diff options
Diffstat (limited to 'dts/src/arm/am33xx.dtsi')
-rw-r--r-- | dts/src/arm/am33xx.dtsi | 714 |
1 files changed, 0 insertions, 714 deletions
diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi deleted file mode 100644 index 32d397b395..0000000000 --- a/dts/src/arm/am33xx.dtsi +++ /dev/null @@ -1,714 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for AM33XX SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include <dt-bindings/bus/ti-sysc.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/am33xx.h> -#include <dt-bindings/clock/am3.h> - -/ { - compatible = "ti,am33xx"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - d-can0 = &dcan0; - d-can1 = &dcan1; - usb0 = &usb0; - usb1 = &usb1; - phy0 = &usb0_phy; - phy1 = &usb1_phy; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - spi0 = &spi0; - spi1 = &spi1; - mmc0 = &mmc1; - mmc1 = &mmc2; - mmc2 = &mmc3; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - enable-method = "ti,am3352"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - cpu-idle-states = <&mpu_gate>; - }; - - idle-states { - mpu_gate: mpu_gate { - compatible = "arm,idle-state"; - entry-latency-us = <40>; - exit-latency-us = <90>; - min-residency-us = <300>; - ti,idle-wkup-m3; - }; - }; - }; - - cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because the can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; - }; - - target-module@4b000000 { - compatible = "ti,sysc-omap4-simple", "ti,sysc"; - clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>; - clock-names = "fck"; - ti,no-idle; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x4b000000 0x1000000>; - - target-module@140000 { - compatible = "ti,sysc-omap4-simple", "ti,sysc"; - clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x140000 0xec0000>; - - pmu@0 { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - }; - }; - }; - - /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - }; - - /* - * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex. Since - * it will not bring real advantage to represent that in DT - * for the moment, just use a fake OCP bus entry to represent - * the whole bus hierarchy. - */ - ocp: ocp { - compatible = "simple-pm-bus"; - power-domains = <&prm_per>; - clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - l4_wkup: interconnect@44c00000 { - }; - l4_per: interconnect@48000000 { - }; - l4_fw: interconnect@47c00000 { - }; - l4_fast: interconnect@4a000000 { - }; - l4_mpuss: interconnect@4b140000 { - }; - - intc: interrupt-controller@48200000 { - compatible = "ti,am33xx-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x48200000 0x1000>; - }; - - target-module@49000000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x49000000 0x4>; - reg-names = "rev"; - clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x49000000 0x10000>; - - edma: dma@0 { - compatible = "ti,edma3-tpcc"; - reg = <0 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <20 21>; - }; - }; - - target-module@49800000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x49800000 0x4>, - <0x49800010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_SMART>; - clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x49800000 0x100000>; - - edma_tptc0: dma@0 { - compatible = "ti,edma3-tptc"; - reg = <0 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; - }; - }; - - target-module@49900000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x49900000 0x4>, - <0x49900010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_SMART>; - clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x49900000 0x100000>; - - edma_tptc1: dma@0 { - compatible = "ti,edma3-tptc"; - reg = <0 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; - }; - }; - - target-module@49a00000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x49a00000 0x4>, - <0x49a00010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_SMART>; - clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x49a00000 0x100000>; - - edma_tptc2: dma@0 { - compatible = "ti,edma3-tptc"; - reg = <0 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; - }; - }; - - target-module@47810000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x478102fc 0x4>, - <0x47810110 0x4>, - <0x47810114 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | - SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,syss-mask = <1>; - clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x47810000 0x1000>; - - mmc3: mmc@0 { - compatible = "ti,am335-sdhci"; - ti,needs-special-reset; - interrupts = <29>; - reg = <0x0 0x1000>; - status = "disabled"; - }; - }; - - usb: target-module@47400000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x47400000 0x4>, - <0x47400010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | - SYSC_OMAP4_SOFTRESET)>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x47400000 0x8000>; - - usb0_phy: usb-phy@1300 { - compatible = "ti,am335x-usb-phy"; - reg = <0x1300 0x100>; - reg-names = "phy"; - ti,ctrl_mod = <&usb_ctrl_mod>; - #phy-cells = <0>; - }; - - usb0: usb@1400 { - compatible = "ti,musb-am33xx"; - reg = <0x1400 0x400>, - <0x1000 0x200>; - reg-names = "mc", "control"; - - interrupts = <18>; - interrupt-names = "mc"; - dr_mode = "otg"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - phys = <&usb0_phy>; - - dmas = <&cppi41dma 0 0 &cppi41dma 1 0 - &cppi41dma 2 0 &cppi41dma 3 0 - &cppi41dma 4 0 &cppi41dma 5 0 - &cppi41dma 6 0 &cppi41dma 7 0 - &cppi41dma 8 0 &cppi41dma 9 0 - &cppi41dma 10 0 &cppi41dma 11 0 - &cppi41dma 12 0 &cppi41dma 13 0 - &cppi41dma 14 0 &cppi41dma 0 1 - &cppi41dma 1 1 &cppi41dma 2 1 - &cppi41dma 3 1 &cppi41dma 4 1 - &cppi41dma 5 1 &cppi41dma 6 1 - &cppi41dma 7 1 &cppi41dma 8 1 - &cppi41dma 9 1 &cppi41dma 10 1 - &cppi41dma 11 1 &cppi41dma 12 1 - &cppi41dma 13 1 &cppi41dma 14 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - usb1_phy: usb-phy@1b00 { - compatible = "ti,am335x-usb-phy"; - reg = <0x1b00 