diff options
Diffstat (limited to 'dts/src/arm/am335x-guardian.dts')
| -rw-r--r-- | dts/src/arm/am335x-guardian.dts | 746 |
1 files changed, 0 insertions, 746 deletions
diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts deleted file mode 100644 index 1a7e187b19..0000000000 --- a/dts/src/arm/am335x-guardian.dts +++ /dev/null @@ -1,746 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2018 Robert Bosch Power Tools GmbH - */ -/dts-v1/; - -#include "am33xx.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Bosch AM335x Guardian"; - compatible = "bosch,am335x-guardian", "ti,am33xx"; - - chosen { - stdout-path = &uart0; - tick-timer = &timer2; - }; - - cpus { - cpu@0 { - cpu0-supply = <&dcdc2_reg>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - guardian_buttons: gpio-keys { - pinctrl-names = "default"; - pinctrl-0 = <&guardian_button_pins>; - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - select-button { - label = "guardian-select-button"; - linux,code = <KEY_5>; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - - power-button { - label = "guardian-power-button"; - linux,code = <KEY_POWER>; - gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - }; - - guardian_leds: gpio-leds { - pinctrl-names = "default"; - pinctrl-0 = <&guardian_led_pins>; - compatible = "gpio-leds"; - - life-led { - label = "guardian:life-led"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - - panel { - compatible = "ti,tilcdc,panel"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; - pinctrl-1 = <&lcd_pins_sleep>; - - display-timings { - 320x240 { - hactive = <320>; - vactive = <240>; - hback-porch = <68>; - hfront-porch = <20>; - hsync-len = <1>; - vback-porch = <18>; - vfront-porch = <4>; - vsync-len = <1>; - clock-frequency = <9000000>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <24>; - bus-width = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - - }; - - guardian_beeper: dmtimer-pwm@7 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer7>; - pinctrl-names = "default"; - pinctrl-0 = <&guardian_beeper_pins>; - ti,clock-source = <0x01>; - }; - - vmmcsd_fixed: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - mt_keypad: mt_keypad@0 { - compatible = "gpio-mt-keypad"; - debounce-delay-ms = <10>; - col-scan-delay-us = <2>; - keypad,num-lines = <5>; - linux,no-autorepeat; - gpio-activelow; - line-gpios = < - &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/ - &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/ - &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/ - &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/ - &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/ - >; - }; -}; - -&elm { - status = "okay"; -}; - -&gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ - status = "okay"; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - ti,nand-xfer-type = "prefetch-dma"; - ti,nand-ecc-opt = "bch16"; - ti,elm-id = <&elm>; - nand-bus-width = <8>; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <30>; - gpmc,cs-wr-off-ns = <30>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <30>; - gpmc,adv-wr-off-ns = <30>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <15>; - gpmc,oe-on-ns = <1>; - gpmc,oe-off-ns = <15>; - gpmc,access-ns = <30>; - gpmc,rd-cycle-ns = <30>; - gpmc,wr-cycle-ns = <30>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - - /* - * MTD partition table - * - * All SPL-* partitions are sized to minimal length which can - * be independently programmable. For NAND flash this is equal - * to size of erase-block. - */ - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0x0 0x40000>; - }; - - partition@1 { - label = "SPL.backup1"; - reg = <0x40000 0x40000>; - }; - - partition@2 { - label = "SPL.backup2"; - reg = <0x80000 0x40000>; - }; - - partition@3 { - label = "SPL.backup3"; - reg = <0xc0000 0x40000>; - }; - - partition@4 { - label = "u-boot"; - reg = <0x100000 0x100000>; - }; - - partition@5 { - label = "u-boot.backup1"; - reg = <0x200000 0x100000>; - }; - - partition@6 { - label = "u-boot-2"; - reg = <0x300000 0x100000>; - }; - - partition@7 { - label = "u-boot-2.backup1"; - reg = <0x400000 0x100000>; - }; - - partition@8 { - label = "u-boot-env"; - reg = <0x500000 0x40000>; - }; - - partition@9 { - label = "u-boot-env.backup1"; - reg = <0x540000 0x40000>; - }; - - partition@10 { - label = "splash-screen"; - reg = <0x580000 0x40000>; - }; - - partition@11 { - label = "UBI"; - reg = <0x5c0000 0x1fa40000>; - }; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; - status = "okay"; - - tps: tps@24 { - reg = <0x24>; - }; -}; - -&lcdc { - blue-and-red-wiring = "crossed"; - status = "okay"; - port { - lcdc_0: endpoint@0 { - remote-endpoint = <0>; - }; - }; -}; - -&mmc1 { - bus-width = <0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vmmcsd_fixed>; - status = "okay"; -}; - -&rtc { - clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; - clock-names = "ext-clk", "int-clk"; -}; - -&spi0 { - ti,pindir-d0-out-d1-in; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; -}; - -#include "tps65217.dtsi" - -&tps { - /* - * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only - * mode") at poweroff. Most BeagleBone versions do not support RTC-only - * mode and risk hardware damage if this mode is entered. - * - * For details, see linux-omap mailing list May 2015 thread - * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller - * In particular, messages: - * http://www.spinics.net/lists/linux-omap/msg118585.html - * http://www.spinics.net/lists/linux-omap/msg118615.html - * - * You can override this later with - * &tps { /delete-property/ ti,pmic-shutdown-controller; } - * if you want to use RTC-only mode and made sure you are not affected - * by the hardware problems. (Tip: double-check by performing a current - * measurement after shutdown: it should be less than 1 mA.) - */ - ti,pmic-shutdown-controller; - interrupt-parent = <&intc>; - interrupts = <7>; /* NMI */ - - backlight { - isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <500>; /* TPS65217_BL_FDIM_500HZ */ - default-brightness = <50>; - /* 1(on) - enable current sink, while initialization */ - /* 0(off) - disable current sink, while initialization */ - isink-en = <1>; - }; - - regulators { - dcdc1_reg: regulator@0 { - regulator-name = "vdds_dpr"; - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1351500>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-name = "vio,vrtc,vdds"; - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-name = "vdd_3v3aux"; - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-name = "vdd_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-name = "vdd_3v3a"; - regulator-always-on; - }; - }; -}; - -&tscadc { - status = "okay"; - - adc { - ti,adc-channels = <0 1 2 3 4 5 6>; - }; -}; - -&gpio0 { - gpio-line-names = - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "MirxWakeup", - "", - ""; -}; - -&gpio3 { - ti,gpio-always-on; - ti,no-reset-on-init; - gpio-line-names = - "", - "MirxBtReset", - "", - "CcVolAdcEn", - "MirxBlePause", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "AspEn", - "", - "", - "", - "", - "", - "", - "BatVolAdcEn", - "", - "", - "", - "", - "", - "", - "", - "", - "", - ""; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; -}; - -&usb1 { - dr_mode = "host"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - /* xdma_event_intr1.clkout2 */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; - - guardian_interface_pins: pinmux_interface_pins { - pinctrl-single,pins = < - /* ADC_BATSENSE_EN */ - /* (A14) MCASP0_AHCLKx.gpio3[21] */ - AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) - /* ADC_COINCELL_EN */ - /* (J16) MII1_TX_EN.gpio3[3] */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) - /* ASP_ENABLE */ - /* (A13) MCASP0_ACLKx.gpio3[14] */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7) - /* (D16) uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7) - /* (D15) uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7) - /*SWITCH-OFF_3V6*/ - /* (M18) gpio0[1] */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7) - /* MIRACULIX */ - /* (H17) gmii1_crs.gpio3[1] */ - AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) - /* (H18) rmii1_refclk.gpio0[29] */ - AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) - /* (J18) gmii1_txd3.gpio0[16] */ - AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 ) - /* (J17) gmii1_rxdv.gpio3[4] */ - AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) - >; - }; - - guardian_beeper_pins: pinmux_dmtimer7_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ - >; - }; - - guardian_button_pins: pinmux_guardian_button_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ - AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ - >; - }; - - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - led_bl_pins: gpio_led_bl_pins { - pinctrl-single,pins = < - /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) - >; - }; - - lcd_disen_pins: pinmux_lcd_disen_pins { - pinctrl-single,pins = < - /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ - AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) - >; - }; - - lcd_pins_default: pinmux_lcd_pins_default { - pinctrl-single,pins = < - /* (U10) gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (T10) gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (T11) gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (U12) gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (T12) gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (R12) gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (V13) gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* (U13) gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) - >; - }; - - lcd_pins_sleep: pinmux_lcd_pins_sleep { - pinctrl-single,pins = < - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) - >; - }; - - guardian_led_pins: pinmux_guardian_led_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ - >; - }; - - spi0_pins: pinmux_spi0_pins { - pinctrl-single,pins = < - /* SPI0_CLK - spi0_clk.spi */ - AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - /* SPI0_MOSI - spi0_d0.spi0 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) - /* SPI0_MISO - spi0_d1.spi0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) - /* SPI0_CS0 - spi */ - AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) - /* uart0_txd.uart0_txd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - /* K18 uart2_rxd.mirx_txd */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) - /* L18 uart2_txd.mirx_rxd */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) - >; - }; - - nandflash_pins: pinmux_nandflash_pins { - pinctrl-single,pins = < - /* (U7) gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) - /* (V7) gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) - /* (R8) gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) - /* (T8) gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) - /* (U8) gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) - /* (V8) gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) - /* (R9) gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) - /* (T9) gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) - /* (T17) gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) - /* (U17) gpmc_wpn.gpmc_wpn */ - AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) - /* (V6) gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) - /* (R7) gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) - /* (T7) gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) - /* (U6) gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) - /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) - >; - }; -}; |