summaryrefslogtreecommitdiffstats
path: root/dts/Bindings
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings')
-rw-r--r--dts/Bindings/arm/ccn.txt2
-rw-r--r--dts/Bindings/arm/omap/crossbar.txt2
-rw-r--r--dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt2
-rw-r--r--dts/Bindings/clock/axi-clkgen.txt2
-rw-r--r--dts/Bindings/clock/brcm,bcm2835-aux-clock.txt2
-rw-r--r--dts/Bindings/clock/exynos4-clock.txt2
-rw-r--r--dts/Bindings/clock/exynos5250-clock.txt2
-rw-r--r--dts/Bindings/clock/exynos5410-clock.txt2
-rw-r--r--dts/Bindings/clock/exynos5420-clock.txt2
-rw-r--r--dts/Bindings/clock/exynos5440-clock.txt2
-rw-r--r--dts/Bindings/clock/ti-keystone-pllctrl.txt2
-rw-r--r--dts/Bindings/clock/zx296702-clk.txt4
-rw-r--r--dts/Bindings/crypto/fsl-sec4.txt4
-rw-r--r--dts/Bindings/devfreq/event/rockchip-dfi.txt2
-rw-r--r--dts/Bindings/display/atmel,lcdc.txt4
-rw-r--r--dts/Bindings/dma/qcom_hidma_mgmt.txt4
-rw-r--r--dts/Bindings/dma/zxdma.txt2
-rw-r--r--dts/Bindings/eeprom/at25.txt13
-rw-r--r--dts/Bindings/gpio/gpio-altera.txt2
-rw-r--r--dts/Bindings/gpio/gpio-pca953x.txt2
-rw-r--r--dts/Bindings/i2c/i2c-jz4780.txt2
-rw-r--r--dts/Bindings/iio/pressure/hp03.txt2
-rw-r--r--dts/Bindings/input/touchscreen/bu21013.txt2
-rw-r--r--dts/Bindings/interrupt-controller/arm,gic.txt4
-rw-r--r--dts/Bindings/interrupt-controller/img,meta-intc.txt2
-rw-r--r--dts/Bindings/interrupt-controller/img,pdc-intc.txt2
-rw-r--r--dts/Bindings/interrupt-controller/st,spear3xx-shirq.txt2
-rw-r--r--dts/Bindings/mailbox/altera-mailbox.txt6
-rw-r--r--dts/Bindings/mailbox/brcm,iproc-pdc-mbox.txt2
-rw-r--r--dts/Bindings/media/exynos5-gsc.txt2
-rw-r--r--dts/Bindings/media/mediatek-vcodec.txt2
-rw-r--r--dts/Bindings/media/rcar_vin.txt2
-rw-r--r--dts/Bindings/media/samsung-fimc.txt2
-rw-r--r--dts/Bindings/media/sh_mobile_ceu.txt2
-rw-r--r--dts/Bindings/media/video-interfaces.txt10
-rw-r--r--dts/Bindings/memory-controllers/ti/emif.txt2
-rw-r--r--dts/Bindings/mfd/ti-keystone-devctrl.txt2
-rw-r--r--dts/Bindings/misc/brcm,kona-smc.txt2
-rw-r--r--dts/Bindings/mmc/brcm,kona-sdhci.txt2
-rw-r--r--dts/Bindings/mmc/brcm,sdhci-iproc.txt2
-rw-r--r--dts/Bindings/mmc/ti-omap-hsmmc.txt4
-rw-r--r--dts/Bindings/mtd/gpmc-nor.txt6
-rw-r--r--dts/Bindings/mtd/mtk-nand.txt2
-rw-r--r--dts/Bindings/net/altera_tse.txt4
-rw-r--r--dts/Bindings/net/mdio.txt2
-rw-r--r--dts/Bindings/net/socfpga-dwmac.txt2
-rw-r--r--dts/Bindings/nios2/nios2.txt2
-rw-r--r--dts/Bindings/pci/altera-pcie.txt2
-rw-r--r--dts/Bindings/pci/fsl,imx6q-pcie.txt2
-rw-r--r--dts/Bindings/pci/hisilicon-pcie.txt2
-rw-r--r--dts/Bindings/phy/sun4i-usb-phy.txt2
-rw-r--r--dts/Bindings/pinctrl/brcm,cygnus-pinmux.txt2
-rw-r--r--dts/Bindings/pinctrl/pinctrl-atlas7.txt4
-rw-r--r--dts/Bindings/pinctrl/pinctrl-sirf.txt2
-rw-r--r--dts/Bindings/pinctrl/rockchip,pinctrl.txt4
-rw-r--r--dts/Bindings/regulator/regulator.txt2
-rw-r--r--dts/Bindings/serial/efm32-uart.txt2
-rw-r--r--dts/Bindings/serio/allwinner,sun4i-ps2.txt2
-rw-r--r--dts/Bindings/soc/ti/keystone-navigator-qmss.txt2
-rw-r--r--dts/Bindings/sound/adi,axi-i2s.txt2
-rw-r--r--dts/Bindings/sound/adi,axi-spdif-tx.txt2
-rw-r--r--dts/Bindings/sound/ak4613.txt2
-rw-r--r--dts/Bindings/sound/ak4642.txt2
-rw-r--r--dts/Bindings/sound/max98371.txt2
-rw-r--r--dts/Bindings/sound/max9867.txt2
-rw-r--r--dts/Bindings/sound/renesas,fsi.txt2
-rw-r--r--dts/Bindings/sound/rockchip-spdif.txt2
-rw-r--r--dts/Bindings/sound/st,sti-asoc-card.txt8
-rw-r--r--dts/Bindings/spi/efm32-spi.txt2
-rw-r--r--dts/Bindings/thermal/thermal.txt12
-rw-r--r--dts/Bindings/ufs/ufs-qcom.txt4
-rw-r--r--dts/Bindings/ufs/ufshcd-pltfrm.txt2
-rw-r--r--dts/Bindings/usb/am33xx-usb.txt2
-rw-r--r--dts/Bindings/usb/ehci-st.txt2
-rw-r--r--dts/Bindings/usb/ohci-st.txt2
-rw-r--r--dts/Bindings/watchdog/ingenic,jz4740-wdt.txt2
76 files changed, 111 insertions, 104 deletions
diff --git a/dts/Bindings/arm/ccn.txt b/dts/Bindings/arm/ccn.txt
index 2980145..43b5a71 100644
--- a/dts/Bindings/arm/ccn.txt
+++ b/dts/Bindings/arm/ccn.txt
@@ -15,7 +15,7 @@ Required properties:
Example:
- ccn@0x2000000000 {
+ ccn@2000000000 {
compatible = "arm,ccn-504";
reg = <0x20 0x00000000 0 0x1000000>;
interrupts = <0 181 4>;
diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt
index bb5727a..ecb360e 100644
--- a/dts/Bindings/arm/omap/crossbar.txt
+++ b/dts/Bindings/arm/omap/crossbar.txt
@@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
Example:
- device_x@0x4a023000 {
+ device_x@4a023000 {
/* Crossbar 8 used */
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt
index 866d934..f9632ba 100644
--- a/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt
+++ b/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -8,7 +8,7 @@ Required properties:
- interrupts : Should contain MC General interrupt.
