summaryrefslogtreecommitdiffstats
path: root/dts/Bindings
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings')
-rw-r--r--dts/Bindings/arm/arm,scmi.txt2
-rw-r--r--dts/Bindings/arm/arm,scpi.txt2
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm63138.txt2
-rw-r--r--dts/Bindings/arm/cpus.yaml2
-rw-r--r--dts/Bindings/arm/fsl.yaml2
-rw-r--r--dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt2
-rw-r--r--dts/Bindings/arm/msm/qcom,idle-state.txt2
-rw-r--r--dts/Bindings/arm/omap/mpu.txt2
-rw-r--r--dts/Bindings/arm/psci.yaml36
-rw-r--r--dts/Bindings/arm/stm32/st,mlahb.yaml2
-rw-r--r--dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml1
-rw-r--r--dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml2
-rw-r--r--dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml2
-rw-r--r--dts/Bindings/clock/qcom,gcc-apq8064.yaml2
-rw-r--r--dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml6
-rw-r--r--dts/Bindings/display/bridge/anx6345.yaml10
-rw-r--r--dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml2
-rw-r--r--dts/Bindings/display/panel/xinpeng,xpp055c272.yaml2
-rw-r--r--dts/Bindings/display/simple-framebuffer.yaml6
-rw-r--r--dts/Bindings/display/tilcdc/tilcdc.txt2
-rw-r--r--dts/Bindings/dma/ti/k3-udma.yaml14
-rw-r--r--dts/Bindings/gpu/arm,mali-bifrost.yaml14
-rw-r--r--dts/Bindings/gpu/arm,mali-midgard.yaml14
-rw-r--r--dts/Bindings/iio/adc/samsung,exynos-adc.yaml2
-rw-r--r--dts/Bindings/input/touchscreen/goodix.yaml2
-rw-r--r--dts/Bindings/input/twl4030-pwrbutton.txt2
-rw-r--r--dts/Bindings/leds/common.yaml2
-rw-r--r--dts/Bindings/leds/register-bit-led.txt2
-rw-r--r--dts/Bindings/media/ti,cal.yaml2
-rw-r--r--dts/Bindings/memory-controllers/ti/emif.txt2
-rw-r--r--dts/Bindings/mfd/max77650.yaml4
-rw-r--r--dts/Bindings/mfd/tps65910.txt4
-rw-r--r--dts/Bindings/mfd/twl-family.txt (renamed from dts/Bindings/mfd/twl-familly.txt)0
-rw-r--r--dts/Bindings/mfd/zii,rave-sp.txt2
-rw-r--r--dts/Bindings/misc/fsl,qoriq-mc.txt2
-rw-r--r--dts/Bindings/mmc/mmc-controller.yaml1
-rw-r--r--dts/Bindings/mtd/cadence-nand-controller.txt2
-rw-r--r--dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt2
-rw-r--r--dts/Bindings/nvmem/nvmem.yaml2
-rw-r--r--dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml2
-rw-r--r--dts/Bindings/pinctrl/st,stm32-pinctrl.yaml2
-rw-r--r--dts/Bindings/power/amlogic,meson-ee-pwrc.yaml2
-rw-r--r--dts/Bindings/power/domain-idle-state.txt33
-rw-r--r--dts/Bindings/power/domain-idle-state.yaml64
-rw-r--r--dts/Bindings/power/power-domain.yaml24
-rw-r--r--dts/Bindings/power/power_domain.txt2
-rw-r--r--dts/Bindings/regulator/qcom,spmi-regulator.txt2
-rw-r--r--dts/Bindings/regulator/regulator.yaml2
-rw-r--r--dts/Bindings/reset/intel,rcu-gw.yaml6
-rw-r--r--dts/Bindings/reset/st,stm32mp1-rcc.txt2
-rw-r--r--dts/Bindings/sound/st,stm32-sai.txt2
-rw-r--r--dts/Bindings/sound/st,stm32-spdifrx.txt2
-rw-r--r--dts/Bindings/spi/st,stm32-spi.yaml2
-rw-r--r--dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml2
-rw-r--r--dts/Bindings/thermal/brcm,avs-ro-thermal.yaml2
-rw-r--r--dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml2
59 files changed, 167 insertions, 156 deletions
