diff --git a/dts/Bindings/arm/arm,coresight-dummy-sink.yaml b/dts/Bindings/arm/arm,coresight-dummy-sink.yaml index cb78cfa567..c960c8e0a9 100644 --- a/dts/Bindings/arm/arm,coresight-dummy-sink.yaml +++ b/dts/Bindings/arm/arm,coresight-dummy-sink.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml# diff --git a/dts/Bindings/arm/arm,coresight-dummy-source.yaml b/dts/Bindings/arm/arm,coresight-dummy-source.yaml index 5fedaed49a..6745b4cc8f 100644 --- a/dts/Bindings/arm/arm,coresight-dummy-source.yaml +++ b/dts/Bindings/arm/arm,coresight-dummy-source.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml# diff --git a/dts/Bindings/arm/arm,embedded-trace-extension.yaml b/dts/Bindings/arm/arm,embedded-trace-extension.yaml index 108460627d..f725e69409 100644 --- a/dts/Bindings/arm/arm,embedded-trace-extension.yaml +++ b/dts/Bindings/arm/arm,embedded-trace-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Embedded Trace Extensions diff --git a/dts/Bindings/arm/arm,trace-buffer-extension.yaml b/dts/Bindings/arm/arm,trace-buffer-extension.yaml index b132265806..87128e7b7d 100644 --- a/dts/Bindings/arm/arm,trace-buffer-extension.yaml +++ b/dts/Bindings/arm/arm,trace-buffer-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Trace Buffer Extensions @@ -19,7 +19,8 @@ description: | properties: $nodename: - const: "trbe" + const: trbe + compatible: items: - const: arm,trace-buffer-extension diff --git a/dts/Bindings/arm/arm,versatile-sysreg.yaml b/dts/Bindings/arm/arm,versatile-sysreg.yaml index 491eef1e1b..3b060c36b9 100644 --- a/dts/Bindings/arm/arm,versatile-sysreg.yaml +++ b/dts/Bindings/arm/arm,versatile-sysreg.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml# diff --git a/dts/Bindings/arm/arm,vexpress-juno.yaml b/dts/Bindings/arm/arm,vexpress-juno.yaml index cdd65881fc..8dd6b64463 100644 --- a/dts/Bindings/arm/arm,vexpress-juno.yaml +++ b/dts/Bindings/arm/arm,vexpress-juno.yaml @@ -143,7 +143,7 @@ patternProperties: "simple-bus". If the compatible is placed in the "motherboard-bus" node, it is stricter and always has two compatibles. type: object - $ref: '/schemas/simple-bus.yaml' + $ref: /schemas/simple-bus.yaml unevaluatedProperties: false properties: diff --git a/dts/Bindings/arm/aspeed/aspeed,sbc.yaml b/dts/Bindings/arm/aspeed/aspeed,sbc.yaml index c72aab7064..b8c5cacb09 100644 --- a/dts/Bindings/arm/aspeed/aspeed,sbc.yaml +++ b/dts/Bindings/arm/aspeed/aspeed,sbc.yaml @@ -2,8 +2,8 @@ # Copyright 2021 Joel Stanley, IBM Corp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ASPEED Secure Boot Controller diff --git a/dts/Bindings/arm/aspeed/aspeed.yaml b/dts/Bindings/arm/aspeed/aspeed.yaml index e0eff4c058..68f717670f 100644 --- a/dts/Bindings/arm/aspeed/aspeed.yaml +++ b/dts/Bindings/arm/aspeed/aspeed.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# @@ -79,9 +79,11 @@ properties: - facebook,elbert-bmc - facebook,fuji-bmc - facebook,greatlakes-bmc + - facebook,yosemite4-bmc - ibm,everest-bmc - ibm,rainier-bmc - ibm,tacoma-bmc + - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc - qcom,dc-scm-v1-bmc diff --git a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml index 5c3ac97e87..4cc4e67546 100644 --- a/dts/Bindings/arm/bcm/brcm,bcm4708.yaml +++ b/dts/Bindings/arm/bcm/brcm,bcm4708.yaml @@ -66,6 +66,7 @@ properties: - description: BCM47094 based boards items: - enum: + - asus,rt-ac3100 - asus,rt-ac88u - dlink,dir-885l - dlink,dir-890l diff --git a/dts/Bindings/arm/bcm/brcm,bcm53573.yaml b/dts/Bindings/arm/bcm/brcm,bcm53573.yaml new file mode 100644 index 0000000000..81b9a4a641 --- /dev/null +++ b/dts/Bindings/arm/bcm/brcm,bcm53573.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm53573.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53573 SoCs family + +description: + Broadcom BCM53573 / BCM47189 Wi-Fi SoCs derived from Northstar. + +maintainers: + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM53573 based boards + items: + - enum: + - tenda,ac6-v1 + - tenda,w15e-v1 + - const: brcm,bcm53573 + + - description: BCM47189 based boards + items: + - enum: + - brcm,bcm947189acdbmr + - luxul,xap-810-v1 + - luxul,xap-1440-v1 + - tenda,ac9 + - const: brcm,bcm47189 + - const: brcm,bcm53573 + +additionalProperties: true + +... diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml index 9e6a45eea4..0d17cbad97 100644 --- a/dts/Bindings/arm/cpus.yaml +++ b/dts/Bindings/arm/cpus.yaml @@ -143,8 +143,10 @@ properties: - arm,cortex-a78ae - arm,cortex-a78c - arm,cortex-a510 + - arm,cortex-a520 - arm,cortex-a710 - arm,cortex-a715 + - arm,cortex-a720 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -158,6 +160,7 @@ properties: - arm,cortex-x1c - arm,cortex-x2 - arm,cortex-x3 + - arm,cortex-x4 - arm,neoverse-e1 - arm,neoverse-n1 - arm,neoverse-n2 diff --git a/dts/Bindings/arm/firmware/tlm,trusted-foundations.yaml b/dts/Bindings/arm/firmware/tlm,trusted-foundations.yaml index 9d1857c0aa..e3980b659f 100644 --- a/dts/Bindings/arm/firmware/tlm,trusted-foundations.yaml +++ b/dts/Bindings/arm/firmware/tlm,trusted-foundations.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Trusted Foundations diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml index 2510eaa890..9450b2c8a6 100644 --- a/dts/Bindings/arm/fsl.yaml +++ b/dts/Bindings/arm/fsl.yaml @@ -909,6 +909,7 @@ properties: - fsl,imx8mm-evk # i.MX8MM EVK Board - fsl,imx8mm-evkb # i.MX8MM EVKB Board - gateworks,imx8mm-gw7904 + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit @@ -1031,10 +1032,11 @@ properties: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board - - polyhex,imx8mp-debix # Polyhex Debix boards - - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules @@ -1068,6 +1070,20 @@ properties: - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM - const: fsl,imx8mp + - description: Polyhex DEBIX i.MX8MP based SBCs + items: + - enum: + - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board + - const: polyhex,imx8mp-debix # Polyhex i.MX8MP Debix SBCs + - const: fsl,imx8mp + + - description: Polyhex DEBIX i.MX8MP SOM A based boards + items: + - enum: + - polyhex,imx8mp-debix-som-a-bmb-08 # Polyhex Debix SOM A on SOM A I/O board + - const: polyhex,imx8mp-debix-som-a # Polyhex Debix SOM A + - const: fsl,imx8mp + - description: Toradex Boards with Verdin iMX8M Plus Modules items: - enum: @@ -1220,11 +1236,30 @@ properties: - const: fsl,imxrt1170 - description: + TQMa93xxLA and TQMa93xxCA are two series of feature compatible SOM + using NXP i.MX93 SOC in 11x11 mm package. + TQMa93xxLA is designed to be soldered on different carrier boards. + TQMa93xxCA is a compatible variant using board to board connectors. + All SOM and CPU variants use the same device tree hence only one + compatible is needed. Bootloader disables all features not present + in the assembled SOC. + MBa93xxCA mainboard can be used as starterkit for the SOM + soldered on an adapter board or for the connector variant + MBa93xxLA mainboard is a single board computer using the solderable + SOM variant + items: + - enum: + - tq,imx93-tqma9352-mba93xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa93xxCA + - tq,imx93-tqma9352-mba93xxla # TQ-Systems GmbH i.MX93 TQMa93xxLA SOM on MBa93xxLA SBC + - const: tq,imx93-tqma9352 # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM + - const: fsl,imx93 + + - description: Freescale Vybrid Platform Device Tree Bindings - For the Vybrid SoC familiy all variants with DDR controller are supported, + For the Vybrid SoC family all variants with DDR controller are supported, which is the VF5xx and VF6xx series. Out of historical reasons, in most - places the kernel uses vf610 to refer to the whole familiy. + places the kernel uses vf610 to refer to the whole family. The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 core support. items: @@ -1289,6 +1324,16 @@ properties: - fsl,ls1021a-twr - const: fsl,ls1021a + - description: + TQ-Systems TQMLS102xA is a series of socketable SOM featuring + LS102x system-on-chip variants. MBLS102xA mainboard can be used as + starterkit. + items: + - enum: + - tq,ls1021a-tqmls1021a-mbls102xa + - const: tq,ls1021a-tqmls1021a + - const: fsl,ls1021a + - description: LS1028A based Boards items: - enum: diff --git a/dts/Bindings/arm/hisilicon/controller/cpuctrl.yaml b/dts/Bindings/arm/hisilicon/controller/cpuctrl.yaml index 528dad4cde..4fc208d399 100644 --- a/dts/Bindings/arm/hisilicon/controller/cpuctrl.yaml +++ b/dts/Bindings/arm/hisilicon/controller/cpuctrl.yaml @@ -29,6 +29,26 @@ properties: ranges: true +patternProperties: + "^clock@[0-9a-f]+$": + type: object + additionalProperties: false + + properties: + compatible: + const: hisilicon,hix5hd2-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + required: + - compatible + - reg + - "#clock-cells" + required: - compatible - reg diff --git a/dts/Bindings/arm/intel,socfpga.yaml b/dts/Bindings/arm/intel,socfpga.yaml index 4b4dcf551e..2ee0c740eb 100644 --- a/dts/Bindings/arm/intel,socfpga.yaml +++ b/dts/Bindings/arm/intel,socfpga.yaml @@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex5 boards + items: + - enum: + - intel,socfpga-agilex5-socdk + - const: intel,socfpga-agilex5 additionalProperties: true diff --git a/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml b/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml index ff378d5cbd..4a323e8c78 100644 --- a/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml +++ b/dts/Bindings/arm/keystone/ti,k3-sci-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml# diff --git a/dts/Bindings/arm/keystone/ti,sci.yaml b/dts/Bindings/arm/keystone/ti,sci.yaml index 86b59de770..c24ad0968f 100644 --- a/dts/Bindings/arm/keystone/ti,sci.yaml +++ b/dts/Bindings/arm/keystone/ti,sci.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml# diff --git a/dts/Bindings/arm/marvell/cp110-system-controller.txt b/dts/Bindings/arm/marvell/cp110-system-controller.txt index d84105c7c9..9d5d70c980 100644 --- a/dts/Bindings/arm/marvell/cp110-system-controller.txt +++ b/dts/Bindings/arm/marvell/cp110-system-controller.txt @@ -21,13 +21,13 @@ The Device Tree node representing this System Controller 0 provides a number of clocks: - a set of core clocks - - a set of gatable clocks + - a set of gateable clocks Those clocks can be referenced by other Device Tree nodes using two cells: - The first cell must be 0 or 1. 0 for the core clocks and 1 for the - gatable clocks. - - The second cell identifies the particular core clock or gatable + gateable clocks. + - The second cell identifies the particular core clock or gateable clocks. The following clocks are available: @@ -38,7 +38,7 @@ The following clocks are available: - 0 3 Core - 0 4 NAND core - 0 5 SDIO core - - Gatable clocks + - Gateable clocks - 1 0 Audio - 1 1 Comm Unit - 1 2 NAND diff --git a/dts/Bindings/arm/mediatek/mediatek,mipi0a.txt b/dts/Bindings/arm/mediatek/mediatek,mipi0a.txt index 8be5978f38..1c671943ce 100644 --- a/dts/Bindings/arm/mediatek/mediatek,mipi0a.txt +++ b/dts/Bindings/arm/mediatek/mediatek,mipi0a.txt @@ -16,7 +16,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The mipi0a controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/dts/Bindings/arm/mediatek/mediatek,vcodecsys.txt b/dts/Bindings/arm/mediatek/mediatek,vcodecsys.txt index c877bcc1a5..f090147b7f 100644 --- a/dts/Bindings/arm/mediatek/mediatek,vcodecsys.txt +++ b/dts/Bindings/arm/mediatek/mediatek,vcodecsys.txt @@ -15,7 +15,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The vcodecsys controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/dts/Bindings/arm/msm/ssbi.txt b/dts/Bindings/arm/msm/ssbi.txt deleted file mode 100644 index 54fd5ced34..0000000000 --- a/dts/Bindings/arm/msm/ssbi.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Qualcomm SSBI - -Some Qualcomm MSM devices contain a point-to-point serial bus used to -communicate with a limited range of devices (mostly power management -chips). - -These require the following properties: - -- compatible: "qcom,ssbi" - -- qcom,controller-type - indicates the SSBI bus variant the controller should use to talk - with the slave device. This should be one of "ssbi", "ssbi2", or - "pmic-arbiter". The type chosen is determined by the attached - slave. - -The slave device should be the single child node of the ssbi device -with a compatible field. diff --git a/dts/Bindings/arm/mstar/mstar,l3bridge.yaml b/dts/Bindings/arm/mstar/mstar,l3bridge.yaml index 6816bd68f9..a8ac4a2d67 100644 --- a/dts/Bindings/arm/mstar/mstar,l3bridge.yaml +++ b/dts/Bindings/arm/mstar/mstar,l3bridge.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC l3bridge diff --git a/dts/Bindings/arm/mstar/mstar,smpctrl.yaml b/dts/Bindings/arm/mstar/mstar,smpctrl.yaml index 599c65980f..5739848000 100644 --- a/dts/Bindings/arm/mstar/mstar,smpctrl.yaml +++ b/dts/Bindings/arm/mstar/mstar,smpctrl.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC SMP control registers diff --git a/dts/Bindings/arm/omap/ctrl.txt b/dts/Bindings/arm/omap/ctrl.txt index f35b779207..0ce6665df4 100644 --- a/dts/Bindings/arm/omap/ctrl.txt +++ b/dts/Bindings/arm/omap/ctrl.txt @@ -8,7 +8,7 @@ control module driver itself. See [2] for documentation about clock/clockdomain nodes. -[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml [2] Documentation/devicetree/bindings/clock/ti/* Required properties: diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt index fa8b31660c..c863ec07cb 100644 --- a/dts/Bindings/arm/omap/omap.txt +++ b/dts/Bindings/arm/omap/omap.txt @@ -41,14 +41,6 @@ SoC Type (optional): SoC Families: -- OMAP2 generic - defaults to OMAP2420 - compatible = "ti,omap2" -- OMAP3 generic - compatible = "ti,omap3" -- OMAP4 generic - defaults to OMAP4430 - compatible = "ti,omap4" -- OMAP5 generic - defaults to OMAP5430 - compatible = "ti,omap5" - DRA7 generic - defaults to DRA742 compatible = "ti,dra7" - AM33x generic @@ -58,32 +50,6 @@ SoC Families: SoCs: -- OMAP2420 - compatible = "ti,omap2420", "ti,omap2" -- OMAP2430 - compatible = "ti,omap2430", "ti,omap2" - -- OMAP3430 - compatible = "ti,omap3430", "ti,omap3" - legacy: "ti,omap34xx" - please do not use any more -- AM3517 - compatible = "ti,am3517", "ti,omap3" -- OMAP3630 - compatible = "ti,omap3630", "ti,omap3" - legacy: "ti,omap36xx" - please do not use any more -- AM335x - compatible = "ti,am33xx" - -- OMAP4430 - compatible = "ti,omap4430", "ti,omap4" -- OMAP4460 - compatible = "ti,omap4460", "ti,omap4" - -- OMAP5430 - compatible = "ti,omap5430", "ti,omap5" -- OMAP5432 - compatible = "ti,omap5432", "ti,omap5" - - DRA762 compatible = "ti,dra762", "ti,dra7" @@ -116,65 +82,6 @@ SoCs: Boards (incomplete list of examples): -- OMAP3 BeagleBoard : Low cost community board - compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - -- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk - compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - -- OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" - -- OMAP4 SDP : Software Development Board - compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4" - -- OMAP4 PandaBoard : Low cost community board - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4" - -- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board - compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; - -- OMAP4 VAR-STK-OM44 : Commercial dev kit with VAR-OM44CustomBoard and VAR-SOM-OM44 w/WLAN - compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - -- OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD touchscreen - compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - -- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x - compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3" - -- AM335X EVM : Software Development Board for AM335x - compatible = "ti,am335x-evm", "ti,am33xx" - -- AM335X Bone : Low cost community board - compatible = "ti,am335x-bone", "ti,am33xx" - -- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. - compatible = "ti,am3359-icev2", "ti,am33xx" - -- AM335X OrionLXm : Substation Automation Platform - compatible = "novatech,am335x-lxm", "ti,am33xx" - -- AM335X phyBOARD-WEGA: Single Board Computer dev kit - compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4 - compatible = "compulab,cm-t335", "ti,am33xx" - -- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4 - compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx" - -- AM335X phyCORE-AM335x: Development kit - compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335x phyBOARD-REGOR: Single Board Computer - compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335X UC-8100-ME-T: Communication-centric industrial computing platform - compatible = "moxa,uc-8100-me-t", "ti,am33xx"; - -- OMAP5 EVM : Evaluation Module - compatible = "ti,omap5-evm", "ti,omap5" - AM437x CM-T43 compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43" @@ -217,9 +124,3 @@ Boards (incomplete list of examples): - DRA718 EVM: Software Development Board for DRA718 compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" - -- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3" - -- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3" diff --git a/dts/Bindings/arm/pmu.yaml b/dts/Bindings/arm/pmu.yaml index e14358bf0b..99b5e95307 100644 --- a/dts/Bindings/arm/pmu.yaml +++ b/dts/Bindings/arm/pmu.yaml @@ -49,9 +49,14 @@ properties: - arm,cortex-a77-pmu - arm,cortex-a78-pmu - arm,cortex-a510-pmu + - arm,cortex-a520-pmu - arm,cortex-a710-pmu + - arm,cortex-a715-pmu + - arm,cortex-a720-pmu - arm,cortex-x1-pmu - arm,cortex-x2-pmu + - arm,cortex-x3-pmu + - arm,cortex-x4-pmu - arm,neoverse-e1-pmu - arm,neoverse-n1-pmu - arm,neoverse-n2-pmu diff --git a/dts/Bindings/arm/qcom,coresight-tpda.yaml b/dts/Bindings/arm/qcom,coresight-tpda.yaml index 2ec9b5b24d..ea3c5db6b5 100644 --- a/dts/Bindings/arm/qcom,coresight-tpda.yaml +++ b/dts/Bindings/arm/qcom,coresight-tpda.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/dts/Bindings/arm/qcom,coresight-tpdm.yaml b/dts/Bindings/arm/qcom,coresight-tpdm.yaml index 5c08342664..3bad47b7b0 100644 --- a/dts/Bindings/arm/qcom,coresight-tpdm.yaml +++ b/dts/Bindings/arm/qcom,coresight-tpdm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/dts/Bindings/arm/qcom-soc.yaml b/dts/Bindings/arm/qcom-soc.yaml index e333ec4a9c..97621c92a1 100644 --- a/dts/Bindings/arm/qcom-soc.yaml +++ b/dts/Bindings/arm/qcom-soc.yaml @@ -31,7 +31,7 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml index 450f616774..adbfaea323 100644 --- a/dts/Bindings/arm/qcom.yaml +++ b/dts/Bindings/arm/qcom.yaml @@ -30,6 +30,7 @@ description: | apq8084 apq8096 ipq4018 + ipq5018 ipq5332 ipq6018 ipq8074 @@ -72,6 +73,7 @@ description: | sdx65 sdx75 sm4250 + sm4450 sm6115 sm6115p sm6125 @@ -104,6 +106,7 @@ description: | hk10-c2 idp liquid + rdp432-c2 mtp qrd rb2 @@ -186,6 +189,7 @@ properties: - items: - enum: + - samsung,a7 - sony,kanuti-tulip - square,apq8039-t2 - const: qcom,msm8939 @@ -341,6 +345,11 @@ properties: - items: - enum: + - qcom,ipq5018-rdp432-c2 + - const: qcom,ipq5018 + + - items: + - enum: - qcom,ipq5332-ap-mi01.2 - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 @@ -904,6 +913,11 @@ properties: - items: - enum: + - qcom,sm4450-qrd + - const: qcom,sm4450 + + - items: + - enum: - fxtec,pro1x - const: qcom,sm6115 diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml index ecdb72a519..ca53898628 100644 --- a/dts/Bindings/arm/rockchip.yaml +++ b/dts/Bindings/arm/rockchip.yaml @@ -196,6 +196,11 @@ properties: - const: firefly,rk3566-roc-pc - const: rockchip,rk3566 + - description: Firefly Station P2 + items: + - const: firefly,rk3568-roc-pc + - const: rockchip,rk3568 + - description: FriendlyElec NanoPi R2 series boards items: - enum: @@ -222,6 +227,11 @@ properties: - friendlyarm,nanopi-r5s - const: rockchip,rk3568 + - description: FriendlyElec NanoPC T6 + items: + - const: friendlyarm,nanopc-t6 + - const: rockchip,rk3588 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -694,6 +704,11 @@ properties: - const: radxa,rock-4c-plus - const: rockchip,rk3399 + - description: Radxa ROCK 4SE + items: + - const: radxa,rock-4se + - const: rockchip,rk3399 + - description: Radxa ROCK Pi E items: - const: radxa,rockpi-e diff --git a/dts/Bindings/arm/stm32/st,mlahb.yaml b/dts/Bindings/arm/stm32/st,mlahb.yaml index 2297ad3f47..d2dce238ff 100644 --- a/dts/Bindings/arm/stm32/st,mlahb.yaml +++ b/dts/Bindings/arm/stm32/st,mlahb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 ML-AHB interconnect diff --git a/dts/Bindings/arm/stm32/st,stm32-syscon.yaml b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml index b63ff591ef..d083d8ad48 100644 --- a/dts/Bindings/arm/stm32/st,stm32-syscon.yaml +++ b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 Platforms System Controller diff --git a/dts/Bindings/arm/stm32/stm32.yaml b/dts/Bindings/arm/stm32/stm32.yaml index 4466b455bf..4bf28e717a 100644 --- a/dts/Bindings/arm/stm32/stm32.yaml +++ b/dts/Bindings/arm/stm32/stm32.yaml @@ -143,7 +143,9 @@ properties: - description: Octavo OSD32MP15x System-in-Package based boards items: - enum: - - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - lxa,stm32mp157c-tac-gen1 # Linux Automation TAC (Generation 1) + - lxa,stm32mp157c-tac-gen2 # Linux Automation TAC (Generation 2) - const: oct,stm32mp15xx-osd32 - enum: - st,stm32mp157 diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml index ee8fdd2da8..e4dd678f42 100644 --- a/dts/Bindings/arm/sunxi.yaml +++ b/dts/Bindings/arm/sunxi.yaml @@ -541,13 +541,13 @@ properties: - const: msi,primo81 - const: allwinner,sun6i-a31s - - description: Emlid Neutis N5 Developper Board + - description: Emlid Neutis N5 Developer Board items: - const: emlid,neutis-n5-devboard - const: emlid,neutis-n5 - const: allwinner,sun50i-h5 - - description: Emlid Neutis N5H3 Developper Board + - description: Emlid Neutis N5H3 Developer Board items: - const: emlid,neutis-n5h3-devboard - const: emlid,neutis-n5h3 @@ -997,4 +997,9 @@ properties: - const: xunlong,orangepi-zero2 - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi Zero 3 + items: + - const: xunlong,orangepi-zero3 + - const: allwinner,sun50i-h618 + additionalProperties: true diff --git a/dts/Bindings/arm/tegra/nvidia,nvec.txt b/dts/Bindings/arm/tegra/nvidia,nvec.txt deleted file mode 100644 index 5ae601e7f5..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,nvec.txt +++ /dev/null @@ -1,21 +0,0 @@ -NVIDIA compliant embedded controller - -Required properties: -- compatible : should be "nvidia,nvec". -- reg : the iomem of the i2c slave controller -- interrupts : the interrupt line of the i2c slave controller -- clock-frequency : the frequency of the i2c bus -- gpios : the gpio used for ec request -- slave-addr: the i2c address of the slave controller -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2c diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt deleted file mode 100644 index 9a4295b545..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt +++ /dev/null @@ -1,17 +0,0 @@ -NVIDIA Tegra AHB - -Required properties: -- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For - Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain - '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, - tegra132, or tegra210. -- reg : Should contain 1 register ranges(address and length). For - Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004 - 0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should - be be <0x6000c000 0x150>. - -Example (for a Tegra20 chip): - ahb: ahb@6000c004 { - compatible = "nvidia,tegra20-ahb"; - reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt deleted file mode 100644 index a855c1bffc..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt +++ /dev/null @@ -1,18 +0,0 @@ -NVIDIA Tegra Flow Controller - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra20-flowctrl": for Tegra20 - - "nvidia,tegra30-flowctrl": for Tegra30 - - "nvidia,tegra114-flowctrl": for Tegra114 - - "nvidia,tegra124-flowctrl": for Tegra124 - - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132 - - "nvidia,tegra210-flowctrl": for Tegra210 -- reg: Should contain one register range (address and length) - -Example: - - flow-controller@60007000 { - compatible = "nvidia,tegra20-flowctrl"; - reg = <0x60007000 0x1000>; - }; diff --git a/dts/Bindings/arm/ti/k3.yaml b/dts/Bindings/arm/ti/k3.yaml index 577eee95c8..03d2a0d79f 100644 --- a/dts/Bindings/arm/ti/k3.yaml +++ b/dts/Bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM62P5 SoC and Boards + items: + - enum: + - ti,am62p5-sk + - const: ti,am62p5 + - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra items: - const: phytec,am625-phyboard-lyra-rdk @@ -72,6 +78,13 @@ properties: - const: phytec,am64-phycore-som - const: ti,am642 + - description: K3 AM642 SoC on TQ-Systems TQMaX4XxL SoM + items: + - enum: + - tq,am642-tqma6442l-mbax4xxl # MBaX4XxL base board + - const: tq,am642-tqma6442l + - const: ti,am642 + - description: K3 AM654 SoC items: - enum: diff --git a/dts/Bindings/arm/ti/omap.yaml b/dts/Bindings/arm/ti/omap.yaml new file mode 100644 index 0000000000..b18fc04639 --- /dev/null +++ b/dts/Bindings/arm/ti/omap.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/omap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP SoC architecture + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: Platforms based on Texas Instruments OMAP SoC architecture. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: TI OMAP2420 SoC based platforms + items: + - enum: + - nokia,n800 + - nokia,n810 + - nokia,n810-wimax + - ti,omap2420-h4 + - const: ti,omap2420 + - const: ti,omap2 + + - description: TI OMAP2430 SoC based platforms + items: + - enum: + - ti,omap2430-sdp # TI OMAP2430 SDP + - const: ti,omap2430 + - const: ti,omap2 + + - description: TI OMAP3430 SoC based platforms + items: + - enum: + - compulab,omap3-cm-t3530 + - logicpd,dm3730-som-lv-devkit # LogicPD Zoom OMAP35xx SOM-LV Development Kit + - logicpd,dm3730-torpedo-devkit # LogicPD Zoom OMAP35xx Torpedo Development Kit + - nokia,omap3-n900 + - openpandora,omap3-pandora-600mhz + - ti,omap3430-sdp + - ti,omap3-beagle + - ti,omap3-evm # TI OMAP35XX EVM (TMDSEVM3530) + - ti,omap3-ldp # TI OMAP3430 LDP (Zoom1 Labrador) + - timll,omap3-devkit8000 + - const: ti,omap3430 + - const: ti,omap3 + + - description: Early BeagleBoard revisions A to B4 with a timer quirk + items: + - const: ti,omap3-beagle-ab4 + - const: ti,omap3-beagle + - const: ti,omap3430 + - const: ti,omap3 + + - description: Gumstix Overo TI OMAP 3430/3630 boards + expansion boards + items: + - enum: + - gumstix,omap3-overo-alto35 + - gumstix,omap3-overo-chestnut43 + - gumstix,omap3-overo-gallop43 + - gumstix,omap3-overo-palo35 + - gumstix,omap3-overo-palo43 + - gumstix,omap3-overo-summit + - gumstix,omap3-overo-tobi + - gumstix,omap3-overo-tobiduo + - const: gumstix,omap3-overo + - enum: + - ti,omap3430 + - ti,omap3630 + + - description: TI OMAP3630 SoC based platforms + items: + - enum: + - amazon,omap3-echo # Amazon Echo (first generation) + - compulab,omap3-cm-t3730 + - goldelico,gta04 + - lg,omap3-sniper # LG Optimus Black + - logicpd,dm3730-som-lv-devkit # LogicPD Zoom DM3730 SOM-LV Development Kit + - logicpd,dm3730-torpedo-devkit # LogicPD Zoom DM3730 Torpedo + Wireless Development Kit + - nokia,omap3-n9 + - nokia,omap3-n950 + - openpandora,omap3-pandora-1ghz + - ti,omap3-beagle-xm + - ti,omap3-evm-37xx # TI OMAP37XX EVM (TMDSEVM3730) + - ti,omap3-zoom3 + - const: ti,omap3630 + - const: ti,omap3 + + - description: TI AM35 SoC based platforms + items: + - enum: + - compulab,omap3-sbc-t3517 # CompuLab SBC-T3517 with CM-T3517 + - teejet,mt_ventoux + - ti,am3517-craneboard # TI AM3517 CraneBoard (TMDSEVM3517) + - ti,am3517-evm # TI AM3517 EVM (AM3517/05 TMDSEVM3517) + - const: ti,am3517 + - const: ti,omap3 + + - description: TI AM33 based platform + items: + - enum: + - compulab,cm-t335 + - moxa,uc-8100-me-t + - novatech,am335x-lxm + - ti,am335x-bone + - ti,am335x-evm + - ti,am3359-icev2 + - const: ti,am33xx + + - description: Compulab board variants based on TI AM33 + items: + - enum: + - compulab,sbc-t335 + - const: compulab,cm-t335 + - const: ti,am33xx + + - description: Phytec boards based on TI AM33 + items: + - enum: + - phytec,am335x-wega + - phytec,am335x-pcm-953 + - phytec,am335x-regor + - const: phytec,am335x-phycore-som + - const: ti,am33xx + + - description: TI OMAP4430 SoC based platforms + items: + - enum: + - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) + - motorola,droid4 # Motorola Droid 4 XT894 + - motorola,droid-bionic # Motorola Droid Bionic XT875 + - ti,omap4-panda + - ti,omap4-sdp + - const: ti,omap4430 + - const: ti,omap4 + + - description: OMAP4 DuoVero with Parlor expansion board/daughter board + items: + - const: gumstix,omap4-duovero-parlor + - const: gumstix,omap4-duovero + - const: ti,omap4430 + - const: ti,omap4 + + - description: TI OMAP4460 SoC based platforms + items: + - enum: + - epson,embt2ws # Epson Moverio BT-200 + - ti,omap4-panda-es + - const: ti,omap4460 + - const: ti,omap4 + + - description: VAR-OM44 boards + items: + - enum: + - variscite,var-dvk-om44 + - variscite,var-stk-om44 + - const: variscite,var-som-om44 + - const: ti,omap4460 + - const: ti,omap4 + + - description: TI OMAP5 SoC based platforms + items: + - enum: + - compulab,omap5-cm-t54 + - isee,omap5-igep0050 + - ti,omap5-uevm + - const: ti,omap5 + +additionalProperties: true + +... diff --git a/dts/Bindings/ata/pata-common.yaml b/dts/Bindings/ata/pata-common.yaml index 2412894a25..337ddf1113 100644 --- a/dts/Bindings/ata/pata-common.yaml +++ b/dts/Bindings/ata/pata-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to most Parallel ATA (PATA, also known as IDE) AT attachment storage devices. - It doesn't constitue a device tree binding specification by itself but is + It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. The PATA (IDE) controller-specific device tree bindings are responsible for diff --git a/dts/Bindings/bus/brcm,gisb-arb.yaml b/dts/Bindings/bus/brcm,gisb-arb.yaml index b23c300199..3aaefdbe36 100644 --- a/dts/Bindings/bus/brcm,gisb-arb.yaml +++ b/dts/Bindings/bus/brcm,gisb-arb.yaml @@ -43,7 +43,7 @@ properties: brcm,gisb-arb-master-names: $ref: /schemas/types.yaml#/definitions/string-array description: > - String list of the litteral name of the GISB masters. Should match the + String list of the literal name of the GISB masters. Should match the number of bits set in brcm,gisb-master-mask and the order in which they appear from MSB to LSB. diff --git a/dts/Bindings/bus/nvidia,tegra210-aconnect.yaml b/dts/Bindings/bus/nvidia,tegra210-aconnect.yaml index 4157e885c6..26362c9006 100644 --- a/dts/Bindings/bus/nvidia,tegra210-aconnect.yaml +++ b/dts/Bindings/bus/nvidia,tegra210-aconnect.yaml @@ -7,10 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NVIDIA Tegra ACONNECT Bus description: | - The Tegra ACONNECT bus is an AXI switch which is used to connnect various + The Tegra ACONNECT bus is an AXI switch which is used to connect various components inside the Audio Processing Engine (APE). All CPU accesses to the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All - devices accessed via the ACONNNECT are described by child-nodes. + devices accessed via the ACONNECT are described by child-nodes. maintainers: - Jon Hunter <jonathanh@nvidia.com> diff --git a/dts/Bindings/bus/qcom,ssbi.yaml b/dts/Bindings/bus/qcom,ssbi.yaml new file mode 100644 index 0000000000..693cfa9696 --- /dev/null +++ b/dts/Bindings/bus/qcom,ssbi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Single-wire Serial Bus Interface (SSBI) + +description: + Some Qualcomm MSM devices contain a point-to-point serial bus used to + communicate with a limited range of devices (mostly power management + chips). + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + const: qcom,ssbi + + reg: + maxItems: 1 + + qcom,controller-type: + description: + Indicates the SSBI bus variant the controller should use to talk + with the slave device. The type chosen is determined by the attached + slave. + enum: + - ssbi + - ssbi2 + - pmic-arbiter + + pmic: + $ref: /schemas/mfd/qcom-pm8xxx.yaml# + +required: + - compatible + - reg + - qcom,controller-type + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmic { + compatible = "qcom,pm8821"; + interrupt-parent = <&msmgpio>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/dts/Bindings/cache/andestech,ax45mp-cache.yaml b/dts/Bindings/cache/andestech,ax45mp-cache.yaml new file mode 100644 index 0000000000..9ab5f0c435 --- /dev/null +++ b/dts/Bindings/cache/andestech,ax45mp-cache.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2023 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cache/andestech,ax45mp-cache.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Andestech AX45MP L2 Cache Controller + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + A level-2 cache (L2C) is used to improve the system performance by providing + a large amount of cache line entries and reasonable access delays. The L2C + is shared between cores, and a non-inclusive non-exclusive policy is used. + +select: + properties: + compatible: + contains: + enum: + - andestech,ax45mp-cache + + required: + - compatible + +properties: + compatible: + items: + - const: andestech,ax45mp-cache + - const: cache + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + cache-line-size: + const: 64 + + cache-level: + const: 2 + + cache-sets: + const: 1024 + + cache-size: + enum: [131072, 262144, 524288, 1048576, 2097152] + + cache-unified: true + + next-level-cache: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - cache-line-size + - cache-level + - cache-sets + - cache-size + - cache-unified + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + cache-controller@2010000 { + compatible = "andestech,ax45mp-cache", "cache"; + reg = <0x13400000 0x100000>; + interrupts = <508 IRQ_TYPE_LEVEL_HIGH>; + cache-line-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <262144>; + cache-unified; + }; diff --git a/dts/Bindings/chrome/google,cros-ec-typec.yaml b/dts/Bindings/chrome/google,cros-ec-typec.yaml index 3b0548c347..9f9816fbec 100644 --- a/dts/Bindings/chrome/google,cros-ec-typec.yaml +++ b/dts/Bindings/chrome/google,cros-ec-typec.yaml @@ -29,10 +29,8 @@ properties: patternProperties: '^connector@[0-9a-f]+$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml index 52a7b6e712..0052bf1e8a 100644 --- a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml +++ b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Gatable Oscillator Clock +title: Allwinner A10 Gateable Oscillator Clock maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/dts/Bindings/clock/alphascale,acc.txt b/dts/Bindings/clock/alphascale,acc.txt index b3205b21c9..c9fb9324c6 100644 --- a/dts/Bindings/clock/alphascale,acc.txt +++ b/dts/Bindings/clock/alphascale,acc.txt @@ -1,7 +1,7 @@ Alphascale Clock Controller -The ACC (Alphascale Clock Controller) is responsible of choising proper -clock source, setting deviders and clock gates. +The ACC (Alphascale Clock Controller) is responsible for choosing proper +clock source, setting dividers and clock gates. Required properties for the ACC node: - compatible: must be "alphascale,asm9260-clock-controller" diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt deleted file mode 100644 index c41f0be5d4..0000000000 --- a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Amlogic GXBB AO Clock and Reset Unit - -The Amlogic GXBB AO clock controller generates and supplies clock to various -controllers within the Always-On part of the SoC. - -Required Properties: - -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,meson-gxbb-aoclkc" - - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" - - GXM (S912) : "amlogic,meson-gxm-aoclkc" - - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" - - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" - followed by the common "amlogic,meson-gx-aoclkc" -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "xtal" : the platform xtal - * "mpeg-clk" : the main clock controller mother clock (aka clk81) - * "ext-32k-0" : external 32kHz reference #0 if any (optional) - * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) - * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be -used in device tree sources. - -- #reset-cells: should be 1. - -Each reset is assigned an identifier and client nodes can use this identifier -to specify the reset which they consume. All available resets are defined as -preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be -used in device tree sources. - -Parent node should have the following properties : -- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" -- reg: base address and size of the AO system control register space. - -Example: AO Clock controller node: - -ao_sysctrl: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - -Example: UART controller node that consumes the clock and reset generated - by the clock controller: - - uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x4c0 0x14>; - interrupts = <0 90 1>; - clocks = <&clkc_AO CLKID_AO_UART1>; - resets = <&clkc_AO RESET_AO_UART1>; - }; diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.yaml b/dts/Bindings/clock/amlogic,gxbb-aoclkc.yaml new file mode 100644 index 0000000000..628e5dd33d --- /dev/null +++ b/dts/Bindings/clock/amlogic,gxbb-aoclkc.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Always-On Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson-gxbb-aoclkc + - amlogic,meson-gxl-aoclkc + - amlogic,meson-gxm-aoclkc + - amlogic,meson-axg-aoclkc + - const: amlogic,meson-gx-aoclkc + - enum: + - amlogic,meson-axg-aoclkc + - amlogic,meson-g12a-aoclkc + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + items: + - const: xtal + - const: mpeg-clk + - const: ext-32k-0 + - const: ext-32k-1 + - const: ext-32k-2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-g12a-aoclkc + + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + - if: + properties: + compatible: + enum: + - amlogic,meson-gxl-aoclkc + - amlogic,meson-gxm-aoclkc + - amlogic,meson-axg-aoclkc + + then: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +additionalProperties: false diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.txt b/dts/Bindings/clock/amlogic,gxbb-clkc.txt deleted file mode 100644 index 7ccecd5c02..0000000000 --- a/dts/Bindings/clock/amlogic,gxbb-clkc.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Amlogic GXBB Clock and Reset Unit - -The Amlogic GXBB clock controller generates and supplies clock to various -controllers within the SoC. - -Required Properties: - -- compatible: should be: - "amlogic,gxbb-clkc" for GXBB SoC, - "amlogic,gxl-clkc" for GXL and GXM SoC, - "amlogic,axg-clkc" for AXG SoC. - "amlogic,g12a-clkc" for G12A SoC. - "amlogic,g12b-clkc" for G12B SoC. - "amlogic,sm1-clkc" for SM1 SoC. -- clocks : list of clock phandle, one for each entry clock-names. -- clock-names : should contain the following: - * "xtal": the platform xtal - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be -used in device tree sources. - -Parent node should have the following properties : -- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or - "amlogic,meson-axg-hhi-sysctrl" -- reg: base address and size of the HHI system control register space. - -Example: Clock controller node: - -sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - #clock-cells = <1>; - compatible = "amlogic,gxbb-clkc"; - clocks = <&xtal>; - clock-names = "xtal"; - }; -}; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - }; diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.yaml b/dts/Bindings/clock/amlogic,gxbb-clkc.yaml new file mode 100644 index 0000000000..63246f1cb5 --- /dev/null +++ b/dts/Bindings/clock/amlogic,gxbb-clkc.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,gxbb-clkc + - amlogic,gxl-clkc + - amlogic,axg-clkc + - amlogic,g12a-clkc + - amlogic,g12b-clkc + - amlogic,sm1-clkc + + clocks: + maxItems: 1 + + clock-names: + const: xtal + + '#clock-cells': + const: 1 + +required: + - compatible + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false diff --git a/dts/Bindings/clock/fsl,imx8-acm.yaml b/dts/Bindings/clock/fsl,imx8-acm.yaml new file mode 100644 index 0000000000..07b9d21719 --- /dev/null +++ b/dts/Bindings/clock/fsl,imx8-acm.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8 Audio Clock Mux + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP + used to control Audio related clock on the SoC. + +properties: + compatible: + enum: + - fsl,imx8dxl-acm + - fsl,imx8qm-acm + - fsl,imx8qxp-acm + + reg: + maxItems: 1 + + power-domains: + minItems: 13 + maxItems: 21 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h + for the full list of i.MX8 ACM clock IDs. + + clocks: + minItems: 13 + maxItems: 27 + + clock-names: + minItems: 13 + maxItems: 27 + +required: + - compatible + - reg + - power-domains + - '#clock-cells' + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_ASRC_1 + - description: power domain of IMX_SC_R_ESAI_0 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SAI_4 + - description: power domain of IMX_SC_R_SAI_5 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 18 + maxItems: 18 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: esai0_rx_clk + - const: esai0_rx_hf_clk + - const: esai0_tx_clk + - const: esai0_tx_hf_clk + - const: spdif0_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + - const: sai4_rx_bclk + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_ASRC_1 + - description: power domain of IMX_SC_R_ESAI_0 + - description: power domain of IMX_SC_R_ESAI_1 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SAI_4 + - description: power domain of IMX_SC_R_SAI_5 + - description: power domain of IMX_SC_R_SAI_6 + - description: power domain of IMX_SC_R_SAI_7 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_SPDIF_1 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 27 + maxItems: 27 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: mlb_clk + - const: hdmi_rx_mclk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: esai0_rx_clk + - const: esai0_rx_hf_clk + - const: esai0_tx_clk + - const: esai0_tx_hf_clk + - const: esai1_rx_clk + - const: esai1_rx_hf_clk + - const: esai1_tx_clk + - const: esai1_tx_hf_clk + - const: spdif0_rx + - const: spdif1_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + - const: sai4_rx_bclk + - const: sai5_tx_bclk + - const: sai6_rx_bclk + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8dxl-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 13 + maxItems: 13 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: spdif0_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + clock-controller@59e00000 { + compatible = "fsl,imx8qxp-acm"; + reg = <0x59e00000 0x1d0000>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_ASRC_1>, + <&pd IMX_SC_R_ESAI_0>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SAI_4>, + <&pd IMX_SC_R_SAI_5>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_esai0_rx_clk>, + <&clk_esai0_rx_hf_clk>, + <&clk_esai0_tx_clk>, + <&clk_esai0_tx_hf_clk>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>, + <&clk_sai4_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "esai0_rx_clk", + "esai0_rx_hf_clk", + "esai0_tx_clk", + "esai0_tx_hf_clk", + "spdif0_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk", + "sai4_rx_bclk"; + }; diff --git a/dts/Bindings/clock/hix5hd2-clock.txt b/dts/Bindings/clock/hix5hd2-clock.txt deleted file mode 100644 index 4733e58e49..0000000000 --- a/dts/Bindings/clock/hix5hd2-clock.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Hisilicon Hix5hd2 Clock Controller - -The hix5hd2 clock controller generates and supplies clock to various -controllers within the hix5hd2 SoC. - -Required Properties: - -- compatible: should be "hisilicon,hix5hd2-clock" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>. - -Examples: - clock: clock@f8a22000 { - compatible = "hisilicon,hix5hd2-clock"; - reg = <0xf8a22000 0x1000>; - #clock-cells = <1>; - }; - - uart0: uart@f8b00000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xf8b00000 0x1000>; - interrupts = <0 49 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; - }; diff --git a/dts/Bindings/clock/intel,agilex5-clkmgr.yaml b/dts/Bindings/clock/intel,agilex5-clkmgr.yaml new file mode 100644 index 0000000000..d120b0da7f --- /dev/null +++ b/dts/Bindings/clock/intel,agilex5-clkmgr.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,agilex5-clkmgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Agilex5 clock manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: + The Intel Agilex5 Clock Manager is an integrated clock controller, which + generates and supplies clock to all the modules. + +properties: + compatible: + const: intel,agilex5-clkmgr + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clkmgr: clock-controller@10d10000 { + compatible = "intel,agilex5-clkmgr"; + reg = <0x10d10000 0x1000>; + #clock-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/keystone-pll.txt b/dts/Bindings/clock/keystone-pll.txt index 47570d2072..9a3fbc6656 100644 --- a/dts/Bindings/clock/keystone-pll.txt +++ b/dts/Bindings/clock/keystone-pll.txt @@ -14,7 +14,7 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" - clocks : parent clock phandle -- reg - pll control0 and pll multipler registers +- reg - pll control0 and pll multiplier registers - reg-names : control, multiplier and post-divider. The multiplier and post-divider registers are applicable only for main pll clock - fixed-postdiv : fixed post divider value. If absent, use clkod register bits diff --git a/dts/Bindings/clock/lpc1850-ccu.txt b/dts/Bindings/clock/lpc1850-ccu.txt index fa97c12014..8cf8f0ecdd 100644 --- a/dts/Bindings/clock/lpc1850-ccu.txt +++ b/dts/Bindings/clock/lpc1850-ccu.txt @@ -68,7 +68,7 @@ soc { "base_ssp0_clk", "base_sdio_clk"; }; - /* A user of CCU brach clocks */ + /* A user of CCU branch clocks */ uart1: serial@40082000 { ... clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; diff --git a/dts/Bindings/clock/lpc1850-creg-clk.txt b/dts/Bindings/clock/lpc1850-creg-clk.txt index 6f1c7b4e4d..b6b2547a3d 100644 --- a/dts/Bindings/clock/lpc1850-creg-clk.txt +++ b/dts/Bindings/clock/lpc1850-creg-clk.txt @@ -5,8 +5,8 @@ control registers for two low speed clocks. One of the clocks is a 32 kHz oscillator driver with power up/down and clock gating. Next is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. -These clocks are used by the RTC and the Event Router peripherials. -The 32 kHz can also be routed to other peripherials to enable low +These clocks are used by the RTC and the Event Router peripherals. +The 32 kHz can also be routed to other peripherals to enable low power modes. This binding uses the common clock binding: diff --git a/dts/Bindings/clock/maxim,max9485.txt b/dts/Bindings/clock/maxim,max9485.txt index 61bec1100a..b8f5c3bbf1 100644 --- a/dts/Bindings/clock/maxim,max9485.txt +++ b/dts/Bindings/clock/maxim,max9485.txt @@ -12,7 +12,7 @@ requests. Required properties: - compatible: "maxim,max9485" -- clocks: Input clock, must provice 27.000 MHz +- clocks: Input clock, must provide 27.000 MHz - clock-names: Must be set to "xclk" - #clock-cells: From common clock binding; shall be set to 1 diff --git a/dts/Bindings/clock/nvidia,tegra124-car.yaml b/dts/Bindings/clock/nvidia,tegra124-car.yaml index 1b2181f6d4..a9ba21144a 100644 --- a/dts/Bindings/clock/nvidia,tegra124-car.yaml +++ b/dts/Bindings/clock/nvidia,tegra124-car.yaml @@ -27,7 +27,9 @@ description: | properties: compatible: - const: nvidia,tegra124-car + enum: + - nvidia,tegra124-car + - nvidia,tegra132-car reg: maxItems: 1 diff --git a/dts/Bindings/clock/oxnas,stdclk.txt b/dts/Bindings/clock/oxnas,stdclk.txt deleted file mode 100644 index b652f3fb77..0000000000 --- a/dts/Bindings/clock/oxnas,stdclk.txt +++ /dev/null @@ -1,28 +0,0 @@ -Oxford Semiconductor OXNAS SoC Family Standard Clocks -================================================ - -Please also refer to clock-bindings.txt in this directory for common clock -bindings usage. - -Required properties: -- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk" - For OX820, should be "oxsemi,ox820-stdclk" -- #clock-cells: 1, see below - -Parent node should have the following properties : -- compatible: For OX810SE, should be - "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - For OX820, should be - "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" - -example: - -sys: sys-ctrl@000000 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; -}; diff --git a/dts/Bindings/clock/qcom,dispcc-sm6125.yaml b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml index 8a210c4c5f..0a3ef7fd03 100644 --- a/dts/Bindings/clock/qcom,dispcc-sm6125.yaml +++ b/dts/Bindings/clock/qcom,dispcc-sm6125.yaml @@ -29,6 +29,7 @@ properties: - description: Link clock from DP PHY - description: VCO DIV clock from DP PHY - description: AHB config clock from GCC + - description: GPLL0 div source from GCC clock-names: items: @@ -39,6 +40,7 @@ properties: - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - const: cfg_ahb_clk + - const: gcc_disp_gpll0_div_clk_src '#clock-cells': const: 1 @@ -46,6 +48,16 @@ properties: '#power-domain-cells': const: 1 + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + reg: maxItems: 1 @@ -63,23 +75,31 @@ examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@5f00000 { compatible = "qcom,sm6125-dispcc"; reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&dsi0_phy 0>, <&dsi0_phy 1>, <&dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>, - <&gcc GCC_DISP_AHB_CLK>; + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk", - "cfg_ahb_clk"; + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmhpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; diff --git a/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml b/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml index d6774db257..59cc88a52f 100644 --- a/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/dts/Bindings/clock/qcom,dispcc-sm8x50.yaml @@ -82,7 +82,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0x0af00000 0x10000>; @@ -103,7 +103,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml index 09cd7a7868..19211176ee 100644 --- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml +++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-ipq4019.yaml b/dts/Bindings/clock/qcom,gcc-ipq4019.yaml index 6ebaef2288..fb3957d485 100644 --- a/dts/Bindings/clock/qcom,gcc-ipq4019.yaml +++ b/dts/Bindings/clock/qcom,gcc-ipq4019.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on IPQ4019 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> - Robert Marko <robert.markoo@sartura.hr> description: | diff --git a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml index deef398a98..52e7831a8d 100644 --- a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml +++ b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on IPQ8074 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-msm8976.yaml b/dts/Bindings/clock/qcom,gcc-msm8976.yaml index d2186e25f5..62d6f1fe12 100644 --- a/dts/Bindings/clock/qcom,gcc-msm8976.yaml +++ b/dts/Bindings/clock/qcom,gcc-msm8976.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8976 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-msm8996.yaml b/dts/Bindings/clock/qcom,gcc-msm8996.yaml index f77036ace3..97523cc1ec 100644 --- a/dts/Bindings/clock/qcom,gcc-msm8996.yaml +++ b/dts/Bindings/clock/qcom,gcc-msm8996.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8996 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module which provides the clocks, resets and diff --git a/dts/Bindings/clock/qcom,gcc-msm8998.yaml b/dts/Bindings/clock/qcom,gcc-msm8998.yaml index 3c9729050d..58f7fb22c5 100644 --- a/dts/Bindings/clock/qcom,gcc-msm8998.yaml +++ b/dts/Bindings/clock/qcom,gcc-msm8998.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8998 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-other.yaml b/dts/Bindings/clock/qcom,gcc-other.yaml index ba969e7a57..559fc21435 100644 --- a/dts/Bindings/clock/qcom,gcc-other.yaml +++ b/dts/Bindings/clock/qcom,gcc-other.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power @@ -19,8 +19,6 @@ description: | include/dt-bindings/reset/qcom,gcc-ipq6018.h include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h - include/dt-bindings/clock/qcom,gcc-mdm9615.h - include/dt-bindings/reset/qcom,gcc-mdm9615.h allOf: - $ref: qcom,gcc.yaml# @@ -30,7 +28,6 @@ properties: enum: - qcom,gcc-ipq6018 - qcom,gcc-mdm9607 - - qcom,gcc-mdm9615 required: - compatible diff --git a/dts/Bindings/clock/qcom,gcc-qcs404.yaml b/dts/Bindings/clock/qcom,gcc-qcs404.yaml index b2256f81b2..7bc6c57e4d 100644 --- a/dts/Bindings/clock/qcom,gcc-qcs404.yaml +++ b/dts/Bindings/clock/qcom,gcc-qcs404.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on QCS404 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/Bindings/clock/qcom,gcc-sc7180.yaml index 8bf9b6f495..7aae21a766 100644 --- a/dts/Bindings/clock/qcom,gcc-sc7180.yaml +++ b/dts/Bindings/clock/qcom,gcc-sc7180.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SC7180 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sc7280.yaml b/dts/Bindings/clock/qcom,gcc-sc7280.yaml index ff0b18bbb0..c4ca08d9ad 100644 --- a/dts/Bindings/clock/qcom,gcc-sc7280.yaml +++ b/dts/Bindings/clock/qcom,gcc-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sdm845.yaml b/dts/Bindings/clock/qcom,gcc-sdm845.yaml index 68e1b7822f..0595da0e8a 100644 --- a/dts/Bindings/clock/qcom,gcc-sdm845.yaml +++ b/dts/Bindings/clock/qcom,gcc-sdm845.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/Bindings/clock/qcom,gcc-sm8150.yaml index 3ea0ff37a4..58ccb7df84 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8150.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8150.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SM8150 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sm8250.yaml b/dts/Bindings/clock/qcom,gcc-sm8250.yaml index ead6665b9a..5d77c092be 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8250.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8250.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SM8250 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,gcc-sm8450.yaml b/dts/Bindings/clock/qcom,gcc-sm8450.yaml index 9a31981fbe..75259f468d 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8450.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8450.yaml @@ -25,7 +25,7 @@ properties: - description: Sleep clock source - description: PCIE 0 Pipe clock source (Optional clock) - description: PCIE 1 Pipe clock source (Optional clock) - - description: PCIE 1 Phy Auxillary clock source (Optional clock) + - description: PCIE 1 Phy Auxiliary clock source (Optional clock) - description: UFS Phy Rx symbol 0 clock source (Optional clock) - description: UFS Phy Rx symbol 1 clock source (Optional clock) - description: UFS Phy Tx symbol 0 clock source (Optional clock) diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml index 7129fbcf2b..788825105f 100644 --- a/dts/Bindings/clock/qcom,gcc.yaml +++ b/dts/Bindings/clock/qcom,gcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller Common Properties maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Common bindings for Qualcomm global clock control module providing the diff --git a/dts/Bindings/clock/qcom,gpucc.yaml b/dts/Bindings/clock/qcom,gpucc.yaml index a00216b3b1..f369fa34e0 100644 --- a/dts/Bindings/clock/qcom,gpucc.yaml +++ b/dts/Bindings/clock/qcom,gpucc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Graphics Clock & Reset Controller maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm graphics clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,ipq5018-gcc.yaml b/dts/Bindings/clock/qcom,ipq5018-gcc.yaml new file mode 100644 index 0000000000..ef84a0c95f --- /dev/null +++ b/dts/Bindings/clock/qcom,ipq5018-gcc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq5018-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on IPQ5018 + +maintainers: + - Sricharan Ramabadhran <quic_srichara@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on IPQ5018 + + See also:: + include/dt-bindings/clock/qcom,ipq5018-gcc.h + include/dt-bindings/reset/qcom,ipq5018-gcc.h + +properties: + compatible: + const: qcom,gcc-ipq5018 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE20 PHY0 pipe clock source + - description: PCIE20 PHY1 pipe clock source + - description: USB3 PHY pipe clock source + - description: GEPHY RX clock source + - description: GEPHY TX clock source + - description: UNIPHY RX clock source + - description: UNIPHY TX clk source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-ipq5018"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&pcie20_phy0_pipe_clk>, + <&pcie20_phy1_pipe_clk>, + <&usb3_phy0_pipe_clk>, + <&gephy_rx_clk>, + <&gephy_tx_clk>, + <&uniphy_rx_clk>, + <&uniphy_tx_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,kpss-acc-v1.yaml b/dts/Bindings/clock/qcom,kpss-acc-v1.yaml index a466e4e8aa..57632757d4 100644 --- a/dts/Bindings/clock/qcom,kpss-acc-v1.yaml +++ b/dts/Bindings/clock/qcom,kpss-acc-v1.yaml @@ -14,7 +14,7 @@ description: There is one ACC register region per CPU within the KPSS remapped region as well as an alias register region that remaps accesses to the ACC associated with the CPU accessing the region. ACC v1 is currently used as a - clock-controller for enabling the cpu and hanling the aux clocks. + clock-controller for enabling the cpu and handling the aux clocks. properties: compatible: diff --git a/dts/Bindings/clock/qcom,lcc.yaml b/dts/Bindings/clock/qcom,lcc.yaml index 8c783823e9..55985e562a 100644 --- a/dts/Bindings/clock/qcom,lcc.yaml +++ b/dts/Bindings/clock/qcom,lcc.yaml @@ -76,6 +76,40 @@ allOf: - clocks - clock-names + - if: + properties: + compatible: + contains: + enum: + - qcom,lcc-mdm9615 + then: + properties: + clocks: + items: + - description: Board CXO source + - description: PLL 4 Vote clock + - description: MI2S codec clock + - description: Mic I2S codec clock + - description: Mic I2S spare clock + - description: Speaker I2S codec clock + - description: Speaker I2S spare clock + - description: PCM codec clock + + clock-names: + items: + - const: cxo + - const: pll4_vote + - const: mi2s_codec_clk + - const: codec_i2s_mic_codec_clk + - const: spare_i2s_mic_codec_clk + - const: codec_i2s_spkr_codec_clk + - const: spare_i2s_spkr_codec_clk + - const: pcm_codec_clk + + required: + - clocks + - clock-names + examples: - | clock-controller@28000000 { diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml index 422f5776a7..aa35a40648 100644 --- a/dts/Bindings/clock/qcom,mmcc.yaml +++ b/dts/Bindings/clock/qcom,mmcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm Multimedia Clock & Reset Controller maintainers: - Jeffrey Hugo <quic_jhugo@quicinc.com> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm multimedia clock control module provides the clocks, resets and @@ -297,6 +297,7 @@ allOf: - description: HDMI phy PLL clock - description: DisplayPort phy PLL link clock - description: DisplayPort phy PLL vco clock + - description: Global PLL 0 DIV clock clock-names: items: @@ -309,6 +310,7 @@ allOf: - const: hdmipll - const: dplink - const: dpvco + - const: gpll0_div - if: properties: diff --git a/dts/Bindings/clock/qcom,msm8996-cbf.yaml b/dts/Bindings/clock/qcom,msm8996-cbf.yaml index 3ffe69d8cd..0dfbd8c4d4 100644 --- a/dts/Bindings/clock/qcom,msm8996-cbf.yaml +++ b/dts/Bindings/clock/qcom,msm8996-cbf.yaml @@ -15,7 +15,9 @@ description: > properties: compatible: - const: qcom,msm8996-cbf + enum: + - qcom,msm8996-cbf + - qcom,msm8996pro-cbf reg: maxItems: 1 diff --git a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml index 2d88979916..7b271ae210 100644 --- a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml +++ b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Graphics Clock & Reset Controller on MSM8998 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm graphics clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,qdu1000-gcc.yaml b/dts/Bindings/clock/qcom,qdu1000-gcc.yaml index 767a9d03aa..d712b1a87e 100644 --- a/dts/Bindings/clock/qcom,qdu1000-gcc.yaml +++ b/dts/Bindings/clock/qcom,qdu1000-gcc.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000 maintainers: - - Melody Olvera <quic_molvera@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + - Imran Shaik <quic_imrashai@quicinc.com> description: | Qualcomm global clock control module which supports the clocks, resets and diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml index 267cf8c268..fd14d18309 100644 --- a/dts/Bindings/clock/qcom,rpmhcc.yaml +++ b/dts/Bindings/clock/qcom,rpmhcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. RPMh Clocks maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Resource Power Manager Hardened (RPMh) manages shared resources on diff --git a/dts/Bindings/clock/qcom,sc7180-camcc.yaml b/dts/Bindings/clock/qcom,sc7180-camcc.yaml index 098c8acf4b..2dfc2a4f19 100644 --- a/dts/Bindings/clock/qcom,sc7180-camcc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-camcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Camera Clock & Reset Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm camera clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml index 95ad16d0ab..1c9ce300a4 100644 --- a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml index f297694ef8..fdfb389083 100644 --- a/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-lpasscorecc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core Clock Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core clock control module provides the clocks and power diff --git a/dts/Bindings/clock/qcom,sc7180-mss.yaml b/dts/Bindings/clock/qcom,sc7180-mss.yaml index 1e856a8a99..873a2f918b 100644 --- a/dts/Bindings/clock/qcom,sc7180-mss.yaml +++ b/dts/Bindings/clock/qcom,sc7180-mss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Modem Clock Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm modem clock control module provides the clocks on SC7180. diff --git a/dts/Bindings/clock/qcom,sc7280-camcc.yaml b/dts/Bindings/clock/qcom,sc7280-camcc.yaml index b60adbad45..01feef1cab 100644 --- a/dts/Bindings/clock/qcom,sc7280-camcc.yaml +++ b/dts/Bindings/clock/qcom,sc7280-camcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Camera Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm camera clock control module provides the clocks, resets and diff --git a/dts/Bindings/clock/qcom,sc7280-dispcc.yaml b/dts/Bindings/clock/qcom,sc7280-dispcc.yaml index cfe6594a0a..c42b0ef613 100644 --- a/dts/Bindings/clock/qcom,sc7280-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sc7280-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml index 97c6bd96e0..f44c5c130d 100644 --- a/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml +++ b/dts/Bindings/clock/qcom,sc7280-lpasscc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core Clock Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core clock control module provides the clocks and power diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml index 447cdc447a..deee5423d6 100644 --- a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml +++ b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core & Audio Clock Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core and audio clock control module provides the clocks and diff --git a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml index 76b53ce64e..719844d7ea 100644 --- a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SDM845 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/dts/Bindings/clock/qcom,sm8350-videocc.yaml b/dts/Bindings/clock/qcom,sm8350-videocc.yaml index 23505c8c3d..46d1d91e3a 100644 --- a/dts/Bindings/clock/qcom,sm8350-videocc.yaml +++ b/dts/Bindings/clock/qcom,sm8350-videocc.yaml @@ -19,7 +19,9 @@ description: | properties: compatible: - const: qcom,sm8350-videocc + enum: + - qcom,sc8280xp-videocc + - qcom,sm8350-videocc clocks: items: @@ -51,7 +53,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@abf0000 { compatible = "qcom,sm8350-videocc"; @@ -59,7 +61,7 @@ examples: clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/Bindings/clock/qcom,sm8450-camcc.yaml b/dts/Bindings/clock/qcom,sm8450-camcc.yaml index 87ae741668..8178c35bc3 100644 --- a/dts/Bindings/clock/qcom,sm8450-camcc.yaml +++ b/dts/Bindings/clock/qcom,sm8450-camcc.yaml @@ -64,7 +64,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ade0000 { compatible = "qcom,sm8450-camcc"; reg = <0xade0000 0x20000>; @@ -72,7 +72,7 @@ examples: <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/Bindings/clock/qcom,sm8450-dispcc.yaml b/dts/Bindings/clock/qcom,sm8450-dispcc.yaml index 1dd1f696dc..2f22310b08 100644 --- a/dts/Bindings/clock/qcom,sm8450-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sm8450-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8450-dispcc"; reg = <0x0af00000 0x10000>; @@ -91,7 +91,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/dts/Bindings/clock/qcom,sm8450-videocc.yaml b/dts/Bindings/clock/qcom,sm8450-videocc.yaml index f1c6dd50f1..bad8f019a8 100644 --- a/dts/Bindings/clock/qcom,sm8450-videocc.yaml +++ b/dts/Bindings/clock/qcom,sm8450-videocc.yaml @@ -64,13 +64,13 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> videocc: clock-controller@aaf0000 { compatible = "qcom,sm8450-videocc"; reg = <0x0aaf0000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_VIDEO_AHB_CLK>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/dts/Bindings/clock/qcom,sm8550-dispcc.yaml b/dts/Bindings/clock/qcom,sm8550-dispcc.yaml index ab25f7cbaa..c129f8c16b 100644 --- a/dts/Bindings/clock/qcom,sm8550-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sm8550-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8550-dispcc"; reg = <0x0af00000 0x10000>; @@ -99,7 +99,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/dts/Bindings/clock/qcom,videocc.yaml b/dts/Bindings/clock/qcom,videocc.yaml index 2b07146161..6999e36ace 100644 --- a/dts/Bindings/clock/qcom,videocc.yaml +++ b/dts/Bindings/clock/qcom,videocc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Video Clock & Reset Controller maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm video clock control module provides the clocks, resets and power @@ -124,7 +124,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0x0ab00000 0x10000>; @@ -133,7 +133,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/dts/Bindings/clock/renesas,5p35023.yaml b/dts/Bindings/clock/renesas,5p35023.yaml new file mode 100644 index 0000000000..839648e753 --- /dev/null +++ b/dts/Bindings/clock/renesas,5p35023.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The 5P35023 is a VersaClock programmable clock generator and + is designed for low-power, consumer, and high-performance PCI + express applications. The 5P35023 device is a three PLL + architecture design, and each PLL is individually programmable + and allowing for up to 6 unique frequency outputs. + + An internal OTP memory allows the user to store the configuration + in the device. After power up, the user can change the device register + settings through the I2C interface when I2C mode is selected. + + The driver can read a full register map from the DT, and will use that + register map to initialize the attached part (via I2C) when the system + boots. Any configuration not supported by the common clock framework + must be done via the full register map, including optimized settings. + + Link to datasheet: + https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator + +properties: + compatible: + enum: + - renesas,5p35023 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + renesas,settings: + description: Optional, complete register map of the device. + Optimized settings for the device must be provided in full + and are written during initialization. + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 37 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + + clocks = <&x1_x2>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <12288000>, <25000000>, + <12000000>, <11289600>, + <11289600>, <24000000>; + }; + }; diff --git a/dts/Bindings/clock/sprd,sc9863a-clk.yaml b/dts/Bindings/clock/sprd,sc9863a-clk.yaml index 1703e305e6..a0658056c3 100644 --- a/dts/Bindings/clock/sprd,sc9863a-clk.yaml +++ b/dts/Bindings/clock/sprd,sc9863a-clk.yaml @@ -66,7 +66,7 @@ then: else: description: | Other SC9863a clock nodes should be the child of a syscon node in - which compatible string shoule be: + which compatible string should be: "sprd,sc9863a-glbregs", "syscon", "simple-mfd" The 'reg' property for the clock node is also required if there is a sub diff --git a/dts/Bindings/clock/starfive,jh7110-ispcrg.yaml b/dts/Bindings/clock/starfive,jh7110-ispcrg.yaml new file mode 100644 index 0000000000..3b8b85be5c --- /dev/null +++ b/dts/Bindings/clock/starfive,jh7110-ispcrg.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-ispcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + - description: external DVP + + clock-names: + items: + - const: isp_top_core + - const: isp_top_axi + - const: noc_bus_isp_axi + - const: dvp_clk + + resets: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + ISP domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + ispcrg: clock-controller@19810000 { + compatible = "starfive,jh7110-ispcrg"; + reg = <0x19810000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>, + <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>, + <&dvp_clk>; + clock-names = "isp_top_core", "isp_top_axi", + "noc_bus_isp_axi", "dvp_clk"; + resets = <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>, + <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_ISP>; + }; diff --git a/dts/Bindings/clock/starfive,jh7110-pll.yaml b/dts/Bindings/clock/starfive,jh7110-pll.yaml new file mode 100644 index 0000000000..be8300ce86 --- /dev/null +++ b/dts/Bindings/clock/starfive,jh7110-pll.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PLL Clock Generator + +description: + These PLLs are high speed, low jitter frequency synthesizers in the JH7110. + Each PLL works in integer mode or fraction mode, with configuration + registers in the sys syscon. So the PLLs node should be a child of + SYS-SYSCON node. + The formula for calculating frequency is + Fvco = Fref * (NI + NF) / M / Q1 + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-pll + + clocks: + maxItems: 1 + description: Main Oscillator (24 MHz) + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/starfive,jh7110-stgcrg.yaml b/dts/Bindings/clock/starfive,jh7110-stgcrg.yaml new file mode 100644 index 0000000000..b64ccd8420 --- /dev/null +++ b/dts/Bindings/clock/starfive,jh7110-stgcrg.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 System-Top-Group Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-stgcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Main Oscillator (24 MHz) + - description: HIFI4 core + - description: STG AXI/AHB + - description: USB (125 MHz) + - description: CPU Bus + - description: HIFI4 Axi + - description: NOC STG Bus + - description: APB Bus + + clock-names: + items: + - const: osc + - const: hifi4_core + - const: stg_axiahb + - const: usb_125m + - const: cpu_bus + - const: hifi4_axi + - const: nocstg_bus + - const: apb_bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + + stgcrg: clock-controller@10230000 { + compatible = "starfive,jh7110-stgcrg"; + reg = <0x10230000 0x10000>; + clocks = <&osc>, + <&syscrg JH7110_SYSCLK_HIFI4_CORE>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_USB_125M>, + <&syscrg JH7110_SYSCLK_CPU_BUS>, + <&syscrg JH7110_SYSCLK_HIFI4_AXI>, + <&syscrg JH7110_SYSCLK_NOCSTG_BUS>, + <&syscrg JH7110_SYSCLK_APB_BUS>; + clock-names = "osc", "hifi4_core", + "stg_axiahb", "usb_125m", + "cpu_bus", "hifi4_axi", + "nocstg_bus", "apb_bus"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/starfive,jh7110-syscrg.yaml b/dts/Bindings/clock/starfive,jh7110-syscrg.yaml index 84373ae316..5ba0a885aa 100644 --- a/dts/Bindings/clock/starfive,jh7110-syscrg.yaml +++ b/dts/Bindings/clock/starfive,jh7110-syscrg.yaml @@ -27,6 +27,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 - items: - description: Main Oscillator (24 MHz) @@ -38,6 +41,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 clock-names: oneOf: @@ -52,6 +58,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out - items: - const: osc @@ -63,6 +72,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out '#clock-cells': const: 1 @@ -93,12 +105,14 @@ examples: <&gmac1_rgmii_rxin>, <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, - <&tdm_ext>, <&mclk_ext>; + <&tdm_ext>, <&mclk_ext>, + <&pllclk 0>, <&pllclk 1>, <&pllclk 2>; clock-names = "osc", "gmac1_rmii_refin", "gmac1_rgmii_rxin", "i2stx_bclk_ext", "i2stx_lrck_ext", "i2srx_bclk_ext", "i2srx_lrck_ext", - "tdm_ext", "mclk_ext"; + "tdm_ext", "mclk_ext", + "pll0_out", "pll1_out", "pll2_out"; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/dts/Bindings/clock/starfive,jh7110-voutcrg.yaml b/dts/Bindings/clock/starfive,jh7110-voutcrg.yaml new file mode 100644 index 0000000000..af77bd8c86 --- /dev/null +++ b/dts/Bindings/clock/starfive,jh7110-voutcrg.