Example:
- memory-controller@0x7000f000 {
+ memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
diff --git a/dts/Bindings/clock/axi-clkgen.txt b/dts/Bindings/clock/axi-clkgen.txt
index fb40da3..aca94fe 100644
--- a/dts/Bindings/clock/axi-clkgen.txt
+++ b/dts/Bindings/clock/axi-clkgen.txt
@@ -17,7 +17,7 @@ Optional properties:
- clock-output-names : From common clock binding.
Example:
- clock@0xff000000 {
+ clock@ff000000 {
compatible = "adi,axi-clkgen";
#clock-cells = <0>;
reg = <0xff000000 0x1000>;
diff --git a/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt b/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt
index 7a837d2..4acfc8f 100644
--- a/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt
+++ b/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -23,7 +23,7 @@ Example:
clocks = <&clk_osc>;
};
- aux: aux@0x7e215004 {
+ aux: aux@7e215004 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
diff --git a/dts/Bindings/clock/exynos4-clock.txt b/dts/Bindings/clock/exynos4-clock.txt
index bc61c95..17bb113 100644
--- a/dts/Bindings/clock/exynos4-clock.txt
+++ b/dts/Bindings/clock/exynos4-clock.txt
@@ -24,7 +24,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
- clock: clock-controller@0x10030000 {
+ clock: clock-controller@10030000 {
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;
diff --git a/dts/Bindings/clock/exynos5250-clock.txt b/dts/Bindings/clock/exynos5250-clock.txt
index 536eacd..aff266a 100644
--- a/dts/Bindings/clock/exynos5250-clock.txt
+++ b/dts/Bindings/clock/exynos5250-clock.txt
@@ -22,7 +22,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
- clock: clock-controller@0x10010000 {
+ clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
diff --git a/dts/Bindings/clock/exynos5410-clock.txt b/dts/Bindings/clock/exynos5410-clock.txt
index 4527de3..c68b0d2 100644
--- a/dts/Bindings/clock/exynos5410-clock.txt
+++ b/dts/Bindings/clock/exynos5410-clock.txt
@@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
#clock-cells = <0>;
};
- clock: clock-controller@0x10010000 {
+ clock: clock-controller@10010000 {
compatible = "samsung,exynos5410-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
diff --git a/dts/Bindings/clock/exynos5420-clock.txt b/dts/Bindings/clock/exynos5420-clock.txt
index d54f42c..717a7b1 100644
--- a/dts/Bindings/clock/exynos5420-clock.txt
+++ b/dts/Bindings/clock/exynos5420-clock.txt
@@ -23,7 +23,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
- clock: clock-controller@0x10010000 {
+ clock: clock-controller@10010000 {
compatible = "samsung,exynos5420-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
diff --git a/dts/Bindings/clock/exynos5440-clock.txt b/dts/Bindings/clock/exynos5440-clock.txt
index 5f7005f..c7d227c 100644
--- a/dts/Bindings/clock/exynos5440-clock.txt
+++ b/dts/Bindings/clock/exynos5440-clock.txt
@@ -21,7 +21,7 @@ tree sources.
Example: An example of a clock controller node is listed below.
- clock: clock-controller@0x10010000 {
+ clock: clock-controller@10010000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x10000>;
#clock-cells = <1>;
diff --git a/dts/Bindings/clock/ti-keystone-pllctrl.txt b/dts/Bindings/clock/ti-keystone-pllctrl.txt
index 3e6a81e..c35cb6c 100644
--- a/dts/Bindings/clock/ti-keystone-pllctrl.txt
+++ b/dts/Bindings/clock/ti-keystone-pllctrl.txt
@@ -14,7 +14,7 @@ Required properties:
Example:
-pllctrl: pll-controller@0x02310000 {
+pllctrl: pll-controller@02310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};
diff --git a/dts/Bindings/clock/zx296702-clk.txt b/dts/Bindings/clock/zx296702-clk.txt
index e85ecb5..5c91c9e 100644
--- a/dts/Bindings/clock/zx296702-clk.txt
+++ b/dts/Bindings/clock/zx296702-clk.txt
@@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
for the full list of zx296702 clock IDs.
-topclk: topcrm@0x09800000 {
+topclk: topcrm@09800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
-uart0: serial@0x09405000 {
+uart0: serial@09405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/crypto/fsl-sec4.txt b/dts/Bindings/crypto/fsl-sec4.txt
index 7aef0ea..76aec8a 100644
--- a/dts/Bindings/crypto/fsl-sec4.txt
+++ b/dts/Bindings/crypto/fsl-sec4.txt
@@ -456,7 +456,7 @@ System ON/OFF key driver
Definition: this is phandle to the register map node.