diff --git a/dts/Bindings/arm/arm,scmi.txt b/dts/Bindings/arm/arm,scmi.txt
index f493d69e61..dc102c4e4a 100644
--- a/dts/Bindings/arm/arm,scmi.txt
+++ b/dts/Bindings/arm/arm,scmi.txt
@@ -102,7 +102,7 @@ Required sub-node properties:
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/power/power-domain.yaml
[3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
[5] Documentation/devicetree/bindings/reset/reset.txt
Example:
diff --git a/dts/Bindings/arm/arm,scpi.txt b/dts/Bindings/arm/arm,scpi.txt
index 7b83ef43b4..dd04d9d9a1 100644
--- a/dts/Bindings/arm/arm,scpi.txt
+++ b/dts/Bindings/arm/arm,scpi.txt
@@ -109,7 +109,7 @@ Required properties:
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
[4] Documentation/devicetree/bindings/power/power-domain.yaml
Example:
diff --git a/dts/Bindings/arm/bcm/brcm,bcm63138.txt b/dts/Bindings/arm/bcm/brcm,bcm63138.txt
index b82b6a0ae6..8c7a4908a8 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm63138.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm63138.txt
@@ -62,7 +62,7 @@ Timer node:
Syscon reboot node:
-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
detailed list of properties, the two values defined below are specific to the
BCM6328-style timer:
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml
index 7a9c3ce2db..0d5b61056b 100644
--- a/dts/Bindings/arm/cpus.yaml
+++ b/dts/Bindings/arm/cpus.yaml
@@ -216,7 +216,7 @@ properties:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
description: |
List of phandles to idle state nodes supported
- by this cpu (see ./idle-states.txt).
+ by this cpu (see ./idle-states.yaml).
capacity-dmips-mhz:
$ref: '/schemas/types.yaml#/definitions/uint32'
diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml
index a8e0b4a813..0e17e1f6fb 100644
--- a/dts/Bindings/arm/fsl.yaml
+++ b/dts/Bindings/arm/fsl.yaml
@@ -160,7 +160,7 @@ properties:
items:
- enum:
- armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+ - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board
- eckelmann,imx6dl-ci4x10
- emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM
- emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base
diff --git a/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
index 115c5be0bd..8defacc44d 100644
--- a/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
+++ b/dts/Bindings/arm/hisilicon/hi3519-sysctrl.txt
@@ -1,7 +1,7 @@
* Hisilicon Hi3519 System Controller Block
This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
Required properties:
- compatible: "hisilicon,hi3519-sysctrl".
diff --git a/dts/Bindings/arm/msm/qcom,idle-state.txt b/dts/Bindings/arm/msm/qcom,idle-state.txt
index 06df04cc82..6ce0b212ec 100644
--- a/dts/Bindings/arm/msm/qcom,idle-state.txt
+++ b/dts/Bindings/arm/msm/qcom,idle-state.txt
@@ -81,4 +81,4 @@ Example:
};
};
-[1]. Documentation/devicetree/bindings/arm/idle-states.txt
+[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
diff --git a/dts/Bindings/arm/omap/mpu.txt b/dts/Bindings/arm/omap/mpu.txt
index f301e636fd..e41490e697 100644
--- a/dts/Bindings/arm/omap/mpu.txt
+++ b/dts/Bindings/arm/omap/mpu.txt
@@ -17,7 +17,7 @@ am335x and am437x only:
- pm-sram: Phandles to ocmcram nodes to be used for power management.