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Video-Output Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-voutcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Vout Top core + - description: Vout Top Ahb + - description: Vout Top Axi + - description: Vout Top HDMI MCLK + - description: I2STX0 BCLK + - description: external HDMI pixel + + clock-names: + items: + - const: vout_src + - const: vout_top_ahb + - const: vout_top_axi + - const: vout_top_hdmitx0_mclk + - const: i2stx0_bclk + - const: hdmitx0_pixelclk + + resets: + maxItems: 1 + description: Vout Top core + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + Vout domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + voutcrg: clock-controller@295C0000 { + compatible = "starfive,jh7110-voutcrg"; + reg = <0x295C0000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>, + <&syscrg JH7110_SYSCLK_I2STX0_BCLK>, + <&hdmitx0_pixelclk>; + clock-names = "vout_src", "vout_top_ahb", + "vout_top_axi", "vout_top_hdmitx0_mclk", + "i2stx0_bclk", "hdmitx0_pixelclk"; + resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_VOUT>; + }; diff --git a/dts/Bindings/clock/ti,cdce925.yaml b/dts/Bindings/clock/ti,cdce925.yaml index a4ec8dd5dd..95c1c6f8b7 100644 --- a/dts/Bindings/clock/ti,cdce925.yaml +++ b/dts/Bindings/clock/ti,cdce925.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,cdce925.yaml# diff --git a/dts/Bindings/clock/ti,sci-clk.yaml b/dts/Bindings/clock/ti,sci-clk.yaml index 63d9763416..0a9d6a4c4b 100644 --- a/dts/Bindings/clock/ti,sci-clk.yaml +++ b/dts/Bindings/clock/ti,sci-clk.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml# diff --git a/dts/Bindings/clock/ti/mux.txt b/dts/Bindings/clock/ti/mux.txt index e17425a586..b33f641f10 100644 --- a/dts/Bindings/clock/ti/mux.txt +++ b/dts/Bindings/clock/ti/mux.txt @@ -8,7 +8,7 @@ parents, one of which can be selected as output. This clock does not gate or adjust the parent rate via a divider or multiplier. By default the "clocks" property lists the parents in the same order -as they are programmed into the regster. E.g: +as they are programmed into the register. E.g: clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; diff --git a/dts/Bindings/clock/vf610-clock.txt b/dts/Bindings/clock/vf610-clock.txt index 63f9f1ac34..109ffa3a5b 100644 --- a/dts/Bindings/clock/vf610-clock.txt +++ b/dts/Bindings/clock/vf610-clock.txt @@ -9,7 +9,7 @@ Optional properties: - clocks: list of clock identifiers which are external input clocks to the given clock controller. Please refer the next section to find the input clocks for a given controller. -- clock-names: list of names of clocks which are exteral input clocks to the +- clock-names: list of names of clocks which are external input clocks to the given clock controller. Input clocks for top clock controller: diff --git a/dts/Bindings/clock/xlnx,versal-clk.yaml b/dts/Bindings/clock/xlnx,versal-clk.yaml index 5cbb34d0b6..1ba687d433 100644 --- a/dts/Bindings/clock/xlnx,versal-clk.yaml +++ b/dts/Bindings/clock/xlnx,versal-clk.yaml @@ -14,11 +14,16 @@ description: | reads required input clock frequencies from the devicetree and acts as clock provider for all clock consumers of PS clocks. -select: false - properties: compatible: - const: xlnx,versal-clk + oneOf: + - enum: + - xlnx,versal-clk + - xlnx,zynqmp-clk + - items: + - enum: + - xlnx,versal-net-clk + - const: xlnx,versal-clk "#clock-cells": const: 1 @@ -26,16 +31,12 @@ properties: clocks: description: List of clock specifiers which are external input clocks to the given clock controller. - items: - - description: reference clock - - description: alternate reference clock - - description: alternate reference clock for programmable logic + minItems: 3 + maxItems: 8 clock-names: - items: - - const: ref - - const: alt_ref - - const: pl_alt_ref + minItems: 3 + maxItems: 8 required: - compatible @@ -45,6 +46,61 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,versal-clk + + then: + properties: + clocks: + items: + - description: reference clock + - description: alternate reference clock + - description: alternate reference clock for programmable logic + + clock-names: + items: + - const: ref + - const: alt_ref + - const: pl_alt_ref + + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-clk + + then: + properties: + clocks: + minItems: 5 + items: + - description: PS reference clock + - description: reference clock for video system + - description: alternative PS reference clock + - description: auxiliary reference clock + - description: transceiver reference clock + - description: (E)MIO clock source (Optional clock) + - description: GEM emio clock (Optional clock) + - description: Watchdog external clock (Optional clock) + + clock-names: + minItems: 5 + items: + - const: pss_ref_clk + - const: video_clk + - const: pss_alt_ref_clk + - const: aux_ref_clk + - const: gt_crx_ref_clk + - pattern: "^mio_clk[00-77]+.*$" + - pattern: "gem[0-3]+_emio_clk.*$" + - pattern: "swdt[0-1]+_ext_clk.*$" + examples: - | firmware { @@ -59,4 +115,13 @@ examples: }; }; }; + + clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, + <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", + "aux_ref_clk", "gt_crx_ref_clk"; + }; ... diff --git a/dts/Bindings/clock/xlnx,zynqmp-clk.txt b/dts/Bindings/clock/xlnx,zynqmp-clk.txt deleted file mode 100644 index 391ee1a60b..0000000000 --- a/dts/Bindings/clock/xlnx,zynqmp-clk.txt +++ /dev/null @@ -1,63 +0,0 @@ --------------------------------------------------------------------------- -Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using -Zynq MPSoC firmware interface --------------------------------------------------------------------------- -The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock -tree. It reads required input clock frequencies from the devicetree and acts -as clock provider for all clock consumers of PS clocks. - -See clock_bindings.txt for more information on the generic clock bindings. - -Required properties: - - #clock-cells: Must be 1 - - compatible: Must contain: "xlnx,zynqmp-clk" - - clocks: List of clock specifiers which are external input - clocks to the given clock controller. Please refer - the next section to find the input clocks for a - given controller. - - clock-names: List of clock names which are exteral input clocks - to the given clock controller. Please refer to the - clock bindings for more details. - -Input clocks for zynqmp Ultrascale+ clock controller: - -The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock -inputs. These required clock inputs are: - - pss_ref_clk (PS reference clock) - - video_clk (reference clock for video system ) - - pss_alt_ref_clk (alternative PS reference clock) - - aux_ref_clk - - gt_crx_ref_clk (transceiver reference clock) - -The following strings are optional parameters to the 'clock-names' property in -order to provide an optional (E)MIO clock source: - - swdt0_ext_clk - - swdt1_ext_clk - - gem0_emio_clk - - gem1_emio_clk - - gem2_emio_clk - - gem3_emio_clk - - mio_clk_XX # with XX = 00..77 - - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 - - -Output clocks are registered based on clock information received -from firmware. Output clocks indexes are mentioned in -include/dt-bindings/clock/xlnx-zynqmp-clk.h. - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; - clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; - }; - }; -}; diff --git a/dts/Bindings/connector/usb-connector.yaml b/dts/Bindings/connector/usb-connector.yaml index 1c4d3eb877..7c8a3e8430 100644 --- a/dts/Bindings/connector/usb-connector.yaml +++ b/dts/Bindings/connector/usb-connector.yaml @@ -30,6 +30,9 @@ properties: - const: samsung,usb-connector-11pin - const: usb-b-connector + reg: + maxItems: 1 + label: description: Symbolic name for the connector. @@ -224,13 +227,13 @@ properties: state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W - 5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during - SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during + SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during SNK_READY for non-pd link. type: boolean dependencies: - sink-vdos-v1: [ 'sink-vdos' ] - sink-vdos: [ 'sink-vdos-v1' ] + sink-vdos-v1: [ sink-vdos ] + sink-vdos: [ sink-vdos-v1 ] required: - compatible @@ -264,7 +267,7 @@ anyOf: - typec-power-opmode - new-source-frs-typec-current -additionalProperties: true +additionalProperties: false examples: # Micro-USB connector with HS lines routed via controller (MUIC). diff --git a/dts/Bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml b/dts/Bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml new file mode 100644 index 0000000000..16a4489745 --- /dev/null +++ b/dts/Bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpu/nvidia,tegra186-ccplex-cluster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 CCPLEX Cluster + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra186-ccplex-cluster + + reg: + maxItems: 1 + + nvidia,bpmp: + description: phandle to the BPMP used to query CPU frequency tables + $ref: /schemas/types.yaml#/definitions/phandle + +additionalProperties: false + +required: + - compatible + - reg + - nvidia,bpmp + +examples: + - | + ccplex@e000000 { + compatible = "nvidia,tegra186-ccplex-cluster"; + reg = <0x0e000000 0x400000>; + nvidia,bpmp = <&bpmp>; + }; diff --git a/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml b/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml index a6b3bb8fdf..c1d225fcf2 100644 --- a/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/dts/Bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -49,6 +49,7 @@ properties: - description: Frequency domain 0 register region - description: Frequency domain 1 register region - description: Frequency domain 2 register region + - description: Frequency domain 3 register region reg-names: minItems: 1 @@ -56,6 +57,7 @@ properties: - const: freq-domain0 - const: freq-domain1 - const: freq-domain2 + - const: freq-domain3 clocks: items: @@ -69,7 +71,7 @@ properties: interrupts: minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 @@ -77,6 +79,7 @@ properties: - const: dcvsh-irq-0 - const: dcvsh-irq-1 - const: dcvsh-irq-2 + - const: dcvsh-irq-3 '#freq-domain-cells': const: 1 diff --git a/dts/Bindings/cpufreq/ti-cpufreq.txt b/dts/Bindings/cpufreq/ti-cpufreq.txt deleted file mode 100644 index 1758051798..0000000000 --- a/dts/Bindings/cpufreq/ti-cpufreq.txt +++ /dev/null @@ -1,132 +0,0 @@ -TI CPUFreq and OPP bindings -================================ - -Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx -families support different OPPs depending on the silicon variant in use. -The ti-cpufreq driver can use revision and an efuse value from the SoC to -provide the OPP framework with supported hardware information. This is -used to determine which OPPs from the operating-points-v2 table get enabled -when it is parsed by the OPP framework. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, - omap34xx, omap36xx and am3517 SoCs -- syscon: A phandle pointing to a syscon node representing the control module - register space of the SoC. - -Optional properties: --------------------- -- "vdd-supply", "vbb-supply": to define two regulators for dra7xx -- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: Two bitfields indicating: - 1. Which revision of the SoC the OPP is supported by - 2. Which eFuse bits indicate this OPP is available - - A bitwise AND is performed against these values and if any bit - matches, the OPP gets enabled. - -Example: --------- - -/* From arch/arm/boot/dts/am33xx.dtsi */ -cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; -}; - -/* - * cpu0 has different OPPs depending on SoC revision and some on revisions - * 0x2 and 0x4 have eFuse bits that indicate if they are available or not - */ -cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because they can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; -}; diff --git a/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml b/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml index 92e1d76e29..7da9aa82d8 100644 --- a/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/dts/Bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - const: qcom,inline-crypto-engine diff --git a/dts/Bindings/crypto/qcom-qce.yaml b/dts/Bindings/crypto/qcom-qce.yaml index bb828068c3..8e665d910e 100644 --- a/dts/Bindings/crypto/qcom-qce.yaml +++ b/dts/Bindings/crypto/qcom-qce.yaml @@ -34,6 +34,7 @@ properties: - enum: - qcom,ipq6018-qce - qcom,ipq8074-qce + - qcom,ipq9574-qce - qcom,msm8996-qce - qcom,qcm2290-qce - qcom,sdm845-qce diff --git a/dts/Bindings/crypto/st,stm32-hash.yaml b/dts/Bindings/crypto/st,stm32-hash.yaml index b767ec72a9..ac480765cd 100644 --- a/dts/Bindings/crypto/st,stm32-hash.yaml +++ b/dts/Bindings/crypto/st,stm32-hash.yaml @@ -20,6 +20,7 @@ properties: - stericsson,ux500-hash - st,stm32f456-hash - st,stm32f756-hash + - st,stm32mp13-hash reg: maxItems: 1 diff --git a/dts/Bindings/crypto/ti,sa2ul.yaml b/dts/Bindings/crypto/ti,sa2ul.yaml index 77ec8bc70b..ff10a0838a 100644 --- a/dts/Bindings/crypto/ti,sa2ul.yaml +++ b/dts/Bindings/crypto/ti,sa2ul.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml# @@ -66,10 +66,22 @@ patternProperties: required: - compatible - reg - - power-domains - dmas - dma-names +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-sa3ul + then: + properties: + power-domains: false + else: + required: + - power-domains + additionalProperties: false examples: diff --git a/dts/Bindings/devfreq/event/samsung,exynos-ppmu.yaml b/dts/Bindings/devfreq/event/samsung,exynos-ppmu.yaml index e300df4b47..d27dcb2fef 100644 --- a/dts/Bindings/devfreq/event/samsung,exynos-ppmu.yaml +++ b/dts/Bindings/devfreq/event/samsung,exynos-ppmu.yaml @@ -18,7 +18,7 @@ description: | each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC). The Exynos PPMU driver uses the devfreq-event class to provide event data to various devfreq devices. The devfreq devices would use the event data when - derterming the current state of each IP. + determining the current state of each IP. properties: compatible: diff --git a/dts/Bindings/display/atmel/hlcdc-dc.txt b/dts/Bindings/display/atmel/hlcdc-dc.txt index 0398aec488..923aea2534 100644 --- a/dts/Bindings/display/atmel/hlcdc-dc.txt +++ b/dts/Bindings/display/atmel/hlcdc-dc.txt @@ -12,7 +12,7 @@ Required properties: Required children nodes: Children nodes are encoding available output ports and their connections - to external devices using the OF graph reprensentation (see ../graph.txt). + to external devices using the OF graph representation (see ../graph.txt). At least one port node is required. Optional properties in grandchild nodes: diff --git a/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml index 0b51c64f14..8747b95ec2 100644 --- a/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -11,7 +11,7 @@ maintainers: description: | This document defines device tree properties for the Synopsys DesignWare MIPI - DSI host controller. It doesn't constitue a device tree binding specification + DSI host controller. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by platform-specific device tree bindings. diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/Bindings/display/bridge/toshiba,tc358767.yaml index 0521261b04..ae894d996d 100644 --- a/dts/Bindings/display/bridge/toshiba,tc358767.yaml +++ b/dts/Bindings/display/bridge/toshiba,tc358767.yaml @@ -49,6 +49,9 @@ properties: description: | OF device-tree gpio specification for RSTX pin(active low system reset) + interrupts: + maxItems: 1 + toshiba,hpd-pin: $ref: /schemas/types.yaml#/definitions/uint32 enum: diff --git a/dts/Bindings/display/cirrus,clps711x-fb.txt b/dts/Bindings/display/cirrus,clps711x-fb.txt index 0ab5f06636..84c75f8498 100644 --- a/dts/Bindings/display/cirrus,clps711x-fb.txt +++ b/dts/Bindings/display/cirrus,clps711x-fb.txt @@ -1,4 +1,4 @@ -* Currus Logic CLPS711X Framebuffer +* Cirrus Logic CLPS711X Framebuffer Required properties: - compatible: Shall contain "cirrus,ep7209-fb". diff --git a/dts/Bindings/display/msm/dp-controller.yaml b/dts/Bindings/display/msm/dp-controller.yaml index 7a7cf3fb3e..f12558960c 100644 --- a/dts/Bindings/display/msm/dp-controller.yaml +++ b/dts/Bindings/display/msm/dp-controller.yaml @@ -28,6 +28,7 @@ properties: - qcom,sm8350-dp - items: - enum: + - qcom,sm8250-dp - qcom,sm8450-dp - qcom,sm8550-dp - const: qcom,sm8350-dp @@ -79,7 +80,8 @@ properties: operating-points-v2: true - opp-table: true + opp-table: + type: object power-domains: maxItems: 1 diff --git a/dts/Bindings/display/msm/dsi-controller-main.yaml b/dts/Bindings/display/msm/dsi-controller-main.yaml index 01848bdd58..c6dbab65d5 100644 --- a/dts/Bindings/display/msm/dsi-controller-main.yaml +++ b/dts/Bindings/display/msm/dsi-controller-main.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# @@ -27,6 +27,7 @@ properties: - qcom,sdm660-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl - qcom,sm6375-dsi-ctrl - qcom,sm8150-dsi-ctrl @@ -166,6 +167,10 @@ properties: description: Phandle to vdd regulator device node + refgen-supply: + description: + Phandle to REFGEN regulator device node + vcca-supply: description: Phandle to vdd regulator device node @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,msm8998-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl then: properties: diff --git a/dts/Bindings/display/msm/dsi-phy-10nm.yaml b/dts/Bindings/display/msm/dsi-phy-10nm.yaml index e6b00d7387..69d13867b7 100644 --- a/dts/Bindings/display/msm/dsi-phy-10nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-10nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml index a43e11d3b0..52bbe132e6 100644 --- a/dts/Bindings/display/msm/dsi-phy-14nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# @@ -19,6 +19,7 @@ properties: - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 + - qcom,sm6125-dsi-phy-14nm reg: items: @@ -35,6 +36,16 @@ properties: vcca-supply: description: Phandle to vcca regulator device node. + power-domains: + description: + A phandle and PM domain specifier for an optional power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/display/msm/dsi-phy-20nm.yaml b/dts/Bindings/display/msm/dsi-phy-20nm.yaml index 9c1f9140c7..7e6687cb00 100644 --- a/dts/Bindings/display/msm/dsi-phy-20nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-20nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# diff --git a/dts/Bindings/display/msm/dsi-phy-28nm.yaml b/dts/Bindings/display/msm/dsi-phy-28nm.yaml index 62fb3e484e..288d8babb7 100644 --- a/dts/Bindings/display/msm/dsi-phy-28nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-28nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# diff --git a/dts/Bindings/display/msm/dsi-phy-7nm.yaml b/dts/Bindings/display/msm/dsi-phy-7nm.yaml index 8e9031bbde..dd6619555a 100644 --- a/dts/Bindings/display/msm/dsi-phy-7nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-7nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml# diff --git a/dts/Bindings/display/msm/dsi-phy-common.yaml b/dts/Bindings/display/msm/dsi-phy-common.yaml index 0f6f08890e..6b57ce41c9 100644 --- a/dts/Bindings/display/msm/dsi-phy-common.yaml +++ b/dts/Bindings/display/msm/dsi-phy-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml index 58ca8912a8..56b9b247e8 100644 --- a/dts/Bindings/display/msm/gpu.yaml +++ b/dts/Bindings/display/msm/gpu.yaml @@ -15,6 +15,12 @@ properties: oneOf: - description: | The driver is parsing the compat string for Adreno to + figure out the chip-id. + items: + - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Adreno to figure out the gpu-id and patch level. items: - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' diff --git a/dts/Bindings/display/msm/mdss-common.yaml b/dts/Bindings/display/msm/mdss-common.yaml index ccd7d64175..f69196e4cc 100644 --- a/dts/Bindings/display/msm/mdss-common.yaml +++ b/dts/Bindings/display/msm/mdss-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# @@ -77,6 +77,12 @@ properties: items: - description: MDSS_CORE reset + memory-region: + maxItems: 1 + description: + Phandle to a node describing a reserved framebuffer memory region. + For example, the splash memory region set up by the bootloader. + required: - reg - reg-names diff --git a/dts/Bindings/display/msm/qcom,mdp5.yaml b/dts/Bindings/display/msm/qcom,mdp5.yaml index 2fe032d0e8..91c774f106 100644 --- a/dts/Bindings/display/msm/qcom,mdp5.yaml +++ b/dts/Bindings/display/msm/qcom,mdp5.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# diff --git a/dts/Bindings/display/msm/qcom,mdss.yaml b/dts/Bindings/display/msm/qcom,mdss.yaml index db9f07c614..0999ea07f4 100644 --- a/dts/Bindings/display/msm/qcom,mdss.yaml +++ b/dts/Bindings/display/msm/qcom,mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# @@ -11,7 +11,7 @@ maintainers: - Rob Clark <robdclark@gmail.com> description: - This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + This is the bindings documentation for the Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. properties: diff --git a/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml index 8d3cd46260..d5a64c8a92 100644 --- a/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml index 3c2b6ed98a..e320ab1de6 100644 --- a/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml index 414f4e7ebd..be6cd8adb3 100644 --- a/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml index 2995b84b2c..4184b84d4c 100644 --- a/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml index 630b114804..8137618237 100644 --- a/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# @@ -15,6 +15,7 @@ properties: compatible: enum: - qcom,sc7180-dpu + - qcom,sm6125-dpu - qcom,sm6350-dpu - qcom,sm6375-dpu @@ -63,7 +64,9 @@ allOf: - if: properties: compatible: - const: qcom,sm6375-dpu + enum: + - qcom,sm6375-dpu + - qcom,sm6125-dpu then: properties: diff --git a/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml index 42ef06eddd..3b9c103e50 100644 --- a/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml index 26dc073bd1..b0fbe86219 100644 --- a/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml index 078e1d1a7d..43500dad66 100644 --- a/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml b/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml index f2c8e16cf0..d19e3bec46 100644 --- a/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml b/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml index c239544bc3..db680fb12b 100644 --- a/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml index 0f7765d832..b917064bdf 100644 --- a/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml index 6ecb00920d..d6d7ac1b2e 100644 --- a/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml index bf62c2f532..510eb6c193 100644 --- a/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml index b9f83088f3..17221b62a6 100644 --- a/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml new file mode 100644 index 0000000000..57f0e36477 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6125 Display MDSS + +maintainers: + - Marijn Suijten <marijn.suijten@somainline.org> + +description: + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6125-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6125-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml index ed0ad194d4..db255b1f4c 100644 --- a/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# @@ -131,13 +131,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml index 76369a4f7c..30d36fffae 100644 --- a/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# @@ -132,13 +132,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml index 2b3f3fe9bd..13146b3f05 100644 --- a/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml# diff --git a/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml index 5182e958e0..54cdaa827c 100644 --- a/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# diff --git a/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml index 687c8c170c..ffa5047e90 100644 --- a/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# @@ -54,7 +54,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; @@ -72,7 +72,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml index 368d3db0ce..e887f031b8 100644 --- a/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# @@ -76,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; @@ -121,7 +121,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -196,7 +196,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +286,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml index 120500395c..96ef2d9c35 100644 --- a/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml# @@ -51,7 +51,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8350-dpu"; @@ -76,7 +76,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml index 79a226e4cc..60d4aae113 100644 --- a/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# @@ -52,6 +52,12 @@ patternProperties: compatible: const: qcom,sm8350-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -75,7 +81,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8350-mdss"; @@ -128,7 +134,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +203,7 @@ examples: <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&mdss_dsi0_phy>; diff --git a/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml index 0d17ece1c4..2a5d3daed0 100644 --- a/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml# @@ -58,7 +58,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8450-dpu"; @@ -83,7 +83,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml index f26eb5643a..bb22940b93 100644 --- a/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml# @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8450-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8450-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -68,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8450-mdss"; @@ -122,7 +130,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -202,7 +210,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -297,7 +305,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml index ff58a747bb..16a541fca6 100644 --- a/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml +++ b/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml# @@ -57,7 +57,7 @@ examples: #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8550-dpu"; @@ -82,7 +82,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml index 887be33ba1..48aea8005c 100644 --- a/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml +++ b/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml# @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8550-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8550-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -68,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; @@ -122,7 +130,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +205,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +294,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/dts/Bindings/display/panel/advantech,idk-2121wr.yaml b/dts/Bindings/display/panel/advantech,idk-2121wr.yaml index 67682fe77f..2e8dbdb5a3 100644 --- a/dts/Bindings/display/panel/advantech,idk-2121wr.yaml +++ b/dts/Bindings/display/panel/advantech,idk-2121wr.yaml @@ -19,6 +19,9 @@ description: | second port, therefore the ports must be marked accordingly (with either dual-lvds-odd-pixels or dual-lvds-even-pixels). +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: diff --git a/dts/Bindings/display/panel/himax,hx8394.yaml b/dts/Bindings/display/panel/himax,hx8394.yaml index 1b2a1baa26..ffb35288ff 100644 --- a/dts/Bindings/display/panel/himax,hx8394.yaml +++ b/dts/Bindings/display/panel/himax,hx8394.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# diff --git a/dts/Bindings/display/panel/ilitek,ili9881c.yaml b/dts/Bindings/display/panel/ilitek,ili9881c.yaml index c5d1df6808..e7ab6224b5 100644 --- a/dts/Bindings/display/panel/ilitek,ili9881c.yaml +++ b/dts/Bindings/display/panel/ilitek,ili9881c.yaml @@ -18,6 +18,7 @@ properties: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - tdo,tl050hdv35 - wanchanglong,w552946aba - const: ilitek,ili9881c diff --git a/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml b/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml index a4b8569ab8..74ff772973 100644 --- a/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# diff --git a/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml index 9f97598efd..72463795e4 100644 --- a/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -20,7 +20,7 @@ description: | The panel itself contains: - AT24C16C EEPROM holding panel identification and timing requirements - AR1021 resistive touch screen controller (optional) - - FT5x6 capacitive touch screnn controller (optional) + - FT5x6 capacitive touch screen controller (optional) - GT911/GT928 capacitive touch screen controller (optional) The above chips share same I2C bus. The EEPROM is factory preprogrammed with diff --git a/dts/Bindings/display/panel/orisetech,otm8009a.yaml b/dts/Bindings/display/panel/orisetech,otm8009a.yaml index ad7d357519..1e4f140f48 100644 --- a/dts/Bindings/display/panel/orisetech,otm8009a.yaml +++ b/dts/Bindings/display/panel/orisetech,otm8009a.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# diff --git a/dts/Bindings/display/panel/panel-common.yaml b/dts/Bindings/display/panel/panel-common.yaml index 5b38dc89cb..0a57a31f4f 100644 --- a/dts/Bindings/display/panel/panel-common.yaml +++ b/dts/Bindings/display/panel/panel-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several classes of - display panels. It doesn't constitue a device tree binding specification by + display panels. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from panel device tree bindings the properties defined in this diff --git a/dts/Bindings/display/panel/panel-dsi-cm.yaml b/dts/Bindings/display/panel/panel-dsi-cm.yaml index 4a36aa64c7..f8dc9929e8 100644 --- a/dts/Bindings/display/panel/panel-dsi-cm.yaml +++ b/dts/Bindings/display/panel/panel-dsi-cm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# diff --git a/dts/Bindings/display/panel/panel-lvds.yaml b/dts/Bindings/display/panel/panel-lvds.yaml index 929fe046d1..9f1016551e 100644 --- a/dts/Bindings/display/panel/panel-lvds.yaml +++ b/dts/Bindings/display/panel/panel-lvds.yaml @@ -40,6 +40,12 @@ properties: items: - enum: - auo,b101ew05 + # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel + - chunghwa,claa070wp03xg + # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel + - hannstar,hsd101pww2 + # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel + - hydis,hv070wx2-1e0 - tbs,a711-panel - const: panel-lvds diff --git a/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml index 2f0238b770..e808215cb3 100644 --- a/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml# @@ -66,6 +66,7 @@ properties: compatible: items: - enum: + - saef,sftc154b - sainsmart18 - shineworld,lh133k - const: panel-mipi-dbi-spi diff --git a/dts/Bindings/display/panel/panel-simple-dsi.yaml b/dts/Bindings/display/panel/panel-simple-dsi.yaml index 90c04cff82..73674baea7 100644 --- a/dts/Bindings/display/panel/panel-simple-dsi.yaml +++ b/dts/Bindings/display/panel/panel-simple-dsi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 1d4936fc51..25b4589d4a 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -103,8 +103,6 @@ properties: - cdtech,s070wv95-ct16 # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel - chefree,ch101olhlwh-002 - # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - - chunghwa,claa070wp03xg # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wa01a # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel @@ -168,8 +166,6 @@ properties: - hannstar,hsd070pww1 # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel - hannstar,hsd100pxn1 - # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - - hannstar,hsd101pww2 # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - hit,tx23d38vm0caa # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel @@ -196,6 +192,8 @@ properties: - innolux,n116bge # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - innolux,n125hce-gn1 + # InnoLux 15.6" FHD (1920x1080) TFT LCD panel + - innolux,g156hce-l01 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel diff --git a/dts/Bindings/display/panel/raydium,rm68200.yaml b/dts/Bindings/display/panel/raydium,rm68200.yaml index e8ce231563..46fe1014eb 100644 --- a/dts/Bindings/display/panel/raydium,rm68200.yaml +++ b/dts/Bindings/display/panel/raydium,rm68200.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# diff --git a/dts/Bindings/display/panel/rocktech,jh057n00900.yaml b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml index 150e81090a..5ea74426b1 100644 --- a/dts/Bindings/display/panel/rocktech,jh057n00900.yaml +++ b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# diff --git a/dts/Bindings/display/panel/sitronix,st7789v.yaml b/dts/Bindings/display/panel/sitronix,st7789v.yaml index fa6556363c..ef162b51d0 100644 --- a/dts/Bindings/display/panel/sitronix,st7789v.yaml +++ b/dts/Bindings/display/panel/sitronix,st7789v.yaml @@ -15,17 +15,26 @@ allOf: properties: compatible: - const: sitronix,st7789v + enum: + - edt,et028013dma + - inanbo,t28cp45tn89-v17 + - jasonic,jt240mhqs-hwt-ek-e3 + - sitronix,st7789v reg: true reset-gpios: true power-supply: true backlight: true port: true + rotation: true spi-cpha: true spi-cpol: true + spi-rx-bus-width: + minimum: 0 + maximum: 1 + dc-gpios: maxItems: 1 description: DCX pin, Display data/command selection pin in parallel interface @@ -33,7 +42,6 @@ properties: required: - compatible - reg - - reset-gpios - power-supply unevaluatedProperties: false @@ -52,6 +60,7 @@ examples: reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; backlight = <&pwm_bl>; power-supply = <&power>; + rotation = <180>; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/dts/Bindings/display/panel/startek,kd070fhfid015.yaml b/dts/Bindings/display/panel/startek,kd070fhfid015.yaml new file mode 100644 index 0000000000..d817f998cd --- /dev/null +++ b/dts/Bindings/display/panel/startek,kd070fhfid015.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel + +maintainers: + - Alexandre Mergnat <amergnat@baylibre.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: startek,kd070fhfid015 + + enable-gpios: true + + iovcc-supply: + description: Reference to the regulator powering the panel IO pins. + + reg: + maxItems: 1 + description: DSI virtual channel + + reset-gpios: true + + port: true + + power-supply: true + +additionalProperties: false + +required: + - compatible + - enable-gpios + - iovcc-supply + - reg + - reset-gpios + - port + - power-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "startek,kd070fhfid015"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/visionox,r66451.yaml b/dts/Bindings/display/panel/visionox,r66451.yaml new file mode 100644 index 0000000000..6ba3236839 --- /dev/null +++ b/dts/Bindings/display/panel/visionox,r66451.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox R66451 AMOLED DSI Panel + +maintainers: + - Jessica Zhang <quic_jesszhan@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,r66451 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,r66451"; + reg = <0>; + vddio-supply = <&vreg_l12c_1p8>; + vdd-supply = <&vreg_l13c_3p0>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/visionox,rm69299.yaml b/dts/Bindings/display/panel/visionox,rm69299.yaml index 444ac2a477..fa745a6f44 100644 --- a/dts/Bindings/display/panel/visionox,rm69299.yaml +++ b/dts/Bindings/display/panel/visionox,rm69299.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# diff --git a/dts/Bindings/display/panel/visionox,vtdr6130.yaml b/dts/Bindings/display/panel/visionox,vtdr6130.yaml index 84562a5b71..d5a8295106 100644 --- a/dts/Bindings/display/panel/visionox,vtdr6130.yaml +++ b/dts/Bindings/display/panel/visionox,vtdr6130.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# diff --git a/dts/Bindings/display/rockchip/rockchip-vop2.yaml b/dts/Bindings/display/rockchip/rockchip-vop2.yaml index fba45091d9..b60b90472d 100644 --- a/dts/Bindings/display/rockchip/rockchip-vop2.yaml +++ b/dts/Bindings/display/rockchip/rockchip-vop2.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# diff --git a/dts/Bindings/display/solomon,ssd1307fb.yaml b/dts/Bindings/display/solomon,ssd1307fb.yaml index 94bb5ef567..20e2bd15d4 100644 --- a/dts/Bindings/display/solomon,ssd1307fb.yaml +++ b/dts/Bindings/display/solomon,ssd1307fb.yaml @@ -49,15 +49,15 @@ properties: solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 - default: 16 description: - Height in pixel of the screen driven by the controller + Height in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,width: $ref: /schemas/types.yaml#/definitions/uint32 - default: 96 description: - Width in pixel of the screen driven by the controller + Width in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,page-offset: $ref: /schemas/types.yaml#/definitions/uint32 @@ -157,6 +157,10 @@ allOf: const: sinowealth,sh1106 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -171,6 +175,10 @@ allOf: - solomon,ssd1305 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -185,6 +193,10 @@ allOf: - solomon,ssd1306 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -199,6 +211,10 @@ allOf: - solomon,ssd1307 then: properties: + width: + default: 128 + height: + default: 39 solomon,dclk-div: default: 2 solomon,dclk-frq: @@ -215,6 +231,10 @@ allOf: - solomon,ssd1309 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml index 70f0e45c71..6f2e224719 100644 --- a/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml +++ b/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml @@ -97,7 +97,7 @@ properties: # optional when driving an eDP output nvidia,dpaux: - description: phandle to a DispayPort AUX interface + description: phandle to a DisplayPort AUX interface $ref: /schemas/types.yaml#/definitions/phandle allOf: diff --git a/dts/Bindings/display/ti/ti,am65x-dss.yaml b/dts/Bindings/display/ti/ti,am65x-dss.yaml index b6b402f161..ae09cd3cbc 100644 --- a/dts/Bindings/display/ti/ti,am65x-dss.yaml +++ b/dts/Bindings/display/ti/ti,am65x-dss.yaml @@ -12,14 +12,18 @@ maintainers: - Tomi Valkeinen <tomi.valkeinen@ti.com> description: | - The AM65x TI Keystone Display SubSystem with two output ports and - two video planes. The first video port supports OLDI and the second - supports DPI format. The fist plane is full video plane with all - features and the second is a "lite plane" without scaling support. + The AM625 and AM65x TI Keystone Display SubSystem with two output + ports and two video planes. In AM65x DSS, the first video port + supports 1 OLDI TX and in AM625 DSS, the first video port output is + internally routed to 2 OLDI TXes. The second video port supports DPI + format. The first plane is full video plane with all features and the + second is a "lite plane" without scaling support. properties: compatible: - const: ti,am65x-dss + enum: + - ti,am625-dss + - ti,am65x-dss reg: description: @@ -80,7 +84,9 @@ properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: - The DSS OLDI output port node form video port 1 + For AM65x DSS, the OLDI output port node from video port 1. + For AM625 DSS, the internal DPI output port node from video + port 1. port@1: $ref: /schemas/graph.yaml#/properties/port diff --git a/dts/Bindings/dma/atmel-xdma.txt b/dts/Bindings/dma/atmel-xdma.txt index 510b7f25ba..76d649b3a2 100644 --- a/dts/Bindings/dma/atmel-xdma.txt +++ b/dts/Bindings/dma/atmel-xdma.txt @@ -3,7 +3,8 @@ * XDMA Controller Required properties: - compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or - "microchip,sama7g5-dma". + "microchip,sama7g5-dma" or + "microchip,sam9x7-dma", "atmel,sama5d4-dma". - reg: Should contain DMA registers location and length. - interrupts: Should contain DMA interrupt. - #dma-cells: Must be <1>, used to represent the number of integer cells in diff --git a/dts/Bindings/dma/brcm,bcm2835-dma.txt b/dts/Bindings/dma/brcm,bcm2835-dma.txt deleted file mode 100644 index b6a8cc0978..0000000000 --- a/dts/Bindings/dma/brcm,bcm2835-dma.txt +++ /dev/null @@ -1,83 +0,0 @@ -* BCM2835 DMA controller - -The BCM2835 DMA controller has 16 channels in total. -Only the lower 13 channels have an associated IRQ. -Some arbitrary channels are used by the firmware -(1,3,6,7 in the current firmware version). -The channels 0,2 and 3 have special functionality -and should not be used by the driver. - -Required properties: -- compatible: Should be "brcm,bcm2835-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain the DMA interrupts associated - to the DMA channels in ascending order. -- interrupt-names: Should contain the names of the interrupt - in the form "dmaXX". - Use "dma-shared-all" for the common interrupt line - that is shared by all dma channels. -- #dma-cells: Must be <1>, the cell in the dmas property of the - client device represents the DREQ number. -- brcm,dma-channel-mask: Bit mask representing the channels - not used by the firmware in ascending order, - i.e. first channel corresponds to LSB. - -Example: - -dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; -}; - - -DMA clients connected to the BCM2835 DMA controller must use the format -described in the dma.txt file, using a two-cell specifier for each channel. - -Example: - -bcm2835_i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; - reg = < 0x7e203000 0x24>; - clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; -}; diff --git a/dts/Bindings/dma/brcm,bcm2835-dma.yaml b/dts/Bindings/dma/brcm,bcm2835-dma.yaml new file mode 100644 index 0000000000..c9b9a54908 --- /dev/null +++ b/dts/Bindings/dma/brcm,bcm2835-dma.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 DMA controller + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +description: + The BCM2835 DMA controller has 16 channels in total. Only the lower + 13 channels have an associated IRQ. Some arbitrary channels are used by the + VideoCore firmware (1,3,6,7 in the current firmware version). The channels + 0, 2 and 3 have special functionality and should not be used by the driver. + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + const: brcm,bcm2835-dma + + reg: + maxItems: 1 + + interrupts: + description: + Should contain the DMA interrupts associated to the DMA channels in + ascending order. + minItems: 1 + maxItems: 16 + + interrupt-names: + minItems: 1 + maxItems: 16 + + '#dma-cells': + description: The single cell represents the DREQ number. + const: 1 + + brcm,dma-channel-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask of available DMA channels in ascending order that are + not reserved by firmware and are available to the + kernel. i.e. first channel corresponds to LSB. + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + - brcm,dma-channel-mask + +examples: + - | + dma-controller@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + +... diff --git a/dts/Bindings/dma/fsl,edma.yaml b/dts/Bindings/dma/fsl,edma.yaml index 5fd8fc6042..437db0c623 100644 --- a/dts/Bindings/dma/fsl,edma.yaml +++ b/dts/Bindings/dma/fsl,edma.yaml @@ -21,32 +21,41 @@ properties: - enum: - fsl,vf610-edma - fsl,imx7ulp-edma + - fsl,imx8qm-adma + - fsl,imx8qm-edma + - fsl,imx93-edma3 + - fsl,imx93-edma4 - items: - const: fsl,ls1028a-edma - const: fsl,vf610-edma reg: - minItems: 2 + minItems: 1 maxItems: 3 interrupts: - minItems: 2 - maxItems: 17 + minItems: 1 + maxItems: 64 interrupt-names: - minItems: 2 - maxItems: 17 + minItems: 1 + maxItems: 64 "#dma-cells": - const: 2 + enum: + - 2 + - 3 dma-channels: - const: 32 + minItems: 1 + maxItems: 64 clocks: + minItems: 1 maxItems: 2 clock-names: + minItems: 1 maxItems: 2 big-endian: @@ -69,21 +78,52 @@ allOf: properties: compatible: contains: + enum: + - fsl,imx8qm-adma + - fsl,imx8qm-edma + - fsl,imx93-edma3 + - fsl,imx93-edma4 + then: + properties: + "#dma-cells": + const: 3 + # It is not necessary to write the interrupt name for each channel. + # instead, you can simply maintain the sequential IRQ numbers as + # defined for the DMA channels. + interrupt-names: false + clock-names: + items: + - const: dma + clocks: + maxItems: 1 + + - if: + properties: + compatible: + contains: const: fsl,vf610-edma then: properties: + clocks: + minItems: 2 clock-names: items: - const: dmamux0 - const: dmamux1 interrupts: + minItems: 2 maxItems: 2 interrupt-names: items: - const: edma-tx - const: edma-err reg: + minItems: 2 maxItems: 3 + "#dma-cells": + const: 2 + dma-channels: + const: 32 - if: properties: @@ -92,14 +132,22 @@ allOf: const: fsl,imx7ulp-edma then: properties: + clock: + minItems: 2 clock-names: items: - const: dma - const: dmamux0 interrupts: + minItems: 2 maxItems: 17 reg: + minItems: 2 maxItems: 2 + "#dma-cells": + const: 2 + dma-channels: + const: 32 unevaluatedProperties: false @@ -153,3 +201,47 @@ examples: clock-names = "dma", "dmamux0"; clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx93-clock.h> + + dma-controller@44000000 { + compatible = "fsl,imx93-edma3"; + reg = <0x44000000 0x200000>; + #dma-cells = <3>; + dma-channels = <31>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_EDMA1_GATE>; + clock-names = "dma"; + }; diff --git a/dts/Bindings/dma/ingenic,dma.yaml b/dts/Bindings/dma/ingenic,dma.yaml index 37400496e0..d9cca3006e 100644 --- a/dts/Bindings/dma/ingenic,dma.yaml +++ b/dts/Bindings/dma/ingenic,dma.yaml @@ -68,7 +68,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: > Bitmask of channels to reserve for devices that need a specific - channel. These channels will only be assigned when explicitely + channel. These channels will only be assigned when explicitly requested by a client. The primary use for this is channels 0 and 1, which can be configured to have special behaviour for NAND/BCH when using programmable firmware. diff --git a/dts/Bindings/dma/nvidia,tegra20-apbdma.txt b/dts/Bindings/dma/nvidia,tegra20-apbdma.txt index c6908e7c42..447fb44e7a 100644 --- a/dts/Bindings/dma/nvidia,tegra20-apbdma.txt +++ b/dts/Bindings/dma/nvidia,tegra20-apbdma.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "nvidia,<chip>-apbdma" -- reg: Should contain DMA registers location and length. This shuld include +- reg: Should contain DMA registers location and length. This should include all of the per-channel registers. - interrupts: Should contain all of the per-channel DMA interrupts. - clocks: Must contain one entry, for the module clock. diff --git a/dts/Bindings/dma/qcom,bam-dma.yaml b/dts/Bindings/dma/qcom,bam-dma.yaml index f1ddcf6722..3ad0d9b1fb 100644 --- a/dts/Bindings/dma/qcom,bam-dma.yaml +++ b/dts/Bindings/dma/qcom,bam-dma.yaml @@ -15,13 +15,19 @@ allOf: properties: compatible: - enum: - # APQ8064, IPQ8064 and MSM8960 - - qcom,bam-v1.3.0 - # MSM8974, APQ8074 and APQ8084 - - qcom,bam-v1.4.0 - # MSM8916 and SDM845 - - qcom,bam-v1.7.0 + oneOf: + - enum: + # APQ8064, IPQ8064 and MSM8960 + - qcom,bam-v1.3.0 + # MSM8974, APQ8074 and APQ8084 + - qcom,bam-v1.4.0 + # MSM8916, SDM630 + - qcom,bam-v1.7.0 + - items: + - enum: + # SDM845, SM6115, SM8150, SM8250 and QCM2290 + - qcom,bam-v1.7.4 + - const: qcom,bam-v1.7.0 clocks: maxItems: 1 @@ -38,7 +44,7 @@ properties: iommus: minItems: 1 - maxItems: 4 + maxItems: 6 num-channels: $ref: /schemas/types.yaml#/definitions/uint32 @@ -48,7 +54,7 @@ properties: qcom,controlled-remotely: type: boolean description: - Indicates that the bam is controlled by remote proccessor i.e. execution + Indicates that the bam is controlled by remote processor i.e. execution environment. qcom,ee: @@ -81,6 +87,15 @@ required: - qcom,ee - reg +anyOf: + - required: + - qcom,powered-remotely + - required: + - qcom,controlled-remotely + - required: + - clocks + - clock-names + additionalProperties: false examples: diff --git a/dts/Bindings/dma/stericsson,dma40.yaml b/dts/Bindings/dma/stericsson,dma40.yaml index 1e5752b19a..7b94d24d5e 100644 --- a/dts/Bindings/dma/stericsson,dma40.yaml +++ b/dts/Bindings/dma/stericsson,dma40.yaml @@ -148,7 +148,7 @@ properties: memcpy-channels: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of u32 elements indicating which channels on the DMA - engine are elegible for memcpy transfers + engine are eligible for memcpy transfers required: - "#dma-cells" diff --git a/dts/Bindings/dma/xilinx/xilinx_dma.txt b/dts/Bindings/dma/xilinx/xilinx_dma.txt index d1700a5c36..590d1948f2 100644 --- a/dts/Bindings/dma/xilinx/xilinx_dma.txt +++ b/dts/Bindings/dma/xilinx/xilinx_dma.txt @@ -49,6 +49,12 @@ Optional properties for AXI DMA and MCDMA: register as configured in h/w. Takes values {8...26}. If the property is missing or invalid then the default value 23 is used. This is the maximum value that is supported by all IP versions. + +Optional properties for AXI DMA: +- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP. +- xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from + 0-255. Setting this value to zero disables the delay timer interrupt. + 1 timeout interval = 125 * clock period of SG clock. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml index 84af0d5f52..98139489d4 100644 --- a/dts/Bindings/eeprom/at24.yaml +++ b/dts/Bindings/eeprom/at24.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at24.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at24.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: I2C EEPROMs compatible with Atmel's AT24 @@ -102,6 +102,9 @@ properties: # These are special cases that don't conform to the above pattern. # Each requires a standard at24 model as fallback. - items: + - const: belling,bl24c16a + - const: atmel,24c16 + - items: - enum: - rohm,br24g01 - rohm,br24t01 diff --git a/dts/Bindings/eeprom/at25.yaml b/dts/Bindings/eeprom/at25.yaml index 0e31bb36eb..1715b0c9fe 100644 --- a/dts/Bindings/eeprom/at25.yaml +++ b/dts/Bindings/eeprom/at25.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at25.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at25.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: SPI EEPROMs or FRAMs compatible with Atmel's AT25 diff --git a/dts/Bindings/extcon/maxim,max77843.yaml b/dts/Bindings/extcon/maxim,max77843.yaml index 1289605456..55800fb022 100644 --- a/dts/Bindings/extcon/maxim,max77843.yaml +++ b/dts/Bindings/extcon/maxim,max77843.yaml @@ -23,6 +23,7 @@ properties: connector: $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/dts/Bindings/extcon/qcom,pm8941-misc.yaml b/dts/Bindings/extcon/qcom,pm8941-misc.yaml index 2c8cf6aab1..6b80518cbf 100644 --- a/dts/Bindings/extcon/qcom,pm8941-misc.yaml +++ b/dts/Bindings/extcon/qcom,pm8941-misc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Some Qualcomm PMICs have a "misc" module that can be used to detect when diff --git a/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml b/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml index 7a224b2f09..7ef2d9bef7 100644 --- a/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml +++ b/dts/Bindings/extcon/siliconmitus,sm5502-muic.yaml @@ -27,6 +27,10 @@ properties: description: I2C slave address of the device. Usually 0x25 for SM5502 and SM5703, 0x14 for SM5504. + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + interrupts: maxItems: 1 diff --git a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 9a785bbaaf..e6bed7d93e 100644 --- a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx Network Processing Engine diff --git a/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml b/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml index 833c07f168..c43d17f6e9 100644 --- a/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml +++ b/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml @@ -57,8 +57,11 @@ description: | "#address-cells" or "#size-cells" property. The shared memory area for the IPC TX and RX between CPU and BPMP are - predefined and work on top of sysram, which is an SRAM inside the - chip. See ".../sram/sram.yaml" for the bindings. + predefined and work on top of either sysram, which is an SRAM inside the + chip, or in normal SDRAM. + See ".../sram/sram.yaml" for the bindings for the SRAM case. + See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for + the SDRAM case. properties: compatible: @@ -81,6 +84,11 @@ properties: minItems: 2 maxItems: 2 + memory-region: + description: phandle to reserved memory region used for IPC between + CPU-NS and BPMP. + maxItems: 1 + "#clock-cells": const: 1 @@ -115,10 +123,15 @@ properties: additionalProperties: false +oneOf: + - required: + - memory-region + - required: + - shmem + required: - compatible - mboxes - - shmem - "#clock-cells" - "#power-domain-cells" - "#reset-cells" @@ -165,8 +178,7 @@ examples: <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; interconnect-names = "read", "write", "dma-mem", "dma-write"; iommus = <&smmu TEGRA186_SID_BPMP>; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB - TEGRA_HSP_DB_MASTER_BPMP>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>; #clock-cells = <1>; #power-domain-cells = <1>; @@ -184,3 +196,20 @@ examples: #thermal-sensor-cells = <1>; }; }; + + - | + #include <dt-bindings/mailbox/tegra186-hsp.h> + + bpmp { + compatible = "nvidia,tegra186-bpmp"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; + mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; + memory-region = <&dram_cpu_bpmp_mail>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/firmware/qcom,scm.yaml b/dts/Bindings/firmware/qcom,scm.yaml index bdbee58a54..4233ea839b 100644 --- a/dts/Bindings/firmware/qcom,scm.yaml +++ b/dts/Bindings/firmware/qcom,scm.yaml @@ -176,6 +176,7 @@ allOf: contains: enum: - qcom,scm-qdu1000 + - qcom,scm-sc8280xp - qcom,scm-sm8450 - qcom,scm-sm8550 then: diff --git a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index 910bebe6cf..822864488d 100644 --- a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -38,6 +38,9 @@ properties: - smc - hvc + "#power-domain-cells": + const: 1 + versal_fpga: $ref: /schemas/fpga/xlnx,versal-fpga.yaml# description: Compatible of the FPGA device. @@ -66,6 +69,17 @@ additionalProperties: false examples: - | + #include <dt-bindings/power/xlnx-zynqmp-power.h> + firmware { + zynqmp_firmware: zynqmp-firmware { + #power-domain-cells = <1>; + }; + }; + + sata { + power-domains = <&zynqmp_firmware PD_SATA>; + }; + versal-firmware { compatible = "xlnx,versal-firmware"; method = "smc"; diff --git a/dts/Bindings/fpga/fpga-region.txt b/dts/Bindings/fpga/fpga-region.txt index 6694ef29a2..528df8a0e6 100644 --- a/dts/Bindings/fpga/fpga-region.txt +++ b/dts/Bindings/fpga/fpga-region.txt @@ -63,7 +63,7 @@ FPGA Bridge will be disabled. * During Partial Reconfiguration of a specific region, that region's bridge will be used to gate the busses. Traffic to other regions is not affected. - * In some implementations, the FPGA Manager transparantly handles gating the + * In some implementations, the FPGA Manager transparently handles gating the buses, eliminating the need to show the hardware FPGA bridges in the device tree. * An FPGA image may create a set of reprogrammable regions, each having its @@ -466,7 +466,7 @@ It is beyond the scope of this document to fully describe all the FPGA design constraints required to make partial reconfiguration work[1] [2] [3], but a few deserve quick mention. -A persona must have boundary connections that line up with those of the partion +A persona must have boundary connections that line up with those of the partition or region it is designed to go into. During programming, transactions through those connections must be stopped and diff --git a/dts/Bindings/fsi/ibm,i2cr-fsi-master.yaml b/dts/Bindings/fsi/ibm,i2cr-fsi-master.yaml new file mode 100644 index 0000000000..442cecdc57 --- /dev/null +++ b/dts/Bindings/fsi/ibm,i2cr-fsi-master.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM I2C Responder virtual FSI master + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM + (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and + writes or SCOM operations, thereby acting as an FSI master. + +properties: + compatible: + enum: + - ibm,i2cr-fsi-master + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2cr@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + }; + }; diff --git a/dts/Bindings/gpio/adi,ds4520-gpio.yaml b/dts/Bindings/gpio/adi,ds4520-gpio.yaml new file mode 100644 index 0000000000..25b3198c4d --- /dev/null +++ b/dts/Bindings/gpio/adi,ds4520-gpio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/adi,ds4520-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DS4520 I2C GPIO expander + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +properties: + compatible: + enum: + - adi,ds4520-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + ngpios: + minimum: 1 + maximum: 9 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - ngpios + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gpio@50 { + compatible = "adi,ds4520-gpio"; + reg = <0x50>; + ngpios = <9>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/dts/Bindings/gpio/brcm,kona-gpio.txt b/dts/Bindings/gpio/brcm,kona-gpio.txt deleted file mode 100644 index 4a63bc96b6..0000000000 --- a/dts/Bindings/gpio/brcm,kona-gpio.txt +++ /dev/null @@ -1,52 +0,0 @@ -Broadcom Kona Family GPIO -========================= - -This GPIO driver is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -The Broadcom GPIO Controller IP can be configured prior to synthesis to -support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The -GPIO controller only supports edge, not level, triggering of interrupts. - -Required properties -------------------- - -- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio" -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends on the - number of GPIO banks on the SoC. The interrupts must be ordered by bank, - starting with bank 0. There is always a 1:1 mapping between banks and - IRQs. -- #gpio-cells: Should be <2>. The first cell is the pin number, the second - cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) - See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type (bits[1:0]): - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 3 = low-to-high or high-to-low edge triggered - Valid values are 1, 2, 3 - See also .../devicetree/bindings/interrupt-controller/interrupts.txt. -- gpio-controller: Marks the device node as a GPIO controller. -- interrupt-controller: Marks the device node as an interrupt controller. - -Example: - gpio: gpio@35003000 { - compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x800>; - interrupts = - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; diff --git a/dts/Bindings/gpio/brcm,kona-gpio.yaml b/dts/Bindings/gpio/brcm,kona-gpio.yaml new file mode 100644 index 0000000000..296fdd6b8f --- /dev/null +++ b/dts/Bindings/gpio/brcm,kona-gpio.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family GPIO controller + +description: + The Broadcom GPIO Controller IP can be configured prior to synthesis to + support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The + GPIO controller only supports edge, not level, triggering of interrupts. + +maintainers: + - Ray Jui <rjui@broadcom.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-gpio + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + - const: brcm,kona-gpio + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 6 + description: + The interrupt outputs from the controller. There is one GPIO interrupt + per GPIO bank. The number of interrupts listed depends on the number of + GPIO banks on the SoC. The interrupts must be ordered by bank, starting + with bank 0. There is always a 1:1 mapping between banks and IRQs. + + '#gpio-cells': + const: 2 + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - '#gpio-cells' + - '#interrupt-cells' + - gpio-controller + - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm11351-gpio + then: + properties: + interrupts: + minItems: 6 + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + then: + properties: + interrupts: + maxItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; +... diff --git a/dts/Bindings/gpio/fsl-imx-gpio.yaml b/dts/Bindings/gpio/fsl-imx-gpio.yaml index ae18603697..d0ca2af89f 100644 --- a/dts/Bindings/gpio/fsl-imx-gpio.yaml +++ b/dts/Bindings/gpio/fsl-imx-gpio.yaml @@ -32,10 +32,12 @@ properties: - fsl,imx6sx-gpio - fsl,imx6ul-gpio - fsl,imx7d-gpio + - fsl,imx8dxl-gpio - fsl,imx8mm-gpio - fsl,imx8mn-gpio - fsl,imx8mp-gpio - fsl,imx8mq-gpio + - fsl,imx8qm-gpio - fsl,imx8qxp-gpio - fsl,imxrt1050-gpio - fsl,imxrt1170-gpio diff --git a/dts/Bindings/gpio/gpio-pca95xx.yaml b/dts/Bindings/gpio/gpio-pca95xx.yaml index fa116148ee..99febb8ea1 100644 --- a/dts/Bindings/gpio/gpio-pca95xx.yaml +++ b/dts/Bindings/gpio/gpio-pca95xx.yaml @@ -66,6 +66,7 @@ properties: - ti,tca6408 - ti,tca6416 - ti,tca6424 + - ti,tca9538 - ti,tca9539 - ti,tca9554 diff --git a/dts/Bindings/gpio/gpio-xgene-sb.txt b/dts/Bindings/gpio/gpio-xgene-sb.txt index e90fb987e2..7ddf292db1 100644 --- a/dts/Bindings/gpio/gpio-xgene-sb.txt +++ b/dts/Bindings/gpio/gpio-xgene-sb.txt @@ -27,7 +27,7 @@ Required properties: - gpio-controller: Marks the device node as a GPIO controller. - interrupts: The EXT_INT_0 parent interrupt resource must be listed first. - interrupt-cells: Should be two. - - first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N. + - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N. - second cell is used to specify flags. - interrupt-controller: Marks the device node as an interrupt controller. - apm,nr-gpios: Optional, specify number of gpios pin. diff --git a/dts/Bindings/gpio/gpio_oxnas.txt b/dts/Bindings/gpio/gpio_oxnas.txt deleted file mode 100644 index 966514744d..0000000000 --- a/dts/Bindings/gpio/gpio_oxnas.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Oxford Semiconductor OXNAS SoC GPIO Controller - -Please refer to gpio.txt for generic information regarding GPIO bindings. - -Required properties: - - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - - reg: Base address and length for the device. - - interrupts: The port interrupt shared by all pins. - - gpio-controller: Marks the port as GPIO controller. - - #gpio-cells: Two. The first cell is the pin number and - the second cell is used to specify the gpio polarity as defined in - defined in <dt-bindings/gpio/gpio.h>: - 0 = GPIO_ACTIVE_HIGH - 1 = GPIO_ACTIVE_LOW - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells: Two. The first cell is the GPIO number and second cell - is used to specify the trigger type as defined in - <dt-bindings/interrupt-controller/irq.h>: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the - gpio base and count, should be in the format of numeric-gpio-range as - specified in the gpio.txt file. - -Example: - -gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&pinctrl 0 0 32>; -}; - -keys { - ... - - button-esc { - label = "ESC"; - linux,code = <1>; - gpios = <&gpio0 12 0>; - }; -}; diff --git a/dts/Bindings/gpio/snps,dw-apb-gpio.yaml b/dts/Bindings/gpio/snps,dw-apb-gpio.yaml index b391cc1b45..eefe7b3452 100644 --- a/dts/Bindings/gpio/snps,dw-apb-gpio.yaml +++ b/dts/Bindings/gpio/snps,dw-apb-gpio.yaml @@ -9,7 +9,7 @@ title: Synopsys DesignWare APB GPIO controller description: | Synopsys DesignWare GPIO controllers have a configurable number of ports, each of which are intended to be represented as child nodes with the generic - GPIO-controller properties as desribed in this bindings file. + GPIO-controller properties as described in this bindings file. maintainers: - Hoan Tran <hoan@os.amperecomputing.com> @@ -61,6 +61,10 @@ patternProperties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 1 + maxItems: 32 + ngpios: default: 32 minimum: 1 diff --git a/dts/Bindings/gpio/st,stmpe-gpio.yaml b/dts/Bindings/gpio/st,stmpe-gpio.yaml index 22c0cae734..4555f1644a 100644 --- a/dts/Bindings/gpio/st,stmpe-gpio.yaml +++ b/dts/Bindings/gpio/st,stmpe-gpio.yaml @@ -28,6 +28,10 @@ properties: gpio-controller: true + gpio-line-names: + minItems: 1 + maxItems: 24 + interrupt-controller: true st,norequest-mask: diff --git a/dts/Bindings/gpio/ti,omap-gpio.yaml b/dts/Bindings/gpio/ti,omap-gpio.yaml index bd721c8390..7b75d2f92f 100644 --- a/dts/Bindings/gpio/ti,omap-gpio.yaml +++ b/dts/Bindings/gpio/ti,omap-gpio.yaml @@ -58,14 +58,14 @@ properties: deprecated: true description: Name of the hwmod associated with the GPIO. Needed on some legacy OMAP - SoCs which have not been converted to the ti,sysc interconnect hierarachy. + SoCs which have not been converted to the ti,sysc interconnect hierarchy. ti,no-reset-on-init: $ref: /schemas/types.yaml#/definitions/flag deprecated: true description: Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which - have not been converted to the ti,sysc interconnect hierarachy. + have not been converted to the ti,sysc interconnect hierarchy. patternProperties: "^(.+-hog(-[0-9]+)?)$": diff --git a/dts/Bindings/gpio/x-powers,axp209-gpio.yaml b/dts/Bindings/gpio/x-powers,axp209-gpio.yaml index 1638cfe90f..5eeb29bcdd 100644 --- a/dts/Bindings/gpio/x-powers,axp209-gpio.yaml +++ b/dts/Bindings/gpio/x-powers,axp209-gpio.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: X-Powers AXP209 GPIO diff --git a/dts/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/dts/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 18e61aff21..56143f1fe8 100644 --- a/dts/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/dts/Bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ZynqMP Mode Pin GPIO controller diff --git a/dts/Bindings/gpio/xylon,logicvc-gpio.yaml b/dts/Bindings/gpio/xylon,logicvc-gpio.yaml index a36aec2706..59c79a6943 100644 --- a/dts/Bindings/gpio/xylon,logicvc-gpio.yaml +++ b/dts/Bindings/gpio/xylon,logicvc-gpio.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC GPIO controller diff --git a/dts/Bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/dts/Bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml index 38478dad8b..584cce3211 100644 --- a/dts/Bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml +++ b/dts/Bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml# diff --git a/dts/Bindings/hwlock/ti,omap-hwspinlock.yaml b/dts/Bindings/hwlock/ti,omap-hwspinlock.yaml index 0a955c7b97..5ba60d532f 100644 --- a/dts/Bindings/hwlock/ti,omap-hwspinlock.yaml +++ b/dts/Bindings/hwlock/ti,omap-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml# diff --git a/dts/Bindings/hwmon/adi,adm1177.yaml b/dts/Bindings/hwmon/adi,adm1177.yaml index ca2b473206..2e45364d05 100644 --- a/dts/Bindings/hwmon/adi,adm1177.yaml +++ b/dts/Bindings/hwmon/adi,adm1177.yaml @@ -27,7 +27,7 @@ properties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. If not provided, + The value of current sense resistor in microohms. If not provided, the current reading and overcurrent alert is disabled. adi,shutdown-threshold-microamp: diff --git a/dts/Bindings/hwmon/adi,axi-fan-control.yaml b/dts/Bindings/hwmon/adi,axi-fan-control.yaml index 0cf3ed6212..6751f9b643 100644 --- a/dts/Bindings/hwmon/adi,axi-fan-control.yaml +++ b/dts/Bindings/hwmon/adi,axi-fan-control.yaml @@ -11,7 +11,7 @@ maintainers: - Nuno Sá <nuno.sa@analog.com> description: |+ - Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + Bindings for the Analog Devices AXI FAN Control driver. Specifications of the core can be found in: https://wiki.analog.com/resources/fpga/docs/axi_fan_control diff --git a/dts/Bindings/hwmon/adi,ltc2992.yaml b/dts/Bindings/hwmon/adi,ltc2992.yaml index b39c632956..0ad12d2456 100644 --- a/dts/Bindings/hwmon/adi,ltc2992.yaml +++ b/dts/Bindings/hwmon/adi,ltc2992.yaml @@ -46,7 +46,7 @@ patternProperties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. + The value of current sense resistor in microohms. required: - compatible diff --git a/dts/Bindings/hwmon/aspeed-pwm-tacho.txt b/dts/Bindings/hwmon/aspeed-pwm-tacho.txt index 3ac02988a1..8645cd3b86 100644 --- a/dts/Bindings/hwmon/aspeed-pwm-tacho.txt +++ b/dts/Bindings/hwmon/aspeed-pwm-tacho.txt @@ -45,7 +45,7 @@ Required properties for each child node: - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. - Atleast one Fan tach input channel is required. + At least one Fan tach input channel is required. Examples: diff --git a/dts/Bindings/hwmon/iio-hwmon.yaml b/dts/Bindings/hwmon/iio-hwmon.yaml index c54b5986b3..e5b24782f4 100644 --- a/dts/Bindings/hwmon/iio-hwmon.yaml +++ b/dts/Bindings/hwmon/iio-hwmon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ADC-attached Hardware Sensor diff --git a/dts/Bindings/hwmon/jedec,jc42.yaml b/dts/Bindings/hwmon/jedec,jc42.yaml index 0e49b39011..bf3332153a 100644 --- a/dts/Bindings/hwmon/jedec,jc42.yaml +++ b/dts/Bindings/hwmon/jedec,jc42.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# diff --git a/dts/Bindings/hwmon/lltc,ltc4151.yaml b/dts/Bindings/hwmon/lltc,ltc4151.yaml index b1a4c23537..e62aff6704 100644 --- a/dts/Bindings/hwmon/lltc,ltc4151.yaml +++ b/dts/Bindings/hwmon/lltc,ltc4151.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# diff --git a/dts/Bindings/hwmon/lm75.yaml b/dts/Bindings/hwmon/lm75.yaml index 8226e3b5d0..0b69897f0c 100644 --- a/dts/Bindings/hwmon/lm75.yaml +++ b/dts/Bindings/hwmon/lm75.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lm75.yaml# diff --git a/dts/Bindings/hwmon/lm87.txt b/dts/Bindings/hwmon/lm87.txt index e1b79903f2..758ff398b6 100644 --- a/dts/Bindings/hwmon/lm87.txt +++ b/dts/Bindings/hwmon/lm87.txt @@ -18,7 +18,7 @@ optional properties: in7. Otherwise the pin is set as FAN2 input. - vcc-supply: a Phandle for the regulator supplying power, can be - cofigured to measure 5.0V power supply. Default is 3.3V. + configured to measure 5.0V power supply. Default is 3.3V. Example: diff --git a/dts/Bindings/hwmon/ltq-cputemp.txt b/dts/Bindings/hwmon/ltq-cputemp.txt index 33fd00a987..473b34c876 100644 --- a/dts/Bindings/hwmon/ltq-cputemp.txt +++ b/dts/Bindings/hwmon/ltq-cputemp.txt @@ -1,4 +1,4 @@ -Lantiq cpu temperatur sensor +Lantiq cpu temperature sensor Requires node properties: - compatible value : diff --git a/dts/Bindings/hwmon/microchip,mcp3021.yaml b/dts/Bindings/hwmon/microchip,mcp3021.yaml index 028d6e5701..f5e104c1b0 100644 --- a/dts/Bindings/hwmon/microchip,mcp3021.yaml +++ b/dts/Bindings/hwmon/microchip,mcp3021.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# diff --git a/dts/Bindings/hwmon/moortec,mr75203.yaml b/dts/Bindings/hwmon/moortec,mr75203.yaml index bd67cfee6d..56db2292f0 100644 --- a/dts/Bindings/hwmon/moortec,mr75203.yaml +++ b/dts/Bindings/hwmon/moortec,mr75203.yaml @@ -42,7 +42,7 @@ properties: reg: items: - description: PVT common registers - - description: PVT temprature sensor registers + - description: PVT temperature sensor registers - description: PVT process detector registers - description: PVT voltage monitor registers diff --git a/dts/Bindings/hwmon/national,lm90.yaml b/dts/Bindings/hwmon/national,lm90.yaml index 7b9d48d6d6..6e59c8fdef 100644 --- a/dts/Bindings/hwmon/national,lm90.yaml +++ b/dts/Bindings/hwmon/national,lm90.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# diff --git a/dts/Bindings/hwmon/npcm750-pwm-fan.txt b/dts/Bindings/hwmon/npcm750-pwm-fan.txt index 28f43e929f..8523777f56 100644 --- a/dts/Bindings/hwmon/npcm750-pwm-fan.txt +++ b/dts/Bindings/hwmon/npcm750-pwm-fan.txt @@ -23,7 +23,7 @@ Required properties for pwm-fan node fan subnode format: =================== Under fan subnode can be upto 8 child nodes, each child node representing a fan. -Each fan subnode must have one PWM channel and atleast one Fan tach channel. +Each fan subnode must have one PWM channel and at least one Fan tach channel. For PWM channel can be configured cooling-levels to create cooling device. Cooling device could be bound to a thermal zone for the thermal control. diff --git a/dts/Bindings/hwmon/nxp,mc34vr500.yaml b/dts/Bindings/hwmon/nxp,mc34vr500.yaml index 306f673158..48d654e521 100644 --- a/dts/Bindings/hwmon/nxp,mc34vr500.yaml +++ b/dts/Bindings/hwmon/nxp,mc34vr500.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml# diff --git a/dts/Bindings/hwmon/sensirion,sht15.yaml b/dts/Bindings/hwmon/sensirion,sht15.yaml index 80df7182ea..14ac783c9a 100644 --- a/dts/Bindings/hwmon/sensirion,sht15.yaml +++ b/dts/Bindings/hwmon/sensirion,sht15.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# diff --git a/dts/Bindings/hwmon/sensirion,shtc1.yaml b/dts/Bindings/hwmon/sensirion,shtc1.yaml index 159238efa9..3d14d5fc96 100644 --- a/dts/Bindings/hwmon/sensirion,shtc1.yaml +++ b/dts/Bindings/hwmon/sensirion,shtc1.yaml @@ -13,7 +13,7 @@ description: | The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors designed especially for battery-driven high-volume consumer electronics applications. - For further information refere to Documentation/hwmon/shtc1.rst + For further information refer to Documentation/hwmon/shtc1.rst This binding document describes the binding for the hardware monitor portion of the driver. diff --git a/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml b/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml index f5b3452892..733cba7801 100644 --- a/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml +++ b/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml @@ -27,8 +27,8 @@ properties: clock-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus '#thermal-sensor-cells': const: 0 @@ -39,8 +39,8 @@ properties: reset-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus required: - compatible diff --git a/dts/Bindings/hwmon/ti,tmp102.yaml b/dts/Bindings/hwmon/ti,tmp102.yaml index c5a889e3e2..7e5b62a021 100644 --- a/dts/Bindings/hwmon/ti,tmp102.yaml +++ b/dts/Bindings/hwmon/ti,tmp102.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# diff --git a/dts/Bindings/hwmon/ti,tmp108.yaml b/dts/Bindings/hwmon/ti,tmp108.yaml index dcbc6fbc3b..8b5307c875 100644 --- a/dts/Bindings/hwmon/ti,tmp108.yaml +++ b/dts/Bindings/hwmon/ti,tmp108.