summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/armada-370-rd.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/armada-370-rd.dts')
-rw-r--r--dts/src/arm/armada-370-rd.dts258
1 files changed, 0 insertions, 258 deletions
diff --git a/dts/src/arm/armada-370-rd.dts b/dts/src/arm/armada-370-rd.dts
deleted file mode 100644
index c910d157a6..0000000000
--- a/dts/src/arm/armada-370-rd.dts
+++ /dev/null
@@ -1,258 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- * Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
- model = "Marvell Armada 370 Reference Design";
- compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
- internal-regs {
- serial@12000 {
- status = "okay";
- };
- sata@a0000 {
- nr-ports = <2>;
- status = "okay";
- };
-
- ethernet@70000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "sgmii";
- };
- ethernet@74000 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii-id";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- mvsdio@d4000 {
- pinctrl-0 = <&sdio_pins1>;
- pinctrl-names = "default";
- status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
- };
-
- usb@50000 {
- status = "okay";
- };
-
- usb@51000 {
- status = "okay";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- button {
- label = "Software Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-fan {
- compatible = "gpio-fan";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0 3000 1>;
- pinctrl-0 = <&fan_pins>;
- pinctrl-names = "default";
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins>;
-
- sw_led {
- label = "370rd:green:sw";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
- };
- };
-};
-
-&pciec {
- status = "okay";
-
- /* Internal mini-PCIe connector */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Internal mini-PCIe connector */
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- switch: switch@10 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan0";
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <&eth1>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switchphy0: switchphy@0 {
- reg = <0>;
- interrupt-parent = <&switch>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- switchphy1: switchphy@1 {
- reg = <1>;
- interrupt-parent = <&switch>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- switchphy2: switchphy@2 {
- reg = <2>;
- interrupt-parent = <&switch>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- switchphy3: switchphy@3 {
- reg = <3>;
- interrupt-parent = <&switch>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
- };
-};
-
-
-&pinctrl {
- fan_pins: fan-pins {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- led_pins: led-pins {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-};