EXAMPLE:
- snvs-pwrkey@0x020cc000 {
+ snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <0 4 0x4>
@@ -545,7 +545,7 @@ FULL EXAMPLE
interrupts = <93 2>;
};
- snvs-pwrkey@0x020cc000 {
+ snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&sec_mon>;
interrupts = <0 4 0x4>;
diff --git a/dts/Bindings/devfreq/event/rockchip-dfi.txt b/dts/Bindings/devfreq/event/rockchip-dfi.txt
index 001dd63..148191b 100644
--- a/dts/Bindings/devfreq/event/rockchip-dfi.txt
+++ b/dts/Bindings/devfreq/event/rockchip-dfi.txt
@@ -9,7 +9,7 @@ Required properties:
- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
Example:
- dfi: dfi@0xff630000 {
+ dfi: dfi@ff630000 {
compatible = "rockchip,rk3399-dfi";
reg = <0x00 0xff630000 0x00 0x4000>;
rockchip,pmu = <&pmugrf>;
diff --git a/dts/Bindings/display/atmel,lcdc.txt b/dts/Bindings/display/atmel,lcdc.txt
index 1a21202..acb5a01 100644
--- a/dts/Bindings/display/atmel,lcdc.txt
+++ b/dts/Bindings/display/atmel,lcdc.txt
@@ -27,7 +27,7 @@ Optional properties:
Example:
- fb0: fb@0x00500000 {
+ fb0: fb@00500000 {
compatible = "atmel,at91sam9g45-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 3 0>;
@@ -41,7 +41,7 @@ Example:
Example for fixed framebuffer memory:
- fb0: fb@0x00500000 {
+ fb0: fb@00500000 {
compatible = "atmel,at91sam9263-lcdc";
reg = <0x00700000 0x1000 0x70000000 0x200000>;
[...]
diff --git a/dts/Bindings/dma/qcom_hidma_mgmt.txt b/dts/Bindings/dma/qcom_hidma_mgmt.txt
index 55492c2..b3408cc 100644
--- a/dts/Bindings/dma/qcom_hidma_mgmt.txt
+++ b/dts/Bindings/dma/qcom_hidma_mgmt.txt
@@ -73,7 +73,7 @@ Hypervisor OS configuration:
max-read-transactions = <31>;
channel-reset-timeout-cycles = <0x500>;
- hidma_24: dma-controller@0x5c050000 {
+ hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;
@@ -85,7 +85,7 @@ Hypervisor OS configuration:
Guest OS configuration:
- hidma_24: dma-controller@0x5c050000 {
+ hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;
diff --git a/dts/Bindings/dma/zxdma.txt b/dts/Bindings/dma/zxdma.txt
index abec59f..0ab80f6 100644
--- a/dts/Bindings/dma/zxdma.txt
+++ b/dts/Bindings/dma/zxdma.txt
@@ -13,7 +13,7 @@ Required properties:
Example:
Controller:
- dma: dma-controller@0x09c00000{
+ dma: dma-controller@09c00000{
compatible = "zte,zx296702-dma";
reg = <0x09c00000 0x1000>;
clocks = <&topclk ZX296702_DMA_ACLK>;
diff --git a/dts/Bindings/eeprom/at25.txt b/dts/Bindings/eeprom/at25.txt
index 1d34471..e823d90 100644
--- a/dts/Bindings/eeprom/at25.txt
+++ b/dts/Bindings/eeprom/at25.txt
@@ -1,7 +1,12 @@
EEPROMs (SPI) compatible with Atmel at25.
Required properties:
-- compatible : "atmel,at25".
+- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
+ Example "<vendor>,<type>" values:
+ "microchip,25lc040"
+ "st,m95m02"
+ "st,m95256"
+
- reg : chip select number
- spi-max-frequency : max spi frequency to use
- pagesize : size of the eeprom page
@@ -13,7 +18,7 @@ Optional properties:
- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
- read-only : this parameter-less property disables writes to the eeprom
-Obsolete legacy properties are can be used in place of "size", "pagesize",
+Obsolete legacy properties can be used in place of "size", "pagesize",
"address-width", and "read-only":
- at25,byte-len : total eeprom size in bytes
- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
@@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize",
Additional compatible properties are also allowed.
Example:
- at25@0 {
- compatible = "atmel,at25", "st,m95256";
+ eeprom@0 {
+ compatible = "st,m95256", "atmel,at25";
reg = <0>
spi-max-frequency = <5000000>;
spi-cpha;
diff --git a/dts/Bindings/gpio/gpio-altera.txt b/dts/Bindings/gpio/gpio-altera.txt
index 826a720..146e554 100644
--- a/dts/Bindings/gpio/gpio-altera.txt
+++ b/dts/Bindings/gpio/gpio-altera.txt
@@ -30,7 +30,7 @@ Optional properties:
Example:
-gpio_altr: gpio@0xff200000 {
+gpio_altr: gpio@ff200000 {
compatible = "altr,pio-1.0";
reg = <0xff200000 0x10>;
interrupts = <0 45 4>;
diff --git a/dts/Bindings/gpio/gpio-pca953x.txt b/dts/Bindings/gpio/gpio-pca953x.txt
index 7f57271..0d01587 100644
--- a/dts/Bindings/gpio/gpio-pca953x.txt
+++ b/dts/Bindings/gpio/gpio-pca953x.txt
@@ -27,7 +27,7 @@ Required properties:
ti,tca6424
ti,tca9539
ti,tca9554
- onsemi,pca9654
+ onnn,pca9654
exar,xra1202
Optional properties:
diff --git a/dts/Bindings/i2c/i2c-jz4780.txt b/dts/Bindings/i2c/i2c-jz4780.txt
index 231e4cc..d4a082a 100644
--- a/dts/Bindings/i2c/i2c-jz4780.txt
+++ b/dts/Bindings/i2c/i2c-jz4780.txt
@@ -18,7 +18,7 @@ Optional properties:
Example
/ {
- i2c4: i2c4@0x10054000 {
+ i2c4: i2c4@10054000 {
compatible = "ingenic,jz4780-i2c";
reg = <0x10054000 0x1000>;
diff --git a/dts/Bindings/iio/pressure/hp03.txt b/dts/Bindings/iio/pressure/hp03.txt
index 54e7e70..831dbee 100644
--- a/dts/Bindings/iio/pressure/hp03.txt
+++ b/dts/Bindings/iio/pressure/hp03.txt
@@ -10,7 +10,7 @@ Required properties:
Example:
-hp03@0x77 {
+hp03@77 {
compatible = "hoperf,hp03";
reg = <0x77>;
xclr-gpio = <&portc 0 0x0>;
diff --git a/dts/Bindings/input/touchscreen/bu21013.txt b/dts/Bindings/input/touchscreen/bu21013.txt
index ca5a2c8..56d8352 100644
--- a/dts/Bindings/input/touchscreen/bu21013.txt
+++ b/dts/Bindings/input/touchscreen/bu21013.txt
@@ -15,7 +15,7 @@ Optional properties:
Example:
i2c@80110000 {
- bu21013_tp@0x5c {
+ bu21013_tp@5c {
compatible = "rohm,bu21013_tp";
reg = <0x5c>;
touch-gpio = <&gpio2 20 0x4>;
diff --git a/dts/Bindings/interrupt-controller/arm,gic.txt b/dts/Bindings/interrupt-controller/arm,gic.txt
index 560d8a7..2f32446 100644
--- a/dts/Bindings/interrupt-controller/arm,gic.txt
+++ b/dts/Bindings/interrupt-controller/arm,gic.txt
@@ -155,7 +155,7 @@ Example:
<0x0 0xe112f000 0 0x02000>,
<0x0 0xe1140000 0 0x10000>,
<0x0 0xe1160000 0 0x10000>;
- v2m0: v2m@0x8000 {
+ v2m0: v2m@8000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x80000 0 0x1000>;
@@ -163,7 +163,7 @@ Example:
....
