summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/armada-370-synology-ds213j.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/armada-370-synology-ds213j.dts')
-rw-r--r--dts/src/arm/armada-370-synology-ds213j.dts112
1 files changed, 56 insertions, 56 deletions
diff --git a/dts/src/arm/armada-370-synology-ds213j.dts b/dts/src/arm/armada-370-synology-ds213j.dts
index 8ca7a4340c..a9cc427768 100644
--- a/dts/src/arm/armada-370-synology-ds213j.dts
+++ b/dts/src/arm/armada-370-synology-ds213j.dts
@@ -87,62 +87,6 @@
status = "disabled";
};
- spi0: spi@10600 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q064", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <20000000>;
-
- /*
- * Warning!
- *
- * Synology u-boot uses its compiled-in environment
- * and it seems Synology did not care to change u-boot
- * default configuration in order to allow saving a
- * modified environment at a sensible location. So,
- * if you do a 'saveenv' under u-boot, your modified
- * environment will be saved at 1MB after the start
- * of the flash, i.e. in the middle of the uImage.
- * For that reason, it is strongly advised not to
- * change the default environment, unless you know
- * what you are doing.
- */
- partition@00000000 { /* u-boot */
- label = "RedBoot";
- reg = <0x00000000 0x000c0000>; /* 768KB */
- };
-
- partition@000c0000 { /* uImage */
- label = "zImage";
- reg = <0x000c0000 0x002d0000>; /* 2880KB */
- };
-
- partition@00390000 { /* uInitramfs */
- label = "rd.gz";
- reg = <0x00390000 0x00440000>; /* 4250KB */
- };
-
- partition@007d0000 { /* MAC address and serial number */
- label = "vendor";
- reg = <0x007d0000 0x00010000>; /* 64KB */
- };
-
- partition@007e0000 {
- label = "RedBoot config";
- reg = <0x007e0000 0x00010000>; /* 64KB */
- };
-
- partition@007f0000 {
- label = "FIS directory";
- reg = <0x007f0000 0x00010000>; /* 64KB */
- };
- };
- };
-
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
pinctrl-0 = <&i2c0_pins>;
@@ -347,3 +291,59 @@
marvell,function = "gpio";
};
};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000c0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@00390000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x00390000 0x00440000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+};