First should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
- data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+ data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Examples:
diff --git a/dts/Bindings/arm/psci.yaml b/dts/Bindings/arm/psci.yaml
index 8ef85420b2..5e66934455 100644
--- a/dts/Bindings/arm/psci.yaml
+++ b/dts/Bindings/arm/psci.yaml
@@ -100,13 +100,14 @@ properties:
bindings in [1]) must specify this property.
[1] Kernel documentation - ARM idle states bindings
- Documentation/devicetree/bindings/arm/idle-states.txt
-
- "#power-domain-cells":
- description:
- The number of cells in a PM domain specifier as per binding in [3].
- Must be 0 as to represent a single PM domain.
+ Documentation/devicetree/bindings/arm/idle-states.yaml
+patternProperties:
+ "^power-domain-":
+ allOf:
+ - $ref: "../power/power-domain.yaml#"
+ type: object
+ description: |
ARM systems can have multiple cores, sometimes in an hierarchical
arrangement. This often, but not always, maps directly to the processor
power topology of the system. Individual nodes in a topology have their
@@ -122,14 +123,8 @@ properties:
helps to implement support for OSI mode and OS implementations may choose
to mandate it.
- [3] Documentation/devicetree/bindings/power/power_domain.txt
- [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
-
- power-domains:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
- description:
- List of phandles and PM domain specifiers, as defined by bindings of the
- PM domain provider.
+ [3] Documentation/devicetree/bindings/power/power-domain.yaml
+ [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
required:
- compatible
@@ -199,7 +194,7 @@ examples:
CPU0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
power-domains = <&CPU_PD0>;
@@ -208,7 +203,7 @@ examples:
CPU1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a57", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
power-domains = <&CPU_PD1>;
@@ -224,6 +219,9 @@ examples:
exit-latency-us = <10>;
min-residency-us = <100>;
};
+ };
+
+ domain-idle-states {
CLUSTER_RET: cluster-retention {
compatible = "domain-idle-state";
@@ -247,19 +245,19 @@ examples:
compatible = "arm,psci-1.0";
method = "smc";
- CPU_PD0: cpu-pd0 {
+ CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
- CPU_PD1: cpu-pd1 {
+ CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
- CLUSTER_PD: cluster-pd {
+ CLUSTER_PD: power-domain-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
};
diff --git a/dts/Bindings/arm/stm32/st,mlahb.yaml b/dts/Bindings/arm/stm32/st,mlahb.yaml
index 68917bb7c7..55f7938c48 100644
--- a/dts/Bindings/arm/stm32/st,mlahb.yaml
+++ b/dts/Bindings/arm/stm32/st,mlahb.yaml
@@ -52,7 +52,7 @@ required:
examples:
- |
- mlahb: ahb {
+ mlahb: ahb@38000000 {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 9fe11ceecd..8097361934 100644
--- a/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -70,7 +70,6 @@ examples:
#size-cells = <0>;
pmic@3e3 {
- compatible = "...";
reg = <0x3e3>;
/* ... */
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index 69cfa4a3d5..c604822cda 100644
--- a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -40,7 +40,7 @@ additionalProperties: false
examples:
- |
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 07f38def7d..43963c3062 100644
--- a/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
examples:
- |
- clk@0600005c {
+ clk@600005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;
diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
index 17f87178f6..3647007f82 100644
--- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -42,7 +42,7 @@ properties:
be part of GCC and hence the TSENS properties can also be part
of the GCC/clock-controller node.