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# diff --git a/dts/Bindings/hwmon/ti,tmp513.yaml b/dts/Bindings/hwmon/ti,tmp513.yaml index fde5225ce0..cdd1489e0c 100644 --- a/dts/Bindings/hwmon/ti,tmp513.yaml +++ b/dts/Bindings/hwmon/ti,tmp513.yaml @@ -33,7 +33,7 @@ properties: shunt-resistor-micro-ohms: description: | - If 0, the calibration process will be skiped and the current and power + If 0, the calibration process will be skipped and the current and power measurement engine will not work. Temperature and voltage measurement will continue to work. The shunt value also need to respect: rshunt <= pga-gain * 40 * 1000 * 1000. diff --git a/dts/Bindings/hwmon/ti,tps23861.yaml b/dts/Bindings/hwmon/ti,tps23861.yaml index bce68a3269..ebc8d466c1 100644 --- a/dts/Bindings/hwmon/ti,tps23861.yaml +++ b/dts/Bindings/hwmon/ti,tps23861.yaml @@ -26,7 +26,7 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - description: The value of curent sense resistor in microohms. + description: The value of current sense resistor in microohms. default: 255000 minimum: 250000 maximum: 255000 diff --git a/dts/Bindings/i2c/cdns,i2c-r1p10.yaml b/dts/Bindings/i2c/cdns,i2c-r1p10.yaml index ff57c5416e..9f1d35ce1f 100644 --- a/dts/Bindings/i2c/cdns,i2c-r1p10.yaml +++ b/dts/Bindings/i2c/cdns,i2c-r1p10.yaml @@ -48,6 +48,9 @@ properties: default: 16 enum: [2, 4, 8, 16, 32, 64, 128, 256] + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/i2c/i2c-arb-gpio-challenge.txt b/dts/Bindings/i2c/i2c-arb-gpio-challenge.txt deleted file mode 100644 index 548a73cde7..0000000000 --- a/dts/Bindings/i2c/i2c-arb-gpio-challenge.txt +++ /dev/null @@ -1,82 +0,0 @@ -GPIO-based I2C Arbitration Using a Challenge & Response Mechanism -================================================================= -This uses GPIO lines and a challenge & response mechanism to arbitrate who is -the master of an I2C bus in a multimaster situation. - -In many cases using GPIOs to arbitrate is not needed and a design can use -the standard I2C multi-master rules. Using GPIOs is generally useful in -the case where there is a device on the bus that has errata and/or bugs -that makes standard multimaster mode not feasible. - -Note that this scheme works well enough but has some downsides: -* It is nonstandard (not using standard I2C multimaster) -* Having two masters on a bus in general makes it relatively hard to debug - problems (hard to tell if i2c issues were caused by one master, another, or - some device on the bus). - - -Algorithm: - -All masters on the bus have a 'bus claim' line which is an output that the -others can see. These are all active low with pull-ups enabled. We'll -describe these lines as: - -- OUR_CLAIM: output from us signaling to other hosts that we want the bus -- THEIR_CLAIMS: output from others signaling that they want the bus - -The basic algorithm is to assert your line when you want the bus, then make -sure that the other side doesn't want it also. A detailed explanation is best -done with an example. - -Let's say we want to claim the bus. We: -1. Assert OUR_CLAIM. -2. Waits a little bit for the other sides to notice (slew time, say 10 - microseconds). -3. Check THEIR_CLAIMS. If none are asserted then the we have the bus and we are - done. -4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released. -5. If not, back off, release the claim and wait for a few more milliseconds. -6. Go back to 1 (until retry time has expired). - - -Required properties: -- compatible: i2c-arb-gpio-challenge -- our-claim-gpio: The GPIO that we use to claim the bus. -- their-claim-gpios: The GPIOs that the other sides use to claim the bus. - Note that some implementations may only support a single other master. -- I2C arbitration bus node. See i2c-arb.txt in this directory. - -Optional properties: -- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us. -- wait-retry-us: we'll attempt another claim after this many microseconds. - Default is 3000 us. -- wait-free-us: we'll give up after this many microseconds. Default is 50000 us. - - -Example: - i2c@12ca0000 { - compatible = "acme,some-i2c-device"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c-arbitrator { - compatible = "i2c-arb-gpio-challenge"; - - i2c-parent = <&{/i2c@12CA0000}>; - - our-claim-gpio = <&gpf0 3 1>; - their-claim-gpios = <&gpe0 4 1>; - slew-delay-us = <10>; - wait-retry-us = <3000>; - wait-free-us = <50000>; - - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - - i2c@52 { - // Normal I2C device - }; - }; - }; diff --git a/dts/Bindings/i2c/i2c-arb-gpio-challenge.yaml b/dts/Bindings/i2c/i2c-arb-gpio-challenge.yaml new file mode 100644 index 0000000000..b618b5a343 --- /dev/null +++ b/dts/Bindings/i2c/i2c-arb-gpio-challenge.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-arb-gpio-challenge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based I2C Arbitration Using a Challenge & Response Mechanism + +maintainers: + - Doug Anderson <dianders@chromium.org> + - Peter Rosin <peda@axentia.se> + +description: | + This uses GPIO lines and a challenge & response mechanism to arbitrate who is + the master of an I2C bus in a multimaster situation. + + In many cases using GPIOs to arbitrate is not needed and a design can use the + standard I2C multi-master rules. Using GPIOs is generally useful in the case + where there is a device on the bus that has errata and/or bugs that makes + standard multimaster mode not feasible. + + Note that this scheme works well enough but has some downsides: + * It is nonstandard (not using standard I2C multimaster) + * Having two masters on a bus in general makes it relatively hard to debug + problems (hard to tell if i2c issues were caused by one master, another, + or some device on the bus). + + Algorithm: + All masters on the bus have a 'bus claim' line which is an output that the + others can see. These are all active low with pull-ups enabled. We'll + describe these lines as: + * OUR_CLAIM: output from us signaling to other hosts that we want the bus + * THEIR_CLAIMS: output from others signaling that they want the bus + + The basic algorithm is to assert your line when you want the bus, then make + sure that the other side doesn't want it also. A detailed explanation is + best done with an example. + + Let's say we want to claim the bus. We: + 1. Assert OUR_CLAIM. + 2. Waits a little bit for the other sides to notice (slew time, say 10 + microseconds). + 3. Check THEIR_CLAIMS. If none are asserted then the we have the bus and we + are done. + 4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released. + 5. If not, back off, release the claim and wait for a few more milliseconds. + 6. Go back to 1 (until retry time has expired). + +properties: + compatible: + const: i2c-arb-gpio-challenge + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The I2C bus that this multiplexer's master-side port is connected to. + + our-claim-gpios: + maxItems: 1 + description: + The GPIO that we use to claim the bus. + + slew-delay-us: + default: 10 + description: + Time to wait for a GPIO to go high. + + their-claim-gpios: + minItems: 1 + maxItems: 8 + description: + The GPIOs that the other sides use to claim the bus. Note that some + implementations may only support a single other master. + + wait-free-us: + default: 50000 + description: + We'll give up after this many microseconds. + + wait-retry-us: + default: 3000 + description: + We'll attempt another claim after this many microseconds. + + i2c-arb: + type: object + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: + I2C arbitration bus node. + +required: + - compatible + - i2c-arb + - our-claim-gpios + - their-claim-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + i2c-parent = <&i2c_4>; + + our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + embedded-controller@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + }; + }; diff --git a/dts/Bindings/i2c/i2c-arb.txt b/dts/Bindings/i2c/i2c-arb.txt deleted file mode 100644 index 59abf9277b..0000000000 --- a/dts/Bindings/i2c/i2c-arb.txt +++ /dev/null @@ -1,35 +0,0 @@ -Common i2c arbitration bus properties. - -- i2c-arb child node - -Required properties for the i2c-arb child node: -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties for i2c-arb child node: -- Child nodes conforming to i2c bus binding - - -Example : - - /* - An NXP pca9541 I2C bus master selector at address 0x74 - with a NXP pca8574 GPIO expander attached. - */ - - arb@74 { - compatible = "nxp,pca9541"; - reg = <0x74>; - - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - - gpio@38 { - compatible = "nxp,pca8574"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - }; - }; - }; diff --git a/dts/Bindings/i2c/i2c-atr.yaml b/dts/Bindings/i2c/i2c-atr.yaml new file mode 100644 index 0000000000..1939ab339b --- /dev/null +++ b/dts/Bindings/i2c/i2c-atr.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-atr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c address translator properties + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + An I2C Address Translator (ATR) is a device with an I2C slave parent + ("upstream") port and N I2C master child ("downstream") ports, and + forwards transactions from upstream to the appropriate downstream port + with a modified slave address. The address used on the parent bus is + called the "alias" and is (potentially) different from the physical + slave address of the child bus. Address translation is done by the + hardware. + +properties: + i2c-alias-pool: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + I2C alias pool is a pool of I2C addresses on the main I2C bus that can be + used to access the remote peripherals on the serializer's I2C bus. The + addresses must be available, not used by any other peripheral. Each + remote peripheral is assigned an alias from the pool, and transactions to + that address will be forwarded to the remote peripheral, with the address + translated to the remote peripheral's real address. This property is not + needed if there are no I2C addressable remote peripherals. + +additionalProperties: true +... diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.yaml b/dts/Bindings/i2c/i2c-mux-pca954x.yaml index 9f1726d035..2d7bb998b0 100644 --- a/dts/Bindings/i2c/i2c-mux-pca954x.yaml +++ b/dts/Bindings/i2c/i2c-mux-pca954x.yaml @@ -4,21 +4,29 @@ $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP PCA954x I2C bus switch +title: NXP PCA954x I2C and compatible bus switches maintainers: - Laurent Pinchart <laurent.pinchart@ideasonboard.com> description: - The binding supports NXP PCA954x and PCA984x I2C mux/switch devices. - -allOf: - - $ref: /schemas/i2c/i2c-mux.yaml# + The NXP PCA954x and compatible devices are I2C bus + multiplexer/switches that share the same functionality + and register layout. + The devices usually have 4 or 8 child buses, which are + attached to the parent bus by using the SMBus "Send Byte" + command. properties: compatible: oneOf: - enum: + - maxim,max7356 + - maxim,max7357 + - maxim,max7358 + - maxim,max7367 + - maxim,max7368 + - maxim,max7369 - nxp,pca9540 - nxp,pca9542 - nxp,pca9543 @@ -59,10 +67,34 @@ properties: description: if present, overrides i2c-mux-idle-disconnect $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + vdd-supply: + description: A voltage regulator supplying power to the chip. On PCA9846 + the regulator supplies power to VDD2 (core logic) and optionally to VDD1. + required: - compatible - reg +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7367 + - maxim,max7369 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + then: + properties: + interrupts: false + "#interrupt-cells": false + interrupt-controller: false + unevaluatedProperties: false examples: @@ -74,11 +106,13 @@ examples: #size-cells = <0>; i2c-mux@74 { - compatible = "nxp,pca9548"; + compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; reg = <0x74>; + vdd-supply = <&p3v3>; + interrupt-parent = <&ipic>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/dts/Bindings/i2c/i2c-sprd.txt b/dts/Bindings/i2c/i2c-sprd.txt index 60b7cda15d..7b6b3b8d0d 100644 --- a/dts/Bindings/i2c/i2c-sprd.txt +++ b/dts/Bindings/i2c/i2c-sprd.txt @@ -10,7 +10,7 @@ Required properties: "source" for I2C source (parent) clock, "enable" for I2C module enable clock. - clocks: Should contain a clock specifier for each entry in clock-names. -- clock-frequency: Constains desired I2C bus clock frequency in Hz. +- clock-frequency: Contains desired I2C bus clock frequency in Hz. - #address-cells: Should be 1 to describe address cells for I2C device address. - #size-cells: Should be 0 means no size cell for I2C device address. diff --git a/dts/Bindings/i2c/nxp,pca9541.txt b/dts/Bindings/i2c/nxp,pca9541.txt deleted file mode 100644 index 42bfc09c89..0000000000 --- a/dts/Bindings/i2c/nxp,pca9541.txt +++ /dev/null @@ -1,29 +0,0 @@ -* NXP PCA9541 I2C bus master selector - -Required Properties: - - - compatible: Must be "nxp,pca9541" - - - reg: The I2C address of the device. - - The following required properties are defined externally: - - - I2C arbitration bus node. See i2c-arb.txt in this directory. - - -Example: - - i2c-arbitrator@74 { - compatible = "nxp,pca9541"; - reg = <0x74>; - - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - - eeprom@54 { - compatible = "atmel,24c08"; - reg = <0x54>; - }; - }; - }; diff --git a/dts/Bindings/i2c/nxp,pca9541.yaml b/dts/Bindings/i2c/nxp,pca9541.yaml new file mode 100644 index 0000000000..b65c25c1a4 --- /dev/null +++ b/dts/Bindings/i2c/nxp,pca9541.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nxp,pca9541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA9541 I2C bus master selector + +maintainers: + - Peter Rosin <peda@axentia.se> + +properties: + compatible: + const: nxp,pca9541 + + reg: + maxItems: 1 + + i2c-arb: + type: object + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: + I2C arbitration bus node. + +required: + - compatible + - reg + - i2c-arb + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-arbitrator@74 { + compatible = "nxp,pca9541"; + reg = <0x74>; + + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + }; + }; diff --git a/dts/Bindings/i2c/qcom,i2c-cci.yaml b/dts/Bindings/i2c/qcom,i2c-cci.yaml index ec79b72704..042d4dc636 100644 --- a/dts/Bindings/i2c/qcom,i2c-cci.yaml +++ b/dts/Bindings/i2c/qcom,i2c-cci.yaml @@ -269,6 +269,7 @@ examples: port { ov7251_ep: endpoint { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <240000000 319200000>; remote-endpoint = <&csiphy3_ep>; }; }; diff --git a/dts/Bindings/i3c/i3c.yaml b/dts/Bindings/i3c/i3c.yaml index fdb4212149..ab69f4115d 100644 --- a/dts/Bindings/i3c/i3c.yaml +++ b/dts/Bindings/i3c/i3c.yaml @@ -135,9 +135,10 @@ patternProperties: minimum: 0x1 maximum: 0xff description: | - Dynamic address to be assigned to this device. This property is only - valid if the I3C device has a static address (first cell of the reg - property != 0). + Dynamic address to be assigned to this device. In case static address is + present (first cell of the reg property != 0), this address is assigned + through SETDASA. If static address is not present, this address is assigned + through SETNEWDA after assigning a temporary address via ENTDAA. required: - reg @@ -163,12 +164,18 @@ examples: pagesize = <0x8>; }; - /* I3C device with a static I2C address. */ + /* I3C device with a static I2C address and assigned address. */ thermal_sensor: sensor@68,39200144004 { reg = <0x68 0x392 0x144004>; assigned-address = <0xa>; }; + /* I3C device with only assigned address. */ + pressure_sensor: sensor@0,39200124004 { + reg = <0x0 0x392 0x124000>; + assigned-address = <0xc>; + }; + /* * I3C device without a static I2C address but requiring * resources described in the DT. diff --git a/dts/Bindings/i3c/mipi-i3c-hci.yaml b/dts/Bindings/i3c/mipi-i3c-hci.yaml index c002afdbfc..5dda8cb44c 100644 --- a/dts/Bindings/i3c/mipi-i3c-hci.yaml +++ b/dts/Bindings/i3c/mipi-i3c-hci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MIPI I3C HCI diff --git a/dts/Bindings/iio/accel/fsl,mma7455.yaml b/dts/Bindings/iio/accel/fsl,mma7455.yaml index c8659c5eba..cb31e75ba6 100644 --- a/dts/Bindings/iio/accel/fsl,mma7455.yaml +++ b/dts/Bindings/iio/accel/fsl,mma7455.yaml @@ -36,8 +36,8 @@ properties: maxItems: 2 items: enum: - - "INT1" - - "INT2" + - INT1 + - INT2 required: - compatible diff --git a/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml new file mode 100644 index 0000000000..7ef46c90eb --- /dev/null +++ b/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1 General Purpose ADC + +maintainers: + - Maksim Kiselev <bigunclemax@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun20i-d1-gpadc + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "^channel@[0-9a-f]+$": + $ref: adc.yaml + type: object + description: + Represents the internal channels of the ADC. + + properties: + reg: + items: + minimum: 0 + maximum: 15 + + required: + - reg + + unevaluatedProperties: false + +required: + - "#io-channel-cells" + - clocks + - compatible + - interrupts + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun20i-d1-ccu.h> + #include <dt-bindings/reset/sun20i-d1-ccu.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpadc: adc@2009000 { + compatible = "allwinner,sun20i-d1-gpadc"; + reg = <0x2009000 0x400>; + clocks = <&ccu CLK_BUS_GPADC>; + resets = <&ccu RST_BUS_GPADC>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml b/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml index e6a1f915b5..1f30a85691 100644 --- a/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml +++ b/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml @@ -56,8 +56,8 @@ properties: String corresponding to an identifier from atmel,adc-res-names property. If not specified, the highest resolution will be used. enum: - - "lowres" - - "highres" + - lowres + - highres atmel,adc-sleep-mode: $ref: /schemas/types.yaml#/definitions/flag diff --git a/dts/Bindings/iio/adc/ti,ads1015.yaml b/dts/Bindings/iio/adc/ti,ads1015.yaml index 2127d639a7..e004659099 100644 --- a/dts/Bindings/iio/adc/ti,ads1015.yaml +++ b/dts/Bindings/iio/adc/ti,ads1015.yaml @@ -78,9 +78,9 @@ patternProperties: ti,datarate: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 6 + maximum: 7 description: | - Data acquisition rate in samples per second + Data acquisition rate in samples per second for ADS1015, TLA2024 0: 128 1: 250 2: 490 @@ -88,6 +88,17 @@ patternProperties: 4: 1600 (default) 5: 2400 6: 3300 + 7: 3300 + + Data acquisition rate in samples per second for ADS1115 + 0: 8 + 1: 16 + 2: 32 + 3: 64 + 4: 128 (default) + 5: 250 + 6: 475 + 7: 860 required: - reg diff --git a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml index be93c109d6..8cbad7e792 100644 --- a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -57,7 +57,7 @@ description: | |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage |28 |PS Auxiliary voltage measurement (supply6). |Voltage |29 |PL VCCADC voltage measurement (vccams). |Voltage - |30 |Differential analog input signal voltage measurment. |Voltage + |30 |Differential analog input signal voltage measurement. |Voltage |31 |VUser0 voltage measurement (supply7). |Voltage |32 |VUser1 voltage measurement (supply8). |Voltage |33 |VUser2 voltage measurement (supply9). |Voltage diff --git a/dts/Bindings/iio/cdc/adi,ad7150.yaml b/dts/Bindings/iio/cdc/adi,ad7150.yaml index 2155d3f566..3d7074fd17 100644 --- a/dts/Bindings/iio/cdc/adi,ad7150.yaml +++ b/dts/Bindings/iio/cdc/adi,ad7150.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog device AD7150 and similar capacitance to digital convertors. +title: Analog device AD7150 and similar capacitance to digital converters. maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/dts/Bindings/iio/common.yaml b/dts/Bindings/iio/common.yaml index f845b41d74..b3a10af86d 100644 --- a/dts/Bindings/iio/common.yaml +++ b/dts/Bindings/iio/common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several iio - sensors. It doesn't constitue a device tree binding specification by itself but + sensors. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from sensor tree bindings the properties defined in this diff --git a/dts/Bindings/iio/dac/microchip,mcp4728.yaml b/dts/Bindings/iio/dac/microchip,mcp4728.yaml new file mode 100644 index 0000000000..99831d7f1c --- /dev/null +++ b/dts/Bindings/iio/dac/microchip,mcp4728.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP4728 DAC + +maintainers: + - Andrea Collamati <andrea.collamati@gmail.com> + +description: | + MCP4728 is a quad channel, 12-bit voltage output + Digital-to-Analog Converter with non-volatile + memory and I2C compatible Serial Interface. + https://www.microchip.com/en-us/product/mcp4728 + +properties: + compatible: + const: microchip,mcp4728 + + reg: + maxItems: 1 + + vdd-supply: + description: | + Provides both power and acts as the reference supply on the MCP4728 + when Internal Vref is not selected. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dac@60 { + compatible = "microchip,mcp4728"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + }; + }; diff --git a/dts/Bindings/iio/frequency/adi,admv1013.yaml b/dts/Bindings/iio/frequency/adi,admv1013.yaml index fc813bcb65..f2eb2287ed 100644 --- a/dts/Bindings/iio/frequency/adi,admv1013.yaml +++ b/dts/Bindings/iio/frequency/adi,admv1013.yaml @@ -39,6 +39,46 @@ properties: description: Analog voltage regulator. + vcc-drv-supply: + description: + RF Driver voltage regulator. + + vcc2-drv-supply: + description: + RF predriver voltage regulator. + + vcc-vva-supply: + description: + VVA Control Circuit voltage regulator. + + vcc-amp1-supply: + description: + RF Amplifier 1 voltage regulator. + + vcc-amp2-supply: + description: + RF Amplifier 2 voltage regulator. + + vcc-env-supply: + description: + Envelope Detector voltage regulator. + + vcc-bg-supply: + description: + Mixer Chip Band Gap Circuit voltage regulator. + + vcc-bg2-supply: + description: + VGA Chip Band Gap Circuit voltage regulator. + + vcc-mixer-supply: + description: + Mixer voltage regulator. + + vcc-quad-supply: + description: + Quadruppler voltage regulator. + adi,detector-enable: description: Enable the Envelope Detector available at output pins VENV_P and @@ -69,6 +109,16 @@ required: - clocks - clock-names - vcm-supply + - vcc-drv-supply + - vcc2-drv-supply + - vcc-vva-supply + - vcc-amp1-supply + - vcc-amp2-supply + - vcc-env-supply + - vcc-bg-supply + - vcc-bg2-supply + - vcc-mixer-supply + - vcc-quad-supply allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -87,6 +137,16 @@ examples: clocks = <&admv1013_lo>; clock-names = "lo_in"; vcm-supply = <&vcm>; + vcc-drv-supply = <&vcc_drv>; + vcc2-drv-supply = <&vcc2_drv>; + vcc-vva-supply = <&vcc_vva>; + vcc-amp1-supply = <&vcc_amp1>; + vcc-amp2-supply = <&vcc_amp2>; + vcc-env-supply = <&vcc_env>; + vcc-bg-supply = <&vcc_bg>; + vcc-bg2-supply = <&vcc_bg2>; + vcc-mixer-supply = <&vcc_mixer>; + vcc-quad-supply = <&vcc_quad>; adi,quad-se-mode = "diff"; adi,detector-enable; }; diff --git a/dts/Bindings/iio/frequency/adi,admv1014.yaml b/dts/Bindings/iio/frequency/adi,admv1014.yaml index ab86daa2c5..39cc63a117 100644 --- a/dts/Bindings/iio/frequency/adi,admv1014.yaml +++ b/dts/Bindings/iio/frequency/adi,admv1014.yaml @@ -33,7 +33,7 @@ properties: items: - const: lo_in description: - External clock that provides the Local Oscilator input. + External clock that provides the Local Oscillator input. vcm-supply: description: @@ -103,6 +103,14 @@ required: - clocks - clock-names - vcm-supply + - vcc-if-bb-supply + - vcc-vga-supply + - vcc-vva-supply + - vcc-lna-3p3-supply + - vcc-lna-1p5-supply + - vcc-bg-supply + - vcc-quad-supply + - vcc-mixer-supply allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/dts/Bindings/iio/humidity/ti,hdc2010.yaml b/dts/Bindings/iio/humidity/ti,hdc2010.yaml index a2bc1fa92d..79e75a8675 100644 --- a/dts/Bindings/iio/humidity/ti,hdc2010.yaml +++ b/dts/Bindings/iio/humidity/ti,hdc2010.yaml @@ -10,7 +10,7 @@ maintainers: - Eugene Zaikonnikov <ez@norophonic.com> description: | - Relative humidity and tempereature sensors on I2C bus + Relative humidity and temperature sensors on I2C bus Datasheets are available at: http://www.ti.com/product/HDC2010/datasheet diff --git a/dts/Bindings/iio/light/rohm,bu27010.yaml b/dts/Bindings/iio/light/rohm,bu27010.yaml new file mode 100644 index 0000000000..8376d64a64 --- /dev/null +++ b/dts/Bindings/iio/light/rohm,bu27010.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27010 color sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear, + IR and flickering detection) with five configurable channels. Red, green + and flickering detection being always available and two out of the rest + three (blue, clear, IR) can be selected to be simultaneously measured. + Typical application is adjusting LCD/OLED backlight of TVs, mobile phones + and tablet PCs. + +properties: + compatible: + const: rohm,bu27010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27010"; + reg = <0x38>; + }; + }; diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml index c0a923febf..b31f8120f1 100644 --- a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -47,7 +47,7 @@ properties: reset-gpios: description: Optional GPIO for resetting the device. - If not present the device is not resetted during the probe. + If not present the device is not reset during the probe. maxItems: 1 honeywell,pmin-pascal: diff --git a/dts/Bindings/iio/proximity/ams,as3935.yaml b/dts/Bindings/iio/proximity/ams,as3935.yaml index c999994e19..9567993ce4 100644 --- a/dts/Bindings/iio/proximity/ams,as3935.yaml +++ b/dts/Bindings/iio/proximity/ams,as3935.yaml @@ -10,7 +10,7 @@ maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> description: - This lightening distance sensor uses an I2C or SPI interface. The + This lightning distance sensor uses an I2C or SPI interface. The binding currently only covers the SPI option. properties: diff --git a/dts/Bindings/iio/proximity/murata,irsd200.yaml b/dts/Bindings/iio/proximity/murata,irsd200.yaml new file mode 100644 index 0000000000..67f5389ece --- /dev/null +++ b/dts/Bindings/iio/proximity/murata,irsd200.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata IRS-D200 PIR sensor + +maintainers: + - Waqar Hameed <waqar.hameed@axis.com> + +description: + PIR sensor for human detection. + +properties: + compatible: + const: murata,irsd200 + + reg: + items: + - enum: + - 0x48 + - 0x49 + description: | + When the AD pin is connected to GND, the slave address is 0x48. + When the AD pin is connected to VDD, the slave address is 0x49. + + interrupts: + maxItems: 1 + description: + Type should be IRQ_TYPE_EDGE_RISING. + + vdd-supply: + description: + 3.3 V supply voltage. + +required: + - compatible + - reg + - interrupts + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + proximity@48 { + compatible = "murata,irsd200"; + reg = <0x48>; + interrupts = <24 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <®ulator_3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/proximity/semtech,sx9310.yaml b/dts/Bindings/iio/proximity/semtech,sx9310.yaml index 5de0bb2180..775555d147 100644 --- a/dts/Bindings/iio/proximity/semtech,sx9310.yaml +++ b/dts/Bindings/iio/proximity/semtech,sx9310.yaml @@ -15,6 +15,9 @@ description: | Specifications about the devices can be found at: https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310 +allOf: + - $ref: /schemas/iio/iio.yaml# + properties: compatible: enum: @@ -102,7 +105,7 @@ required: - reg - "#io-channel-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/proximity/semtech,sx9324.yaml b/dts/Bindings/iio/proximity/semtech,sx9324.yaml index b3aa2ebf96..48f2214631 100644 --- a/dts/Bindings/iio/proximity/semtech,sx9324.yaml +++ b/dts/Bindings/iio/proximity/semtech,sx9324.yaml @@ -13,6 +13,9 @@ maintainers: description: | Semtech's SX9324 proximity sensor. +allOf: + - $ref: /schemas/iio/iio.yaml# + properties: compatible: const: semtech,sx9324 @@ -167,7 +170,7 @@ required: - reg - "#io-channel-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/st,st-sensors.yaml b/dts/Bindings/iio/st,st-sensors.yaml index e450821a74..fff7e3d83a 100644 --- a/dts/Bindings/iio/st,st-sensors.yaml +++ b/dts/Bindings/iio/st,st-sensors.yaml @@ -97,7 +97,7 @@ properties: interrupts: description: interrupt line(s) connected to the DRDY line(s) and/or the - Intertial interrupt lines INT1 and INT2 if these exist. This means up to + Inertial interrupt lines INT1 and INT2 if these exist. This means up to three interrupts, and the DRDY must be the first one if it exists on the package. The trigger edge of the interrupts is sometimes software configurable in the hardware so the operating system should parse this diff --git a/dts/Bindings/input/azoteq,iqs7222.yaml b/dts/Bindings/input/azoteq,iqs7222.yaml index 9ddba7f2e7..5b1769c19b 100644 --- a/dts/Bindings/input/azoteq,iqs7222.yaml +++ b/dts/Bindings/input/azoteq,iqs7222.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Azoteq IQS7222A/B/C Capacitive Touch Controller +title: Azoteq IQS7222A/B/C/D Capacitive Touch Controller maintainers: - Jeff LaBundy <jeff@labundy.com> description: | - The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch - controllers that feature additional sensing capabilities. + The Azoteq IQS7222A, IQS7222B, IQS7222C and IQS7222D are multichannel + capacitive touch controllers that feature additional sensing capabilities. Link to datasheets: https://www.azoteq.com/ @@ -21,6 +21,7 @@ properties: - azoteq,iqs7222a - azoteq,iqs7222b - azoteq,iqs7222c + - azoteq,iqs7222d reg: maxItems: 1 @@ -173,6 +174,152 @@ properties: maximum: 3000 description: Specifies the report rate (in ms) during ultra-low-power mode. + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + + trackpad: + type: object + description: Represents all channels associated with the trackpad. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 13 + description: + Specifies the order of the channels that participate in the trackpad. + Specify 255 to omit a given channel for the purpose of mapping a non- + rectangular trackpad. + + azoteq,num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of rows that comprise the trackpad. + + azoteq,num-cols: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of columns that comprise the trackpad. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is linearly reduced. + + azoteq,use-prox: + type: boolean + description: + Directs the trackpad to respond to the proximity states of the + selected channels instead of their corresponding touch states. + Note the trackpad cannot report granular coordinates during a + state of proximity. + + patternProperties: + "^azoteq,lower-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's lower starting points. + + "^azoteq,upper-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's upper starting points. + + "^event-(press|tap|(swipe|flick)-(x|y)-(pos|neg))$": + type: object + $ref: input.yaml# + description: + Represents a press or gesture event reported by the trackpad. Specify + 'linux,code' under the press event to report absolute coordinates. + + properties: + linux,code: true + + azoteq,gesture-angle-tighten: + type: boolean + description: + Limits the tangent of the gesture angle to 0.5 (axial gestures + only). If specified in one direction, the effect is applied in + either direction. + + azoteq,gesture-max-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all other swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the distance (in coordinates) across which a swipe or + flick gesture must travel in order to be acknowledged by the + device. The number specified for any one swipe or flick gesture + applies to all remaining swipe or flick gestures. + + For tap gestures, this property specifies the distance from the + original point of contact across which the contact is permitted + to travel before the gesture is rejected by the device. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 + 2: GPIO4 + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + trackpad gesture). + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + patternProperties: "^cycle-[0-9]$": type: object @@ -288,6 +435,10 @@ patternProperties: Activates the reference channel in response to proximity events instead of touch events. + azoteq,counts-filt-enable: + type: boolean + description: Applies counts filtering to the channel. + azoteq,ati-band: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] @@ -432,12 +583,12 @@ patternProperties: description: | Specifies one or more GPIO mapped to the event as follows: 0: GPIO0 - 1: GPIO3 (IQS7222C only) - 2: GPIO4 (IQS7222C only) + 1: GPIO3 + 2: GPIO4 Note that although multiple events can be mapped to a single GPIO, they must all be of the same type (proximity, touch or - slider gesture). + slider/trackpad gesture). azoteq,thresh: $ref: /schemas/types.yaml#/definitions/uint32 @@ -521,16 +672,16 @@ patternProperties: minimum: 0 maximum: 65535 description: - Specifies the speed of movement after which coordinate filtering is - no longer applied. + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is no longer applied. azoteq,bottom-speed: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 255 description: - Specifies the speed of movement after which coordinate filtering is - linearly reduced. + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is linearly reduced. azoteq,bottom-beta: $ref: /schemas/types.yaml#/definitions/uint32 @@ -595,10 +746,10 @@ patternProperties: minimum: 0 maximum: 4080 description: - Specifies the distance across which a swipe or flick gesture must - travel in order to be acknowledged by the device. The number spec- - ified for any one swipe or flick gesture applies to all remaining - swipe or flick gestures. + Specifies the distance (in coordinates) across which a swipe or + flick gesture must travel in order to be acknowledged by the + device. The number specified for any one swipe or flick gesture + applies to all remaining swipe or flick gestures. azoteq,gpio-select: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -610,8 +761,8 @@ patternProperties: description: | Specifies one or more GPIO mapped to the event as follows: 0: GPIO0 - 1: GPIO3 (IQS7222C only) - 2: GPIO4 (IQS7222C only) + 1: GPIO3 + 2: GPIO4 Note that although multiple events can be mapped to a single GPIO, they must all be of the same type (proximity, touch or @@ -629,8 +780,8 @@ patternProperties: description: | Represents a GPIO mapped to one or more events as follows: gpio-0: GPIO0 - gpio-1: GPIO3 (IQS7222C only) - gpio-2: GPIO4 (IQS7222C only) + gpio-1: GPIO3 + gpio-2: GPIO4 allOf: - $ref: ../pinctrl/pincfg-node.yaml# @@ -641,11 +792,53 @@ patternProperties: additionalProperties: false allOf: + - $ref: touchscreen/touchscreen.yaml# + - if: properties: compatible: contains: - const: azoteq,iqs7222b + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + properties: + touchscreen-size-x: false + touchscreen-size-y: false + touchscreen-inverted-x: false + touchscreen-inverted-y: false + touchscreen-swapped-x-y: false + + trackpad: false + + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,counts-filt-enable: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ulp-allow: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222d then: patternProperties: @@ -657,13 +850,22 @@ allOf: properties: azoteq,ref-select: false + "^slider-[0-1]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": patternProperties: "^event-(prox|touch)$": properties: azoteq,gpio-select: false - "^slider-[0-1]$": false - "^gpio-[0-2]$": false - if: @@ -704,10 +906,6 @@ allOf: else: patternProperties: - "^channel-([0-9]|1[0-9])$": - properties: - azoteq,ulp-allow: false - "^slider-[0-1]$": patternProperties: "^event-(press|tap|(swipe|flick)-(pos|neg))$": diff --git a/dts/Bindings/input/elan,ekth3000.yaml b/dts/Bindings/input/elan,ekth3000.yaml index 2a9bb6ace0..24dc2d6961 100644 --- a/dts/Bindings/input/elan,ekth3000.yaml +++ b/dts/Bindings/input/elan,ekth3000.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/input/elan,ekth3000.yaml# diff --git a/dts/Bindings/input/elan,ekth6915.yaml b/dts/Bindings/input/elan,ekth6915.yaml index 05e6f2df60..3e2d216c64 100644 --- a/dts/Bindings/input/elan,ekth6915.yaml +++ b/dts/Bindings/input/elan,ekth6915.yaml @@ -13,6 +13,9 @@ description: Supports the Elan eKTH6915 touchscreen controller. This touchscreen controller uses the i2c-hid protocol with a reset GPIO. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: items: @@ -24,6 +27,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. diff --git a/dts/Bindings/input/goodix,gt7375p.yaml b/dts/Bindings/input/goodix,gt7375p.yaml index 1edad1da11..358cb8275b 100644 --- a/dts/Bindings/input/goodix,gt7375p.yaml +++ b/dts/Bindings/input/goodix,gt7375p.yaml @@ -14,6 +14,9 @@ description: This touchscreen uses the i2c-hid protocol but has some non-standard power sequencing required. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: oneOf: @@ -30,6 +33,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: true diff --git a/dts/Bindings/input/hid-over-i2c.yaml b/dts/Bindings/input/hid-over-i2c.yaml index 7156b08f76..138caad96a 100644 --- a/dts/Bindings/input/hid-over-i2c.yaml +++ b/dts/Bindings/input/hid-over-i2c.yaml @@ -44,6 +44,8 @@ properties: description: HID descriptor address $ref: /schemas/types.yaml#/definitions/uint32 + panel: true + post-power-on-delay-ms: description: Time required by the device after enabling its regulators or powering it on, before it is ready for communication. diff --git a/dts/Bindings/input/ilitek,ili9882t.yaml b/dts/Bindings/input/ilitek,ili9882t.yaml new file mode 100644 index 0000000000..c5d9e0e919 --- /dev/null +++ b/dts/Bindings/input/ilitek,ili9882t.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ili9882t touchscreen controller + +maintainers: + - Cong Yang <yangcong5@huaqin.corp-partner.google.com> + +description: + Supports the Ilitek ili9882t touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + const: ilitek,ili9882t + + reg: + const: 0x41 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + description: Reset GPIO. + + vccio-supply: + description: The 1.8V supply to the touchscreen. + +required: + - compatible + - reg + - interrupts + - panel + - vccio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: touchscreen@41 { + compatible = "ilitek,ili9882t"; + reg = <0x41>; + + interrupt-parent = <&pio>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + panel = <&panel>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vccio-supply = <&mt6366_vio18_reg>; + }; + }; diff --git a/dts/Bindings/input/rmi4/rmi_2d_sensor.txt b/dts/Bindings/input/rmi4/rmi_2d_sensor.txt deleted file mode 100644 index 9afffbdf6e..0000000000 --- a/dts/Bindings/input/rmi4/rmi_2d_sensor.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 2D Sensor Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain 2D sensors using Function 11 or -Function 12. Complete documentation for transports and other functions -can be found in: -Documentation/devicetree/bindings/input/rmi4. - -RMI4 Function 11 and Function 12 are for 2D touch position sensing. -Additional documentation for F11 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touchscreen -- touchscreen-inverted-x -- touchscreen-inverted-y -- touchscreen-swapped-x-y -- touchscreen-x-mm -- touchscreen-y-mm - -Optional Properties: -- syna,clip-x-low: Sets a minimum value for X. -- syna,clip-y-low: Sets a minimum value for Y. -- syna,clip-x-high: Sets a maximum value for X. -- syna,clip-y-high: Sets a maximum value for Y. -- syna,offset-x: Add an offset to X. -- syna,offset-y: Add an offset to Y. -- syna,delta-x-threshold: Set the minimum distance on the X axis required - to generate an interrupt in reduced reporting - mode. -- syna,delta-y-threshold: Set the minimum distance on the Y axis required - to generate an interrupt in reduced reporting - mode. -- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad. -- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to - disable reporing absolute position data. -- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero - command. - - -Example of a RMI4 I2C device with F11: -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/dts/Bindings/input/rmi4/rmi_f01.txt b/dts/Bindings/input/rmi4/rmi_f01.txt deleted file mode 100644 index 079cad2b68..0000000000 --- a/dts/Bindings/input/rmi4/rmi_f01.txt +++ /dev/null @@ -1,39 +0,0 @@ -Synaptics RMI4 F01 Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain Function 1. Complete documentation -for transports and other functions can be found in: -Documentation/devicetree/bindings/input/rmi4. - -Additional documentation for F01 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Properties: -- syna,nosleep-mode: If set the device will run at full power without sleeping. - nosleep has 3 modes, 0 will not change the default - setting, 1 will disable nosleep (allow sleeping), - and 2 will enable nosleep (disabling sleep). -- syna,wakeup-threshold: Defines the amplitude of the disturbance to the - background capacitance that will cause the - device to wake from dozing. -- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the - first doze cycle. -- syna,doze-interval-ms: The time period that the device sleeps between finger - activity. - - -Example of a RMI4 I2C device with F01: - Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - }; - }; diff --git a/dts/Bindings/input/rmi4/rmi_i2c.txt b/dts/Bindings/input/rmi4/rmi_i2c.txt deleted file mode 100644 index dcb012f5b3..0000000000 --- a/dts/Bindings/input/rmi4/rmi_i2c.txt +++ /dev/null @@ -1,61 +0,0 @@ -Synaptics RMI4 I2C Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the I2C transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-i2c -- reg: I2C address -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- syna,reset-delay-ms: The number of milliseconds to wait after resetting the - device. - -- syna,startup-delay-ms: The number of milliseconds to wait after powering on - the device. - -- vdd-supply: VDD power supply. -See ../regulator/regulator.txt - -- vio-supply: VIO power supply -See ../regulator/regulator.txt - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/dts/Bindings/input/rmi4/rmi_spi.txt b/dts/Bindings/input/rmi4/rmi_spi.txt deleted file mode 100644 index 632f473db6..0000000000 --- a/dts/Bindings/input/rmi4/rmi_spi.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 SPI Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the SPI transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-spi -- reg: Chip select address for the device -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- spi-rx-delay-us: microsecond delay after a read transfer. -- spi-tx-delay-us: microsecond delay after a write transfer. - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - spi@7000d800 { - rmi4-spi-dev@0 { - compatible = "syna,rmi4-spi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <4000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(K, 2) 0x2>; - spi-rx-delay-us = <30>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/dts/Bindings/input/stmpe-keypad.txt b/dts/Bindings/input/stmpe-keypad.txt deleted file mode 100644 index 12bb771d66..0000000000 --- a/dts/Bindings/input/stmpe-keypad.txt +++ /dev/null @@ -1,41 +0,0 @@ -* STMPE Keypad - -Required properties: - - compatible : "st,stmpe-keypad" - - linux,keymap : See ./matrix-keymap.txt - -Optional properties: - - debounce-interval : Debouncing interval time in milliseconds - - st,scan-count : Scanning cycles elapsed before key data is updated - - st,no-autorepeat : If specified device will not autorepeat - - keypad,num-rows : See ./matrix-keymap.txt - - keypad,num-columns : See ./matrix-keymap.txt - -Example: - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; diff --git a/dts/Bindings/input/syna,rmi4.yaml b/dts/Bindings/input/syna,rmi4.yaml new file mode 100644 index 0000000000..4d4e1a8e36 --- /dev/null +++ b/dts/Bindings/input/syna,rmi4.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/syna,rmi4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics RMI4 compliant devices + +maintainers: + - Jason A. Donenfeld <Jason@zx2c4.com> + - Matthias Schiffer <matthias.schiffer@ew.tq-group.com + - Vincent Huang <vincent.huang@tw.synaptics.com> + +description: | + The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4 + devices using different transports (I2C, SPI) and different functions (e.g. + Function 1, 2D sensors using Function 11 or 12). + +properties: + compatible: + enum: + - syna,rmi4-i2c + - syna,rmi4-spi + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Active low signal + + spi-cpha: true + spi-cpol: true + + syna,reset-delay-ms: + description: + Delay to wait after resetting the device. + + syna,startup-delay-ms: + description: + Delay to wait after powering on the device. + + vdd-supply: true + vio-supply: true + + rmi4-f01@1: + type: object + additionalProperties: false + description: + Function 1 + + properties: + reg: + maxItems: 1 + + syna,nosleep-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + If set the device will run at full power without sleeping. nosleep + has 3 modes, 0 will not change the default setting, 1 will disable + nosleep (allow sleeping), and 2 will enable nosleep (disabling + sleep). + + syna,wakeup-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the amplitude of the disturbance to the background + capacitance that will cause the device to wake from dozing. + + syna,doze-holdoff-ms: + description: + The delay to wait after the last finger lift and the first doze + cycle. + + syna,doze-interval-ms: + description: + The time period that the device sleeps between finger activity. + + required: + - reg + +patternProperties: + "^rmi4-f1[12]@1[12]$": + type: object + unevaluatedProperties: false + $ref: /schemas/input/touchscreen/touchscreen.yaml# + description: + RMI4 Function 11 and Function 12 are for 2D touch position sensing. + + properties: + reg: + maxItems: 1 + + syna,clip-x-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for X. + + syna,clip-y-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for Y. + + syna,clip-x-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for X. + + syna,clip-y-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for Y. + + syna,offset-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to X. + + syna,offset-y: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to Y. + + syna,delta-x-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the X axis required to generate an interrupt in + reduced reporting mode. + + syna,delta-y-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the Y axis required to generate an interrupt in + reduced reporting mode. + + syna,sensor-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: | + Sensor type: 1 for touchscreen 2 for touchpad. + + syna,disable-report-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mask for disabling posiiton reporting. Used to disable reporing + absolute position data. + + syna,rezero-wait-ms: + description: + Time to wait after issuing a rezero command. + + required: + - reg + + "^rmi4-f[0-9a-f]+@[0-9a-f]+$": + type: object + description: + Other functions, not documented yet. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: syna,rmi4-i2c + then: + properties: + spi-rx-delay-us: false + spi-tx-delay-us: false + else: + properties: + syna,reset-delay-ms: false + syna,startup-delay-ms: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + syna,startup-delay-ms = <100>; + vdd-supply = <&tsp_vdd>; + vio-supply = <&ldo32_reg>; + + pinctrl-0 = <&touch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <4000000>; + spi-rx-delay-us = <30>; + spi-cpha; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/dts/Bindings/input/touchscreen/azoteq,iqs7211.yaml b/dts/Bindings/input/touchscreen/azoteq,iqs7211.yaml new file mode 100644 index 0000000000..8cf371b99f --- /dev/null +++ b/dts/Bindings/input/touchscreen/azoteq,iqs7211.yaml @@ -0,0 +1,769 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs7211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7210A/7211A/E Trackpad/Touchscreen Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS7210A, IQS7211A and IQS7211E trackpad and touchscreen control- + lers employ projected-capacitance sensing and can track two contacts. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7210a + - azoteq,iqs7211a + - azoteq,iqs7211e + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. The + pin doubles as the IQS7211E's active-low MCLR input, in which case this + GPIO must be configured as open-drain. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + azoteq,forced-comms: + type: boolean + description: + Enables forced communication; to be used with host adapters that cannot + tolerate clock stretching. + + azoteq,forced-comms-default: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicates if the device's OTP memory enables (1) or disables (0) forced + communication by default. Specifying this property can expedite startup + time if the default value is known. + + If this property is not specified, communication is not initiated until + the device asserts its RDY pin shortly after exiting hardware reset. At + that point, forced communication is either enabled or disabled based on + the presence or absence of the 'azoteq,forced-comms' property. + + azoteq,rate-active-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during active mode. + + azoteq,rate-touch-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during idle-touch mode. + + azoteq,rate-idle-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during idle mode. + + azoteq,rate-lp1-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during low-power mode 1. + + azoteq,rate-lp2-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during low-power mode 2. + + azoteq,timeout-active-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from active mode to idle or idle-touch modes. + + azoteq,timeout-touch-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from idle-touch mode to idle mode. + + azoteq,timeout-idle-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from idle mode to low-power mode 1. + + azoteq,timeout-lp1-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode 1 to low-power mode 2. + + azoteq,timeout-lp2-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the rate (in ms) at which the trackpad reference values + are updated during low-power modes 1 and 2. + + azoteq,timeout-ati-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the delay (in ms) before the automatic tuning implementation + (ATI) is retried in the event it fails to complete. + + azoteq,timeout-comms-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the delay (in ms) before a communication window is closed. + + azoteq,timeout-press-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + azoteq,fosc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the device's core clock frequency as follows: + 0: 14 MHz + 1: 18 MHz + + azoteq,fosc-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the device's core clock frequency trim. + + azoteq,num-contacts: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 + description: Specifies the number of contacts reported by the device. + + azoteq,contact-split: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the contact (finger) split factor. + + azoteq,trim-x: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the horizontal trim width. + + azoteq,trim-y: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the vertical trim height. + + trackpad: + type: object + description: Represents all channels associated with the trackpad. + + properties: + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the order of the CRx pin(s) associated with the trackpad. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 11 + description: + Specifies the order of the CTx pin(s) associated with the trackpad. + + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 36 + items: + minimum: 0 + maximum: 255 + description: | + Specifies the channels mapped to each cycle in the following order: + Cycle 0, slot 0 + Cycle 0, slot 1 + Cycle 1, slot 0 + Cycle 1, slot 1 + ...and so on. Specify 255 to disable a given slot. + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the trackpad's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the trackpad's ATI target. + + azoteq,touch-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's touch entrance factor. + + azoteq,touch-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's touch exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's stationary touch threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's conversion frequency fraction. + + patternProperties: + "^event-(tap(-double|-triple)?|hold|palm|swipe-(x|y)-(pos|neg)(-hold)?)$": + type: object + $ref: ../input.yaml# + description: + Represents a gesture event reported by the trackpad. In the case of + axial gestures, the duration or distance specified in one direction + applies to both directions along the same axis. + + properties: + linux,code: true + + azoteq,gesture-max-ms: + minimum: 0 + maximum: 65535 + description: Specifies the maximum duration of tap/swipe gestures. + + azoteq,gesture-mid-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the maximum duration between subsequent tap gestures + (IQS7211E only). + + azoteq,gesture-min-ms: + minimum: 0 + maximum: 65535 + description: Specifies the minimum duration of hold gestures. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the minimum (swipe) or maximum (tap and hold) distance + a finger may travel to be considered a gesture. + + azoteq,gesture-dist-rep: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the minimum distance a finger must travel to elicit a + repeated swipe gesture (IQS7211E only). + + azoteq,gesture-angle: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 75 + description: + Specifies the maximum angle (in degrees) a finger may travel to + be considered a swipe gesture. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 42 + description: Specifies the palm gesture threshold (IQS7211E only). + + additionalProperties: false + + dependencies: + azoteq,rx-enable: ["azoteq,tx-enable"] + azoteq,tx-enable: ["azoteq,rx-enable"] + azoteq,channel-select: ["azoteq,rx-enable"] + + additionalProperties: false + + alp: + type: object + $ref: ../input.yaml# + description: Represents the alternate low-power channel (ALP). + + properties: + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRx pin(s) associated with the ALP in no particular + order. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 11 + description: + Specifies the CTx pin(s) associated with the ALP in no particular + order. + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the ALP's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the ALP's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 255 + description: Specifies the ALP's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the ALP's ATI mode as follows: + 0: Partial + 1: Full + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the ALP's sensing mode as follows: + 0: Self capacitive + 1: Mutual capacitive + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's debounce exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the ALP's proximity or touch threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's conversion frequency fraction. + + linux,code: true + + additionalProperties: false + + button: + type: object + description: Represents the inductive or capacitive button. + + properties: + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the button's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the button's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 255 + description: Specifies the button's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the button's ATI mode as follows: + 0: Partial + 1: Full + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + Specifies the button's sensing mode as follows: + 0: Self capacitive + 1: Mutual capacitive + 2: Inductive + + azoteq,touch-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's touch entrance factor. + + azoteq,touch-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's touch exit factor. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's debounce exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the button's proximity threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's conversion frequency fraction. + + patternProperties: + "^event-(prox|touch)$": + type: object + $ref: ../input.yaml# + description: + Represents a proximity or touch event reported by the button. + + properties: + linux,code: true + + additionalProperties: false + + additionalProperties: false + + wakeup-source: true + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +dependencies: + touchscreen-size-x: ["azoteq,num-contacts"] + touchscreen-size-y: ["azoteq,num-contacts"] + touchscreen-inverted-x: ["azoteq,num-contacts"] + touchscreen-inverted-y: ["azoteq,num-contacts"] + touchscreen-swapped-x-y: ["azoteq,num-contacts"] + +required: + - compatible + - reg + - irq-gpios + +additionalProperties: false + +allOf: + - $ref: touchscreen.yaml# + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7210a + + then: + properties: + alp: + properties: + azoteq,rx-enable: + maxItems: 4 + items: + minimum: 4 + + else: + properties: + azoteq,timeout-press-ms: false + + alp: + properties: + azoteq,ati-mode: false + + button: false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7211e + + then: + properties: + reset-gpios: false + + trackpad: + properties: + azoteq,tx-enable: + maxItems: 13 + items: + maximum: 12 + + alp: + properties: + azoteq,tx-enable: + maxItems: 13 + items: + maximum: 12 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@56 { + compatible = "azoteq,iqs7210a"; + reg = <0x56>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 17 (GPIO_ACTIVE_LOW | + GPIO_PUSH_PULL)>; + azoteq,num-contacts = <2>; + + trackpad { + azoteq,rx-enable = <6>, <5>, <4>, <3>, <2>; + azoteq,tx-enable = <1>, <7>, <8>, <9>, <10>; + }; + + button { + azoteq,sense-mode = <2>; + azoteq,touch-enter = <40>; + azoteq,touch-exit = <36>; + + event-touch { + linux,code = <KEY_HOME>; + }; + }; + + alp { + azoteq,sense-mode = <1>; + linux,code = <KEY_POWER>; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@56 { + compatible = "azoteq,iqs7211e"; + reg = <0x56>; + irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW | + GPIO_OPEN_DRAIN)>; + + trackpad { + event-tap { + linux,code = <KEY_PLAYPAUSE>; + }; + + event-tap-double { + linux,code = <KEY_SHUFFLE>; + }; + + event-tap-triple { + linux,code = <KEY_AGAIN>; + }; + + event-hold { + linux,code = <KEY_STOP>; + }; + + event-palm { + linux,code = <KEY_EXIT>; + }; + + event-swipe-x-pos { + linux,code = <KEY_REWIND>; + }; + + event-swipe-x-pos-hold { + linux,code = <KEY_PREVIOUS>; + }; + + event-swipe-x-neg { + linux,code = <KEY_FASTFORWARD>; + }; + + event-swipe-x-neg-hold { + linux,code = <KEY_NEXT>; + }; + + event-swipe-y-pos { + linux,code = <KEY_VOLUMEUP>; + }; + + event-swipe-y-pos-hold { + linux,code = <KEY_MUTE>; + }; + + event-swipe-y-neg { + linux,code = <KEY_VOLUMEDOWN>; + }; + + event-swipe-y-neg-hold { + linux,code = <KEY_MUTE>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.yaml b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml index ef4c841387..f2808cb4d9 100644 --- a/dts/Bindings/input/touchscreen/edt-ft5x06.yaml +++ b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml @@ -93,6 +93,12 @@ properties: minimum: 1 maximum: 255 + threshold: + description: Allows setting the "click"-threshold in the range from 0 to 255. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true diff --git a/dts/Bindings/input/touchscreen/eeti,exc3000.yaml b/dts/Bindings/input/touchscreen/eeti,exc3000.yaml index 007adbc89c..9dc25d30a0 100644 --- a/dts/Bindings/input/touchscreen/eeti,exc3000.yaml +++ b/dts/Bindings/input/touchscreen/eeti,exc3000.yaml @@ -24,6 +24,8 @@ properties: maxItems: 1 reset-gpios: maxItems: 1 + vdd-supply: + description: Power supply regulator for the chip touchscreen-size-x: true touchscreen-size-y: true touchscreen-inverted-x: true diff --git a/dts/Bindings/input/touchscreen/melfas,mms114.yaml b/dts/Bindings/input/touchscreen/melfas,mms114.yaml index fdd02898e2..07f9dd6b1c 100644 --- a/dts/Bindings/input/touchscreen/melfas,mms114.yaml +++ b/dts/Bindings/input/touchscreen/melfas,mms114.yaml @@ -52,6 +52,11 @@ properties: touchscreen-swapped-x-y: true touchscreen-max-pressure: true + linux,keycodes: + description: Keycodes for the touch keys + minItems: 1 + maxItems: 15 + additionalProperties: false required: diff --git a/dts/Bindings/input/touchscreen/stmpe.txt b/dts/Bindings/input/touchscreen/stmpe.txt deleted file mode 100644 index 238b51555c..0000000000 --- a/dts/Bindings/input/touchscreen/stmpe.txt +++ /dev/null @@ -1,108 +0,0 @@ -STMPE Touchscreen ----------------- - -Required properties: - - compatible: "st,stmpe-ts" - -Optional properties: -- st,ave-ctrl : Sample average control - 0 -> 1 sample - 1 -> 2 samples - 2 -> 4 samples - 3 -> 8 samples -- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) - 0 -> 10 us - 1 -> 50 us - 2 -> 100 us - 3 -> 500 us - 4 -> 1 ms - 5 -> 5 ms - 6 -> 10 ms - 7 -> 50 ms -- st,settling : Panel driver settling time (recommended is 2) - 0 -> 10 us - 1 -> 100 us - 2 -> 500 us - 3 -> 1 ms - 4 -> 5 ms - 5 -> 10 ms - 6 -> 50 ms - 7 -> 100 ms -- st,fraction-z : Length of the fractional part in z (recommended is 7) - (fraction-z ([0..7]) = Count of the fractional part) -- st,i-drive : current limit value of the touchscreen drivers - 0 -> 20 mA (typical 35mA max) - 1 -> 50 mA (typical 80 mA max) - -Optional properties common with MFD (deprecated): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 124 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal - 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - -Node should be child node of stmpe node to which it belongs. - -Note that common ADC settings of stmpe_touchscreen (child) will take precedence -over the settings done in MFD. - -Example: - -stmpe811@41 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; - interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; - /* Common ADC settings */ - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - }; - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; - }; -}; diff --git a/dts/Bindings/input/touchscreen/touchscreen.yaml b/dts/Bindings/input/touchscreen/touchscreen.yaml index 895592da96..431c13335c 100644 --- a/dts/Bindings/input/touchscreen/touchscreen.yaml +++ b/dts/Bindings/input/touchscreen/touchscreen.yaml @@ -10,6 +10,13 @@ maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + touchscreen-min-x: description: minimum x coordinate reported $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/dts/Bindings/input/touchscreen/tsc2007.txt b/dts/Bindings/input/touchscreen/tsc2007.txt index ed00f61b8c..210486a3fb 100644 --- a/dts/Bindings/input/touchscreen/tsc2007.txt +++ b/dts/Bindings/input/touchscreen/tsc2007.txt @@ -6,7 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms. Optional properties: -- gpios: the interrupt gpio the chip is connected to (trough the penirq pin). +- gpios: the interrupt gpio the chip is connected to (through the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). - interrupts: (gpio) interrupt to which the chip is connected diff --git a/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml b/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml index 5d17bdcfdf..73f809cdb7 100644 --- a/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/dts/Bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -25,14 +25,20 @@ properties: - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: + - qcom,sc7180-cpu-bwmon - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon - qcom,sdm845-cpu-bwmon + - qcom,sm6350-llcc-bwmon + - qcom,sm8250-cpu-bwmon - qcom,sm8550-cpu-bwmon - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: + - qcom,sc7180-llcc-bwmon - qcom,sc8280xp-llcc-bwmon + - qcom,sm6350-cpu-bwmon + - qcom,sm8250-llcc-bwmon - qcom,sm8550-llcc-bwmon - const: qcom,sc7280-llcc-bwmon - const: qcom,sc7280-llcc-bwmon # BWMON v5 diff --git a/dts/Bindings/interconnect/qcom,osm-l3.yaml b/dts/Bindings/interconnect/qcom,osm-l3.yaml index 9d0a98d77a..21dae0b928 100644 --- a/dts/Bindings/interconnect/qcom,osm-l3.yaml +++ b/dts/Bindings/interconnect/qcom,osm-l3.yaml @@ -21,6 +21,7 @@ properties: - enum: - qcom,sc7180-osm-l3 - qcom,sc8180x-osm-l3 + - qcom,sdm670-osm-l3 - qcom,sdm845-osm-l3 - qcom,sm6350-osm-l3 - qcom,sm8150-osm-l3 diff --git a/dts/Bindings/interconnect/qcom,rpmh.yaml b/dts/Bindings/interconnect/qcom,rpmh.yaml index 4d93ad415e..a46497af1f 100644 --- a/dts/Bindings/interconnect/qcom,rpmh.yaml +++ b/dts/Bindings/interconnect/qcom,rpmh.yaml @@ -18,9 +18,6 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. -allOf: - - $ref: qcom,rpmh-common.yaml# - properties: reg: maxItems: 1 @@ -91,6 +88,7 @@ properties: - qcom,sm8250-mc-virt - qcom,sm8250-mmss-noc - qcom,sm8250-npu-noc + - qcom,sm8250-qup-virt - qcom,sm8250-system-noc - qcom,sm8350-aggre1-noc - qcom,sm8350-aggre2-noc @@ -107,7 +105,19 @@ properties: required: - compatible - - reg + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + not: + properties: + compatible: + enum: + - qcom,sm8250-qup-virt + then: + required: + - reg + unevaluatedProperties: false diff --git a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index e84e4f33b3..3d06db98e9 100644 --- a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -35,6 +35,7 @@ properties: - amlogic,meson-sm1-gpio-intc - amlogic,meson-a1-gpio-intc - amlogic,meson-s4-gpio-intc + - amlogic,c3-gpio-intc - const: amlogic,meson-gpio-intc reg: diff --git a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml index 39e64c7f63..2bc38479a4 100644 --- a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml +++ b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml @@ -49,7 +49,7 @@ properties: The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. Extented SPI interrupts are in the range [0-1023]. + range [0-15]. Extended SPI interrupts are in the range [0-1023]. Extended PPI interrupts are in the range [0-127]. The 3rd cell is the flags, encoded as follows: diff --git a/dts/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/dts/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt index 2a1d16bdf8..ea939f54c5 100644 --- a/dts/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt +++ b/dts/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt @@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each instance can handle up to 32 interrupts. Required properties: -- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq" +- compatible: "arm,versatile-fpga-irq" - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: The number of cells to define the interrupts. Must be 1 as the FPGA IRQ controller has no configuration options for interrupt @@ -19,6 +19,8 @@ Required properties: the system till not make it possible for devices to request these interrupts. +The "oxsemi,ox810se-rps-irq" compatible is deprecated. + Example: pic: pic@14000000 { diff --git a/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 0f1af5a1c1..bdd173056f 100644 --- a/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/dts/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -70,7 +70,7 @@ Bank 1: 25: DMA9 26: DMA10 27: DMA11-14 - shared interrupt for DMA 11 to 14 -28: DMAALL - triggers on all dma interrupts (including chanel 15) +28: DMAALL - triggers on all dma interrupts (including channel 15) 29: AUX 30: ARM 31: VPUDMA diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml index c680de1cbd..786f242639 100644 --- a/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml +++ b/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -59,7 +59,7 @@ description: > .. 31 ........................ X - The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms + The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms on many BCM338x/BCM63xx chipsets. It has the following properties: - outputs a single interrupt signal to its interrupt controller parent diff --git a/dts/Bindings/interrupt-controller/qcom,pdc.yaml b/dts/Bindings/interrupt-controller/qcom,pdc.yaml index a106ba6e81..4847b04be1 100644 --- a/dts/Bindings/interrupt-controller/qcom,pdc.yaml +++ b/dts/Bindings/interrupt-controller/qcom,pdc.yaml @@ -31,6 +31,7 @@ properties: - qcom,sc7180-pdc - qcom,sc7280-pdc - qcom,sc8280xp-pdc + - qcom,sdm670-pdc - qcom,sdm845-pdc - qcom,sdx55-pdc - qcom,sdx65-pdc diff --git a/dts/Bindings/interrupt-controller/st,sti-irq-syscfg.txt b/dts/Bindings/interrupt-controller/st,sti-irq-syscfg.txt deleted file mode 100644 index 977d7ed367..0000000000 --- a/dts/Bindings/interrupt-controller/st,sti-irq-syscfg.txt +++ /dev/null @@ -1,30 +0,0 @@ -STMicroelectronics STi System Configuration Controlled IRQs ------------------------------------------------------------ - -On STi based systems; External, CTI (Core Sight), PMU (Performance Management), -and PL310 L2 Cache IRQs are controlled using System Configuration registers. -This driver is used to unmask them prior to use. - -Required properties: -- compatible : Should be "st,stih407-irq-syscfg" -- st,syscfg : Phandle to Cortex-A9 IRQ system config registers -- st,irq-device : Array of IRQs to enable - should be 2 in length -- st,fiq-device : Array of FIQs to enable - should be 2 in length - -Optional properties: -- st,invert-ext : External IRQs can be inverted at will. This property inverts - these IRQs using bitwise logic. A number of defines have been - provided for convenience: - ST_IRQ_SYSCFG_EXT_1_INV - ST_IRQ_SYSCFG_EXT_2_INV - ST_IRQ_SYSCFG_EXT_3_INV -Example: - -irq-syscfg { - compatible = "st,stih407-irq-syscfg"; - st,syscfg = <&syscfg_cpu>; - st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, - <ST_IRQ_SYSCFG_PMU_1>; - st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, - <ST_IRQ_SYSCFG_DISABLED>; -}; diff --git a/dts/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/dts/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml new file mode 100644 index 0000000000..2b153d7c54 --- /dev/null +++ b/dts/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi System Configuration Controlled IRQs + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +description: + On STi based systems; External, CTI (Core Sight), PMU (Performance + Management), and PL310 L2 Cache IRQs are controlled using System + Configuration registers. This device is used to unmask them prior to use. + +properties: + compatible: + const: st,stih407-irq-syscfg + + st,syscfg: + description: Phandle to Cortex-A9 IRQ system config registers + $ref: /schemas/types.yaml#/definitions/phandle + + st,irq-device: + description: Array of IRQs to enable. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Enable the IRQ of the channel one. + - description: Enable the IRQ of the channel two. + + st,fiq-device: + description: Array of FIQs to enable. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Enable the IRQ of the channel one. + - description: Enable the IRQ of the channel two. + + st,invert-ext: + description: External IRQs can be inverted at will. This property inverts + these three IRQs using bitwise logic, each one being encoded respectively + on the first, second and fourth bit. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4, 5, 6 ] + +required: + - compatible + - st,syscfg + - st,irq-device + - st,fiq-device + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq-st.h> + irq-syscfg { + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; +... diff --git a/dts/Bindings/interrupt-controller/ti,pruss-intc.yaml b/dts/Bindings/interrupt-controller/ti,pruss-intc.yaml index 65523d9459..3cd5a1822e 100644 --- a/dts/Bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/dts/Bindings/interrupt-controller/ti,pruss-intc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# diff --git a/dts/Bindings/iommu/arm,smmu.yaml b/dts/Bindings/iommu/arm,smmu.yaml index 3a31a97970..cf29ab1050 100644 --- a/dts/Bindings/iommu/arm,smmu.yaml +++ b/dts/Bindings/iommu/arm,smmu.yaml @@ -270,6 +270,47 @@ allOf: contains: enum: - qcom,msm8998-smmu-v2 + then: + anyOf: + - properties: + clock-names: + items: + - const: bus + clocks: + items: + - description: bus clock required for downstream bus access and for + the smmu ptw + - properties: + clock-names: + items: + - const: iface + - const: mem + - const: mem_iface + clocks: + items: + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for memory access + - description: bus clock required for GPU memory access + - properties: + clock-names: + items: + - const: iface-mm + - const: iface-smmu + - const: bus-smmu + clocks: + items: + - description: interface clock required to access mnoc's registers + through the TCU's programming interface. + - description: interface clock required to access smmu's registers + through the TCU's programming interface. + - description: bus clock required for the smmu ptw + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm630-smmu-v2 - qcom,sm6375-smmu-v2 then: diff --git a/dts/Bindings/iommu/mediatek,iommu.yaml b/dts/Bindings/iommu/mediatek,iommu.yaml index 5b6395bc10..ea6b0f5f24 100644 --- a/dts/Bindings/iommu/mediatek,iommu.yaml +++ b/dts/Bindings/iommu/mediatek,iommu.yaml @@ -78,6 +78,9 @@ properties: - mediatek,mt8173-m4u # generation two - mediatek,mt8183-m4u # generation two - mediatek,mt8186-iommu-mm # generation two + - mediatek,mt8188-iommu-vdo # generation two + - mediatek,mt8188-iommu-vpp # generation two + - mediatek,mt8188-iommu-infra # generation two - mediatek,mt8192-m4u # generation two - mediatek,mt8195-iommu-vdo # generation two - mediatek,mt8195-iommu-vpp # generation two @@ -123,6 +126,7 @@ properties: description: | This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in + dt-binding/memory/mediatek,mt8188-memory-port.h for mt8188, dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623, dt-binding/memory/mt2712-larb-port.h for mt2712, dt-binding/memory/mt6779-larb-port.h for mt6779, @@ -155,6 +159,8 @@ allOf: - mediatek,mt6795-m4u - mediatek,mt8173-m4u - mediatek,mt8186-iommu-mm + - mediatek,mt8188-iommu-vdo + - mediatek,mt8188-iommu-vpp - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -168,6 +174,8 @@ allOf: compatible: enum: - mediatek,mt8186-iommu-mm + - mediatek,mt8188-iommu-vdo + - mediatek,mt8188-iommu-vpp - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -194,7 +202,9 @@ allOf: properties: compatible: contains: - const: mediatek,mt8195-iommu-infra + enum: + - mediatek,mt8188-iommu-infra + - mediatek,mt8195-iommu-infra then: required: diff --git a/dts/Bindings/iommu/qcom,iommu.yaml b/dts/Bindings/iommu/qcom,iommu.yaml index d9fabdf930..a74eb899c3 100644 --- a/dts/Bindings/iommu/qcom,iommu.yaml +++ b/dts/Bindings/iommu/qcom,iommu.yaml @@ -17,11 +17,16 @@ description: | properties: compatible: - items: - - enum: - - qcom,msm8916-iommu - - qcom,msm8953-iommu - - const: qcom,msm-iommu-v1 + oneOf: + - items: + - enum: + - qcom,msm8916-iommu + - qcom,msm8953-iommu + - const: qcom,msm-iommu-v1 + - items: + - enum: + - qcom,msm8976-iommu + - const: qcom,msm-iommu-v2 clocks: items: @@ -64,6 +69,8 @@ patternProperties: enum: - qcom,msm-iommu-v1-ns - qcom,msm-iommu-v1-sec + - qcom,msm-iommu-v2-ns + - qcom,msm-iommu-v2-sec interrupts: maxItems: 1 @@ -71,6 +78,11 @@ patternProperties: reg: maxItems: 1 + qcom,ctx-asid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ASID number associated to the context bank. + required: - compatible - interrupts diff --git a/dts/Bindings/iommu/xen,grant-dma.yaml b/dts/Bindings/iommu/xen,grant-dma.yaml index be1539d234..3528b81daa 100644 --- a/dts/Bindings/iommu/xen,grant-dma.yaml +++ b/dts/Bindings/iommu/xen,grant-dma.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# diff --git a/dts/Bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/dts/Bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml index 4ff6fabfcb..129e32c4c7 100644 --- a/dts/Bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml +++ b/dts/Bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -41,7 +41,7 @@ properties: - description: STR register aspeed,lpc-io-reg: - $ref: '/schemas/types.yaml#/definitions/uint32-array' + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 2 description: | @@ -50,7 +50,7 @@ properties: status address may be optionally provided. aspeed,lpc-interrupts: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | @@ -63,12 +63,12 @@ properties: kcs_chan: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The LPC channel number in the controller kcs_addr: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The host CPU IO map address required: diff --git a/dts/Bindings/ipmi/ipmi-ipmb.yaml b/dts/Bindings/ipmi/ipmi-ipmb.yaml index 3f25cdb4e9..52647bff31 100644 --- a/dts/Bindings/ipmi/ipmi-ipmb.yaml +++ b/dts/Bindings/ipmi/ipmi-ipmb.yaml @@ -18,7 +18,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/dts/Bindings/ipmi/ipmi-smic.yaml b/dts/Bindings/ipmi/ipmi-smic.yaml index c1b4bf95ef..4bffa3d861 100644 --- a/dts/Bindings/ipmi/ipmi-smic.yaml +++ b/dts/Bindings/ipmi/ipmi-smic.yaml @@ -20,7 +20,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/dts/Bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/dts/Bindings/leds/backlight/mediatek,mt6370-backlight.yaml index 5533b6562d..16fc98e712 100644 --- a/dts/Bindings/leds/backlight/mediatek,mt6370-backlight.yaml +++ b/dts/Bindings/leds/backlight/mediatek,mt6370-backlight.yaml @@ -66,7 +66,7 @@ properties: mediatek,bled-ocp-shutdown: description: | - Enable the backlight shutdown when OCP level triggerred. + Enable the backlight shutdown when OCP level triggered. type: boolean mediatek,bled-ocp-microamp: diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml index 58b492d002..5fb7007f36 100644 --- a/dts/Bindings/leds/common.yaml +++ b/dts/Bindings/leds/common.yaml @@ -83,8 +83,7 @@ properties: - enum: # LED will act as a back-light, controlled by the framebuffer system - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + # LED will turn on (see also "default-state" property) - default-on # LED "double" flashes at a load average based rate - heartbeat @@ -158,6 +157,18 @@ properties: For flash LED controllers with configurable current this property is mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). + max-brightness: + description: + Normally, the maximum brightness is determined by the hardware, and this + property is not required. This property is used to set a software limit. + It could happen that an LED is made so bright that it gets damaged or + causes damage due to restrictions in a specific system, such as mounting + conditions. + Note that this flag is mainly used for PWM-LEDs, where it is not possible + to map brightness to current. Drivers for other controllers should use + led-max-microamp. + $ref: /schemas/types.yaml#definitions/uint32 + panic-indicator: description: This property specifies that the LED should be used, if at all possible, diff --git a/dts/Bindings/leds/leds-an30259a.txt b/dts/Bindings/leds/leds-an30259a.txt deleted file mode 100644 index cbd833906b..0000000000 --- a/dts/Bindings/leds/leds-an30259a.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Panasonic AN30259A 3-channel LED driver - -The AN30259A is a LED controller capable of driving three LEDs independently. It supports -constant current output and sloping current output modes. The chip is connected over I2C. - -Required properties: - - compatible: Must be "panasonic,an30259a". - - reg: I2C slave address. - - #address-cells: Must be 1. - - #size-cells: Must be 0. - -Each LED is represented as a sub-node of the panasonic,an30259a node. - -Required sub-node properties: - - reg: Pin that the LED is connected to. Must be 1, 2, or 3. - -Optional sub-node properties: - - function : - see Documentation/devicetree/bindings/leds/common.txt - - color : - see Documentation/devicetree/bindings/leds/common.txt - - label : - see Documentation/devicetree/bindings/leds/common.txt (deprecated) - - linux,default-trigger : - see Documentation/devicetree/bindings/leds/common.txt - -Example: - -#include <dt-bindings/leds/common.h> - -led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_RED>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_GREEN>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_BLUE>; - }; -}; diff --git a/dts/Bindings/leds/leds-aw2013.yaml b/dts/Bindings/leds/leds-aw2013.yaml index 08f3e1cfc1..26238446f2 100644 --- a/dts/Bindings/leds/leds-aw2013.yaml +++ b/dts/Bindings/leds/leds-aw2013.yaml @@ -20,9 +20,20 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + description: Open-drain, low active interrupt pin "INTN". + Used to report completion of operations (power up, LED breath effects). + vcc-supply: description: Regulator providing power to the "VCC" pin. + vio-supply: + description: Regulator providing power for pull-up of the I/O lines. + "VIO1" in the typical application circuit example of the datasheet. + Note that this regulator does not directly connect to AW2013, but is + needed for the correct operation of the interrupt and I2C lines. + "#address-cells": const: 1 @@ -52,6 +63,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> i2c { @@ -61,6 +73,7 @@ examples: led-controller@45 { compatible = "awinic,aw2013"; reg = <0x45>; + interrupts = <42 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/leds/leds-group-multicolor.yaml b/dts/Bindings/leds/leds-group-multicolor.yaml new file mode 100644 index 0000000000..8ed059a5a7 --- /dev/null +++ b/dts/Bindings/leds/leds-group-multicolor.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-group-multicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Multi-color LED built with monochromatic LEDs + +maintainers: + - Jean-Jacques Hiblot <jjhiblot@traphandler.com> + +description: | + This driver combines several monochromatic LEDs into one multi-color + LED using the multicolor LED class. + +properties: + compatible: + const: leds-group-multicolor + + leds: + description: + An aray of monochromatic leds + $ref: /schemas/types.yaml#/definitions/phandle-array + +required: + - leds + +allOf: + - $ref: leds-class-multicolor.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + monochromatic-leds { + compatible = "gpio-leds"; + + led0: led-0 { + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + }; + + led1: led-1 { + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led2: led-2 { + gpios = <&mcu_pio 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + leds = <&led0>, <&led1>, <&led2>; + }; + +... diff --git a/dts/Bindings/leds/leds-lp55xx.yaml b/dts/Bindings/leds/leds-lp55xx.yaml index 058be1fedb..e9d4514d01 100644 --- a/dts/Bindings/leds/leds-lp55xx.yaml +++ b/dts/Bindings/leds/leds-lp55xx.yaml @@ -106,7 +106,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: maximum: 8 @@ -129,7 +129,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: description: | diff --git a/dts/Bindings/leds/leds-qcom-lpg.yaml b/dts/Bindings/leds/leds-qcom-lpg.yaml index e6f1999cb2..ea84ad426d 100644 --- a/dts/Bindings/leds/leds-qcom-lpg.yaml +++ b/dts/Bindings/leds/leds-qcom-lpg.yaml @@ -56,7 +56,7 @@ properties: description: > A list of integer pairs, where each pair represent the dtest line the particular channel should be connected to and the flags denoting how the - value should be outputed, as defined in the datasheet. The number of + value should be outputted, as defined in the datasheet. The number of pairs should be the same as the number of channels. items: items: diff --git a/dts/Bindings/leds/nxp,pca953x.yaml b/dts/Bindings/leds/nxp,pca953x.yaml index edf6f55df6..9610bca57d 100644 --- a/dts/Bindings/leds/nxp,pca953x.yaml +++ b/dts/Bindings/leds/nxp,pca953x.yaml @@ -29,6 +29,10 @@ properties: gpio-controller: true + gpio-line-names: + minItems: 1 + maxItems: 16 + '#gpio-cells': const: 2 diff --git a/dts/Bindings/leds/nxp,pca995x.yaml b/dts/Bindings/leds/nxp,pca995x.yaml new file mode 100644 index 0000000000..654915c1f6 --- /dev/null +++ b/dts/Bindings/leds/nxp,pca995x.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/nxp,pca995x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA995x LED controllers + +maintainers: + - Isai Gaspar <isaiezequiel.gaspar@nxp.com> + - Marek Vasut <marex@denx.de> + +description: + The NXP PCA9952/PCA9955B are programmable LED controllers connected via I2C + that can drive 16 separate lines. Each of them can be individually switched + on and off, and brightness can be controlled via individual PWM. + + Datasheets are available at + https://www.nxp.com/docs/en/data-sheet/PCA9952_PCA9955.pdf + https://www.nxp.com/docs/en/data-sheet/PCA9955B.pdf + +properties: + compatible: + enum: + - nxp,pca9952 + - nxp,pca9955b + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-9a-f]+$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + required: + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@1 { + compatible = "nxp,pca9955b"; + reg = <0x01>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + }; + }; + }; + +... diff --git a/dts/Bindings/leds/panasonic,an30259a.yaml b/dts/Bindings/leds/panasonic,an30259a.yaml new file mode 100644 index 0000000000..e918dceea0 --- /dev/null +++ b/dts/Bindings/leds/panasonic,an30259a.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/panasonic,an30259a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Panasonic AN30259A 3-channel LED controller + +maintainers: + - Iskren Chernev <me@iskren.info> + +description: + The AN30259A is a LED controller capable of driving three LEDs independently. + It supports constant current output and sloping current output modes. The chip + is connected over I2C. + +properties: + compatible: + const: panasonic,an30259a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[1-3]$": + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + enum: [ 1, 2, 3 ] + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +... diff --git a/dts/Bindings/leds/rohm,bd2606mvv.yaml b/dts/Bindings/leds/rohm,bd2606mvv.yaml index 14700a2e5f..44dd91aa23 100644 --- a/dts/Bindings/leds/rohm,bd2606mvv.yaml +++ b/dts/Bindings/leds/rohm,bd2606mvv.yaml @@ -35,7 +35,7 @@ properties: description: GPIO pin to enable/disable the device. patternProperties: - "^led@[0-6]$": + "^led@[0-5]$": type: object $ref: common.yaml# unevaluatedProperties: false @@ -43,7 +43,7 @@ patternProperties: properties: reg: minimum: 0 - maximum: 6 + maximum: 5 required: - reg diff --git a/dts/Bindings/leds/rohm,bd71828-leds.yaml b/dts/Bindings/leds/rohm,bd71828-leds.yaml index 58f0d94c6d..b7a3ef76cb 100644 --- a/dts/Bindings/leds/rohm,bd71828-leds.yaml +++ b/dts/Bindings/leds/rohm,bd71828-leds.yaml @@ -18,8 +18,6 @@ description: | The device has two LED outputs referred as GRNLED and AMBLED in data-sheet. -select: false - properties: compatible: const: rohm,bd71828-leds diff --git a/dts/Bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/dts/Bindings/mailbox/brcm,iproc-flexrm-mbox.txt index 752ae6b00d..c80065a1eb 100644 --- a/dts/Bindings/mailbox/brcm,iproc-flexrm-mbox.txt +++ b/dts/Bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -29,7 +29,7 @@ Required properties: where N is the value specified by 2nd cell above. If FlexRM does not get required number of completion messages in time specified by this cell then it will inject one MSI interrupt - to CPU provided atleast one completion message is available. + to CPU provided at least one completion message is available. Optional properties: -------------------- diff --git a/dts/Bindings/mailbox/ti,omap-mailbox.yaml b/dts/Bindings/mailbox/ti,omap-mailbox.yaml index d433e496ec..1a2001e588 100644 --- a/dts/Bindings/mailbox/ti,omap-mailbox.yaml +++ b/dts/Bindings/mailbox/ti,omap-mailbox.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# @@ -159,7 +159,7 @@ properties: a corresponding sysc interconnect node. This property is only needed on some legacy OMAP SoCs which have not - yet been converted to the ti,sysc interconnect hierarachy, but is + yet been converted to the ti,sysc interconnect hierarchy, but is otherwise considered obsolete. patternProperties: diff --git a/dts/Bindings/media/amphion,vpu.yaml b/dts/Bindings/media/amphion,vpu.yaml index a9d80eaeee..c0d83d7552 100644 --- a/dts/Bindings/media/amphion,vpu.yaml +++ b/dts/Bindings/media/amphion,vpu.yaml @@ -47,7 +47,7 @@ patternProperties: $ref: ../mailbox/fsl,mu.yaml# - "^vpu_core@[0-9a-f]+$": + "^vpu-core@[0-9a-f]+$": description: Each core correspond a decoder or encoder, need to configure them separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC @@ -143,7 +143,7 @@ examples: power-domains = <&pd IMX_SC_R_VPU_MU_2>; }; - vpu_core0: vpu_core@2d080000 { + vpu_core0: vpu-core@2d080000 { compatible = "nxp,imx8q-vpu-decoder"; reg = <0x2d080000 0x10000>; power-domains = <&pd IMX_SC_R_VPU_DEC_0>; @@ -154,7 +154,7 @@ examples: memory-region = <&decoder_boot>, <&decoder_rpc>; }; - vpu_core1: vpu_core@2d090000 { + vpu_core1: vpu-core@2d090000 { compatible = "nxp,imx8q-vpu-encoder"; reg = <0x2d090000 0x10000>; power-domains = <&pd IMX_SC_R_VPU_ENC_0>; @@ -165,7 +165,7 @@ examples: memory-region = <&encoder1_boot>, <&encoder1_rpc>; }; - vpu_core2: vpu_core@2d0a0000 { + vpu_core2: vpu-core@2d0a0000 { reg = <0x2d0a0000 0x10000>; compatible = "nxp,imx8q-vpu-encoder"; power-domains = <&pd IMX_SC_R_VPU_ENC_1>; diff --git a/dts/Bindings/media/cdns,csi2rx.txt b/dts/Bindings/media/cdns,csi2rx.txt deleted file mode 100644 index 6b02a0657a..0000000000 --- a/dts/Bindings/media/cdns,csi2rx.txt +++ /dev/null @@ -1,100 +0,0 @@ -Cadence MIPI-CSI2 RX controller -=============================== - -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI -lanes in input, and 4 different pixel streams in output. - -Required properties: - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible - - reg: base address and size of the memory mapped region - - clocks: phandles to the clocks driving the controller - - clock-names: must contain: - * sys_clk: main clock - * p_clk: register bank clock - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream - implemented in hardware, between 0 and 3 - -Optional properties: - - phys: phandle to the external D-PHY, phy-names must be provided - - phy-names: must contain "dphy", if the implementation uses an - external D-PHY - -Required subnodes: - - ports: A ports node with one port child node per device input and output - port, in accordance with the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - port nodes are numbered as follows: - - Port Description - ----------------------------- - 0 CSI-2 input - 1 Stream 0 output - 2 Stream 1 output - 3 Stream 2 output - 4 Stream 3 output - - The stream output port nodes are optional if they are not - connected to anything at the hardware level or implemented - in the design.Since there is only one endpoint per port, - the endpoints are not numbered. - - -Example: - -csi2rx: csi-bridge@0d060000 { - compatible = "cdns,csi2rx"; - reg = <0x0d060000 0x1000>; - clocks = <&byteclock>, <&byteclock> - <&coreclock>, <&coreclock>, - <&coreclock>, <&coreclock>; - clock-names = "sys_clk", "p_clk", - "pixel_if0_clk", "pixel_if1_clk", - "pixel_if2_clk", "pixel_if3_clk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi2rx_in_sensor: endpoint { - remote-endpoint = <&sensor_out_csi2rx>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - - port@1 { - reg = <1>; - - csi2rx_out_grabber0: endpoint { - remote-endpoint = <&grabber0_in_csi2rx>; - }; - }; - - port@2 { - reg = <2>; - - csi2rx_out_grabber1: endpoint { - remote-endpoint = <&grabber1_in_csi2rx>; - }; - }; - - port@3 { - reg = <3>; - - csi2rx_out_grabber2: endpoint { - remote-endpoint = <&grabber2_in_csi2rx>; - }; - }; - - port@4 { - reg = <4>; - - csi2rx_out_grabber3: endpoint { - remote-endpoint = <&grabber3_in_csi2rx>; - }; - }; - }; -}; diff --git a/dts/Bindings/media/cdns,csi2rx.yaml b/dts/Bindings/media/cdns,csi2rx.yaml new file mode 100644 index 0000000000..30a335b107 --- /dev/null +++ b/dts/Bindings/media/cdns,csi2rx.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MIPI-CSI2 RX controller + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +description: + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI + lanes in input, and 4 different pixel streams in output. + +properties: + compatible: + items: + - enum: + - starfive,jh7110-csi2rx + - const: cdns,csi2rx + + reg: + maxItems: 1 + + clocks: + items: + - description: CSI2Rx system clock + - description: Gated Register bank clock for APB interface + - description: pixel Clock for Stream interface 0 + - description: pixel Clock for Stream interface 1 + - description: pixel Clock for Stream interface 2 + - description: pixel Clock for Stream interface 3 + + clock-names: + items: + - const: sys_clk + - const: p_clk + - const: pixel_if0_clk + - const: pixel_if1_clk + - const: pixel_if2_clk + - const: pixel_if3_clk + + resets: + items: + - description: CSI2Rx system reset + - description: Gated Register bank reset for APB interface + - description: pixel reset for Stream interface 0 + - description: pixel reset for Stream interface 1 + - description: pixel reset for Stream interface 2 + - description: pixel reset for Stream interface 3 + + reset-names: + items: + - const: sys + - const: reg_bank + - const: pixel_if0 + - const: pixel_if1 + - const: pixel_if2 + - const: pixel_if3 + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 + + clock-lanes: + const: 0 + + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 0 Output port node + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 1 Output port node + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 2 Output port node + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 3 Output port node + + required: + - port@0 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + csi@d060000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0d060000 0x1000>; + clocks = <&byteclock 7>, <&byteclock 6>, + <&coreclock 8>, <&coreclock 9>, + <&coreclock 10>, <&coreclock 11>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&bytereset 9>, <&bytereset 4>, + <&corereset 5>, <&corereset 6>, + <&corereset 7>, <&corereset 8>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2rx_in_sensor: endpoint { + remote-endpoint = <&sensor_out_csi2rx>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + csi2rx_out_grabber0: endpoint { + remote-endpoint = <&grabber0_in_csi2rx>; + }; + }; + + port@2 { + reg = <2>; + + csi2rx_out_grabber1: endpoint { + remote-endpoint = <&grabber1_in_csi2rx>; + }; + }; + + port@3 { + reg = <3>; + + csi2rx_out_grabber2: endpoint { + remote-endpoint = <&grabber2_in_csi2rx>; + }; + }; + + port@4 { + reg = <4>; + + csi2rx_out_grabber3: endpoint { + remote-endpoint = <&grabber3_in_csi2rx>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/media/cec/nvidia,tegra114-cec.yaml b/dts/Bindings/media/cec/nvidia,tegra114-cec.yaml index 369c48fd9b..a6b73498bc 100644 --- a/dts/Bindings/media/cec/nvidia,tegra114-cec.yaml +++ b/dts/Bindings/media/cec/nvidia,tegra114-cec.yaml @@ -53,6 +53,5 @@ examples: interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_CEC>; clock-names = "cec"; - status = "disabled"; hdmi-phandle = <&hdmi>; }; diff --git a/dts/Bindings/media/i2c/ov5695.txt b/dts/Bindings/media/i2c/ov5695.txt deleted file mode 100644 index 640a63717d..0000000000 --- a/dts/Bindings/media/i2c/ov5695.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Omnivision OV5695 MIPI CSI-2 sensor - -Required Properties: -- compatible: shall be "ovti,ov5695" -- clocks: reference to the xvclk input clock -- clock-names: shall be "xvclk" -- avdd-supply: Analog voltage supply, 2.8 volts -- dovdd-supply: Digital I/O voltage supply, 1.8 volts -- dvdd-supply: Digital core voltage supply, 1.2 volts -- reset-gpios: Low active reset gpio - -The device node shall contain one 'port' child node with an -'endpoint' subnode for its digital output video port, -in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. -The endpoint optional property 'data-lanes' shall be "<1 2>". - -Example: -&i2c7 { - ov5695: camera-sensor@36 { - compatible = "ovti,ov5695"; - reg = <0x36>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cru SCLK_TESTCLKOUT1>; - clock-names = "xvclk"; - - avdd-supply = <&pp2800_cam>; - dovdd-supply = <&pp1800>; - dvdd-supply = <&pp1250_cam>; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - - port { - wcam_out: endpoint { - remote-endpoint = <&mipi_in_wcam>; - data-lanes = <1 2>; - }; - }; - }; -}; diff --git a/dts/Bindings/media/i2c/ov7251.txt b/dts/Bindings/media/i2c/ov7251.txt deleted file mode 100644 index 8281151f74..0000000000 --- a/dts/Bindings/media/i2c/ov7251.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor - -The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor -with an active array size of 640H x 480V. It is programmable through a serial -I2C interface. - -Required Properties: -- compatible: Value should be "ovti,ov7251". -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds - to the hardware pin XSHUTDOWN which is physically active low. -- vdddo-supply: Chip digital IO regulator. -- vdda-supply: Chip analog regulator. -- vddd-supply: Chip digital core regulator. - -The device node shall contain one 'port' child node with a single 'endpoint' -subnode for its digital output video port, in accordance with the video -interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - &i2c1 { - ... - - ov7251: camera-sensor@60 { - compatible = "ovti,ov7251"; - reg = <0x60>; - - enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_bw_default>; - - clocks = <&clks 200>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - vdddo-supply = <&camera_dovdd_1v8>; - vdda-supply = <&camera_avdd_2v8>; - vddd-supply = <&camera_dvdd_1v2>; - - port { - ov7251_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0>; - remote-endpoint = <&csi0_ep>; - }; - }; - }; - }; diff --git a/dts/Bindings/media/i2c/ovti,ov5693.yaml b/dts/Bindings/media/i2c/ovti,ov5693.yaml index 359dc08440..6829a4aadd 100644 --- a/dts/Bindings/media/i2c/ovti,ov5693.yaml +++ b/dts/Bindings/media/i2c/ovti,ov5693.yaml @@ -5,26 +5,41 @@ $id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Omnivision OV5693 CMOS Sensor +title: Omnivision OV5693/OV5695 CMOS Sensors maintainers: - Tommaso Merciai <tommaso.merciai@amarulasolutions.com> description: | - The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS - image sensor that delivers 2592x1944 at 30fps. It provides full-frame, + The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS + image sensors that deliver 2592x1944 at 30fps. It provides full-frame, sub-sampled, and windowed 10-bit MIPI images in various formats via the Serial Camera Control Bus (SCCB) interface. - OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB). - The sensor output is available via CSI-2 serial data output (up to 2-lane). + OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus + (SCCB). The sensor output is available via CSI-2 serial data output (up to + 2-lane). allOf: - $ref: /schemas/media/video-interface-devices.yaml# + - if: + properties: + compatible: + contains: + const: ovti,ov5693 + then: + properties: + port: + properties: + endpoint: + required: + - link-frequencies properties: compatible: - const: ovti,ov5693 + enum: + - ovti,ov5693 + - ovti,ov5695 reg: maxItems: 1 @@ -34,6 +49,9 @@ properties: System input clock (aka XVCLK). From 6 to 27 MHz. maxItems: 1 + clock-names: + const: xvclk + dovdd-supply: description: Digital I/O voltage supply, 1.8V. @@ -72,7 +90,6 @@ properties: required: - data-lanes - - link-frequencies required: - compatible diff --git a/dts/Bindings/media/i2c/ovti,ov7251.yaml b/dts/Bindings/media/i2c/ovti,ov7251.yaml new file mode 100644 index 0000000000..2e5187acbb --- /dev/null +++ b/dts/Bindings/media/i2c/ovti,ov7251.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV7251 Image Sensor + +description: + The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor + with an active array size of 640H x 480V. It is programmable through a serial + I2C interface. + +maintainers: + - Todor Tomov <todor.too@gmail.com> + +properties: + compatible: + const: ovti,ov7251 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.2 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity + is GPIO_ACTIVE_HIGH. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maximum: 1 + + data-lanes: + maxItems: 1 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov7251"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov7251_vdddo_1v8>; + vdda-supply = <&ov7251_vdda_2v8>; + vddd-supply = <&ov7251_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + + port { + ov7251_ep: endpoint { + remote-endpoint = <&csi0_ep>; + clock-lanes = <1>; + data-lanes = <0>; + link-frequencies = /bits/ 64 <240000000 319200000>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/media/i2c/st,st-mipid02.yaml b/dts/Bindings/media/i2c/st,st-mipid02.yaml index 19a39d753a..b68141264c 100644 --- a/dts/Bindings/media/i2c/st,st-mipid02.yaml +++ b/dts/Bindings/media/i2c/st,st-mipid02.yaml @@ -143,7 +143,6 @@ examples: mipid02: csi2rx@14 { compatible = "st,st-mipid02"; reg = <0x14>; - status = "okay"; clocks = <&clk_ext_camera_12>; clock-names = "xclk"; VDDE-supply = <&vdd>; diff --git a/dts/Bindings/media/i2c/ti,ds90ub913.yaml b/dts/Bindings/media/i2c/ti,ds90ub913.yaml new file mode 100644 index 0000000000..f6612bb0f6 --- /dev/null +++ b/dts/Bindings/media/i2c/ti,ds90ub913.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB913 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB913 is an FPD-Link III video serializer for parallel video. + +properties: + compatible: + enum: + - ti,ds90ub913a-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPO pin number, second cell is the flags. The GPO pin + number must be in range of [0, 3]. Note that GPOs 2 and 3 are not + available in external oscillator mode. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Parallel input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - pclk-sample + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_in: endpoint { + remote-endpoint = <&sensor_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&fixed_clock>; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub913_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/media/i2c/ti,ds90ub953.yaml b/dts/Bindings/media/i2c/ti,ds90ub953.yaml new file mode 100644 index 0000000000..2030366994 --- /dev/null +++ b/dts/Bindings/media/i2c/ti,ds90ub953.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB953 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2. + +properties: + compatible: + enum: + - ti,ds90ub953-q1 + - ti,ds90ub971-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPIO pin number, second cell is the flags. The GPIO pin + number must be in range of [0, 3]. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + + clocks = <&serializer>; + clock-names = "inck"; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub953_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/media/i2c/ti,ds90ub960.yaml b/dts/Bindings/media/i2c/ti,ds90ub960.yaml new file mode 100644 index 0000000000..289737721c --- /dev/null +++ b/dts/Bindings/media/i2c/ti,ds90ub960.yaml @@ -0,0 +1,427 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO + forwarding. + +allOf: + - $ref: /schemas/i2c/i2c-atr.yaml# + +properties: + compatible: + enum: + - ti,ds90ub960-q1 + - ti,ds90ub9702-q1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Reference clock connected to the REFCLK pin. + + clock-names: + items: + - const: refclk + + powerdown-gpios: + maxItems: 1 + description: + Specifier for the GPIO connected to the PDB pin. + + i2c-alias-pool: + minItems: 1 + maxItems: 32 + + links: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ti,manual-strobe: + type: boolean + description: + Enable manual strobe position and EQ level + + patternProperties: + '^link@[0-3]$': + type: object + additionalProperties: false + properties: + reg: + description: The link number + maxItems: 1 + + i2c-alias: + description: + The I2C address used for the serializer. Transactions to this + address on the I2C bus where the deserializer resides are + forwarded to the serializer. + + ti,rx-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # RAW10 + - 1 # RAW12 HF + - 2 # RAW12 LF + - 3 # CSI2 SYNC + - 4 # CSI2 NON-SYNC + description: + FPD-Link Input Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,cdr-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # FPD-Link III + - 1 # FPD-Link IV + description: + FPD-Link CDR Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,strobe-pos: + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -13 + maximum: 13 + description: Manual strobe position + + ti,eq-level: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 14 + description: Manual EQ level + + serializer: + type: object + description: FPD-Link Serializer node + + required: + - reg + - i2c-alias + - ti,rx-mode + - serializer + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 2 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 3 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + deser@3d { + compatible = "ti,ds90ub960-q1"; + reg = <0x3d>; + + clock-names = "refclk"; + clocks = <&fixed_clock>; + + powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>; + + i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Port 0, Camera 0 */ + port@0 { + reg = <0>; + + ub960_fpd3_1_in: endpoint { + remote-endpoint = <&ub953_1_out>; + }; + }; + + /* Port 1, Camera 1 */ + port@1 { + reg = <1>; + + ub960_fpd3_2_in: endpoint { + remote-endpoint = <&ub913_2_out>; + hsync-active = <0>; + vsync-active = <1>; + }; + }; + + /* Port 2, unconnected */ + port@2 { + reg = <2>; + }; + + /* Port 3, unconnected */ + port@3 { + reg = <3>; + }; + + /* Port 4, CSI-2 TX */ + port@4 { + reg = <4>; + ds90ub960_0_csi_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <800000000>; + remote-endpoint = <&csi2_phy0>; + }; + }; + + /* Port 5, unconnected */ + port@5 { + reg = <5>; + }; + }; + + links { + #address-cells = <1>; + #size-cells = <0>; + + /* Link 0 has DS90UB953 serializer and IMX274 sensor */ + + link@0 { + reg = <0>; + i2c-alias = <0x44>; + + ti,rx-mode = <3>; + + serializer1: serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_1_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_1_out>; + }; + }; + + port@1 { + reg = <1>; + + ub953_1_out: endpoint { + remote-endpoint = <&ub960_fpd3_1_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>; + + port { + sensor_1_out: endpoint { + remote-endpoint = <&ub953_1_in>; + }; + }; + }; + }; + }; + }; /* End of link@0 */ + + /* Link 1 has DS90UB913 serializer and MT9V111 sensor */ + + link@1 { + reg = <1>; + i2c-alias = <0x45>; + + ti,rx-mode = <0>; + + serializer2: serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_2_in: endpoint { + remote-endpoint = <&sensor_2_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + ub913_2_out: endpoint { + remote-endpoint = <&ub960_fpd3_2_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&serializer2>; + + port { + sensor_2_out: endpoint { + remote-endpoint = <&ub913_2_in>; + }; + }; + }; + }; + }; + }; /* End of link@1 */ + }; + }; + }; +... diff --git a/dts/Bindings/media/i2c/toshiba,tc358746.yaml b/dts/Bindings/media/i2c/toshiba,tc358746.yaml index b8ba85a241..c5cab549ee 100644 --- a/dts/Bindings/media/i2c/toshiba,tc358746.yaml +++ b/dts/Bindings/media/i2c/toshiba,tc358746.yaml @@ -12,7 +12,7 @@ maintainers: description: |- The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 stream. The direction can be either parallel-in -> csi-out or csi-in -> - parallel-out The chip is programmable trough I2C and SPI but the SPI + parallel-out The chip is programmable through I2C and SPI but the SPI interface is only supported in parallel-in -> csi-out mode. Note that the current device tree bindings only support the diff --git a/dts/Bindings/media/i2c/tvp5150.txt b/dts/Bindings/media/i2c/tvp5150.txt index 719b2995dc..94b908ace5 100644 --- a/dts/Bindings/media/i2c/tvp5150.txt +++ b/dts/Bindings/media/i2c/tvp5150.txt @@ -53,7 +53,7 @@ Optional Connector Properties: ============================== - sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechnism. Please look at + instead of using the autodetection mechanism. Please look at [1] for more information. [1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. diff --git a/dts/Bindings/media/mediatek,vcodec-decoder.yaml b/dts/Bindings/media/mediatek,vcodec-decoder.yaml index fad59b486d..b401c67e3b 100644 --- a/dts/Bindings/media/mediatek,vcodec-decoder.yaml +++ b/dts/Bindings/media/mediatek,vcodec-decoder.yaml @@ -21,24 +21,33 @@ properties: - mediatek,mt8183-vcodec-dec reg: - maxItems: 12 + minItems: 11 + maxItems: 11 + + reg-names: + items: + - const: misc + - const: ld + - const: top + - const: cm + - const: ad + - const: av + - const: pp + - const: hwd + - const: hwq + - const: hwb + - const: hwg interrupts: maxItems: 1 clocks: + minItems: 1 maxItems: 8 clock-names: - items: - - const: vcodecpll - - const: univpll_d2 - - const: clk_cci400_sel - - const: vdec_sel - - const: vdecpll - - const: vencpll - - const: venc_lt_sel - - const: vdec_bus_clk_src + minItems: 1 + maxItems: 8 assigned-clocks: true @@ -66,6 +75,10 @@ properties: description: Describes point to scp. + mediatek,vdecsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the vdecsys syscon node. + required: - compatible - reg @@ -73,8 +86,7 @@ required: - clocks - clock-names - iommus - - assigned-clocks - - assigned-clock-parents + - mediatek,vdecsys allOf: - if: @@ -88,6 +100,15 @@ allOf: required: - mediatek,scp + properties: + clocks: + minItems: 1 + maxItems: 1 + + clock-names: + items: + - const: vdec + - if: properties: compatible: @@ -99,6 +120,22 @@ allOf: required: - mediatek,vpu + properties: + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: vcodecpll + - const: univpll_d2 + - const: clk_cci400_sel + - const: vdec_sel + - const: vdecpll + - const: vencpll + - const: venc_lt_sel + - const: vdec_bus_clk_src + additionalProperties: false examples: @@ -109,10 +146,9 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/mt8173-power.h> - vcodec_dec: vcodec@16000000 { + vcodec_dec: vcodec@16020000 { compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0x16000000 0x100>, /*VDEC_SYS*/ - <0x16020000 0x1000>, /*VDEC_MISC*/ + reg = <0x16020000 0x1000>, /*VDEC_MISC*/ <0x16021000 0x800>, /*VDEC_LD*/ <0x16021800 0x800>, /*VDEC_TOP*/ <0x16022000 0x1000>, /*VDEC_CM*/ @@ -133,6 +169,7 @@ examples: <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; mediatek,vpu = <&vpu>; + mediatek,vdecsys = <&vdecsys>; power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, <&topckgen CLK_TOP_UNIVPLL_D2>, diff --git a/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml index dca9b0c5e1..a500a585c6 100644 --- a/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/dts/Bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -36,7 +36,7 @@ description: | controls the information of each hardware independent which include clk/power/irq. There are two workqueues in parent device: lat workqueue and core workqueue. They are used - to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer, + to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer, then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, writing the result to output buffer, disable hardware when core decode done. These two diff --git a/dts/Bindings/media/nxp,imx8-isi.yaml b/dts/Bindings/media/nxp,imx8-isi.yaml index 6038b9b5ab..e4665469a8 100644 --- a/dts/Bindings/media/nxp,imx8-isi.yaml +++ b/dts/Bindings/media/nxp,imx8-isi.yaml @@ -21,6 +21,7 @@ properties: enum: - fsl,imx8mn-isi - fsl,imx8mp-isi + - fsl,imx93-isi reg: maxItems: 1 @@ -72,7 +73,9 @@ allOf: properties: compatible: contains: - const: fsl,imx8mn-isi + enum: + - fsl,imx8mn-isi + - fsl,imx93-isi then: properties: interrupts: diff --git a/dts/Bindings/media/qcom,msm8916-venus.yaml b/dts/Bindings/media/qcom,msm8916-venus.yaml index 2350bf4b37..9410f13ca9 100644 --- a/dts/Bindings/media/qcom,msm8916-venus.yaml +++ b/dts/Bindings/media/qcom,msm8916-venus.yaml @@ -40,7 +40,7 @@ properties: properties: compatible: - const: "venus-decoder" + const: venus-decoder required: - compatible @@ -52,7 +52,7 @@ properties: properties: compatible: - const: "venus-encoder" + const: venus-encoder required: - compatible diff --git a/dts/Bindings/media/qcom,sm8250-venus.yaml b/dts/Bindings/media/qcom,sm8250-venus.yaml index 7915dcd2d9..f66033ae8b 100644 --- a/dts/Bindings/media/qcom,sm8250-venus.yaml +++ b/dts/Bindings/media/qcom,sm8250-venus.yaml @@ -106,7 +106,7 @@ examples: #include <dt-bindings/clock/qcom,videocc-sm8250.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> venus: video-codec@aa00000 { compatible = "qcom,sm8250-venus"; @@ -114,7 +114,7 @@ examples: interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc MVS0C_GDSC>, <&videocc MVS0_GDSC>, - <&rpmhpd SM8250_MX>; + <&rpmhpd RPMHPD_MX>; power-domain-names = "venus", "vcodec0", "mx"; clocks = <&gcc GCC_VIDEO_AXI0_CLK>, diff --git a/dts/Bindings/media/rockchip-isp1.yaml b/dts/Bindings/media/rockchip-isp1.yaml index 0bad7e6401..e466dff828 100644 --- a/dts/Bindings/media/rockchip-isp1.yaml +++ b/dts/Bindings/media/rockchip-isp1.yaml @@ -199,6 +199,7 @@ examples: wcam: camera@36 { compatible = "ovti,ov5695"; reg = <0x36>; + clocks = <&cru SCLK_TESTCLKOUT1>; port { wcam_out: endpoint { diff --git a/dts/Bindings/memory-controllers/ingenic,nemc.yaml b/dts/Bindings/memory-controllers/ingenic,nemc.yaml index a02724221f..b40cec0eb6 100644 --- a/dts/Bindings/memory-controllers/ingenic,nemc.yaml +++ b/dts/Bindings/memory-controllers/ingenic,nemc.yaml @@ -39,6 +39,7 @@ properties: patternProperties: ".*@[0-9]+$": type: object + $ref: mc-peripheral-props.yaml# required: - compatible diff --git a/dts/Bindings/memory-controllers/mc-peripheral-props.yaml b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml index 5acfcad12b..8d9dae15ad 100644 --- a/dts/Bindings/memory-controllers/mc-peripheral-props.yaml +++ b/dts/Bindings/memory-controllers/mc-peripheral-props.yaml @@ -34,6 +34,8 @@ required: # The controller specific properties go here. allOf: - $ref: st,stm32-fmc2-ebi-props.yaml# + - $ref: ingenic,nemc-peripherals.yaml# - $ref: intel,ixp4xx-expansion-peripheral-props.yaml# + - $ref: ti,gpmc-child.yaml# additionalProperties: true diff --git a/dts/Bindings/memory-controllers/mediatek,smi-larb.yaml b/dts/Bindings/memory-controllers/mediatek,smi-larb.yaml index aee7f6cf13..2381660b32 100644 --- a/dts/Bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/dts/Bindings/memory-controllers/mediatek,smi-larb.yaml @@ -67,7 +67,7 @@ properties: minimum: 0 maximum: 31 description: the hardware id of this larb. It's only required when this - hardward id is not consecutive from its M4U point of view. + hardware id is not consecutive from its M4U point of view. required: - compatible diff --git a/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml index fb4920397d..4e4af3cfc0 100644 --- a/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml +++ b/dts/Bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -152,7 +152,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: When the DRAM type is DDR3, this parameter defines the phy side CA line - (incluing command line, address line and clock line) drive strength. + (including command line, address line and clock line) drive strength. default: 40 rockchip,phy_ddr3_dq_drv: @@ -305,7 +305,7 @@ properties: description: Defines the self-refresh power down idle period in which memories are placed into self-refresh power down mode if bus is idle for - srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only. + srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only. rockchip,standby-idle-ns: description: diff --git a/dts/Bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/dts/Bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml index 75143db514..b74ad9a330 100644 --- a/dts/Bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +++ b/dts/Bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml @@ -12,7 +12,7 @@ maintainers: description: The Zynq DDR ECC controller has an optional ECC support in half-bus width - (16-bit) configuration. It is cappable of correcting single bit ECC errors + (16-bit) configuration. It is capable of correcting single bit ECC errors and detecting double bit ECC errors. properties: diff --git a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml index cf94176fe1..8789e3639f 100644 --- a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -34,6 +34,9 @@ patternProperties: - allwinner,sun6i-a31-clock-reset - fixed-factor-clock + required: + - compatible + allOf: - if: properties: @@ -55,25 +58,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 2 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -85,25 +80,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -119,9 +106,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -129,16 +113,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -150,9 +129,6 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 4 description: > @@ -162,16 +138,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -183,16 +154,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml index 16c80a7eec..e51f855199 100644 --- a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -57,25 +57,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -91,9 +83,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -101,16 +90,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -122,34 +106,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false - - - if: - properties: - compatible: - contains: - const: allwinner,sun8i-a23-codec-analog - - then: - properties: - # Already checked in the main schema - compatible: true - - phandle: true - - required: - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/aspeed-lpc.yaml b/dts/Bindings/mfd/aspeed-lpc.yaml index 750996d9a1..5dfe77aca1 100644 --- a/dts/Bindings/mfd/aspeed-lpc.yaml +++ b/dts/Bindings/mfd/aspeed-lpc.yaml @@ -27,7 +27,7 @@ description: as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management and bus snoop configuration. - * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom hardware management protocols for handover between the host and baseboard management controller. diff --git a/dts/Bindings/mfd/atmel-flexcom.txt b/dts/Bindings/mfd/atmel-flexcom.txt index 9d83753563..af692e8833 100644 --- a/dts/Bindings/mfd/atmel-flexcom.txt +++ b/dts/Bindings/mfd/atmel-flexcom.txt @@ -6,6 +6,7 @@ at boot time according to the device tree. Required properties: - compatible: Should be "atmel,sama5d2-flexcom" + or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" - reg: Should be the offset/length value for Flexcom dedicated I/O registers (without USART, TWI or SPI registers). - clocks: Should be the Flexcom peripheral clock from PMC. diff --git a/dts/Bindings/mfd/atmel-gpbr.txt b/dts/Bindings/mfd/atmel-gpbr.txt index e8c525569f..3c989d1760 100644 --- a/dts/Bindings/mfd/atmel-gpbr.txt +++ b/dts/Bindings/mfd/atmel-gpbr.txt @@ -6,6 +6,7 @@ Required properties: - compatible: Should be one of the following: "atmel,at91sam9260-gpbr", "syscon" "microchip,sam9x60-gpbr", "syscon" + "microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon" - reg: contains offset/length value of the GPBR memory region. diff --git a/dts/Bindings/mfd/atmel-hlcdc.txt b/dts/Bindings/mfd/atmel-hlcdc.txt index 5f8880cc75..7de696eefa 100644 --- a/dts/Bindings/mfd/atmel-hlcdc.txt +++ b/dts/Bindings/mfd/atmel-hlcdc.txt @@ -8,6 +8,7 @@ Required properties: "atmel,sama5d3-hlcdc" "atmel,sama5d4-hlcdc" "microchip,sam9x60-hlcdc" + "microchip,sam9x75-xlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". diff --git a/dts/Bindings/mfd/atmel-matrix.txt b/dts/Bindings/mfd/atmel-matrix.txt index 89d05c64fb..6e5f83614e 100644 --- a/dts/Bindings/mfd/atmel-matrix.txt +++ b/dts/Bindings/mfd/atmel-matrix.txt @@ -14,6 +14,7 @@ Required properties: "atmel,at91sam9x5-matrix", "syscon" "atmel,sama5d3-matrix", "syscon" "microchip,sam9x60-matrix", "syscon" + "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon" - reg: Contains offset/length value of the Bus Matrix memory region. diff --git a/dts/Bindings/mfd/atmel-smc.txt b/dts/Bindings/mfd/atmel-smc.txt index 5696d9fcb5..fd62add38a 100644 --- a/dts/Bindings/mfd/atmel-smc.txt +++ b/dts/Bindings/mfd/atmel-smc.txt @@ -10,6 +10,7 @@ Required properties: "atmel,sama5d3-smc", "syscon" "atmel,sama5d2-smc", "syscon" "microchip,sam9x60-smc", "syscon" + "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index 9f9a14af87..cb480162f9 100644 --- a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index 803277dd27..c14def1b2a 100644 --- a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index b9a6856ce9..5f48209ed4 100644 --- a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index 4651fe4dde..f1f4629565 100644 --- a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index 0330b621fd..4d594739b3 100644 --- a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index 82d3e4415b..aae83d4328 100644 --- a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -35,7 +35,7 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm63xx-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in @@ -44,7 +44,7 @@ patternProperties: "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/maxim,max77693.yaml b/dts/Bindings/mfd/maxim,max77693.yaml index 1b06a77ec7..9804d13de6 100644 --- a/dts/Bindings/mfd/maxim,max77693.yaml +++ b/dts/Bindings/mfd/maxim,max77693.yaml @@ -31,12 +31,17 @@ properties: charger: $ref: /schemas/power/supply/maxim,max77693.yaml + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + led: $ref: /schemas/leds/maxim,max77693.yaml max77693-muic: type: object additionalProperties: false + deprecated: true properties: compatible: @@ -45,6 +50,21 @@ properties: required: - compatible + muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + required: + - compatible + motor-driver: type: object additionalProperties: false @@ -107,6 +127,38 @@ examples: }; }; + muic { + compatible = "maxim,max77693-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + + port@3 { + reg = <3>; + + muic_to_mhl: endpoint { + remote-endpoint = <&mhl_to_muic>; + }; + }; + }; + }; + }; + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; diff --git a/dts/Bindings/mfd/qcom,pm8008.yaml b/dts/Bindings/mfd/qcom,pm8008.yaml index e6a2387d86..9e4eed34da 100644 --- a/dts/Bindings/mfd/qcom,pm8008.yaml +++ b/dts/Bindings/mfd/qcom,pm8008.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8008 PMIC maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/Bindings/mfd/qcom,spmi-pmic.yaml index 8b9a2008a3..9f03436b1c 100644 --- a/dts/Bindings/mfd/qcom,spmi-pmic.yaml +++ b/dts/Bindings/mfd/qcom,spmi-pmic.yaml @@ -41,6 +41,7 @@ properties: - qcom,pm660 - qcom,pm660l - qcom,pm7250b + - qcom,pm7550ba - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 @@ -70,6 +71,8 @@ properties: - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 + - qcom,pmc8180 + - qcom,pmc8180c - qcom,pmd9635 - qcom,pmi632 - qcom,pmi8950 @@ -88,6 +91,7 @@ properties: - qcom,pms405 - qcom,pmx55 - qcom,pmx65 + - qcom,pmx75 - qcom,smb2351 - const: qcom,spmi-pmic @@ -127,7 +131,7 @@ patternProperties: "^audio-codec@[0-9a-f]+$": type: object - additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet + $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# "^charger@[0-9a-f]+$": type: object diff --git a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml index 7ab7b2c7f3..d783cc4e4e 100644 --- a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml @@ -130,7 +130,6 @@ dependencies: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/leds/common.h> i2c { #address-cells = <1>; diff --git a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml index 10f207a381..b7b323b1a4 100644 --- a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml @@ -34,7 +34,7 @@ properties: BD9576 and BD9573 VOUT1 regulator enable state can be individually controlled by a GPIO. This is dictated by state of vout1-en pin during the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 - enable sate is controlled via this pin. Set this property if vout1-en + enable state is controlled via this pin. Set this property if vout1-en is wired to be down at PMIC start-up. type: boolean @@ -61,7 +61,7 @@ properties: rohm,hw-timeout-ms: maxItems: 2 description: - Watchog timeout in milliseconds. If single value is given it is + Watchdog timeout in milliseconds. If single value is given it is the maximum timeout. Eg. if pinging watchdog is not done within this time limit the watchdog will be triggered. If two values are given watchdog is configured in "window mode". Then first value is limit for short-ping diff --git a/dts/Bindings/mfd/st,stmpe.yaml b/dts/Bindings/mfd/st,stmpe.yaml new file mode 100644 index 0000000000..b77cc3f307 --- /dev/null +++ b/dts/Bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/mfd/st,stpmic1.yaml b/dts/Bindings/mfd/st,stpmic1.yaml index 97c61097f9..b17ebeb0a4 100644 --- a/dts/Bindings/mfd/st,stpmic1.yaml +++ b/dts/Bindings/mfd/st,stpmic1.yaml @@ -106,6 +106,7 @@ properties: const: st,stpmic1-regulators ldo3: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -128,6 +129,7 @@ properties: additionalProperties: false ldo4: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -142,11 +144,14 @@ properties: regulator-name: true regulator-boot-on: true regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true regulator-over-current-protection: true additionalProperties: false vref_ddr: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -165,6 +170,7 @@ properties: additionalProperties: false boost: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -187,10 +193,8 @@ properties: "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies - "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - $ref: ../regulator/regulator.yaml - "^ldo[1-2,5-6]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -213,6 +217,7 @@ properties: additionalProperties: false "^buck[1-4]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -237,6 +242,7 @@ properties: additionalProperties: false "^pwr_sw[1-2]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: diff --git a/dts/Bindings/mfd/stericsson,ab8500.yaml b/dts/Bindings/mfd/stericsson,ab8500.yaml index 6c8d42f27f..94f9767a92 100644 --- a/dts/Bindings/mfd/stericsson,ab8500.yaml +++ b/dts/Bindings/mfd/stericsson,ab8500.yaml @@ -313,7 +313,7 @@ properties: - const: audioclk stericsson,earpeice-cmv: - description: Earpeice voltage + description: Earpiece voltage $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 950, 1100, 1270, 1580 ] @@ -337,39 +337,39 @@ properties: with power. ab8500_ldo_aux1: - description: The voltage for the auxilary LDO regulator 1 + description: The voltage for the auxiliary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux2: - description: The voltage for the auxilary LDO regulator 2 + description: The voltage for the auxiliary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux3: - description: The voltage for the auxilary LDO regulator 3 + description: The voltage for the auxiliary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux4: - description: The voltage for the auxilary LDO regulator 4 + description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux5: - description: The voltage for the auxilary LDO regulator 5 + description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux6: - description: The voltage for the auxilary LDO regulator 6 + description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# @@ -378,7 +378,7 @@ properties: # There is never any AUX7 regulator which is confusing ab8500_ldo_aux8: - description: The voltage for the auxilary LDO regulator 8 + description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# diff --git a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml index 1d4d88f7e8..5e0002f099 100644 --- a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml @@ -72,44 +72,52 @@ properties: main voltage domain for the chip. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_varm: description: The voltage for the ARM Cortex A-9 CPU. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vmodem: description: The voltage for the modem subsystem. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vpll: description: The voltage for the phase locked loop clocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps1: description: Also known as VIO12, is a step-down voltage regulator for 1.2V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps2: description: Also known as VIO18, is a step-down voltage regulator for 1.8V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps3: description: This is a step-down voltage regulator for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vrf1: - description: RF transciever voltage regulator. + description: RF transceiver voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) @@ -117,18 +125,21 @@ properties: for video encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp_ret: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_pipe: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) @@ -136,18 +147,21 @@ properties: for image encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp_ret: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_pipe: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sga: description: Smart Graphics Accelerator (SGA) voltage regulator. @@ -155,6 +169,7 @@ properties: accelerator block. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_b2r2_mcde: description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel @@ -162,28 +177,33 @@ properties: blocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12_ret: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34_ret: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a4171..0000000000 --- a/dts/Bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - }; diff --git a/dts/Bindings/mips/loongson/ls2k-reset.yaml b/dts/Bindings/mips/loongson/ls2k-reset.yaml index 20b5836efd..358ac8cd4d 100644 --- a/dts/Bindings/mips/loongson/ls2k-reset.yaml +++ b/dts/Bindings/mips/loongson/ls2k-reset.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson 2K1000 PM Controller diff --git a/dts/Bindings/mips/loongson/rs780e-acpi.yaml b/dts/Bindings/mips/loongson/rs780e-acpi.yaml index 7c0f902220..3e3a3705e8 100644 --- a/dts/Bindings/mips/loongson/rs780e-acpi.yaml +++ b/dts/Bindings/mips/loongson/rs780e-acpi.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson RS780E PCH ACPI Controller diff --git a/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 38ab049910..36a9dbdf3f 100644 --- a/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx AHB Queue Manager diff --git a/dts/Bindings/mmc/arasan,sdhci.yaml b/dts/Bindings/mmc/arasan,sdhci.yaml index a6c19a6cc9..3e99801f77 100644 --- a/dts/Bindings/mmc/arasan,sdhci.yaml +++ b/dts/Bindings/mmc/arasan,sdhci.yaml @@ -160,6 +160,12 @@ properties: description: The MIO bank number in which the command and data lines are configured. + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + dependencies: '#clock-cells': [ clock-output-names ] diff --git a/dts/Bindings/mmc/marvell,xenon-sdhci.yaml b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml index 3ee7588865..3a8e74894a 100644 --- a/dts/Bindings/mmc/marvell,xenon-sdhci.yaml +++ b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml @@ -71,8 +71,8 @@ properties: marvell,xenon-phy-type: $ref: /schemas/types.yaml#/definitions/string enum: - - "emmc 5.1 phy" - - "emmc 5.0 phy" + - emmc 5.1 phy + - emmc 5.0 phy description: | Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml index 86c73fd825..58ae298cd2 100644 --- a/dts/Bindings/mmc/mmc-controller.yaml +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -269,7 +269,7 @@ properties: post-power-on-delay-ms: description: It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. diff --git a/dts/Bindings/mmc/mtk-sd.yaml b/dts/Bindings/mmc/mtk-sd.yaml index 46eefdd19a..3fffa467e4 100644 --- a/dts/Bindings/mmc/mtk-sd.yaml +++ b/dts/Bindings/mmc/mtk-sd.yaml @@ -91,16 +91,6 @@ properties: should switch dat1 pin to GPIO mode. maxItems: 1 - assigned-clocks: - description: - PLL of the source clock. - maxItems: 1 - - assigned-clock-parents: - description: - parent of source clock, used for HS400 mode to get 400Mhz source clock. - maxItems: 1 - hs400-ds-delay: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/dts/Bindings/mmc/pxa-mmc.txt b/dts/Bindings/mmc/pxa-mmc.txt index 5f5c2bec2b..66a78eae4d 100644 --- a/dts/Bindings/mmc/pxa-mmc.txt +++ b/dts/Bindings/mmc/pxa-mmc.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. -In addition to the properties described in this docuent, the details +In addition to the properties described in this document, the details described in mmc.txt are supported. Examples: diff --git a/dts/Bindings/mmc/sdhci-atmel.txt b/dts/Bindings/mmc/sdhci-atmel.txt index 69edfd4d39..a9fb0a9124 100644 --- a/dts/Bindings/mmc/sdhci-atmel.txt +++ b/dts/Bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,13 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci" + or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. - clock-names: Must be "hclock", "multclk", "baseclk" for "atmel,sama5d2-sdhci". Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x7-sdhci". Optional properties: - assigned-clocks: The same with "multclk". diff --git a/dts/Bindings/mmc/sdhci-msm.yaml b/dts/Bindings/mmc/sdhci-msm.yaml index 6da28e6305..80141eb7fc 100644 --- a/dts/Bindings/mmc/sdhci-msm.yaml +++ b/dts/Bindings/mmc/sdhci-msm.yaml @@ -215,7 +215,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; @@ -232,7 +232,7 @@ examples: iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd SM8250_CX>; + power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&sdhc2_opp_table>; diff --git a/dts/Bindings/mmc/ti-omap-hsmmc.txt b/dts/Bindings/mmc/ti-omap-hsmmc.txt index 57d077c0b7..7a0e9dcdc4 100644 --- a/dts/Bindings/mmc/ti-omap-hsmmc.txt +++ b/dts/Bindings/mmc/ti-omap-hsmmc.txt @@ -95,7 +95,7 @@ while in suspend. | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | ------ ------- ----- -In suspend the fclk is off and the module is disfunctional. Even register reads +In suspend the fclk is off and the module is dysfunctional. Even register reads will fail. A small logic in the host will request fclk restore, when an external event is detected. Once the clock is restored, the host detects the event normally. Since am33xx doesn't have this line it never wakes from diff --git a/dts/Bindings/mtd/amlogic,meson-nand.yaml b/dts/Bindings/mtd/amlogic,meson-nand.yaml index 787ef488dd..57b6957c84 100644 --- a/dts/Bindings/mtd/amlogic,meson-nand.yaml +++ b/dts/Bindings/mtd/amlogic,meson-nand.yaml @@ -50,7 +50,7 @@ patternProperties: const: hw nand-ecc-step-size: - const: 1024 + enum: [512, 1024] nand-ecc-strength: enum: [8, 16, 24, 30, 40, 50, 60] @@ -66,6 +66,10 @@ patternProperties: unevaluatedProperties: false + dependencies: + nand-ecc-strength: [nand-ecc-step-size] + nand-ecc-step-size: [nand-ecc-strength] + required: - compatible diff --git a/dts/Bindings/mtd/jedec,spi-nor.yaml b/dts/Bindings/mtd/jedec,spi-nor.yaml index 89959e5c47..58f0cea160 100644 --- a/dts/Bindings/mtd/jedec,spi-nor.yaml +++ b/dts/Bindings/mtd/jedec,spi-nor.yaml @@ -43,8 +43,10 @@ properties: - const: jedec,spi-nor - const: jedec,spi-nor description: - Must also include "jedec,spi-nor" for any SPI NOR flash that can be - identified by the JEDEC READ ID opcode (0x9F). + SPI NOR flashes compatible with the JEDEC SFDP standard or which may be + identified with the READ ID opcode (0x9F) do not deserve a specific + compatible. They should instead only be matched against the generic + "jedec,spi-nor" compatible. reg: minItems: 1 @@ -70,6 +72,21 @@ properties: be used on such systems, to denote the absence of a reliable reset mechanism. + no-wp: + type: boolean + description: + The status register write disable (SRWD) bit in status register, combined + with the WP# signal, provides hardware data protection for the device. When + the SRWD bit is set to 1, and the WP# signal is either driven LOW or hard + strapped to LOW, the status register nonvolatile bits become read-only and + the WRITE STATUS REGISTER operation will not execute. The only way to exit + this hardware-protected mode is to drive WP# HIGH. If the WP# signal of the + flash device is not connected or is wrongly tied to GND (that includes internal + pull-downs) then status register permanently becomes read-only as the SRWD bit + cannot be reset. This boolean flag can be used on such systems to avoid setting + the SRWD bit while writing the status register. WP# signal hard strapped to GND + can be a valid use case. + reset-gpios: description: A GPIO line connected to the RESET (active low) signal of the device. diff --git a/dts/Bindings/mtd/marvell,nand-controller.yaml b/dts/Bindings/mtd/marvell,nand-controller.yaml index a10729bb18..1ecea848e8 100644 --- a/dts/Bindings/mtd/marvell,nand-controller.yaml +++ b/dts/Bindings/mtd/marvell,nand-controller.yaml @@ -16,6 +16,7 @@ properties: - const: marvell,armada-8k-nand-controller - const: marvell,armada370-nand-controller - enum: + - marvell,ac5-nand-controller - marvell,armada370-nand-controller - marvell,pxa3xx-nand-controller - description: legacy bindings diff --git a/dts/Bindings/mtd/microchip,mchp48l640.yaml b/dts/Bindings/mtd/microchip,mchp48l640.yaml index 00882892f4..0ff32bd00b 100644 --- a/dts/Bindings/mtd/microchip,mchp48l640.yaml +++ b/dts/Bindings/mtd/microchip,mchp48l640.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip 48l640 (and similar) serial EERAM diff --git a/dts/Bindings/mtd/nand-controller.yaml b/dts/Bindings/mtd/nand-controller.yaml index 83a4fe4cc2..28167c0cf2 100644 --- a/dts/Bindings/mtd/nand-controller.yaml +++ b/dts/Bindings/mtd/nand-controller.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/mtd/nand-controller.yaml# diff --git a/dts/Bindings/mtd/oxnas-nand.txt b/dts/Bindings/mtd/oxnas-nand.txt deleted file mode 100644 index 2ba07fc8b7..0000000000 --- a/dts/Bindings/mtd/oxnas-nand.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS NAND Controller - -Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings. - -Required properties: - - compatible: "oxsemi,ox820-nand" - - reg: Base address and length for NAND mapped memory. - -Optional Properties: - - clocks: phandle to the NAND gate clock if needed. - - resets: phandle to the NAND reset control if needed. - -Example: - -nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; diff --git a/dts/Bindings/mtd/partitions/seama.yaml b/dts/Bindings/mtd/partitions/seama.yaml new file mode 100644 index 0000000000..4c1cbf43e8 --- /dev/null +++ b/dts/Bindings/mtd/partitions/seama.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Seattle Image Partitions + +description: The SEAttle iMAge (SEAMA) partition is a type of partition + used for NAND flash devices. This type of flash image is found in some + D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, + DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 + (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type + does not have children defined in the device tree, they need to be + detected by software. + +allOf: + - $ref: partition.yaml# + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: seama + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "seama"; + reg = <0x0 0x800000>; + label = "firmware"; + }; + }; diff --git a/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml index 56cbb42b5a..eba2f3026a 100644 --- a/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/dts/Bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -19,12 +19,14 @@ properties: - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt - qcom,qca6390-bt - qcom,wcn6750-bt - qcom,wcn6855-bt + - qcom,wcn7850-bt enable-gpios: maxItems: 1 @@ -57,6 +59,9 @@ properties: vddaon-supply: description: VDD_AON supply regulator handle + vdddig-supply: + description: VDD_DIG supply regulator handle + vddbtcxmx-supply: description: VDD_BT_CXMX supply regulator handle @@ -72,6 +77,9 @@ properties: vddrfa1p2-supply: description: VDD_RFA_1P2 supply regulator handle + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + vddrfa2p2-supply: description: VDD_RFA_2P2 supply regulator handle @@ -111,6 +119,7 @@ allOf: compatible: contains: enum: + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt @@ -155,6 +164,22 @@ allOf: - vddrfa0p8-supply - vddrfa1p2-supply - vddrfa1p7-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn7850-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vdddig-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p9-supply examples: - | diff --git a/dts/Bindings/net/brcm,asp-v2.0.yaml b/dts/Bindings/net/brcm,asp-v2.0.yaml new file mode 100644 index 0000000000..aa3162c748 --- /dev/null +++ b/dts/Bindings/net/brcm,asp-v2.0.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom ASP 2.0 Ethernet controller + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom Ethernet controller first introduced with 72165 + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm74165-asp + - const: brcm,asp-v2.1 + - items: + - enum: + - brcm,bcm72165-asp + - const: brcm,asp-v2.0 + + "#address-cells": + const: 1 + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: true + + interrupts: + minItems: 1 + items: + - description: RX/TX interrupt + - description: Port 0 Wake-on-LAN + - description: Port 1 Wake-on-LAN + + clocks: + maxItems: 1 + + ethernet-ports: + type: object + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-9]+$": + type: object + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: Port number + + brcm,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ASP Channel Number + + The depacketizer channel that consumes packets from + the unimac/port. + + required: + - reg + - brcm,channel + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + ASP internal UniMAC MDIO bus + +required: + - compatible + - reg + - interrupts + - clocks + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@9c00000 { + compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + reg = <0x9c00000 0x1fff14>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x0 0x9c00000 0x1fff14>; + clocks = <&scmi 14>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@c614 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xc614 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + mdio@ce14 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xce14 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + brcm,channel = <8>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + brcm,channel = <9>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; + }; diff --git a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt index d0935d2afe..284cddb311 100644 --- a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,4 +1,4 @@ -* Broadcom Starfighter 2 integrated swich +* Broadcom Starfighter 2 integrated switch See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. diff --git a/dts/Bindings/net/brcm,unimac-mdio.yaml b/dts/Bindings/net/brcm,unimac-mdio.yaml index 0be426ee1e..6684810fcb 100644 --- a/dts/Bindings/net/brcm,unimac-mdio.yaml +++ b/dts/Bindings/net/brcm,unimac-mdio.yaml @@ -22,6 +22,8 @@ properties: - brcm,genet-mdio-v3 - brcm,genet-mdio-v4 - brcm,genet-mdio-v5 + - brcm,asp-v2.0-mdio + - brcm,asp-v2.1-mdio - brcm,unimac-mdio reg: diff --git a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml index 9c494957a0..e42ea28d6a 100644 --- a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can - const: allwinner,sun8i-r40-can + - const: allwinner,sun20i-d1-can reg: maxItems: 1 @@ -37,8 +38,9 @@ properties: if: properties: compatible: - contains: - const: allwinner,sun8i-r40-can + enum: + - allwinner,sun8i-r40-can + - allwinner,sun20i-d1-can then: required: diff --git a/dts/Bindings/net/can/bosch,m_can.yaml b/dts/Bindings/net/can/bosch,m_can.yaml index 67879aab62..f9ffb963d6 100644 --- a/dts/Bindings/net/can/bosch,m_can.yaml +++ b/dts/Bindings/net/can/bosch,m_can.yaml @@ -122,16 +122,15 @@ required: - compatible - reg - reg-names - - interrupts - - interrupt-names - clocks - clock-names - bosch,mram-cfg -additionalProperties: false +unevaluatedProperties: false examples: - | + // Example with interrupts #include <dt-bindings/clock/imx6sx-clock.h> can@20e8000 { compatible = "bosch,m_can"; @@ -149,4 +148,21 @@ examples: }; }; + - | + // Example with timer polling + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + ... diff --git a/dts/Bindings/net/can/cc770.txt b/dts/Bindings/net/can/cc770.txt index 77027bf646..042200cf44 100644 --- a/dts/Bindings/net/can/cc770.txt +++ b/dts/Bindings/net/can/cc770.txt @@ -26,7 +26,7 @@ Optional properties: will be disabled. - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified, - a resonable value will be calculated. + a reasonable value will be calculated. - bosch,disconnect-rx0-input : see data sheet. diff --git a/dts/Bindings/net/can/tcan4x5x.txt b/dts/Bindings/net/can/tcan4x5x.txt index e3501bfa22..170e23f061 100644 --- a/dts/Bindings/net/can/tcan4x5x.txt +++ b/dts/Bindings/net/can/tcan4x5x.txt @@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 @@ -21,8 +24,10 @@ Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. Example: tcan4x5x: tcan4x5x@0 { diff --git a/dts/Bindings/net/can/xilinx,can.yaml b/dts/Bindings/net/can/xilinx,can.yaml index 897d2cbda4..64d57c343e 100644 --- a/dts/Bindings/net/can/xilinx,can.yaml +++ b/dts/Bindings/net/can/xilinx,can.yaml @@ -46,6 +46,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx mailbox buffer count (CAN FD) + resets: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/net/davicom,dm9000.yaml b/dts/Bindings/net/davicom,dm9000.yaml new file mode 100644 index 0000000000..66a7c6eec7 --- /dev/null +++ b/dts/Bindings/net/davicom,dm9000.