- v2mN: v2m@0x9000 {
+ v2mN: v2m@9000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x90000 0 0x1000>;
diff --git a/dts/Bindings/interrupt-controller/img,meta-intc.txt b/dts/Bindings/interrupt-controller/img,meta-intc.txt
index 80994ad..42431f4 100644
--- a/dts/Bindings/interrupt-controller/img,meta-intc.txt
+++ b/dts/Bindings/interrupt-controller/img,meta-intc.txt
@@ -71,7 +71,7 @@ Example 2:
* An interrupt generating device that is wired to a Meta external
* trigger block.
*/
- uart1: uart@0x02004c00 {
+ uart1: uart@02004c00 {
// Interrupt source '5' that is level-sensitive.
// Note that there are only two cells as specified in the
// interrupt parent's '#interrupt-cells' property.
diff --git a/dts/Bindings/interrupt-controller/img,pdc-intc.txt b/dts/Bindings/interrupt-controller/img,pdc-intc.txt
index a691185..5dc2a55 100644
--- a/dts/Bindings/interrupt-controller/img,pdc-intc.txt
+++ b/dts/Bindings/interrupt-controller/img,pdc-intc.txt
@@ -51,7 +51,7 @@ Example 1:
/*
* TZ1090 PDC block
*/
- pdc: pdc@0x02006000 {
+ pdc: pdc@02006000 {
// This is an interrupt controller node.
interrupt-controller;
diff --git a/dts/Bindings/interrupt-controller/st,spear3xx-shirq.txt b/dts/Bindings/interrupt-controller/st,spear3xx-shirq.txt
index 715a013..2ab0ea3 100644
--- a/dts/Bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ b/dts/Bindings/interrupt-controller/st,spear3xx-shirq.txt
@@ -39,7 +39,7 @@ Example:
The following is an example from the SPEAr320 SoC dtsi file.
-shirq: interrupt-controller@0xb3000000 {
+shirq: interrupt-controller@b3000000 {
compatible = "st,spear320-shirq";
reg = <0xb3000000 0x1000>;
interrupts = <28 29 30 1>;
diff --git a/dts/Bindings/mailbox/altera-mailbox.txt b/dts/Bindings/mailbox/altera-mailbox.txt
index c261979..49cfc8c 100644
--- a/dts/Bindings/mailbox/altera-mailbox.txt
+++ b/dts/Bindings/mailbox/altera-mailbox.txt
@@ -14,7 +14,7 @@ Optional properties:
depends on the interrupt controller parent.
Example:
- mbox_tx: mailbox@0x100 {
+ mbox_tx: mailbox@100 {
compatible = "altr,mailbox-1.0";
reg = <0x100 0x8>;
interrupt-parent = < &gic_0 >;
@@ -22,7 +22,7 @@ Example:
#mbox-cells = <1>;
};
- mbox_rx: mailbox@0x200 {
+ mbox_rx: mailbox@200 {
compatible = "altr,mailbox-1.0";
reg = <0x200 0x8>;
interrupt-parent = < &gic_0 >;
@@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
used to give a name to the communication channel to be used by the client user.
Example:
- mclient0: mclient0@0x400 {
+ mclient0: mclient0@400 {
compatible = "client-1.0";
reg = <0x400 0x10>;
mbox-names = "mbox-tx", "mbox-rx";
diff --git a/dts/Bindings/mailbox/brcm,iproc-pdc-mbox.txt b/dts/Bindings/mailbox/brcm,iproc-pdc-mbox.txt
index 0f3ee81..9bcdf20 100644
--- a/dts/Bindings/mailbox/brcm,iproc-pdc-mbox.txt
+++ b/dts/Bindings/mailbox/brcm,iproc-pdc-mbox.txt
@@ -15,7 +15,7 @@ Optional properties:
- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
Example:
- pdc0: iproc-pdc0@0x612c0000 {
+ pdc0: iproc-pdc0@612c0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/media/exynos5-gsc.txt b/dts/Bindings/media/exynos5-gsc.txt
index 0d4fdae..bc963a6 100644
--- a/dts/Bindings/media/exynos5-gsc.txt
+++ b/dts/Bindings/media/exynos5-gsc.txt
@@ -17,7 +17,7 @@ Optional properties:
Example:
-gsc_0: gsc@0x13e00000 {
+gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5250-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
diff --git a/dts/Bindings/media/mediatek-vcodec.txt b/dts/Bindings/media/mediatek-vcodec.txt
index 46c15c5..2a615d8 100644
--- a/dts/Bindings/media/mediatek-vcodec.txt
+++ b/dts/Bindings/media/mediatek-vcodec.txt
@@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
"vdec_bus_clk_src";
};
- vcodec_enc: vcodec@0x18002000 {
+ vcodec_enc: vcodec@18002000 {
compatible = "mediatek,mt8173-vcodec-enc";
reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
diff --git a/dts/Bindings/media/rcar_vin.txt b/dts/Bindings/media/rcar_vin.txt
index 6e4ef8c..19357d0 100644
--- a/dts/Bindings/media/rcar_vin.txt
+++ b/dts/Bindings/media/rcar_vin.txt
@@ -44,7 +44,7 @@ Device node example
vin0 = &vin0;
};
- vin0: vin@0xe6ef0000 {
+ vin0: vin@e6ef0000 {
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;
diff --git a/dts/Bindings/media/samsung-fimc.txt b/dts/Bindings/media/samsung-fimc.txt
index e4e15d8..48c599d 100644
--- a/dts/Bindings/media/samsung-fimc.txt
+++ b/dts/Bindings/media/samsung-fimc.txt
@@ -138,7 +138,7 @@ Example:
};
/* MIPI CSI-2 bus IF sensor */
- s5c73m3: sensor@0x1a {
+ s5c73m3: sensor@1a {
compatible = "samsung,s5c73m3";
reg = <0x1a>;
vddio-supply = <...>;
diff --git a/dts/Bindings/media/sh_mobile_ceu.txt b/dts/Bindings/media/sh_mobile_ceu.txt
index 1ce4e46..17a8e81 100644
--- a/dts/Bindings/media/sh_mobile_ceu.txt
+++ b/dts/Bindings/media/sh_mobile_ceu.txt
@@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
Example:
-ceu0: ceu@0xfe910000 {
+ceu0: ceu@fe910000 {
compatible = "renesas,sh-mobile-ceu";
reg = <0xfe910000 0xa0>;
interrupt-parent = <&intcs>;
diff --git a/dts/Bindings/media/video-interfaces.txt b/dts/Bindings/media/video-interfaces.txt
index 3994b01..258b8df 100644
--- a/dts/Bindings/media/video-interfaces.txt
+++ b/dts/Bindings/media/video-interfaces.txt
@@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
'port' node which may indicate that at any time only one of the following data
pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
- ceu0: ceu@0xfe910000 {
+ ceu0: ceu@fe910000 {
compatible = "renesas,sh-mobile-ceu";
reg = <0xfe910000 0xa0>;
interrupts = <0x880>;
@@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
- i2c0: i2c@0xfff20000 {
+ i2c0: i2c@fff20000 {
...