For more details on the TSENS properties please refer
- Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+ Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
nvmem-cell-names:
minItems: 1
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 5d5d396651..6009324be9 100644
--- a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -49,11 +49,7 @@ examples:
resets = <&tcon_ch0_clk 0>;
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
+ tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
diff --git a/dts/Bindings/display/bridge/anx6345.yaml b/dts/Bindings/display/bridge/anx6345.yaml
index 6d72b3d11f..c211038699 100644
--- a/dts/Bindings/display/bridge/anx6345.yaml
+++ b/dts/Bindings/display/bridge/anx6345.yaml
@@ -79,21 +79,15 @@ examples:
#size-cells = <0>;
anx6345_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- anx6345_in_tcon0: endpoint@0 {
- reg = <0>;
+ anx6345_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
};
anx6345_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- anx6345_out_panel: endpoint@0 {
- reg = <0>;
+ anx6345_out_panel: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
diff --git a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index 4ebcea7d0c..a614644c98 100644
--- a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "leadtek,ltk500hd1829";
reg = <0>;
diff --git a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
index 186e5e1c8f..22c91beb05 100644
--- a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "xinpeng,xpp055c272";
reg = <0>;
diff --git a/dts/Bindings/display/simple-framebuffer.yaml b/dts/Bindings/display/simple-framebuffer.yaml
index 678776b601..1db608c9ee 100644
--- a/dts/Bindings/display/simple-framebuffer.yaml
+++ b/dts/Bindings/display/simple-framebuffer.yaml
@@ -174,10 +174,6 @@ examples:
};
};
- soc@1c00000 {
- lcdc0: lcdc@1c0c000 {
- compatible = "allwinner,sun4i-a10-lcdc";
- };
- };
+ lcdc0: lcdc { };
...
diff --git a/dts/Bindings/display/tilcdc/tilcdc.txt b/dts/Bindings/display/tilcdc/tilcdc.txt
index 7bf1bb4448..aac617acb6 100644
--- a/dts/Bindings/display/tilcdc/tilcdc.txt
+++ b/dts/Bindings/display/tilcdc/tilcdc.txt
@@ -37,7 +37,7 @@ Optional nodes:
supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
- Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+ Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
tfp410 DVI encoder or lcd panel to lcdc
[1] There is an errata about AM335x color wiring. For 16-bit color mode
diff --git a/dts/Bindings/dma/ti/k3-udma.yaml b/dts/Bindings/dma/ti/k3-udma.yaml
index 8b5c346f23..34780d7535 100644
--- a/dts/Bindings/dma/ti/k3-udma.yaml
+++ b/dts/Bindings/dma/ti/k3-udma.yaml
@@ -143,7 +143,7 @@ examples:
#size-cells = <2>;
dma-coherent;
dma-ranges;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
ti,sci-dev-id = <118>;
@@ -169,16 +169,4 @@ examples:
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
};
};
-
- mcasp0: mcasp@02B00000 {
- dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
- dma-names = "tx", "rx";
- };
-
- crypto: crypto@4E00000 {
- compatible = "ti,sa2ul-crypto";
-
- dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
- dma-names = "tx", "rx1", "rx2";
- };
};
diff --git a/dts/Bindings/gpu/arm,mali-bifrost.yaml b/dts/Bindings/gpu/arm,mali-bifrost.yaml
index 4ea6a87896..e8b99adcb1 100644
--- a/dts/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/dts/Bindings/gpu/arm,mali-bifrost.yaml
@@ -84,31 +84,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/dts/Bindings/gpu/arm,mali-midgard.yaml b/dts/Bindings/gpu/arm,mali-midgard.yaml
index 36f59b3ade..8d966f3ff3 100644
--- a/dts/Bindings/gpu/arm,mali-midgard.yaml
+++ b/dts/Bindings/gpu/arm,mali-midgard.yaml
@@ -138,31 +138,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
index f46de17c08..cc3c8ea6a8 100644
--- a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml
@@ -123,7 +123,7 @@ examples:
samsung,syscon-phandle = <&pmu_system_controller>;
/* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
+ ncp15wb473 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml
index d7c3262b24..c99ed3934d 100644
--- a/dts/Bindings/input/touchscreen/goodix.yaml
+++ b/dts/Bindings/input/touchscreen/goodix.yaml
@@ -62,7 +62,7 @@ required:
examples:
- |
- i2c@00000000 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
gt928@5d {
diff --git a/dts/Bindings/input/twl4030-pwrbutton.txt b/dts/Bindings/input/twl4030-pwrbutton.txt
index c864a46cdd..f5021214ed 100644
--- a/dts/Bindings/input/twl4030-pwrbutton.txt
+++ b/dts/Bindings/input/twl4030-pwrbutton.txt
@@ -1,7 +1,7 @@
Texas Instruments TWL family (twl4030) pwrbutton module
This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
This module provides a simple power button event via an Interrupt.
diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml
index d97d099b87..c60b994fe1 100644
--- a/dts/Bindings/leds/common.yaml
+++ b/dts/Bindings/leds/common.yaml
@@ -85,7 +85,7 @@ properties:
# LED will act as a back-light, controlled by the framebuffer system
- backlight
# LED will turn on (but for leds-gpio see "default-state" property in
- # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+ # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
- default-on
# LED "double" flashes at a load average based rate
- heartbeat
diff --git a/dts/Bindings/leds/register-bit-led.txt b/dts/Bindings/leds/register-bit-led.txt
index cf1ea403ba..c7af6f70a9 100644
--- a/dts/Bindings/leds/register-bit-led.txt
+++ b/dts/Bindings/leds/register-bit-led.txt
@@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a
single LED. The register bit LEDs appear as children to the
syscon device, with the proper compatible string. For the
syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
Each LED is represented as a sub-node of the syscon device. Each
node's name represents the name of the corresponding LED.
diff --git a/dts/Bindings/media/ti,cal.yaml b/dts/Bindings/media/ti,cal.yaml
index 1ea7841795..5e06662928 100644
--- a/dts/Bindings/media/ti,cal.yaml
+++ b/dts/Bindings/media/ti,cal.yaml
@@ -177,7 +177,7 @@ examples:
};
};
- i2c5: i2c@4807c000 {
+ i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/Bindings/memory-controllers/ti/emif.txt b/dts/Bindings/memory-controllers/ti/emif.txt
index 44d71469c9..63f674ffeb 100644
--- a/dts/Bindings/memory-controllers/ti/emif.txt
+++ b/dts/Bindings/memory-controllers/ti/emif.txt
@@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372":
- sram : Phandles for generic sram driver nodes,
first should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
- data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+ data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Optional properties:
diff --git a/dts/Bindings/mfd/max77650.yaml b/dts/Bindings/mfd/max77650.yaml
index 4a70f875a6..4803857893 100644
--- a/dts/Bindings/mfd/max77650.yaml
+++ b/dts/Bindings/mfd/max77650.yaml
@@ -97,14 +97,14 @@ examples:
regulators {
compatible = "maxim,max77650-regulator";
- max77650_ldo: regulator@0 {
+ max77650_ldo: regulator-ldo {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};
- max77650_sbb0: regulator@1 {
+ max77650_sbb0: regulator-sbb0 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;
diff --git a/dts/Bindings/mfd/tps65910.txt b/dts/Bindings/mfd/tps65910.txt
index 4f62143afd..a5ced46bbd 100644
--- a/dts/Bindings/mfd/tps65910.txt
+++ b/dts/Bindings/mfd/tps65910.txt
@@ -26,8 +26,8 @@ Required properties:
ldo6, ldo7, ldo8
- xxx-supply: Input voltage supply regulator.
- These entries are require if regulators are enabled for a device. Missing of these
- properties can cause the regulator registration fails.
+ These entries are required if regulators are enabled for a device. Missing these
+ properties can cause the regulator registration to fail.
If some of input supply is powered through battery or always-on supply then
also it is require to have these parameters with proper node handle of always
on power supply.
