diff options
Diffstat (limited to 'dts/src/arm/armada-385-atl-x530.dts')
-rw-r--r-- | dts/src/arm/armada-385-atl-x530.dts | 235 |
1 files changed, 0 insertions, 235 deletions
diff --git a/dts/src/arm/armada-385-atl-x530.dts b/dts/src/arm/armada-385-atl-x530.dts deleted file mode 100644 index ed3f41c7df..0000000000 --- a/dts/src/arm/armada-385-atl-x530.dts +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board. - (x530/AT-GS980MX) - * - Copyright (C) 2020 Allied Telesis Labs - */ - -/dts-v1/; -#include "armada-385.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "x530/AT-GS980MX"; - compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; - - internal-regs { - i2c0: i2c@11000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - }; - - uart0: serial@12000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - }; - }; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - reset-delay-us = <400000>; -}; - -&pcie2 { - status = "okay"; -}; - -&devbus_cs1 { - compatible = "marvell,mvebu-devbus"; - status = "okay"; - - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - nvs@0 { - status = "okay"; - - compatible = "mtd-ram"; - reg = <0 0x00080000>; - bank-width = <1>; - label = "nvs"; - }; -}; - -&pinctrl { - i2c0_gpio_pins: i2c-gpio-pins-0 { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "gpio"; - }; -}; - -&i2c0 { - clock-frequency = <100000>; - status = "okay"; - - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&i2c0_pins>; - pinctrl-1 = <&i2c0_gpio_pins>; - scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - - i2c0mux: mux@71 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,pca9544"; - reg = <0x71>; - i2c-mux-idle-disconnect; - - i2c@0 { /* POE devices MUX */ - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - adt7476_2e: hwmon@2e { - compatible = "adi,adt7476"; - reg = <0x2e>; - }; - - adt7476_2d: hwmon@2d { - compatible = "adi,adt7476"; - reg = <0x2d>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - rtc@68 { - compatible = "dallas,ds1340"; - reg = <0x68>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - gpio@20 { - compatible = "nxp,pca9554"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - }; - }; - }; -}; - -&usb0 { - status = "okay"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - spi-flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@u-boot { - reg = <0x00000000 0x00100000>; - label = "u-boot"; - }; - partition@u-boot-env { - reg = <0x00100000 0x00040000>; - label = "u-boot-env"; - }; - partition@unused { - reg = <0x00140000 0x00e80000>; - label = "unused"; - }; - partition@idprom { - reg = <0x00fc0000 0x00040000>; - label = "idprom"; - }; - }; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - marvell,nand-enable-arbiter; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@user { - reg = <0x00000000 0x0f000000>; - label = "user"; - }; - partition@errlog { - /* Maximum mtdoops size is 8MB, so set to that. */ - reg = <0x0f000000 0x00800000>; - label = "errlog"; - }; - partition@nand-bbt { - reg = <0x0f800000 0x00800000>; - label = "nand-bbt"; - }; - }; - }; -}; - |