diff options
Diffstat (limited to 'dts/src/arm/armada-385-linksys.dtsi')
| -rw-r--r-- | dts/src/arm/armada-385-linksys.dtsi | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/dts/src/arm/armada-385-linksys.dtsi b/dts/src/arm/armada-385-linksys.dtsi deleted file mode 100644 index fb9c8a0b24..0000000000 --- a/dts/src/arm/armada-385-linksys.dtsi +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Device Tree include file for Armada 385 based Linksys boards - * - * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "armada-385.dtsi" - -/ { - model = "Linksys boards based on Armada 385"; - compatible = "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MiB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - }; - - usb3_1_phy: usb3_1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&usb3_1_vbus>; - #phy-cells = <0>; - }; - - usb3_1_vbus: usb3_1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_1_vbus_pins>; - regulator-name = "usb3_1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&gpio_keys_pins>; - pinctrl-names = "default"; - - wps { - label = "WPS"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Factory Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&gpio_leds_pins>; - pinctrl-names = "default"; - - power { - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - sata { - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "disk-activity"; - }; - }; -}; - -&ahci0 { - status = "okay"; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - status = "okay"; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -ð2 { - status = "okay"; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - expander0: pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,pca9635"; - reg = <0x68>; - }; -}; - -&nand_controller { - /* 128MiB or 256MiB */ - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - nand: nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-keep-config; - nand-on-flash-bbt; - }; -}; - -&mdio { - status = "okay"; - - switch@0 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie1 { - /* Marvell 88W8864, 5GHz-only */ - status = "okay"; -}; - -&pcie2 { - /* Marvell 88W8864, 2GHz-only */ - status = "okay"; -}; - -&pinctrl { - gpio_keys_pins: gpio-keys-pins { - /* mpp24: wps, mpp29: reset */ - marvell,pins = "mpp24", "mpp29"; - marvell,function = "gpio"; - }; - - gpio_leds_pins: gpio-leds-pins { - /* mpp54: sata, mpp55: power */ - marvell,pins = "mpp54", "mpp55"; - marvell,function = "gpio"; - }; - - usb3_1_vbus_pins: usb3_1-vbus-pins { - marvell,pins = "mpp50"; - marvell,function = "gpio"; - }; -}; - -&spi0 { - status = "disabled"; -}; - -&uart0 { - /* J10: VCC, NC, RX, NC, TX, GND */ - status = "okay"; -}; - -&usb0 { - /* USB part of the eSATA/USB 2.0 port */ - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - usb-phy = <&usb3_1_phy>; -}; - -&rtc { - /* No crystal connected to the internal RTC */ - status = "disabled"; -}; |