diff --git a/dts/Bindings/mfd/twl-familly.txt b/dts/Bindings/mfd/twl-family.txt
index 56f244b5d8..56f244b5d8 100644
--- a/dts/Bindings/mfd/twl-familly.txt
+++ b/dts/Bindings/mfd/twl-family.txt
diff --git a/dts/Bindings/mfd/zii,rave-sp.txt b/dts/Bindings/mfd/zii,rave-sp.txt
index 088eff9ddb..e0f901edc0 100644
--- a/dts/Bindings/mfd/zii,rave-sp.txt
+++ b/dts/Bindings/mfd/zii,rave-sp.txt
@@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices:
Device Description
------ -----------
rave-sp-wdt : Watchdog
-rave-sp-nvmem : Interface to onborad EEPROM
+rave-sp-nvmem : Interface to onboard EEPROM
rave-sp-backlight : Display backlight
rave-sp-hwmon : Interface to onboard hardware sensors
rave-sp-leds : Interface to onboard LEDs
diff --git a/dts/Bindings/misc/fsl,qoriq-mc.txt b/dts/Bindings/misc/fsl,qoriq-mc.txt
index bb7e896cb6..9134e9bcca 100644
--- a/dts/Bindings/misc/fsl,qoriq-mc.txt
+++ b/dts/Bindings/misc/fsl,qoriq-mc.txt
@@ -26,7 +26,7 @@ For generic IOMMU bindings, see
Documentation/devicetree/bindings/iommu/iommu.txt.
For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
Required properties:
diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml
index 3c0df4016a..8fded83c51 100644
--- a/dts/Bindings/mmc/mmc-controller.yaml
+++ b/dts/Bindings/mmc/mmc-controller.yaml
@@ -370,6 +370,7 @@ examples:
mmc3: mmc@1c12000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vmmc3>;
diff --git a/dts/Bindings/mtd/cadence-nand-controller.txt b/dts/Bindings/mtd/cadence-nand-controller.txt
index f3893c4d3c..d2eada5044 100644
--- a/dts/Bindings/mtd/cadence-nand-controller.txt
+++ b/dts/Bindings/mtd/cadence-nand-controller.txt
@@ -27,7 +27,7 @@ Required properties of NAND chips:
- reg: shall contain the native Chip Select ids from 0 to max supported by
the cadence nand flash controller
-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.
Example:
diff --git a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
index 48a7f916c5..88b57b0ca1 100644
--- a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -45,7 +45,7 @@ Optional properties:
switch queue
- resets: a single phandle and reset identifier pair. See
- Documentation/devicetree/binding/reset/reset.txt for details.
+ Documentation/devicetree/bindings/reset/reset.txt for details.
- reset-names: If the "reset" property is specified, this property should have
the value "switch" to denote the switch reset line.
diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml
index b43c6c6529..65980224d5 100644
--- a/dts/Bindings/nvmem/nvmem.yaml
+++ b/dts/Bindings/nvmem/nvmem.yaml
@@ -76,6 +76,8 @@ examples:
qfprom: eeprom@700000 {
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x00700000 0x100000>;
+
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
/* ... */
diff --git a/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 020ef9e4c4..94ac23687b 100644
--- a/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -86,7 +86,7 @@ examples:
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index bb690e20c3..135c7dfbc1 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
"aspeed,ast2400-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index f7f5d57f2c..824f7fd1d5 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -18,7 +18,7 @@ description: |+
"aspeed,g5-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 3749fa233e..ac8d1c30a8 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
"aspeed,ast2600-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index 754ea7ab04..ef4de32cb1 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -248,7 +248,7 @@ examples:
};
//Example 3 pin groups
- pinctrl@60020000 {
+ pinctrl {
usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>;
diff --git a/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml b/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
index aab70e8b68..d3098c924b 100644
--- a/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/dts/Bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -18,7 +18,7 @@ description: |+
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/power/domain-idle-state.txt b/dts/Bindings/power/domain-idle-state.txt
deleted file mode 100644
index eefc7ed22c..0000000000
--- a/dts/Bindings/power/domain-idle-state.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-PM Domain Idle State Node:
-
-A domain idle state node represents the state parameters that will be used to
-select the state when there are no active components in the domain.
-
-The state node has the following parameters -
-
-- compatible:
- Usage: Required
- Value type: <string>
- Definition: Must be "domain-idle-state".
-
-- entry-latency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing worst case latency in
- microseconds required to enter the idle state.