- ov772x_1: camera@0x21 {
+ ov772x_1: camera@21 {
compatible = "ovti,ov772x";
reg = <0x21>;
vddio-supply = <&regulator1>;
@@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
- imx074: camera@0x1a {
+ imx074: camera@1a {
compatible = "sony,imx074";
reg = <0x1a>;
vddio-supply = <&regulator1>;
@@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
};
};
- csi2: csi2@0xffc90000 {
+ csi2: csi2@ffc90000 {
compatible = "renesas,sh-mobile-csi2";
reg = <0xffc90000 0x1000>;
interrupts = <0x17a0>;
diff --git a/dts/Bindings/memory-controllers/ti/emif.txt b/dts/Bindings/memory-controllers/ti/emif.txt
index fd823d6..152eecc 100644
--- a/dts/Bindings/memory-controllers/ti/emif.txt
+++ b/dts/Bindings/memory-controllers/ti/emif.txt
@@ -46,7 +46,7 @@ Optional properties:
Example:
-emif1: emif@0x4c000000 {
+emif1: emif@4c000000 {
compatible = "ti,emif-4d";
ti,hwmods = "emif2";
phy-type = <1>;
diff --git a/dts/Bindings/mfd/ti-keystone-devctrl.txt b/dts/Bindings/mfd/ti-keystone-devctrl.txt
index 20963c7..71a1f59 100644
--- a/dts/Bindings/mfd/ti-keystone-devctrl.txt
+++ b/dts/Bindings/mfd/ti-keystone-devctrl.txt
@@ -13,7 +13,7 @@ Required properties:
Example:
-devctrl: device-state-control@0x02620000 {
+devctrl: device-state-control@02620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
};
diff --git a/dts/Bindings/misc/brcm,kona-smc.txt b/dts/Bindings/misc/brcm,kona-smc.txt
index 6c9f176..05b4723 100644
--- a/dts/Bindings/misc/brcm,kona-smc.txt
+++ b/dts/Bindings/misc/brcm,kona-smc.txt
@@ -9,7 +9,7 @@ Required properties:
- reg : Location and size of bounce buffer
Example:
- smc@0x3404c000 {
+ smc@3404c000 {
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; //1 KiB in SRAM
};
diff --git a/dts/Bindings/mmc/brcm,kona-sdhci.txt b/dts/Bindings/mmc/brcm,kona-sdhci.txt
index aaba248..7f5dd83 100644
--- a/dts/Bindings/mmc/brcm,kona-sdhci.txt
+++ b/dts/Bindings/mmc/brcm,kona-sdhci.txt
@@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
-sdio2: sdio@0x3f1a0000 {
+sdio2: sdio@3f1a0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
clocks = <&sdio3_clk>;
diff --git a/dts/Bindings/mmc/brcm,sdhci-iproc.txt b/dts/Bindings/mmc/brcm,sdhci-iproc.txt
index 954561d..fa90d25 100644
--- a/dts/Bindings/mmc/brcm,sdhci-iproc.txt
+++ b/dts/Bindings/mmc/brcm,sdhci-iproc.txt
@@ -24,7 +24,7 @@ Optional properties:
Example:
-sdhci0: sdhci@0x18041000 {
+sdhci0: sdhci@18041000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x18041000 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/mmc/ti-omap-hsmmc.txt b/dts/Bindings/mmc/ti-omap-hsmmc.txt
index 3a4ac40..19f5508 100644
--- a/dts/Bindings/mmc/ti-omap-hsmmc.txt
+++ b/dts/Bindings/mmc/ti-omap-hsmmc.txt
@@ -55,7 +55,7 @@ Examples:
[hwmod populated DMA resources]
- mmc1: mmc@0x4809c000 {
+ mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
@@ -67,7 +67,7 @@ Examples:
[generic DMA request binding]
- mmc1: mmc@0x4809c000 {
+ mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
diff --git a/dts/Bindings/mtd/gpmc-nor.txt b/dts/Bindings/mtd/gpmc-nor.txt
index 131d3a7..c8567b4 100644
--- a/dts/Bindings/mtd/gpmc-nor.txt
+++ b/dts/Bindings/mtd/gpmc-nor.txt
@@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
label = "bootloader-nor";
reg = <0 0x40000>;
};
- partition@0x40000 {
+ partition@40000 {
label = "params-nor";
reg = <0x40000 0x40000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "kernel-nor";
reg = <0x80000 0x200000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "filesystem-nor";
reg = <0x240000 0x7d80000>;
};
diff --git a/dts/Bindings/mtd/mtk-nand.txt b/dts/Bindings/mtd/mtk-nand.txt
index dbf9e05..0431841 100644
--- a/dts/Bindings/mtd/mtk-nand.txt
+++ b/dts/Bindings/mtd/mtk-nand.txt
@@ -131,7 +131,7 @@ Example:
read-only;
reg = <0x00000000 0x00400000>;
};
- android@0x00400000 {
+ android@00400000 {
label = "android";
reg = <0x00400000 0x12c00000>;
};
diff --git a/dts/Bindings/net/altera_tse.txt b/dts/Bindings/net/altera_tse.txt
index a706297..0e21df9 100644
--- a/dts/Bindings/net/altera_tse.txt
+++ b/dts/Bindings/net/altera_tse.txt
@@ -52,7 +52,7 @@ Optional properties:
Example:
- tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
+ tse_sub_0_eth_tse_0: ethernet@1,00000000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00000000 0x00000400>,
<0x00000001 0x00000460 0x00000020>,
@@ -90,7 +90,7 @@ Example:
};
};
- tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
+ tse_sub_1_eth_tse_0: ethernet@1,00001000 {
compatible = "altr,tse-msgdma-1.0";
reg = <0x00000001 0x00001000 0x00000400>,
<0x00000001 0x00001460 0x00000020>,
diff --git a/dts/Bindings/net/mdio.txt b/dts/Bindings/net/mdio.txt
index 96a53f8..e3e1603 100644
--- a/dts/Bindings/net/mdio.txt
+++ b/dts/Bindings/net/mdio.txt
@@ -18,7 +18,7 @@ Example :
This example shows these optional properties, plus other properties
required for the TI Davinci MDIO driver.