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Davicom DM9000 Fast Ethernet Controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + const: davicom,dm9000 + + reg: + items: + - description: Address registers + - description: Data registers + + interrupts: + maxItems: 1 + + davicom,no-eeprom: + type: boolean + description: Configuration EEPROM is not available + + davicom,ext-phy: + type: boolean + description: Use external PHY + + reset-gpios: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + - $ref: /schemas/net/ethernet-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@a8000000 { + compatible = "davicom,dm9000"; + reg = <0xa8000000 0x2>, <0xa8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; diff --git a/dts/Bindings/net/davicom-dm9000.txt b/dts/Bindings/net/davicom-dm9000.txt deleted file mode 100644 index 64c159e9cb..0000000000 --- a/dts/Bindings/net/davicom-dm9000.txt +++ /dev/null @@ -1,27 +0,0 @@ -Davicom DM9000 Fast Ethernet controller - -Required properties: -- compatible = "davicom,dm9000"; -- reg : physical addresses and sizes of registers, must contain 2 entries: - first entry : address register, - second entry : data register. -- interrupts : interrupt specifier specific to interrupt controller - -Optional properties: -- davicom,no-eeprom : Configuration EEPROM is not available -- davicom,ext-phy : Use external PHY -- reset-gpios : phandle of gpio that will be used to reset chip during probe -- vcc-supply : phandle of regulator that will be used to enable power to chip - -Example: - - ethernet@18000000 { - compatible = "davicom,dm9000"; - reg = <0x18000000 0x2 0x18000004 0x2>; - interrupt-parent = <&gpn>; - interrupts = <7 4>; - local-mac-address = [00 00 de ad be ef]; - davicom,no-eeprom; - reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; - vcc-supply = <ð0_power>; - }; diff --git a/dts/Bindings/net/dsa/brcm,sf2.yaml b/dts/Bindings/net/dsa/brcm,sf2.yaml index c745407f2f..b06c416893 100644 --- a/dts/Bindings/net/dsa/brcm,sf2.yaml +++ b/dts/Bindings/net/dsa/brcm,sf2.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom Starfighter 2 integrated swich +title: Broadcom Starfighter 2 integrated switch maintainers: - Florian Fainelli <f.fainelli@gmail.com> diff --git a/dts/Bindings/net/dsa/dsa.yaml b/dts/Bindings/net/dsa/dsa.yaml index 8d971813ba..ec74a660be 100644 --- a/dts/Bindings/net/dsa/dsa.yaml +++ b/dts/Bindings/net/dsa/dsa.yaml @@ -36,7 +36,7 @@ additionalProperties: true $defs: ethernet-ports: description: A DSA switch without any extra port properties - $ref: '#/' + $ref: '#' patternProperties: "^(ethernet-)?ports$": diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt index 33726134f5..6ec0c181b6 100644 --- a/dts/Bindings/net/dsa/marvell.txt +++ b/dts/Bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6163, 6190, 6190X, 6191, 6290, 6390, 6390X + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/dts/Bindings/net/dsa/microchip,ksz.yaml b/dts/Bindings/net/dsa/microchip,ksz.yaml index e51be1ac03..03b5567be3 100644 --- a/dts/Bindings/net/dsa/microchip,ksz.yaml +++ b/dts/Bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,9 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml index 6b0d359367..9f6a5ccbce 100644 --- a/dts/Bindings/net/ethernet-controller.yaml +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -66,6 +66,7 @@ properties: - mii - gmii - sgmii + - psgmii - qsgmii - qusgmii - tbi diff --git a/dts/Bindings/net/ethernet-phy.yaml b/dts/Bindings/net/ethernet-phy.yaml index c1241c8a3b..8fb2a6ee7e 100644 --- a/dts/Bindings/net/ethernet-phy.yaml +++ b/dts/Bindings/net/ethernet-phy.yaml @@ -110,7 +110,7 @@ properties: $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after + TX/RX lanes. This property allows the PHY to work correctly after e.g. wrong bootstrap configuration caused by issues in PCB layout design. diff --git a/dts/Bindings/net/faraday,ftgmac100.yaml b/dts/Bindings/net/faraday,ftgmac100.yaml new file mode 100644 index 0000000000..9bcbacb664 --- /dev/null +++ b/dts/Bindings/net/faraday,ftgmac100.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTGMAC100 gigabit ethernet controller + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Po-Yu Chuang <ratbert@faraday-tech.com> + +properties: + compatible: + oneOf: + - const: faraday,ftgmac100 + - items: + - enum: + - aspeed,ast2400-mac + - aspeed,ast2500-mac + - aspeed,ast2600-mac + - const: faraday,ftgmac100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: MAC IP clock + - description: RMII RCLK gate for AST2500/2600 + + clock-names: + minItems: 1 + items: + - const: MACCLK + - const: RCLK + + phy-mode: + enum: + - rgmii + - rmii + + phy-handle: true + + use-ncsi: + description: + Use the NC-SI stack instead of an MDIO PHY. Currently assumes + rmii (100bT) but kept as a separate property in case NC-SI grows support + for a gigabit link. + type: boolean + + no-hw-checksum: + description: + Used to disable HW checksum support. Here for backward + compatibility as the driver now should have correct defaults based on + the SoC. + type: boolean + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@1e660000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + use-ncsi; + }; + + ethernet@1e680000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <2>; + + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; diff --git a/dts/Bindings/net/ftgmac100.txt b/dts/Bindings/net/ftgmac100.txt deleted file mode 100644 index 29234021f6..0000000000 --- a/dts/Bindings/net/ftgmac100.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Faraday Technology FTGMAC100 gigabit ethernet controller - -Required properties: -- compatible: "faraday,ftgmac100" - - Must also contain one of these if used as part of an Aspeed AST2400 - or 2500 family SoC as they have some subtle tweaks to the - implementation: - - - "aspeed,ast2400-mac" - - "aspeed,ast2500-mac" - - "aspeed,ast2600-mac" - -- reg: Address and length of the register set for the device -- interrupts: Should contain ethernet controller interrupt - -Optional properties: -- phy-handle: See ethernet.txt file in the same directory. -- phy-mode: See ethernet.txt file in the same directory. If the property is - absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for - aspeed parts. Other (unknown) parts will accept any value. -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes - rmii (100bT) but kept as a separate property in case NC-SI grows support - for a gigabit link. -- no-hw-checksum: Used to disable HW checksum support. Here for backward - compatibility as the driver now should have correct defaults based on - the SoC. -- clocks: In accordance with the generic clock bindings. Must describe the MAC - IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The - required MAC clock must be the first cell. -- clock-names: - - - "MACCLK": The MAC IP clock - - "RCLK": Clock gate for the RMII RCLK - -Optional subnodes: -- mdio: See mdio.txt file in the same directory. - -Example: - - mac0: ethernet@1e660000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e660000 0x180>; - interrupts = <2>; - use-ncsi; - }; - -Example with phy-handle: - - mac1: ethernet@1e680000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e680000 0x180>; - interrupts = <2>; - - phy-handle = <&phy>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; - }; diff --git a/dts/Bindings/net/mediatek,net.yaml b/dts/Bindings/net/mediatek,net.yaml index 31cc0c4128..e74502a0af 100644 --- a/dts/Bindings/net/mediatek,net.yaml +++ b/dts/Bindings/net/mediatek,net.yaml @@ -19,10 +19,12 @@ properties: enum: - mediatek,mt2701-eth - mediatek,mt7623-eth + - mediatek,mt7621-eth - mediatek,mt7622-eth - mediatek,mt7629-eth - mediatek,mt7981-eth - mediatek,mt7986-eth + - mediatek,mt7988-eth - ralink,rt5350-eth reg: @@ -32,7 +34,7 @@ properties: clock-names: true interrupts: - minItems: 3 + minItems: 1 maxItems: 4 power-domains: @@ -60,6 +62,12 @@ properties: Phandle to the mediatek hifsys controller used to provide various clocks and reset to the system. + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + mediatek,sgmiisys: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 @@ -121,6 +129,8 @@ allOf: - const: gp1 - const: gp2 + mediatek,infracfg: false + mediatek,pctl: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,6 +145,32 @@ allOf: properties: compatible: contains: + enum: + - mediatek,mt7621-eth + then: + properties: + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ethif + - const: fe + + mediatek,infracfg: false + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: const: mediatek,mt7622-eth then: properties: @@ -159,6 +195,8 @@ allOf: - const: sgmii_ck - const: eth2pll + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 1 maxItems: 1 @@ -204,12 +242,6 @@ allOf: - const: sgmii_ck - const: eth2pll - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the syscon node that handles the path from GMAC to - PHY variants. - mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -250,6 +282,8 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -286,6 +320,67 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 34 + maxItems: 34 + + clock-names: + items: + - const: crypto + - const: fe + - const: gp2 + - const: gp1 + - const: gp3 + - const: ethwarp_wocpu2 + - const: ethwarp_wocpu1 + - const: ethwarp_wocpu0 + - const: esw + - const: netsys0 + - const: netsys1 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: top_usxgmii0_sel + - const: top_usxgmii1_sel + - const: top_sgm0_sel + - const: top_sgm1_sel + - const: top_xfi_phy0_xtal_sel + - const: top_xfi_phy1_xtal_sel + - const: top_eth_gmii_sel + - const: top_eth_refck_50m_sel + - const: top_eth_sys_200m_sel + - const: top_eth_sys_sel + - const: top_eth_xgmii_sel + - const: top_eth_mii_sel + - const: top_netsys_sel + - const: top_netsys_500m_sel + - const: top_netsys_pao_2x_sel + - const: top_netsys_sync_250m_sel + - const: top_netsys_ppefb_250m_sel + - const: top_netsys_warp_sel + - const: wocpu1 + - const: wocpu0 + - const: xgp1 + - const: xgp2 + - const: xgp3 + mediatek,sgmiisys: minItems: 2 maxItems: 2 diff --git a/dts/Bindings/net/mediatek-dwmac.yaml b/dts/Bindings/net/mediatek-dwmac.yaml index 5aa320c8af..ed9d845f60 100644 --- a/dts/Bindings/net/mediatek-dwmac.yaml +++ b/dts/Bindings/net/mediatek-dwmac.yaml @@ -129,7 +129,7 @@ properties: type: boolean description: If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled. - Otherwise, PHY WOL is perferred. + Otherwise, PHY WOL is preferred. required: - compatible diff --git a/dts/Bindings/net/microchip,lan95xx.yaml b/dts/Bindings/net/microchip,lan95xx.yaml index 0b97e14d94..77c9bbf987 100644 --- a/dts/Bindings/net/microchip,lan95xx.yaml +++ b/dts/Bindings/net/microchip,lan95xx.yaml @@ -33,7 +33,7 @@ properties: - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) - - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Device ID) - usb424,9e00 # SMSC9500A USB Ethernet Device - usb424,9e01 # SMSC9505A USB Ethernet Device - usb424,9e08 # SMSC LAN89530 USB Ethernet Device diff --git a/dts/Bindings/net/motorcomm,yt8xxx.yaml b/dts/Bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf..26688e2302 100644 --- a/dts/Bindings/net/motorcomm,yt8xxx.yaml +++ b/dts/Bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,40 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC. diff --git a/dts/Bindings/net/nfc/marvell,nci.yaml b/dts/Bindings/net/nfc/marvell,nci.yaml index 8e9a95f24c..89663fdd3e 100644 --- a/dts/Bindings/net/nfc/marvell,nci.yaml +++ b/dts/Bindings/net/nfc/marvell,nci.yaml @@ -37,13 +37,13 @@ properties: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on falling edge. + triggered on falling edge. i2c-int-rising: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on rising edge. + triggered on rising edge. break-control: type: boolean diff --git a/dts/Bindings/net/oxnas-dwmac.txt b/dts/Bindings/net/oxnas-dwmac.txt deleted file mode 100644 index 27db496f1c..0000000000 --- a/dts/Bindings/net/oxnas-dwmac.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS DWMAC Ethernet controller - -The device inherits all the properties of the dwmac/stmmac devices -described in the file stmmac.txt in the current directory with the -following changes. - -Required properties on all platforms: - -- compatible: For the OX820 SoC, it should be : - - "oxsemi,ox820-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - For the OX810SE SoC, it should be : - - "oxsemi,ox810se-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - -- clocks: Should contain phandles to the following clocks -- clock-names: Should contain the following: - - "stmmaceth" for the host clock - see stmmac.txt - - "gmac" for the peripheral gate clock - -- oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Example : - -etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - -}; diff --git a/dts/Bindings/net/qca,ar803x.yaml b/dts/Bindings/net/qca,ar803x.yaml index 161d289193..3acd09f0da 100644 --- a/dts/Bindings/net/qca,ar803x.yaml +++ b/dts/Bindings/net/qca,ar803x.yaml @@ -75,6 +75,7 @@ properties: description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object @@ -82,6 +83,7 @@ properties: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false unevaluatedProperties: false diff --git a/dts/Bindings/net/rockchip-dwmac.yaml b/dts/Bindings/net/rockchip-dwmac.yaml index 7f324c6da9..70bbc4220e 100644 --- a/dts/Bindings/net/rockchip-dwmac.yaml +++ b/dts/Bindings/net/rockchip-dwmac.yaml @@ -80,6 +80,7 @@ properties: "output" means GMAC provides the reference clock. $ref: /schemas/types.yaml#/definitions/string enum: [input, output] + default: input rockchip,grf: description: The phandle of the syscon node for the general register file. diff --git a/dts/Bindings/net/samsung-sxgbe.txt b/dts/Bindings/net/samsung-sxgbe.txt index 2cff6d8a58..b9381b761a 100644 --- a/dts/Bindings/net/samsung-sxgbe.txt +++ b/dts/Bindings/net/samsung-sxgbe.txt @@ -5,10 +5,10 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain the SXGBE interrupts These interrupts are ordered by fixed and follows variable - trasmit DMA interrupts, receive DMA interrupts and lpi interrupt. + transmit DMA interrupts, receive DMA interrupts and lpi interrupt. index 0 - this is fixed common interrupt of SXGBE and it is always available. - index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts + index 1 to 25 - 8 variable transmit interrupts, variable 16 receive interrupts and 1 optional lpi interrupt. - phy-mode: String, operation mode of the PHY interface. Supported values are: "sgmii", "xgmii". diff --git a/dts/Bindings/net/snps,dwc-qos-ethernet.txt b/dts/Bindings/net/snps,dwc-qos-ethernet.txt index ad3c6e109c..bb0224a3e8 100644 --- a/dts/Bindings/net/snps,dwc-qos-ethernet.txt +++ b/dts/Bindings/net/snps,dwc-qos-ethernet.txt @@ -110,7 +110,7 @@ Optional properties: It depends on the SoC configuration. - snps,read-requests: Number of read requests that the AXI port can issue. It depends on the SoC configuration. -- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB +- snps,burst-map: Bitmap of allowed AXI burst lengths, with the LSB representing 4, then 8 etc. - snps,txpbl: DMA Programmable burst length for the TX DMA - snps,rxpbl: DMA Programmable burst length for the RX DMA diff --git a/dts/Bindings/net/sti-dwmac.txt b/dts/Bindings/net/sti-dwmac.txt index 42cd075456..e16287c06e 100644 --- a/dts/Bindings/net/sti-dwmac.txt +++ b/dts/Bindings/net/sti-dwmac.txt @@ -21,7 +21,7 @@ Optional properties: MAC can generate it. - st,tx-retime-src: This specifies which clk is wired up to the mac for retimeing tx lines. This is totally board dependent and can take one of the - posssible values from "txclk", "clk_125" or "clkgen". + possible values from "txclk", "clk_125" or "clkgen". If not passed, the internal clock will be used by default. - sti-ethclk: this is the phy clock. - sti-clkconf: this is an extra sysconfig register, available in new SoCs, diff --git a/dts/Bindings/net/ti,icss-iep.yaml b/dts/Bindings/net/ti,icss-iep.yaml new file mode 100644 index 0000000000..f5c22d6dca --- /dev/null +++ b/dts/Bindings/net/ti,icss-iep.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icss-iep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am642-icss-iep + - ti,j721e-icss-iep + - const: ti,am654-icss-iep + + - const: ti,am654-icss-iep + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the IEP source clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + /* AM65x */ + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; diff --git a/dts/Bindings/net/ti,icssg-prueth.yaml b/dts/Bindings/net/ti,icssg-prueth.yaml new file mode 100644 index 0000000000..311c570165 --- /dev/null +++ b/dts/Bindings/net/ti,icssg-prueth.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSSG PRUSS Ethernet + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +description: + Ethernet based on the Programmable Real-Time Unit and Industrial + Communication Subsystem. + +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + +properties: + compatible: + enum: + - ti,am654-icssg-prueth # for AM65x SoC family + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MSMC SRAM node + + dmas: + maxItems: 10 + + dma-names: + items: + - const: tx0-0 + - const: tx0-1 + - const: tx0-2 + - const: tx0-3 + - const: tx1-0 + - const: tx1-1 + - const: tx1-2 + - const: tx1-3 + - const: rx0 + - const: rx1 + + ti,mii-g-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_G_RT module's syscon regmap. + + ti,mii-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_RT module's syscon regmap + + ti,iep: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + items: + maxItems: 1 + description: + phandle to IEP (Industrial Ethernet Peripheral) for ICSSG + + interrupts: + maxItems: 2 + description: + Interrupt specifiers to TX timestamp IRQ. + + interrupt-names: + items: + - const: tx_ts0 + - const: tx_ts1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + ^port@[0-1]$: + type: object + description: ICSSG PRUETH external ports + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [0, 1] + description: ICSSG PRUETH port number + + interrupts: + maxItems: 1 + + ti,syscon-rgmii-delay: + items: + - items: + - description: phandle to system controller node + - description: The offset to ICSSG control register + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to system controller node and register offset + to ICSSG control register for RGMII transmit delay + + required: + - reg + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - sram + - dmas + - dma-names + - ethernet-ports + - ti,mii-g-rt + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + /* Example k3-am654 base board SR2.0, dual-emac */ + pruss2_eth: ethernet { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf", + "ti-pruss/am65x-rtu0-prueth-fw.elf", + "ti-pruss/am65x-txpru0-prueth-fw.elf", + "ti-pruss/am65x-pru1-prueth-fw.elf", + "ti-pruss/am65x-rtu1-prueth-fw.elf", + "ti-pruss/am65x-txpru1-prueth-fw.elf"; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + pruss2_emac0: port@0 { + reg = <0>; + phy-handle = <&pruss2_eth0_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 24>; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + pruss2_emac1: port@1 { + reg = <1>; + phy-handle = <&pruss2_eth1_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 25>; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml index 67b63f119f..252207adbc 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.yaml +++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7981-wmac - mediatek,mt7986-wmac reg: @@ -71,6 +72,14 @@ properties: ieee80211-freq-limit: true + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array description: @@ -84,6 +93,7 @@ properties: - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data + deprecated: true big-endian: $ref: /schemas/types.yaml#/definitions/flag @@ -258,7 +268,8 @@ examples: interrupt-parent = <&cpuintc>; interrupts = <6>; - mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; }; - | diff --git a/dts/Bindings/net/xilinx_gmii2rgmii.txt b/dts/Bindings/net/xilinx_gmii2rgmii.txt deleted file mode 100644 index 038dda48b8..0000000000 --- a/dts/Bindings/net/xilinx_gmii2rgmii.txt +++ /dev/null @@ -1,35 +0,0 @@ -XILINX GMIITORGMII Converter Driver Device Tree Bindings --------------------------------------------------------- - -The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media -Independent Interface (RGMII) core provides the RGMII between RGMII-compliant -Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. -This core can be used in all three modes of operation(10/100/1000 Mb/s). -The Management Data Input/Output (MDIO) interface is used to configure the -Speed of operation. This core can switch dynamically between the three -Different speed modes by configuring the conveter register through mdio write. - -This converter sits between the ethernet MAC and the external phy. -MAC <==> GMII2RGMII <==> RGMII_PHY - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Should be "xlnx,gmii-to-rgmii-1.0" -- reg : The ID number for the phy, usually a small integer -- phy-handle : Should point to the external phy device. - See ethernet.txt file in the same directory. - -Example: - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { - ...... - }; - gmiitorgmii: gmiitorgmii@8 { - compatible = "xlnx,gmii-to-rgmii-1.0"; - reg = <8>; - phy-handle = <&phy>; - }; - }; diff --git a/dts/Bindings/net/xlnx,gmii-to-rgmii.yaml b/dts/Bindings/net/xlnx,gmii-to-rgmii.yaml new file mode 100644 index 0000000000..0f781dac67 --- /dev/null +++ b/dts/Bindings/net/xlnx,gmii-to-rgmii.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx GMII to RGMII Converter + +maintainers: + - Harini Katakam <harini.katakam@amd.com> + +description: + The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media + Independent Interface (RGMII) core provides the RGMII between RGMII-compliant + ethernet physical media devices (PHY) and the Gigabit Ethernet controller. + This core can be used in all three modes of operation(10/100/1000 Mb/s). + The Management Data Input/Output (MDIO) interface is used to configure the + speed of operation. This core can switch dynamically between the three + different speed modes by configuring the converter register through mdio write. + The core cannot function without an external phy connected to it. + +properties: + compatible: + const: xlnx,gmii-to-rgmii-1.0 + + reg: + minimum: 0 + maximum: 31 + description: The ID number for the phy. + + phy-handle: + $ref: ethernet-controller.yaml#/properties/phy-handle + +required: + - compatible + - reg + - phy-handle + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + }; + gmiitorgmii@8 { + compatible = "xlnx,gmii-to-rgmii-1.0"; + reg = <8>; + phy-handle = <&phy>; + }; + }; diff --git a/dts/Bindings/nios2/nios2.txt b/dts/Bindings/nios2/nios2.txt index b95e831bcb..3e9cabe667 100644 --- a/dts/Bindings/nios2/nios2.txt +++ b/dts/Bindings/nios2/nios2.txt @@ -23,7 +23,7 @@ Required properties: - altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB. - altr,tlb-num-entries: Specifies the number of entries in the TLB. - altr,tlb-ptr-sz: Specifies size of TLB pointer. -- altr,has-mul: Specifies CPU hardware multipy support, should be 1. +- altr,has-mul: Specifies CPU hardware multiply support, should be 1. - altr,has-mmu: Specifies CPU support MMU support, should be 1. - altr,has-initda: Specifies CPU support initda instruction, should be 1. - altr,reset-addr: Specifies CPU reset address diff --git a/dts/Bindings/nvmem/fsl,t1023-sfp.yaml b/dts/Bindings/nvmem/fsl,t1023-sfp.yaml new file mode 100644 index 0000000000..df826b40d8 --- /dev/null +++ b/dts/Bindings/nvmem/fsl,t1023-sfp.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,t1023-sfp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP QorIQ eFuse support + +maintainers: + - Richard Alpe <richard@bit42.se> + +description: + Read support for the eFuses (SFP) on NXP QorIQ series SoC's. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + const: fsl,t1023-sfp + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + efuse@e8000 { + compatible = "fsl,t1023-sfp"; + reg = <0xe8000 0x1000>; + }; +... diff --git a/dts/Bindings/nvmem/layouts/fixed-cell.yaml b/dts/Bindings/nvmem/layouts/fixed-cell.yaml index e698098450..ac2381e660 100644 --- a/dts/Bindings/nvmem/layouts/fixed-cell.yaml +++ b/dts/Bindings/nvmem/layouts/fixed-cell.yaml @@ -11,6 +11,15 @@ maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> properties: + compatible: + oneOf: + - const: mac-base + description: > + Cell with base MAC address to be used for calculating extra relative + addresses. + It can be stored in a plain binary format (cell length 6) or as an + ASCII text like "00:11:22:33:44:55" (cell length 17). + reg: maxItems: 1 @@ -25,6 +34,23 @@ properties: description: Size in bit within the address range specified by reg. +allOf: + - if: + required: [ compatible ] + then: + if: + properties: + compatible: + contains: + const: mac-base + then: + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + required: + - "#nvmem-cell-cells" + required: - reg diff --git a/dts/Bindings/nvmem/layouts/fixed-layout.yaml b/dts/Bindings/nvmem/layouts/fixed-layout.yaml index c271537d07..9bd34bd5af 100644 --- a/dts/Bindings/nvmem/layouts/fixed-layout.yaml +++ b/dts/Bindings/nvmem/layouts/fixed-layout.yaml @@ -44,6 +44,18 @@ examples: #address-cells = <1>; #size-cells = <1>; + mac@100 { + compatible = "mac-base"; + reg = <0x100 0x6>; + #nvmem-cell-cells = <1>; + }; + + mac@110 { + compatible = "mac-base"; + reg = <0x110 0x11>; + #nvmem-cell-cells = <1>; + }; + calibration@4000 { reg = <0x4000 0x100>; }; diff --git a/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml b/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml index 714a6538cc..ee8ac32233 100644 --- a/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml +++ b/dts/Bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -14,7 +14,7 @@ description: infrastructure shall provide a non-volatile memory with a table whose the content is well specified and gives many information about the manufacturer (name, country of manufacture, etc) as well as device caracteristics (serial - number, hardware version, mac addresses, etc). The underlaying device type + number, hardware version, mac addresses, etc). The underlying device type (flash, EEPROM,...) is not specified. The exact location of each value is also dynamic and should be discovered at run time because it depends on the parameters the manufacturer decided to embed. diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml index 9802441006..9f921d9401 100644 --- a/dts/Bindings/nvmem/nvmem.yaml +++ b/dts/Bindings/nvmem/nvmem.yaml @@ -49,7 +49,10 @@ properties: patternProperties: "@[0-9a-f]+(,[0-7])?$": type: object - $ref: layouts/fixed-cell.yaml + allOf: + - $ref: layouts/fixed-cell.yaml + - properties: + compatible: false deprecated: true additionalProperties: true diff --git a/dts/Bindings/nvmem/qcom,qfprom.yaml b/dts/Bindings/nvmem/qcom,qfprom.yaml index 6cd4682a16..8740938c32 100644 --- a/dts/Bindings/nvmem/qcom,qfprom.yaml +++ b/dts/Bindings/nvmem/qcom,qfprom.yaml @@ -23,11 +23,13 @@ properties: - qcom,ipq8064-qfprom - qcom,ipq8074-qfprom - qcom,ipq9574-qfprom + - qcom,msm8226-qfprom - qcom,msm8916-qfprom - qcom,msm8974-qfprom - qcom,msm8976-qfprom - qcom,msm8996-qfprom - qcom,msm8998-qfprom + - qcom,qcm2290-qfprom - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom diff --git a/dts/Bindings/nvmem/qcom,sec-qfprom.yaml b/dts/Bindings/nvmem/qcom,sec-qfprom.yaml new file mode 100644 index 0000000000..9b133f783d --- /dev/null +++ b/dts/Bindings/nvmem/qcom,sec-qfprom.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/qcom,sec-qfprom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc, Secure QFPROM Efuse + +maintainers: + - Komal Bajaj <quic_kbajaj@quicinc.com> + +description: + For some of the Qualcomm SoC's, it is possible that the qfprom region is + protected from non-secure access. In such situations, the OS have to use + secure calls to read the region. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + items: + - enum: + - qcom,qdu1000-sec-qfprom + - const: qcom,sec-qfprom + + reg: + items: + - description: The secure qfprom corrected region. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + efuse@221c8000 { + compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom"; + reg = <0 0x221c8000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + multi_chan_ddr: multi-chan-ddr@12b { + reg = <0x12b 0x1>; + bits = <0 2>; + }; + }; + }; + diff --git a/dts/Bindings/opp/operating-points-v2-ti-cpu.yaml b/dts/Bindings/opp/operating-points-v2-ti-cpu.yaml new file mode 100644 index 0000000000..02d1d2c171 --- /dev/null +++ b/dts/Bindings/opp/operating-points-v2-ti-cpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CPU OPP (Operating Performance Points) + +description: + TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx + families, the CPU frequencies subset and the voltage value of each + OPP vary based on the silicon variant used. The data sheet sections + corresponding to "Operating Performance Points" describe the frequency + and voltage values based on device type and speed bin information + blown in corresponding eFuse bits as referred to by the Technical + Reference Manual. + + This document extends the operating-points-v2 binding by providing + the hardware description for the scheme mentioned above. + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-ti-cpu + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + points to syscon node representing the control module + register space of the SoC. + + opp-shared: true + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + additionalProperties: false + + properties: + clock-latency-ns: true + opp-hz: true + opp-microvolt: true + opp-supported-hw: true + opp-suspend: true + turbo-mode: true + + required: + - opp-hz + - opp-supported-hw + +required: + - compatible + - syscon + +additionalProperties: false + +examples: + - | + opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; diff --git a/dts/Bindings/opp/opp-v2-base.yaml b/dts/Bindings/opp/opp-v2-base.yaml index 47e6f36b76..e2f8f7af3c 100644 --- a/dts/Bindings/opp/opp-v2-base.yaml +++ b/dts/Bindings/opp/opp-v2-base.yaml @@ -56,7 +56,7 @@ patternProperties: need to be configured and that is left for the implementation specific binding. minItems: 1 - maxItems: 16 + maxItems: 32 items: maxItems: 1 diff --git a/dts/Bindings/opp/ti,omap-opp-supply.yaml b/dts/Bindings/opp/ti,omap-opp-supply.yaml new file mode 100644 index 0000000000..693f225396 --- /dev/null +++ b/dts/Bindings/opp/ti,omap-opp-supply.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP compatible OPP supply + +description: + OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse + registers, which contain OPP-specific voltage information tailored + for the specific device. This binding provides the information + needed to describe such a hardware values and relate them to program + the primary regulator during an OPP transition. + + Also, some supplies may have an associated vbb-supply, an Adaptive + Body Bias regulator, which must transition in a specific sequence + w.r.t the vdd-supply and clk when making an OPP transition. By + supplying two regulators to the device that will undergo OPP + transitions, we can use the multi-regulator support implemented by + the OPP core to describe both regulators the platform needs. The + OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml + provides further information (refer to Example 4 Handling multiple + regulators). + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + $nodename: + pattern: '^opp-supply(@[0-9a-f]+)?$' + + compatible: + oneOf: + - description: Basic OPP supply controlling VDD and VBB + const: ti,omap-opp-supply + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with + VBB. + const: ti,omap5-opp-supply + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB + const: ti,omap5-core-opp-supply + + reg: + maxItems: 1 + + ti,absolute-max-voltage-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Absolute maximum voltage for the OPP supply in micro-volts. + minimum: 750000 + maximum: 1500000 + + ti,efuse-settings: + description: An array of u32 tuple items providing information about + optimized efuse configuration. + minItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Reference voltage in micro-volts (OPP Voltage) + minimum: 750000 + maximum: 1500000 + multipleOf: 10000 + - description: efuse offset where the optimized voltage is located + multipleOf: 4 + maximum: 256 + +required: + - compatible + - ti,absolute-max-voltage-uv + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,omap-opp-supply + then: + required: + - reg + - ti,efuse-settings + +additionalProperties: false + +examples: + - | + opp-supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + - | + opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = + /* uV offset */ + <1060000 0x0>, + <1160000 0x4>, + <1210000 0x8>; + ti,absolute-max-voltage-uv = <1500000>; + }; diff --git a/dts/Bindings/opp/ti-omap5-opp-supply.txt b/dts/Bindings/opp/ti-omap5-opp-supply.txt deleted file mode 100644 index b70d326117..0000000000 --- a/dts/Bindings/opp/ti-omap5-opp-supply.txt +++ /dev/null @@ -1,63 +0,0 @@ -Texas Instruments OMAP compatible OPP supply description - -OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which -contain data that can be used to adjust voltages programmed for some of their -supplies for more efficient operation. This binding provides the information -needed to read these values and use them to program the main regulator during -an OPP transitions. - -Also, some supplies may have an associated vbb-supply which is an Adaptive Body -Bias regulator which much be transitioned in a specific sequence with regards -to the vdd-supply and clk when making an OPP transition. By supplying two -regulators to the device that will undergo OPP transitions we can make use -of the multi regulator binding that is part of the OPP core described here [1] -to describe both regulators needed by the platform. - -[1] Documentation/devicetree/bindings/opp/opp-v2.yaml - -Required Properties for Device Node: -- vdd-supply: phandle to regulator controlling VDD supply -- vbb-supply: phandle to regulator controlling Body Bias supply - (Usually Adaptive Body Bias regulator) - -Required Properties for opp-supply node: -- compatible: Should be one of: - "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB - "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD - along with VBB - "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD - but no VBB. -- reg: Address and length of the efuse register set for the device (mandatory - only for "ti,omap5-opp-supply") -- ti,efuse-settings: An array of u32 tuple items providing information about - optimized efuse configuration. Each item consists of the following: - volt: voltage in uV - reference voltage (OPP voltage) - efuse_offseet: efuse offset from reg where the optimized voltage is stored. -- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. - -Example: - -/* Device Node (CPU) */ -cpus { - cpu0: cpu@0 { - device_type = "cpu"; - - ... - - vdd-supply = <&vcc>; - vbb-supply = <&abb_mpu>; - }; -}; - -/* OMAP OPP Supply with Class0 registers */ -opp_supply_mpu: opp_supply@4a003b20 { - compatible = "ti,omap5-opp-supply"; - reg = <0x4a003b20 0x8>; - ti,efuse-settings = < - /* uV offset */ - 1060000 0x0 - 1160000 0x4 - 1210000 0x8 - >; - ti,absolute-max-voltage-uv = <1500000>; -}; diff --git a/dts/Bindings/pci/qcom,pcie-ep.yaml b/dts/Bindings/pci/qcom,pcie-ep.yaml index 811112255d..a223ce029c 100644 --- a/dts/Bindings/pci/qcom,pcie-ep.yaml +++ b/dts/Bindings/pci/qcom,pcie-ep.yaml @@ -11,10 +11,13 @@ maintainers: properties: compatible: - enum: - - qcom,sdx55-pcie-ep - - qcom,sdx65-pcie-ep - - qcom,sm8450-pcie-ep + oneOf: + - enum: + - qcom,sdx55-pcie-ep + - qcom,sm8450-pcie-ep + - items: + - const: qcom,sdx65-pcie-ep + - const: qcom,sdx55-pcie-ep reg: items: @@ -71,6 +74,14 @@ properties: description: GPIO used as WAKE# output signal maxItems: 1 + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + resets: maxItems: 1 @@ -98,6 +109,8 @@ required: - interrupts - interrupt-names - reset-gpios + - interconnects + - interconnect-names - resets - reset-names - power-domains @@ -110,7 +123,6 @@ allOf: contains: enum: - qcom,sdx55-pcie-ep - - qcom,sdx65-pcie-ep then: properties: clocks: @@ -167,7 +179,9 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sdx55.h> #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sdx55.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie_ep: pcie-ep@1c00000 { compatible = "qcom,sdx55-pcie-ep"; reg = <0x01c00000 0x3000>, @@ -194,6 +208,9 @@ examples: interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "global", "doorbell"; + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>; + interconnect-names = "pcie-mem", "cpu-pcie"; reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; resets = <&gcc GCC_PCIE_BCR>; diff --git a/dts/Bindings/pci/qcom,pcie.yaml b/dts/Bindings/pci/qcom,pcie.yaml index 81971be4e5..eadba38171 100644 --- a/dts/Bindings/pci/qcom,pcie.yaml +++ b/dts/Bindings/pci/qcom,pcie.yaml @@ -29,6 +29,7 @@ properties: - qcom,pcie-msm8996 - qcom,pcie-qcs404 - qcom,pcie-sa8540p + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sc8280xp @@ -211,6 +212,7 @@ allOf: compatible: contains: enum: + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sc8280xp @@ -748,7 +750,32 @@ allOf: compatible: contains: enum: + - qcom,pcie-sa8775p + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-sa8540p + - qcom,pcie-sa8775p - qcom,pcie-sc8280xp then: required: @@ -790,6 +817,7 @@ allOf: contains: enum: - qcom,pcie-msm8996 + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sdm845 diff --git a/dts/Bindings/pci/rockchip-dw-pcie.yaml b/dts/Bindings/pci/rockchip-dw-pcie.yaml index a4f61ced5e..1ae8dcfa07 100644 --- a/dts/Bindings/pci/rockchip-dw-pcie.yaml +++ b/dts/Bindings/pci/rockchip-dw-pcie.yaml @@ -60,6 +60,61 @@ properties: - const: aux - const: pipe + interrupts: + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + additionalProperties: false + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + msi-map: true num-lanes: true @@ -108,6 +163,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/interrupt-controller/arm-gic.h> bus { #address-cells = <2>; @@ -127,6 +183,12 @@ examples: "aclk_dbi", "pclk", "aux"; device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; linux,pci-domain = <2>; max-link-speed = <2>; msi-map = <0x2000 &its 0x2000 0x1000>; @@ -140,6 +202,14 @@ examples: reset-names = "pipe"; #address-cells = <3>; #size-cells = <2>; + + legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; }; }; ... diff --git a/dts/Bindings/pci/snps,dw-pcie.yaml b/dts/Bindings/pci/snps,dw-pcie.yaml index 1a83f0f65f..8bbdeb8821 100644 --- a/dts/Bindings/pci/snps,dw-pcie.yaml +++ b/dts/Bindings/pci/snps,dw-pcie.yaml @@ -25,6 +25,15 @@ select: allOf: - $ref: /schemas/pci/pci-bus.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + - if: + not: + required: + - msi-map + then: + properties: + interrupt-names: + contains: + const: msi properties: reg: @@ -188,14 +197,15 @@ properties: Link Control register). const: bw_mg - description: + Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for + details. + const: legacy + - description: Vendor-specific IRQ names. Consider using the generic names above for new bindings. oneOf: - description: See native "app" IRQ for details - enum: [ intr ] - allOf: - - contains: - const: msi + enum: [ intr, sys, pmc, msg, err ] additionalProperties: true diff --git a/dts/Bindings/peci/nuvoton,npcm-peci.yaml b/dts/Bindings/peci/nuvoton,npcm-peci.yaml new file mode 100644 index 0000000000..087e02a9ad --- /dev/null +++ b/dts/Bindings/peci/nuvoton,npcm-peci.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/peci/nuvoton,npcm-peci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton PECI Bus + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +allOf: + - $ref: peci-controller.yaml# + +properties: + compatible: + enum: + - nuvoton,npcm750-peci + - nuvoton,npcm845-peci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Clock source for PECI controller. Should reference the APB clock. + maxItems: 1 + + cmd-timeout-ms: + minimum: 1 + maximum: 1000 + default: 1000 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + peci-controller@f0100000 { + compatible = "nuvoton,npcm750-peci"; + reg = <0xf0100000 0x200>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB3>; + cmd-timeout-ms = <1000>; + }; +... diff --git a/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml b/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml index b35c4d256e..99eac888ae 100644 --- a/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml# diff --git a/dts/Bindings/phy/mediatek,tphy.yaml b/dts/Bindings/phy/mediatek,tphy.yaml index 230a17f249..2bb91542e9 100644 --- a/dts/Bindings/phy/mediatek,tphy.yaml +++ b/dts/Bindings/phy/mediatek,tphy.yaml @@ -64,7 +64,7 @@ description: | properties: $nodename: - pattern: "^t-phy@[0-9a-f]+$" + pattern: "^t-phy(@[0-9a-f]+)?$" compatible: oneOf: diff --git a/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml index d16bd6e47f..e9237c58ce 100644 --- a/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml +++ b/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml# diff --git a/dts/Bindings/phy/phy-hisi-inno-usb2.txt b/dts/Bindings/phy/phy-hisi-inno-usb2.txt index 0d70c83410..104953e849 100644 --- a/dts/Bindings/phy/phy-hisi-inno-usb2.txt +++ b/dts/Bindings/phy/phy-hisi-inno-usb2.txt @@ -14,7 +14,7 @@ Required properties: - #size-cells: Must be 0. The INNO USB2 PHY device should be a child node of peripheral controller that -contains the PHY configuration register, and each device suppports up to 2 PHY +contains the PHY configuration register, and each device supports up to 2 PHY ports which are represented as child nodes of INNO USB2 PHY device. Required properties for PHY port node: diff --git a/dts/Bindings/phy/pistachio-usb-phy.txt b/dts/Bindings/phy/pistachio-usb-phy.txt index afbc7e24a3..c7970c07ee 100644 --- a/dts/Bindings/phy/pistachio-usb-phy.txt +++ b/dts/Bindings/phy/pistachio-usb-phy.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Must contain an entry for each entry in clock-names. See ../clock/clock-bindings.txt for details. - clock-names: Must include "usb_phy". - - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,cr-top: Must contain a phandle to the CR_TOP syscon node. - img,refclk: Indicates the reference clock source for the USB PHY. See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. diff --git a/dts/Bindings/phy/pxa1928-usb-phy.txt b/dts/Bindings/phy/pxa1928-usb-phy.txt index 660a13ca90..da94426aa6 100644 --- a/dts/Bindings/phy/pxa1928-usb-phy.txt +++ b/dts/Bindings/phy/pxa1928-usb-phy.txt @@ -4,7 +4,7 @@ Required properties: - compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" - reg: base address and length of the registers - clocks - A single clock. From common clock binding. -- #phys-cells: should be 0. From commmon phy binding. +- #phys-cells: should be 0. From common phy binding. - resets: reference to the reset controller Example: diff --git a/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml b/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml new file mode 100644 index 0000000000..2671a048c9 --- /dev/null +++ b/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-hsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: M31 USB PHY + +maintainers: + - Sricharan Ramabadhran <quic_srichara@quicinc.com> + - Varadarajan Narayanan <quic_varada@quicinc.com> + +description: + USB M31 PHY (https://www.m31tech.com) found in Qualcomm + IPQ5018, IPQ5332 SoCs. + +properties: + compatible: + items: + - const: qcom,ipq5332-usb-hsphy + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cfg_ahb + + resets: + maxItems: 1 + + vdd-supply: + description: + Phandle to 5V regulator supply to PHY digital circuit. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,ipq5332-gcc.h> + usb-phy@7b000 { + compatible = "qcom,ipq5332-usb-hsphy"; + reg = <0x0007b000 0x12c>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + clock-names = "cfg_ahb"; + + #phy-cells = <0>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + vdd-supply = <®ulator_fixed_5p0>; + }; diff --git a/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 3d42ee3901..5073007267 100644 --- a/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -13,287 +13,79 @@ description: QMP PHY controller supports physical layer functionality for a number of controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-pcie-phy.yaml. - properties: compatible: enum: - qcom,ipq6018-qmp-pcie-phy - qcom,ipq8074-qmp-gen3-pcie-phy - qcom,ipq8074-qmp-pcie-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy reg: items: - description: serdes - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - clocks: - minItems: 2 - maxItems: 4 + maxItems: 3 clock-names: - minItems: 2 - maxItems: 4 + items: + - const: aux + - const: cfg_ahb + - const: pipe resets: - minItems: 1 maxItems: 2 reset-names: - minItems: 1 - maxItems: 2 - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - clocks: - items: - - description: PIPE clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - "#clock-cells": - const: 0 - - clock-output-names: - maxItems: 1 + items: + - const: phy + - const: common - "#phy-cells": - const: 0 + "#clock-cells": + const: 0 - required: - - reg - - clocks - - "#clock-cells" - - clock-output-names - - "#phy-cells" + clock-output-names: + maxItems: 1 - additionalProperties: false + "#phy-cells": + const: 0 required: - compatible - reg - - "#address-cells" - - "#size-cells" - - ranges - clocks - clock-names - resets - reset-names + - "#clock-cells" + - clock-output-names + - "#phy-cells" additionalProperties: false -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-pcie-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-gen3-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - then: - properties: - clocks: - maxItems: 2 - clock-names: - items: - - const: aux - - const: cfg_ahb - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: refgen - resets: - maxItems: 1 - reset-names: - items: - - const: phy - required: - - vdda-phy-supply - - vdda-pll-supply - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - examples: - | - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - phy-wrapper@1c0e000 { - compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0x01c0e000 0x1c0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x01c0e000 0x1000>; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; + #include <dt-bindings/clock/qcom,gcc-ipq6018.h> + #include <dt-bindings/reset/qcom,gcc-ipq6018.h> - vdda-phy-supply = <&vreg_l10c_0p88>; - vdda-pll-supply = <&vreg_l6b_1p2>; + phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x1000>; - phy@200 { - reg = <0x200 0x170>, - <0x400 0x200>, - <0xa00 0x1f0>, - <0x600 0x170>, - <0x800 0x200>, - <0xe00 0xf4>; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; + #phy-cells = <0>; - #phy-cells = <0>; - }; + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; }; diff --git a/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml deleted file mode 100644 index 881ba543fd..0000000000 --- a/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml +++ /dev/null @@ -1,228 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP PHY controller (UFS, MSM8996) - -maintainers: - - Vinod Koul <vkoul@kernel.org> - -description: - QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-ufs-phy.yaml. - -properties: - compatible: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - - reg: - items: - - description: serdes - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 1 - maxItems: 3 - - clock-names: - minItems: 1 - maxItems: 3 - - power-domains: - maxItems: 1 - - resets: - maxItems: 1 - - reset-names: - items: - - const: ufsphy - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - "#clock-cells": - const: 1 - - "#phy-cells": - const: 0 - - required: - - reg - - "#phy-cells" - - additionalProperties: false - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 1 - clock-names: - items: - - const: ref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 2 - clock-names: - items: - - const: ref - - const: ref_aux - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8450-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: ref - - const: ref_aux - - const: qref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/clock/qcom,rpmh.h> - - phy-wrapper@1d87000 { - compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0x01d87000 0x1c0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x01d87000 0x1000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - vdda-phy-supply = <&vreg_l6b>; - vdda-pll-supply = <&vreg_l3b>; - - phy@400 { - reg = <0x400 0x108>, - <0x600 0x1e0>, - <0xc00 0x1dc>, - <0x800 0x108>, - <0xa00 0x1e0>; - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml index 4c96dab5b9..827109d370 100644 --- a/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml +++ b/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml @@ -23,25 +23,16 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - qcom,msm8998-qmp-usb3-phy - - qcom,sc7180-qmp-usb3-phy - - qcom,sc8180x-qmp-usb3-phy - - qcom,sdm845-qmp-usb3-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-phy - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-usb3-phy - qcom,sm8350-qmp-usb3-uni-phy - - qcom,sm8450-qmp-usb3-phy reg: - minItems: 1 items: - description: serdes - - description: DP_COM "#address-cells": enum: [ 1, 2 ] @@ -131,28 +122,6 @@ allOf: compatible: contains: enum: - - qcom,sc7180-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - maxItems: 1 - reset-names: - items: - - const: phy - - - if: - properties: - compatible: - contains: - enum: - qcom,sdm845-qmp-usb3-uni-phy then: properties: @@ -202,7 +171,6 @@ allOf: compatible: contains: enum: - - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy - qcom,sm8350-qmp-usb3-uni-phy @@ -228,51 +196,6 @@ allOf: compatible: contains: enum: - - qcom,sm8250-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm845-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-phy - - qcom,sm8450-qmp-usb3-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - qcom,msm8998-qmp-usb3-phy then: patternProperties: @@ -293,12 +216,9 @@ allOf: enum: - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-usb3-phy - - qcom,sc7180-qmp-usb3-phy - - qcom,sc8180x-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-phy then: patternProperties: "^phy@[0-9a-f]+$": diff --git a/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml new file mode 100644 index 0000000000..d05eef0e1c --- /dev/null +++ b/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (PCIe, MSM8998) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + const: qcom,msm8998-qmp-pcie-phy + + reg: + items: + - description: serdes + + clocks: + maxItems: 4 + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: pipe + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: true + + vdda-pll-supply: true + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + - "#clock-cells" + - clock-output-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + + phy@1c18000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x1000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + }; diff --git a/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml deleted file mode 100644 index d307343388..0000000000 --- a/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ /dev/null @@ -1,282 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP USB3 DP PHY controller (SC7180) - -description: - The QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-usb43dp-phy.yaml. - -maintainers: - - Wesley Cheng <quic_wcheng@quicinc.com> - -properties: - compatible: - oneOf: - - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sc8180x-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - - qcom,sm8250-qmp-usb3-dp-phy - - items: - - enum: - - qcom,sc7280-qmp-usb3-dp-phy - - const: qcom,sm8250-qmp-usb3-dp-phy - - reg: - items: - - description: Address and length of PHY's USB serdes block. - - description: Address and length of the DP_COM control block. - - description: Address and length of PHY's DP serdes block. - - reg-names: - items: - - const: usb - - const: dp_com - - const: dp - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 3 - maxItems: 4 - - clock-names: - minItems: 3 - maxItems: 4 - - power-domains: - maxItems: 1 - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean - - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - - reset-names: - items: - - const: phy - - const: common - - vdda-phy-supply: - description: - Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. - - vddp-ref-clk-supply: - description: - Phandle to a regulator supply to any specific refclk pll block. - -# Required nodes: -patternProperties: - "^usb3-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The USB3 PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - description: Address and length of pcs_misc. - - clocks: - items: - - description: pipe clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - clock-output-names: - items: - - const: usb3_phy_pipe_clk_src - - '#clock-cells': - const: 0 - - '#phy-cells': - const: 0 - - required: - - reg - - clocks - - '#clock-cells' - - '#phy-cells' - - "^dp-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The DP PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - '#clock-cells': - const: 1 - - '#phy-cells': - const: 0 - - required: - - reg - - '#clock-cells' - - '#phy-cells' - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -allOf: - - if: - properties: - compatible: - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: Phy config clock - - description: 19.2 MHz ref clk - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - - - if: - properties: - compatible: - enum: - - qcom,sc8180x-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: 19.2 MHz ref clk - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: ref - - const: com_aux - - - if: - properties: - compatible: - enum: - - qcom,sm8250-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: Board XO source - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: com_aux - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0x088e9000 0x18c>, - <0x088e8000 0x10>, - <0x088ea000 0x40>; - reg-names = "usb", "dp_com", "dp"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x088e9000 0x2000>; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; - - orientation-switch; - - usb3-phy@200 { - reg = <0x200 0x128>, - <0x400 0x200>, - <0xc00 0x218>, - <0x600 0x128>, - <0x800 0x200>, - <0xa00 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp-phy@88ea200 { - reg = <0xa200 0x200>, - <0xa400 0x200>, - <0xaa00 0x200>, - <0xa600 0x200>, - <0xa800 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index a0407fc795..2c3d6553a7 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -16,11 +16,24 @@ description: properties: compatible: enum: + - qcom,sa8775p-qmp-gen4x2-pcie-phy + - qcom,sa8775p-qmp-gen4x4-pcie-phy + - qcom,sc8180x-qmp-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy - qcom,sc8280xp-qmp-gen3x4-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy - qcom,sdx65-qmp-gen4x2-pcie-phy + - qcom,sm8150-qmp-gen3x1-pcie-phy + - qcom,sm8150-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen4x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy @@ -30,7 +43,7 @@ properties: clocks: minItems: 5 - maxItems: 6 + maxItems: 7 clock-names: minItems: 5 @@ -38,9 +51,10 @@ properties: - const: aux - const: cfg_ahb - const: ref - - const: rchng + - enum: [rchng, refgen] - const: pipe - const: pipediv2 + - const: phy_aux power-domains: maxItems: 1 @@ -84,7 +98,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -120,7 +133,18 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-qmp-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sm8150-qmp-gen3x1-pcie-phy + - qcom,sm8150-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy then: @@ -129,7 +153,16 @@ allOf: maxItems: 5 clock-names: maxItems: 5 - else: + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-qmp-gen3x1-pcie-phy + - qcom,sc8280xp-qmp-gen3x2-pcie-phy + - qcom,sc8280xp-qmp-gen3x4-pcie-phy + then: properties: clocks: minItems: 6 @@ -141,6 +174,20 @@ allOf: compatible: contains: enum: + - qcom,sa8775p-qmp-gen4x2-pcie-phy + - qcom,sa8775p-qmp-gen4x4-pcie-phy + then: + properties: + clocks: + minItems: 7 + clock-names: + minItems: 7 + + - if: + properties: + compatible: + contains: + enum: - qcom,sm8550-qmp-gen4x2-pcie-phy then: properties: diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index a1897a7606..d981d77e82 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -16,21 +16,31 @@ description: properties: compatible: enum: + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8998-qmp-ufs-phy - qcom,sa8775p-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy - qcom,sm6125-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy - qcom,sm7150-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy reg: maxItems: 1 clocks: - minItems: 2 + minItems: 1 maxItems: 3 clock-names: - minItems: 2 + minItems: 1 items: - const: ref - const: ref_aux @@ -75,19 +85,51 @@ allOf: contains: enum: - qcom,sa8775p-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy then: properties: clocks: minItems: 3 clock-names: minItems: 3 - else: + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy + - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + - qcom,sm6125-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm7150-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8550-qmp-ufs-phy + then: properties: clocks: maxItems: 2 clock-names: maxItems: 2 + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + additionalProperties: false examples: diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index ef1c02d8ac..9af203dc87 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -16,8 +16,14 @@ description: properties: compatible: enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc7280-qmp-usb3-dp-phy + - qcom,sc8180x-qmp-usb3-dp-phy - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sdm845-qmp-usb3-dp-phy - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8150-qmp-usb3-dp-phy + - qcom,sm8250-qmp-usb3-dp-phy - qcom,sm8350-qmp-usb3-dp-phy - qcom,sm8450-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy @@ -26,14 +32,17 @@ properties: maxItems: 1 clocks: - maxItems: 4 + minItems: 4 + maxItems: 5 clock-names: + minItems: 4 items: - const: aux - const: ref - const: com_aux - const: usb3_pipe + - const: cfg_ahb power-domains: maxItems: 1 @@ -85,7 +94,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -93,6 +101,40 @@ required: - "#clock-cells" - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + then: + properties: + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + else: + properties: + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + + - if: + properties: + compatible: + enum: + - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8550-qmp-usb3-dp-phy + then: + required: + - power-domains + else: + properties: + power-domains: false + additionalProperties: false examples: diff --git a/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml b/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml index 083fda530b..029569d5fc 100644 --- a/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -15,7 +15,12 @@ description: properties: compatible: - const: qcom,pm8550b-eusb2-repeater + oneOf: + - items: + - enum: + - qcom,pm7550ba-eusb2-repeater + - const: qcom,pm8550b-eusb2-repeater + - const: qcom,pm8550b-eusb2-repeater reg: maxItems: 1 diff --git a/dts/Bindings/phy/realtek,usb2phy.yaml b/dts/Bindings/phy/realtek,usb2phy.yaml new file mode 100644 index 0000000000..9911ada39e --- /dev/null +++ b/dts/Bindings/phy/realtek,usb2phy.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC SoCs USB 2.0 PHY + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: | + Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs. + The USB 2.0 PHY driver is designed to support the XHCI controller. The SoCs + support multiple XHCI controllers. One PHY device node maps to one XHCI + controller. + + RTD1295/RTD1619 SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some + controllers. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1395 SoCs USB + The USB architecture includes two XHCI controllers. + The controller#0 has one USB 2.0 PHY. The controller#1 includes two USB 2.0 + PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + |- phy#1 + + RTD1319/RTD1619b SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319d SoCs USB + The USB architecture includes three XHCI controllers. + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + + RTD1312c/RTD1315e SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + +properties: + compatible: + enum: + - realtek,rtd1295-usb2phy + - realtek,rtd1312c-usb2phy + - realtek,rtd1315e-usb2phy + - realtek,rtd1319-usb2phy + - realtek,rtd1319d-usb2phy + - realtek,rtd1395-usb2phy + - realtek,rtd1395-usb2phy-2port + - realtek,rtd1619-usb2phy + - realtek,rtd1619b-usb2phy + + reg: + items: + - description: PHY data registers + - description: PHY control registers + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 2 + description: + Phandles to nvmem cell that contains the trimming data. + If unspecified, default value is used. + + nvmem-cell-names: + items: + - const: usb-dc-cal + - const: usb-dc-dis + description: + The following names, which correspond to each nvmem-cells. + usb-dc-cal is the driving level for each phy specified via efuse. + usb-dc-dis is the disconnection level for each phy specified via efuse. + + realtek,inverse-hstx-sync-clock: + description: + For one of the phys of RTD1619b SoC, the synchronous clock of the + high-speed tx must be inverted. + type: boolean + + realtek,driving-level: + description: + Control the magnitude of High speed Dp/Dm output swing (mV). + For a different board or port, the original magnitude maybe not meet + the specification. In this situation we can adjust the value to meet + the specification. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + minimum: 0 + maximum: 31 + + realtek,driving-level-compensate: + description: + For RTD1315e SoC, the driving level can be adjusted by reading the + efuse table. This property provides drive compensation. + If the magnitude of High speed Dp/Dm output swing still not meet the + specification, then we can set this value to meet the specification. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + + realtek,disconnection-compensate: + description: + This adjusts the disconnection level compensation for the different + boards with different disconnection level. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + +required: + - compatible + - reg + - "#phy-cells" + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1619b-usb2phy + then: + properties: + realtek,inverse-hstx-sync-clock: false + + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1315e-usb2phy + then: + properties: + realtek,driving-level-compensate: false + +additionalProperties: false + +examples: + - | + usb-phy@13214 { + compatible = "realtek,rtd1619b-usb2phy"; + reg = <0x13214 0x4>, <0x28280 0x4>; + #phy-cells = <0>; + nvmem-cells = <&otp_usb_port0_dc_cal>, <&otp_usb_port0_dc_dis>; + nvmem-cell-names = "usb-dc-cal", "usb-dc-dis"; + + realtek,inverse-hstx-sync-clock; + realtek,driving-level = <0xa>; + realtek,disconnection-compensate = <(-1)>; + }; diff --git a/dts/Bindings/phy/realtek,usb3phy.yaml b/dts/Bindings/phy/realtek,usb3phy.yaml new file mode 100644 index 0000000000..dfe2bb4e59 --- /dev/null +++ b/dts/Bindings/phy/realtek,usb3phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC SoCs USB 3.0 PHY + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: | + Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs. + The USB 3.0 PHY driver is designed to support the XHCI controller. The SoCs + support multiple XHCI controllers. One PHY device node maps to one XHCI + controller. + + RTD1295/RTD1619 SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some + controllers. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319/RTD1619b SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319d SoCs USB + The USB architecture includes three XHCI controllers. + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + +properties: + compatible: + enum: + - realtek,rtd1295-usb3phy + - realtek,rtd1319-usb3phy + - realtek,rtd1319d-usb3phy + - realtek,rtd1619-usb3phy + - realtek,rtd1619b-usb3phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 1 + description: A phandle to the tx lfps swing trim data provided by + a nvmem device, if unspecified, default values shall be used. + + nvmem-cell-names: + items: + - const: usb_u3_tx_lfps_swing_trim + + realtek,amplitude-control-coarse-tuning: + description: + This adjusts the signal amplitude for normal operation and beacon LFPS. + This value is a parameter for coarse tuning. + For different boards, if the default value is inappropriate, this + property can be assigned to adjust. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 255 + minimum: 0 + maximum: 255 + + realtek,amplitude-control-fine-tuning: + description: + This adjusts the signal amplitude for normal operation and beacon LFPS. + This value is used for fine-tuning parameters. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 65535 + minimum: 0 + maximum: 65535 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@13e10 { + compatible = "realtek,rtd1319d-usb3phy"; + reg = <0x13e10 0x4>; + #phy-cells = <0>; + + nvmem-cells = <&otp_usb_u3_tx_lfps_swing_trim>; + nvmem-cell-names = "usb_u3_tx_lfps_swing_trim"; + + realtek,amplitude-control-coarse-tuning = <0x77>; + }; diff --git a/dts/Bindings/phy/rockchip,inno-usb2phy.yaml b/dts/Bindings/phy/rockchip,inno-usb2phy.yaml index 0d6b8c28be..5254413137 100644 --- a/dts/Bindings/phy/rockchip,inno-usb2phy.yaml +++ b/dts/Bindings/phy/rockchip,inno-usb2phy.yaml @@ -20,6 +20,7 @@ properties: - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy + - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy reg: @@ -56,6 +57,14 @@ properties: description: Muxed interrupt for both ports maxItems: 1 + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: apb + rockchip,usbgrf: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -120,15 +129,21 @@ required: - reg - clock-output-names - "#clock-cells" - - host-port - - otg-port + +anyOf: + - required: + - otg-port + - required: + - host-port allOf: - if: properties: compatible: contains: - const: rockchip,rk3568-usb2phy + enum: + - rockchip,rk3568-usb2phy + - rockchip,rk3588-usb2phy then: properties: diff --git a/dts/Bindings/phy/rockchip,pcie3-phy.yaml b/dts/Bindings/phy/rockchip,pcie3-phy.yaml index 9f2d8d2cc7..c4fbffcde6 100644 --- a/dts/Bindings/phy/rockchip,pcie3-phy.yaml +++ b/dts/Bindings/phy/rockchip,pcie3-phy.yaml @@ -13,19 +13,18 @@ properties: compatible: enum: - rockchip,rk3568-pcie3-phy + - rockchip,rk3588-pcie3-phy reg: maxItems: 1 clocks: - minItems: 3 + minItems: 1 maxItems: 3 clock-names: - items: - - const: refclk_m - - const: refclk_n - - const: pclk + minItems: 1 + maxItems: 3 data-lanes: description: which lanes (by position) should be mapped to which @@ -61,6 +60,30 @@ required: - rockchip,phy-grf - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - rockchip,rk3588-pcie3-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: pclk + else: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: refclk_m + - const: refclk_n + - const: pclk + additionalProperties: false examples: diff --git a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml index 5c35e5ceec..46e64fa293 100644 --- a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -19,6 +19,7 @@ properties: - rockchip,rk3128-dsi-dphy - rockchip,rk3368-dsi-dphy - rockchip,rk3568-dsi-dphy + - rockchip,rv1126-dsi-dphy reg: maxItems: 1 diff --git a/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml b/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml index 0e6505e9da..5ac994b3c0 100644 --- a/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml +++ b/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> description: | - The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich + The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. properties: diff --git a/dts/Bindings/phy/samsung,usb3-drd-phy.yaml b/dts/Bindings/phy/samsung,usb3-drd-phy.yaml index 5ba55f9f20..452e584d98 100644 --- a/dts/Bindings/phy/samsung,usb3-drd-phy.yaml +++ b/dts/Bindings/phy/samsung,usb3-drd-phy.yaml @@ -29,6 +29,7 @@ properties: - samsung,exynos5420-usbdrd-phy - samsung,exynos5433-usbdrd-phy - samsung,exynos7-usbdrd-phy + - samsung,exynos850-usbdrd-phy clocks: minItems: 2 diff --git a/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml b/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml new file mode 100644 index 0000000000..7224cde6fc --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive SoC JH7110 MIPI D-PHY Rx Controller + +maintainers: + - Jack Zhu <jack.zhu@starfivetech.com> + - Changhuang Liang <changhuang.liang@starfivetech.com> + +description: + StarFive SoCs contain a MIPI CSI D-PHY based on M31 IP, used to + transfer CSI camera data. + +properties: + compatible: + const: starfive,jh7110-dphy-rx + + reg: + maxItems: 1 + + clocks: + items: + - description: config clock + - description: reference clock + - description: escape mode transmit clock + + clock-names: + items: + - const: cfg + - const: ref + - const: tx + + resets: + items: + - description: DPHY_HW reset + - description: DPHY_B09_ALWAYS_ON reset + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - power-domains + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@19820000 { + compatible = "starfive,jh7110-dphy-rx"; + reg = <0x19820000 0x10000>; + clocks = <&ispcrg 3>, + <&ispcrg 4>, + <&ispcrg 5>; + clock-names = "cfg", "ref", "tx"; + resets = <&ispcrg 2>, + <&ispcrg 3>; + power-domains = <&aon_syscon 1>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml b/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml new file mode 100644 index 0000000000..2e83a6164c --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PCIe 2.0 PHY + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-pcie-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + starfive,sys-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller sys_syscon node. + - description: PHY connect offset of SYS_SYSCONSAIF__SYSCFG register for USB PHY. + description: + The phandle to System Register Controller syscon node and the PHY connect offset + of SYS_SYSCONSAIF__SYSCFG register. Connect PHY to USB3 controller. + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller stg_syscon node. + - description: PHY mode offset of STG_SYSCONSAIF__SYSCFG register. + - description: PHY enable for USB offset of STG_SYSCONSAIF__SYSCFG register. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for PCIe PHY. Total 2 regsisters offset. + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@10210000 { + compatible = "starfive,jh7110-pcie-phy"; + reg = <0x10210000 0x10000>; + #phy-cells = <0>; + starfive,sys-syscon = <&sys_syscon 0x18>; + starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>; + }; diff --git a/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml b/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml new file mode 100644 index 0000000000..269e9f9f12 --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 USB 2.0 PHY + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-usb-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: PHY 125m + - description: app 125m + + clock-names: + items: + - const: 125m + - const: app_125m + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@10200000 { + compatible = "starfive,jh7110-usb-phy"; + reg = <0x10200000 0x10000>; + clocks = <&syscrg 95>, + <&stgcrg 6>; + clock-names = "125m", "app_125m"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml index 9ea30eaba3..3f16ff1448 100644 --- a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml +++ b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml @@ -59,7 +59,7 @@ properties: description: GPIO to signal Type-C cable orientation for lane swap. If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to - achieve the funtionality of an external type-C plug flip mux. + achieve the functionality of an external type-C plug flip mux. typec-dir-debounce-ms: minimum: 100 diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt index 60c9d0ac75..7c7936b89f 100644 --- a/dts/Bindings/phy/ti-phy.txt +++ b/dts/Bindings/phy/ti-phy.txt @@ -62,7 +62,7 @@ Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. -Recommended properies: +Recommended properties: - syscon-phy-power : phandle/offset pair. Phandle to the system control module and the register offset to power on/off the PHY. diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 467016cbb0..4502405703 100644 --- a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -97,7 +97,7 @@ patternProperties: # It's pretty scary, but the basic idea is that: # - One node name can start with either s- or r- for PRCM nodes, # - Then, the name itself can be any repetition of <string>- (to - # accomodate with nodes like uart4-rts-cts-pins), where each + # accommodate with nodes like uart4-rts-cts-pins), where each # string can be either starting with 'p' but in a string longer # than 3, or something that doesn't start with 'p', # - Then, the bank name is optional and will be between pa and pg, diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index 99080c9eaa..4e7a456ea4 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - amlogic,c3-periphs-pinctrl - amlogic,meson-a1-periphs-pinctrl - amlogic,meson-s4-periphs-pinctrl @@ -36,6 +37,10 @@ patternProperties: - const: mux - const: gpio + gpio-line-names: + minItems: 62 # A1 + maxItems: 82 # S4 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml index a7b29ef0ba..e707c222a0 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml @@ -41,6 +41,13 @@ $defs: gpio-ranges: maxItems: 1 + patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - reg - reg-names diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 7c9c94ec5b..0942ea60c6 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -36,6 +36,9 @@ patternProperties: - const: ds - const: gpio + gpio-line-names: + maxItems: 15 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index 4bcb8b6042..e3c8bde305 100644 --- a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -38,6 +38,9 @@ patternProperties: - const: mux - const: ds + gpio-line-names: + maxItems: 85 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index 32d99c9b6a..c1b03147e8 100644 --- a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -44,6 +44,10 @@ patternProperties: - const: pull - const: gpio + gpio-line-names: + minItems: 11 # GXL + maxItems: 16 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index d0441051f3..4ec85b8248 100644 --- a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -45,6 +45,10 @@ patternProperties: - const: pull-enable - const: gpio + gpio-line-names: + minItems: 86 # AXG + maxItems: 120 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bef85c25cd..37c0a74c7c 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -25,30 +25,32 @@ properties: reg: maxItems: 2 -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -56,8 +58,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 14c391f168..863da5d808 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -37,32 +37,34 @@ properties: 0: compatible with "aspeed,ast2500-gfx", "syscon" 1: compatible with "aspeed,ast2500-lhc", "syscon" -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -71,8 +73,6 @@ required: - compatible - aspeed,external-nodes -additionalProperties: false - examples: - | #include <dt-bindings/clock/aspeed-clock.h> diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 859a1889dc..612464aef9 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -23,65 +23,65 @@ properties: compatible: const: aspeed,ast2600-pinctrl -patternProperties: - '^.