- The exit-latency-us duration may be guaranteed
- only after entry-latency-us has passed.
-
-- exit-latency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing worst case latency
- in microseconds required to exit the idle state.
-
-- min-residency-us
- Usage: Required
- Value type: <prop-encoded-array>
- Definition: u32 value representing minimum residency duration
- in microseconds after which the idle state will yield
- power benefits after overcoming the overhead in entering
-i the idle state.
diff --git a/dts/Bindings/power/domain-idle-state.yaml b/dts/Bindings/power/domain-idle-state.yaml
new file mode 100644
index 0000000000..dfba1af9ab
--- /dev/null
+++ b/dts/Bindings/power/domain-idle-state.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States binding description
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ A domain idle state node represents the state parameters that will be used to
+ select the state when there are no active components in the PM domain.
+
+properties:
+ $nodename:
+ const: domain-idle-states
+
+patternProperties:
+ "^(cpu|cluster|domain)-":
+ type: object
+ description:
+ Each state node represents a domain idle state description.
+
+ properties:
+ compatible:
+ const: domain-idle-state
+
+ entry-latency-us:
+ description:
+ The worst case latency in microseconds required to enter the idle
+ state. Note that, the exit-latency-us duration may be guaranteed only
+ after the entry-latency-us has passed.
+
+ exit-latency-us:
+ description:
+ The worst case latency in microseconds required to exit the idle
+ state.
+
+ min-residency-us:
+ description:
+ The minimum residency duration in microseconds after which the idle
+ state will yield power benefits, after overcoming the overhead while
+ entering the idle state.
+
+ required:
+ - compatible
+ - entry-latency-us
+ - exit-latency-us
+ - min-residency-us
+
+examples:
+ - |
+
+ domain-idle-states {
+ domain_retention: domain-retention {
+ compatible = "domain-idle-state";
+ entry-latency-us = <20>;
+ exit-latency-us = <40>;
+ min-residency-us = <80>;
+ };
+ };
+...
diff --git a/dts/Bindings/power/power-domain.yaml b/dts/Bindings/power/power-domain.yaml
index 455b573293..6047aacd77 100644
--- a/dts/Bindings/power/power-domain.yaml
+++ b/dts/Bindings/power/power-domain.yaml
@@ -25,22 +25,20 @@ description: |+
properties:
$nodename:
- pattern: "^(power-controller|power-domain)(@.*)?$"
+ pattern: "^(power-controller|power-domain)([@-].*)?$"
domain-idle-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
- description:
- A phandle of an idle-state that shall be soaked into a generic domain
- power state. The idle state definitions are compatible with
- domain-idle-state specified in
- Documentation/devicetree/bindings/power/domain-idle-state.txt
- phandles that are not compatible with domain-idle-state will be ignored.
- The domain-idle-state property reflects the idle state of this PM domain
- and not the idle states of the devices or sub-domains in the PM domain.
- Devices and sub-domains have their own idle-states independent
- of the parent domain's idle states. In the absence of this property,
- the domain would be considered as capable of being powered-on
- or powered-off.
+ description: |
+ Phandles of idle states that defines the available states for the
+ power-domain provider. The idle state definitions are compatible with the
+ domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+ Note that, the domain-idle-state property reflects the idle states of this
+ PM domain and not the idle states of the devices or sub-domains in the PM
+ domain. Devices and sub-domains have their own idle states independent of
+ the parent domain's idle states. In the absence of this property, the
+ domain would be considered as capable of being powered-on or powered-off.
operating-points-v2:
$ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/dts/Bindings/power/power_domain.txt b/dts/Bindings/power/power_domain.txt
index 5b09b2deb4..08497ef26c 100644
--- a/dts/Bindings/power/power_domain.txt
+++ b/dts/Bindings/power/power_domain.txt
@@ -109,4 +109,4 @@ Example:
required-opps = <&domain1_opp_1>;
};
-[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml
diff --git a/dts/Bindings/regulator/qcom,spmi-regulator.txt b/dts/Bindings/regulator/qcom,spmi-regulator.txt
index f5cdac8b28..8b005192f6 100644
--- a/dts/Bindings/regulator/qcom,spmi-regulator.txt
+++ b/dts/Bindings/regulator/qcom,spmi-regulator.txt
@@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the PMICs below.