- davinci_mdio: ethernet@0x5c030000 {
+ davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
reg = <0x5c030000 0x1000>;
#address-cells = <1>;
diff --git a/dts/Bindings/net/socfpga-dwmac.txt b/dts/Bindings/net/socfpga-dwmac.txt
index b30d04b..17d6819 100644
--- a/dts/Bindings/net/socfpga-dwmac.txt
+++ b/dts/Bindings/net/socfpga-dwmac.txt
@@ -28,7 +28,7 @@ Required properties:
Example:
-gmii_to_sgmii_converter: phy@0x100000240 {
+gmii_to_sgmii_converter: phy@100000240 {
compatible = "altr,gmii-to-sgmii-2.0";
reg = <0x00000001 0x00000240 0x00000008>,
<0x00000001 0x00000200 0x00000040>;
diff --git a/dts/Bindings/nios2/nios2.txt b/dts/Bindings/nios2/nios2.txt
index d6d0a94..b95e831 100644
--- a/dts/Bindings/nios2/nios2.txt
+++ b/dts/Bindings/nios2/nios2.txt
@@ -36,7 +36,7 @@ Optional properties:
Example:
-cpu@0x0 {
+cpu@0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0>;
diff --git a/dts/Bindings/pci/altera-pcie.txt b/dts/Bindings/pci/altera-pcie.txt
index 4958801..a1dc936 100644
--- a/dts/Bindings/pci/altera-pcie.txt
+++ b/dts/Bindings/pci/altera-pcie.txt
@@ -25,7 +25,7 @@ Optional properties:
- bus-range: PCI bus numbers covered
Example
- pcie_0: pcie@0xc00000000 {
+ pcie_0: pcie@c00000000 {
compatible = "altr,pcie-root-port-1.0";
reg = <0xc0000000 0x20000000>,
<0xff220000 0x00004000>;
diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.txt b/dts/Bindings/pci/fsl,imx6q-pcie.txt
index 7b1e48b..149d8f7 100644
--- a/dts/Bindings/pci/fsl,imx6q-pcie.txt
+++ b/dts/Bindings/pci/fsl,imx6q-pcie.txt
@@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
Example:
- pcie@0x01000000 {
+ pcie@01000000 {
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
reg = <0x01ffc000 0x04000>,
<0x01f00000 0x80000>;
diff --git a/dts/Bindings/pci/hisilicon-pcie.txt b/dts/Bindings/pci/hisilicon-pcie.txt
index bdb7ab3..7bf9df0 100644
--- a/dts/Bindings/pci/hisilicon-pcie.txt
+++ b/dts/Bindings/pci/hisilicon-pcie.txt
@@ -21,7 +21,7 @@ Optional properties:
- dma-coherent: Present if DMA operations are coherent.
Hip05 Example (note that Hip06 is the same except compatible):
- pcie@0xb0080000 {
+ pcie@b0080000 {
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
reg-names = "rc_dbi", "config";
diff --git a/dts/Bindings/phy/sun4i-usb-phy.txt b/dts/Bindings/phy/sun4i-usb-phy.txt
index cbc7847..c1ce5a0 100644
--- a/dts/Bindings/phy/sun4i-usb-phy.txt
+++ b/dts/Bindings/phy/sun4i-usb-phy.txt
@@ -45,7 +45,7 @@ Optional properties:
- usb3_vbus-supply : regulator phandle for controller usb3 vbus
Example:
- usbphy: phy@0x01c13400 {
+ usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
/* phy base regs, phy1 pmu reg, phy2 pmu reg */
diff --git a/dts/Bindings/pinctrl/brcm,cygnus-pinmux.txt b/dts/Bindings/pinctrl/brcm,cygnus-pinmux.txt
index 3600d5c..3914529 100644
--- a/dts/Bindings/pinctrl/brcm,cygnus-pinmux.txt
+++ b/dts/Bindings/pinctrl/brcm,cygnus-pinmux.txt
@@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
For example:
- pinmux: pinmux@0x0301d0c8 {
+ pinmux: pinmux@0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x1b0>;
diff --git a/dts/Bindings/pinctrl/pinctrl-atlas7.txt b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
index eecf028..bf9b070 100644
--- a/dts/Bindings/pinctrl/pinctrl-atlas7.txt
+++ b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
@@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
For a specific board, if it wants to use sd1,
it can add the following to its board-specific .dts file.
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pmx0>;
}
or
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pmx1>;
}
diff --git a/dts/Bindings/pinctrl/pinctrl-sirf.txt b/dts/Bindings/pinctrl/pinctrl-sirf.txt
index 5f55be5..f842052 100644
--- a/dts/Bindings/pinctrl/pinctrl-sirf.txt
+++ b/dts/Bindings/pinctrl/pinctrl-sirf.txt
@@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
For a specific board, if it wants to use uart2 without hardware flow control,
it can add the following to its board-specific .dts file.
-uart2: uart@0xb0070000 {
+uart2: uart@b0070000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_noflow_pins_a>;
}
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
index 4864e3a..a01a3b8 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
@@ -136,7 +136,7 @@ Example for rk3188:
#size-cells = <1>;
ranges;
- gpio0: gpio0@0x2000a000 {
+ gpio0: gpio0@2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -149,7 +149,7 @@ Example for rk3188:
#interrupt-cells = <2>;
};
- gpio1: gpio1@0x2003c000 {
+ gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/regulator/regulator.txt b/dts/Bindings/regulator/regulator.txt
index 378f6dc..3cbf56c 100644
--- a/dts/Bindings/regulator/regulator.txt
+++ b/dts/Bindings/regulator/regulator.txt
@@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
...
