diff options
Diffstat (limited to 'dts/src/arm/am335x-guardian.dts')
-rw-r--r-- | dts/src/arm/am335x-guardian.dts | 490 |
1 files changed, 0 insertions, 490 deletions
diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts deleted file mode 100644 index 1918766c1f..0000000000 --- a/dts/src/arm/am335x-guardian.dts +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2018 Robert Bosch Power Tools GmbH - */ -/dts-v1/; - -#include "am33xx.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Bosch AM335x Guardian"; - compatible = "bosch,am335x-guardian", "ti,am33xx"; - - chosen { - stdout-path = &uart0; - tick-timer = &timer2; - }; - - cpus { - cpu@0 { - cpu0-supply = <&dcdc2_reg>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - - button21 { - label = "guardian-power-button"; - linux,code = <KEY_POWER>; - gpios = <&gpio2 21 0>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; - - led1 { - label = "green:heartbeat"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led2 { - label = "green:mmc0"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - }; - - panel { - compatible = "ti,tilcdc,panel"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; - pinctrl-1 = <&lcd_pins_sleep>; - - display-timings { - 320x240 { - hactive = <320>; - vactive = <240>; - hback-porch = <68>; - hfront-porch = <20>; - hsync-len = <1>; - vback-porch = <18>; - vfront-porch = <4>; - vsync-len = <1>; - clock-frequency = <9000000>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <24>; - bus-width = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - - }; - - pwm7: dmtimer-pwm { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer7>; - pinctrl-names = "default"; - pinctrl-0 = <&dmtimer7_pins>; - ti,clock-source = <0x01>; - }; - - vmmcsd_fixed: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&elm { - status = "okay"; -}; - -&gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ - status = "okay"; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - ti,nand-ecc-opt = "bch16"; - ti,elm-id = <&elm>; - nand-bus-width = <8>; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - /* - * MTD partition table - * - * All SPL-* partitions are sized to minimal length which can - * be independently programmable. For NAND flash this is equal - * to size of erase-block. - */ - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0x0 0x40000>; - }; - - partition@1 { - label = "SPL.backup1"; - reg = <0x40000 0x40000>; - }; - - partition@2 { - label = "SPL.backup2"; - reg = <0x80000 0x40000>; - }; - - partition@3 { - label = "SPL.backup3"; - reg = <0xc0000 0x40000>; - }; - - partition@4 { - label = "u-boot"; - reg = <0x100000 0x100000>; - }; - - partition@5 { - label = "u-boot.backup1"; - reg = <0x200000 0x100000>; - }; - - partition@6 { - label = "u-boot-env"; - reg = <0x300000 0x40000>; - }; - - partition@7 { - label = "u-boot-env.backup1"; - reg = <0x340000 0x40000>; - }; - - partition@8 { - label = "UBI"; - reg = <0x380000 0x1fc80000>; - }; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; - status = "okay"; - - tps: tps@24 { - reg = <0x24>; - }; -}; - -&lcdc { - blue-and-red-wiring = "crossed"; - status = "okay"; -}; - -&mmc1 { - bus-width = <0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vmmcsd_fixed>; - status = "okay"; -}; - -&rtc { - clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; - clock-names = "ext-clk", "int-clk"; - system-power-controller; -}; - -&spi0 { - ti,pindir-d0-out-d1-in; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; -}; - -#include "tps65217.dtsi" - -&tps { - ti,pmic-shutdown-controller; - interrupt-parent = <&intc>; - interrupts = <7>; /* NMI */ - - backlight { - isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <100>; - }; - - regulators { - dcdc1_reg: regulator@0 { - regulator-name = "vdds_dpr"; - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1351500>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-name = "vio,vrtc,vdds"; - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-name = "vdd_3v3aux"; - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-name = "vdd_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-name = "vdd_3v3a"; - regulator-always-on; - }; - }; -}; - -&tscadc { - status = "okay"; - - adc { - ti,adc-channels = <0 1 2 3 4 5 6>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; -}; - -&usb1 { - dr_mode = "host"; -}; - -&am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &gpio_pins>; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; - - dmtimer7_pins: pinmux_dmtimer7_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) - >; - }; - - gpio_keys_pins: pinmux_gpio_keys_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) - >; - }; - - gpio_pins: pinmux_gpio_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) - >; - }; - - lcd_disen_pins: pinmux_lcd_disen_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) - >; - }; - - lcd_pins_default: pinmux_lcd_pins_default { - pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - >; - }; - - lcd_pins_sleep: pinmux_lcd_pins_sleep { - pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - >; - }; - - leds_pins: pinmux_leds_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) - >; - }; - - spi0_pins: pinmux_spi0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - >; - }; - - nandflash_pins: pinmux_nandflash_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) - >; - }; -}; |