-pm8005:
+pm8004:
s2, s5
pm8005:
diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml
index 92ff2e8ad5..91a39a3300 100644
--- a/dts/Bindings/regulator/regulator.yaml
+++ b/dts/Bindings/regulator/regulator.yaml
@@ -191,7 +191,7 @@ patternProperties:
examples:
- |
- xyzreg: regulator@0 {
+ xyzreg: regulator {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
diff --git a/dts/Bindings/reset/intel,rcu-gw.yaml b/dts/Bindings/reset/intel,rcu-gw.yaml
index 246dea8a2e..8ac4372826 100644
--- a/dts/Bindings/reset/intel,rcu-gw.yaml
+++ b/dts/Bindings/reset/intel,rcu-gw.yaml
@@ -23,7 +23,11 @@ properties:
description: Global reset register offset and bit offset.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- - maxItems: 2
+ items:
+ - description: Register offset
+ - description: Register bit offset
+ minimum: 0
+ maximum: 31
"#reset-cells":
minimum: 2
diff --git a/dts/Bindings/reset/st,stm32mp1-rcc.txt b/dts/Bindings/reset/st,stm32mp1-rcc.txt
index b4edaf7c7f..2880d5dda9 100644
--- a/dts/Bindings/reset/st,stm32mp1-rcc.txt
+++ b/dts/Bindings/reset/st,stm32mp1-rcc.txt
@@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller
The RCC IP is both a reset and a clock controller.
-Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
diff --git a/dts/Bindings/sound/st,stm32-sai.txt b/dts/Bindings/sound/st,stm32-sai.txt
index 944743dd92..c42b91e525 100644
--- a/dts/Bindings/sound/st,stm32-sai.txt
+++ b/dts/Bindings/sound/st,stm32-sai.txt
@@ -36,7 +36,7 @@ SAI subnodes required properties:
- clock-names: Must contain "sai_ck".
Must also contain "MCLK", if SAI shares a master clock,
with a SAI set as MCLK clock provider.
- - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+ - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
diff --git a/dts/Bindings/sound/st,stm32-spdifrx.txt b/dts/Bindings/sound/st,stm32-spdifrx.txt
index 33826f2459..ca9101777c 100644
--- a/dts/Bindings/sound/st,stm32-spdifrx.txt
+++ b/dts/Bindings/sound/st,stm32-spdifrx.txt
@@ -10,7 +10,7 @@ Required properties:
- clock-names: must contain "kclk"
- interrupts: cpu DAI interrupt line
- dmas: DMA specifiers for audio data DMA and iec control flow DMA
- See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+ See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
Optional properties:
diff --git a/dts/Bindings/spi/st,stm32-spi.yaml b/dts/Bindings/spi/st,stm32-spi.yaml
index f0d979664f..e49ecbf715 100644
--- a/dts/Bindings/spi/st,stm32-spi.yaml
+++ b/dts/Bindings/spi/st,stm32-spi.yaml
@@ -49,7 +49,7 @@ properties:
dmas:
description: |
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
- the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
items:
- description: rx DMA channel
- description: tx DMA channel
diff --git a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 80bac7a182..4b55094365 100644
--- a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -125,7 +125,7 @@ examples:
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
diff --git a/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
index d9fdf4809a..f3e68ed03a 100644
--- a/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -17,7 +17,7 @@ description: |+
"brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
Refer to the the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.txt
+ Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:
diff --git a/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml b/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
index 23e989e097..d918cee100 100644
--- a/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/dts/Bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -87,7 +87,7 @@ additionalProperties: false
examples:
- |
- timer {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>,