diff options
Diffstat (limited to 'dts/src/arm/armada-xp-axpwifiap.dts')
-rw-r--r-- | dts/src/arm/armada-xp-axpwifiap.dts | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/dts/src/arm/armada-xp-axpwifiap.dts b/dts/src/arm/armada-xp-axpwifiap.dts deleted file mode 100644 index 3e77b43378..0000000000 --- a/dts/src/arm/armada-xp-axpwifiap.dts +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Marvell RD-AXPWiFiAP. - * - * Note: this board is shipped with a new generation boot loader that - * remaps internal registers at 0xf1000000. Therefore, if earlyprintk - * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the - * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used. - * - * Copyright (C) 2013 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "armada-xp-mv78230.dtsi" - -/ { - model = "Marvell RD-AXPWiFiAP"; - compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - - internal-regs { - /* UART0 */ - serial@12000 { - status = "okay"; - }; - - /* UART1 */ - serial@12100 { - status = "okay"; - }; - - sata@a0000 { - nr-ports = <1>; - status = "okay"; - }; - - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&keys_pin>; - pinctrl-names = "default"; - - reset { - label = "Factory Reset Button"; - linux,code = <KEY_SETUP>; - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&pciec { - status = "okay"; - - /* First mini-PCIe port */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Renesas uPD720202 USB 3.0 controller */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; -}; - -&pinctrl { - pinctrl-0 = <&phy_int_pin>; - pinctrl-names = "default"; - - keys_pin: keys-pin { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - - phy_int_pin: phy-int-pin { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; -}; |