diff options
Diffstat (limited to 'dts/src/arm/arm-realview-pb1176.dts')
| -rw-r--r-- | dts/src/arm/arm-realview-pb1176.dts | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index 1bc64cda81..652d85b28a 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -53,6 +53,14 @@ regulator-boot-on; }; + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -106,6 +114,53 @@ clock-frequency = <0>; }; + flash@30000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x30000000 0x4000000>; + bank-width = <4>; + }; + + fpga_flash@38000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x38000000 0x800000>; + bank-width = <4>; + }; + + /* + * The "secure flash" contains things like the boot + * monitor so we don't want people to accidentally + * screw this up. Mark the device tree node disabled + * by default. + */ + secflash@3c000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x3c000000 0x4000000>; + bank-width = <4>; + status = "disabled"; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@3a000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x3a000000 0x10000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb@3b000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x3b000000 0x20000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + port1-otg; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -176,6 +231,41 @@ label = "versatile:7"; default-state = "off"; }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; }; /* Primary DevChip GIC synthesized with the CPU */ @@ -297,6 +387,13 @@ clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; + + /* Direct-mapped development chip ROM */ + pb1176_rom@10200000 { + compatible = "direct-mapped"; + reg = <0x10200000 0x4000>; + bank-width = <1>; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ @@ -306,6 +403,27 @@ compatible = "simple-bus"; ranges; + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + fpga_aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + fpga_mci: mmcsd@10005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x10005000 0x1000>; |