*$': - if: - type: object - then: - properties: - function: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] - - groups: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + + groups: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] + + pins: true + bias-disable: true allOf: - $ref: pinctrl.yaml# @@ -89,8 +89,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt deleted file mode 100644 index e047a198db..0000000000 --- a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ /dev/null @@ -1,461 +0,0 @@ -Broadcom BCM281xx Pin Controller - -This is a pin controller for the Broadcom BCM281xx SoC family, which includes -BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. - -=== Pin Controller Node === - -Required Properties: - -- compatible: Must be "brcm,bcm11351-pinctrl" -- reg: Base address of the PAD Controller register block and the size - of the block. - -For example, the following is the bare minimum node: - - pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - }; - -As a pin controller device, in addition to the required properties, this node -should also contain the pin configuration nodes that client devices reference, -if any. - -=== Pin Configuration Node === - -Each pin configuration node is a sub-node of the pin controller node and is a -container of an arbitrary number of subnodes, called pin group nodes in this -document. - -Please refer to the pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the definition of a -"pin configuration node". - -=== Pin Group Node === - -A pin group node specifies the desired pin mux and/or pin configuration for an -arbitrary number of pins. The name of the pin group node is optional and not -used. - -A pin group node only affects the properties specified in the node, and has no -effect on any properties that are omitted. - -The pin group node accepts a subset of the generic pin config properties. For -details generic pin config properties, please refer to pinctrl-bindings.txt -and <include/linux/pinctrl/pinconfig-generic.h>. - -Each pin controlled by this pin controller belong to one of three types: -Standard, I2C, and HDMI. Each type accepts a different set of pin config -properties. A list of pins and their types is provided below. - -Required Properties (applicable to all pins): - -- pins: Multiple strings. Specifies the name(s) of one or more pins to - be configured by this node. - -Optional Properties (for standard pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. -- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. -- bias-pull-up: No arguments. Pull up on pin. -- bias-pull-down: No arguments. Pull down on pin. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) -- drive-strength: Integer. Drive strength in mA. Valid values are - 2, 4, 6, 8, 10, 12, 14, 16 mA. - -Optional Properties (for I2C pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 - pull-up resistors (1.2k, 1.8k, 2.7k) available - in parallel for I2C pins, so the valid values - are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Optional Properties (for HDMI pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- slew-rate: Integer. Controls slew rate. - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Example: -// pin controller node -pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - - // pin configuration node - dev_a_default: dev_a_active { - //group node defining 1 standard pin - grp_1 { - pins = "std_pin1"; - function = "alt1"; - input-schmitt-enable; - bias-disable; - slew-rate = <1>; - drive-strength = <4>; - }; - - // group node defining 2 I2C pins - grp_2 { - pins = "i2c_pin1", "i2c_pin2"; - function = "alt2"; - bias-pull-up = <720>; - input-enable; - }; - - // group node defining 2 HDMI pins - grp_3 { - pins = "hdmi_pin1", "hdmi_pin2"; - function = "alt3"; - slew-rate = <1>; - }; - - // other pin group nodes - ... - }; - - // other pin configuration nodes - ... -}; - -In the example above, "dev_a_active" is a pin configuration node with a number -of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in -the "pins" property. Thus, the remaining properties in the "grp_1" node applies -only to this pin, including the following settings: - - setting pinmux to "alt1" - - enabling schmitt-trigger (hystersis) mode - - disabling pin bias - - setting the slew-rate to 1 - - setting the drive strength to 4 mA -Note that neither "input-enable" nor "input-disable" was specified - the pinctrl -subsystem will therefore leave this property unchanged from whatever state it -was in before applying these changes. - -The "pins" property in the pin group node "grp_2" specifies two pins - -"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, -therefore, applies to both of these pins. The properties include: - - setting pinmux to "alt2" - - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors - in parallel) - - enabling both pins' input -"slew-rate" is not specified in this pin group node, so the slew-rate for these -pins are left as-is. - -Finally, "grp_3" defines two HDMI pins. The following properties are applied to -both pins: - - setting pinmux to "alt3" - - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps - Highspeed mode -The input is neither enabled or disabled, and is left untouched. - -=== Pin Names and Type === - -The following are valid pin names and their pin types: - - "adcsync", Standard - "bat_rm", Standard - "bsc1_scl", I2C - "bsc1_sda", I2C - "bsc2_scl", I2C - "bsc2_sda", I2C - "classgpwr", Standard - "clk_cx8", Standard - "clkout_0", Standard - "clkout_1", Standard - "clkout_2", Standard - "clkout_3", Standard - "clkreq_in_0", Standard - "clkreq_in_1", Standard - "cws_sys_req1", Standard - "cws_sys_req2", Standard - "cws_sys_req3", Standard - "digmic1_clk", Standard - "digmic1_dq", Standard - "digmic2_clk", Standard - "digmic2_dq", Standard - "gpen13", Standard - "gpen14", Standard - "gpen15", Standard - "gpio00", Standard - "gpio01", Standard - "gpio02", Standard - "gpio03", Standard - "gpio04", Standard - "gpio05", Standard - "gpio06", Standard - "gpio07", Standard - "gpio08", Standard - "gpio09", Standard - "gpio10", Standard - "gpio11", Standard - "gpio12", Standard - "gpio13", Standard - "gpio14", Standard - "gps_pablank", Standard - "gps_tmark", Standard - "hdmi_scl", HDMI - "hdmi_sda", HDMI - "ic_dm", Standard - "ic_dp", Standard - "kp_col_ip_0", Standard - "kp_col_ip_1", Standard - "kp_col_ip_2", Standard - "kp_col_ip_3", Standard - "kp_row_op_0", Standard - "kp_row_op_1", Standard - "kp_row_op_2", Standard - "kp_row_op_3", Standard - "lcd_b_0", Standard - "lcd_b_1", Standard - "lcd_b_2", Standard - "lcd_b_3", Standard - "lcd_b_4", Standard - "lcd_b_5", Standard - "lcd_b_6", Standard - "lcd_b_7", Standard - "lcd_g_0", Standard - "lcd_g_1", Standard - "lcd_g_2", Standard - "lcd_g_3", Standard - "lcd_g_4", Standard - "lcd_g_5", Standard - "lcd_g_6", Standard - "lcd_g_7", Standard - "lcd_hsync", Standard - "lcd_oe", Standard - "lcd_pclk", Standard - "lcd_r_0", Standard - "lcd_r_1", Standard - "lcd_r_2", Standard - "lcd_r_3", Standard - "lcd_r_4", Standard - "lcd_r_5", Standard - "lcd_r_6", Standard - "lcd_r_7", Standard - "lcd_vsync", Standard - "mdmgpio0", Standard - "mdmgpio1", Standard - "mdmgpio2", Standard - "mdmgpio3", Standard - "mdmgpio4", Standard - "mdmgpio5", Standard - "mdmgpio6", Standard - "mdmgpio7", Standard - "mdmgpio8", Standard - "mphi_data_0", Standard - "mphi_data_1", Standard - "mphi_data_2", Standard - "mphi_data_3", Standard - "mphi_data_4", Standard - "mphi_data_5", Standard - "mphi_data_6", Standard - "mphi_data_7", Standard - "mphi_data_8", Standard - "mphi_data_9", Standard - "mphi_data_10", Standard - "mphi_data_11", Standard - "mphi_data_12", Standard - "mphi_data_13", Standard - "mphi_data_14", Standard - "mphi_data_15", Standard - "mphi_ha0", Standard - "mphi_hat0", Standard - "mphi_hat1", Standard - "mphi_hce0_n", Standard - "mphi_hce1_n", Standard - "mphi_hrd_n", Standard - "mphi_hwr_n", Standard - "mphi_run0", Standard - "mphi_run1", Standard - "mtx_scan_clk", Standard - "mtx_scan_data", Standard - "nand_ad_0", Standard - "nand_ad_1", Standard - "nand_ad_2", Standard - "nand_ad_3", Standard - "nand_ad_4", Standard - "nand_ad_5", Standard - "nand_ad_6", Standard - "nand_ad_7", Standard - "nand_ale", Standard - "nand_cen_0", Standard - "nand_cen_1", Standard - "nand_cle", Standard - "nand_oen", Standard - "nand_rdy_0", Standard - "nand_rdy_1", Standard - "nand_wen", Standard - "nand_wp", Standard - "pc1", Standard - "pc2", Standard - "pmu_int", Standard - "pmu_scl", I2C - "pmu_sda", I2C - "rfst2g_mtsloten3g", Standard - "rgmii_0_rx_ctl", Standard - "rgmii_0_rxc", Standard - "rgmii_0_rxd_0", Standard - "rgmii_0_rxd_1", Standard - "rgmii_0_rxd_2", Standard - "rgmii_0_rxd_3", Standard - "rgmii_0_tx_ctl", Standard - "rgmii_0_txc", Standard - "rgmii_0_txd_0", Standard - "rgmii_0_txd_1", Standard - "rgmii_0_txd_2", Standard - "rgmii_0_txd_3", Standard - "rgmii_1_rx_ctl", Standard - "rgmii_1_rxc", Standard - "rgmii_1_rxd_0", Standard - "rgmii_1_rxd_1", Standard - "rgmii_1_rxd_2", Standard - "rgmii_1_rxd_3", Standard - "rgmii_1_tx_ctl", Standard - "rgmii_1_txc", Standard - "rgmii_1_txd_0", Standard - "rgmii_1_txd_1", Standard - "rgmii_1_txd_2", Standard - "rgmii_1_txd_3", Standard - "rgmii_gpio_0", Standard - "rgmii_gpio_1", Standard - "rgmii_gpio_2", Standard - "rgmii_gpio_3", Standard - "rtxdata2g_txdata3g1", Standard - "rtxen2g_txdata3g2", Standard - "rxdata3g0", Standard - "rxdata3g1", Standard - "rxdata3g2", Standard - "sdio1_clk", Standard - "sdio1_cmd", Standard - "sdio1_data_0", Standard - "sdio1_data_1", Standard - "sdio1_data_2", Standard - "sdio1_data_3", Standard - "sdio4_clk", Standard - "sdio4_cmd", Standard - "sdio4_data_0", Standard - "sdio4_data_1", Standard - "sdio4_data_2", Standard - "sdio4_data_3", Standard - "sim_clk", Standard - "sim_data", Standard - "sim_det", Standard - "sim_resetn", Standard - "sim2_clk", Standard - "sim2_data", Standard - "sim2_det", Standard - "sim2_resetn", Standard - "sri_c", Standard - "sri_d", Standard - "sri_e", Standard - "ssp_extclk", Standard - "ssp0_clk", Standard - "ssp0_fs", Standard - "ssp0_rxd", Standard - "ssp0_txd", Standard - "ssp2_clk", Standard - "ssp2_fs_0", Standard - "ssp2_fs_1", Standard - "ssp2_fs_2", Standard - "ssp2_fs_3", Standard - "ssp2_rxd_0", Standard - "ssp2_rxd_1", Standard - "ssp2_txd_0", Standard - "ssp2_txd_1", Standard - "ssp3_clk", Standard - "ssp3_fs", Standard - "ssp3_rxd", Standard - "ssp3_txd", Standard - "ssp4_clk", Standard - "ssp4_fs", Standard - "ssp4_rxd", Standard - "ssp4_txd", Standard - "ssp5_clk", Standard - "ssp5_fs", Standard - "ssp5_rxd", Standard - "ssp5_txd", Standard - "ssp6_clk", Standard - "ssp6_fs", Standard - "ssp6_rxd", Standard - "ssp6_txd", Standard - "stat_1", Standard - "stat_2", Standard - "sysclken", Standard - "traceclk", Standard - "tracedt00", Standard - "tracedt01", Standard - "tracedt02", Standard - "tracedt03", Standard - "tracedt04", Standard - "tracedt05", Standard - "tracedt06", Standard - "tracedt07", Standard - "tracedt08", Standard - "tracedt09", Standard - "tracedt10", Standard - "tracedt11", Standard - "tracedt12", Standard - "tracedt13", Standard - "tracedt14", Standard - "tracedt15", Standard - "txdata3g0", Standard - "txpwrind", Standard - "uartb1_ucts", Standard - "uartb1_urts", Standard - "uartb1_urxd", Standard - "uartb1_utxd", Standard - "uartb2_urxd", Standard - "uartb2_utxd", Standard - "uartb3_ucts", Standard - "uartb3_urts", Standard - "uartb3_urxd", Standard - "uartb3_utxd", Standard - "uartb4_ucts", Standard - "uartb4_urts", Standard - "uartb4_urxd", Standard - "uartb4_utxd", Standard - "vc_cam1_scl", I2C - "vc_cam1_sda", I2C - "vc_cam2_scl", I2C - "vc_cam2_sda", I2C - "vc_cam3_scl", I2C - "vc_cam3_sda", I2C diff --git a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml new file mode 100644 index 0000000000..90c2752951 --- /dev/null +++ b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM281xx pin controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: brcm,bcm11351-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + unevaluatedProperties: false + + properties: + pins: + description: + Specifies the name(s) of one or more pins to be configured by + this node. + items: + enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, + classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2, + clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1, + cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq, + digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00, + gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14, + gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe, + lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4, + lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1, + mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6, + mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2, + mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6, + mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14, + mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n, + mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1, + mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1, + nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle, + nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1, + pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g, + rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1, + rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0, + rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3, + rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1, + rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3, + sim_clk, sim_data, sim_det, sim_resetn, sim2_clk, + sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e, + ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, + ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk, + ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd, + ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk, + ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken, + traceclk, tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, tracedt08 + tracedt09, tracedt10, tracedt11, tracedt12, tracedt13 + tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts, + uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd, + uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd, + uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd, + uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + + function: + description: + Specifies the pin mux selection. + enum: [ alt1, alt2, alt3, alt4 ] + + slew-rate: + description: | + Meaning depends on configured pin mux: + *_scl or *_sda: + 0: Standard (100 kbps) & Fast (400 kbps) mode + 1: Highspeed (3.4 Mbps) mode + ic_dm or ic_dp: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate + + bias-disable: true + input-disable: true + input-enable: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + + # Optional properties for standard pins + - if: + properties: + pins: + contains: + enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0, + clkout_1, clkout_2, clkout_3, clkreq_in_0, + clkreq_in_1, cws_sys_req1, cws_sys_req2, + cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk, + digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01, + gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, + gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, + lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, + lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7, + lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3, + mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8, + mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3, + mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7, + mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, + mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0, + mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n, + mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk, + mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2, + nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, + nand_cle, nand_oen, nand_rdy_0, nand_rdy_1, + nand_wen, nand_wp, pc1, pc2, pmu_int, + rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc, + rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2, + rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, + rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2, + rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc, + rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2, + rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, + sdio4_data_3, sim_clk, sim_data, sim_det, + sim_resetn, sim2_clk, sim2_data, sim2_det, + sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk, + ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk, + ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, + ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, + ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs, + ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd, + ssp6_txd, stat_1, stat_2, sysclken, traceclk, + tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, + tracedt08, tracedt09, tracedt10, tracedt11, + tracedt12, tracedt13, tracedt14, tracedt15, + txdata3g0, txpwrind, uartb1_ucts, uartb1_urts, + uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd, + uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd, + uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ] + then: + properties: + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ] + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + input-schmitt-enable: true + input-schmitt-disable: true + + # Optional properties for I2C pins + - if: + properties: + pins: + contains: + enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl, + pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + then: + properties: + bias-pull-up: + description: + There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins. + enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ] + + bias-disable: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + + dev-a-active-pins { + /* group node defining 1 standard pin */ + std-grp0 { + pins = "gpio00"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + /* group node defining 2 I2C pins */ + i2c-grp0 { + pins = "bsc1_scl", "bsc1_sda"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + /* group node defining 2 HDMI pins */ + hdmi-grp0 { + pins = "hdmi_scl", "hdmi_sda"; + function = "alt3"; + slew-rate = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml index 739a08f004..beb769e887 100644 --- a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml @@ -11,7 +11,7 @@ maintainers: description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) - controller allows assiging any of 256 possible functions to any of + controller allows assigning any of 256 possible functions to any of 48 IO pins of the SoC. Pin function configuration is performed on a per-pin basis. diff --git a/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml index 222d57541b..7f30ec2f1e 100644 --- a/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml @@ -51,6 +51,10 @@ properties: description: Optional power supply. + reset-gpios: + description: GPIO connected to the XRES pin + maxItems: 1 + patternProperties: '-pins$': type: object diff --git a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml index 35723966b7..890961826c 100644 --- a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml +++ b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml @@ -135,7 +135,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -147,8 +146,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true additionalProperties: type: object allOf: @@ -156,7 +153,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 7f0e2d6cd6..3bbc00df55 100644 --- a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -159,7 +159,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml index 601d86aecd..68e91c05f1 100644 --- a/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml @@ -130,7 +130,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml index 10717cee90..74d52a741f 100644 --- a/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -386,7 +386,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -398,7 +398,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 0f615ada29..5ad65135fe 100644 --- a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -332,7 +332,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -344,7 +344,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index ff24cf29ee..8507bd15f2 100644 --- a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -143,7 +143,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml index 61b33b5416..7b43e78572 100644 --- a/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -149,7 +149,7 @@ patternProperties: deprecated: true description: | DEPRECATED: Please use bias-pull-up instead. - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml index 065dedb357..1690c0ef55 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml index f924652bef..9b7368bd38 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -32,8 +32,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml index 60a4bdf01b..87b6f4f42f 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -23,8 +23,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml index 432ea40209..63cd743a30 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -24,8 +24,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml index 28ae2e6d0c..e99387a6da 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml index c0eda78487..36c8f3301a 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml +++ b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/dts/Bindings/pinctrl/oxnas,pinctrl.txt b/dts/Bindings/pinctrl/oxnas,pinctrl.txt deleted file mode 100644 index b1159434f5..0000000000 --- a/dts/Bindings/pinctrl/oxnas,pinctrl.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Oxford Semiconductor OXNAS SoC Family Pin Controller - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -OXNAS 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configurations of -pins, optional function, and optional mux related configuration. - -Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - - oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - function: Mux function for the specified pins. - - bias-pull-up: Enable weak pull-up. - -Example: - -pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart2: pinctrl_uart2 { - uart2a { - pins = "gpio31"; - function = "fct3"; - }; - uart2b { - pins = "gpio32"; - function = "fct3"; - }; - }; -}; - -uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - resets = <&reset 22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; diff --git a/dts/Bindings/pinctrl/pinctrl-max77620.txt b/dts/Bindings/pinctrl/pinctrl-max77620.txt index 511fc23455..28fbca1800 100644 --- a/dts/Bindings/pinctrl/pinctrl-max77620.txt +++ b/dts/Bindings/pinctrl/pinctrl-max77620.txt @@ -38,7 +38,7 @@ Valid values for function properties are: gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in, reference-out -Theres is also customised properties for the GPIO1, GPIO2 and GPIO3. These +There are also customised properties for the GPIO1, GPIO2 and GPIO3. These customised properties are required to configure FPS configuration parameters of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/dts/Bindings/pinctrl/pinctrl-rk805.txt b/dts/Bindings/pinctrl/pinctrl-rk805.txt index 939cb5b6ff..6ad49e51c7 100644 --- a/dts/Bindings/pinctrl/pinctrl-rk805.txt +++ b/dts/Bindings/pinctrl/pinctrl-rk805.txt @@ -40,7 +40,7 @@ on default. Valid values for function properties are: gpio. -Theres is also not customised properties for any GPIO. +There are also not customised properties for any GPIO. Example: -------- diff --git a/dts/Bindings/pinctrl/pinctrl-single.txt b/dts/Bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b054..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/dts/Bindings/pinctrl/pinctrl-single.yaml b/dts/Bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 0000000000..45a307d3ce --- /dev/null +++ b/dts/Bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,am654-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml index 8aaf50181c..3f8ad07c7c 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml @@ -26,6 +26,7 @@ properties: - qcom,pm6350-gpio - qcom,pm7250b-gpio - qcom,pm7325-gpio + - qcom,pm7550ba-gpio - qcom,pm8005-gpio - qcom,pm8008-gpio - qcom,pm8018-gpio @@ -53,6 +54,8 @@ properties: - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmc8180-gpio + - qcom,pmc8180c-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +71,7 @@ properties: - qcom,pms405-gpio - qcom,pmx55-gpio - qcom,pmx65-gpio + - qcom,pmx75-gpio - enum: - qcom,spmi-gpio @@ -172,6 +176,7 @@ allOf: compatible: contains: enum: + - qcom,pm7550ba-gpio - qcom,pm8226-gpio - qcom,pm8350b-gpio - qcom,pm8550ve-gpio @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,pmx65-gpio + - qcom,pmx75-gpio then: properties: gpio-line-names: @@ -413,6 +419,7 @@ $defs: - gpio1-gpio9 for pm6350 - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 + - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 @@ -456,6 +463,7 @@ $defs: - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) - gpio1-gpio16 for pmx65 + - gpio1-gpio16 for pmx75 items: pattern: "^gpio([0-9]+)$" diff --git a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index fa51fa9536..00c5a00e35 100644 --- a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -17,11 +17,6 @@ properties: compatible: const: qcom,sc7280-lpass-lpi-pinctrl - qcom,adsp-bypass-mode: - description: - Tells ADSP is in bypass mode. - type: boolean - reg: maxItems: 2 diff --git a/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..abac3311fc --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 SoC LPASS LPI TLMM + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. + +properties: + compatible: + const: qcom,sm6115-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-lpass-state" + additionalProperties: false + +$defs: + qcom-sm6115-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, + i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, + i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0a7c0000 0x20000>, + <0x0a950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..2e65ae08dd --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC. + +properties: + compatible: + const: qcom,sm8350-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8350-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8350-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8350-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8350-lpass-lpi-pinctrl"; + reg = <0x033c0000 0x20000>, + <0x03550000 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml index 0fc3c0f52c..181cd1676c 100644 --- a/dts/Bindings/pinctrl/renesas,pfc.yaml +++ b/dts/Bindings/pinctrl/renesas,pfc.yaml @@ -107,7 +107,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true function: true groups: true pins: true @@ -127,9 +126,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml index 83800fcf0c..2bd7d47d0f 100644 --- a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml +++ b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml @@ -108,7 +108,6 @@ additionalProperties: Integers values in "pinmux" argument list are assembled as: ((PORT * 16 + PIN) | MUX_FUNC << 16) - phandle: true input-enable: true output-enable: true @@ -118,9 +117,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml index 37173a64fe..8271e7b2c1 100644 --- a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -37,40 +37,37 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + pinmux: description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + required: + - pinmux - properties: - phandle: true - - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. - - required: - - pinmux - - additionalProperties: false + additionalProperties: false allOf: - $ref: pinctrl.yaml# @@ -82,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ce1a07fc0..145c5442f2 100644 --- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -83,7 +83,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -106,9 +105,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 19d4d2facf..816688580e 100644 --- a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -74,7 +74,6 @@ additionalProperties: offset by 10. Additional identifiers are provided to specify the MDIO source peripheral. - phandle: true bias-disable: true bias-pull-up: description: Pull up the pin with 50 kOhm @@ -91,9 +90,6 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index c87161f295..cb81a17bd0 100644 --- a/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -63,7 +63,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -87,9 +86,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml index a6f34df82e..880da721a9 100644 --- a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -32,7 +32,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -49,7 +48,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/dts/Bindings/pinctrl/sprd,pinctrl.txt b/dts/Bindings/pinctrl/sprd,pinctrl.txt index b1cea7a3a0..779b8ef0f6 100644 --- a/dts/Bindings/pinctrl/sprd,pinctrl.txt +++ b/dts/Bindings/pinctrl/sprd,pinctrl.txt @@ -8,7 +8,7 @@ to configure for some global common configuration, such as domain pad driving level, system control select and so on ("domain pad driving level": One pin can output 3.0v or 1.8v, depending on the related domain pad driving selection, if the related domain pad -slect 3.0v, then the pin can output 3.0v. "system control" is used +select 3.0v, then the pin can output 3.0v. "system control" is used to choose one function (like: UART0) for which system, since we have several systems (AP/CP/CM4) on one SoC.). diff --git a/dts/Bindings/pinctrl/ti,omap-pinctrl.txt b/dts/Bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da..0000000000 --- a/dts/Bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details. diff --git a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 24ad0614e6..01b6f2b578 100644 --- a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -273,6 +273,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. diff --git a/dts/Bindings/pmem/pmem-region.txt b/dts/Bindings/pmem/pmem-region.txt index 5cfa4f016a..cd79975e85 100644 --- a/dts/Bindings/pmem/pmem-region.txt +++ b/dts/Bindings/pmem/pmem-region.txt @@ -19,7 +19,7 @@ Required properties: - compatible = "pmem-region" - reg = <base, size>; - The reg property should specificy an address range that is + The reg property should specify an address range that is translatable to a system physical address range. This address range should be mappable as normal system memory would be (i.e cacheable). @@ -30,7 +30,7 @@ Required properties: node implies no special relationship between the two ranges. Optional properties: - - Any relevant NUMA assocativity properties for the target platform. + - Any relevant NUMA associativity properties for the target platform. - volatile; This property indicates that this region is actually backed by non-persistent memory. This lets the OS know that it diff --git a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml index eab21bb205..d80bbedfe3 100644 --- a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml @@ -12,7 +12,7 @@ maintainers: - Jianxin Pan <jianxin.pan@amlogic.com> description: |+ - Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node + Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node of secure-monitor. properties: @@ -20,6 +20,7 @@ properties: enum: - amlogic,meson-a1-pwrc - amlogic,meson-s4-pwrc + - amlogic,c3-pwrc "#power-domain-cells": const: 1 diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml index f9c211a9a9..9b03c41d36 100644 --- a/dts/Bindings/power/qcom,rpmpd.yaml +++ b/dts/Bindings/power/qcom,rpmpd.yaml @@ -41,6 +41,7 @@ properties: - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd - qcom,sdx65-rpmhpd + - qcom,sdx75-rpmhpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/dts/Bindings/power/renesas,sysc-rmobile.yaml b/dts/Bindings/power/renesas,sysc-rmobile.yaml index 559718997d..fba6914ec4 100644 --- a/dts/Bindings/power/renesas,sysc-rmobile.yaml +++ b/dts/Bindings/power/renesas,sysc-rmobile.yaml @@ -58,7 +58,7 @@ $defs: pd-node: type: object description: - PM domain node representing a PM domain. This node hould be named by + PM domain node representing a PM domain. This node should be named by the real power area name, and thus its name should be unique. properties: diff --git a/dts/Bindings/power/reset/gpio-poweroff.yaml b/dts/Bindings/power/reset/gpio-poweroff.yaml index 45d66c7751..b54ec003a1 100644 --- a/dts/Bindings/power/reset/gpio-poweroff.yaml +++ b/dts/Bindings/power/reset/gpio-poweroff.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml# diff --git a/dts/Bindings/power/reset/gpio-restart.yaml b/dts/Bindings/power/reset/gpio-restart.yaml index d3d18e0f5d..53535de0d4 100644 --- a/dts/Bindings/power/reset/gpio-restart.yaml +++ b/dts/Bindings/power/reset/gpio-restart.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# diff --git a/dts/Bindings/power/reset/restart-handler.yaml b/dts/Bindings/power/reset/restart-handler.yaml index f2ffdd29d5..965a834a3d 100644 --- a/dts/Bindings/power/reset/restart-handler.yaml +++ b/dts/Bindings/power/reset/restart-handler.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# diff --git a/dts/Bindings/power/supply/bq256xx.yaml b/dts/Bindings/power/supply/bq256xx.yaml index 4fe9c37052..a76afe3ca2 100644 --- a/dts/Bindings/power/supply/bq256xx.yaml +++ b/dts/Bindings/power/supply/bq256xx.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2020 Texas Instruments Incorporated %YAML 1.2 --- diff --git a/dts/Bindings/power/supply/sbs,sbs-manager.yaml b/dts/Bindings/power/supply/sbs,sbs-manager.yaml index 99f506d6b0..f255f3858d 100644 --- a/dts/Bindings/power/supply/sbs,sbs-manager.yaml +++ b/dts/Bindings/power/supply/sbs,sbs-manager.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: SBS compliant manger +title: SBS compliant manager maintainers: - Sebastian Reichel <sre@kernel.org> diff --git a/dts/Bindings/power/xlnx,zynqmp-genpd.txt b/dts/Bindings/power/xlnx,zynqmp-genpd.txt deleted file mode 100644 index 54b9f9d0f9..0000000000 --- a/dts/Bindings/power/xlnx,zynqmp-genpd.txt +++ /dev/null @@ -1,34 +0,0 @@ ------------------------------------------------------------ -Device Tree Bindings for the Xilinx Zynq MPSoC PM domains ------------------------------------------------------------ -The binding for zynqmp-power-controller follow the common -generic PM domain binding[1]. - -[1] Documentation/devicetree/bindings/power/power-domain.yaml - -== Zynq MPSoC Generic PM Domain Node == - -Required property: - - Below property should be in zynqmp-firmware node. - - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. - -Power domain ID indexes are mentioned in -include/dt-bindings/power/xlnx-zynqmp-power.h. - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - ... - #power-domain-cells = <1>; - ... - }; -}; - -sata { - ... - power-domains = <&zynqmp_firmware 28>; - ... -}; diff --git a/dts/Bindings/powerpc/fsl/cpus.txt b/dts/Bindings/powerpc/fsl/cpus.txt index 801c660691..4787db8de2 100644 --- a/dts/Bindings/powerpc/fsl/cpus.txt +++ b/dts/Bindings/powerpc/fsl/cpus.txt @@ -28,6 +28,6 @@ PROPERTIES Snoop ID Port Mapping registers, which are part of the CoreNet Coherency fabric (CCF), provide a CoreNet Coherency Subdomain ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from - these registers should be set if the coresponding CPU should be + these registers should be set if the corresponding CPU should be snooped. This property defines a bitmask which selects the bit that should be set if this cpu should be snooped. diff --git a/dts/Bindings/powerpc/fsl/dcsr.txt b/dts/Bindings/powerpc/fsl/dcsr.txt index 4b01e1afaf..62744afb5b 100644 --- a/dts/Bindings/powerpc/fsl/dcsr.txt +++ b/dts/Bindings/powerpc/fsl/dcsr.txt @@ -185,10 +185,10 @@ PROPERTIES with distinct functionality. The first register range describes the CoreNet Debug Controller - functionalty to perform transaction and transaction attribute matches. + functionality to perform transaction and transaction attribute matches. The second register range describes the CoreNet Debug Controller - functionalty to trigger event notifications and debug traces. + functionality to trigger event notifications and debug traces. EXAMPLE dcsr-corenet { diff --git a/dts/Bindings/powerpc/fsl/raideng.txt b/dts/Bindings/powerpc/fsl/raideng.txt index 4ad29b9ac2..ea902bc587 100644 --- a/dts/Bindings/powerpc/fsl/raideng.txt +++ b/dts/Bindings/powerpc/fsl/raideng.txt @@ -60,7 +60,7 @@ Optional property: - fsl,liodn: Specifies the LIODN to be used for Job Ring. This property is normally set by firmware. Value is of 12-bits which is the LIODN number for this JR. - This property is used by the IOMMU (PAMU) to distinquish + This property is used by the IOMMU (PAMU) to distinguish transactions from this JR and than be able to do address translation & protection accordingly. diff --git a/dts/Bindings/powerpc/nintendo/gamecube.txt b/dts/Bindings/powerpc/nintendo/gamecube.txt index b558585b1a..3826bd1219 100644 --- a/dts/Bindings/powerpc/nintendo/gamecube.txt +++ b/dts/Bindings/powerpc/nintendo/gamecube.txt @@ -42,7 +42,7 @@ Nintendo GameCube device tree - compatible : should be "nintendo,flipper-pic" -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/dts/Bindings/powerpc/nintendo/wii.txt b/dts/Bindings/powerpc/nintendo/wii.txt index 3ff6ebbb49..6f69a9dfe1 100644 --- a/dts/Bindings/powerpc/nintendo/wii.txt +++ b/dts/Bindings/powerpc/nintendo/wii.txt @@ -53,7 +53,7 @@ Nintendo Wii device tree - compatible : should be "nintendo,flipper-pic" - interrupt-controller -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/dts/Bindings/pps/pps-gpio.txt b/dts/Bindings/pps/pps-gpio.txt deleted file mode 100644 index 9012a2a02e..0000000000 --- a/dts/Bindings/pps/pps-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Device-Tree Bindings for a PPS Signal on GPIO - -These properties describe a PPS (pulse-per-second) signal connected to -a GPIO pin. - -Required properties: -- compatible: should be "pps-gpio" -- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt - -Additional required properties for the PPS ECHO functionality: -- echo-gpios: one PPS ECHO GPIO in the format described by ../gpio/gpio.txt -- echo-active-ms: duration in ms of the active portion of the echo pulse - -Optional properties: -- assert-falling-edge: when present, assert is indicated by a falling edge - (instead of by a rising edge) - -Example: - pps { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pps>; - - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - assert-falling-edge; - - echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - echo-active-ms = <100>; - - compatible = "pps-gpio"; - }; diff --git a/dts/Bindings/pps/pps-gpio.yaml b/dts/Bindings/pps/pps-gpio.yaml new file mode 100644 index 0000000000..fd4adfa8d2 --- /dev/null +++ b/dts/Bindings/pps/pps-gpio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pps/pps-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PPS Signal via GPIO + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +properties: + compatible: + const: pps-gpio + + gpios: + description: The GPIO that provides the PPS signal. + maxItems: 1 + + echo-gpios: + description: The GPIO that provides the PPS ECHO signal. + maxItems: 1 + + echo-active-ms: + description: Duration in ms of the active portion of the echo pulse. + + assert-falling-edge: + description: Indicates a falling edge assert, when present. Rising edge if absent. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + assert-falling-edge; + echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + echo-active-ms = <100>; + }; diff --git a/dts/Bindings/pwm/brcm,kona-pwm.txt b/dts/Bindings/pwm/brcm,kona-pwm.txt deleted file mode 100644 index c42eecfc81..0000000000 --- a/dts/Bindings/pwm/brcm,kona-pwm.txt +++ /dev/null @@ -1,21 +0,0 @@ -Broadcom Kona PWM controller device tree bindings - -This controller has 6 channels. - -Required Properties : -- compatible: should contain "brcm,kona-pwm" -- reg: physical base address and length of the controller's registers -- clocks: phandle + clock specifier pair for the external clock -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a - description of the cells format. - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - -pwm: pwm@3e01a000 { - compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; - reg = <0x3e01a000 0xc4>; - clocks = <&pwm_clk>; - #pwm-cells = <3>; -}; diff --git a/dts/Bindings/pwm/brcm,kona-pwm.yaml b/dts/Bindings/pwm/brcm,kona-pwm.yaml new file mode 100644 index 0000000000..e86c8053b3 --- /dev/null +++ b/dts/Bindings/pwm/brcm,kona-pwm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/brcm,kona-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family PWM controller + +description: + This controller has 6 channels. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-pwm + - const: brcm,kona-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#pwm-cells': + const: 3 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm281xx.h> + + pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; + }; +... diff --git a/dts/Bindings/pwm/pwm-samsung.yaml b/dts/Bindings/pwm/pwm-samsung.yaml index fe603fb1b2..2162f661ed 100644 --- a/dts/Bindings/pwm/pwm-samsung.yaml +++ b/dts/Bindings/pwm/pwm-samsung.yaml @@ -20,12 +20,17 @@ description: |+ properties: compatible: - enum: - - samsung,s3c2410-pwm # 16-bit, S3C24xx - - samsung,s3c6400-pwm # 32-bit, S3C64xx - - samsung,s5p6440-pwm # 32-bit, S5P64x0 - - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs - - samsung,exynos4210-pwm # 32-bit, Exynos + oneOf: + - enum: + - samsung,s3c2410-pwm # 16-bit, S3C24xx + - samsung,s3c6400-pwm # 32-bit, S3C64xx + - samsung,s5p6440-pwm # 32-bit, S5P64x0 + - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs + - samsung,exynos4210-pwm # 32-bit, Exynos + - items: + - enum: + - samsung,exynosautov9-pwm + - const: samsung,exynos4210-pwm reg: maxItems: 1 diff --git a/dts/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/dts/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml index 9aabdb373a..4d0b596444 100644 --- a/dts/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml +++ b/dts/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml @@ -18,7 +18,7 @@ description: The IP block has a version register so this can be used for detection instead of having to encode the IP version number in the device tree - comaptible. + compatible. allOf: - $ref: pwm.yaml# diff --git a/dts/Bindings/regulator/active-semi,act8846.yaml b/dts/Bindings/regulator/active-semi,act8846.yaml index 3725348bb2..02f45b5834 100644 --- a/dts/Bindings/regulator/active-semi,act8846.yaml +++ b/dts/Bindings/regulator/active-semi,act8846.yaml @@ -28,75 +28,37 @@ properties: the VSEL pin is assumed to be low. type: boolean - regulators: - type: object - additionalProperties: false + inl1-supply: + description: Handle to the INL1 input supply (REG5-7) - properties: - REG1: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + inl2-supply: + description: Handle to the INL2 input supply (REG8-9) - properties: - vp1-supply: - description: Handle to the VP1 input supply + inl3-supply: + description: Handle to the INL3 input supply (REG10-12) - REG2: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp1-supply: + description: Handle to the VP1 input supply (REG1) - properties: - vp2-supply: - description: Handle to the VP2 input supply + vp2-supply: + description: Handle to the VP2 input supply (REG2) - REG3: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp3-supply: + description: Handle to the VP3 input supply (REG3) - properties: - vp3-supply: - description: Handle to the VP3 input supply - - REG4: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp4-supply: + description: Handle to the VP4 input supply (REG4) - properties: - vp4-supply: - description: Handle to the VP4 input supply + regulators: + type: object + additionalProperties: false patternProperties: - "^REG[5-7]$": + "^REG([1-9]|1[0-2])$": type: object $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false - properties: - inl1-supply: - description: Handle to the INL1 input supply - - "^REG[8-9]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl2-supply: - description: Handle to the INL2 input supply - - "^REG1[0-2]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl3-supply: - description: Handle to the INL3 input supply - additionalProperties: false required: diff --git a/dts/Bindings/regulator/adi,max77857.yaml b/dts/Bindings/regulator/adi,max77857.yaml new file mode 100644 index 0000000000..d1fa74aca7 --- /dev/null +++ b/dts/Bindings/regulator/adi,max77857.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX77857 Buck-Boost Converter + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + - Okan Sahin <Okan.Sahin@analog.com> + +description: Analog Devices MAX77857 Buck-Boost Converter + +properties: + compatible: + enum: + - adi,max77831 + - adi,max77857 + - adi,max77859 + - adi,max77859a + + reg: + description: I2C address of the device + items: + - enum: [0x66, 0x67, 0x6E, 0x6F] + + interrupts: + maxItems: 1 + + adi,switch-frequency-hz: + description: Switching frequency of the Buck-Boost converter in Hz. + items: + - enum: [1200000, 1500000, 1800000, 2100000] + + adi,rtop-ohms: + description: Top feedback resistor value in ohms for external feedback. + minimum: 150000 + maximum: 330000 + + adi,rbot-ohms: + description: Bottom feedback resistor value in ohms for external feedback. + +dependencies: + adi,rtop-ohms: [ 'adi,rbot-ohms' ] + adi,rbot-ohms: [ 'adi,rtop-ohms' ] + +required: + - compatible + - reg + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,max77831 + + then: + properties: + adi,switch-frequency-hz: + items: + enum: [1200000, 1500000, 1800000] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@66 { + reg = <0x66>; + compatible = "adi,max77857"; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + adi,rtop-ohms = <312000>; + adi,rbot-ohms = <12000>; + }; + }; diff --git a/dts/Bindings/regulator/awinic,aw37503.yaml b/dts/Bindings/regulator/awinic,aw37503.yaml new file mode 100644 index 0000000000..c92a881ed6 --- /dev/null +++ b/dts/Bindings/regulator/awinic,aw37503.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li <like@awinic.com> + +description: + The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +required: + - compatible + - reg + - outp + - outn + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "awinic,aw37503"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + }; +... + diff --git a/dts/Bindings/regulator/dlg,da9121.yaml b/dts/Bindings/regulator/dlg,da9121.yaml index dc626517c2..13b3f75f8e 100644 --- a/dts/Bindings/regulator/dlg,da9121.yaml +++ b/dts/Bindings/regulator/dlg,da9121.yaml @@ -95,11 +95,6 @@ properties: Properties for a single BUCK regulator properties: - regulator-name: - pattern: "^BUCK([1-2])$" - description: | - BUCK2 present in DA9122, DA9220, DA9131, DA9132 only - regulator-initial-mode: enum: [ 0, 1, 2, 3 ] description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h @@ -122,6 +117,23 @@ required: - reg - regulators +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - dlg,da9122 + - dlg,da9131 + - dlg,da9132 + - dlg,da9220 + then: + properties: + regulators: + properties: + buck2: false + additionalProperties: false examples: diff --git a/dts/Bindings/regulator/dlg,slg51000.yaml b/dts/Bindings/regulator/dlg,slg51000.yaml new file mode 100644 index 0000000000..bad140418e --- /dev/null +++ b/dts/Bindings/regulator/dlg,slg51000.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor SLG51000 Voltage Regulator + +maintainers: + - Eric Jeong <eric.jeong.opensource@diasemi.com> + - Support Opensource <support.opensource@diasemi.com> + +properties: + compatible: + const: dlg,slg51000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,cs-gpios: + maxItems: 1 + description: + GPIO for chip select + + vin3-supply: + description: + Input supply for ldo3, required if regulator is enabled + + vin4-supply: + description: + Input supply for ldo4, required if regulator is enabled + + vin5-supply: + description: + Input supply for ldo5, required if regulator is enabled + + vin6-supply: + description: + Input supply for ldo6, required if regulator is enabled + + vin7-supply: + description: + Input supply for ldo7, required if regulator is enabled + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + + required: + - regulator-name + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9121-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_s1f_1p2>; + vin6-supply = <&vreg_s1f_1p2>; + + regulators { + ldo1 { + regulator-name = "slg51000_b_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "slg51000_b_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "slg51000_b_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "slg51000_b_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "slg51000_b_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "slg51000_b_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "slg51000_b_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; + }; diff --git a/dts/Bindings/regulator/mps,mp5416.yaml b/dts/Bindings/regulator/mps,mp5416.yaml index 2e720d1528..0221397eb5 100644 --- a/dts/Bindings/regulator/mps,mp5416.yaml +++ b/dts/Bindings/regulator/mps,mp5416.yaml @@ -29,10 +29,12 @@ properties: patternProperties: "^buck[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object "^ldo[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object additionalProperties: false diff --git a/dts/Bindings/regulator/mps,mpq7920.yaml b/dts/Bindings/regulator/mps,mpq7920.yaml index f3fcfc8be7..6de5b027f9 100644 --- a/dts/Bindings/regulator/mps,mpq7920.yaml +++ b/dts/Bindings/regulator/mps,mpq7920.yaml @@ -21,7 +21,6 @@ properties: regulators: type: object - $ref: regulator.yaml# description: | list of regulators provided by this controller, must be named @@ -39,11 +38,13 @@ properties: ldortc: type: object $ref: regulator.yaml# + unevaluatedProperties: false patternProperties: "^ldo[1-4]$": type: object $ref: regulator.yaml# + unevaluatedProperties: false "^buck[1-4]$": type: object diff --git a/dts/Bindings/regulator/pfuze100.yaml b/dts/Bindings/regulator/pfuze100.yaml index e384e4953f..0eda44752c 100644 --- a/dts/Bindings/regulator/pfuze100.yaml +++ b/dts/Bindings/regulator/pfuze100.yaml @@ -68,18 +68,22 @@ properties: "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vgen[1-6]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vldo[1-4]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: false diff --git a/dts/Bindings/regulator/qcom,rpm-regulator.yaml b/dts/Bindings/regulator/qcom,rpm-regulator.yaml index 8a08698e34..b4eb4001eb 100644 --- a/dts/Bindings/regulator/qcom,rpm-regulator.yaml +++ b/dts/Bindings/regulator/qcom,rpm-regulator.yaml @@ -49,7 +49,7 @@ patternProperties: ".*-supply$": description: Input supply phandle(s) for this node - "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$": + "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$": description: List of regulators and its properties $ref: regulator.yaml# unevaluatedProperties: false diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml index b9498504ad..127a6f39b7 100644 --- a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml +++ b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml @@ -53,6 +53,7 @@ description: | For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 + For PMX75, smps1 - smps10, ldo1 - ldo21 properties: compatible: @@ -84,13 +85,14 @@ properties: - qcom,pmr735a-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators + - qcom,pmx75-rpmh-regulators qcom,pmic-id: description: | RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, g, h, k] + enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] qcom,always-wait-for-ack: description: | @@ -109,6 +111,7 @@ properties: bob: type: object $ref: regulator.yaml# + unevaluatedProperties: false description: BOB regulator node. dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -117,6 +120,7 @@ patternProperties: "^(smps|ldo|lvs|bob)[0-9]+$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: smps/ldo regulator nodes(s). dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -424,10 +428,28 @@ allOf: vdd-l11-l13-supply: true patternProperties: "^vdd-l[1347]-supply$": true - "^vdd-l1[0245789]-supply$": true + "^vdd-l1[024579]-supply$": true "^vdd-l2[01]-supply$": true "^vdd-s[1-8]-supply$": true + - if: + properties: + compatible: + enum: + - qcom,pmx75-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l4-l16-supply: true + vdd-l5-l6-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + vdd-l20-l21-supply: true + patternProperties: + "^vdd-l[137]-supply$": true + "^vdd-l1[024579]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + unevaluatedProperties: false examples: diff --git a/dts/Bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/dts/Bindings/regulator/qcom,sdm845-refgen-regulator.yaml new file mode 100644 index 0000000000..f02f97d4fd --- /dev/null +++ b/dts/Bindings/regulator/qcom,sdm845-refgen-regulator.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. REFGEN Regulator + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The REFGEN (reference voltage generator) regulator provides reference + voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc7180-refgen-regulator + - qcom,sc8180x-refgen-regulator + - qcom,sm8150-refgen-regulator + - const: qcom,sdm845-refgen-regulator + + - items: + - enum: + - qcom,sc7280-refgen-regulator + - qcom,sc8280xp-refgen-regulator + - qcom,sm6350-refgen-regulator + - qcom,sm6375-refgen-regulator + - qcom,sm8350-refgen-regulator + - const: qcom,sm8250-refgen-regulator + + - enum: + - qcom,sdm845-refgen-regulator + - qcom,sm8250-refgen-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@162f000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0162f000 0x84>; + }; +... diff --git a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml index a8ca8e0b27..9ea8ac0786 100644 --- a/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/dts/Bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -110,6 +110,7 @@ patternProperties: "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": description: List of regulators and its properties $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/dts/Bindings/regulator/regulator-max77620.txt b/dts/Bindings/regulator/regulator-max77620.txt index 1c4bfe7867..bcf788897e 100644 --- a/dts/Bindings/regulator/regulator-max77620.txt +++ b/dts/Bindings/regulator/regulator-max77620.txt @@ -35,7 +35,7 @@ information for that regulator. The definition for each of these nodes is defined using the standard binding for regulators found at <Documentation/devicetree/bindings/regulator/regulator.txt>. -Theres are also additional properties for SD/LDOs. These additional properties +There are also additional properties for SD/LDOs. These additional properties are required to configure FPS configuration parameters for SDs and LDOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml index e158c2d3d3..9daf0fc246 100644 --- a/dts/Bindings/regulator/regulator.yaml +++ b/dts/Bindings/regulator/regulator.yaml @@ -126,7 +126,7 @@ properties: regulator-oc-error-microamp: description: Set over current error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested. + the hardware probably is malfunctional and damage prevention is requested. Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. @@ -146,7 +146,7 @@ properties: regulator-ov-error-microvolt: description: Set over voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -168,7 +168,7 @@ properties: regulator-uv-error-microvolt: description: Set under voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -189,7 +189,7 @@ properties: regulator-temp-error-kelvin: description: Set over temperature error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. diff --git a/dts/Bindings/regulator/richtek,rt4831-regulator.yaml b/dts/Bindings/regulator/richtek,rt4831-regulator.yaml index d9c23333e1..cd06e957b9 100644 --- a/dts/Bindings/regulator/richtek,rt4831-regulator.yaml +++ b/dts/Bindings/regulator/richtek,rt4831-regulator.yaml @@ -29,6 +29,7 @@ patternProperties: "^DSV(LCM|P|N)$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: Properties for single Display Bias Voltage regulator. diff --git a/dts/Bindings/regulator/richtek,rt5190a-regulator.yaml b/dts/Bindings/regulator/richtek,rt5190a-regulator.yaml index edb411be03..89341fdaa3 100644 --- a/dts/Bindings/regulator/richtek,rt5190a-regulator.yaml +++ b/dts/Bindings/regulator/richtek,rt5190a-regulator.yaml @@ -11,7 +11,7 @@ maintainers: description: | The RT5190A integrates 1 channel buck controller, 3 channels high efficiency - synchronous buck converters, 1 LDO, I2C control interface and peripherial + synchronous buck converters, 1 LDO, I2C control interface and peripheral logical control. It also supports mute AC OFF depop sound and quick setting storage while diff --git a/dts/Bindings/regulator/richtek,rt5739.yaml b/dts/Bindings/regulator/richtek,rt5739.yaml index 358297dd3f..e95e046e9e 100644 --- a/dts/Bindings/regulator/richtek,rt5739.yaml +++ b/dts/Bindings/regulator/richtek,rt5739.yaml @@ -21,6 +21,7 @@ allOf: properties: compatible: enum: + - richtek,rt5733 - richtek,rt5739 reg: diff --git a/dts/Bindings/regulator/richtek,rtmv20-regulator.yaml b/dts/Bindings/regulator/richtek,rtmv20-regulator.yaml index 446ec5127d..fec3d396ca 100644 --- a/dts/Bindings/regulator/richtek,rtmv20-regulator.yaml +++ b/dts/Bindings/regulator/richtek,rtmv20-regulator.yaml @@ -121,6 +121,7 @@ properties: description: load switch current regulator description. type: object $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/regulator/richtek,rtq2208.yaml b/dts/Bindings/regulator/richtek,rtq2208.yaml new file mode 100644 index 0000000000..609c06615b --- /dev/null +++ b/dts/Bindings/regulator/richtek,rtq2208.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2208 SubPMIC Regulator + +maintainers: + - Alina Yu <alina_yu@richtek.com> + +description: | + RTQ2208 is a highly integrated power converter that offers functional safety dual + multi-configurable synchronous buck converters and two LDOs. + + Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted + switching operation in normal mode; the latter defines the operation in suspend to RAM mode. + + No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching + operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous + conduction mode (FCCM). + + The definition of modes is in the datasheet which is available in below link + and their meaning is:: + 0 - Auto mode for power saving, which reducing the switching frequency at light load condition + to maintain high frequency. + 1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency. + + Datasheet will be available soon at + https://www.richtek.com/assets/Products + +properties: + compatible: + enum: + - richtek,rtq2208 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,mtp-sel-high: + type: boolean + description: + vout register selection based on this boolean value. + false - Using DVS0 register setting to adjust vout + true - Using DVS1 register setting to adjust vout + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^buck-[a-h]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + description for buck-[a-h] regulator. + + properties: + regulator-allowed-modes: + description: + two buck modes in different switching accuracy. + 0 - Auto mode + 1 - FCCM + items: + enum: [0, 1] + + "^ldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + regulator description for ldo[1-2]. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@10 { + compatible = "richtek,rtq2208"; + reg = <0x10>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + richtek,mtp-sel-high; + + regulators { + buck-a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-c { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-d { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-e { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-f { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-g { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-h { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml b/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml index e6e5a9a7d9..ef62c618de 100644 --- a/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml +++ b/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml @@ -35,6 +35,7 @@ properties: "^(p|n)avdd$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: | regulator description for pavdd and navdd. diff --git a/dts/Bindings/regulator/slg51000.txt b/dts/Bindings/regulator/slg51000.txt deleted file mode 100644 index aa0733e49b..0000000000 --- a/dts/Bindings/regulator/slg51000.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Dialog Semiconductor SLG51000 Voltage Regulator - -Required properties: -- compatible : Should be "dlg,slg51000" for SLG51000 -- reg : Specifies the I2C slave address. -- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. - These entries are required if regulators are enabled for a device. - An absence of these properties can cause the regulator registration to fail. - If some of input supply is powered through battery or always-on supply then - also it is required to have these parameters with proper node handle of always - on power supply. - vin3-supply: Input supply for ldo3 - vin4-supply: Input supply for ldo4 - vin5-supply: Input supply for ldo5 - vin6-supply: Input supply for ldo6 - vin7-supply: Input supply for ldo7 - -Optional properties: -- interrupt-parent : Specifies the reference to the interrupt controller. -- interrupts : IRQ line information. -- dlg,cs-gpios : Specify a valid GPIO for chip select - -Sub-nodes: -- regulators : This node defines the settings for the regulators. - The content of the sub-node is defined by the standard binding - for regulators; see regulator.txt. - - The SLG51000 regulators are bound using their names listed below: - ldo1 - ldo2 - ldo3 - ldo4 - ldo5 - ldo6 - ldo7 - -Optional properties for regulators: -- enable-gpios : Specify a valid GPIO for platform control of the regulator. - -Example: - pmic: slg51000@75 { - compatible = "dlg,slg51000"; - reg = <0x75>; - - regulators { - ldo1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo7 { - regulator-name = "ldo7"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - }; - }; diff --git a/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml b/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml index 7d53cfa2c2..c9586d277f 100644 --- a/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -25,8 +25,8 @@ properties: patternProperties: "^(reg11|reg18|usb33)$": type: object - $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/regulator/vctrl.txt b/dts/Bindings/regulator/vctrl.txt index 601328d7fd..e940377cfd 100644 --- a/dts/Bindings/regulator/vctrl.txt +++ b/dts/Bindings/regulator/vctrl.txt @@ -21,7 +21,7 @@ Optional properties: margin from the expected value for a given control voltage. On larger voltage decreases this can occur undesiredly since the output voltage does not adjust - inmediately to changes in the control voltage. To + immediately to changes in the control voltage. To avoid this situation the vctrl driver breaks down larger voltage decreases into multiple steps, where each step is within the OVP threshold. diff --git a/dts/Bindings/regulator/wlf,arizona.yaml b/dts/Bindings/regulator/wlf,arizona.yaml index 011819c109..11e378648b 100644 --- a/dts/Bindings/regulator/wlf,arizona.yaml +++ b/dts/Bindings/regulator/wlf,arizona.yaml @@ -29,11 +29,13 @@ properties: Initial data for the LDO1 regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false micvdd: description: Initial data for the MICVDD regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: true diff --git a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml index 0c3910f152..30632efdad 100644 --- a/dts/Bindings/remoteproc/fsl,imx-rproc.yaml +++ b/dts/Bindings/remoteproc/fsl,imx-rproc.yaml @@ -20,7 +20,9 @@ properties: - fsl,imx7ulp-cm4 - fsl,imx8mm-cm4 - fsl,imx8mn-cm7 + - fsl,imx8mn-cm7-mmio - fsl,imx8mp-cm7 + - fsl,imx8mp-cm7-mmio - fsl,imx8mq-cm4 - fsl,imx8qm-cm4 - fsl,imx8qxp-cm4 @@ -70,6 +72,11 @@ properties: description: Specify CPU entry address for SCU enabled processor. + fsl,iomuxc-gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to IOMUXC GPR block which provide access to CM7 CPUWAIT bit. + fsl,resource-id: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -79,6 +86,19 @@ properties: required: - compatible +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx8mn-cm7-mmio + - fsl,imx8mp-cm7-mmio + then: + properties: + fsl,iomuxc-gpr: false + additionalProperties: false examples: diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml index 643ee787a8..a2b0079de0 100644 --- a/dts/Bindings/remoteproc/qcom,adsp.yaml +++ b/dts/Bindings/remoteproc/qcom,adsp.yaml @@ -26,6 +26,7 @@ properties: - qcom,sdm660-adsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas + - qcom,sdm845-slpi-pas reg: maxItems: 1 @@ -44,8 +45,13 @@ properties: maxItems: 1 description: Reference to the reserved-memory for the Hexagon core + firmware-name: + maxItems: 1 + description: Firmware name for the Hexagon core + required: - compatible + - memory-region unevaluatedProperties: false @@ -63,6 +69,7 @@ allOf: - qcom,msm8998-adsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas + - qcom,sdm845-slpi-pas then: properties: clocks: @@ -104,6 +111,7 @@ allOf: - qcom,msm8998-slpi-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas + - qcom,sdm845-slpi-pas then: properties: interrupts: @@ -160,6 +168,22 @@ allOf: - if: properties: compatible: + enum: + - qcom,sdm845-slpi-pas + then: + properties: + power-domains: + items: + - description: LCX power domain + - description: LMX power domain + power-domain-names: + items: + - const: lcx + - const: lmx + + - if: + properties: + compatible: contains: enum: - qcom,msm8226-adsp-pil diff --git a/dts/Bindings/remoteproc/qcom,glink-edge.yaml b/dts/Bindings/remoteproc/qcom,glink-edge.yaml index 7b43ad3daa..e78a89c9ec 100644 --- a/dts/Bindings/remoteproc/qcom,glink-edge.yaml +++ b/dts/Bindings/remoteproc/qcom,glink-edge.yaml @@ -14,9 +14,6 @@ description: related to the remote processor. properties: - $nodename: - const: glink-edge - apr: $ref: /schemas/soc/qcom/qcom,apr.yaml# required: diff --git a/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml b/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml index f5a044e20c..884158bccd 100644 --- a/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/dts/Bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -84,7 +84,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - rpm-glink { + glink-edge { compatible = "qcom,glink-rpm"; interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; mboxes = <&apcs_glb 0>; diff --git a/dts/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/dts/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml index c1ac6ca1e7..0643faae2c 100644 --- a/dts/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml +++ b/dts/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml @@ -19,6 +19,7 @@ properties: enum: - qcom,msm8996-mss-pil - qcom,msm8998-mss-pil + - qcom,sdm660-mss-pil - qcom,sdm845-mss-pil reg: @@ -215,13 +216,12 @@ allOf: - description: GCC MSS IFACE clock - description: GCC MSS BUS clock - description: GCC MSS MEM clock - - description: RPMH XO clock + - description: RPM XO clock - description: GCC MSS GPLL0 clock - description: GCC MSS SNOC_AXI clock - description: GCC MSS MNOC_AXI clock - - description: RPMH PNOC clock - - description: GCC MSS PRNG clock - - description: RPMH QDSS clock + - description: RPM PNOC clock + - description: RPM QDSS clock clock-names: items: - const: iface @@ -245,7 +245,9 @@ allOf: - if: properties: compatible: - const: qcom,msm8998-mss-pil + enum: + - qcom,msm8998-mss-pil + - qcom,sdm660-mss-pil then: properties: clocks: diff --git a/dts/Bindings/remoteproc/qcom,pas-common.yaml b/dts/Bindings/remoteproc/qcom,pas-common.yaml index 171ef85de1..63a82e7a8b 100644 --- a/dts/Bindings/remoteproc/qcom,pas-common.yaml +++ b/dts/Bindings/remoteproc/qcom,pas-common.yaml @@ -82,7 +82,6 @@ required: - clock-names - interrupts - interrupt-names - - memory-region - qcom,smem-states - qcom,smem-state-names diff --git a/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml b/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml index 5efa0e5c04..eb868a7ff4 100644 --- a/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,qcs404-pas.yaml @@ -42,7 +42,7 @@ properties: smd-edge: false memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core firmware-name: @@ -52,6 +52,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,rpm-proc.yaml b/dts/Bindings/remoteproc/qcom,rpm-proc.yaml new file mode 100644 index 0000000000..7afafde17a --- /dev/null +++ b/dts/Bindings/remoteproc/qcom,rpm-proc.