};
- mmc: mmc@0x0 {
+ mmc: mmc@0 {
...
...
vmmc-supply = <&twl_reg1>;
diff --git a/dts/Bindings/serial/efm32-uart.txt b/dts/Bindings/serial/efm32-uart.txt
index 8adbab2..4f8d8fd 100644
--- a/dts/Bindings/serial/efm32-uart.txt
+++ b/dts/Bindings/serial/efm32-uart.txt
@@ -12,7 +12,7 @@ Optional properties:
Example:
-uart@0x4000c400 {
+uart@4000c400 {
compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15>;
diff --git a/dts/Bindings/serio/allwinner,sun4i-ps2.txt b/dts/Bindings/serio/allwinner,sun4i-ps2.txt
index f311472..75996b6 100644
--- a/dts/Bindings/serio/allwinner,sun4i-ps2.txt
+++ b/dts/Bindings/serio/allwinner,sun4i-ps2.txt
@@ -14,7 +14,7 @@ Required properties:
Example:
- ps20: ps2@0x01c2a000 {
+ ps20: ps2@01c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <0 62 4>;
diff --git a/dts/Bindings/soc/ti/keystone-navigator-qmss.txt b/dts/Bindings/soc/ti/keystone-navigator-qmss.txt
index 64c66a5..77cd42c 100644
--- a/dts/Bindings/soc/ti/keystone-navigator-qmss.txt
+++ b/dts/Bindings/soc/ti/keystone-navigator-qmss.txt
@@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000>,
<0x2a0f000 0x100>,
<0x2a0c000 0x3c8>,
diff --git a/dts/Bindings/sound/adi,axi-i2s.txt b/dts/Bindings/sound/adi,axi-i2s.txt
index 5875ca4..4248b66 100644
--- a/dts/Bindings/sound/adi,axi-i2s.txt
+++ b/dts/Bindings/sound/adi,axi-i2s.txt
@@ -21,7 +21,7 @@ please check:
Example:
- i2s: i2s@0x77600000 {
+ i2s: i2s@77600000 {
compatible = "adi,axi-i2s-1.00.a";
reg = <0x77600000 0x1000>;
clocks = <&clk 15>, <&audio_clock>;
diff --git a/dts/Bindings/sound/adi,axi-spdif-tx.txt b/dts/Bindings/sound/adi,axi-spdif-tx.txt
index 4eb7997..7b664e7 100644
--- a/dts/Bindings/sound/adi,axi-spdif-tx.txt
+++ b/dts/Bindings/sound/adi,axi-spdif-tx.txt
@@ -20,7 +20,7 @@ please check:
Example:
- spdif: spdif@0x77400000 {
+ spdif: spdif@77400000 {
compatible = "adi,axi-spdif-tx-1.00.a";
reg = <0x77600000 0x1000>;
clocks = <&clk 15>, <&audio_clock>;
diff --git a/dts/Bindings/sound/ak4613.txt b/dts/Bindings/sound/ak4613.txt
index 1783f9e..49a2e74 100644
--- a/dts/Bindings/sound/ak4613.txt
+++ b/dts/Bindings/sound/ak4613.txt
@@ -20,7 +20,7 @@ Optional properties:
Example:
&i2c {
- ak4613: ak4613@0x10 {
+ ak4613: ak4613@10 {
compatible = "asahi-kasei,ak4613";
reg = <0x10>;
};
diff --git a/dts/Bindings/sound/ak4642.txt b/dts/Bindings/sound/ak4642.txt
index 340784d..58e48ee 100644
--- a/dts/Bindings/sound/ak4642.txt
+++ b/dts/Bindings/sound/ak4642.txt
@@ -17,7 +17,7 @@ Optional properties:
Example 1:
&i2c {
- ak4648: ak4648@0x12 {
+ ak4648: ak4648@12 {
compatible = "asahi-kasei,ak4642";
reg = <0x12>;
};
diff --git a/dts/Bindings/sound/max98371.txt b/dts/Bindings/sound/max98371.txt
index 6c28523..8b2b270 100644
--- a/dts/Bindings/sound/max98371.txt
+++ b/dts/Bindings/sound/max98371.txt
@@ -10,7 +10,7 @@ Required properties:
Example:
&i2c {
- max98371: max98371@0x31 {
+ max98371: max98371@31 {
compatible = "maxim,max98371";
reg = <0x31>;
};
diff --git a/dts/Bindings/sound/max9867.txt b/dts/Bindings/sound/max9867.txt
index 394cd4e..b8bd914 100644
--- a/dts/Bindings/sound/max9867.txt
+++ b/dts/Bindings/sound/max9867.txt
@@ -10,7 +10,7 @@ Required properties:
Example:
&i2c {
- max9867: max9867@0x18 {
+ max9867: max9867@18 {
compatible = "maxim,max9867";
reg = <0x18>;
};
diff --git a/dts/Bindings/sound/renesas,fsi.txt b/dts/Bindings/sound/renesas,fsi.txt
index 0d0ab51..0cf0f81 100644
--- a/dts/Bindings/sound/renesas,fsi.txt
+++ b/dts/Bindings/sound/renesas,fsi.txt
@@ -20,7 +20,7 @@ Required properties:
Example:
-sh_fsi2: sh_fsi2@0xec230000 {
+sh_fsi2: sh_fsi2@ec230000 {
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupts = <0 146 0x4>;
diff --git a/dts/Bindings/sound/rockchip-spdif.txt b/dts/Bindings/sound/rockchip-spdif.txt
index 0a1dc4e..ec20c12 100644
--- a/dts/Bindings/sound/rockchip-spdif.txt
+++ b/dts/Bindings/sound/rockchip-spdif.txt
@@ -33,7 +33,7 @@ Required properties on RK3288:
Example for the rk3188 SPDIF controller:
-spdif: spdif@0x1011e000 {
+spdif: spdif@1011e000 {
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
reg = <0x1011e000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/sound/st,sti-asoc-card.txt b/dts/Bindings/sound/st,sti-asoc-card.txt
index 40068ec..9c1ee52 100644
--- a/dts/Bindings/sound/st,sti-asoc-card.txt
+++ b/dts/Bindings/sound/st,sti-asoc-card.txt
@@ -51,7 +51,7 @@ Optional properties:
Example:
- sti_uni_player1: sti-uni-player@0x8D81000 {
+ sti_uni_player1: sti-uni-player@8D81000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
st,tdm-mode = <1>;
};
- sti_uni_player2: sti-uni-player@0x8D82000 {
+ sti_uni_player2: sti-uni-player@8D82000 {
compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
dma-names = "tx";
};
- sti_uni_player3: sti-uni-player@0x8D85000 {
+ sti_uni_player3: sti-uni-player@8D85000 {
compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
dma-names = "tx";
};
- sti_uni_reader1: sti-uni-reader@0x8D84000 {
+ sti_uni_reader1: sti-uni-reader@8D84000 {
compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
diff --git a/dts/Bindings/spi/efm32-spi.txt b/dts/Bindings/spi/efm32-spi.txt
index 2c1e6a4..e0fa61a 100644
--- a/dts/Bindings/spi/efm32-spi.txt
+++ b/dts/Bindings/spi/efm32-spi.txt
@@ -19,7 +19,7 @@ Recommended properties :
Example:
-spi1: spi@0x4000c400 { /* USART1 */
+spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "energymicro,efm32-spi";
diff --git a/dts/Bindings/thermal/thermal.txt b/dts/Bindings/thermal/thermal.txt
index 88b6ea1..44d7cb2 100644
--- a/dts/Bindings/thermal/thermal.txt
+++ b/dts/Bindings/thermal/thermal.txt
@@ -239,7 +239,7 @@ cpus {
* A simple fan controller which supports 10 speeds of operation
* (represented as 0-9).