0x100>; - reg-names = "phy"; - ti,ctrl_mod = <&usb_ctrl_mod>; - #phy-cells = <0>; - }; - - usb1: usb@1800 { - compatible = "ti,musb-am33xx"; - reg = <0x1c00 0x400>, - <0x1800 0x200>; - reg-names = "mc", "control"; - interrupts = <19>; - interrupt-names = "mc"; - dr_mode = "otg"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - phys = <&usb1_phy>; - - dmas = <&cppi41dma 15 0 &cppi41dma 16 0 - &cppi41dma 17 0 &cppi41dma 18 0 - &cppi41dma 19 0 &cppi41dma 20 0 - &cppi41dma 21 0 &cppi41dma 22 0 - &cppi41dma 23 0 &cppi41dma 24 0 - &cppi41dma 25 0 &cppi41dma 26 0 - &cppi41dma 27 0 &cppi41dma 28 0 - &cppi41dma 29 0 &cppi41dma 15 1 - &cppi41dma 16 1 &cppi41dma 17 1 - &cppi41dma 18 1 &cppi41dma 19 1 - &cppi41dma 20 1 &cppi41dma 21 1 - &cppi41dma 22 1 &cppi41dma 23 1 - &cppi41dma 24 1 &cppi41dma 25 1 - &cppi41dma 26 1 &cppi41dma 27 1 - &cppi41dma 28 1 &cppi41dma 29 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - cppi41dma: dma-controller@2000 { - compatible = "ti,am3359-cppi41"; - reg = <0x0000 0x1000>, - <0x2000 0x1000>, - <0x3000 0x1000>, - <0x4000 0x4000>; - reg-names = "glue", "controller", "scheduler", "queuemgr"; - interrupts = <17>; - interrupt-names = "glue"; - #dma-cells = <2>; - /* For backwards compatibility: */ - #dma-channels = <30>; - dma-channels = <30>; - #dma-requests = <256>; - dma-requests = <256>; - }; - }; - - target-module@40300000 { - compatible = "ti,sysc-omap4-simple", "ti,sysc"; - clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>; - clock-names = "fck"; - ti,no-idle; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40300000 0x10000>; - - ocmcram: sram@0 { - compatible = "mmio-sram"; - reg = <0 0x10000>; /* 64k */ - ranges = <0 0 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - pm_sram_code: pm-code-sram@0 { - compatible = "ti,sram"; - reg = <0x0 0x1000>; - protect-exec; - }; - - pm_sram_data: pm-data-sram@1000 { - compatible = "ti,sram"; - reg = <0x1000 0x1000>; - pool; - }; - }; - }; - - target-module@4c000000 { - compatible = "ti,sysc-omap4-simple", "ti,sysc"; - reg = <0x4c000000 0x4>; - reg-names = "rev"; - clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>; - clock-names = "fck"; - ti,no-idle; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x4c000000 0x1000000>; - - emif: emif@0 { - compatible = "ti,emif-am3352"; - reg = <0 0x1000000>; - interrupts = <101>; - sram = <&pm_sram_code - &pm_sram_data>; - }; - }; - - target-module@50000000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x50000000 4>, - <0x50000010 4>, - <0x50000014 4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,syss-mask = <1>; - clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ - <0x00000000 0x00000000 0x40000000>; /* data */ - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <7>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - }; - - sham_target: target-module@53100000 { - compatible = "ti,sysc-omap3-sham", "ti,sysc"; - reg = <0x53100100 0x4>, - <0x53100110 0x4>, - <0x53100114 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,syss-mask = <1>; - /* Domains (P, C): per_pwrdm, l3_clkdm */ - clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x53100000 0x1000>; - - sham: sham@0 { - compatible = "ti,omap4-sham"; - reg = <0 0x200>; - interrupts = <109>; - dmas = <&edma 36 0>; - dma-names = "rx"; - }; - }; - - aes_target: target-module@53500000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x53500080 0x4>, - <0x53500084 0x4>, - <0x53500088 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,syss-mask = <1>; - /* Domains (P, C): per_pwrdm, l3_clkdm */ - clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x53500000 0x1000>; - - aes: aes@0 { - compatible = "ti,omap4-aes"; - reg = <0 0xa0>; - interrupts = <103>; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; - }; - }; - - target-module@56000000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x5600fe00 0x4>, - <0x5600fe10 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; - clock-names = "fck"; - power-domains = <&prm_gfx>; - resets = <&prm_gfx 0>; - reset-names = "rstctrl"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x56000000 0x1000000>; - - /* - * Closed source PowerVR driver, no child device - * binding or driver in mainline - */ - }; - }; -}; - -#include "am33xx-l4.dtsi" -#include "am33xx-clocks.dtsi" - -&prcm { - prm_per: prm@c00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xc00 0x100>; - #reset-cells = <1>; - #power-domain-cells = <0>; - }; - - prm_wkup: prm@d00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xd00 0x100>; - #reset-cells = <1>; - #power-domain-cells = <0>; - }; - - prm_mpu: prm@e00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xe00 0x100>; - #power-domain-cells = <0>; - }; - - prm_device: prm@f00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xf00 0x100>; - #reset-cells = <1>; - }; - - prm_rtc: prm@1000 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0x1000 0x100>; - #power-domain-cells = <0>; - }; - - prm_gfx: prm@1100 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0x1100 0x100>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - prm_cefuse: prm@1200 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0x1200 0x100>; - #power-domain-cells = <0>; - }; -}; - -/* Preferred always-on timer for clocksource */ -&timer1_target { - clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>, - <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; - clock-names = "fck", "ick"; - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - assigned-clocks = <&timer1_fck>; - assigned-clock-parents = <&sys_clkin_ck>; - }; -}; - -/* Preferred timer for clockevent */ -&timer2_target { - clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>, - <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>; - clock-names = "fck", "ick"; - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - assigned-clocks = <&timer2_fck>; - assigned-clock-parents = <&sys_clkin_ck>; - }; -}; |