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konrad.dybcio@linaro.org> + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Resource Power Manager (RPM) subsystem found in various Qualcomm platforms: + + +--------------------------------------------+ + | RPM subsystem (qcom,rpm-proc) | + | | + reset | +---------------+ +-----+ +-----+ | + --------->| | | MPM | | CPR | ... | + IPC interrupts | | ARM Cortex-M3 |--- +-----+ +-----+ | + ----------------->| | | | | | + | +---------------+ |---------------------- | + | +---------------+ | | + | | Code RAM |--| +------------------+ | + | +---------------+ | | | | + | +---------------+ |--| Message RAM | | + | | Data RAM |--| | | | + | +---------------+ | +------------------+ | + +--------------------|-----------------------+ + v + NoC + + The firmware running on the processor inside the RPM subsystem allows each + component in the system to vote for state of the system resources, such as + clocks, regulators and bus frequencies. It implements multiple separate + communication interfaces that are described in subnodes, e.g. SMD and MPM: + + +------------------------------+ + | ARM Cortex-M3 | + | | +------------------------------+ + | +--------------------------+ | | Message RAM | + | | RPM firmware | | | | + IPC IRQ 0 | | +----------------------+ | | | +--------------------------+ | + -------------->| SMD server |<------->| SMD data structures | | + | | | +--------------+ | | | | | +--------------+ | | + | | | | rpm_requests | ... | | | | | | rpm_requests | ... | | + | | | +--------------+ | | | | | +--------------+ | | + IPC IRQ 1 | | +----------------------+ | | | +--------------------------+ | + -------------->| MPM virtualization |<--------| MPM register copy (vMPM) | | + | | +----------------------+ | | | +--------------------------+ | + | | ... | | | | ... | + | +--------------------|-----+ | +------------------------------+ + +----------------------|-------+ + v + +--------------+ + | MPM Hardware | + +--------------+ + + The services provided by the firmware are only available after the firmware + has been loaded and the processor has been released from reset. Usually this + happens early in the boot process before the operating system is started. + +properties: + compatible: + items: + - enum: + - qcom,apq8084-rpm-proc + - qcom,ipq6018-rpm-proc + - qcom,ipq9574-rpm-proc + - qcom,mdm9607-rpm-proc + - qcom,msm8226-rpm-proc + - qcom,msm8610-rpm-proc + - qcom,msm8909-rpm-proc + - qcom,msm8916-rpm-proc + - qcom,msm8917-rpm-proc + - qcom,msm8936-rpm-proc + - qcom,msm8937-rpm-proc + - qcom,msm8952-rpm-proc + - qcom,msm8953-rpm-proc + - qcom,msm8974-rpm-proc + - qcom,msm8976-rpm-proc + - qcom,msm8994-rpm-proc + - qcom,msm8996-rpm-proc + - qcom,msm8998-rpm-proc + - qcom,qcm2290-rpm-proc + - qcom,qcs404-rpm-proc + - qcom,sdm660-rpm-proc + - qcom,sm6115-rpm-proc + - qcom,sm6125-rpm-proc + - qcom,sm6375-rpm-proc + - const: qcom,rpm-proc + + smd-edge: + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + description: + Qualcomm Shared Memory subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + glink-edge: + $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml# + description: + Qualcomm G-Link subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + interrupt-controller: + type: object + $ref: /schemas/interrupt-controller/qcom,mpm.yaml# + description: + MSM Power Manager (MPM) interrupt controller that monitors interrupts + when the system is asleep. + + master-stats: + $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml# + description: + Subsystem-level low-power mode statistics provided by RPM. + +required: + - compatible + +oneOf: + - required: + - smd-edge + - required: + - glink-edge + +additionalProperties: false + +examples: + # SMD + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + /* ... */ + }; + }; + }; + # GLINK + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + /* ... */ + }; + }; + }; diff --git a/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml b/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml index 5cefd2c585..689d5d5353 100644 --- a/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sc7180-pas.yaml @@ -51,7 +51,7 @@ properties: - const: mss memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core qcom,qmp: @@ -67,6 +67,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml b/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml index c1f8dd8d0e..4744a37b2b 100644 --- a/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sc8180x-pas.yaml @@ -38,7 +38,7 @@ properties: smd-edge: false memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core firmware-name: @@ -48,6 +48,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sc8280xp-pas.yaml b/dts/Bindings/remoteproc/qcom,sc8280xp-pas.yaml index f6fbc531dc..96d53baf6e 100644 --- a/dts/Bindings/remoteproc/qcom,sc8280xp-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sc8280xp-pas.yaml @@ -38,7 +38,7 @@ properties: smd-edge: false memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core firmware-name: @@ -48,6 +48,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sdx55-pas.yaml b/dts/Bindings/remoteproc/qcom,sdx55-pas.yaml index c66e298462..5d46327216 100644 --- a/dts/Bindings/remoteproc/qcom,sdx55-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sdx55-pas.yaml @@ -46,7 +46,7 @@ properties: - const: mss memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core qcom,qmp: @@ -62,6 +62,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml b/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml index f5d1fa9f45..0282872359 100644 --- a/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm6115-pas.yaml @@ -15,10 +15,19 @@ description: properties: compatible: - enum: - - qcom,sm6115-adsp-pas - - qcom,sm6115-cdsp-pas - - qcom,sm6115-mpss-pas + oneOf: + - enum: + - qcom,sm6115-adsp-pas + - qcom,sm6115-cdsp-pas + - qcom,sm6115-mpss-pas + + - items: + - const: qcom,qcm2290-adsp-pas + - const: qcom,sm6115-adsp-pas + + - items: + - const: qcom,qcm2290-mpss-pas + - const: qcom,sm6115-mpss-pas reg: maxItems: 1 @@ -32,7 +41,7 @@ properties: - const: xo memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core smd-edge: false @@ -44,15 +53,17 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# - if: properties: compatible: - enum: - - qcom,sm6115-adsp-pas - - qcom,sm6115-cdsp-pas + contains: + enum: + - qcom,sm6115-adsp-pas + - qcom,sm6115-cdsp-pas then: properties: interrupts: @@ -69,9 +80,10 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm6115-cdsp-pas - - qcom,sm6115-mpss-pas + contains: + enum: + - qcom,sm6115-cdsp-pas + - qcom,sm6115-mpss-pas then: properties: power-domains: @@ -84,8 +96,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm6115-adsp-pas + contains: + enum: + - qcom,sm6115-adsp-pas then: properties: power-domains: diff --git a/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml b/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml index fee02fa800..f7e40fb166 100644 --- a/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm6350-pas.yaml @@ -36,7 +36,7 @@ properties: description: Reference to the AOSS side-channel message RAM. memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core smd-edge: false @@ -48,6 +48,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml index 2c085ac2c3..238c6e5e67 100644 --- a/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8150-pas.yaml @@ -40,7 +40,7 @@ properties: description: Reference to the AOSS side-channel message RAM. memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core smd-edge: false @@ -52,6 +52,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml index af24f9a3cd..53cea8e53a 100644 --- a/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8350-pas.yaml @@ -43,7 +43,7 @@ properties: smd-edge: false memory-region: - minItems: 1 + maxItems: 1 description: Reference to the reserved-memory for the Hexagon core firmware-name: @@ -53,6 +53,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# @@ -139,7 +140,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/mailbox/qcom-ipcc.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> remoteproc@30000000 { compatible = "qcom,sm8450-adsp-pas"; @@ -160,8 +161,8 @@ examples: memory-region = <&adsp_mem>; - power-domains = <&rpmhpd SM8450_LCX>, - <&rpmhpd SM8450_LMX>; + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; power-domain-names = "lcx", "lmx"; qcom,qmp = <&aoss_qmp>; diff --git a/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml b/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml index fe216aa531..58120829fb 100644 --- a/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/dts/Bindings/remoteproc/qcom,sm8550-pas.yaml @@ -53,6 +53,7 @@ properties: required: - compatible - reg + - memory-region allOf: - $ref: /schemas/remoteproc/qcom,pas-common.yaml# diff --git a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml index f16e90380d..9768db8663 100644 --- a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml# diff --git a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml index fcc3db97fe..a492f74a86 100644 --- a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml# @@ -102,7 +102,7 @@ patternProperties: caches. Each of the TCMs can be enabled or disabled independently and either of them can be configured to appear at that R5F's address 0x0. - The cores do not use an MMU, but has a Region Address Translater + The cores do not use an MMU, but has a Region Address Translator (RAT) module that is accessible only from the R5Fs for providing translations between 32-bit CPU addresses into larger system bus addresses. Cache and memory access settings are provided through a diff --git a/dts/Bindings/remoteproc/ti,omap-remoteproc.yaml b/dts/Bindings/remoteproc/ti,omap-remoteproc.yaml index 1fdc2741c3..94eb2033e7 100644 --- a/dts/Bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/dts/Bindings/remoteproc/ti,omap-remoteproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# diff --git a/dts/Bindings/remoteproc/ti,pru-consumer.yaml b/dts/Bindings/remoteproc/ti,pru-consumer.yaml index 35f0bb38f7..2811334515 100644 --- a/dts/Bindings/remoteproc/ti,pru-consumer.yaml +++ b/dts/Bindings/remoteproc/ti,pru-consumer.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# diff --git a/dts/Bindings/remoteproc/ti,pru-rproc.yaml b/dts/Bindings/remoteproc/ti,pru-rproc.yaml index cd55d80137..baccd98754 100644 --- a/dts/Bindings/remoteproc/ti,pru-rproc.yaml +++ b/dts/Bindings/remoteproc/ti,pru-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-rproc.yaml# diff --git a/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml index 9f677367dd..78aac69f10 100644 --- a/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml +++ b/dts/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml# diff --git a/dts/Bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml b/dts/Bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml new file mode 100644 index 0000000000..f9b2f0fdc2 --- /dev/null +++ b/dts/Bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra CPU-NS - BPMP IPC reserved memory + +maintainers: + - Peter De Schrijver <pdeschrijver@nvidia.com> + +description: | + Define a memory region used for communication between CPU-NS and BPMP. + Typically this node is created by the bootloader as the physical address + has to be known to both CPU-NS and BPMP for correct IPC operation. + The memory region is defined using a child node under /reserved-memory. + The sub-node is named shmem@<address>. + +allOf: + - $ref: reserved-memory.yaml + +properties: + compatible: + const: nvidia,tegra264-bpmp-shmem + + reg: + description: The physical address and size of the shared SDRAM region + +unevaluatedProperties: false + +required: + - compatible + - reg + - no-map + +examples: + - | + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + dram_cpu_bpmp_mail: shmem@f1be0000 { + compatible = "nvidia,tegra264-bpmp-shmem"; + reg = <0x0 0xf1be0000 0x0 0x2000>; + no-map; + }; + }; +... diff --git a/dts/Bindings/reset/altr,rst-mgr.yaml b/dts/Bindings/reset/altr,rst-mgr.yaml index 4379cec6b3..761c70cf9d 100644 --- a/dts/Bindings/reset/altr,rst-mgr.yaml +++ b/dts/Bindings/reset/altr,rst-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera SOCFPGA Reset Manager maintainers: - - Dinh Nguyen <dinguyen@altera.com> + - Dinh Nguyen <dinguyen@kernel.org> properties: compatible: @@ -32,9 +32,17 @@ properties: required: - compatible - reg - - altr,modrst-offset - '#reset-cells' +if: + properties: + compatible: + contains: + const: altr,stratix10-rst-mgr +then: + properties: + altr,modrst-offset: false + additionalProperties: false examples: diff --git a/dts/Bindings/reset/ti,sci-reset.yaml b/dts/Bindings/reset/ti,sci-reset.yaml index dcf9206e12..e10eb98edd 100644 --- a/dts/Bindings/reset/ti,sci-reset.yaml +++ b/dts/Bindings/reset/ti,sci-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml# diff --git a/dts/Bindings/reset/ti,tps380x-reset.yaml b/dts/Bindings/reset/ti,tps380x-reset.yaml index f436f2cf1d..6063784f03 100644 --- a/dts/Bindings/reset/ti,tps380x-reset.yaml +++ b/dts/Bindings/reset/ti,tps380x-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml# diff --git a/dts/Bindings/reset/ti-syscon-reset.txt b/dts/Bindings/reset/ti-syscon-reset.txt index 86945502cc..61a0ff33e8 100644 --- a/dts/Bindings/reset/ti-syscon-reset.txt +++ b/dts/Bindings/reset/ti-syscon-reset.txt @@ -43,7 +43,7 @@ Required properties: Cell #6 : bit position of the reset in the reset status register Cell #7 : Flags used to control reset behavior, - availible flags defined in the DT include + available flags defined in the DT include file <dt-bindings/reset/ti-syscon.h> SysCon Reset Consumer Nodes diff --git a/dts/Bindings/reset/xlnx,zynqmp-reset.yaml b/dts/Bindings/reset/xlnx,zynqmp-reset.yaml index 0d50f6a54a..49db668014 100644 --- a/dts/Bindings/reset/xlnx,zynqmp-reset.yaml +++ b/dts/Bindings/reset/xlnx,zynqmp-reset.yaml @@ -32,6 +32,7 @@ properties: enum: - xlnx,zynqmp-reset - xlnx,versal-reset + - xlnx,versal-net-reset "#reset-cells": const: 1 diff --git a/dts/Bindings/riscv/thead.yaml b/dts/Bindings/riscv/thead.yaml index e62f682137..301912dcd2 100644 --- a/dts/Bindings/riscv/thead.yaml +++ b/dts/Bindings/riscv/thead.yaml @@ -17,6 +17,10 @@ properties: const: '/' compatible: oneOf: + - description: BeagleV Ahead single board computer + items: + - const: beagle,beaglev-ahead + - const: thead,th1520 - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A items: - enum: diff --git a/dts/Bindings/rng/omap_rng.yaml b/dts/Bindings/rng/omap_rng.yaml index ccf54fae83..c0ac4f68ea 100644 --- a/dts/Bindings/rng/omap_rng.yaml +++ b/dts/Bindings/rng/omap_rng.yaml @@ -30,8 +30,8 @@ properties: clocks: minItems: 1 items: - - description: EIP150 gatable clock - - description: Main gatable clock + - description: EIP150 gateable clock + - description: Main gateable clock clock-names: minItems: 1 diff --git a/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml b/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml index 4d2bef15fb..c8bb2eef44 100644 --- a/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml +++ b/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml @@ -14,13 +14,17 @@ maintainers: properties: compatible: - enum: - - atmel,at91rm9200-rtc - - atmel,at91sam9x5-rtc - - atmel,sama5d4-rtc - - atmel,sama5d2-rtc - - microchip,sam9x60-rtc - - microchip,sama7g5-rtc + oneOf: + - enum: + - atmel,at91rm9200-rtc + - atmel,at91sam9x5-rtc + - atmel,sama5d4-rtc + - atmel,sama5d2-rtc + - microchip,sam9x60-rtc + - microchip,sama7g5-rtc + - items: + - const: microchip,sam9x7-rtc + - const: microchip,sam9x60-rtc reg: maxItems: 1 diff --git a/dts/Bindings/rtc/intersil,isl12022.yaml b/dts/Bindings/rtc/intersil,isl12022.yaml new file mode 100644 index 0000000000..c2d1441ef2 --- /dev/null +++ b/dts/Bindings/rtc/intersil,isl12022.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/intersil,isl12022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL12022 Real-time Clock + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + const: isil,isl12022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 0 + + isil,battery-trip-levels-microvolt: + description: + The battery voltages at which the first alarm and second alarm + should trigger (normally ~85% and ~75% of nominal V_BAT). + items: + - enum: [2125000, 2295000, 2550000, 2805000, 3060000, 4250000, 4675000] + - enum: [1875000, 2025000, 2250000, 2475000, 2700000, 3750000, 4125000] + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + # If #clock-cells is present, interrupts must not be present + - if: + required: + - '#clock-cells' + then: + properties: + interrupts: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "isil,isl12022"; + reg = <0x6f>; + interrupts-extended = <&gpio1 5 IRQ_TYPE_LEVEL_LOW>; + isil,battery-trip-levels-microvolt = <2550000>, <2250000>; + }; + }; + +... diff --git a/dts/Bindings/rtc/maxim,ds3231.txt b/dts/Bindings/rtc/maxim,ds3231.txt deleted file mode 100644 index 85be53a421..0000000000 --- a/dts/Bindings/rtc/maxim,ds3231.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Maxim DS3231 Real Time Clock - -Required properties: -- compatible: Should contain "maxim,ds3231". -- reg: I2C address for chip. - -Optional property: -- #clock-cells: Should be 1. -- clock-output-names: - overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz". - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Following indices are allowed: - - 0: square-wave output on the SQW pin - - 1: square-wave output on the 32kHz pin - -- interrupts: rtc alarm/event interrupt. When this property is selected, - clock on the SQW pin cannot be used. - -Example: - -ds3231: ds3231@51 { - compatible = "maxim,ds3231"; - reg = <0x68>; - #clock-cells = <1>; -}; - -device1 { -... - clocks = <&ds3231 0>; -... -}; - -device2 { -... - clocks = <&ds3231 1>; -... -}; diff --git a/dts/Bindings/rtc/nxp,pcf2127.yaml b/dts/Bindings/rtc/nxp,pcf2127.yaml index bcb2300276..2d9fe5a75b 100644 --- a/dts/Bindings/rtc/nxp,pcf2127.yaml +++ b/dts/Bindings/rtc/nxp,pcf2127.yaml @@ -18,6 +18,7 @@ properties: - nxp,pca2129 - nxp,pcf2127 - nxp,pcf2129 + - nxp,pcf2131 reg: maxItems: 1 diff --git a/dts/Bindings/rtc/rtc-cmos.txt b/dts/Bindings/rtc/rtc-cmos.txt index b94b35f360..7d7b5f6bda 100644 --- a/dts/Bindings/rtc/rtc-cmos.txt +++ b/dts/Bindings/rtc/rtc-cmos.txt @@ -10,7 +10,7 @@ Optional properties: - ctrl-reg : Contains the initial value of the control register also called "Register B". - freq-reg : Contains the initial value of the frequency register also - called "Regsiter A". + called "Register A". "Register A" and "B" are usually initialized by the firmware (BIOS for instance). If this is not done, it can be performed by the driver. diff --git a/dts/Bindings/rtc/st,m48t86.yaml b/dts/Bindings/rtc/st,m48t86.yaml new file mode 100644 index 0000000000..e3e12fa233 --- /dev/null +++ b/dts/Bindings/rtc/st,m48t86.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/st,m48t86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST M48T86 / Dallas DS12887 RTC with SRAM + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: rtc.yaml + +properties: + compatible: + enum: + - st,m48t86 + + reg: + items: + - description: index register + - description: data register + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + rtc@10800000 { + compatible = "st,m48t86"; + reg = <0x10800000 0x1>, <0x11700000 0x1>; + }; + +... diff --git a/dts/Bindings/rtc/trivial-rtc.yaml b/dts/Bindings/rtc/trivial-rtc.yaml index 9af77f21bb..2a65f31ac5 100644 --- a/dts/Bindings/rtc/trivial-rtc.yaml +++ b/dts/Bindings/rtc/trivial-rtc.yaml @@ -45,8 +45,6 @@ properties: - isil,isl1208 # Intersil ISL1218 Low Power RTC with Battery Backed SRAM - isil,isl1218 - # Intersil ISL12022 Real-time Clock - - isil,isl12022 # Real Time Clock Module with I2C-Bus - microcrystal,rv3029 # Real Time Clock diff --git a/dts/Bindings/serial/amlogic,meson-uart.yaml b/dts/Bindings/serial/amlogic,meson-uart.yaml index 01ec45b3b4..2e189e5483 100644 --- a/dts/Bindings/serial/amlogic,meson-uart.yaml +++ b/dts/Bindings/serial/amlogic,meson-uart.yaml @@ -33,6 +33,7 @@ properties: - amlogic,meson8b-uart - amlogic,meson-gx-uart - amlogic,meson-s4-uart + - amlogic,meson-a1-uart - const: amlogic,meson-ao-uart - description: Always-on power domain UART controller on G12A SoCs items: @@ -46,10 +47,15 @@ properties: - amlogic,meson8b-uart - amlogic,meson-gx-uart - amlogic,meson-s4-uart + - amlogic,meson-a1-uart - description: Everything-Else power domain UART controller on G12A SoCs items: - const: amlogic,meson-g12a-uart - const: amlogic,meson-gx-uart + - description: UART controller on S4 compatible SoCs + items: + - const: amlogic,t7-uart + - const: amlogic,meson-s4-uart reg: maxItems: 1 diff --git a/dts/Bindings/serial/fsl-lpuart.yaml b/dts/Bindings/serial/fsl-lpuart.yaml index 9306240327..3a5b59f5d3 100644 --- a/dts/Bindings/serial/fsl-lpuart.yaml +++ b/dts/Bindings/serial/fsl-lpuart.yaml @@ -25,11 +25,15 @@ properties: - fsl,imxrt1050-lpuart - items: - enum: - - fsl,imx93-lpuart - fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: - enum: + - fsl,imx93-lpuart + - const: fsl,imx8ulp-lpuart + - const: fsl,imx7ulp-lpuart + - items: + - enum: - fsl,imx8qm-lpuart - fsl,imx8dxl-lpuart - const: fsl,imx8qxp-lpuart diff --git a/dts/Bindings/serial/nvidia,tegra20-hsuart.txt b/dts/Bindings/serial/nvidia,tegra20-hsuart.txt deleted file mode 100644 index f709304036..0000000000 --- a/dts/Bindings/serial/nvidia,tegra20-hsuart.txt +++ /dev/null @@ -1,73 +0,0 @@ -NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver. - -Required properties: -- compatible : should be, - "nvidia,tegra20-hsuart" for Tegra20, - "nvidia,tegra30-hsuart" for Tegra30, - "nvidia,tegra186-hsuart" for Tegra186, - "nvidia,tegra194-hsuart" for Tegra194. - -- reg: Should contain UART controller registers location and length. -- interrupts: Should contain UART controller interrupts. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - serial -- dmas : Must contain an entry for each entry in dma-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Optional properties: -- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable - only if all 8 lines of UART controller are pinmuxed. -- nvidia,adjust-baud-rates: List of entries providing percentage of baud rate - adjustment within a range. - Each entry contains sets of 3 values. Range low/high and adjusted rate. - <range_low range_high adjusted_rate> - When baud rate set on controller falls within the range mentioned in this - field, baud rate will be adjusted by percentage mentioned here. - Ex: <9600 115200 200> - Increase baud rate by 2% when set baud rate falls within range 9600 to 115200 - -Baud Rate tolerance: - Standard UART devices are expected to have tolerance for baud rate error by - -4 to +4 %. All Tegra devices till Tegra210 had this support. However, - Tegra186 chip has a known hardware issue. UART Rx baud rate tolerance level - is 0% to +4% in 1-stop config. Otherwise, the received data will have - corruption/invalid framing errors. Parker errata suggests adjusting baud - rate to be higher than the deviations observed in Tx. - - Tx deviation of connected device can be captured over scope (or noted from - its spec) for valid range and Tegra baud rate has to be set above actual - Tx baud rate observed. To do this we use nvidia,adjust-baud-rates - - As an example, consider there is deviation observed in Tx for baud rates as - listed below. - 0 to 9600 has 1% deviation - 9600 to 115200 2% deviation - This slight deviation is expcted and Tegra UART is expected to handle it. Due - to the issue stated above, baud rate on Tegra UART should be set equal to or - above deviation observed for avoiding frame errors. - Property should be set like this - nvidia,adjust-baud-rates = <0 9600 100>, - <9600 115200 200>; - -Example: - -serial@70006000 { - compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart"; - reg = <0x70006000 0x40>; - reg-shift = <2>; - interrupts = <0 36 0x04>; - nvidia,enable-modem-interrupt; - clocks = <&tegra_car 6>; - resets = <&tegra_car 6>; - reset-names = "serial"; - dmas = <&apbdma 8>, <&apbdma 8>; - dma-names = "rx", "tx"; - nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */ -}; diff --git a/dts/Bindings/serial/nvidia,tegra20-hsuart.yaml b/dts/Bindings/serial/nvidia,tegra20-hsuart.yaml new file mode 100644 index 0000000000..04d55fecf4 --- /dev/null +++ b/dts/Bindings/serial/nvidia,tegra20-hsuart.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/nvidia,tegra20-hsuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-hsuart + - nvidia,tegra30-hsuart + - nvidia,tegra186-hsuart + - nvidia,tegra194-hsuart + - items: + - const: nvidia,tegra124-hsuart + - const: nvidia,tegra30-hsuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: serial + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + nvidia,enable-modem-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable modem interrupts. Should be enable only if all 8 lines of UART controller + are pinmuxed. + + nvidia,adjust-baud-rates: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + List of entries providing percentage of baud rate adjustment within a range. Each entry + contains a set of 3 values: range low/high and adjusted rate. When the baud rate set on the + controller falls within the range mentioned in this field, the baud rate will be adjusted by + percentage mentioned here. + + Example: <9600 115200 200> + + Increase baud rate by 2% when set baud rate falls within range 9600 to 115200. + + Standard UART devices are expected to have tolerance for baud rate error by -4 to +4 %. All + Tegra devices till Tegra210 had this support. However, Tegra186 chip has a known hardware + issue. UART RX baud rate tolerance level is 0% to +4% in 1-stop config. Otherwise, the + received data will have corruption/invalid framing errors. Parker errata suggests adjusting + baud rate to be higher than the deviations observed in TX. + + TX deviation of connected device can be captured over scope (or noted from its spec) for + valid range and Tegra baud rate has to be set above actual TX baud rate observed. To do this + we use nvidia,adjust-baud-rates. + + As an example, consider there is deviation observed in TX for baud rates as listed below. 0 + to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and + Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART + should be set equal to or above deviation observed for avoiding frame errors. Property + should be set like this: + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>; + items: + items: + - description: range lower bound + - description: range upper bound + - description: adjustment (in permyriad, i.e. 0.01%) + +allOf: + - $ref: serial.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra30-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@70006000 { + compatible = "nvidia,tegra30-hsuart"; + reg = <0x70006000 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + nvidia,enable-modem-interrupt; + clocks = <&tegra_car TEGRA30_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; + nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */ + }; diff --git a/dts/Bindings/serial/nxp,sc16is7xx.txt b/dts/Bindings/serial/nxp,sc16is7xx.txt index 0fa8e3e43b..1a7e4bff04 100644 --- a/dts/Bindings/serial/nxp,sc16is7xx.txt +++ b/dts/Bindings/serial/nxp,sc16is7xx.txt @@ -23,6 +23,9 @@ Optional properties: 1 = active low. - irda-mode-ports: An array that lists the indices of the port that should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@51 { @@ -35,6 +38,26 @@ Example: #gpio-cells = <2>; }; + sc16is752: sc16is752@53 { + compatible = "nxp,sc16is752"; + reg = <0x53>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@54 { + compatible = "nxp,sc16is752"; + reg = <0x54>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; + * spi as bus Required properties: @@ -59,6 +82,9 @@ Optional properties: 1 = active low. - irda-mode-ports: An array that lists the indices of the port that should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@0 { @@ -70,3 +96,23 @@ Example: gpio-controller; #gpio-cells = <2>; }; + + sc16is752: sc16is752@1 { + compatible = "nxp,sc16is752"; + reg = <1>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@2 { + compatible = "nxp,sc16is752"; + reg = <2>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; diff --git a/dts/Bindings/serial/snps-dw-apb-uart.yaml b/dts/Bindings/serial/snps-dw-apb-uart.yaml index 3862411c77..17c553123f 100644 --- a/dts/Bindings/serial/snps-dw-apb-uart.yaml +++ b/dts/Bindings/serial/snps-dw-apb-uart.yaml @@ -117,7 +117,6 @@ properties: required: - compatible - reg - - interrupts unevaluatedProperties: false diff --git a/dts/Bindings/serial/st-asc.txt b/dts/Bindings/serial/st-asc.txt index 75d877f596..a1b9b6f349 100644 --- a/dts/Bindings/serial/st-asc.txt +++ b/dts/Bindings/serial/st-asc.txt @@ -8,7 +8,7 @@ Required properties: Optional properties: - st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommeded +- st,force-m1 bool flat to force asc to be in Mode-1 recommended for high bit rates (above 19.2K) Example: serial@fe440000{ diff --git a/dts/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/dts/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml new file mode 100644 index 0000000000..16977e4e43 --- /dev/null +++ b/dts/Bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson System Control registers + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + items: + - enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-hhi-sysctrl + - amlogic,meson-axg-ao-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + type: object + + power-controller: + $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml + + pinctrl: + type: object + + phy: + type: object + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-clkc.yaml# + + required: + - power-controller + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-ao-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml# + + power-controller: false + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + then: + properties: + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + phy: + oneOf: + - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml + - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml + +required: + - compatible + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + bus@c883c000 { + compatible = "simple-bus"; + reg = <0xc883c000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc883c000 0x2000>; + + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x400>; + + clock-controller { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_dvin>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", "dvin", + "rdma", "venci", "vencp", "vdac", "vdi6", + "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + }; + }; + + bus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + sysctrl_AO: system-controller@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x100>; + + clock-controller { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "mpeg-clk"; + }; + }; + }; diff --git a/dts/Bindings/soc/aspeed/uart-routing.yaml b/dts/Bindings/soc/aspeed/uart-routing.yaml index 6876407124..51aaf34acb 100644 --- a/dts/Bindings/soc/aspeed/uart-routing.yaml +++ b/dts/Bindings/soc/aspeed/uart-routing.yaml @@ -3,8 +3,8 @@ # # Copyright (c) 2021 Aspeed Technology Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Aspeed UART Routing Controller diff --git a/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml b/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml index 8634865015..ceb81646fe 100644 --- a/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml +++ b/dts/Bindings/soc/intel/intel,hps-copy-engine.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2022, Intel Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel HPS Copy Engine diff --git a/dts/Bindings/soc/litex/litex,soc-controller.yaml b/dts/Bindings/soc/litex/litex,soc-controller.yaml index ecae9fa856..a64406ca17 100644 --- a/dts/Bindings/soc/litex/litex,soc-controller.yaml +++ b/dts/Bindings/soc/litex/litex,soc-controller.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Antmicro <www.antmicro.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: LiteX SoC Controller driver diff --git a/dts/Bindings/soc/loongson/loongson,ls2k-pmc.yaml b/dts/Bindings/soc/loongson/loongson,ls2k-pmc.yaml new file mode 100644 index 0000000000..da2dcfeebf --- /dev/null +++ b/dts/Bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 Power Manager controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +properties: + compatible: + items: + - enum: + - loongson,ls2k0500-pmc + - loongson,ls2k1000-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + loongson,suspend-address: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + The "loongson,suspend-address" is a deep sleep state (Suspend To + RAM) firmware entry address which was jumped from kernel and it's + value was dependent on specific platform firmware code. In + addition, the PM need according to it to indicate that current + SoC whether support Suspend To RAM. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "syscon"; + reg = <0x1fe27000 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + loongson,suspend-address = <0x0 0x1c000500>; + }; diff --git a/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index 8e6ba2ec8a..f0fa92b04b 100644 --- a/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/dts/Bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -12,7 +12,7 @@ maintainers: description: The MediaTek wo-ccif provides a configuration interface for WED WO - controller used to perfrom offload rx packet processing (e.g. 802.11 + controller used to perform offload rx packet processing (e.g. 802.11 aggregation packet reordering or rx header translation) on MT7986 soc. properties: diff --git a/dts/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/dts/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index 04ffee3a7c..365a9fed59 100644 --- a/dts/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/dts/Bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -12,7 +12,7 @@ maintainers: description: | PolarFire SoC devices include a microcontroller acting as the system controller, which provides "services" to the main processor and to the FPGA fabric. These - services include hardware rng, reprogramming of the FPGA and verfification of the + services include hardware rng, reprogramming of the FPGA and verification of the eNVM contents etc. More information on these services can be found online, at https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html diff --git a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml index 9dc8e48c8a..d1c7c2be86 100644 --- a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -77,7 +77,7 @@ patternProperties: description: The AOSS side channel also provides the controls for three cooling devices, these are expressed as subnodes of the QMP node. The name of the node is - used to identify the resource and must therefor be "cx", "mx" or "ebi". + used to identify the resource and must therefore be "cx", "mx" or "ebi". properties: "#cooling-cells": diff --git a/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml index 6440dc8013..bceb479f74 100644 --- a/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml @@ -38,15 +38,9 @@ properties: patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# - - properties: - reg: true - required: - reg - unevaluatedProperties: false - required: - compatible diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml index 65c02a7fef..2fa725b8af 100644 --- a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml @@ -34,22 +34,27 @@ properties: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 - qcom,rpm-ipq9574 + - qcom,rpm-mdm9607 - qcom,rpm-msm8226 + - qcom,rpm-msm8610 - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8917 - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - qcom,rpm-msm8994 - qcom,rpm-msm8996 - qcom,rpm-msm8998 + - qcom,rpm-qcm2290 + - qcom,rpm-qcs404 - qcom,rpm-sdm660 - qcom,rpm-sm6115 - qcom,rpm-sm6125 - qcom,rpm-sm6375 - - qcom,rpm-qcm2290 - - qcom,rpm-qcs404 clock-controller: $ref: /schemas/clock/qcom,rpmcc.yaml# @@ -81,12 +86,18 @@ if: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-mdm9607 - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8917 - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 + - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - - qcom,rpm-msm8953 - qcom,rpm-msm8994 then: properties: @@ -109,10 +120,10 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> - smd { - compatible = "qcom,smd"; + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; - rpm { + smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/dts/Bindings/soc/qcom/qcom,smd.yaml b/dts/Bindings/soc/qcom/qcom,smd.yaml index 063e595c12..4819ce90d2 100644 --- a/dts/Bindings/soc/qcom/qcom,smd.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd.yaml @@ -15,6 +15,12 @@ description: The Qualcomm Shared Memory Driver is a FIFO based communication channel for sending data between the various subsystems in Qualcomm platforms. + Using the top-level SMD node is deprecated. Instead, the SMD edges are defined + directly below the device node representing the respective remote subsystem + or remote processor. + +deprecated: true + properties: compatible: const: qcom,smd @@ -37,6 +43,7 @@ examples: # The following example represents a smd node, with one edge representing the # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the # "rpm_request" channel. + # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead. - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml index 398663d21a..e52e176d8c 100644 --- a/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml +++ b/dts/Bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/{G2L,V2L} System Controller (SYSC) diff --git a/dts/Bindings/soc/starfive/starfive,jh7110-syscon.yaml b/dts/Bindings/soc/starfive/starfive,jh7110-syscon.yaml new file mode 100644 index 0000000000..0039319e91 --- /dev/null +++ b/dts/Bindings/soc/starfive/starfive,jh7110-syscon.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SoC system controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The StarFive JH7110 SoC system controller provides register information such + as offset, mask and shift to configure related modules such as MMC and PCIe. + +properties: + compatible: + oneOf: + - items: + - const: starfive,jh7110-sys-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - starfive,jh7110-aon-syscon + - starfive,jh7110-stg-syscon + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/starfive,jh7110-pll.yaml# + type: object + + "#power-domain-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: starfive,jh7110-sys-syscon + then: + required: + - clock-controller + else: + properties: + clock-controller: false + - if: + properties: + compatible: + contains: + const: starfive,jh7110-aon-syscon + then: + required: + - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + +additionalProperties: false + +examples: + - | + syscon@10240000 { + compatible = "starfive,jh7110-stg-syscon", "syscon"; + reg = <0x10240000 0x1000>; + }; + + syscon@13030000 { + compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; + reg = <0x13030000 0x1000>; + + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + + syscon@17010000 { + compatible = "starfive,jh7110-aon-syscon", "syscon"; + reg = <0x17010000 0x1000>; + #power-domain-cells = <1>; + }; + +... diff --git a/dts/Bindings/soc/tegra/nvidia,nvec.yaml b/dts/Bindings/soc/tegra/nvidia,nvec.yaml new file mode 100644 index 0000000000..d5261ce3a6 --- /dev/null +++ b/dts/Bindings/soc/tegra/nvidia,nvec.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,nvec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA compliant embedded controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,nvec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: divider clock + - description: fast clock + + clock-names: + minItems: 1 + items: + - const: div-clk + - const: fast-clk + + resets: + items: + - description: module reset + + reset-names: + items: + - const: i2c + + clock-frequency: true + + request-gpios: + description: phandle to the GPIO used for EC request + + slave-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I2C address of the slave controller + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - clock-frequency + - request-gpios + - slave-addr + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@7000c500 { + compatible = "nvidia,nvec"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <80000>; + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + slave-addr = <138>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + }; diff --git a/dts/Bindings/soc/tegra/nvidia,tegra20-ahb.yaml b/dts/Bindings/soc/tegra/nvidia,tegra20-ahb.yaml new file mode 100644 index 0000000000..2f7269a26b --- /dev/null +++ b/dts/Bindings/soc/tegra/nvidia,tegra20-ahb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-ahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +title: NVIDIA Tegra AHB + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-ahb + - nvidia,tegra30-ahb + - items: + - enum: + - nvidia,tegra114-ahb + - nvidia,tegra124-ahb + - nvidia,tegra210-ahb + - const: nvidia,tegra30-ahb + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/dts/Bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml b/dts/Bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml new file mode 100644 index 0000000000..705544b7f9 --- /dev/null +++ b/dts/Bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-flowctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Flow Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-flowctrl + - nvidia,tegra30-flowctrl + - nvidia,tegra114-flowctrl + - nvidia,tegra124-flowctrl + - nvidia,tegra210-flowctrl + + - items: + - const: nvidia,tegra132-flowctrl + - const: nvidia,tegra124-flowctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; diff --git a/dts/Bindings/soc/ti/k3-ringacc.yaml b/dts/Bindings/soc/ti/k3-ringacc.yaml index 22cf9002fe..158186610c 100644 --- a/dts/Bindings/soc/ti/k3-ringacc.yaml +++ b/dts/Bindings/soc/ti/k3-ringacc.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 NavigatorSS Ring Accelerator @@ -34,18 +34,22 @@ properties: - const: ti,am654-navss-ringacc reg: + minItems: 4 items: - description: real time registers regions - description: fifos registers regions - description: proxy gcfg registers regions - description: proxy target registers regions + - description: configuration registers region reg-names: + minItems: 4 items: - const: rt - const: fifos - const: proxy_gcfg - const: proxy_target + - const: cfg msi-parent: true @@ -80,8 +84,9 @@ examples: reg = <0x0 0x3c000000 0x0 0x400000>, <0x0 0x38000000 0x0 0x400000>, <0x0 0x31120000 0x0 0x100>, - <0x0 0x33000000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + <0x0 0x33000000 0x0 0x40000>, + <0x0 0x31080000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; ti,num-rings = <818>; ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ ti,sci = <&dmsc>; diff --git a/dts/Bindings/soc/ti/sci-pm-domain.yaml b/dts/Bindings/soc/ti/sci-pm-domain.yaml index 5df7688a1e..a750035d62 100644 --- a/dts/Bindings/soc/ti/sci-pm-domain.yaml +++ b/dts/Bindings/soc/ti/sci-pm-domain.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# diff --git a/dts/Bindings/sound/amlogic,axg-sound-card.yaml b/dts/Bindings/sound/amlogic,axg-sound-card.yaml index bf12345503..5db718e4d0 100644 --- a/dts/Bindings/sound/amlogic,axg-sound-card.yaml +++ b/dts/Bindings/sound/amlogic,axg-sound-card.yaml @@ -9,6 +9,9 @@ title: Amlogic AXG sound card maintainers: - Jerome Brunet <jbrunet@baylibre.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: amlogic,axg-sound-card @@ -17,23 +20,12 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: list of auxiliary devices - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - patternProperties: "^dai-link-[0-9]+$": type: object @@ -108,7 +100,6 @@ patternProperties: - sound-dai required: - - model - dai-link-0 unevaluatedProperties: false diff --git a/dts/Bindings/sound/amlogic,gx-sound-card.yaml b/dts/Bindings/sound/amlogic,gx-sound-card.yaml index b358fd601e..d4277d342e 100644 --- a/dts/Bindings/sound/amlogic,gx-sound-card.yaml +++ b/dts/Bindings/sound/amlogic,gx-sound-card.yaml @@ -9,6 +9,9 @@ title: Amlogic GX sound card maintainers: - Jerome Brunet <jbrunet@baylibre.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: items: @@ -18,14 +21,6 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: list of auxiliary devices - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - minItems: 2 - description: |- - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array minItems: 2 @@ -33,10 +28,6 @@ properties: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - patternProperties: "^dai-link-[0-9]+$": type: object @@ -86,7 +77,7 @@ required: - model - dai-link-0 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/sound/audio-iio-aux.yaml b/dts/Bindings/sound/audio-iio-aux.yaml new file mode 100644 index 0000000000..d3cc1ea4a1 --- /dev/null +++ b/dts/Bindings/sound/audio-iio-aux.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-iio-aux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio IIO auxiliary + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + Auxiliary device based on Industrial I/O device channels + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: audio-iio-aux + + io-channels: + description: + Industrial I/O device channels used + + io-channel-names: + description: + Industrial I/O channel names related to io-channels. + These names are used to provides sound controls, widgets and routes names. + + snd-control-invert-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + A list of 0/1 flags defining whether or not the related channel is + inverted + items: + enum: [0, 1] + default: 0 + description: | + Invert the sound control value compared to the IIO channel raw value. + - 1: The related sound control value is inverted meaning that the + minimum sound control value correspond to the maximum IIO channel + raw value and the maximum sound control value correspond to the + minimum IIO channel raw value. + - 0: The related sound control value is not inverted meaning that the + minimum (resp maximum) sound control value correspond to the + minimum (resp maximum) IIO channel raw value. + +required: + - compatible + - io-channels + - io-channel-names + +unevaluatedProperties: false + +examples: + - | + iio-aux { + compatible = "audio-iio-aux"; + io-channels = <&iio 0>, <&iio 1>, <&iio 2>, <&iio 3>; + io-channel-names = "CH0", "CH1", "CH2", "CH3"; + /* Invert CH1 and CH2 */ + snd-control-invert-range = <0 1 1 0>; + }; diff --git a/dts/Bindings/sound/awinic,aw88395.yaml b/dts/Bindings/sound/awinic,aw88395.yaml index 35eef7d818..4051c2538c 100644 --- a/dts/Bindings/sound/awinic,aw88395.yaml +++ b/dts/Bindings/sound/awinic,aw88395.yaml @@ -19,7 +19,9 @@ allOf: properties: compatible: - const: awinic,aw88395 + enum: + - awinic,aw88395 + - awinic,aw88261 reg: maxItems: 1 diff --git a/dts/Bindings/sound/axentia,tse850-pcm5142.txt b/dts/Bindings/sound/axentia,tse850-pcm5142.txt index 9d049d4bfd..b6cc5f6f78 100644 --- a/dts/Bindings/sound/axentia,tse850-pcm5142.txt +++ b/dts/Bindings/sound/axentia,tse850-pcm5142.txt @@ -29,7 +29,7 @@ The schematics explaining the gpios are as follows: IN2 +---o--+------------+--o---+ OUT2 loop2 relays -The 'loop1' gpio pin controlls two relays, which are either in loop position, +The 'loop1' gpio pin controls two relays, which are either in loop position, meaning that input and output are directly connected, or they are in mixer position, meaning that the signal is passed through the 'Sum' mixer. Similarly for 'loop2'. diff --git a/dts/Bindings/sound/cirrus,cs42l43.yaml b/dts/Bindings/sound/cirrus,cs42l43.yaml new file mode 100644 index 0000000000..7a6de938b1 --- /dev/null +++ b/dts/Bindings/sound/cirrus,cs42l43.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L43 Audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface + (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed + for portable applications. It provides a high dynamic range, stereo + DAC for headphone output, two integrated Class D amplifiers for + loudspeakers, and two ADCs for wired headset microphone input or + stereo line input. PDM inputs are provided for digital microphones. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs42l43 + + reg: + maxItems: 1 + + vdd-p-supply: + description: + Power supply for the high voltage interface. + + vdd-a-supply: + description: + Power supply for internal analog circuits. + + vdd-d-supply: + description: + Power supply for internal digital circuits. Can be internally supplied. + + vdd-io-supply: + description: + Power supply for external interface and internal digital logic. + + vdd-cp-supply: + description: + Power supply for the amplifier 3 and 4 charge pump. + + vdd-amp-supply: + description: + Power supply for amplifier 1 and 2. + + reset-gpios: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + clocks: + items: + - description: Synchronous audio clock provided on mclk_in. + + clock-names: + const: mclk + + cirrus,bias-low: + type: boolean + description: + Select a 1.8V headset micbias rather than 2.8V. + + cirrus,bias-sense-microamp: + description: + Current at which the headset micbias sense clamp will engage, 0 to + disable. + enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ] + default: 0 + + cirrus,bias-ramp-ms: + description: + Time in milliseconds the hardware allows for the headset micbias to + ramp up. + enum: [ 10, 40, 90, 170 ] + default: 170 + + cirrus,detect-us: + description: + Time in microseconds the type detection will run for. Long values will + cause more audible effects, but give more accurate detection. + enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ] + default: 10000 + + cirrus,button-automute: + type: boolean + description: + Enable the hardware automuting of decimator 1 when a headset button is + pressed. + + cirrus,buttons-ohms: + description: + Impedance in Ohms for each headset button, these should be listed in + ascending order. + minItems: 1 + maxItems: 6 + + cirrus,tip-debounce-ms: + description: + Software debounce on tip sense triggering in milliseconds. + default: 0 + + cirrus,tip-invert: + type: boolean + description: + Indicates tip detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,tip-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the tip detect should be disabled. + + cirrus,tip-fall-db-ms: + description: + Time in milliseconds a falling edge on the tip detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,tip-rise-db-ms: + description: + Time in milliseconds a rising edge on the tip detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,use-ring-sense: + type: boolean + description: + Indicates if the ring sense should be used. + + cirrus,ring-invert: + type: boolean + description: + Indicates ring detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,ring-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the ring detect should be disabled. + + cirrus,ring-fall-db-ms: + description: + Time in milliseconds a falling edge on the ring detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,ring-rise-db-ms: + description: + Time in milliseconds a rising edge on the ring detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + pinctrl: + type: object + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + properties: + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 + + patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/cirrus-cs42l43-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/cirrus-cs42l43-state" + additionalProperties: false + + spi: + type: object + $ref: /schemas/spi/spi-controller.yaml# + unevaluatedProperties: false + +$defs: + cirrus-cs42l43-state: + type: object + + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + properties: + groups: + enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ] + + pins: + enum: [ gpio1, gpio2, gpio3, + asp_dout, asp_fsync, asp_bclk, + pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data, + i2c_sda, i2c_scl, + spi_miso, spi_sck, spi_ssb ] + + function: + enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ] + + drive-strength: + description: Set drive strength in mA + enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ] + + input-debounce: + description: Set input debounce in uS + enum: [ 0, 85 ] + +required: + - compatible + - reg + - vdd-p-supply + - vdd-a-supply + - vdd-io-supply + - vdd-cp-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cs42l43: codec@1a { + compatible = "cirrus,cs42l43"; + reg = <0x1a>; + + vdd-p-supply = <&vdd5v0>; + vdd-a-supply = <&vdd1v8>; + vdd-io-supply = <&vdd1v8>; + vdd-cp-supply = <&vdd1v8>; + vdd-amp-supply = <&vdd5v0>; + + reset-gpios = <&gpio 0>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + #sound-dai-cells = <1>; + + clocks = <&clks 0>; + clock-names = "mclk"; + + cs42l43_pins: pinctrl { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cs42l43_pins 0 0 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: default-state { + shutter-pins { + groups = "gpio3"; + function = "mic-shutter"; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&cs42l43_pins 1 0>; + + sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <1400000>; + }; + }; + }; + }; diff --git a/dts/Bindings/sound/cs35l35.txt b/dts/Bindings/sound/cs35l35.txt index 7915897f8a..e84f30c5c3 100644 --- a/dts/Bindings/sound/cs35l35.txt +++ b/dts/Bindings/sound/cs35l35.txt @@ -110,7 +110,7 @@ Optional Monitor Signal Format sub-node: See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet - -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formating + -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formatting on the I2S Port. Each of the 3 8 bit values in the array contain the settings for depth, location, and frame. diff --git a/dts/Bindings/sound/cs35l36.txt b/dts/Bindings/sound/cs35l36.txt index 912bd162b4..d34117b855 100644 --- a/dts/Bindings/sound/cs35l36.txt +++ b/dts/Bindings/sound/cs35l36.txt @@ -33,7 +33,7 @@ Optional properties: one amplifier in the system. If more than one it is best to Hi-Z the ASP port to prevent bus contention on the output signal - - cirrus,boost-ctl-select : Boost conerter control source selection. + - cirrus,boost-ctl-select : Boost converter control source selection. Selects the source of the BST_CTL target VBST voltage for the boost converter to generate. 0x00 - Control Port Value diff --git a/dts/Bindings/sound/cs53l30.txt b/dts/Bindings/sound/cs53l30.txt index 4dbfb8274c..dc256adb35 100644 --- a/dts/Bindings/sound/cs53l30.txt +++ b/dts/Bindings/sound/cs53l30.txt @@ -30,7 +30,7 @@ Optional properties: * frame using two different ways: * 1) Normal I2S mode on two data pins -- each SDOUT * carries 2-channel data in the same time. - * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 2) TDM mode on one single data pin -- SDOUT1 carries * 4-channel data per frame. Example: diff --git a/dts/Bindings/sound/dialog,da7219.yaml b/dts/Bindings/sound/dialog,da7219.yaml index bb5af48ab1..eb7d219e2c 100644 --- a/dts/Bindings/sound/dialog,da7219.yaml +++ b/dts/Bindings/sound/dialog,da7219.yaml @@ -74,7 +74,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,mic-amp-in-sel: - enum: ["diff", "se_p", "se_n"] + enum: [diff, se_p, se_n] description: Mic input source type. @@ -123,7 +123,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,jack-ins-det-pty: - enum: ["low", "high"] + enum: [low, high] description: Polarity for jack insertion detection. $ref: /schemas/types.yaml#/definitions/string diff --git a/dts/Bindings/sound/fsl,easrc.yaml b/dts/Bindings/sound/fsl,easrc.yaml index bdde68a105..a680d7aff2 100644 --- a/dts/Bindings/sound/fsl,easrc.yaml +++ b/dts/Bindings/sound/fsl,easrc.yaml @@ -14,7 +14,13 @@ properties: pattern: "^easrc@.*" compatible: - const: fsl,imx8mn-easrc + oneOf: + - enum: + - fsl,imx8mn-easrc + - items: + - enum: + - fsl,imx8mp-easrc + - const: fsl,imx8mn-easrc reg: maxItems: 1 diff --git a/dts/Bindings/sound/fsl,esai.txt b/dts/Bindings/sound/fsl,esai.txt index 0a2480aeec..90112ca1ff 100644 --- a/dts/Bindings/sound/fsl,esai.txt +++ b/dts/Bindings/sound/fsl,esai.txt @@ -44,7 +44,7 @@ Required properties: - fsl,esai-synchronous: This is a boolean property. If present, indicating that ESAI would work in the synchronous mode, which means all the settings for Receiving would be - duplicated from Transmition related registers. + duplicated from Transmission related registers. Optional properties: diff --git a/dts/Bindings/sound/fsl,rpmsg.yaml b/dts/Bindings/sound/fsl,rpmsg.yaml index e847611a85..188f38badd 100644 --- a/dts/Bindings/sound/fsl,rpmsg.yaml +++ b/dts/Bindings/sound/fsl,rpmsg.yaml @@ -17,6 +17,9 @@ description: | such as SAI, MICFIL, .etc through building rpmsg channels between Cortex-A and Cortex-M. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -25,10 +28,7 @@ properties: - fsl,imx8mm-rpmsg-audio - fsl,imx8mp-rpmsg-audio - fsl,imx8ulp-rpmsg-audio - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name + - fsl,imx93-rpmsg-audio clocks: items: @@ -65,13 +65,6 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle to a node of audio codec - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: | - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - fsl,enable-lpa: $ref: /schemas/types.yaml#/definitions/flag description: enable low power audio path. @@ -100,9 +93,8 @@ properties: required: - compatible - - model -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/sound/google,sc7180-trogdor.yaml b/dts/Bindings/sound/google,sc7180-trogdor.yaml index ba5b7728cf..bac9405539 100644 --- a/dts/Bindings/sound/google,sc7180-trogdor.yaml +++ b/dts/Bindings/sound/google,sc7180-trogdor.yaml @@ -13,23 +13,15 @@ maintainers: description: This binding describes the SC7180 sound card which uses LPASS for audio. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - google,sc7180-trogdor - google,sc7180-coachz - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - "#address-cells": const: 1 @@ -86,11 +78,10 @@ patternProperties: required: - compatible - - model - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: diff --git a/dts/Bindings/sound/google,sc7280-herobrine.yaml b/dts/Bindings/sound/google,sc7280-herobrine.yaml index 0b1a01a4c1..ec4b6e547c 100644 --- a/dts/Bindings/sound/google,sc7280-herobrine.yaml +++ b/dts/Bindings/sound/google,sc7280-herobrine.yaml @@ -13,22 +13,14 @@ maintainers: description: This binding describes the SC7280 sound card which uses LPASS for audio. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - google,sc7280-herobrine - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - "#address-cells": const: 1 @@ -97,11 +89,10 @@ patternProperties: required: - compatible - - model - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: diff --git a/dts/Bindings/sound/gtm601.txt b/dts/Bindings/sound/gtm601.txt deleted file mode 100644 index efa32a486c..0000000000 --- a/dts/Bindings/sound/gtm601.txt +++ /dev/null @@ -1,19 +0,0 @@ -GTM601 UMTS modem audio interface CODEC - -This device has no configuration interface. The sample rate and channels are -based on the compatible string - "option,gtm601" = 8kHz mono - "broadmobi,bm818" = 48KHz stereo - -Required properties: - - - compatible : one of - "option,gtm601" - "broadmobi,bm818" - - -Example: - -codec: gtm601_codec { - compatible = "option,gtm601"; -}; diff --git a/dts/Bindings/sound/imx-audio-card.yaml b/dts/Bindings/sound/imx-audio-card.yaml index b6f5d48660..f7ad5ea249 100644 --- a/dts/Bindings/sound/imx-audio-card.yaml +++ b/dts/Bindings/sound/imx-audio-card.yaml @@ -9,23 +9,14 @@ title: NXP i.MX audio sound card. maintainers: - Shengjiu Wang <shengjiu.wang@nxp.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - fsl,imx-audio-card - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. Valid names could be power supplies, - MicBias of codec and the jacks on the board. - patternProperties: ".*-dai-link$": description: @@ -84,9 +75,8 @@ patternProperties: required: - compatible - - model -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/sound/max9892x.txt b/dts/Bindings/sound/max9892x.txt deleted file mode 100644 index 98cb9ba5b3..0000000000 --- a/dts/Bindings/sound/max9892x.txt +++ /dev/null @@ -1,44 +0,0 @@ -Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier - -This device supports I2C. - -Required properties: - - - compatible : should be one of the following - - "maxim,max98925" - - "maxim,max98926" - - "maxim,max98927" - - - vmon-slot-no : slot number used to send voltage information - or in inteleave mode this will be used as - interleave slot. - MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 - MAX98927 slot range : 0 ~ 15, Default : 0 - - - imon-slot-no : slot number used to send current information - MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 - MAX98927 slot range : 0 ~ 15, Default : 0 - - - interleave-mode : When using two MAX9892X in a system it is - possible to create ADC data that that will - overflow the frame size. Digital Audio Interleave - mode provides a means to output VMON and IMON data - from two devices on a single DOUT line when running - smaller frames sizes such as 32 BCLKS per LRCLK or - 48 BCLKS per LRCLK. - Range : 0 (off), 1 (on), Default : 0 - - - reg : the I2C address of the device for I2C - -Optional properties: - - reset-gpios : GPIO to reset the device - -Example: - -codec: max98927@3a { - compatible = "maxim,max98927"; - vmon-slot-no = <0>; - imon-slot-no = <1>; - interleave-mode = <0>; - reg = <0x3a>; -}; diff --git a/dts/Bindings/sound/maxim,max98925.yaml b/dts/Bindings/sound/maxim,max98925.yaml new file mode 100644 index 0000000000..32fd86204a --- /dev/null +++ b/dts/Bindings/sound/maxim,max98925.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier + +maintainers: + - Ryan Lee <ryans.lee@maximintegrated.com> + +properties: + compatible: + enum: + - maxim,max98925 + - maxim,max98926 + - maxim,max98927 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 30 + default: 0 + description: + Slot number used to send voltage information or in inteleave mode this + will be used as interleave slot. + + imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 30 + default: 0 + description: + Slot number used to send current information. + + maxim,interleave-mode: + type: boolean + description: + When using two MAX9892X in a system it is possible to create ADC data + that will overflow the frame size. When enabled, the Digital Audio + Interleave mode provides a means to output VMON and IMON data from two + devices on a single DOUT line when running smaller frames sizes such as + 32 BCLKS per LRCLK or 48 BCLKS per LRCLK. + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - maxim,max98927 + then: + properties: + vmon-slot-no: + minimum: 0 + maximum: 15 + + imon-slot-no: + minimum: 0 + maximum: 15 + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + #include <dt-bindings/gpio/gpio.h> + audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + #sound-dai-cells = <0>; + + pinctrl-0 = <&speaker_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <0>; + }; + }; diff --git a/dts/Bindings/sound/mediatek,mt7986-afe.yaml b/dts/Bindings/sound/mediatek,mt7986-afe.yaml new file mode 100644 index 0000000000..398efdfe00 --- /dev/null +++ b/dts/Bindings/sound/mediatek,mt7986-afe.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AFE PCM controller for MT7986 + +maintainers: + - Maso Huang <maso.huang@mediatek.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt7986-afe + - items: + - enum: + - mediatek,mt7981-afe + - mediatek,mt7988-afe + - const: mediatek,mt7986-afe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 5 + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + - description: audio i2s/pcm mck + + clock-names: + minItems: 5 + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + - const: i2s_m + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + + - if: + properties: + compatible: + contains: + const: mediatek,mt7981-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + - description: audio i2s/pcm mck + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + - const: i2s_m + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7986-clk.h> + + afe@11210000 { + compatible = "mediatek,mt7986-afe"; + reg = <0x11210000 0x9000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>, + <&infracfg_ao CLK_INFRA_AUD_26M_CK>, + <&infracfg_ao CLK_INFRA_AUD_L_CK>, + <&infracfg_ao CLK_INFRA_AUD_AUD_CK>, + <&infracfg_ao CLK_INFRA_AUD_EG2_CK>; + clock-names = "bus_ck", + "26m_ck", + "l_ck", + "aud_ck", + "eg2_ck"; + assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>, + <&topckgen CLK_TOP_AUD_L_SEL>, + <&topckgen CLK_TOP_A_TUNER_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>, + <&apmixedsys CLK_APMIXED_APLL2>, + <&topckgen CLK_TOP_APLL2_D4>; + }; + +... diff --git a/dts/Bindings/sound/mediatek,mt7986-wm8960.yaml b/dts/Bindings/sound/mediatek,mt7986-wm8960.yaml new file mode 100644 index 0000000000..09247ceea3 --- /dev/null +++ b/dts/Bindings/sound/mediatek,mt7986-wm8960.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7986 sound card with WM8960 codec + +maintainers: + - Maso Huang <maso.huang@mediatek.com> + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + const: mediatek,mt7986-wm8960-sound + + platform: + type: object + additionalProperties: false + properties: + sound-dai: + description: The phandle of MT7986 platform. + maxItems: 1 + required: + - sound-dai + + codec: + type: object + additionalProperties: false + properties: + sound-dai: + description: The phandle of wm8960 codec. + maxItems: 1 + required: + - sound-dai + +unevaluatedProperties: false + +required: + - compatible + - audio-routing + - platform + - codec + +examples: + - | + sound { + compatible = "mediatek,mt7986-wm8960-sound"; + model = "mt7986-wm8960"; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + + platform { + sound-dai = <&afe>; + }; + + codec { + sound-dai = <&wm8960>; + }; + }; + +... diff --git a/dts/Bindings/sound/mediatek,mt8188-afe.yaml b/dts/Bindings/sound/mediatek,mt8188-afe.yaml index e6cb711ece..90520f8920 100644 --- a/dts/Bindings/sound/mediatek,mt8188-afe.yaml +++ b/dts/Bindings/sound/mediatek,mt8188-afe.yaml @@ -25,6 +25,12 @@ properties: reset-names: const: audiosys + memory-region: + maxItems: 1 + description: | + Shared memory region for AFE memif. A "shared-dma-pool". + See ../reserved-memory/reserved-memory.yaml for details. + mediatek,topckgen: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller @@ -135,7 +141,7 @@ patternProperties: maxItems: 16 description: This is a list of channel IDs which should be disabled. - By default, all data received from ETDM pins will be outputed to + By default, all data received from ETDM pins will be outputted to memory. etdm in supports disable_out in direct mode(w/o interconn), so user can disable the specified channels by the property. uniqueItems: true @@ -176,6 +182,7 @@ examples: interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>; resets = <&watchdog 14>; reset-names = "audiosys"; + memory-region = <&snd_dma_mem_reserved>; mediatek,topckgen = <&topckgen>; mediatek,infracfg = <&infracfg_ao>; power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO diff --git a/dts/Bindings/sound/mediatek,mt8188-mt6359.yaml b/dts/Bindings/sound/mediatek,mt8188-mt6359.yaml index 05e532b5d5..43b3b67bdf 100644 --- a/dts/Bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/dts/Bindings/sound/mediatek,mt8188-mt6359.yaml @@ -9,23 +9,19 @@ title: MediaTek MT8188 ASoC sound card maintainers: - Trevor Wu <trevor.wu@mediatek.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - mediatek,mt8188-mt6359-evb - mediatek,mt8188-nau8825 - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: - A list of the connections between audio components. Each entry is a - sink/source pair of strings. Valid names could be the input or output - widgets of audio components, power supplies, MicBias of codec and the - software switch. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle @@ -86,7 +82,7 @@ patternProperties: required: - link-name -additionalProperties: false +unevaluatedProperties: false required: - compatible @@ -96,6 +92,7 @@ examples: - | sound { compatible = "mediatek,mt8188-mt6359-evb"; + model = "MT6359-EVB"; mediatek,platform = <&afe>; pinctrl-names = "default"; pinctrl-0 = <&aud_pins_default>; diff --git a/dts/Bindings/sound/mt2701-afe-pcm.txt b/dts/Bindings/sound/mt2701-afe-pcm.txt index 560762e0a1..f548e6a582 100644 --- a/dts/Bindings/sound/mt2701-afe-pcm.txt +++ b/dts/Bindings/sound/mt2701-afe-pcm.txt @@ -1,7 +1,7 @@ Mediatek AFE PCM controller for mt2701 Required properties: -- compatible: should be one of the followings. +- compatible: should be one of the following. - "mediatek,mt2701-audio" - "mediatek,mt7622-audio" - interrupts: should contain AFE and ASYS interrupts diff --git a/dts/Bindings/sound/mt8195-afe-pcm.yaml b/dts/Bindings/sound/mt8195-afe-pcm.yaml index d5adf07d46..5c8dba2b3a 100644 --- a/dts/Bindings/sound/mt8195-afe-pcm.yaml +++ b/dts/Bindings/sound/mt8195-afe-pcm.yaml @@ -111,7 +111,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm in moudule. + which etdm clock source is required by this etdm in module. enum: - 0 # etdm1_in - 1 # etdm2_in @@ -122,7 +122,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm out moudule. + which etdm clock source is required by this etdm out module. enum: - 0 # etdm1_in - 1 # etdm2_in diff --git a/dts/Bindings/sound/nau8821.txt b/dts/Bindings/sound/nau8821.txt deleted file mode 100644 index 7c84e7c732..0000000000 --- a/dts/Bindings/sound/nau8821.txt +++ /dev/null @@ -1,55 +0,0 @@ -Nuvoton NAU88L21 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8821" - - - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - - nuvoton,key_enable: Headset button detection switch. - -Example: - - headset: nau8821@1b { - compatible = "nuvoton,nau8821"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,dmic-clk-threshold = 3072000; - }; diff --git a/dts/Bindings/sound/nuvoton,nau8821.yaml b/dts/Bindings/sound/nuvoton,nau8821.yaml new file mode 100644 index 0000000000..3e54abd4ca --- /dev/null +++ b/dts/Bindings/sound/nuvoton,nau8821.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU88L21 audio codec + +maintainers: + - Seven Lee <wtli@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8821 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,key-enable: + description: handles key press detection. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + + nuvoton,left-input-single-end: + description: Enable left input with single-ended settings if set. + For the headset mic application, the single-ended control is + just limited to the left adc for design demand. + type: boolean + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,key-enable; + nuvoton,left-input-single-end; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,micbias-voltage = <6>; + nuvoton,vref-impedance = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <0>; + nuvoton,dmic-clk-threshold = <3072000>; + #sound-dai-cells = <0>; + }; + }; diff --git a/dts/Bindings/sound/nuvoton,nau8822.yaml b/dts/Bindings/sound/nuvoton,nau8822.yaml index 65105402a5..cb8182bbc4 100644 --- a/dts/Bindings/sound/nuvoton,nau8822.yaml +++ b/dts/Bindings/sound/nuvoton,nau8822.yaml @@ -21,6 +21,15 @@ properties: reg: maxItems: 1 + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + nuvoton,spk-btl: description: If set, configure the two loudspeaker outputs as a Bridge Tied Load output @@ -31,6 +40,9 @@ required: - compatible - reg +allOf: + - $ref: dai-common.yaml# + additionalProperties: false examples: diff --git a/dts/Bindings/sound/nvidia,tegra-audio-max9808x.yaml b/dts/Bindings/sound/nvidia,tegra-audio-max9808x.yaml index fc89dbd6bf..c29d794291 100644 --- a/dts/Bindings/sound/nvidia,tegra-audio-max9808x.yaml +++ b/dts/Bindings/sound/nvidia,tegra-audio-max9808x.yaml @@ -35,12 +35,12 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Earpiece" - - "Headset Mic" - - "Internal Mic 1" - - "Internal Mic 2" + - Int Spk + - Headphone Jack + - Earpiece + - Headset Mic + - Internal Mic 1 + - Internal Mic 2 # CODEC Pins - HPL diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5631.yaml b/dts/Bindings/sound/nvidia,tegra-audio-rt5631.yaml index a04487002e..0c8067c3b0 100644 --- a/dts/Bindings/sound/nvidia,tegra-audio-rt5631.yaml +++ b/dts/Bindings/sound/nvidia,tegra-audio-rt5631.yaml @@ -31,10 +31,10 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Mic Jack" - - "Int Mic" + - Int Spk + - Headphone Jack + - Mic Jack + - Int Mic # CODEC Pins - MIC1 diff --git a/dts/Bindings/sound/option,gtm601.yaml b/dts/Bindings/sound/option,gtm601.yaml new file mode 100644 index 0000000000..ff813d97fc --- /dev/null +++ b/dts/Bindings/sound/option,gtm601.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/option,gtm601.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GTM601 UMTS modem audio interface CODEC + +maintainers: + - kernel@puri.sm + +description: > + This device has no configuration interface. The sample rate and channels are + based on the compatible string + +properties: + compatible: + oneOf: + - description: Broadmobi BM818 (48Khz stereo) + items: + - const: broadmobi,bm818 + - const: option,gtm601 + - description: GTM601 (8kHz mono) + const: option,gtm601 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + +allOf: + - $ref: dai-common.yaml# + +additionalProperties: false + +examples: + - | + codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt deleted file mode 100644 index e7d17dda55..0000000000 --- a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt +++ /dev/null @@ -1,101 +0,0 @@ -msm8916 analog audio CODEC - -Bindings for codec Analog IP which is integrated in pmic pm8916, - -## Bindings for codec core on pmic: - -Required properties - - compatible = "qcom,pm8916-wcd-analog-codec"; - - reg: represents the slave base address provided to the peripheral. - - interrupts: List of interrupts in given SPMI peripheral. - - interrupt-names: Names specified to above list of interrupts in same - order. List of supported interrupt names are: - "cdc_spk_cnp_int" - Speaker click and pop interrupt. - "cdc_spk_clip_int" - Speaker clip interrupt. - "cdc_spk_ocp_int" - Speaker over current protect interrupt. - "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. - "mbhc_but_rel_det" - button release interrupt. - "mbhc_but_press_det" - button press event - "mbhc_ins_rem_det" - jack insert removal detect interrupt. - "mbhc_switch_int" - multi button headset interrupt. - "cdc_ear_ocp_int" - Earphone over current protect interrupt. - "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. - "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. - "cdc_ear_cnp_int" - earphone cnp interrupt. - "cdc_hphr_cnp_int" - hphr click and pop interrupt. - "cdc_hphl_cnp_int" - hphl click and pop interrupt. - - - clocks: Handle to mclk. - - clock-names: should be "mclk" - - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - -Optional Properties: - - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons - detection on headset when the mbhc is powered up - by internal current source, this is a low power. - - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons - detection on headset when mbhc is powered up - from micbias. -- qcom,micbias-lvl: Voltage (mV) for Mic Bias -- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a - NO (Normally Open). If not specified, then - its assumed that hphl pin on jack is NC - (Normally Closed). -- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is - NO (Normally Open). If not specified, then - its assumed that gnd pin on jack is NC - (Normally Closed). -- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor - connected. -- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor - connected. - -Example: - -spmi_bus { - ... - audio-codec@f000{ - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; - #sound-dai-cells = <1>; - }; -}; diff --git a/dts/Bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/dts/Bindings/sound/qcom,pm8916-wcd-analog-codec.yaml new file mode 100644 index 0000000000..94e7a18609 --- /dev/null +++ b/dts/Bindings/sound/qcom,pm8916-wcd-analog-codec.