*/
- fan0: fan@0x48 {
+ fan0: fan@48 {
...
cooling-min-level = <0>;
cooling-max-level = <9>;
@@ -252,7 +252,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0x0000ED00 {
+ bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <0>;
};
@@ -330,7 +330,7 @@ ocp {
/*
* A simple IC with several bandgap temperature sensors.
*/
- bandgap0: bandgap@0x0000ED00 {
+ bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <1>;
};
@@ -447,7 +447,7 @@ one thermal zone.
/*
* A simple IC with a single temperature sensor.
*/
- adc: sensor@0x49 {
+ adc: sensor@49 {
...
#thermal-sensor-cells = <0>;
};
@@ -458,7 +458,7 @@ ocp {
/*
* A simple IC with a single bandgap temperature sensor.
*/
- bandgap0: bandgap@0x0000ED00 {
+ bandgap0: bandgap@0000ED00 {
...
#thermal-sensor-cells = <0>;
};
@@ -516,7 +516,7 @@ with many sensors and many cooling devices.
/*
* An IC with several temperature sensor.
*/
- adc_dummy: sensor@0x50 {
+ adc_dummy: sensor@50 {
...
#thermal-sensor-cells = <1>; /* sensor internal ID */
};
diff --git a/dts/Bindings/ufs/ufs-qcom.txt b/dts/Bindings/ufs/ufs-qcom.txt
index 1f69ee1..21d9a93 100644
--- a/dts/Bindings/ufs/ufs-qcom.txt
+++ b/dts/Bindings/ufs/ufs-qcom.txt
@@ -32,7 +32,7 @@ Optional properties:
Example:
- ufsphy1: ufsphy@0xfc597000 {
+ ufsphy1: ufsphy@fc597000 {
compatible = "qcom,ufs-phy-qmp-20nm";
reg = <0xfc597000 0x800>;
reg-names = "phy_mem";
@@ -53,7 +53,7 @@ Example:
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
};
- ufshc@0xfc598000 {
+ ufshc@fc598000 {
...
phys = <&ufsphy1>;
phy-names = "ufsphy";
diff --git a/dts/Bindings/ufs/ufshcd-pltfrm.txt b/dts/Bindings/ufs/ufshcd-pltfrm.txt
index a99ed55..c39dfef 100644
--- a/dts/Bindings/ufs/ufshcd-pltfrm.txt
+++ b/dts/Bindings/ufs/ufshcd-pltfrm.txt
@@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
regulators or clocks are always on.
Example:
- ufshc@0xfc598000 {
+ ufshc@fc598000 {
compatible = "jedec,ufs-1.1";
reg = <0xfc598000 0x800>;
interrupts = <0 28 0>;
diff --git a/dts/Bindings/usb/am33xx-usb.txt b/dts/Bindings/usb/am33xx-usb.txt
index 7a33f22..7a198a3 100644
--- a/dts/Bindings/usb/am33xx-usb.txt
+++ b/dts/Bindings/usb/am33xx-usb.txt
@@ -95,6 +95,7 @@ usb: usb@47400000 {
reg = <0x47401300 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>;
+ #phy-cells = <0>;
};
usb0: usb@47401000 {
@@ -141,6 +142,7 @@ usb: usb@47400000 {
reg = <0x47401b00 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>;
+ #phy-cells = <0>;
};
usb1: usb@47401800 {
diff --git a/dts/Bindings/usb/ehci-st.txt b/dts/Bindings/usb/ehci-st.txt
index 9feea6c..065c91d 100644
--- a/dts/Bindings/usb/ehci-st.txt
+++ b/dts/Bindings/usb/ehci-st.txt
@@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
Example:
- ehci1: usb@0xfe203e00 {
+ ehci1: usb@fe203e00 {
compatible = "st,st-ehci-300x";
reg = <0xfe203e00 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
diff --git a/dts/Bindings/usb/ohci-st.txt b/dts/Bindings/usb/ohci-st.txt
index d893ec9..44c998c 100644
--- a/dts/Bindings/usb/ohci-st.txt
+++ b/dts/Bindings/usb/ohci-st.txt
@@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
Example:
- ohci0: usb@0xfe1ffc00 {
+ ohci0: usb@fe1ffc00 {
compatible = "st,st-ohci-300x";
reg = <0xfe1ffc00 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
diff --git a/dts/Bindings/watchdog/ingenic,jz4740-wdt.txt b/dts/Bindings/watchdog/ingenic,jz4740-wdt.txt
index e27763e..3c7a1cd 100644
--- a/dts/Bindings/watchdog/ingenic,jz4740-wdt.txt
+++ b/dts/Bindings/watchdog/ingenic,jz4740-wdt.txt
@@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers
Example:
-watchdog: jz4740-watchdog@0x10002000 {
+watchdog: jz4740-watchdog@10002000 {
compatible = "ingenic,jz4740-watchdog";
reg = <0x10002000 0x100>;
};