diff options
Diffstat (limited to 'dts/src/arm/armada-370-db.dts')
| -rw-r--r-- | dts/src/arm/armada-370-db.dts | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/dts/src/arm/armada-370-db.dts b/dts/src/arm/armada-370-db.dts deleted file mode 100644 index 77261a2fb9..0000000000 --- a/dts/src/arm/armada-370-db.dts +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Marvell Armada 370 evaluation board - * (DB-88F6710-BP-DDR3) - * - * Copyright (C) 2012 Marvell - * - * Lior Amsalem <alior@marvell.com> - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * Note: this Device Tree assumes that the bootloader has remapped the - * internal registers to 0xf1000000 (instead of the default - * 0xd0000000). The 0xf1000000 is the default used by the recent, - * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier - * boards were delivered with an older version of the bootloader that - * left internal registers mapped at 0xd0000000. If you are in this - * situation, you should either update your bootloader (preferred - * solution) or the below Device Tree should be adjusted. - */ - -/dts-v1/; -#include "armada-370.dtsi" - -/ { - model = "Marvell Armada 370 Evaluation Board"; - compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1 GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - - internal-regs { - serial@12000 { - status = "okay"; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - i2c@11000 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - audio_codec: audio-codec@4a { - #sound-dai-cells = <0>; - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - }; - }; - - audio-controller@30000 { - pinctrl-0 = <&i2s_pins2>; - pinctrl-names = "default"; - status = "okay"; - }; - - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - /* - * This device is disabled by default, because - * using the SD card connector requires - * changing the default CON40 connector - * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a - * different connector - * "DB-88F6710_MPP_RGMII_SD_Jumper". - */ - status = "disabled"; - /* No CD or WP GPIOs */ - broken-cd; - }; - - usb@50000 { - status = "okay"; - }; - - usb@51000 { - status = "okay"; - }; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Armada 370 DB Audio"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Headphone", "Out Jack", - "Line", "In Jack"; - simple-audio-card,routing = - "Out Jack", "HPL", - "Out Jack", "HPR", - "AIN1L", "In Jack", - "AIN1L", "In Jack"; - status = "okay"; - - simple-audio-card,dai-link@0 { - format = "i2s"; - cpu { - sound-dai = <&audio_controller 0>; - }; - - codec { - sound-dai = <&audio_codec>; - }; - }; - - simple-audio-card,dai-link@1 { - format = "i2s"; - cpu { - sound-dai = <&audio_controller 1>; - }; - - codec { - sound-dai = <&spdif_out>; - }; - }; - - simple-audio-card,dai-link@2 { - format = "i2s"; - cpu { - sound-dai = <&audio_controller 1>; - }; - - codec { - sound-dai = <&spdif_in>; - }; - }; - }; - - spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; - - spdif_in: spdif-in { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dir"; - }; -}; - -&pciec { - status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - - -&spi0 { - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - }; -}; |