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8916 WCD Analog Audio Codec + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The analog WCD audio codec found on Qualcomm PM8916 PMIC. + +properties: + compatible: + const: qcom,pm8916-wcd-analog-codec + + reg: + maxItems: 1 + + interrupts: + maxItems: 14 + + interrupt-names: + items: + - const: cdc_spk_cnp_int + - const: cdc_spk_clip_int + - const: cdc_spk_ocp_int + - const: mbhc_ins_rem_det1 + - const: mbhc_but_rel_det + - const: mbhc_but_press_det + - const: mbhc_ins_rem_det + - const: mbhc_switch_int + - const: cdc_ear_ocp_int + - const: cdc_hphr_ocp_int + - const: cdc_hphl_ocp_det + - const: cdc_ear_cnp_int + - const: cdc_hphr_cnp_int + - const: cdc_hphl_cnp_int + + vdd-cdc-io-supply: + description: 1.8V buck supply + + vdd-cdc-tx-rx-cx-supply: + description: 1.8V SIDO buck supply + + vdd-micbias-supply: + description: micbias supply + + qcom,mbhc-vthreshold-low: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered by an internal current source. + minItems: 5 + maxItems: 5 + + qcom,mbhc-vthreshold-high: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered from micbias. + minItems: 5 + maxItems: 5 + + qcom,micbias-lvl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Voltage (mV) for Mic Bias + + qcom,hphl-jack-type-normally-open: + type: boolean + description: + True if the HPHL pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,gnd-jack-type-normally-open: + type: boolean + description: + True if the GND pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,micbias1-ext-cap: + type: boolean + description: + True if micbias1 has an external capacitor. + + qcom,micbias2-ext-cap: + type: boolean + description: + True if micbias2 has an external capacitor. + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@1 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; + }; diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt index b731f16aea..dfd768b1ad 100644 --- a/dts/Bindings/sound/renesas,rsnd.txt +++ b/dts/Bindings/sound/renesas,rsnd.txt @@ -94,7 +94,7 @@ see "Example: simple sound card for Asynchronous mode" [xx]ch [yy]ch ------> [CTU] --------> -CTU can convert [xx]ch to [yy]ch, or exchange outputed channel. +CTU can convert [xx]ch to [yy]ch, or exchange outputted channel. CTU conversion needs matrix settings. For more detail information, see below diff --git a/dts/Bindings/sound/renesas,rsnd.yaml b/dts/Bindings/sound/renesas,rsnd.yaml index 8a821dec95..13a5a0a10f 100644 --- a/dts/Bindings/sound/renesas,rsnd.yaml +++ b/dts/Bindings/sound/renesas,rsnd.yaml @@ -9,6 +9,20 @@ title: Renesas R-Car Sound Driver maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +definitions: + port-def: + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: audio-graph-port.yaml#/definitions/endpoint-base + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + unevaluatedProperties: false + properties: compatible: @@ -77,6 +91,12 @@ properties: it must be 1 if your system has audio_clkout0/1/2/3 enum: [0, 1] + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + clock-frequency: description: for audio_clkout0/1/2/3 @@ -103,35 +123,9 @@ properties: description: List of necessary clock names. # details are defined below - ports: - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - '^port(@[0-9a-f]+)?$': - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - "^endpoint(@[0-9a-f]+)?": - $ref: audio-graph-port.yaml#/definitions/endpoint-base - properties: - playback: - $ref: /schemas/types.yaml#/definitions/phandle-array - capture: - $ref: /schemas/types.yaml#/definitions/phandle-array - unevaluatedProperties: false - + # ports is below port: - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - "^endpoint(@[0-9a-f]+)?": - $ref: audio-graph-port.yaml#/definitions/endpoint-base - properties: - playback: - $ref: /schemas/types.yaml#/definitions/phandle-array - capture: - $ref: /schemas/types.yaml#/definitions/phandle-array - unevaluatedProperties: false + $ref: "#/definitions/port-def" rcar_sound,dvc: description: DVC subnode. @@ -248,8 +242,9 @@ properties: - interrupts additionalProperties: false +patternProperties: # For DAI base - rcar_sound,dai: + 'rcar_sound,dai(@[0-9a-f]+)?$': description: DAI subnode. type: object patternProperties: @@ -269,6 +264,13 @@ properties: - capture additionalProperties: false + 'ports(@[0-9a-f]+)?$': + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false + patternProperties: + '^port(@[0-9a-f]+)?$': + $ref: "#/definitions/port-def" + required: - compatible - reg diff --git a/dts/Bindings/sound/rockchip,rk3288-hdmi-analog.txt b/dts/Bindings/sound/rockchip,rk3288-hdmi-analog.txt index e5430d1d34..73577ac1b8 100644 --- a/dts/Bindings/sound/rockchip,rk3288-hdmi-analog.txt +++ b/dts/Bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -12,7 +12,7 @@ Required properties: source. For this driver the first string should always be "Analog". -Optionnal properties: +Optional properties: - rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the headphone (when the analog output is an headphone). - rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone diff --git a/dts/Bindings/sound/rt5663.txt b/dts/Bindings/sound/rt5663.txt index 2a55e91334..24a6dab28f 100644 --- a/dts/Bindings/sound/rt5663.txt +++ b/dts/Bindings/sound/rt5663.txt @@ -28,7 +28,7 @@ Optional properties: If the value is 0, it means the impedance sensing is not supported. - "realtek,impedance_sensing_table" The matrix rows of the impedance sensing table are consisted by impedance - minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + minimum, impedance maximum, volume, DC offset w/o and w/ mic of each L and R channel accordingly. Example is shown as following. < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> diff --git a/dts/Bindings/sound/samsung,aries-wm8994.yaml b/dts/Bindings/sound/samsung,aries-wm8994.yaml index 447e013f6e..5ea0819a26 100644 --- a/dts/Bindings/sound/samsung,aries-wm8994.yaml +++ b/dts/Bindings/sound/samsung,aries-wm8994.yaml @@ -9,6 +9,9 @@ title: Samsung Aries audio complex with WM8994 codec maintainers: - Jonathan Bakker <xc-racer2@live.ca> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -17,10 +20,6 @@ properties: # Without FM radio and modem slave - samsung,fascinate4g-wm8994 - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - cpu: type: object additionalProperties: false @@ -46,6 +45,7 @@ properties: samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true description: | List of the connections between audio components; each entry is a pair of strings, the first being the @@ -56,6 +56,7 @@ properties: or FM In For samsung,fascinate4g-wm8994: HP, SPK, RCV, LINE, Main Mic, or HeadsetMic + Deprecated, use audio-routing. extcon: description: Extcon phandle for dock detection @@ -87,10 +88,9 @@ properties: required: - compatible - - model - cpu - codec - - samsung,audio-routing + - audio-routing - extcon - main-micbias-supply - headset-micbias-supply @@ -98,7 +98,7 @@ required: - headset-detect-gpios - headset-key-gpios -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -121,7 +121,7 @@ examples: headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>; headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; - samsung,audio-routing = + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", diff --git a/dts/Bindings/sound/samsung,midas-audio.yaml b/dts/Bindings/sound/samsung,midas-audio.yaml index 31095913e3..6ec80f529d 100644 --- a/dts/Bindings/sound/samsung,midas-audio.yaml +++ b/dts/Bindings/sound/samsung,midas-audio.yaml @@ -9,14 +9,13 @@ title: Samsung Midas audio complex with WM1811 codec maintainers: - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: samsung,midas-audio - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - cpu: type: object additionalProperties: false @@ -38,6 +37,7 @@ properties: - sound-dai samsung,audio-routing: + deprecated: true $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: | List of the connections between audio components; each entry is @@ -45,6 +45,7 @@ properties: being the connection's source; valid names for sources and sinks are the WM1811's pins (as documented in its binding), and the jacks on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic. + Deprecated, use audio-routing. mic-bias-supply: description: Supply for the micbias on the Main microphone @@ -62,14 +63,13 @@ properties: required: - compatible - - model - cpu - codec - - samsung,audio-routing + - audio-routing - mic-bias-supply - submic-bias-supply -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -84,7 +84,7 @@ examples: mic-bias-supply = <&mic_bias_reg>; submic-bias-supply = <&submic_bias_reg>; - samsung,audio-routing = + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", diff --git a/dts/Bindings/sound/samsung,odroid.yaml b/dts/Bindings/sound/samsung,odroid.yaml index c6751c40e6..b77284e3e2 100644 --- a/dts/Bindings/sound/samsung,odroid.yaml +++ b/dts/Bindings/sound/samsung,odroid.yaml @@ -10,6 +10,9 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: oneOf: @@ -24,10 +27,6 @@ properties: - const: samsung,odroid-xu4-audio deprecated: true - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - assigned-clock-parents: true assigned-clock-rates: true assigned-clocks: true @@ -52,6 +51,7 @@ properties: samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true description: | List of the connections between audio components; each entry is a pair of strings, the first being the @@ -61,6 +61,7 @@ properties: For Odroid X2: "Headphone Jack", "Mic Jack", "DMIC" For Odroid U3, XU3: "Headphone Jack", "Speakers" For Odroid XU4: no entries + Deprecated, use audio-routing. samsung,audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array @@ -70,18 +71,17 @@ properties: required: - compatible - - model - cpu - codec -additionalProperties: false +unevaluatedProperties: false examples: - | sound { compatible = "hardkernel,odroid-xu3-audio"; model = "Odroid-XU3"; - samsung,audio-routing = + audio-routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "IN1", "Mic Jack", diff --git a/dts/Bindings/sound/samsung,tm2.yaml b/dts/Bindings/sound/samsung,tm2.yaml index 491e08019c..7605925991 100644 --- a/dts/Bindings/sound/samsung,tm2.yaml +++ b/dts/Bindings/sound/samsung,tm2.yaml @@ -10,6 +10,9 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: samsung,tm2-audio @@ -32,6 +35,8 @@ properties: being the connection's source; valid names for sources and sinks are the WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main Mic, Sub Mic, Third Mic, Headset Mic. + Deprecated, use audio-routing. + deprecated: true $ref: /schemas/types.yaml#/definitions/non-unique-string-array i2s-controller: @@ -44,20 +49,15 @@ properties: mic-bias-gpios: description: GPIO pin that enables the Main Mic bias regulator. - model: - description: The user-visible name of this sound complex. - $ref: /schemas/types.yaml#/definitions/string - required: - compatible - audio-amplifier - audio-codec - - samsung,audio-routing + - audio-routing - i2s-controller - mic-bias-gpios - - model -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -70,7 +70,7 @@ examples: audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; - samsung,audio-routing = "HP", "HPOUT1L", + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", "SPK", "SPKOUT", "SPKOUT", "HPOUT2L", diff --git a/dts/Bindings/sound/serial-midi.yaml b/dts/Bindings/sound/serial-midi.yaml index 4afc29376e..f6a807329a 100644 --- a/dts/Bindings/sound/serial-midi.yaml +++ b/dts/Bindings/sound/serial-midi.yaml @@ -20,7 +20,7 @@ description: parent serial device. If the standard MIDI baud of 31.25 kBaud is needed (as would be the case if interfacing with arbitrary external MIDI devices), configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud - resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) properties: compatible: diff --git a/dts/Bindings/sound/simple-card.yaml b/dts/Bindings/sound/simple-card.yaml index b05e05c81c..59ac2d1d1c 100644 --- a/dts/Bindings/sound/simple-card.yaml +++ b/dts/Bindings/sound/simple-card.yaml @@ -148,6 +148,15 @@ definitions: required: - sound-dai + additional-devs: + type: object + description: + Additional devices used by the simple audio card. + patternProperties: + '^iio-aux(-.+)?$': + type: object + $ref: audio-iio-aux.yaml# + properties: compatible: contains: @@ -187,6 +196,8 @@ properties: $ref: "#/definitions/mclk-fs" simple-audio-card,aux-devs: $ref: "#/definitions/aux-devs" + simple-audio-card,additional-devs: + $ref: "#/definitions/additional-devs" simple-audio-card,convert-rate: $ref: "#/definitions/convert-rate" simple-audio-card,convert-channels: @@ -360,6 +371,48 @@ examples: }; # -------------------- +# route audio to/from a codec through an amplifier +# designed with a potentiometer driven by IIO: +# -------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,aux-devs = <&_in>, <&_out>; + simple-audio-card,routing = + "CODEC LEFTIN", "AMP_IN LEFT OUT", + "CODEC RIGHTIN", "AMP_IN RIGHT OUT", + "AMP_OUT LEFT IN", "CODEC LEFTOUT", + "AMP_OUT RIGHT IN", "CODEC RIGHTOUT"; + + simple-audio-card,additional-devs { + amp_out: iio-aux-out { + compatible = "audio-iio-aux"; + io-channels = <&pot_out 0>, <&pot_out 1>; + io-channel-names = "LEFT", "RIGHT"; + snd-control-invert-range = <1 1>; + sound-name-prefix = "AMP_OUT"; + }; + + amp_in: iio_aux-in { + compatible = "audio-iio-aux"; + io-channels = <&pot_in 0>, <&pot_in 1>; + io-channel-names = "LEFT", "RIGHT"; + sound-name-prefix = "AMP_IN"; + }; + }; + + simple-audio-card,cpu { + sound-dai = <&cpu>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clocks>; + }; + }; + +# -------------------- # Sampling Rate Conversion # -------------------- - | diff --git a/dts/Bindings/sound/snps,designware-i2s.yaml b/dts/Bindings/sound/snps,designware-i2s.yaml index a970fd264b..a48d040b0a 100644 --- a/dts/Bindings/sound/snps,designware-i2s.yaml +++ b/dts/Bindings/sound/snps,designware-i2s.yaml @@ -17,6 +17,9 @@ properties: - const: snps,designware-i2s - enum: - snps,designware-i2s + - starfive,jh7110-i2stx0 + - starfive,jh7110-i2stx1 + - starfive,jh7110-i2srx reg: maxItems: 1 @@ -29,15 +32,36 @@ properties: maxItems: 1 clocks: - description: Sampling rate reference clock - maxItems: 1 + items: + - description: Sampling rate reference clock + - description: APB clock + - description: Audio master clock + - description: Inner audio master clock source + - description: External audio master clock source + - description: Bit clock + - description: Left/right channel clock + - description: External bit clock + - description: External left/right channel clock + minItems: 1 clock-names: - const: i2sclk + items: + - const: i2sclk + - const: apb + - const: mclk + - const: mclk_inner + - const: mclk_ext + - const: bclk + - const: lrck + - const: bclk_ext + - const: lrck_ext + minItems: 1 resets: items: - description: Optional controller resets + - description: controller reset of Sampling rate + minItems: 1 dmas: items: @@ -51,6 +75,17 @@ properties: - const: rx minItems: 1 + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller sys_syscon node. + - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register. + - description: I2S-rx enabled control mask + description: + The phandle to System Register Controller syscon node and the I2S-rx(ADC) + enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register. + allOf: - $ref: dai-common.yaml# - if: @@ -66,6 +101,73 @@ allOf: properties: "#sound-dai-cells": const: 0 + - if: + properties: + compatible: + contains: + const: snps,designware-i2s + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + resets: + maxItems: 1 + else: + properties: + resets: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2stx0 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + minItems: 5 + maxItems: 5 + required: + - resets + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2stx1 + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + minItems: 9 + maxItems: 9 + required: + - resets + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2srx + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + minItems: 9 + maxItems: 9 + required: + - resets + - starfive,syscon + else: + properties: + starfive,syscon: false required: - compatible diff --git a/dts/Bindings/sound/sound-card-common.yaml b/dts/Bindings/sound/sound-card-common.yaml new file mode 100644 index 0000000000..3a941177f6 --- /dev/null +++ b/dts/Bindings/sound/sound-card-common.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sound-card-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Board Sound Card Common Properties + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + +required: + - model + +additionalProperties: true diff --git a/dts/Bindings/sound/sprd-pcm.txt b/dts/Bindings/sound/sprd-pcm.txt index 4b23e84b2e..fbbcade218 100644 --- a/dts/Bindings/sound/sprd-pcm.txt +++ b/dts/Bindings/sound/sprd-pcm.txt @@ -1,4 +1,4 @@ -* Spreadtrum DMA platfrom bindings +* Spreadtrum DMA platform bindings Required properties: - compatible: Should be "sprd,pcm-platform". diff --git a/dts/Bindings/sound/st,stm32-sai.yaml b/dts/Bindings/sound/st,stm32-sai.yaml index 56d206f97a..59df8a8323 100644 --- a/dts/Bindings/sound/st,stm32-sai.yaml +++ b/dts/Bindings/sound/st,stm32-sai.yaml @@ -63,7 +63,7 @@ patternProperties: additionalProperties: false description: Two subnodes corresponding to SAI sub-block instances A et B - can be defined. Subnode can be omitted for unsused sub-block. + can be defined. Subnode can be omitted for unused sub-block. properties: compatible: diff --git a/dts/Bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/dts/Bindings/sound/ti,j721e-cpb-ivi-audio.yaml index 859d369c71..5b2874a80a 100644 --- a/dts/Bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/dts/Bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -13,7 +13,7 @@ maintainers: description: | The Infotainment board plugs into the Common Processor Board, the support of the - extension board is extending the CPB audio support, decribed in: + extension board is extending the CPB audio support, described in: sound/ti,j721e-cpb-audio.txt The audio support on the Infotainment Expansion Board consists of McASP0 diff --git a/dts/Bindings/sound/ti,tas2781.yaml b/dts/Bindings/sound/ti,tas2781.yaml index 8d60e4e236..a69e6c2233 100644 --- a/dts/Bindings/sound/ti,tas2781.yaml +++ b/dts/Bindings/sound/ti,tas2781.yaml @@ -29,7 +29,7 @@ properties: reg: description: I2C address, in multiple tas2781s case, all the i2c address - aggreate as one Audio Device to support multiple audio slots. + aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 items: diff --git a/dts/Bindings/sound/tlv320adcx140.yaml b/dts/Bindings/sound/tlv320adcx140.yaml index c16e1760cf..f3274bcc4c 100644 --- a/dts/Bindings/sound/tlv320adcx140.yaml +++ b/dts/Bindings/sound/tlv320adcx140.yaml @@ -32,7 +32,7 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: maxItems: 1 diff --git a/dts/Bindings/sound/wlf,wm8904.yaml b/dts/Bindings/sound/wlf,wm8904.yaml new file mode 100644 index 0000000000..329260cf0f --- /dev/null +++ b/dts/Bindings/sound/wlf,wm8904.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8904.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8904/WM8912 audio codecs + +maintainers: + - patches@opensource.cirrus.com + +description: | + Pins on the device (for linking into audio routes): + IN1L, IN1R, IN2L, IN2R, IN3L, IN3R, HPOUTL, HPOUTR, LINEOUTL, LINEOUTR, + MICBIAS + +properties: + compatible: + enum: + - wlf,wm8904 + - wlf,wm8912 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + AVDD-supply: true + CPVDD-supply: true + DBVDD-supply: true + DCVDD-supply: true + MICVDD-supply: true + +required: + - compatible + - reg + - clocks + - clock-names + - AVDD-supply + - CPVDD-supply + - DBVDD-supply + - DCVDD-supply + - MICVDD-supply + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + AVDD-supply = <®_1p8v>; + CPVDD-supply = <®_1p8v>; + DBVDD-supply = <®_1p8v>; + DCVDD-supply = <®_1p8v>; + MICVDD-supply = <®_1p8v>; + }; + }; diff --git a/dts/Bindings/sound/wlf,wm8960.yaml b/dts/Bindings/sound/wlf,wm8960.yaml index ee8eba7f01..62e62c335d 100644 --- a/dts/Bindings/sound/wlf,wm8960.yaml +++ b/dts/Bindings/sound/wlf,wm8960.yaml @@ -26,6 +26,21 @@ properties: '#sound-dai-cells': const: 0 + AVDD-supply: + description: Analogue supply. + + DBVDD-supply: + description: Digital Buffer Supply. + + DCVDD-supply: + description: Digital Core Supply. + + SPKVDD1-supply: + description: Supply for speaker drivers 1. + + SPKVDD2-supply: + description: Supply for speaker drivers 2. + wlf,capless: type: boolean description: @@ -84,5 +99,10 @@ examples: wlf,hp-cfg = <3 2 3>; wlf,gpio-cfg = <1 3>; wlf,shared-lrclk; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; }; }; diff --git a/dts/Bindings/sound/wm8904.txt b/dts/Bindings/sound/wm8904.txt deleted file mode 100644 index 66bf261423..0000000000 --- a/dts/Bindings/sound/wm8904.txt +++ /dev/null @@ -1,33 +0,0 @@ -WM8904 audio CODEC - -This device supports I2C only. - -Required properties: - - compatible: "wlf,wm8904" or "wlf,wm8912" - - reg: the I2C address of the device. - - clock-names: "mclk" - - clocks: reference to - <Documentation/devicetree/bindings/clock/clock-bindings.txt> - -Pins on the device (for linking into audio routes): - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * MICBIAS - -Examples: - -codec: wm8904@1a { - compatible = "wlf,wm8904"; - reg = <0x1a>; - clocks = <&pck0>; - clock-names = "mclk"; -}; diff --git a/dts/Bindings/soundwire/qcom,soundwire.yaml b/dts/Bindings/soundwire/qcom,soundwire.yaml index fb44b89a75..7d60a96549 100644 --- a/dts/Bindings/soundwire/qcom,soundwire.yaml +++ b/dts/Bindings/soundwire/qcom,soundwire.yaml @@ -159,7 +159,7 @@ properties: qcom,ports-hstart: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying lowerst numbered coloum in SoundWire Frame, + Identifying lowerst numbered column in SoundWire Frame, i.e. left edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented @@ -176,7 +176,7 @@ properties: qcom,ports-hstop: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying highest numbered coloum in SoundWire Frame, + Identifying highest numbered column in SoundWire Frame, i.e. the right edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented diff --git a/dts/Bindings/spi/brcm,bcm2835-aux-spi.txt b/dts/Bindings/spi/brcm,bcm2835-aux-spi.txt index 9887b07247..d7668f41b0 100644 --- a/dts/Bindings/spi/brcm,bcm2835-aux-spi.txt +++ b/dts/Bindings/spi/brcm,bcm2835-aux-spi.txt @@ -1,4 +1,4 @@ -Broadcom BCM2835 auxiliar SPI1/2 controller +Broadcom BCM2835 auxiliary SPI1/2 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the @@ -9,7 +9,7 @@ Required properties: - reg: Should contain register location and length for the spi block - interrupts: Should contain shared interrupt of the aux block - clocks: The clock feeding the SPI controller - needs to - point to the auxiliar clock driver of the bcm2835, + point to the auxiliary clock driver of the bcm2835, as this clock will enable the output gate for the specific clock. - cs-gpios: the cs-gpios (native cs is NOT supported) diff --git a/dts/Bindings/spi/brcm,bcm63xx-spi.yaml b/dts/Bindings/spi/brcm,bcm63xx-spi.yaml new file mode 100644 index 0000000000..fa03cdd68e --- /dev/null +++ b/dts/Bindings/spi/brcm,bcm63xx-spi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6348/BCM6358 SPI controller + +maintainers: + - Jonas Gorski <jonas.gorski@gmail.com> + +description: | + Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband + SoCs. + + This controller has a limitation that can not keep the chip select line active + between the SPI transfers within the same SPI message. This can terminate the + transaction to some SPI devices prematurely. The issue can be worked around by + the controller's prepend mode. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm6368-spi + - brcm,bcm6362-spi + - brcm,bcm63268-spi + - const: brcm,bcm6358-spi + - enum: + - brcm,bcm6348-spi + - brcm,bcm6358-spi + + reg: + maxItems: 1 + + clocks: + items: + - description: SPI master reference clock + + clock-names: + items: + - const: spi + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi@10000800 { + compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + interrupts = <1>; + clocks = <&clkctl 9>; + clock-names = "spi"; + num-cs = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/spi/brcm,spi-bcm-qspi.yaml b/dts/Bindings/spi/brcm,spi-bcm-qspi.yaml index 28222aae30..45975f40d9 100644 --- a/dts/Bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/dts/Bindings/spi/brcm,spi-bcm-qspi.yaml @@ -12,7 +12,7 @@ maintainers: description: | The Broadcom SPI controller is a SPI master found on various SOCs, including - BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits + BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists of: MSPI : SPI master controller can read and write to a SPI slave device BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration @@ -20,7 +20,7 @@ description: | io with 3-byte and 4-byte addressing support. Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. - MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance + MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance of a MSPI master without the BSPI to use with non flash slave devices that use SPI protocol. diff --git a/dts/Bindings/spi/cdns,qspi-nor.yaml b/dts/Bindings/spi/cdns,qspi-nor.yaml index 4f15f9a0cc..cca81f89e2 100644 --- a/dts/Bindings/spi/cdns,qspi-nor.yaml +++ b/dts/Bindings/spi/cdns,qspi-nor.yaml @@ -86,7 +86,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: ref + - items: + - const: ref + - const: ahb + - const: apb cdns,fifo-depth: description: diff --git a/dts/Bindings/spi/loongson,ls2k-spi.yaml b/dts/Bindings/spi/loongson,ls2k-spi.yaml new file mode 100644 index 0000000000..de9d32fead --- /dev/null +++ b/dts/Bindings/spi/loongson,ls2k-spi.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SPI controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls2k1000-spi + - items: + - enum: + - loongson,ls2k0500-spi + - const: loongson,ls2k1000-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi0: spi@1fff0220{ + compatible = "loongson,ls2k1000-spi"; + reg = <0x1fff0220 0x10>; + clocks = <&clk 17>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/dts/Bindings/spi/nvidia,tegra114-spi.txt b/dts/Bindings/spi/nvidia,tegra114-spi.txt deleted file mode 100644 index db8e0d71c5..0000000000 --- a/dts/Bindings/spi/nvidia,tegra114-spi.txt +++ /dev/null @@ -1,61 +0,0 @@ -NVIDIA Tegra114 SPI controller. - -Required properties: -- compatible : For Tegra114, must contain "nvidia,tegra114-spi". - Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where - <chip> is tegra124, tegra132, or tegra210. -- reg: Should contain SPI registers location and length. -- interrupts: Should contain SPI interrupts. -- clock-names : Must include the following entries: - - spi -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -Optional properties: -- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device - with this tap value. This property is used to tune the outgoing data from - Tegra SPI master with respect to outgoing Tegra SPI master clock. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. -- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device - with this tap value. This property is used to adjust the Tegra SPI master - clock with respect to the data from the SPI slave device. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra114-spi"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - clock-names = "spi"; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - <spi-client>@<bus_num> { - ... - ... - nvidia,rx-clk-tap-delay = <0>; - nvidia,tx-clk-tap-delay = <16>; - ... - }; - -}; diff --git a/dts/Bindings/spi/nvidia,tegra114-spi.yaml b/dts/Bindings/spi/nvidia,tegra114-spi.yaml new file mode 100644 index 0000000000..58222ffa53 --- /dev/null +++ b/dts/Bindings/spi/nvidia,tegra114-spi.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 SPI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra114-spi + - items: + - enum: + - nvidia,tegra210-spi + - nvidia,tegra124-spi + - const: nvidia,tegra114-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI module clock + + clock-names: + items: + - const: spi + + resets: + items: + - description: SPI module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + spi-max-frequency = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + nvidia,rx-clk-tap-delay = <0>; + nvidia,tx-clk-tap-delay = <16>; + }; + }; diff --git a/dts/Bindings/spi/nvidia,tegra20-sflash.txt b/dts/Bindings/spi/nvidia,tegra20-sflash.txt deleted file mode 100644 index c212491929..0000000000 --- a/dts/Bindings/spi/nvidia,tegra20-sflash.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20 SFLASH controller. - -Required properties: -- compatible : should be "nvidia,tegra20-sflash". -- reg: Should contain SFLASH registers location and length. -- interrupts: Should contain SFLASH interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000c380 { - compatible = "nvidia,tegra20-sflash"; - reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 43>; - resets = <&tegra_car 43>; - reset-names = "spi"; - dmas = <&apbdma 11>, <&apbdma 11>; - dma-names = "rx", "tx"; -}; diff --git a/dts/Bindings/spi/nvidia,tegra20-sflash.yaml b/dts/Bindings/spi/nvidia,tegra20-sflash.yaml new file mode 100644 index 0000000000..e245bad85a --- /dev/null +++ b/dts/Bindings/spi/nvidia,tegra20-sflash.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SFLASH controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-sflash + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; + }; diff --git a/dts/Bindings/spi/nvidia,tegra20-slink.txt b/dts/Bindings/spi/nvidia,tegra20-slink.txt deleted file mode 100644 index 40d80b93e3..0000000000 --- a/dts/Bindings/spi/nvidia,tegra20-slink.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20/Tegra30 SLINK controller. - -Required properties: -- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". -- reg: Should contain SLINK registers location and length. -- interrupts: Should contain SLINK interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra20-slink"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; -}; diff --git a/dts/Bindings/spi/nvidia,tegra20-slink.yaml b/dts/Bindings/spi/nvidia,tegra20-slink.yaml new file mode 100644 index 0000000000..291c25ec01 --- /dev/null +++ b/dts/Bindings/spi/nvidia,tegra20-slink.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/30 SLINK controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-slink + - nvidia,tegra30-slink + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + }; diff --git a/dts/Bindings/spi/omap-spi.yaml b/dts/Bindings/spi/omap-spi.yaml index 352affa4b7..ff4d361707 100644 --- a/dts/Bindings/spi/omap-spi.yaml +++ b/dts/Bindings/spi/omap-spi.yaml @@ -68,7 +68,7 @@ properties: dma-names: description: List of DMA request names. These strings correspond 1:1 with - the DMA sepecifiers listed in dmas. The string names is to be + the DMA specifiers listed in dmas. The string names is to be "rxN" and "txN" for RX and TX requests, respectively. Where N is the chip select number. minItems: 1 diff --git a/dts/Bindings/spi/spi-bcm63xx.txt b/dts/Bindings/spi/spi-bcm63xx.txt deleted file mode 100644 index 1c16f66926..0000000000 --- a/dts/Bindings/spi/spi-bcm63xx.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for Broadcom BCM6348/BCM6358 SPI controller - -Required properties: -- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi". -- reg: Base address and size of the controllers memory area. -- interrupts: Interrupt for the SPI block. -- clocks: phandle of the SPI clock. -- clock-names: has to be "spi". -- #address-cells: <1>, as required by generic SPI binding. -- #size-cells: <0>, also as required by generic SPI binding. - -Optional properties: -- num-cs: some controllers have less than 8 cs signals. Defaults to 8 - if absent. - -Child nodes as per the generic SPI binding. - -Example: - - spi@10000800 { - compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; - reg = <0x10000800 0x70c>; - - interrupts = <1>; - - clocks = <&clkctl 9>; - clock-names = "spi"; - - num-cs = <5>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/dts/Bindings/spi/spi-cadence.yaml b/dts/Bindings/spi/spi-cadence.yaml index b7552739b5..d4b61b0e83 100644 --- a/dts/Bindings/spi/spi-cadence.yaml +++ b/dts/Bindings/spi/spi-cadence.yaml @@ -49,6 +49,12 @@ properties: enum: [ 0, 1 ] default: 0 + power-domains: + maxItems: 1 + + label: + description: Descriptive name of the SPI controller. + required: - compatible - reg diff --git a/dts/Bindings/spi/spi-fsl-lpspi.yaml b/dts/Bindings/spi/spi-fsl-lpspi.yaml index e914250123..727c5346b8 100644 --- a/dts/Bindings/spi/spi-fsl-lpspi.yaml +++ b/dts/Bindings/spi/spi-fsl-lpspi.yaml @@ -63,6 +63,9 @@ properties: maximum: 2 default: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/spi/spi-nxp-fspi.yaml b/dts/Bindings/spi/spi-nxp-fspi.yaml index a813c971ec..7fd5911454 100644 --- a/dts/Bindings/spi/spi-nxp-fspi.yaml +++ b/dts/Bindings/spi/spi-nxp-fspi.yaml @@ -45,6 +45,9 @@ properties: - const: fspi_en - const: fspi + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/spi/spi-pl022.yaml b/dts/Bindings/spi/spi-pl022.yaml index 91e540a92f..5e5a704a76 100644 --- a/dts/Bindings/spi/spi-pl022.yaml +++ b/dts/Bindings/spi/spi-pl022.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - $ref: /schemas/arm/primecell.yaml# # We need a select here so we don't match all nodes with 'arm,primecell' select: diff --git a/dts/Bindings/sram/qcom,ocmem.yaml b/dts/Bindings/sram/qcom,ocmem.yaml index 4bbf6db0b6..61c784ef7b 100644 --- a/dts/Bindings/sram/qcom,ocmem.yaml +++ b/dts/Bindings/sram/qcom,ocmem.yaml @@ -15,7 +15,9 @@ description: | properties: compatible: - const: qcom,msm8974-ocmem + enum: + - qcom,msm8226-ocmem # v1.1.0 + - qcom,msm8974-ocmem # v1.4.0 reg: items: @@ -28,11 +30,13 @@ properties: - const: mem clocks: + minItems: 1 items: - description: Core clock - description: Interface clock clock-names: + minItems: 1 items: - const: core - const: iface @@ -58,6 +62,26 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-ocmem + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + else: + properties: + clocks: + minItems: 1 + clock-names: + minItems: 1 + patternProperties: "-sram@[0-9a-f]+$": type: object diff --git a/dts/Bindings/thermal/loongson,ls2k-thermal.yaml b/dts/Bindings/thermal/loongson,ls2k-thermal.yaml new file mode 100644 index 0000000000..7538469997 --- /dev/null +++ b/dts/Bindings/thermal/loongson,ls2k-thermal.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/loongson,ls2k-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thermal sensors on Loongson-2 SoCs + +maintainers: + - zhanghongchen <zhanghongchen@loongson.cn> + - Yinbo Zhu <zhuyinbo@loongson.cn> + +properties: + compatible: + oneOf: + - enum: + - loongson,ls2k1000-thermal + - items: + - enum: + - loongson,ls2k2000-thermal + - const: loongson,ls2k1000-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + thermal: thermal-sensor@1fe01500 { + compatible = "loongson,ls2k1000-thermal"; + reg = <0x1fe01500 0x30>; + interrupt-parent = <&liointc0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/dts/Bindings/thermal/nvidia,tegra124-soctherm.txt b/dts/Bindings/thermal/nvidia,tegra124-soctherm.txt deleted file mode 100644 index aea4a2a178..0000000000 --- a/dts/Bindings/thermal/nvidia,tegra124-soctherm.txt +++ /dev/null @@ -1,238 +0,0 @@ -Tegra124 SOCTHERM thermal management system - -The SOCTHERM IP block contains thermal sensors, support for polled -or interrupt-based thermal monitoring, CPU and GPU throttling based -on temperature trip points, and handling external overcurrent -notifications. It is also used to manage emergency shutdown in an -overheating situation. - -Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". - For Tegra132, must contain "nvidia,tegra132-soctherm". - For Tegra210, must contain "nvidia,tegra210-soctherm". -- reg : Should contain at least 2 entries for each entry in reg-names: - - SOCTHERM register set - - Tegra CAR register set: Required for Tegra124 and Tegra210. - - CCROC register set: Required for Tegra132. -- reg-names : Should contain at least 2 entries: - - soctherm-reg - - car-reg - - ccroc-reg -- interrupts : Defines the interrupt used by SOCTHERM -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - tsensor - - soctherm -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - soctherm -- #thermal-sensor-cells : Should be 1. For a description of this property, see - Documentation/devicetree/bindings/thermal/thermal-sensor.yaml. - See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values - when referring to thermal sensors. -- throttle-cfgs: A sub-node which is a container of configuration for each - hardware throttle events. These events can be set as cooling devices. - * throttle events: Sub-nodes must be named as "light" or "heavy". - Properties: - - nvidia,priority: Each throttles has its own throttle settings, so the - SW need to set priorities for various throttle, the HW arbiter can select - the final throttle settings. - Bigger value indicates higher priority, In general, higher priority - translates to lower target frequency. SW needs to ensure that critical - thermal alarms are given higher priority, and ensure that there is - no race if priority of two vectors is set to the same value. - The range of this value is 1~100. - - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210. - It is the throttling depth of pulse skippers, it's the percentage - throttling. - - nvidia,cpu-throt-level: This property is only for Tegra132, it is the - level of pulse skippers, which used to throttle clock frequencies. It - indicates cpu clock throttling depth, and the depth can be programmed. - Must set as following values: - TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED - TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE - - nvidia,gpu-throt-level: This property is for Tegra124 and Tegra210. - It is the level of pulse skippers, which used to throttle clock - frequencies. It indicates gpu clock throttling depth and can be - programmed to any of the following values which represent a throttling - percentage: - TEGRA_SOCTHERM_THROT_LEVEL_NONE (0%) - TEGRA_SOCTHERM_THROT_LEVEL_LOW (50%), - TEGRA_SOCTHERM_THROT_LEVEL_MED (75%), - TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%). - - #cooling-cells: Should be 1. This cooling device only support on/off state. - For a description of this property see: - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml - - Optional properties: The following properties are T210 specific and - valid only for OCx throttle events. - - nvidia,count-threshold: Specifies the number of OC events that are - required for triggering an interrupt. Interrupts are not triggered if - the property is missing. A value of 0 will interrupt on every OC alarm. - - nvidia,polarity-active-low: Configures the polarity of the OC alaram - signal. If present, this means assert low, otherwise assert high. - - nvidia,alarm-filter: Number of clocks to filter event. When the filter - expires (which means the OC event has not occurred for a long time), - the counter is cleared and filter is rearmed. Default value is 0. - - nvidia,throttle-period-us: Specifies the number of uSec for which - throttling is engaged after the OC event is deasserted. Default value - is 0. - -Optional properties: -- nvidia,thermtrips : When present, this property specifies the temperature at - which the soctherm hardware will assert the thermal trigger signal to the - Power Management IC, which can be configured to reset or shutdown the device. - It is an array of pairs where each pair represents a tsensor id followed by a - temperature in milli Celcius. In the absence of this property the critical - trip point will be used for thermtrip temperature. - -Note: -- the "critical" type trip points will be used to set the temperature at which -the SOC_THERM hardware will assert a thermal trigger if the "nvidia,thermtrips" -property is missing. When the thermtrips property is present, the breach of a -critical trip point is reported back to the thermal framework to implement -software shutdown. - -- the "hot" type trip points will be set to SOC_THERM hardware as the throttle -temperature. Once the temperature of this thermal zone is higher -than it, it will trigger the HW throttle event. - -Example : - - soctherm@700e2000 { - compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x60006000 0x0 0x400 /* CAR reg_base */ - reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; - clock-names = "tsensor", "soctherm"; - resets = <&tegra_car 78>; - reset-names = "soctherm"; - - #thermal-sensor-cells = <1>; - - nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500 - TEGRA124_SOCTHERM_SENSOR_GPU 103000>; - - throttle-cfgs { - /* - * When the "heavy" cooling device triggered, - * the HW will skip cpu clock's pulse in 85% depth, - * skip gpu clock's pulse in 85% level - */ - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-percent = <85>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; - - #cooling-cells = <1>; - }; - - /* - * When the "light" cooling device triggered, - * the HW will skip cpu clock's pulse in 50% depth, - * skip gpu clock's pulse in 50% level - */ - throttle_light: light { - nvidia,priority = <80>; - nvidia,cpu-throt-percent = <50>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>; - - #cooling-cells = <1>; - }; - - /* - * If these two devices are triggered in same time, the HW throttle - * arbiter will select the highest priority as the final throttle - * settings to skip cpu pulse. - */ - - throttle_oc1: oc1 { - nvidia,priority = <50>; - nvidia,polarity-active-low; - nvidia,count-threshold = <100>; - nvidia,alarm-filter = <5100000>; - nvidia,throttle-period-us = <0>; - nvidia,cpu-throt-percent = <75>; - nvidia,gpu-throt-level = - <TEGRA_SOCTHERM_THROT_LEVEL_MED>; - }; - }; - }; - -Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" : - - soctherm@700e2000 { - compatible = "nvidia,tegra132-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */; - reg-names = "soctherm-reg", "ccroc-reg"; - - throttle-cfgs { - /* - * When the "heavy" cooling device triggered, - * the HW will skip cpu clock's pulse in HIGH level - */ - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; - - #cooling-cells = <1>; - }; - - /* - * When the "light" cooling device triggered, - * the HW will skip cpu clock's pulse in MED level - */ - throttle_light: light { - nvidia,priority = <80>; - nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; - - #cooling-cells = <1>; - }; - - /* - * If these two devices are triggered in same time, the HW throttle - * arbiter will select the highest priority as the final throttle - * settings to skip cpu pulse. - */ - - }; - }; - -Example: referring to thermal sensors : - - thermal-zones { - cpu { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; - - trips { - cpu_shutdown_trip: shutdown-trip { - temperature = <102500>; - hysteresis = <1000>; - type = "critical"; - }; - - cpu_throttle_trip: throttle-trip { - temperature = <100000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_throttle_trip>; - cooling-device = <&throttle_heavy 1 1>; - }; - }; - }; - }; diff --git a/dts/Bindings/thermal/nvidia,tegra124-soctherm.yaml b/dts/Bindings/thermal/nvidia,tegra124-soctherm.yaml new file mode 100644 index 0000000000..04a2ba1aa9 --- /dev/null +++ b/dts/Bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -0,0 +1,380 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/nvidia,tegra124-soctherm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 SOCTHERM Thermal Management System + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The SOCTHERM IP block contains thermal sensors, support for + polled or interrupt-based thermal monitoring, CPU and GPU throttling based + on temperature trip points, and handling external overcurrent notifications. + It is also used to manage emergency shutdown in an overheating situation. + +properties: + compatible: + enum: + - nvidia,tegra124-soctherm + - nvidia,tegra132-soctherm + - nvidia,tegra210-soctherm + + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + + interrupts: + items: + - description: module interrupt + - description: EDP interrupt + + interrupt-names: + items: + - const: thermal + - const: edp + + clocks: + items: + - description: thermal sensor clock + - description: module clock + + clock-names: + items: + - const: tsensor + - const: soctherm + + resets: + items: + - description: module reset + + reset-names: + items: + - const: soctherm + + "#thermal-sensor-cells": + const: 1 + + throttle-cfgs: + $ref: thermal-cooling-devices.yaml + description: A sub-node which is a container of configuration for each + hardware throttle events. These events can be set as cooling devices. + Throttle event sub-nodes must be named as "light" or "heavy". + unevaluatedProperties: false + patternProperties: + "^(light|heavy|oc1)$": + type: object + properties: + nvidia,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 100 + description: Each throttles has its own throttle settings, so the + SW need to set priorities for various throttle, the HW arbiter + can select the final throttle settings. Bigger value indicates + higher priority, In general, higher priority translates to lower + target frequency. SW needs to ensure that critical thermal + alarms are given higher priority, and ensure that there is no + race if priority of two vectors is set to the same value. + + nvidia,cpu-throt-percent: + description: This property is for Tegra124 and Tegra210. It is the + throttling depth of pulse skippers, it's the percentage + throttling. + minimum: 0 + maximum: 100 + + nvidia,cpu-throt-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This property is only for Tegra132, it is the level + of pulse skippers, which used to throttle clock frequencies. It + indicates cpu clock throttling depth, and the depth can be + programmed. + enum: + # none (TEGRA_SOCTHERM_THROT_LEVEL_NONE) + - 0 + # low (TEGRA_SOCTHERM_THROT_LEVEL_LOW) + - 1 + # medium (TEGRA_SOCTHERM_THROT_LEVEL_MED) + - 2 + # high (TEGRA_SOCTHERM_THROT_LEVEL_HIGH) + - 3 + + nvidia,gpu-throt-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This property is for Tegra124 and Tegra210. It is the + level of pulse skippers, which used to throttle clock + frequencies. It indicates gpu clock throttling depth and can be + programmed to any of the following values which represent a + throttling percentage. + enum: + # none (0%, TEGRA_SOCTHERM_THROT_LEVEL_NONE) + - 0 + # low (50%, TEGRA_SOCTHERM_THROT_LEVEL_LOW) + - 1 + # medium (75%, TEGRA_SOCTHERM_THROT_LEVEL_MED) + - 2 + # high (85%, TEGRA_SOCTHERM_THROT_LEVEL_HIGH) + - 3 + + # optional + # Tegra210 specific and valid only for OCx throttle events + nvidia,count-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Specifies the number of OC events that are required + for triggering an interrupt. Interrupts are not triggered if the + property is missing. A value of 0 will interrupt on every OC + alarm. + + nvidia,polarity-active-low: + $ref: /schemas/types.yaml#/definitions/flag + description: Configures the polarity of the OC alaram signal. If + present, this means assert low, otherwise assert high. + + nvidia,alarm-filter: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of clocks to filter event. When the filter + expires (which means the OC event has not occurred for a long + time), the counter is cleared and filter is rearmed. + default: 0 + + nvidia,throttle-period-us: + description: Specifies the number of microseconds for which + throttling is engaged after the OC event is deasserted. + default: 0 + + # optional + nvidia,thermtrips: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + When present, this property specifies the temperature at which the + SOCTHERM hardware will assert the thermal trigger signal to the Power + Management IC, which can be configured to reset or shutdown the device. + It is an array of pairs where each pair represents a tsensor ID followed + by a temperature in milli Celcius. In the absence of this property the + critical trip point will be used for thermtrip temperature. + + Note: + - the "critical" type trip points will be used to set the temperature at + which the SOCTHERM hardware will assert a thermal trigger if the + "nvidia,thermtrips" property is missing. When the thermtrips property + is present, the breach of a critical trip point is reported back to + the thermal framework to implement software shutdown. + + - the "hot" type trip points will be set to SOCTHERM hardware as the + throttle temperature. Once the temperature of this thermal zone is + higher than it, it will trigger the HW throttle event. + items: + items: + - description: sensor ID + oneOf: + - description: CPU sensor + const: 0 + - description: MEM sensor + const: 1 + - description: GPU sensor + const: 2 + - description: PLLX sensor + const: 3 + - description: temperature threshold (in millidegree Celsius) + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - "#thermal-sensor-cells" + +allOf: + - $ref: thermal-sensor.yaml + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-soctherm + - nvidia,tegra210-soctherm + then: + properties: + reg: + items: + - description: SOCTHERM register set + - description: clock and reset controller registers + + reg-names: + items: + - const: soctherm-reg + - const: car-reg + + else: + properties: + reg: + items: + - description: SOCTHERM register set + - description: CCROC registers + + reg-names: + items: + - const: soctherm-reg + - const: ccroc-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/thermal/tegra124-soctherm.h> + + soctherm@700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */ + <0x60006000 0x400>; /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + + #thermal-sensor-cells = <1>; + + nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500>, + <TEGRA124_SOCTHERM_SENSOR_GPU 103000>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in 85% depth, + * skip gpu clock's pulse in 85% level + */ + heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in 50% depth, + * skip gpu clock's pulse in 50% level + */ + light { + nvidia,priority = <80>; + nvidia,cpu-throt-percent = <50>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>; + + #cooling-cells = <2>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + + oc1 { + nvidia,priority = <50>; + nvidia,polarity-active-low; + nvidia,count-threshold = <100>; + nvidia,alarm-filter = <5100000>; + nvidia,throttle-period-us = <0>; + nvidia,cpu-throt-percent = <75>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; + }; + }; + }; + + # referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" + - | + thermal-sensor@700e2000 { + compatible = "nvidia,tegra132-soctherm"; + reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */ + <0x70040000 0x200>; /* CCROC reg_base */ + reg-names = "soctherm-reg", "ccroc-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in HIGH level + */ + heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in MED level + */ + light { + nvidia,priority = <80>; + nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; + + #cooling-cells = <2>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + }; + }; + + # referring to thermal sensors + - | + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + + trips { + cpu_shutdown_trip: shutdown-trip { + temperature = <102500>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_throttle_trip: throttle-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; + }; + }; + }; diff --git a/dts/Bindings/thermal/qcom-lmh.yaml b/dts/Bindings/thermal/qcom-lmh.yaml index 92762efc21..5ff72ce5c8 100644 --- a/dts/Bindings/thermal/qcom-lmh.yaml +++ b/dts/Bindings/thermal/qcom-lmh.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Limits Management Hardware(LMh) maintainers: - - Thara Gopinath <thara.gopinath@linaro.org> + - Thara Gopinath <thara.gopinath@gmail.com> description: Limits Management Hardware(LMh) is a hardware infrastructure on some diff --git a/dts/Bindings/timer/ingenic,tcu.yaml b/dts/Bindings/timer/ingenic,tcu.yaml index 2d14610888..585b5f5217 100644 --- a/dts/Bindings/timer/ingenic,tcu.yaml +++ b/dts/Bindings/timer/ingenic,tcu.yaml @@ -8,7 +8,7 @@ title: Ingenic SoCs Timer/Counter Unit (TCU) description: | For a description of the TCU hardware and drivers, have a look at - Documentation/mips/ingenic-tcu.rst. + Documentation/arch/mips/ingenic-tcu.rst. maintainers: - Paul Cercueil <paul@crapouillou.net> diff --git a/dts/Bindings/timer/oxsemi,rps-timer.txt b/dts/Bindings/timer/oxsemi,rps-timer.txt deleted file mode 100644 index d191612539..0000000000 --- a/dts/Bindings/timer/oxsemi,rps-timer.txt +++ /dev/null @@ -1,17 +0,0 @@ -Oxford Semiconductor OXNAS SoCs Family RPS Timer -================================================ - -Required properties: -- compatible: Should be "oxsemi,ox810se-rps-timer" or "oxsemi,ox820-rps-timer" -- reg : Specifies base physical address and size of the registers. -- interrupts : The interrupts of the two timers -- clocks : The phandle of the timer clock source - -example: - -timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; -}; diff --git a/dts/Bindings/timer/snps,arc-timer.txt b/dts/Bindings/timer/snps,arc-timer.txt index 147ef3e744..b02ab0af10 100644 --- a/dts/Bindings/timer/snps,arc-timer.txt +++ b/dts/Bindings/timer/snps,arc-timer.txt @@ -1,7 +1,7 @@ Synopsys ARC Local Timer with Interrupt Capabilities - Found on all ARC CPUs (ARC700/ARCHS) - Can be optionally programmed to interrupt on Limit -- Two idential copies TIMER0 and TIMER1 exist in ARC cores and historically +- Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically TIMER0 used as clockevent provider (true for all ARC cores) TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS) diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml index ba2bfb5479..cd58179ae3 100644 --- a/dts/Bindings/trivial-devices.yaml +++ b/dts/Bindings/trivial-devices.yaml @@ -119,6 +119,10 @@ properties: - fsl,mpr121 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -193,13 +197,13 @@ properties: - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 - # 10-bit 10 kOhm linear programable voltage divider + # 10-bit 10 kOhm linear programmable voltage divider - maxim,max5481 - # 10-bit 50 kOhm linear programable voltage divider + # 10-bit 50 kOhm linear programmable voltage divider - maxim,max5482 - # 10-bit 10 kOhm linear programable variable resistor + # 10-bit 10 kOhm linear programmable variable resistor - maxim,max5483 - # 10-bit 50 kOhm linear programable variable resistor + # 10-bit 50 kOhm linear programmable variable resistor - maxim,max5484 # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion - maxim,max6621 @@ -291,8 +295,6 @@ properties: - miramems,da311 # Temperature sensor with integrated fan control - national,lm63 - # I2C TEMP SENSOR - - national,lm75 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm80 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor @@ -315,6 +317,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Renesas HS3001 Temperature and Relative Humidity Sensors + - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor - renesas,isl29501 # Rohm DH2228FV diff --git a/dts/Bindings/ufs/qcom,ufs.yaml b/dts/Bindings/ufs/qcom,ufs.yaml index bdfa86a0cc..462ead5a1c 100644 --- a/dts/Bindings/ufs/qcom,ufs.yaml +++ b/dts/Bindings/ufs/qcom,ufs.yaml @@ -29,6 +29,7 @@ properties: - qcom,sa8775p-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -79,6 +80,11 @@ properties: minItems: 1 maxItems: 2 + reg-names: + items: + - const: std + - const: ice + required-opps: maxItems: 1 @@ -134,6 +140,8 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 - if: properties: @@ -162,6 +170,10 @@ allOf: reg: minItems: 2 maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names - if: properties: @@ -190,6 +202,37 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: ice_core_clk + reg: + minItems: 2 + maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names # TODO: define clock bindings for qcom,msm8994-ufshc @@ -274,5 +317,6 @@ examples: <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; }; }; diff --git a/dts/Bindings/ufs/ufs-common.yaml b/dts/Bindings/ufs/ufs-common.yaml index 47a4e9e1a7..bbaee4f5f7 100644 --- a/dts/Bindings/ufs/ufs-common.yaml +++ b/dts/Bindings/ufs/ufs-common.yaml @@ -74,7 +74,7 @@ properties: Specifies max. load that can be drawn from VCCQ2 supply. dependencies: - freq-table-hz: [ 'clocks' ] + freq-table-hz: [ clocks ] required: - interrupts diff --git a/dts/Bindings/usb/ci-hdrc-usb2.yaml b/dts/Bindings/usb/ci-hdrc-usb2.yaml index 782402800d..1394557517 100644 --- a/dts/Bindings/usb/ci-hdrc-usb2.yaml +++ b/dts/Bindings/usb/ci-hdrc-usb2.yaml @@ -34,6 +34,7 @@ properties: - fsl,imx23-usb - fsl,imx25-usb - fsl,imx28-usb + - fsl,imx35-usb - fsl,imx50-usb - fsl,imx51-usb - fsl,imx53-usb @@ -76,11 +77,11 @@ properties: clocks: minItems: 1 - maxItems: 2 + maxItems: 3 clock-names: minItems: 1 - maxItems: 2 + maxItems: 3 dr_mode: true @@ -167,7 +168,7 @@ properties: at RTL is 0, so this property only affects siTD. If this property is not set, the max packet size is 1023 bytes, and - if the total of packet size for pervious transactions are more than + if the total of packet size for previous transactions are more than 256 bytes, it can't accept any transactions within this frame. The use case is single transaction, but higher frame rate. @@ -292,6 +293,18 @@ properties: minimum: 0x0 maximum: 0xf + fsl,picophy-rise-fall-time-adjust: + description: + HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times + of the high-speed transmitter waveform. It has no unit. The rise/fall + time will be increased or decreased by a certain percentage relative + to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%) + Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + usb-phy: description: phandle for the PHY device. Use "phys" instead. $ref: /schemas/types.yaml#/definitions/phandle diff --git a/dts/Bindings/usb/cypress,cypd4226.yaml b/dts/Bindings/usb/cypress,cypd4226.yaml index 75eec4a9a0..89fc9a434d 100644 --- a/dts/Bindings/usb/cypress,cypd4226.yaml +++ b/dts/Bindings/usb/cypress,cypd4226.yaml @@ -43,10 +43,8 @@ properties: patternProperties: '^connector@[01]$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/dts/Bindings/usb/cypress,hx3.yaml b/dts/Bindings/usb/cypress,hx3.yaml new file mode 100644 index 0000000000..47add0d85f --- /dev/null +++ b/dts/Bindings/usb/cypress,hx3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cypress,hx3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress HX3 USB 3.0 hub controller family + +maintainers: + - Benjamin Bara <benjamin.bara@skidata.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb4b4,6504 + - usb4b4,6506 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for RESETN pin. + + vdd-supply: + description: + 1V2 power supply (VDD_EFUSE, AVDD12, DVDD12). + + vdd2-supply: + description: + 3V3 power supply (AVDD33, VDD_IO). + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + - vdd-supply + - vdd2-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; + }; + }; diff --git a/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml index 3fb4feb6d3..9ea1e4cd07 100644 --- a/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml @@ -52,7 +52,7 @@ properties: fsl,permanently-attached: type: boolean description: - Indicates if the device atached to a downstream port is + Indicates if the device attached to a downstream port is permanently attached. fsl,disable-port-power-control: diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml index b956bb5fad..87986c45be 100644 --- a/dts/Bindings/usb/generic-ehci.yaml +++ b/dts/Bindings/usb/generic-ehci.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-a83t-ehci - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci + - allwinner,sun8i-v3s-ehci - allwinner,sun9i-a80-ehci - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci @@ -67,6 +68,7 @@ properties: - const: generic-ehci - items: - enum: + - atmel,at91sam9g45-ehci - cavium,octeon-6335-ehci - ibm,usb-ehci-440epx - ibm,usb-ehci-460ex diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml index be268e23ca..b957601573 100644 --- a/dts/Bindings/usb/generic-ohci.yaml +++ b/dts/Bindings/usb/generic-ohci.yaml @@ -25,6 +25,7 @@ properties: - allwinner,sun8i-a83t-ohci - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci + - allwinner,sun8i-v3s-ohci - allwinner,sun9i-a80-ohci - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci diff --git a/dts/Bindings/usb/genesys,gl850g.yaml b/dts/Bindings/usb/genesys,gl850g.yaml index cc4cf92b70..d0927f6768 100644 --- a/dts/Bindings/usb/genesys,gl850g.yaml +++ b/dts/Bindings/usb/genesys,gl850g.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# @@ -17,6 +17,7 @@ properties: enum: - usb5e3,608 - usb5e3,610 + - usb5e3,620 reg: true diff --git a/dts/Bindings/usb/msm-hsusb.txt b/dts/Bindings/usb/msm-hsusb.txt index 8654a3ec23..afc30e98b1 100644 --- a/dts/Bindings/usb/msm-hsusb.txt +++ b/dts/Bindings/usb/msm-hsusb.txt @@ -53,7 +53,7 @@ Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual - SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + SPDT USB Switch, witch is controlled by GPIO to de/multiplex D+/D- USB lines between connectors. - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml index ae24dac78d..67591057f2 100644 --- a/dts/Bindings/usb/qcom,dwc3.yaml +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - qcom,ipq4019-dwc3 + - qcom,ipq5332-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 @@ -82,15 +83,6 @@ properties: minItems: 1 maxItems: 9 - assigned-clocks: - items: - - description: Phandle and clock specifier of MOCK_UTMI_CLK. - - description: Phandle and clock specifoer of MASTER_CLK. - - assigned-clock-rates: - items: - - description: Must be 19.2MHz (19200000). - - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. resets: maxItems: 1 @@ -246,6 +238,7 @@ allOf: compatible: contains: enum: + - qcom,ipq5332-dwc3 - qcom,msm8994-dwc3 - qcom,qcs404-dwc3 then: @@ -290,15 +283,23 @@ allOf: then: properties: clocks: - minItems: 6 + minItems: 5 + maxItems: 6 clock-names: - items: - - const: cfg_noc - - const: core - - const: iface - - const: sleep - - const: mock_utmi - - const: bus + oneOf: + - items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: bus + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + - const: bus - if: properties: @@ -410,6 +411,7 @@ allOf: compatible: contains: enum: + - qcom,ipq5332-dwc3 - qcom,sdm660-dwc3 then: properties: diff --git a/dts/Bindings/usb/realtek,rts5411.yaml b/dts/Bindings/usb/realtek,rts5411.yaml index 9309f003cd..f0784d2e86 100644 --- a/dts/Bindings/usb/realtek,rts5411.yaml +++ b/dts/Bindings/usb/realtek,rts5411.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# diff --git a/dts/Bindings/usb/richtek,rt1719.yaml b/dts/Bindings/usb/richtek,rt1719.yaml index 4ced2f68e2..07bec1fe6e 100644 --- a/dts/Bindings/usb/richtek,rt1719.yaml +++ b/dts/Bindings/usb/richtek,rt1719.yaml @@ -10,7 +10,7 @@ maintainers: - ChiYuan Huang <cy_huang@richtek.com> description: | - The RT1719 is a sink-only USB Type-C contoller that complies with the latest + The RT1719 is a sink-only USB Type-C controller that complies with the latest USB Type-C and PD standards. It does the USB Type-C detection including attach and orientation. It integrates the physical layer of the USB BMC power delivery protocol to allow up to 100W of power. The BMC PD block enables full diff --git a/dts/Bindings/usb/samsung,exynos-dwc3.yaml b/dts/Bindings/usb/samsung,exynos-dwc3.yaml index 42ceaf13cd..1ade99e85b 100644 --- a/dts/Bindings/usb/samsung,exynos-dwc3.yaml +++ b/dts/Bindings/usb/samsung,exynos-dwc3.yaml @@ -15,6 +15,7 @@ properties: - samsung,exynos5250-dwusb3 - samsung,exynos5433-dwusb3 - samsung,exynos7-dwusb3 + - samsung,exynos850-dwusb3 '#address-cells': const: 1 @@ -72,7 +73,7 @@ allOf: properties: compatible: contains: - const: samsung,exynos54333-dwusb3 + const: samsung,exynos5433-dwusb3 then: properties: clocks: @@ -82,8 +83,8 @@ allOf: items: - const: aclk - const: susp_clk - - const: pipe_pclk - const: phyclk + - const: pipe_pclk - if: properties: @@ -101,6 +102,21 @@ allOf: - const: usbdrd30_susp_clk - const: usbdrd30_axius_clk + - if: + properties: + compatible: + contains: + const: samsung,exynos850-dwusb3 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: bus_early + - const: ref + additionalProperties: false examples: diff --git a/dts/Bindings/usb/samsung-hsotg.txt b/dts/Bindings/usb/samsung-hsotg.txt deleted file mode 100644 index 0388634598..0000000000 --- a/dts/Bindings/usb/samsung-hsotg.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung High Speed USB OTG controller ------------------------------ - -The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. -It gives functionality of OTG-compliant USB 2.0 host and device with -support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) -operation. - -Currently only device mode is supported. - -Binding details ------ - -Required properties: -- compatible: "samsung,s3c6400-hsotg" should be used for all currently - supported SoC, -- interrupts: specifier of interrupt signal of interrupt controller, - according to bindings of interrupt controller, -- clocks: contains an array of clock specifiers: - - first entry: OTG clock -- clock-names: contains array of clock names: - - first entry: must be "otg" -- vusb_d-supply: phandle to voltage regulator of digital section, -- vusb_a-supply: phandle to voltage regulator of analog section. - -Example ------ - - hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; - clocks = <&clock 305>; - clock-names = "otg"; - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - }; - diff --git a/dts/Bindings/usb/ti,usb8041.yaml b/dts/Bindings/usb/ti,usb8041.yaml index 88ea6c952c..c2e29bd61e 100644 --- a/dts/Bindings/usb/ti,usb8041.yaml +++ b/dts/Bindings/usb/ti,usb8041.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# diff --git a/dts/Bindings/usb/vialab,vl817.yaml b/dts/Bindings/usb/vialab,vl817.yaml index 23a13e1d5c..76db9071b3 100644 --- a/dts/Bindings/usb/vialab,vl817.yaml +++ b/dts/Bindings/usb/vialab,vl817.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/vialab,vl817.yaml# diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml index af60bf1a66..573578db95 100644 --- a/dts/Bindings/vendor-prefixes.yaml +++ b/dts/Bindings/vendor-prefixes.yaml @@ -190,6 +190,8 @@ patternProperties: description: Compass Electronics Group, LLC "^beagle,.*": description: BeagleBoard.org Foundation + "^belling,.*": + description: Shanghai Belling Co., Ltd. "^bhf,.*": description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": @@ -617,6 +619,8 @@ patternProperties: description: Imagination Technologies Ltd. "^imi,.*": description: Integrated Micro-Electronics Inc. + "^inanbo,.*": + description: Shenzhen INANBO Electronic Technology Co., Ltd. "^incircuit,.*": description: In-Circuit GmbH "^indiedroid,.*": @@ -675,6 +679,8 @@ patternProperties: description: iWave Systems Technologies Pvt. Ltd. "^jadard,.*": description: Jadard Technology Inc. + "^jasonic,.*": + description: Jasonic Technology Ltd. "^jdi,.*": description: Japan Display Inc. "^jedec,.*": @@ -1151,6 +1157,8 @@ patternProperties: description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": description: RoseapplePi.org + "^saef,.*": + description: Saef Technology Limited "^samsung,.*": description: Samsung Semiconductor "^samtec,.*": diff --git a/dts/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/dts/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml index f5cc7aa1b9..443e2e7ab4 100644 --- a/dts/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml +++ b/dts/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - amlogic,meson-gxbb-wdt + - amlogic,t7-wdt reg: maxItems: 1 diff --git a/dts/Bindings/watchdog/marvell,cn10624-wdt.yaml b/dts/Bindings/watchdog/marvell,cn10624-wdt.yaml new file mode 100644 index 0000000000..1b583f232e --- /dev/null +++ b/dts/Bindings/watchdog/marvell,cn10624-wdt.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/marvell,cn10624-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Global Timer (GTI) system watchdog + +maintainers: + - Bharat Bhushan <bbhushan2@marvell.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - enum: + - marvell,cn9670-wdt + - marvell,cn10624-wdt + + - items: + - enum: + - marvell,cn9880-wdt + - marvell,cnf9535-wdt + - const: marvell,cn9670-wdt + + - items: + - enum: + - marvell,cn10308-wdt + - marvell,cnf10518-wdt + - const: marvell,cn10624-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: refclk + + marvell,wdt-timer-index: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + description: + An SoC have many timers (up to 64), firmware can reserve one or more timer + for some other use case and configures one of the global timer as watchdog + timer. Firmware will update this field with the timer number configured + as watchdog timer. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + watchdog@802000040000 { + compatible = "marvell,cn9670-wdt"; + reg = <0x00008020 0x00040000 0x00000000 0x00020000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>; + clocks = <&sclk>; + clock-names = "refclk"; + marvell,wdt-timer-index = <63>; + }; + }; + +... diff --git a/dts/Bindings/watchdog/qcom-wdt.yaml b/dts/Bindings/watchdog/qcom-wdt.yaml index 6d0fe6abd0..5046dfa55f 100644 --- a/dts/Bindings/watchdog/qcom-wdt.yaml +++ b/dts/Bindings/watchdog/qcom-wdt.yaml @@ -18,6 +18,7 @@ properties: - items: - enum: - qcom,kpss-wdt-ipq4019 + - qcom,apss-wdt-ipq5018 - qcom,apss-wdt-ipq5332 - qcom,apss-wdt-ipq9574 - qcom,apss-wdt-msm8994 diff --git a/dts/Bindings/watchdog/ti,rti-wdt.yaml b/dts/Bindings/watchdog/ti,rti-wdt.yaml index fc553211e4..62ddc284a5 100644 --- a/dts/Bindings/watchdog/ti,rti-wdt.yaml +++ b/dts/Bindings/watchdog/ti,rti-wdt.yaml @@ -34,6 +34,20 @@ properties: power-domains: maxItems: 1 + memory-region: + maxItems: 1 + description: + Contains the watchdog reserved memory. It is optional. + In the reserved memory, the specified values, which are + PON_REASON_SOF_NUM(0xBBBBCCCC), PON_REASON_MAGIC_NUM(0xDDDDDDDD), + and PON_REASON_EOF_NUM(0xCCCCBBBB), are pre-stored at the first + 3 * 4 bytes to tell that last boot was caused by watchdog reset. + Once the PON reason is captured by driver(rti_wdt.c), the driver + is supposed to wipe the whole memory region. Surely, if this + property is set, at least 12 bytes reserved memory starting from + specific memory address(0xa220000) should be set. More please + refer to example. + required: - compatible - reg @@ -47,7 +61,18 @@ examples: /* * RTI WDT in main domain on J721e SoC. Assigned clocks are used to * select the source clock for the watchdog, forcing it to tick with - * a 32kHz clock in this case. + * a 32kHz clock in this case. Add a reserved memory(optional) to keep + * the watchdog reset cause persistent, which was be written in 12 bytes + * starting from 0xa2200000 by RTI Watchdog Firmware, then make it + * possible to get watchdog reset cause in driver. + * + * Reserved memory should be defined as follows: + * reserved-memory { + * wdt_reset_memory_region: wdt-memory@a2200000 { + * reg = <0x00 0xa2200000 0x00 0x1000>; + * no-map; + * }; + * } */ #include <dt-bindings/soc/ti,sci_pm_domain.h> @@ -58,4 +83,5 @@ examples: power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 252 1>; assigned-clock-parents = <&k3_clks 252 5>; + memory-region = <&wdt_reset_memory_region>; }; diff --git a/dts/Bindings/watchdog/toshiba,visconti-wdt.yaml b/dts/Bindings/watchdog/toshiba,visconti-wdt.yaml index 51d03d5b08..3e9fd49d93 100644 --- a/dts/Bindings/watchdog/toshiba,visconti-wdt.yaml +++ b/dts/Bindings/watchdog/toshiba,visconti-wdt.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Toshiba Electronic Devices & Storage Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba Visconti SoCs PIUWDT Watchdog timer |